Quick Start Guide Samsung Galaxy J1 2016 SM J120W

User Manual: PDF Quick Start Guide Samsung User Guides

Open the PDF directly: View PDF PDF.
Page Count: 2

DownloadQuick Start Guide Samsung Galaxy J1 2016 SM-J120W
Open PDF In BrowserView PDF
Device layout
To turn on the device, press and hold the Power key
for a few seconds.

QUICK
START
GUIDE
SM-J120W

Installing the SIM or USIM card
and battery

Charging the battery

Safety information

Before using the device for the first time, you must
charge the battery.

Read all safety information before using the device to ensure
safe and proper use.

Only nanoSIM cards work with the device.

Warning

Do not insert a memory card into the SIM
card slot.

Follow the warning information provided below to
prevent incidents such as fire or explosion

Power key
Volume key

The charger should remain close to the
electric socket and easily accessible while
charging.

Home key

Back key

Recents key

2

Accessing more information
Visit www.samsung.com/ca to view device
information, the user manual, and more.

Multipurpose jack

1

• The user manual may not be available

depending on the web browser or service
provider.

• Do not expose the device to physical impact or damage.
-- Do not carry your device in your back pockets or on
your waist.
-- Store spare batteries in an appropriate protective case.
• Use manufacturer-approved batteries, chargers,
accessories, and supplies.
• Prevent the multipurpose jack and battery terminals from
contacting conductive elements, such as metal or liquids.
• Do not touch the device with wet hands. Also, do not use
the device in humid environments, such as rest rooms, or
during water-based activities, such as swimming.
• If any part of the device is cracked or broken, or if
the device becomes very hot, stop using the device
immediately and take it to a Samsung Service Centre.
• Do not turn on or use the device when the battery
compartment is exposed.

• You may incur additional charges for
accessing the Internet.

Printed in Korea
GH68-45878A Rev.1.0
English (CAN). 03/2016

J120W_QSG_ENG.indd 1

3/9/2016 11:53:13 AM

To transfer data of the previous device to a new
device: Visit www.samsung.com/smartswitch for more
information.

The actual available capacity of the internal memory is
less than the specified capacity because the operating
system and default apps occupy part of the memory.
The available capacity may change when you update
the device.

You can download and install firmware updates to
upgrade your device’s software with the firmware
over-the-air (FOTA) service. To check for available
→ Settings → About device
firmware update, tap
→ Software update.

Follow the warnings below to prevent injury to
people or damage to the device
• Do not allow children or animals to chew or suck the
device.
• Do not poke eyes, ears, or other body parts with the device
or insert the device into the mouth.
• If the device has a camera flash or light, do not use it close
to the eyes of people or animals.
• The device can be used in locations with an ambient
temperature of 0°C to 35°C. You can store the device at an
ambient temperature of -20°C to 50°C. Using or storing the
device outside of the recommended temperature ranges
may damage the device or reduce the battery’s lifespan.
• Do not store your device near or in heaters, microwaves,
cooking equipment, or high pressure containers.
• Keep your device dry.
• Do not use your device outdoor during a thunderstorm.
• Comply with all safety warnings and regulations regarding
mobile device usage while operating a vehicle.
To prevent possible hearing damage when
using a headset, do not listen to sound at high
volume for long periods.

→ Settings
To view the full safety information, tap
→ About device → Legal information → Safety
information.
Some content may differ from your device depending on the
region, service provider, or software version, and is subject to
change without prior notice.
Copyright © 2016 Samsung Electronics

J120W_QSG_ENG.indd 2

Acknowledging Special Precautions
and Industry Canada Notice

Specific Absorption Rate (SAR)
certification information

Cautions

The SAR is a value that corresponds to the relative amount
of RF energy absorbed in the head of a user of a wireless
handset.
The SAR value of a phone is the result of an extensive testing,
measuring and calculation process. It does not represent
how much RF the phone emits. All phone models are tested
at their highest value in strict laboratory settings. But when
in operation, the SAR of a phone can be substantially less
than the level reported to Industry Canada. This is because
of a variety of factors including its proximity to a base station
antenna, phone design and other factors. What is important
to remember is that each phone meets strict federal
guidelines. Variations in SARs do not represent a variation
in safety.
All phones must meet the federal standard, which
incorporates a substantial margin of safety. As stated above,
variations in SAR values between different model phones
do not mean variations in safety. SAR values at or below the
federal standard of 1.6 W/kg are considered safe for use by
the public.
The highest reported SAR values for the SM-J120W are:
Head : 0.98 W/kg
Body : 1.06 W/kg
This phone has been tested and meets RF exposure
guidelines when used with an accessory that contains no
metal and that positions the mobile device a minimum of
1.5 cm from the body.
Organizations such as the World Health Organization and
the US Food and Drug Administration have suggested that
if people are concerned and want to reduce their exposure,

Any changes or modifications to your device not expressly
approved in this document could void your warranty for this
equipment, and void your authority to operate this equipment.
Only use approved chargers. The use of any unauthorized
accessories may be dangerous and void the warranty if said
accessories cause damage or a defect to the device.
Although your device is quite sturdy, it is a complex piece
of equipment and can be broken. Avoid dropping, hitting,
bending, or sitting on it.

Information to User
This equipment has been tested and found to comply
with the limits of a Class B digital device. These limits are
designed to provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation; if this equipment does cause
harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one
or more of the following measures:
• Reorient/relocate the receiving antenna.
• Increase separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.

they could use a hands-free accessory to keep the wireless
device away from the head and body during use, or reduce
the amount of time spent using the device. For more
information, visit www.samsung.com/sar and search for your
device with the model number.

Correct disposal of batteries in
this product
This device contains a LiIon battery. For safe disposal options,
contact your nearest service centre. For information on
battery replacement, please contact your service provider.
Do not disassemble, crush, or puncture the device. Do not
dispose of it in a fire.

•
•

Be sure to dispose of your device properly. In some
areas, the disposal of batteries in household or
business trash may be prohibited.
For safety, do not handle the device if the LiIon
battery is damaged or leaking.

IC Notice
This device complies with Industry Canada licence exempt
RSS standard(s). Operation is subject to the following two
conditions:

1
2

This device may not cause interference,
This device must accept any interference, including
interference that may cause undesired operation of the
device.

3/9/2016 11:53:13 AM



Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.6-c111 79.158366, 2015/09/25-01:12:00
Create Date                     : 2016:03:09 11:53:13-05:00
Metadata Date                   : 2016:03:09 11:53:13-05:00
Modify Date                     : 2016:03:09 11:53:13-05:00
Creator Tool                    : Adobe InDesign CC 2015 (Windows)
Instance ID                     : uuid:56215c8f-afdb-4f3f-8c5d-ae7a013f703b
Original Document ID            : xmp.did:4E2DCB0CA1A0E1118F7CDBEDF97EAA78
Document ID                     : xmp.id:c55906dc-3225-c641-abff-575f3cc632c3
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:4b7a3d0b-e6cf-d941-9fce-d385da08d717
Derived From Document ID        : xmp.did:a37d35a1-0210-444f-9384-ccf3eb1c63de
Derived From Original Document ID: xmp.did:4E2DCB0CA1A0E1118F7CDBEDF97EAA78
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2015 (Windows)
History Changed                 : /
History When                    : 2016:03:09 11:53:13-05:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
Page Count                      : 2
Creator                         : Adobe InDesign CC 2015 (Windows)
EXIF Metadata provided by EXIF.tools

Navigation menu