PAX Technology S90 Mobile Payment Terminal User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1095550
Application ID	3zY0aaBymP269uNks6MLxw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	37.57kB (469673 bits)
Date Submitted	2009-04-13 00:00:00
Date Available	2009-04-13 00:00:00
Creation Date	2009-04-07 11:30:48
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2009-04-11 13:51:55
Document Title	Microsoft Word - S90英文产品说明2008-09-27.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	huangxy

S90 Mobile Payment Terminal Use Manual
1、Product Description
Figure 1: Top View
Figure 2: Bottom View
Figure 3: Side View
Figure 4: SAM/SIM Card Slots
2、Installation
1）SAM Card Installation
① Open up battery cover, which is at the bottom of the terminal; ② Take out battery; ③
Insert SAM card to corresponding SAM card slot.
2）SIM/UIM Card Installation
① Open up battery cover, which is at the bottom of the terminal; ② Take out battery; ③
Insert SIM/UIM card to corresponding SIM/UIM card slot.
3）Battery Installation
① Hold the battery with its sticker facing up. ② Attach battery forelock to battery bayonet ;
③ Press down the other side of the battery.
3、Instructions
1）Power ON/FF
Power on: Press power switch button for 2 seconds until LED backlight is on, and the buzzer will
beep if POS is being turned on successfully.
Power off: Press power switch button for 2 seconds until the displaying content vanishes. POS is
being turned off.
2）Magnetic Stripe Card
When user swipes magnetic stripe card along the slot, the backside of the card, which contains
magnetic stripe information, should be facing to the terminal. Bi-directional swiping is supported.
It is recommended to swipe starting from the top of the terminal to the bottom of the terminal,
with a constant moving speed.
3）IC card
When user inserts IC card into the IC slot, the chip of IC card should be facing up; user is
recommended to gently insert the card, in order to avoid any physical damage to the card or the IC
slot of the terminal. If IC card is successfully read by the terminal, the IC card icon will be shown
on LCD display screen.
4）Tearing off receipt from the terminal
After the receipt is printed, pinch the end of the receipt and keep an angle of 45 degrees between
receipt and the cutter of the terminal; tear off the receipt swiftly.
4、Specifications
Default
CPU
Memory
Display
Keypad
Magnetic Card Reader
IC Card Reader
SAM Slots
Communication
Peripheral Ports
Printer
Battery
Power Supply
Working Environment
Storage Environment
Dimensions
Weight
Note:
32-bit, ARM9, 180MHz
8MB FLASH , 16MB SDRAM
128×64 pixel LCD, LED backlight
10 alphanumeric keys, 8 function keys,4 ATM keys and
1 switch [ON] key
Track 1/2/3, bi-directional swipe
1 user card (EMV2000)
2, ISO7816
GSM, GPRS
1 RS232, 1 power charge port, 1 Handset port
Thermal printer, Speed: 12.5 lines/sec
Paper width:58mm
Paper roll outside diameter:38mm
Li-ion battery, 1800mAh, 7.4V, Over 40 hours of standby time
Input: 100～240VAC，50Hz/60Hz，1.0A，
Output:9.5VDC，4A
Temperature: 0℃～50℃(32℉～120℉)
R.H.: 10%～90%( non-condense)
Temperature:－20℃～70℃(-4℉～150℉)
R.H.:5％～95％ (non-condense)
199mm x 87mm x 61.5mm (L x W x H)
485g
RSS232 Port only used as upgraded EUT by manufacturer
5、Battery Usage Tips
1）Do not assemble, squeeze, punch or short the battery.
2）Do not put battery into water or near fire.
3）Do not store battery in an environment with a temperature high than 70℃. Appropriate
storage temperature is between -20℃～70℃.
4）Do not use other chargers for recharge.
5）Keep the electrical contacts of battery away from other conductive material.
6）Do not use other batteries which are not manufactured by PAX
7）Do not charge battery in explosion hazardous area.
8）Do not assemble battery in explosion hazardous area.
6、Terminal Installation and Usage Tips
1）Do not damage electric wire and power adapter. If electric wire or power adapter is
damaged, please do not use the terminal any more.
2）Before power adapter is plugged into power socket, please make sure that voltage which
the power socket supplies is appropriate working voltage for the terminal.
3）Do not expose the terminal in sunshine, or in humid, hot, or dusty environment
4）Keep the terminal away from liquid material.
5）Do not plug any unknown material into any port of the terminal, since it may create serious
damage to the terminal.
6）If the terminal is defective, please contact professional POS repair technicians.
7）When installing paper roll, please be aware of the cutter within paper bracket.
8）Please use standard thermal paper, in order to protect the printer and avoid paper jam.
9）Do not assemble the terminal in explosion hazardous area.
Warning：
We declare that:
※ The product is installed with battery separately in the box. The FCC ID label is
placed on Mobile Payment Terminal clearly visible to all persons at the time of
purchase.
※ The user is cautioned that changes or modifications not expressly approved by the
manufacturer could void the user’s authority to operate the equipment.
※ This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
※ Do not attempt to disassemble the Mobile Payment Terminal and battery by
yourself. Non-expert handling of the devices may damage them.
※ Your Mobile Payment Terminal is a radio transmitter and receiver. It is designed
and manufactured not to exceed limits for exposure to radio frequency (RF) energy
set by the Federal Communications
※ Commission (FCC) of the U.S. Government. These limits are part of
comprehensive guidelines and establish permitted levels of RF energy for the general
population. The guidelines are based on standards that were developed by
independent scientific organizations through periodic and thorough evaluation of
scientific studies. The standards include a substantial safety margin designed to
assure the safety of all persons, regardless of age or health. The exposure standard
for Mobile Payment Terminal employs a unit of measurement known as the Specific
Absorption Rate, or SAR. The SAR limits set by the FCC are 1.6W/kg. Tests for SAR
are conducted using standard operating positions accepted by the FCC with the
Mobile Payment Terminal transmitting as its highest certified power level in all tested
frequency bands. Although the SAR is determined at the highest certified power level,
the actual SAR level of the phone while operating can be well below the maximum
value. This is because the Mobile Payment Termina is designed to operate at multiple
power levels so as to use only the power required to reach the network. In general,
the closer you are to a wireless base station, the lower the output power.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment .

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Extract
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2009:04:11 13:51:55-07:00
Create Date                     : 2009:04:07 11:30:48+08:00
Metadata Date                   : 2009:04:11 13:51:55-07:00
Document ID                     : uuid:7837cf98-2f5f-4d6a-b289-640bc807472a
Instance ID                     : uuid:fddd1302-c2d1-4ff1-a23d-9710ae8da5d2
Format                          : application/pdf
Title                           : Microsoft Word - S90英文产品说明2008-09-27.doc
Creator                         : huangxy
Page Count                      : 7
Author                          : huangxy

EXIF Metadata provided by EXIF.tools