PDI Communication System CV2600N LCD TV User Manual

PDI Communication System, Inc. LCD TV

User manual

Download: PDI Communication System CV2600N LCD TV User Manual
Mirror Download [FCC.gov]PDI Communication System CV2600N LCD TV User Manual
Document ID1866052
Application IDqdP7U6ym0UONw5wxPL12fQ==
Document DescriptionUser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize472.89kB (5911148 bits)
Date Submitted2012-12-21 00:00:00
Date Available2012-12-21 00:00:00
Creation Date2011-04-12 07:55:18
Producing SoftwareAdobe PDF Library 9.9
Document Lastmod2012-12-21 09:02:48
Document TitleUser manual
Document CreatorAdobe InDesign CS5 (7.0.3)

PDI Communication Systems
26” and 32”
Healthcare LCD TV
User Manual
Models
PDI-CV2600
PDI-CV3200
Document Number:
Number: PD196-167R2
PD196-167R2
Document
Healthcare Grade Television
The PDI Healthcare series television is specifically designed for installation
and use in a healthcare environment. The TV’s special design and safety
features have been investigated by the Underwriters Laboratory and
Listed for use in Hospitals, Nursing Facilities, Dialysis Clinics, and similar
healthcare services.
CAUTION
RISK OF ELECTRIC
SHOCK
DO NOT OPEN !
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK)
NO USER SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
SERVICING
User Servicing
If your product is not operating correctly or exhibits a marked change in
performance and you are unable to restore normal operation by following the
detailed procedure in its operating instructions, do not attempt to service it
yourself as opening or removing covers may expose you to dangerous voltage
or other hazards. Refer all servicing to qualified service personnel.
This lightning flash with arrowhead symbol
within an equilateral triangle is intended to
alert the user to the presence of uninsulated
dangerous voltage within the product’s
enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
Damage Requiring Service
Unplug this product from the wall outlet and refer servicing to qualified
service personnel under the following conditions:
•
When the power supply cord or plug is damaged.
•
If liquid has been spilled, or objects have fallen into the product.
•
If the product has been exposed to rain or water.
•
If the product does not operate normally by following the operating
instructions. Adjust only those controls that are covered by the
operating instructions as an improper adjustment of other controls
may result in damage and will often require extensive work by a
qualified technician to restore the product to its normal operation.
•
If the product has been dropped or damaged in any way.
•
When the product exhibits a distinct change in performance which
indicates a need for service.
The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the product.
WARNING: To reduce the risk of fire or electric shock, do
not expose this apparatus to rain or moisture.
WARNING: To prevent injury, this apparatus must be
securely attached to the floor/wall in accordance with the
installation instructions.
Replacement Parts
WARNING: Do not install this equipment in a confined
space such as a bookcase or similar unit.
When replacement parts are required, be sure the service technician has
used replacement parts specified by the manufacturer or have the same
characteristics as the original part. Unauthorized substitutions may result in
fire, electric shock, or other hazards.
CAUTION: Do not block ventilation openings. Install in
accordance with the manufacturer’s instructions.
Safety Check
REGULATORY INFORMATION
FCC Part 15
Cleaning & Disinfecting
Upon completion of any service or repairs to this product, ask the service
technician to perform safety checks to determine that the product is in safe
operating conditions.
•
•
•
•
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, many cause harmful interference to radio
communications.
However, there is not guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from
that to which the receive is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Unplug the TV Before Cleaning.
Use a soft damp cloth to clean.
Do not use harsh chemicals such as solvents.
Wipe off water droplets from the cabinet and screen as soon as possible as they may leave spots.
Modifications
Any changes or modifications made to this device that are not expressly approved by PDI may void the user’s authority to operate the equipment.
Cables
Connections to this device must be made with shielded cables with metallic
RFI/EMI connector hoods to maintain compliance with FCC Rules and
Regulations.
Document Number: PD196-167R2
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the
manufacturer.
12. Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or
sold with the apparatus. When a cart
is used, use caution when moving the
cart/apparatus combination to avoid
injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
15. This appliance should be mounted to a wall or
ceiling only as recommended by the manufacturer.
16. Care should be taken so that objects do no fall
and liquids are not spilled into the enclosure through
openings.
17. If an outside antenna or cable system is connected
to the video product, be sure the antenna or cable
system is grounded so as to provide some protection
against voltage surges and built-up static charges.
Section 810 of the National Electrical Code, ANSI/
NFPA 70, provides information with respect to proper
grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna discharge
unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes,
and requirements for the grounding electrode. See
Figure A.
NEC – NATIONAL ELECTRICAL CODE
ANTENNA
LEAD IN
WIRE
GROUND
CLAMP
ELECTRIC
SERVICE
EQUIPMENT
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810 – 20)
GROUNDING CONDUCTORS
(NEC SECTION 810 – 21)
GROUND CLAMPS
FIG. A
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
NOTE: This reminder is provided to call the CATV
system installer’s attention to article 820-40 of the NEC
that provides guidelines for proper grounding and,
in particular, specifies that the cable ground shall be
connected to the grounding system of the building, as
close to the point of cable entry as practical.
Document Number: PD196-167R2
OPTIONAL ACCESSORIES
The following optional accessories are available for your PDI Healthcare television.
Patient Remotes
Programming Remotes
POWER
POWER
SETUP
MUTE
LAST
VOL
OK
VOL
OK
TV/AV
PSM.
TV/FM
CC
ARC
CH
SSM
PSM
Page
Down
MTS/SAP.
POWER
MUTE
SAP
CH
VOL
CV2600 Table Stand CV1003
CH LIST
LAST
CH
Page
Up
MUTE
TV/FM
TV/AV
SLEEP
CC.
OK
TEXT
SIZE
INDEX
REVEAL
HOLD
MODE
MIX
UPDATE
CODE
SLEEP LAST
CC
ARC
SAP
TV/FM
TV/AV
SUBPAGE
SLEEP
ARC
SETUP
CV1001 PD108-420
PD108-421 PD108-427
CV1000 (Not Pictured)
CV3200 Table Stand CV1004
INSTALLATION
3” min.
LOCATION
Locate a mounting position on the foot wall in front of
the hospital bed. Other locations may be used depending
upon the mounting means and room type. Healthcare
televisions are normally mounted near the ceiling to
provide needed clearance. A minimum 3 inch spacing is
recommened for cooling.
Note: Ceiling mounted fluorescent lights and windows
may produce unwanted glare and should be considered
when selecting a mounting location.
200 mm
200 mm
M4 Screws Required
TV MOUNT
The PDI Healthcare television utilizes a VESA pattern.
Selection of an appropriate mount will depend primarily
upon the mount’s capacity and intended functionality.
Install the TV as recommended by the mount’s
manufacturer. Please note the correct mounting screw
size requirements.
200 mm
400 mm
PDI also offers compatible TV mounts. Please refer to
the installation instructions that pack with each mount
for additional details.
PDI TV MODEL
MOUNT MODEL
CV2600
PD168-033
CV3200
PD168-204
CV2600
CV3200
M6 Screws Required
Document Number: PD196-167R2
PILLOW SPEAKER CONNECTIONS
PILLOW SPEAKER STYLES
Control of the TV is possible using either a single-button Analog or
multi-button Digital style pillow speaker (neither supplied with TV).
