PEGATRON UPWL6028F Wireless Module User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1850523
Application ID	kxAiMpQ92STT90fHtpmYKA==
Document Description	user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	47.14kB (589259 bits)
Date Submitted	2012-12-03 00:00:00
Date Available	2013-01-05 00:00:00
Creation Date	2012-11-23 11:35:07
Producing Software	Acrobat Distiller 9.2.0 (Windows)
Document Lastmod	2012-11-23 11:35:07
Document Title	user manual
Document Creator	PScript5.dll Version 5.2.2

Manual
UNIHAN
UPWL6028F
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
i. Reorient or relocate the receiving antenna.
ii. Increase the separation between the equipment and receiver.
iii. Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
iv. Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
i. This device may not cause harmful interference, and
ii. this device must accept any interference received, including interference that may cause undesired
operation.
For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other
channels is not possible.
This device is restricted to indoor use when operated in the 5.15 to 5.25 GHz frequency range.
Safety statements
Regulatory Information/Disclaimers
Installation and use of this Bluetooth device must be in strict accordance with the instructions included in
the user documentation provided with the product. Any changes or modifications (including the antennas)
made to this device that are not expressly approved by the manufacturer may void the user’s authority to
operate the equipment. The manufacturer is not responsible for any radio or television interference caused
by unauthorized modification of this device, or the substitution of the connecting cables and equipment
other than manufacturer specified. It is the responsibility of the user to correct any interference caused by
such unauthorized modification, substitution or attachment. Manufacturer and its authorized resellers or
distributors will assume no liability for any damage or violation of government regulations arising from
failing to comply with these guidelines.
CAUTION! This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm between the
radiator & your body.
You are cautioned that changes or modifications not expressly approved by the party responsible for
compliance could void your authority to operate the equipment. Reprinted from the Code of Federal
Regulations #47, part 15.193, 1993. Washington DC: Office of the Federal Register, National Archives and
Records Administration, U.S. Government Printing Office.
CAUTION! Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate this equipment.
The final end product must be labeled in a visible area with the following " Contains TX FCC ID: UPWL6028F
".
IC
This device complies with Industry Canada licence‐exempt RSS standard(s). Operation is subject to
the following two conditions: (1) this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause undesired operation of the device.
IC Radiation Exposure Statement:
This equipment complies with IC RSS‐102 radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
This transmitter module is authorized only for use in device where the antenna may be installed
such that 20 cm may be maintained between the antenna and users. The final end product must
be labeled in a visible area with the following: “Contains transmitter module IC:
7582A‐UPWL6028F”.
This device and its antenna(s) must not be co‐located or operating in conjunction with any other
antenna or transmitter.
The device for the band 5150‐5250 MHz is only for indoor usage to reduce potential for harmful
interference to co‐channel mobile satellite systems.
This radio transmitter (identify the device by certification number, or model number if Category II)
has been approved by Industry Canada to operate with the antenna types listed below with the
maximum permissible gain and required antenna impedance for each antenna type indicated.
Antenna types not included in this list, having a gain greater than the maximum gain indicated for
that type, are strictly prohibited for use with this device.
 Systeem requirements
Before insttalling the PEGATRON
WIFI modu le, make sure that your system m eets the
following rrequiremen
nts:

IIntel® Pentiium® 4 or AMD
K7/K8 ssystem

Minimum 64MB
system
m memory

Windows® XP/VISTA
operating syystem

An availablee USB port (USB
2.0 reccommende
ed because USB 1.1 cannnot achieve
maximum wireless
perrformance)
 Instaalling the device
driivers
To install the device driver
in you
ur compute r:
Insert the ssupport CD to the optical drive annd follow th
he following
g proceduree.
Step1. Clicck
the “Nextt”
button.
SStep2. Brow
wse
the file path
and click the
““Next” buttton.
Step3. Clicck
tthe “Contin
nue
Anyway””
button.
Step4.
Installingg.
Step5. Clicck
the “Finish
h”
button.
Step6.
When you
successfullly
finish the
installation,
the computer
manageme
ent
will detect the
device.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : 
Create Date                     : 2012:11:23 11:35:07+08:00
Modify Date                     : 2012:11:23 11:35:07+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Creator Tool                    : PScript5.dll Version 5.2.2
Producer                        : Acrobat Distiller 9.2.0 (Windows)
Format                          : application/pdf
Creator                         : 
Title                           : 
Document ID                     : uuid:219f263a-1348-42d3-aad7-1b2389157c87
Instance ID                     : uuid:926bdf35-f455-4e94-ba15-5bc381182a70
Page Count                      : 8

EXIF Metadata provided by EXIF.tools