PBM PGRM-2 IN GROUND POOL ALARM User Manual Poolguard Inground Manual Rev 10 2 07 qxp
PBM Industries Inc IN GROUND POOL ALARM Poolguard Inground Manual Rev 10 2 07 qxp
PBM >
users manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 888743 |
| Application ID | jcA3L1vrlGHcb1OZc2r0FQ== |
| Document Description | users manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 256.05kB (3200572 bits) |
| Date Submitted | 2008-01-14 00:00:00 |
| Date Available | 2008-02-29 00:00:00 |
| Creation Date | 2007-10-25 09:49:32 |
| Producing Software | Acrobat Distiller 7.0.5 (Windows) |
| Document Lastmod | 2008-01-14 13:49:47 |
| Document Title | Poolguard Inground Manual Rev 10.2.07.qxp |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | Mike Green |
Foolguard® Mm IMPORTANT OPERATING INSTRUCTIONS MANUAL HELPFUL HINTS & TIPS “MEETS REQUIREMENTS OF ASTM SAFETY SPECIFICATION F 2208” <6 <> MODEL PGRM - 2 85dB Horn at 10 Feet This product has been designed to aid in the detection of unwanted intrusions into unsupervised pools. POOLGUARD IS A SAFETY ALARM SYSTEM AND NOT A LIFE SAVING DEVICE. “This device is not intended to replace any other safety consideration — i.e., adult supervision, lifeguards, fences, gates, pool covers, locks, etc., and some devices may not detect gradual entry." GENERAL POOLGUARD is the result of quality design and manufacturing techniques that are a standard at PBM Industries, Inc.; a company dedicated to high quality products. POOLGUARD is a result of that dedication and we guarantee and stand behind the POOLGUARD alarm system. POOLGUARD Pool Alarms have been tested and comply to the ASTM Safety and Performance Standard for Pool Alarms, ASTM F 2208, see insert. POOLGUARD is an electronic monitoring system that automatically sounds an alarm when children or pets fall into your unsupervised pool. POOLGUARD is a portable, self-contained, lightweight unit that is safe and simple to operate. Entry into the pool will be detected by the unit’s electronic sensor, triggering a loud pulsating alarm and an internal RF transmitter. The remote receiver will receive the transmitted signal and sound an alarm within the home. INSPECTION POOLGUARD is packaged in a shipping carton that minimizes the chance of damage due to handling. Check for damage and confirm that the con- tents of the carton include the following items: - POOLGUARD Unit 0 Handle 'Remote Receiver and Power Supply -Operating Instructions Manual -Warranty and Registration Card If an item is missing, contact either the place of purchase or PBM Industries, Inc. for replacement. CARE AND HANDLING POOLGUARD is constructed from sturdy plastic to withstand the adverse moisture environment of a swimming pool. Care needs to be taken when handling to ensure against being dropped, kicked, etc. Also, be sure to remove the pool unit and set it away from activity in the upright position when the pool is being used, (See Figure 1). If the pool unit accidentally falls into your pool, remove it immediately and drain the water from it. Take the unit apart as indicated in the Battery Replacement Procedure and remove the battery. Tip and shake unit and remove all excess water from inside the unit and the battery, and the circuit board area with a paper towel or cloth. Completely test unit before each use as described in manual to ensure proper operation. (Remember to always remove the pool unit from the pool while swimming and set it aside away from pool activity). ATTACHING HANDLE The two handle screws are located in the top of the alarm, remove them and attach the handle, (See Figure 1). INSTALLING YOUR ALARM RESET/SLEEP SWITCH $SEE FIGURE 1) RESET: When the pool unit is installed in the pool and the horn is sounding; press the reset/sleep switch once to silence the alarm. SLEEP MODE: When the pool unit is removed from the pool and the horn is sounding; press and hold the reset/sleep switch for 3 seconds to silence the alarm. The pool unit will automatically wake up when it is installed into the pool. THE POOL UNIT WILL NOT GO INTO SLEEP MODE ONCE IT IS INSTALLED IN THE POOL! SILENT INSTALLATION AND REMOVAL FEATURE - The poolguard system will sound an alarm (Horn will sound) when you install or remove the pool unit from your pool. If you would like the poolguard system not to sound an alarm (horn will not sound) when you install or remove the pool unit from your pool, follow the directions below. 