TV PILLOW SPEAKER WIRING
The PDI Healthcare television series utilizes the industry standard
3-wire interface via a 1/4 inch stereo jack located on the back of the TV.
Additionally, the TV employes a universal pillow speaker interface that
can be configured to operate with many different model pillow speakers.
Move the pillow speaker slide switch located next to the Pillow Jack
to match the appropriate style pillow speaker. Refer to your nurse call
system wiring instructions for the pillow speaker’s bed side connections.
Slide Switch Position
CR
OFF
CP
CZ
TV
Pillow Speaker Type
RCA
Disables Pillow Speaker Control
Phillips
Zenith and Analog
ANALOG
DIGITAL
DATA
SOUND
CR OFF CP CZ
COMMON
TO BEDSIDE
CONNECTION
PILLOW
TV CONNECTION
WARNING: Do Not Ground the Common wire
connection. Grounding the connection will
by-pass the TV’s pillow speaker isolation circuit
and increase the risk of electrical shock.
Document Number: PD196-167R2
TV CONTROLS & CONNECTIONS
TV Controls
Standard TV controls are located on the TV’s lower right cabinet side.
Basic control is provided.
TV/AV
Switches the TV between various Enabled
Sources. Press the button once to verify the current
sources. Press the button additional times to advance to
the next active source.
CC
Closed Caption (Sub-Title) control. Press the
button once to verify the current Closed Caption mode.
Press the button additional times to advance to the next
Closed Caption Mode.
CH▲/▼ Selects the next or previous channel. If a menu
item is active, selects the next or previous menu item.
VOL▲/▼ Increases or decreases the volume. If a menu
item is active, adjusts the menu items settings.
POWER
Turns TV On and Off.
TV Connections
The PDI CV series televisions offer connection jacks for many
different types of external devices such as DVD players, Game
Boxes, and other similar devices. Connections are located along
the back edge of the Television.
TV Connectors
Document Number: PD196-167R2
TV Connectors
ANT TV/FM
F Connector input jack for the hospital cable TV signal. NOTE: FM radio channels
are also received on this input.
MPEG4 Upgrade
USB Port for service use only.
CLONING
USB Port for cloning the TV. The TV can be programmed (cloned) from information
stored on a USB Flash Drive.
IN - L, R
Component Left and Right audio input jacks.
IN - Y, PB, PR
Component Video input jacks.
IN - Composite
Composite Video input jack.
IN - S-Video
S-Video Video input jack.
IN - L, R
Left and Right Audio input jacks common for both Composite or S-Video inputs.
OUT - Composite Video
Demodulated TV signal Composite output video.
OUT - Coaxial
Demodulated TV signal Digital audio output.
OUT - L, R
Demodulated TV signal Left and Right output audio.
OUT
HDMI2
HDMI signal input jack. Input for the high quality HDMI signal.
HDMI1
HDMI signal input jack. Input for the high quality HDMI signal.
VGA
VGA Video Input jack. The TV can be used as a computer monitor.
VGA AUDIO
PC Audio Input jack. The TV’s internal speakers can be used for computer sound.
COMM - CCI
Computer Control Interface jack. NOTE: DO NOT connect to a hospital’s data
network as damage will result to thel TV.
COMM - MTI
Multiple Television Interface jack. Use with external control boxes. NOTE: DO
NOT connect to a hospital’s data network as damage will result to the TV.
EXT +5V
External +5V Input for TV service diagnostics.
HOUR METER
Digital Readout of the TV’s hours.
PILLOW
Pillow Speaker Jack. See PILLOW SPEAKER CONNECTIONS for details.
CR-OFF-CP-CZ
Pillow Speaker compatibility switch. See PILLOW SPEAKER CONNECTIONS for
details.
Document Number: PD196-167R2
Programming the TV
SETUP
Connect the TV to a Cable TV signal before proceeding. Verify the
handheld remote control operates the TV.
1.
Press the setup button on the remote.
2.
From the Setup menu, select Channels.
■
■
■
■
■
■
■
■
Service Level
Picture
Sound
Channels
Features
OSD Language
Sources
FM Radio
Free
▶
▶
▶
▶
English
▶
▶
Position: 
Exit: SETUP
Next: 
Channel Setup
3.
In the Channels menu, select Signal. Set the signal to one appropriate to your healthcare facility. The possible choices are,
Cable STD Standard Cable TV
Cable IRC Incrementally Related Carrier
Cable HRC Harmonically Related Carrier
Air
Air (Antenna)
4.
In the Channels menu, select Auto Program.
■
■
■
■
■
■
■
■
■
Signal
Auto Program
Add/Delete Channels
Clear Service Level
Copy Service Level
Parental Control
Power On Channel
Channel Lock
Channel Memory Override
Cable STD
▶
▶
▶
▶
▶
▶
Disabled
Enabled
Position: 
Exit: SETUP
5.
In the Auto Program menu, select Mode. The TV can be set
to search and locate different styles of TV signals; Analog Only,
Digital Only, or both Analog and Digital channels. Select the
style of signal.
6.
In the Auto Program menu, select Channel Sequence and
select the manner in which channels are viewed. The possible
selections are:
Interleave A+D
Analog and Digital appear grouped together
All A then D		
Analog appear first, followed by Digital
7.
The Additional Digital Signal selection allows for auto programming of a second block of channels using a different signal
type. For example, first Auto Program the TV for CATV STD
signals, then use the Additional Digital Signal set to AIR provides
a second auto programming of air type signals to be included
in addition to the channels found during normal Auto Program
searching into the same Service Level.
8.
The TV offers 3 discrete groups of channels or Service Levels.
Free, Basic, or Premium can each be programmed and used as
needed. Select the desired Service Level to program.
9.
Press the Yes (Channel Up button) to begin Auto Programing or
No (Channel Down button) to exit. Auto Programming takes approximately 2 to 12 minutes.
Auto Program
■
■
■
■
■
■
Mode
Channel Sequence
Additional Digital Signal
Free
Basic
Premium
Analog Only
Interleave A+D
None
Programmed ▶
Blank ▶
Blank ▶
Position: 
Exit: SETUP
Next: 
Confirm Auto Program
■ Confirmation
Exit: SETUP
Next: 
▶
Yes 
No 
Document Number: PD196-167R2
Pillow Speaker Sound Setup
Proper setup of the TV’s Sound is required for use with a
wired Pillow Speaker. Setup involves disabling the TV’s
internal speakers and then setting the audio level to the
pillow speaker.
1. Press the setup button on the handheld programming
remote control.
2. From the Setup menu, select Sound.
SETUP
■
■
■
■
■
■
■
■
Service Level
Picture
Sound
Channels
Features
OSD Language
Sources
FM Radio
Free
▶
▶
▶
▶
English
▶
▶
Position: 
Exit: SETUP
Next: 
Sound
■
■
■
■
■
■
■
■
3. In the Sound menu, select Internal Speaker
Enable.
