PAX Technology S900WCDMA Wireless POS Terminal User Manual
PAX Technology Limited Wireless POS Terminal Users Manual
User manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2144596 |
| Application ID | e1isJ17+lDz22dhUi/n0lg== |
| Document Description | User manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 258.76kB (3234447 bits) |
| Date Submitted | 2013-12-17 00:00:00 |
| Date Available | 2014-06-15 00:00:00 |
| Creation Date | 2017-10-24 14:12:14 |
| Producing Software | GPL Ghostscript 9.18 |
| Document Lastmod | 2017-10-24 14:12:14 |
| Document Title | Users Manual |
| Document Creator | CorelDRAW |
| Document Author: | sunxx |
@341 x Installation Manual
8900
Mobile PaymentTerminal
PIN 200312000000139
PAX TECHNOLOGY LIMITED reserves
the right to change product technology
specificatinns without notifying.
00:.41"
PAX TECHNOLOGY LIMITED
Room 24m, 24’F._ un Hung Km Cenue, 30
Uarbom Road, Wanchai, (mg Kong
Tc] +Bszrzsxx 3m 1 252722023300
Frmml, dnnIeKqI/pux com 11k
Webmmtwwwpax com‘lk PAX TECHNOLOGY UMITED
®
@m
Product Description
'\ LCD stmay
\ Magnehcsmp
\ Card 5m
\mcm Key
Keypad
Ic Cam sxm
Cuncr
Pnn 1 :‘nm Hmnc
Rub 'r Pad
'zmcglah:
“ Power Charge
R3235 \Port
SAM Card 51m
®
@m
Installation
1) SAM Card Installation
(E Open up battery cover. which is at the bottom oi the
terminal;
(2) Take out battery;
(z>lnsert SAM card to corresponding SAM card slot.
2) SIM Card Installation
@ Open up battery cover, which is at the bottom oi the
terminal
@Take out battery,
® insert SIM card to corresponding stM card slot
3) SD Card Installation
ii) Open up battery cover, which is at the bottom of the
terminal:
@Take out battery;
(2) Insert SD card to corresponding st: card slot.
4) Battery Installation
(l) Hold the battery with its sticker tacing up;
(D Attach battery iorelcck to battery bayonet;
La) Press down the other side oi the battery
Instruction
t) Power ON/OFF
Power on. Press “CANCEL" button tor 2 seconds until
LED backlight is on, it Pos terminal is being turned on
successlully,
Power ott: Press "CANCEL" button tor 2 seconds until
the displaying content vanishes. POS terminal is being
turned on
2) Magnetic stripe Card
When user swipes magnetic stripe card along the slot,
the backside of the card which contains magnetic stripe
information, should be racing to the terminal Bi»directicnal
swiping is supported it is recummended to swipe starting
trom the top ot the terminal to the bottom ot the terminal
with a constant moving speed,
a) to card
When user inserts IC card into the IC slot, the chip oi IC
card should be iacing up; user is recommended to gently
insert the card. in order to avoid any physical damage to the
card or the IC slot oi the terminal tr IC card is successiully
read by the terminal, the IC card icon Will be shown on LCD
display screen,
lcc Operation Process
Before inserting the to card, please check inside and
around the it: card slot it there is any suspicious obiecl,
please don‘t insert card and immediately report to the
relevant stair
®
@m
A) Tearing all receipt Irorn tne terminai
Aller the receipt is printed, pinch tne end oitne receipt
and keep an angle of 45 degrees between receipt and tne
culler of tne lerrninal; lear omne recelpt sWiIlly,
Specifications
Default
CPU 32—bit, ARMll
Memory 54MB DDR RAM , 128MB NAND Flash
Display 35 ~lnch 240x320 pixel color TFT LCD;
LED backlight;
Toucn Screen: support Eiectmnlc signalure
Keypad: 1o alpnanurneric keys,8 functional keys
Magnetic Card Reader Track 1/2/3, bidirectional swipe
IC Card Reader 1 user card (EMV2DOO)
SAM slots: 1) SIM sIol1 + SAM slot 3(wlthout SD slot)
2) SIM slot 2 + SAM slot 2( Wilnout SD slot)
3) SIM slot 1 + SAM slot 2 r SD sioH
4) SAM slut 3(WiFi , wlthoul SD slot)
5) SAM slot 3 s SD slot 1(wiFi)
Communication GSMGPRS, or WCDMA or WiFi-BT
Peripherai Ports: 1 R5232 port
1 USB port
1 Power cnarge pon
Printer: Tnerrnal prlnter; Speed 18 lines/sec:
PaperWidtn 53mm
Paper roll outside diameler 35mm
input 100—240V Ac, 1 0A sn/enI-lz
Output 9 av DC 2 5A
Battery: Li-ion bttery,1850rnAn.7.Av
Working Environment:
Temperaiiire: 0'C-50'C(32“l"~ 1221:)
R H.: 10%~93%(nonacondense)
Storage Environment:
Temperatureezu c~7o C (VA'F— 1587’)
R H.:5%~95%(nonacondense)
Power Supply
Dimensions: 175mm x 52mm x 63mm (L x w x H)
Welghl 3349
Optional:
Support SD card
Built-In WlFi—BT module (no GSM,GPRS or WCDMA)
Double SIM slots
Buiitaln contaetless card reader module (ISO/IEC 14443
Type A/B: Milare ”(Felice/NFC, card sensing area: LCD
screen)
10/20 barcode scanner
Installation and Usage Tips
1) Do not damage eiectllc Wire and power adapter ll
electric Wire or power adapter is damaged , please do not
®
@m
use the terminal any more
2) Before power adapter is plugged into power socket,
please make sure that vollage which llie power sockel
supplies is appropriate working voltage for the terminal
3) Do not expose the terminal in sunshine, or in humid,
hot. or dusty environment
4) Keep the terminal away from liquid material
5) Do not plug any unknown material into any port oi the
terminal, since it may create serious damage to the
terminal.