1.SILENT INSTALLATION (HORN WILL NOT SOUND) ° Press and hold the reset/sleep switch for 3 seconds, until you hear the pool units horn chirp. Release the reset/sleep switch, you now have 15 seconds to gently and slowly install the pool unit into your pool without the horn sounding. POOLGUARD WILL INSTANTLY BE MONITORING YOUR POOL FOR AN INTRUSION. 2. SILENT REMOVAL (HORN WILL NOT SOUND) - Before removing the pool unit from your pool. Press and hold the reset/sleep switch for 3 seconds, until you hear the pool units horn chirp. Release the reset/sleep switch, you now have 5 seconds to remove the pool unit from your pool without the horn sounding. IMPORTANT: THIS DOES NOT TURN POOLGUARD OFF, IF THE POOL UNIT IS NOT REMOVED IT WILL CONTINUE TO MONITOR YOUR POOL FOR AN INTRUSION. (Cont. on next page) a SILENT INSTALLATION AND REMOVAL FEATURE Wont! 3. POOLGUARD HAS DESIGNED THIS FEATURE FOR “ONLY”THOSE WHO HAVE THE RESPONSIBILITY OF INSTALLING OR REMOVING THE ALARM FROM YOUR POOL! BATTERY INSTALLATION / REPLACEMENT (Battery not included) POOLGUARD is powered by a standard 9 -volt alkaline battery. To install or replace the battery: - Remove the screw from the bottom of the unit, (See Figure 1). -Carefully slide out electronics assembly; do not pull or jerk on internal hook up cable. (If necessary, gently shake unit to remove assembly.) - Remove old battery and check for leakage or corrosion. (Remove any leakage or corrosion if present before installing new battery.) -IMPORTANT: WHEN A 9V BATTERY IS FIRST INSTALLED IN THE POOL UNIT, THE HORN WILL SOUND. T0 SILENCE THE ALARM PRESS AND HOLD THE RESET/SLEEP SWITCH FOR 3 SECONDS. THIS PLACES THE POOL UNIT IN SLEEP MODE. THE POOL UNIT WILL AUTOMATICALLY WAKE UP WHEN IT IS INSTALLED INTO THE POOL. - Install new battery by attaching snap connection and sliding into battery holder. -Slide electronics assembly into pool unit; do not pinch internal hookup cable. -Replace the screw, hand tighten until screw is all the way in and flush against the pool unit. To prevent possible damage, battery should be removed whenever storing the alarm, for an extended period of time. LOW BATTERY FUNCTION The POOL UNIT AND THE REMOTE RECEIVER will beep once approximately every 20 seconds to alert you that the battery is low in the pool unit and needs to be replaced. HANDLE SCREWS ELECTRONICS ASSEMBLY POOL UNIT FIGURE 1 HORN Girls at 10 test BATTERY HOOKUP RESET/SLEEP HOLDER CABLE SWITCH UPRIGHT POSITION PLACEMENT IN YOUR POOL Figure 2 illustrates locations best suited for detecting intrusions from any area of the pool. If your pool is larger than 800 square feet, if you have more than 2 return lines, any concerns about the size, or if you have an irregular shaped pool or water features such as waterfalls, please call customer service to clarify the recommended number of alarms and locations for alarms: 1-800-242-7163. Poolguard Pool Alarms have been tested and comply to the ASTM Standard Specifications for Pool Alarms ASTM F 2208, in a 16’ x 32’ pool. POOLGUARD alarms can be used in pools up to 20’ x 40’ or 800 square feet. F-@- FIGURE 2 Pools 800 Square Feet and Smaller. (Cont. on next page) PLACEMENT IN YOUR POOL (Continued) POOLGUARD automatically compensates for variations in pool levels within the unit’s operating range. The unit utilizes a sensing throat which projects into the water and is designed to operate in most pools with an in-wall skimmer. The sensing throat cannot be less than 2 inches, (See Figure 3), and not more than 7 inches into the water, POOLGUARD recommends that the sensing throat be approximately 4" in the water POOLGUARD can be used with SOLAR BLANKETS on the pool. POOLGUARD can also be used in spas. SUPPORT BLOCK SENSING THROAT CANNOT BE LESSTHAN 2” IN THE WATER, POOLGUARD RECOMMENDS THAT - THE SENSING THROAT BE APPROXIMATELY 4” IN —) TH E WATER w IMPORTANT POOLGUARD may not function properly if your pools water level is not maintained within the required levels of your alarm. Also, the unit may not operate effectively while certain types of automatic pool cleaners are in operation. Some irregular shaped decks may not provide a level foundation for the unit by the pools edge. This minor problem can be overcome by appropriately supporting the unit, (See Figure 3). STABILIZING YOUR POOL ALARM The Alarm Stabilizing Pin (ASP) is factory installed onto your pool alarm. Tools needed to install your alarm are: One 5/16” masonry drill bit that can be found at your local hardware store, a drill, a pencil, a tape measure or yard stick. 