Balance
Minimum Volume
Maximum Volume
Power On Volume
Internal Speaker Enable
HDMI 1 Audio Port
HDMI 2 Audio Port
Composite /S-Video Sound Mode
100
Last
▶
HDMI 1
HDMI 2
L+R
Position: 
Exit: SETUP
Next: 
Internal Speaker Enable
4. In the Internal Speaker Enable menu select the
source you wish to disable. For television select TV.
■
■
■
■
■
■
■
■
■
Speaker
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
TV
Composite Video
S-VIDEO
Component 1
Component 2
HDMI 1
HDMI 2
PC-ANALOG
FM RADIO
Position: 
Exit: SETUP
5. For Pillow Speakers with a thumb wheel volume control, in the Sound Menu, select Minimum Volume,
and set the level to approximately 50% to provide a
fixed level of sound for the pillow speaker to adjust.
NOTE: Pillow Speakers with dedicated Volume Up
and Volume Down buttons do not require a Minimum
Volume adjustment.
Sound
■
■
■
■
■
■
■
■
Balance
Minimum Volume
Maximum Volume
Power On Volume
Internal Speaker Enable
HDMI 1 Audio Port
HDMI 2 Audio Port
Composite/S-Video Sound Mode
Position: 
Exit: SETUP
Next: 
50
100
Last
▶
HDMI 1
HDMI 2
L+R
Next: 
Document Number: PD196-167R2
Programming the TV’s FM Radio
Connect the TV to a Cable TV signal before proceeding. Verify the
handheld remote control operates the TV.
1.
Press the setup button on the remote.
2.
From the Setup menu, select FM Radio. NOTE: if the FM Radio
item is non-selectable, enable FM Radio in the Sources menu
first.
SETUP
■
■
■
■
■
■
■
■
Service Level
Picture
Sound
Channels
Features
OSD Language
Sources
FM Radio
Free
▶
▶
▶
▶
English
▶
▶
Position: 
Exit: SETUP
Next: 
FM Radio Setup
3.
In the FM Radio Setup menu, select Auto Program. A
confirmation screen will appear.
■ Auto Program
■ Frequency
■ Add/Delete
▶
100.7 MHz
Added
Position: 
Exit: SETUP
Next: 
Confirm FM Radio Program
4.
In the Confirm FM Radio Program menu, press Channel
Up on the remote to begin or Channel Down to abort. The TV
will now search every available FM frequency and memorize
frequencies that contain radio stations. NOTE: FM radio signals
must be present on the coax input cable for the TV’s FM radio
feature to work properly.
■ Confirmation
Exit: SETUP
10
▶
Yes: 
No: 
Document Number: PD196-167R2
Troubleshooting
Problem
CHECK
•
No Picture and No Sound
•
•
•
No Picture, Sound OK
Picture OK, No Sound
•
•
•
•
•
No Sound from Internal TV Speaker
Ensure the TV is connected to a powered AC outlet. The TV’s front lamp
will glow Red when correctly connected to power.
Operate the TV directly by pressing the TV’s POWER button located on
the side of the cabinet.
Try to cycle power to the TV by pulling the power cord from the AC outlet,
wait for 30 seconds, plug it back into the outlet, wait 15 seconds or more
and then try to turn On the TV again.
Verify TV is set to an active Video Source or set directly to TV by pressing
the TV/AV button on the side of the TV or the TV/AV button on the remote
control.
If an Auxiliary Input Source is selected, verify the Video input signal cable
is connected and the video source is playing.
Verify the Sound has not been muted.
Check the Volume settings.
Verify pillow speaker is connected and the volume control on the pillow
speaker is properly adjusted.
If an Auxiliary Input Source is selected, verify the Audio input signal cable
is connected and the video source is playing.
•
•
Verify the sound has not been muted.
Verify the TV’s internal speakers have not been disabled in the “Internal
Speaker Enable” setup menu.
•
•
Check that external light sources, such as windows or overhead lights are
not creating glare on the TV’s screen.
Check the TV’s Brightness and Contrast settings in the TV’s Picture menu.
Picture is too Dark
•
Check the TV’s Brightness and Contrast settings in the TV’s Picture menu.
Picture Breaks-Up or Jitters
•
•
Verify the coax cable is connected correctly.
The cable TV signal may be too weak.
Picture has Ghost Images
•
•
The cable TV signal may be too weak.
The coax cable connection may be loose.
Picture has Stripes or Dots
•
•
The cable TV signal may be too weak.
The coax cable connection may be loose.
Pillow Speaker does not Control TV
•
•
Check the TV’s Pillow Speaker Selector switch is correctly set.
Replace Pillow Speaker.
Remote Control does not work
•
•
•
Replace the remote’s batteries.
Verify that strong fluorescent lights are not flooding the TV’s IR windows
For patient remote controls, verify remote is set to the correct Bed Code.
Picture is too Light
11
Document Number: PD196-167R2
Cloning the TV - Saving Settings
The TV settings can be saved to a USB Flash Drive and then used to
program another television. A specially prepared USB Flash Drive
(not supplied) is required. Please contact PDI to purchase this optional
item.
SAVING A TV’S SETTINGS
1.
Turn the TV On and insert the USB Flash Drive into the Cloning
USB Slot located on the back of the TV. A Cloning Main Menu
will appear when the Drive is properly installed.
2.
From the Cloning Main Menu, select Save Settings to USB.
Cloning Main Menu
■
■
■
■
Restore Settings to TV
Save Settings to USB
Download Firmware to TV
Information
▶
▶
▶
▶
Next: 
Position: 
3.
In the Save Settings to USB Drive menu, select the appropriate model. A confirmation menu will appear.
Save Settings to USB Drive
■ CV2600
■ CV3200
Back: 
4.
In the confirmation menu, select Channel Up for Yes to save the
settings. Otherwise, press Volume Down to exit without saving the
TV’s setting.
▶
▶
Next: 
Position: 
Save Settings to USB Drive
Overwrite CV2600.tdf
with settings from TV ?
5.
The USB Flash Drive can now be removed and used to program
another television with its settings.
Back: 
12
Yes: 
Document Number: PD196-167R2
Cloning the TV - Restoring Settings
A TV settings once saved to a USB Flash Drive and then be used to
program another television. A specially prepared USB Flash Drive
(not supplied) is required. Please contact PDI to purchase this optional
item.
RESTORE A TV’S SETTINGS
1.
Turn the TV On and insert the USB Flash Drive into the Cloning
USB Slot located on the back of the TV. A Cloning Main Menu
will appear when the Card is properly installed.
2.
From the Cloning Main Menu, select Restore Settings to
TV.
Cloning Main Menu
■
■
■
■
Restore Settings to TV
Save Settings to USB
Download Firmware to TV
Information
▶
▶
▶
▶
Next: 
Position: 
3.
In the Restore Settings to TV menu, select the appropriate
model. A confirmation menu will appear.
Restore Settings to TV
■ CV2600
■ CV3200
Back: 
4.
5.
Next: 
Position: 
Restore Settings to TV
In the confirmation menu, select Channel Up for Yes to restore the
settings. Otherwise, press Volume Down to exit without restoring
the TV’s setting.
Restore Settings
to TV from
CV2600.tdf?
The USB Flash can now be removed and the TV checked for correct programming.
