PAX Technology SP20V4 PINPAD User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3199611
Application ID	GF4VPh4Ee3BDQ12u8eIKXQ==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	1.49kB (18630 bits)
Date Submitted	2016-11-18 00:00:00
Date Available	2017-05-18 00:00:00
Creation Date	2016-11-16 14:38:03
Producing Software	GPL Ghostscript 9.10
Document Lastmod	2016-11-16 14:38:03
Document Title	User manual
Document Creator	PDFCreator Version 1.7.3
Document Author:	amqian

PINPAD Instruction Manual
(SP20 V4)
1. Instructions
PINPAD connect to POS or ECR by a communication line for entering password during
transaction process. In order to correct using, you should refer to following instructions.
1）Tap contactless card (optional).
Put the contactless card into the right sensing area .
2. Installation and Usage Tips
1）Avoid putting the terminal in direct sunlight, high temperature, moist, or dusty environment.
2）Forbid non-professional to repair the terminal.
3）when you found some suspicious objects , must report to related administrator.
4）Working Environment
Storage Environment
Temperature: 0℃～50℃(32℉～122℉)
R.H.: 10%～93%( non-condense)
Temperature:-20℃～70℃(-4℉～158℉)
R.H.: 10%～93%( non-condense)
3. Password Entering Tips:
It is highly recommended to enter password as following ways:
1）Set up peep shields. Enter password with shield by the structures of cashier desk;
2）Place the POS terminal at an appropriate angle and make sure it is difficult to peer the password.
For example, the POS was installed above the movable bracket.
3）In enter password perspective, avoid surrounding video surveillance;
4）Paste text instructions to remind the customers to shelter with body or palm when enter
password.
5）Merchants can also choose other ways to protect the customer input password.
PAX TECHNOLOGY LIMITED
To know more product details, please visit http://www.pax.com.cn
P/N:2003120000001 99
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate this equipment.
Radiation Exposure Statement:
This equipment complies complies with FCC’s RF radiation exposure limits for general
population without SAR evaluation.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Modify, Annotate, Fill forms, Extract, Assemble, Print high-res
Page Count                      : 2
Warning                         : XMP format error (no closing tag for I)
Producer                        : GPL Ghostscript 9.10
Create Date                     : 2016:11:16 14:38:03+08:00
Modify Date                     : 2016:11:16 14:38:03+08:00
Author                          : amqian
Creator                         : PDFCreator Version 1.7.3
Subject                         : 
Title                           : User manual

EXIF Metadata provided by EXIF.tools