1. Position your pool alarm so that the sensing throat is in the water and the ASP is touching the deck, (leave a small space no more than 3/8” between the sensing throat and the top edge of your deck or coping), (See Figure 4). 2. Mark with a pencil the spot where you wish to drill the hole for the ASP. 3. With the 5/16" masonry drill bit, drill a hole 2 1/4" inches deep, as straight as possible. (Cont. on next page) STABILIZING YOUR POOL ALARM (Continued) 4. Clean off the debris and install the alarm by placing the ASP into the 5/16” diameter by 2 1/4” deep hole. 5. Your Pool Alarm is now ready for use. If you have any questions or need help with installation, please give us a call at 1-800-242-7163. 6. Be sure to keep your ASP hole clean from debris and dirt so that your alarm will always lay flat on the pool deck when installed. REMEMBER THAT THE POOL UNIT MUST BE REMOVED FROM POOL BEFORE SWIMMING! MARK LOCATION FOR 5116" DIAMETER & 2 1/4" ALARMS STABILIZING PI DEEP HOLE |N DECK POOL DECK SMALL SPACE, NO MORE SENSING THAN 3/8 THROA AAA _ FIGURE 4 WATER LEVEL Sensing throat cannot be less than 2" in the water, POOLGUARD recommends that the sensing throat be approximately 4" in the water. TEST BEFORE USING To ensure effectiveness, test POOLGUARD every time you place it into the pool by performing the following procedure: OPOOLGUARD DOES NOT HAVE AN ON/OFF SWITCH When the alarm is in the pool it is always in the ON position and cannot be turned off. When the alarm is out of the pool it is always in the OFF position. -To test your alarm push an object of appropriate volume and weight off the deck edge at the farthest location from the alarm. (A four (4) gallon jug of water or 3-one (1) gallon jugs of water tied together are ideal for testing.) The alarm should sound when the water action caused by the intrusion reaches the unit. It may take a few seconds for the alarm to react to the water action. (Cont. on next page) TEST BEFORE USING gcontinued! 'After resetting the alarm and allowing time for the water action to settle, repeat the procedure from another point in the pool until you are confident of detection performance. -POOLGUARD includes a timer function which automatically resets the unit after the alarm has sounded for approximately 5 minutes. ADJUSTING YOUR RETURN LINE FITTINGS The POOLGUARD alarm should not be placed too close to a return line, also do not place POOLGUARD in a location in the pool where a return line is pointing in the alarms direction. Water turbulence may be too strong, falsely setting the alarm off or the water turbulence may interfere with the alarms ability to detect an intrusion. If you have more than 2 return lines please call customer service at 1-800-242-7163. It is very important in pools to adjust all the eyeball fittings on your return lines so that the water flow will not interfere with your pool alarm. Point all the eyeball fittings down and your pool will still circulate properly and this will allow POOLGUARD to function properly, (See Fgure 5). Pointing the eyeball fittings down also helps prevent algae growth. FIGURE 5 CORRECT INCORRECT POOLGUARD REMOTE RECEIVER The POOLGUARD REMOTE RECEIVER has been integrated with the standard POOLGUARD unit to provide a wireless remote alert operating at distances of up to 200 feet. The POOLGUARD REMOTE RECEIVER sounds an alarm in the house when the POOLGUARD unit is activated at the pool.The remote system consists of the following functional elements: -A coded pulse receiver (Remote Receiver), (See Figure 6). -A standard wall outlet power supply, (See Figure 6). The REMOTE RECEIVER is a compact unit powered by a UL and CSA approved AC/DC power supply. The REMOTE RECEIVER can be placed on a table or a counter top inside the house. The pulse coded radio frequency signal is transmitted from the pool unit and is received and decoded to sound the remote receiver. The remote receiver will sound for an additional 3 seconds after the pool unit has been silenced. If the REMOTE RECEIVER beeps once approximately every 20 seconds, it is indicating that the SW battery in the pool unit is low and needs to be replaced. After you have purchased your POOLGUARD alarm and you wish to add another remote receiver to your alarm system you can acquire one from PBM Industries, Inc. Contact PBM by phone or mail or contact your place of purchase. 