Back: 
13
▶
▶
Yes: 
Document Number: PD196-167R2
TV Menu Navigation
Color Temperature
SETUP
■
■
■
■
■
■
■
■
Service Level
Picture
Sound
Channel Setup
Features
OSD Language
Source Setup
FM Radio
Picture
Free
▶
▶
▶
▶
English
▶
▶
Position: 
Exit: SETUP
Next: 
■
■
■
■
■
■
■
■
Brightness
Contrast
Color
Tint
Color Temp
Sharpness
PC Analog/HDMI Picture
Component Input Picture
50
50
50
50
▶
50
▶
▶
Position: 
Exit: SETUP
Balance
Minimum Volume
Maximum Volume
Power On Volume
Internal Speaker Enable
HDMI 1 Audio Port
HDMI 2 Audio Port
Composite/S-Video Mode
100
Last
▶
HDMI 1
HDMI 2
L+R
Position: 
Exit: SETUP
Channel Setup
■
■
■
■
■
■
■
■
■
Signal
Auto Program
Add/Delete Channels
Clear Service Level
Copy Service Level
Parental Control
Power On Channel
Channel Lock
Channel Memory Override
Position: 
Exit: SETUP
Next: 
■
■
■
■
■
■
Mode
Channel Sequence
Additional Digital Signal
Free
Basic
Premium
Analog Only
Interleave A+D
None
Programmed ▶
Blank ▶
Blank ▶
Position: 
Exit: SETUP
Next: 
PC Analog/HDMI Picture
■
■
■
■
■
■
■
Temperature
Clock
Phase
ARC
H-Position
V-Position
Auto
6500
50
50
16:9
50
50
Position: 
Exit: SETUP
Next: 
Next: 
Auto Program
Cable STD
▶
▶
▶
▶
▶
▶
Disabled
Enabled
Standard
Reddish
Greenish
Blueish
User
Next: 
Sound
■
■
■
■
■
■
■
■
■
■
■
■
■
Component 1/2 Input Picture
■
■
■
■
■
■
■
Temperature
Clock
Phase
ARC
H-Position
V-Position
Auto
6500
50
50
16:9
50
50
Position: 
Exit: SETUP
Position: 
Exit: SETUP
Next: 
Internal Speaker Enable
Next: 
Add/Delete Channel Service Level
■ Free
■ Basic
■ Premium
Programmed ▶
Blank ▶
Blank ▶
■
■
■
■
■
■
■
■
■
Speaker
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
TV
Composite Video
S-VIDEO
Component 1
Component 2
HDMI 1
HDMI 2
PC-ANALOG
FM RADIO
Position: 
Exit: SETUP
Position: 
Exit: SETUP
Next: 
Next: 
Confirm Auto Program
■ Confirmation
▶
Add/Delete Channels
■ Analog Channel
■ Add/Delete Analog Channel
■ Enable/Disable Digital Channel
Deleted
▶
Yes 
No 
Exit: SETUP
Position: 
Exit: SETUP
Next: 
Enable/Disable Digital Channels
7-1
7-2
16-1
16-2
16-3
16-4
16-5
44-315
77-7
77-9
WHIO HD
WHIO WX
16HD
16Again
16 Life
16 Ohio
16DT
Position: 
Exit: SETUP
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Next: 
Sample Channel Listing Shown for Illustrative purposes.
Actual Channel Listing will vary.
14
Document Number: PD196-167R2
TV Menu Navigation- continued
SETUP
■
■
■
■
■
■
■
■
Service Level
Picture
Sound
Channel Setup
Features
OSD Language
Source Setup
FM Radio
Clear Service Level
Free
▶
▶
▶
▶
English
▶
▶
Position: 
Exit: SETUP
Next: 
Programmed ▶
Blank ▶
Blank ▶
■ Confirmation
Position: 
Exit: SETUP
Next: 
Exit: SETUP
Channel Setup
■
■
■
■
■
■
■
■
■
Signal
Auto Program
Add/Delete Channels
Clear Service Level
Copy Service Level
Parental Control
Power On Channel
Channel Lock
Channel Memory Override
Position: 
Exit: SETUP
Confirm Clear
■ Free
■ Basic
■ Premium
Copy Service Level
Cable STD
▶
▶
▶
▶
▶
▶
Disabled
Enabled
Next: 
■ From: Free
Yes 
No 
Copy Service Level
To: Basic
Adjust From: 
Exit: SETUP
▶
▶
Adjust To: 
Next: 
■ From: Free
To: Basic
Adjust From: 
Exit: SETUP
▶
Adjust To: 
Next: 
Power On Channel
■ Free
■ Basic
■ Premium
Channel
12
Last
Last
Confirm Copy
■ Confirmation
Position: 
Exit: SETUP
▶
Next: 
Yes 
No 
Exit: SETUP
Parental Control
■
■
■
■
■
■
■
■
TV Rating
MPAA Rating
Advanced Rating
Advanced Rating Option
Change Password
Aux. Block Sources
Block Hour
Parental Lock
TV Rating
▶
▶
▶
Disabled
▶
Unblocked
Always
Disabled
Position: 
Exit: SETUP
Next: 
■
■
■
■
■
■
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
ALL FV L S V D
U U
U U U U
U U U U
U U U
Position: 
Exit: SETUP
Next: 
MPAA Rating
■
■
■
■
■
■
■
PG
PG-13
NC-17
No Rating
Position: 
Exit: SETUP
Next: 
Change Password
Enter Password
Confirm Password
-------
Exit: SETUP
15
Document Number: PD196-167R2
TV Menu Navigation- continued
Digital Captions
SETUP
■
■
■
■
■
■
■
■
Service Level
Picture
Sound
Channel Setup
Features
OSD Language
Source Setup
FM Radio
Position: 
Exit: SETUP
Features
Free
▶
▶
▶
▶
English
▶
▶
Next: 
■
■
■
■
■
■
■
■
■
■
■
■
■
Power On Caption Mode
Auto Power On
Power Management
Bed A/B
Caption Text Modes
Digital Captions
Digital Mode Time Setup
Diagnostics
Channel Up Power Off
Channel to other Sources
Power on ARC Mode
Slot Standby Power
Standby Power
Last
Disabled
Disabled
Disabled
▶
▶
▶
Disabled
Enabled
Last
Disabled
Low
Position: 
Exit: SETUP
Next: 
■
■
■
■
■
■
■
Mode
Font
Size
FG Color
BG Color
FG Opacity
BG Opacity
Default
Default
Default
Default
Default
Default
Default
Position: 
Exit: SETUP
Next: 
Digital Mode Time Stamp
■ Time Zone
■ Daylight Savings
Eastern
On
Source Setup
■
■
■
■
■
■
■
■
■
■
TV
Composite Video
S-VIDEO
Component 1
Component 2
HDMI 1
HDMI 2
PC-ANALOG
FM RADIO
Power on Source
Enabled/No APO
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
TV
Position: 
Exit: SETUP
APO = Auto Power off if no video
Position: 
Exit: SETUP
Next: 
Diagnostics
Next: 
■
■
■
■
■
■
■
Field ON Hours
Field Powered Hours
IO Firmware VSN
Main Firmware VSN
Pro:Idiom
Mpeg4
Bluethooth Firmware VSN
132
265
3.6
2.90
Support
1.0
1.0
Exit: SETUP
FM Radio Setup
Confirm FM Auto Program
■ Auto Program
■ Frequency
■ Add/Delete
▶
100.7 MHz
Added
■ Confirmation
Position: 
Exit: SETUP
Next: 
Exit: SETUP
16
▶
Yes 
No 
Document Number: PD196-167R2
TV Menu Explanations
Menu
Item
Explanation
Sub-Item
Explanation
Setup
Service Level
3 programmable Service
Levels (banks of channels)
plus a Disable service level.
