Quick Start Guide Netcomm 3g25w R Hspa Rocket Hub

User Manual: PDF Quick Start Guide NetComm Rocket Hub User Guides

Open the PDF directly: View PDF .
Page Count: 4

3G25W-R

Internet only

ROCKET™ HUB

QUICK START GUIDE

3G25W-R Quick Start Guide V2.indd 1 16/02/2011 9:37:04 AM

Hardware Installation

1. Insert your Rogers SIM card (until you hear a click) into

the SIM slot.

2. Attach the supplied antenna to the connector labeled

3G Antenna on the rear panel.

3. Connect the power adapter to the Power Socket on the

back of the Rocket™ hub.

4. Plug the power adapter into the wall and power on.

5. Wait approximately 60 seconds for the Rocket™ hub

to power up.

3G25W-R Quick Start Guide V2.indd 2 16/02/2011 9:37:10 AM

Connecting via cable

1. Connect the supplied yellow Ethernet cable to one of

the LAN ports at the back of the Rocket™ hub.

2. Connect the other end of the yellow Ethernet cable to

your computer.

3. Wait approximately 30 seconds for the connection

to establish.

4. You will now be connected to the internet.

3G25W-R Quick Start Guide V2.indd 3 16/02/2011 9:37:11 AM

Connecting Wirelessly

1. Ensure wireless networking is enabled on your device

(computer/laptop/smartphone).

2. Scan for wireless networks and connect to the network

name that matches the Wireless Network Name found

on the wireless security card (included in the box).

3. When prompted for your wireless security password,

enter the Wireless Security Key listed on your wireless

security card.

4. Wait approximately 30 seconds for the connection

to establish.

5. To connect additional devices, repeat steps 1-4.

ROCKET™ HUB / CENTRALE SANS-FIL

WIRELESS SECURITY CARD / CARTE DE SÉCURITÉ SANS-FIL

Wireless Network Name (SSID):

Nom de réseau sans-fil (SSID):

xxxxxxxxxxxxxxxxxxxxxx

Wireless Security Key (WPA):

Clé de sécurité sans-fil (WPA):

xxxxxxxxxxxxxxxxxxxxxx

3G25W-R Quick Start Guide V2.indd 4 16/02/2011 9:37:12 AM