85dB Horn at 10 feet POWER SUPPLY—> NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT. 4— REMOTE RECEIVER FIGURE 6 TO OPERATE YOUR REMOTE RECEIVER Try to locate your REMOTE RECEIVER in a convenient part of your house close to the pool. Avoid steel walls or any other large metal objects or obstructions that might interfere with the signal reception. The REMOTE RECEIVER has to be placed on the same level or a level above the pool in the house (do not place receiver in an underground basement). The ideal location for your REMOTE RECEIVER would be by a window overlooking your pool. Test your REMOTE RECEIVER in different locations in your house to find the best working place for your receiver. Connect the power supply to any 120V, electrical outlet and insert the jack into the receiver. Check that indicator light is on.Your REMOTE RECEIVER unit is now ready to receive a transmission from your POOLGUARD unit. DO NOT USE YOUR REMOTE RECEIVER OUTDOORS. SWIMMING POOL SAFETY TIPS -Supervise children at all times. oNever permit swimming alone. Never leave a child alone, even to answer the telephone. oAIways remove the entire solar cover from a pool before swimming. 0Ftemember that alcohol and water safety do not mix. -Have your pool area fenced and the gate locked to prevent unauthorized entry to the pool, and install a gate alarm. -Lock and secure all doors in the house which permit easy access to the pool, and install a door alarm. -Have a responsible adult teach swimming and water safety to your children. 0Maintain clean, clear water in the pool. -Do not swim during electrical storms. -Do not permit bottles, glass, or sharp objects to be used around the pool. -Ask your pool dealer how you can improve your pool safety — they will be glad to assist you. -Above all: remember that common sense, awareness, and caution will allow you to enjoy your pool. WARRANTY AND REPAIRS POOLGUARD is sold with a limited warranty to cover defects in parts and workmanship for three years from date of purchase, (retain proof of purchase). If POOLGUARD exhibits a defect, please call Customer Service at 1-800-242-7163. Unauthorized returns will not be accepted. Proper repair is only ensured when the unit is returned to the manufacturer. SEND CORRESPONDENCE TO: PBM mnusrales, INC. P.O.BOX 658, NORTH VERNON, IN 47265 1-800-242-7163 This product has been designed to aid in the detection of unwanted intrusions into unsupervised pools. POOLGUARD IS A SAFETY ALARM SYSTEM AND NOT A LIFE SAVING DEVICE. ”This device is not intended to replace any other safely consideration - i.e., adult supervision, lifeguards, fences, gates, pool covers, locks, etc, and some devices may not detect gradual entry.” oolguard' """ I’M APSP Qggg} (E PBMiNDusTmEs, mo. mgifyvgjgmg’fi REV. 10/2007 HELPFUL HINTS AND TROUBLESHOOTING Foolguard‘gg PowevSuI FALSE ALARMS Rem—ege Reeeve. All pool alarms will false alarm on occasion for different reasons. False alarms can be minimized; however, it is important to remember that a false alarm is better than no alarm at all. WEATHER & WIND—POOLGUARD sets stationary on the deck of the pool so the wind will not effect the alarm unit itself. Wind may trigger a false alarm if it is strong enough or steady enough that it causes the water in the pool to rock or bounce up and down the pool wall. When the water in the pool moves up and down the POOLGUARD sensing throat, it may finally cause the alarm to sound. On extremely windy days when the pool water is rocking it is advised to remove the POOLGUARD from the pool. Light wind or rain will not effect the POOLGUARD alarm. Another false alarm occurs when the pool owner tries to install the alarm too soon after swimming. After swimming, the water in the pool will rock or bounce up and down the pool wall for some time depending on the size of the pool and the type of swimming activity. Before installing the alarm, after swimming, the pool must be given time to calm. Time will vary (around 10 to 30 minutes); once the pool owner sees that the pool water is no longer rocking up and down the pool wall, it is time to install the alarm. Certain automatic cleaners may set the POOLGUARD unit off in some cases. If the cleaner head or the cleaner hose hits the POOLGUARD alarm it may cause it to false alarm. Solutions to this problem are to use your cleaner at night and your alarm during the day. Another option would be to find a place around the pool where the cleaner does not interfere with the alarm. Certain water features such as waterfalls can cause POOLGUARD to false alarm. To avoid this problem do not install the POOLGUARD alarm too close to the water feature. If you are having a problem