Picture
Adjusts picture appearance.
Sound
Adjusts sound parameters.
Brightness
Adjust the brightness of the dark areas in the
picture. 50% is the default value.
Contrast
Adjust the brightness of the light areas in the
picture. 50% is the default value.
Color
Adjust the strength of the color in the picture.
50% is the default value.
Tint
Adjust the tint of the picture. 50% is the default
value.
Color Temperature
Opens a sub-menu that provides adjustment to
the color balance of the picture.
Sharpness
Adjust the amount of detail present in the
picture. 50% is the default value.
PC Analog/HDMI Picture
Opens a sub-menu that provides adjustment
to the picture when the TV is used in computer
mode.
Temperature: Color warmth of picture.
Clock: Adjust the horizontal screen size.
Phase: Removes horizontal noise.
ARC: Selects the screen size ratios.
H-Position: Move Picture left or right.
V-Position: Moves Picture up or down.
Auto: Automatically adjust picture.
Component Input Picture
Opens a sub-menu that provides adjustment to
the picture when viewing a component signal.
Temperature: Color warmth of picture.
Clock: Adjust the horizontal screen size.
Phase: Removes horizontal noise.
ARC: Selects the screen size ratios.
H-Position: Move Picture left or right.
V-Position: Moves Picture up or down.
Auto: Automatically adjust picture.
Balance
Moves sound between the Left and Right
Speakers.
Minimum Volume
Sets a minimum sound level. The TV’s sound
level can not be adjusted below the minimum
volume setting. The default value is 0.
Maximum Volume
Sets a maximum sound level. The TV’s sound
level can not be adjusted above the maximum
volume setting. The default value is 100.
Power On Volume
Sets an initial sound level when the TV is first
turned on. The default value is LAST.
Internal Speaker Enable
Opens a sub-menu that provide Disabling/
Enabling the TV’s internal speakers. Items are
shown in the default setting.
TV
Enabled
Composite Video
Enabled
S-VIDEO
Enabled
Component 1
Enabled
Component 2
Enabled
HDMI 1
Enabled
HDMI 2
Enabled
PC-Analog
Enabled
FM Radio
Enabled
HDMI 1 Audio Port
HDMI 2 Audio Port
Audio ports HDMI 1 or 2, PC, or Component 1
or 2 can be used as inputs for HDMI sound.
Composite/S-Video Mode
Adjust Composite/S-Video for L+L, L+R, or R+R
17
Document Number: PD196-167R2
TV Menu Explanations - continued
Menu
Item
Channel Setup
Explanation
Sub-Item
Explanation
Programs different channels and sources
into each of the 3 service levels
Signal
Sets the TV to tune 1 of 4 different signal
styles: Air, Cable STD, Cable IRC, Cable
HRC
Auto Program
TV automatically scans for active
channels and memorizes them into the
selected service level.
Mode
Scan for “Analog Only”, “Digital Only”, or
“Analog and Digital” channels.
Channel Sequence
Set the sequence in which the TV displays
channels.
Interleave A+D, Analog and Digital appear
grouped together. All A then D, Analog
appear first, followed by Digital.
Additional Digital
Signal
Provides a second auto search for channels
using a different signal type.
None
Disabled
Air
Antenna Tuning
Cable STD
Standard Cable
Cable IRC
Incremental Related Cable
Cable HRC
Harmonic Relate Cable
Free
One of three different service levels
(channel banks) used to hold different
groupings of channels.
Confirm Auto Program
Begins the Auto Program process. Auto
Program requires 2 to 12 minutes to
complete.
Basic
One of three different service levels
(channel banks) used to hold different
groupings of channels.
Confirm Auto Program
Begins the Auto Program process. Auto
Program requires 2 to 12 minutes to
complete.
Premium
One of three different service levels
(channel banks) used to hold different
groupings of channels.
Confirm Auto Program
Begins the Auto Program process. Auto
Program requires 2 to 12 minutes to
complete.
Analog Channel
Selects the channel to be edited.
Add/Delete Analog
Channel
Sets the indicated Analog channel to either
“Deleted” or “Added”.
Enable/Disable Digital
Channel
Displays a list of auto programmed Digital
Channels. Each channel can be “Enabled”
or “Disabled” for viewing.
Add/Delete
Channels
Add or Delete Channels from a Service
Level.
Free
Selects the Free service level edit menu.
Basic
Selects the Basic service level edit menu.
Premium
Selects the Premium service level edit
menu.
Clear Service
Level
Erase the programmed channels from a
service level. “Blank” indicates an empty
service level.
Free
Selects the Free Service level to Clear.
Confirm Clear
Confirmation Menu before clearing service
level.
Basic
Selects the Basic Service level to Clear.
Confirm Clear
Confirmation Menu before clearing service
level.
Premium
Selects the Premium Service level to
Clear.
Confirm Clear
Confirmation Menu before clearing service
level.
Confirm Copy
Confirmation Menu to before copying service
levels.
Copy Service
Level
Copy an existing service level to a destination service level.
From:
Sets the service level to be copied.
To:
Sets the service level to be programmed.
18
Document Number: PD196-167R2
TV Menu Explanations - continued
Menu
Item
Parental Control
Explanation
Sub-Item
Explanation
Control Access of TV and Movie content.
TV Rating
Displays a list of parental TV viewing levels
and allows for Blocking or Unblocking of
TV content.
MPAA Rating
Displays a list of parental Movie viewing
levels and allows for Blocking or
Unblocking of Movie content.
Advanced Rating
Digital TV content Rating levels listing
menu.
Advanced Rating
Option
Enable or Disable the Advanced Rating
menu for digital TV content.
Change Password
Displays a menu and allows creation of a
new parental password.
Aux. Block Sources
Enable or Disable the Aux. Block Source
item to restrict program content inputted
through the TV’s auxiliary inputs.
Block Hours
Sets the number of hours the parental lock
is enabled.
Parental Lock
Enable or Disable the settings in the Parental Control menus.
Power On Channel
TV displays a preset TV channel upon
initial powering for each service level.
Channel Lock
Enable or Disable the Channel Lock
feature. When Enabled the TV is locked
to the last channel viewed. Prevents the
TV from being tuned to any other channel
or source. Disabled allows the TV to be
tuned to other channels.
Channel Memory
Override
Enable means the TV will tune to all possible channels.
Disable means the TV can only be tuned to
channels in the currently selected service
level.
Free
TV powers on to this set channel
number. Entering “Last” causes the
TV to power on to the last channel
viewed.
Basic
TV powers on to this set channel
number. Entering “Last” causes the
TV to power on to the last channel
viewed.
Premium
TV powers on to this set channel
number. Entering “Last” causes the
TV to power on to the last channel
viewed.