6)llthe terminal is detective, please contact proiessional
Pos repair technicians.
7) When installing paper roll, please be aware ol the
cutter within paper bracket
3) Please use slandard thermal paper, in order to
protecl the prinler and avoid paper jam
9) Do nol assemble the terminal in explosion hazardous
area.
Baneg Usage Tlgs
‘l) Charge indoor by PAX charger, where is cool and
well ventilated;
2) Do not apart the battery,
3) Do nol short circuil lhe battery,
4) Keep lhe battery away lrom sunshine, smog and dust,
5) Do not squeeze, punch the baltery, pul it into liquid or
near fire.
5) Keep way lrom eniiironmenl which is too hot , loo
cold, damp and highly explosive;
7) Once a lailure happens such as heating or distortion,
or it was broken down. Please change new battery,
8) Change new battery if it cannot satisfy your
requirement;
9) Change new battery it using more than two years.
Any Changes or modifications not expressly approved
by the party responsible for compliance could void the
user's authorily to operate the equlpmenl
This devlce cumplles wilh pan to oi the FCC Rules
Operaliorl is sub)eol to the tollowing two condilions (t ) This
device may not cause harmlul interlerence, and (2) this
device must accept any interlerence received. lncluding
interlerence that may cause undesired operation
Specific Absorption Rate (SAR) intormation
Thls Wireless phone meets the government's
requirements tor exposure to radio waves
The guidelines are based on standards that were
developed by independent scientific organizations through
periodic and thorough evaluation oi scientific studies The
slandards include a substantial saiety margin designed to
assure the safety oi all persons regardless ofage or health
The exposure slandard lor wireless mobile phones
@541
employs a unit or measurement known as the Speclflc
Absorption Rate, or SAR, The SAR limit set by the FCC is
l 6 WIN;
RF Exposure Informat (SA
This device is designed and manuraolured not to
exceed the emission limits tor exposure to radio lreouensy
(RF) energy set by the Federal Communlcalions
Commission ol the United States
During SAR testing, this device was set to transmit at
its highest Certified power level in all tested lreouency
bands, and placed in positions that simulate RF exposure
in usage near the body With the separation or 0 mm
Although the SAR is determined at the highest certlfied
power level the actual SAR level of the devlce while
operating can be well below the maximum value This is
because the deirice is designed to operate at multiple
power levels so as to use only the power required to reach
the network in general, the closer you are to a wireless
base station antenna the lower the power output.
The exposure standard tor wireless devices employing
a unit of measurement is known as the Specific Absorption
Rate, or SAR. The SAR limit set by the FCC is bevwxg
PAXTECHN GYLIM‘TE
Fur Ihls device for usage near the budy is 1 EDW/kg
While there may be differences between the SAR levels
ol various devices and at various positions. they all meet
the government requirements.
SAR compliance tor bodyswom operation is based on a
separation distance of 0 mm between the unit and the
human body
rcc big-lath”: i
Thu mnblk bbobe (Umplle vmh pm 13 or be rec Ruks opeaioii u suijcl bi flu rationing
nib (vudlllom (I) ms devloe may iioi cm naminit ibiereeibe siia (1) ms deuce mm
mm bi, mlaiermbe received. ibdiiuibg mic-{um the: may mtg undated abandon
no mobile boobs m beer [did an: found lo obiiibty with me tbiiiiisrbi zCAa§ B digiist deuce,
pummltnl’zlISAfmFCCRflanmdaptdwpnmrmkpmmm
wmflmmiumoemamdmmmsallmvn Thumulymmlmmmdun
rm ndlo bobboicy aim and it iioi button and uxd iii mam wiib ibe iiisbiicboiis
oeyambmbiiimoemtamiammebobs Hmwectbneobagimmm
ibrerteebbe bill bbi bani. iii a mmlax mm 11 ibis abuiyiiieiii dues (aux baibiriii
Inmfaenm mndm at ieieiiboii mpbaii b-biab mi he mm by iiiiiiiiig me eqiiibiiieiii afi
baa ob ibe in u mmunged ibby moaned the “influence by one a man cube (aflowmg
more b
ernmA w,i :dommk mung anknul
amaze me wanton helm meequrpriieiii and Wives
,cbbiieei Lbe equip“: iiita an outlet ab : aroiii Maren! mi ibai ia iy-biab the [ma is
mend .
«Comm! the dealer or an experts-ml mic rv iboiiiimii tor rielo .
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Extract, Print high-res XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Format : application/pdf Creator : sunxx Title : S900英文说明书(功能键盘) Creation Date--Text : Mod Date--Text : Producer : Corel PDF Engine Version 3.0.0.667 Trapped : False Creator Tool : CorelDRAW Modify Date : 2013:12:17 09:42:12+08:00 Metadata Date : 2013:12:17 09:42:12+08:00 GTS PDFX Version : PDF/X-3:2002 Document ID : uuid:40f0633d-6f55-4ff9-9045-4424c577b674 Instance ID : uuid:c5313b4b-845f-4fb1-99c8-254e9f73e6b3 Page Count : 6 Author : sunxx Create Date : D:20131129015654EXIF Metadata provided by EXIF.tools