with any type of water feature call POOLGUARD at 1-800-242-7163. i J ALARM PLACEMENT The alarm should be on a flat, solid surface for best results. The throat of the unit is designed to work in most pools with an in-wall skimmer. The water level up on the throat is important and should be checked. The sensing throat cannot be less than 2 inches in the water, and not more than 7 inches into the water. POOLGUARD recommends that the sensing throat be approximately 4 inches in the water. POOLGUARD can be used with a solar cover; however, before removing the cover, the alarm should be taken out so it does not get pulled into the pool. ALARM TESTING Drop something of approximate size, weight and volume of the families smallest child, the farthest point away from the alarm. A four (4) gallon jug of water or 3 one (1) gallon jugs of water tied together are ideal for testing. Remember, when testing you must wait about 15 minutes between tests for the pool to calm. ALARM WILL NOT SOUND Be sure that a 9 volt battery has been installed properly. If you are testing and POOLGUARD does not alarm, be sure you are testing properly — putting your feet in the pool, splashing with your hands, making waves with a leaf skimmer, or dropping something into the pool that does not have the proper size, weight and volume will not set the POOLGUARD alarm off! Testing is very important and should be done correctly. CARE AND HANDLING POOLGUARD is made of sturdy, rigid vinyl PVC - UV rated. Because the alarm is electronic and mechanical great care should be taken not to drop the unit; like any other appliance, it may break. Sun and rain will not hurt the alarm. POOLGUARD is water resistant but not waterproof. Great care should be taken not to knock the alarm into the pool. If the alarm goes into the pool there are directions in the manual on how to dry it out, but more than likely it will have to be returned to the factory for service. Always remember to remove the alarm before using the pool. GB REMOTE RECEIVER When the unit at the pool alarms, the remote receiver will sound. Maximum Range for the remote is 200 feet from the poolside unit. Avoid placing remote in basements or close to metal walls. Be sure that the red light on the remote is on. Remember the poolside unit must be beeping (alarming) for the remote to work. If your remote receiver is not getting a clear signal or no signal from the poolside unit, try the following: Before plugging in the power supply, be sure to stretch out the cord; do not leave it tied in a bow as packaged. When you first plug in the remote it will give one short loud beep then stop. Your Remote Receiver is similar to a small portable radio. If your remote is not sounding when the poolside unit is sounding—move the remote to different locations and stand back for a few seconds for the remote to pick up the signal. You may only have to move your remote a little to the left or right to bring in the signal—in some cases you might have to move the remote to a different location or another room. If you cannot get a signal on your remote receiver CALL CUSTOMER SERVICE AT 1-800-242-7163 QUICK DO’S AND DON’TS - DO read the manual carefully - DO install a 9 volt battery o DO untie the bow on the power supply - DO test the alarm properly 0 DO carry your alarm by the handle 0 DO remove alarm before swimming 0 DO hold on to your red customer service card W|th our 800 serwce number - DON’T leave alarm in pool while swimming - DON’T drop your alarm, it may break o DON’T knock or let your alarm fall into the pool - DO_N’T install your alarm immediately after SW|mm|ng - DON’T use your alarm on extremely windy days IN GROUND POOL ALARM WITH REMOTE GATE ALARM POOLGUARD POOL ALARMS “BEST SOLUTION” GOOD HOUSEKEEPING MAGAZINE 7/wnameqoucanhud, dime/9&2. Poolguard’s Family of Products Helps Protect Your Family! www.poolguard.com ABOVE GROUND POOL ALARM WITH REMOTE DOOR ALARM Call Toll Free 1-800-242-7163
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : 3.1-702 Producer : Acrobat Distiller 7.0.5 (Windows) Create Date : 2007:10:25 09:49:32-04:00 Creator Tool : PScript5.dll Version 5.2.2 Modify Date : 2008:01:14 13:49:47-05:00 Metadata Date : 2008:01:14 13:49:47-05:00 Format : application/pdf Creator : Mike Green Title : Poolguard Inground Manual Rev 10.2.07.qxp Document ID : uuid:7e442b0f-9a1f-4bc5-aaff-66bc63bd8cc3 Instance ID : uuid:eabfb291-13f9-4256-be70-87858e61c20e Page Count : 16 Author : Mike GreenEXIF Metadata provided by EXIF.tools