Features
Power on Caption
Mode
Sets the Caption mode TV when the
powers On.
Off = TV powers on with captions disabled.
Last = TV powers on in last caption setting.
Auto Power On
TV remains On and can not be turned Off.
Power
Management
TV will turn Off after a preset period of
inactivity. Default is Disabled.
Bed A/B
Set the IR code for patient remote controls
for either Bed A or Bed B. Bed A is the
default setting.
Caption Text Mode
Teletext can be displayed on screen.
Enabled = Teletext turned on.
Disabled = Teletext off.
NOTE: Teletext is not readily available in
North America
19
Document Number: PD196-167R2
TV Menu Explanations - continued
Menu
Features
Item
Digital Captions
Digital Mode
Time Setup
Diagnostics
OSD
Language
Explanation
Sub-Item
Customize the look of captions when
tuned to a digital channel.
Timing information provided by Digital
channels can be set to the specific Time
Zone and also Daylight Savings.
A display menu that provides a readout
of the TV’s internal operations.
Channel Up
Power Off
When Enabled the TV shuts off when it
reaches the highest channel.
Channel to Other
Sources
When Enabled the External sources
connected to the TV appear in the TV’s
channel listing. If Disabled the External
sources do not appear in the TV’s channel listing.
Power on ARC
Mode
The TV can be set to turn On with a
specific picture Aspect Ratio: Last, 4:3,
14:9, 16:9, and 16:9 Panorama.
Slot Standby
Power
Turns power On or Off to Slot 1 and Slot
2 accessory slots.
Standby Power
Places TV in Low Standby Power or
Normal Standby Power Mode
Explanation
Font Size
Default, Small, Standard, Large
Font Style
Default, Style 0 thru Style 7
Foreground Color
Default, White, Black, Red, Green, Blue,
Yellow, Magenta, Cyan
Background Color
Default, White, Black, Red, Green, Blue,
Yellow, Magenta, Cyan
Foreground Opacity
Default, Solid, Translucent, Transparent,
Flashing
Background Opacity
Default, Solid, Translucent, Transparent,
Flashing
Edge Color
Default, White, Black, Red, Green, Blue,
Yellow, Magenta, Cyan
Edge Style
Default, None, Raised, Depressed, Uniform,
Left Drop Shadow, Right Drop Shadow,
Time Zone
Sets the current Time zone to Newfoundland,
Atlantic, Eastern, Central, Mountain, Pacific,
Alaska, Hawaii.
Daylight Saving
Turns Daylight Saving On, Off, or set to Auto
detect.
Field ON Hours
Readout of the number of hours the TV has
been turned On.
Field Power Hours
Readout of the number of hours the TV has
been plugged into a powered outlet.
IO Firmware VSN
IO firmware version resident inside the TV.
Main Firmware VSN
Main firmware version resident inside the TV.
Pro:Idom
Indicates presence of ProIdiom option.
Mpeg4
Firmware Version of Mpeg4 decoder
The menu system On Screen Display
language settings are English, Spanish,
and French
20
Document Number: PD196-167R2
TV Menu Explanations - continued
Menu
Item
Explanation
Sub-Item
Explanation
Setup
Source Setup
The individual auxiliary input connectors on the back
of the TV can be turned On
or Off.  The source can also
be set to Auto Power Off
(APO) after 5 minutes of a
no signal condition.
FM Radio
FM Radio Setup menu
21
TV
Disabled, Enabled/APO,
Enabled/No APO
Composite Video
Disabled, Enabled/APO,
Enabled/No APO
S-VIDEO
Disabled, Enabled/APO,
Enabled/No APO
Component 1
Disabled, Enabled/APO,
Enabled/No APO
Component 2
Disabled, Enabled/APO,
Enabled/No APO
HDMI 1
Disabled, Enabled/APO,
Enabled/No APO
HDMI 2
Disabled, Enabled/APO,
Enabled/No APO
PC-ANALOG
Disabled, Enabled/APO,
Enabled/No APO
FM RADIO
Disabled, Enabled
Power On Source
Last, (Any Enabled Source)
Auto Program
Automatic search for FM
radio stations present on
the connected coax cable.
Frequency
User selectable Frequency
Add/Delete
Add or Delete a Frequency
Document Number: PD196-167R2
This page intentionally blank.
22
Document Number: PD196-167R2
PDI Limited Warranty
PDI Communication Systems (PDI) warrants this product, except as set forth below, ONLY TO THE ORIGINAL
PURCHASER to be FREE FROM DEFECTIVE MATERIAL AND WORKMANSHIP from the date of original
purchase for a period of 2 years for parts and 2 years for labor (“The Warranty Period”). THIS LIMITED WARRANTY
IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE DISTRICT OF COLUMBIA, AND CANADA.
If this product is found to be defective, PDI will repair or replace defective parts at no charge to the original owner during
the warranty period. Such repair and replacement services shall be rendered by PDI or a PDI Authorized Servicer during
normal business hours. Parts used for replacement or repair are warranted only for the remainder of the Warranty Period.
To return a product for service please obtain a Return Material Authorization (RMA) from PDI. Products returned
without a RMA will not be serviced.
WHAT IS NOT COVERED
This limited warranty provided by PDI does NOT cover:
1. Product which has been subject to abuse, accident, alteration, modification, tampering, negligence, misuse,
faulty installation, lack of reasonable care, or if affixed to any attachment not specified for the product;
2. Product that has either the model number or serial number altered, tampered with, defaced or removed;
3. Initial installation and removal for repair;
4. Operational adjustments covered in the Owner’s Manual, normal maintenance, and cleaning;
5. Damage that occurs in shipment, due to act of God, and cosmetic damage;
6. Signal reception problems and failures due to line power surge;
7. The cost for shipping the product to PDI’s service center;
8. Accessories;
9. Batteries;
There are no expressed warranties except as listed above.
THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTY OF
MERCHANTABILITY, IS LIMITED TO THE DURATION OF THE EXPRESSED WARRANTY HEREIN. PDI
SHALL NOT BE LIABLE FOR THE LOSS OF USE OF THE PRODUCT, INCONVENIENCE, LOSS OR ANY
OTHER DAMAGES, WHETHER DIRECT, INCIDENTAL OR CONSEQUENTIAL RESULTING FROM THE
USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. ALL EXPRESSED
AND IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE WARRANTY PERIOD SET FORTH ABOVE.
Some states do not allow the exclusion of incidental or consequential damages or limitations on how
long an implied warranty lasts, so these limitations or exclusions may not apply to you. This warranty
gives you specific legal rights and you may also have other rights which vary from state to state.
Refurbished products carry a separate warranty. This warranty does not apply. For details of refurbished product
warranty, please refer to the refurbished product warranty information packaged with each refurbished product.
PDI Communication Systems, Inc.
40 Greenwood Lane
Springboro, Ohio 45066
PH: 937-743-6010
23
FX: 937-743-5664
Document Number: PD196-167R2
PDI Communication Systems, Inc.
40 Greenwood Lane
Springboro, Ohio 45066
24
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Tagged PDF                      : Yes
XMP Toolkit                     : 3.1-702
Create Date                     : 2011:04:12 07:55:18-04:00
Metadata Date                   : 2012:12:21 09:02:48+08:00
Modify Date                     : 2012:12:21 09:02:48+08:00
Creator Tool                    : Adobe InDesign CS5 (7.0.3)
Page Image Page Number          : 1, 2
Page Image Format               : JPEG, JPEG
Page Image Width                : 256, 256
Page Image Height               : 256, 256
Page Image                      : (Binary data 14511 bytes, use -b option to extract), (Binary data 11150 bytes, use -b option to extract)
Instance ID                     : uuid:4fd5dd0c-b804-40ea-a4b3-7ecbb3bb3565
Document ID                     : xmp.did:AECC1B74072068118083DB278CE3D265
Original Document ID            : xmp.did:F77F1174072068118A6DFB38BD2CE1EA
Rendition Class                 : proof:pdf
History Action                  : created, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved
History Instance ID             : xmp.iid:F77F1174072068118A6DFB38BD2CE1EA, xmp.iid:F87F1174072068118A6DFB38BD2CE1EA, xmp.iid:F97F1174072068118A6DFB38BD2CE1EA, xmp.iid:F97F1174072068118083909BE250D283, xmp.iid:FC7F1174072068118083909BE250D283, xmp.iid:06801174072068118083DC0908529597, xmp.iid:DB7E715F0B2068118083DC0908529597, xmp.iid:E17E715F0B2068118083DC0908529597, xmp.iid:5240E440112068118083DC0908529597, xmp.iid:FC7F117407206811808398CF171E4F7F, xmp.iid:FC7F1174072068118083A4F46BDFEE25, xmp.iid:FCB888140D2068118083A4F46BDFEE25, xmp.iid:03B988140D2068118083A4F46BDFEE25, xmp.iid:ABBC54BF2C2068118083A4F46BDFEE25, xmp.iid:08801174072068118083A43B4F52672C, xmp.iid:09801174072068118C14A76F3EC0D652, xmp.iid:E7991674072068118083EB5852D8DEA1, xmp.iid:7CFA1774072068118083829A65578EC4, xmp.iid:72185619082068118083829A65578EC4, xmp.iid:D8F31BFD342068118083829A65578EC4, xmp.iid:739D1574072068118083D035492081F7, xmp.iid:46610D8E072068118083D035492081F7, xmp.iid:1569DDAD072068118083D035492081F7, xmp.iid:C99257D4172068118083D035492081F7, xmp.iid:3EA71577092068118083EABE214F5DFE, xmp.iid:61EA1874072068118083CD34BCF845D7, xmp.iid:53A7C81F0D2068118083CD34BCF845D7, xmp.iid:30D4AB52122068118083CD34BCF845D7, xmp.iid:DD0B39F142206811808397895E0B6099, xmp.iid:58B41974072068118C14E4E424B1AAE2, xmp.iid:AB0B167407206811822AEDD17E9AA523, xmp.iid:BA2A16740720681180838690CCBEB9CF, xmp.iid:7EBA127407206811808394CB67C09210, xmp.iid:6A0C1674072068118083EA505F19D2BE, xmp.iid:6A1B1674072068118083F7784D820401, xmp.iid:CE3E1674072068118C14D3D0B5362020, xmp.iid:0631207407206811808399F39B5E72FC, xmp.iid:CEFA1A740720681180839958B206B46D, xmp.iid:647000D41820681180839958B206B46D, xmp.iid:91585A921A20681180839958B206B46D, xmp.iid:CB512374072068118083B9D2BF68EC3E, xmp.iid:448E018E082068118083B9D2BF68EC3E, xmp.iid:BF942274072068118083A12333491585, xmp.iid:D49DF887072068118083A12333491585, xmp.iid:059BC62E082068118083A12333491585, xmp.iid:3CAE2274072068118A6DE5BB0B6B83A5, xmp.iid:044FA52E132068118A6DE5BB0B6B83A5, xmp.iid:F9862A7407206811822A90462AD45C40, xmp.iid:F489F5150C206811822A90462AD45C40, xmp.iid:09B3DD9815206811822A90462AD45C40, xmp.iid:81AE152E18206811822A90462AD45C40, xmp.iid:BA4F570C26206811822A90462AD45C40, xmp.iid:ED3EC99231206811822A90462AD45C40, xmp.iid:4204F72243206811822A90462AD45C40, xmp.iid:E22DB28044206811822A90462AD45C40, xmp.iid:77D23B74072068118C14A3F9BC665037, xmp.iid:D7313B74072068118083C8B4F0DF0A48, xmp.iid:3C3E8A2C142068118083C8B4F0DF0A48, xmp.iid:DD05E705282068118083C8B4F0DF0A48, xmp.iid:EBBC3D99342068118083C8B4F0DF0A48, xmp.iid:F22BB778402068118083C8B4F0DF0A48, xmp.iid:7D313A740720681180838DCC7DA955DB, xmp.iid:7B723C74072068118083F9A1C27C03A9, xmp.iid:071785E6082068118083F9A1C27C03A9, xmp.iid:B82583FD172068118083F9A1C27C03A9, xmp.iid:47F94874072068118083CE721521B342, xmp.iid:04704745092068118083CE721521B342, xmp.iid:5458F77A0F2068118083CE721521B342, xmp.iid:16A83D7407206811808382F0C78273FB, xmp.iid:22F03E74072068118083CE2F1AB2383B, xmp.iid:D570E335092068118083CE2F1AB2383B, xmp.iid:C8F24F74072068118A6DEEB58B431A80, xmp.iid:C9F24F74072068118A6DEEB58B431A80, xmp.iid:124FE2B9072068118A6DEEB58B431A80, xmp.iid:EAAC1974072068118083AD7910182C8A, xmp.iid:73705AD2072068118083AD7910182C8A, xmp.iid:74705AD2072068118083AD7910182C8A, xmp.iid:8E4C410F082068118083AD7910182C8A, xmp.iid:5AFD3574072068118083B98E3CF435D8, xmp.iid:5BFD3574072068118083B98E3CF435D8, xmp.iid:F77F117407206811822AAE4B4527B89F, xmp.iid:3F913B7407206811822AAE4B4527B89F, xmp.iid:F77F117407206811822ADDE8B620D833, xmp.iid:2165447407206811822ADDE8B620D833, xmp.iid:C13216CE0F2068118083BFC5E896D85B, xmp.iid:C23216CE0F2068118083BFC5E896D85B, xmp.iid:2296A3B31B2068118083BFC5E896D85B, xmp.iid:872674831C2068118083BFC5E896D85B, xmp.iid:566F93D31C2068118083BFC5E896D85B, xmp.iid:78F196811D2068118083BFC5E896D85B, xmp.iid:D1C740740720681180838B6514910CBB, xmp.iid:D58F880B0820681180838B6514910CBB, xmp.iid:9A17CC9F0820681180838B6514910CBB, xmp.iid:F77F11740720681180839C326931BA0E, xmp.iid:54FE3C740720681180839C326931BA0E, xmp.iid:58773CAD0720681180839C326931BA0E, xmp.iid:872F3C74072068118C14EBFDAE7AF10B, xmp.iid:3492F7DC112068118C14EBFDAE7AF10B, xmp.iid:D9363A740720681180838BC450F0F1F1, xmp.iid:2388FE200820681180838BC450F0F1F1, xmp.iid:2BEB3D74072068118083E9323D46A65D, xmp.iid:2CEB3D74072068118083E9323D46A65D, xmp.iid:F77F1174072068118083DB278CE3D265, xmp.iid:AECC1B74072068118083DB278CE3D265, xmp.iid:4F9B1800112068118083DB278CE3D265, xmp.iid:5C104A8F112068118083DB278CE3D265, xmp.iid:8B55E574142068118083DB278CE3D265, xmp.iid:74642F643E2068118083DB278CE3D265, xmp.iid:2D4E3874072068118083CA83776FD57E, xmp.iid:1A8805EB512068118083F6C6ADC07472, xmp.iid:C63447B9072068118083B0B07101FE0C, xmp.iid:C26CA2E3232068118C14DFE36DDD02B2, xmp.iid:7AAB8BA02A2068118C14DFE36DDD02B2, xmp.iid:6CAD75DC2C2068118C14DFE36DDD02B2, xmp.iid:C3BB437407206811822AF61D2302445C, xmp.iid:48BA8F960F206811822AF61D2302445C, xmp.iid:46343F74072068118083F9FE5053D004
History When                    : 2010:07:23 11:07:56-04:00, 2010:07:23 13:56:12-04:00, 2010:07:23 13:56:12-04:00, 2010:07:27 09:42:55-04:00, 2010:07:27 11:46:27-04:00, 2010:07:27 15:39:18-04:00, 2010:07:27 16:07:22-04:00, 2010:07:27 16:22:02-04:00, 2010:07:27 16:49:27-04:00, 2010:07:28 13:23:46-04:00, 2010:08:02 12:22:32-04:00, 2010:08:02 13:02:49-04:00, 2010:08:02 16:40:29-04:00, 2010:08:02 16:49:29-04:00, 2010:08:03 14:32:10-04:00, 2010:08:03 16:38:37-04:00, 2010:08:04 09:42:04-04:00, 2010:08:04 11:00:05-04:00, 2010:08:04 11:04:43-04:00, 2010:08:04 16:26:02-04:00, 2010:08:05 08:16:55-04:00, 2010:08:05 08:17:38-04:00, 2010:08:05 08:18:32-04:00, 2010:08:05 10:14:08-04:00, 2010:08:05 11:45:43-04:00, 2010:08:09 11:19:27-04:00, 2010:08:09 12:00:02-04:00, 2010:08:09 12:37:15-04:00, 2010:08:10 16:37:27-04:00, 2010:08:30 11:57:11-04:00, 2010:08:30 14:29:59-04:00, 2010:08:30 17:09:36-04:00, 2010:09:01 11:11:31-04:00, 2010:09:01 11:46:29-04:00, 2010:09:01 13:05:07-04:00, 2010:09:01 15:43:55-04:00, 2010:09:02 09:38:33-04:00, 2010:09:07 14:06:58-04:00, 2010:09:07 16:11:20-04:00, 2010:09:07 16:23:49-04:00, 2010:09:08 09:41:25-04:00, 2010:09:08 09:49:18-04:00, 2010:09:08 10:20:08-04:00, 2010:09:08 10:20:41-04:00, 2010:09:08 10:25:21-04:00, 2010:09:10 15:10:58-04:00, 2010:09:10 16:34:55-04:00, 2010:09:13 09:15:56-04:00, 2010:09:13 09:49:05-04:00, 2010:09:13 10:57:10-04:00, 2010:09:13 11:15:39-04:00, 2010:09:13 12:54:56-04:00, 2010:09:13 14:17:26-04:00, 2010:09:13 16:23:09-04:00, 2010:09:13 16:32:55-04:00, 2010:09:14 08:14:36-04:00, 2010:09:14 10:06:06-04:00, 2010:09:14 11:37:09-04:00, 2010:09:14 13:59:14-04:00, 2010:09:14 15:29:15-04:00, 2010:09:14 16:54:14-04:00, 2010:09:15 11:57:53-04:00, 2010:09:15 13:45:22-04:00, 2010:09:15 13:55:43-04:00, 2010:09:15 15:43:44-04:00, 2010:09:16 10:02:17-04:00, 2010:09:16 10:15:17-04:00, 2010:09:16 10:59:44-04:00, 2010:09:17 09:13:07-04:00, 2010:10:04 11:35:44-04:00, 2010:10:04 11:48:18-04:00, 2010:10:06 13:45:59-04:00, 2010:10:06 13:45:59-04:00, 2010:10:06 13:47:55-04:00, 2010:10:11 12:51:11-04:00, 2010:10:11 12:53:49-04:00, 2010:10:11 12:55:31-04:00, 2010:10:11 12:55:31-04:00, 2010:10:11 13:02:19-04:00, 2010:10:11 13:03:05-04:00, 2010:10:18 10:26:21-04:00, 2010:10:18 10:26:22-04:00, 2010:11:02 16:42:02-04:00, 2010:11:02 16:42:03-04:00, 2010:11:03 11:53:15-04:00, 2010:11:03 11:53:15-04:00, 2010:11:03 13:18:24-04:00, 2010:11:03 13:24:13-04:00, 2010:11:03 13:26:27-04:00, 2010:11:03 13:31:19-04:00, 2010:12:07 11:15:42-05:00, 2010:12:07 11:19:56-05:00, 2010:12:07 11:24:05-05:00, 2010:12:07 11:39:53-05:00, 2010:12:07 11:39:53-05:00, 2010:12:07 11:41:29-05:00, 2010:12:07 15:37:57-05:00, 2010:12:07 16:52:27-05:00, 2010:12:08 11:11:15-05:00, 2010:12:08 11:16:05-05:00, 2010:12:09 14:03:25-05:00, 2010:12:09 14:05:39-05:00, 2011:03:22 07:37:12-04:00, 2011:03:22 07:37:12-04:00, 2011:03:22 08:45:33-04:00, 2011:03:22 08:49:33-04:00, 2011:03:22 09:10:17-04:00, 2011:03:22 14:10:27-04:00, 2011:03:22 15:36:31-04:00, 2011:03:24 16:43:27-04:00, 2011:04:06 08:09:31-04:00, 2011:04:07 12:43:08-04:00, 2011:04:07 13:31:22-04:00, 2011:04:07 13:47:22-04:00, 2011:04:11 14:38:52-04:00, 2011:04:11 15:37:06-04:00, 2011:04:12 07:34:18-04:00
History Software Agent          : Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0
History Changed                 : /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata
Derived From Instance ID        : xmp.iid:F77F1174072068118083DB278CE3D265
Derived From Document ID        : xmp.did:54FE3C740720681180839C326931BA0E
Derived From Original Document ID: xmp.did:F77F1174072068118A6DFB38BD2CE1EA
Derived From Rendition Class    : default
Doc Change Count                : 48896
Format                          : application/pdf
Producer                        : Adobe PDF Library 9.9
Trapped                         : False
Page Count                      : 24
Creator                         : Adobe InDesign CS5 (7.0.3)
EXIF Metadata provided by EXIF.tools
FCC ID Filing: WQ5CV2600N

Navigation menu