PEGATRON UPWL6031H2 Wireless module User Manual

PEGATRON CORPORATION Wireless module

User Manual

Manual
Unihan UPW L6 0 3 1 H2
1 .Ge nera l Description
The UPWL6031H2 w ireless m odule is a fully assem bled and test ed general- purpose
m odule using t he BCM4331wireless Syst em - on-Chip(SoC). The m odule cont ains
BCM4331 chip and all ot her necessary com ponent s t o operat e the UPWL6031H2.
For det ailed inform at ion on t he UPWL6031H2 com ponent it self, refer to t he
UPWL6031H2 dat asheet .
2 . Fe at ure s
Features Description
Network Standard IEEE 802.11 b/g/n (final n)
Chipset BCM4331
Input Voltage 3.3V
Data Rate 802.11b: 1, 2, 5.5, 11Mbps
802.11g: 6, 9, 12, 18, 24, 36, 48, 54Mbps
802.11n-20 MHz: MCS0~MCS23
802.11n-40 MHz: MCS0~MCS23(450Mbps)
Modulation
802.11b:DBPSK(1Mbps),DQPSK(2Mbps),CCK(5.5Mbps,11Mbps)
802.11g:BPSK(6Mbps,9Mbps),QPSK(12Mbps,18Mbps),
16QAM(24Mbps,36Mbps),64QAM(48Mbps,54Mbps)
802.11n:BPSK(MCS0,MCS8, MCS16),
QPSK(MCS1,MCS2,MCS9,MCS10, MCS17, MCS18),
16QAM(MCS3,MCS4,MCS11,MCS12, MCS19, MCS20),
64QAM(MCS5,MCS6,MCS7,MCS13,MCS14,MCS15, MCS21,
MCS22, MCS23)
Operating Frequency 802.11b/g/n (2412 ~ 2462 MHz)
Operating Channel 1~11 for North America,
Transceiver/Receiver
Mode 3T3R Mode
Chain Ant. Brand Part Number Antenna Type Connector Gain (dBi) Remark
1 1 WNC 81.EZY15.GBR PCB U.FL
3 TX/RX
2 2 WNC 81.EZY15.GBR PCB U.FL 3 TX/RX
3 3 WNC 81.EZY15.GBR PCB U.FL 3 TX/RX
3 . Be nefits
Sm all, self- cont ained SMT m odule.
3X3 MI MO function support
High power solut ion support high speed transm it t ance
For product available in the USA/Canada market, only channel 1~11 can be operated.
Selection of other channels is not possible.
Federa l Com m unicat ions Com m ission St ate m e nt
This device com plies wit h FCC Rules Part 15. Operat ion is subj ect t o t he following
i. This device m ay not cause harm ful interference, and
ii. This device m ust accept any interference received, including int erference t hat m ay cause
undesired operat ion.
This equipm ent has been t est ed and found t o com ply with t he lim it s for a class B digit al device,
pursuant to Part 15 of t he Federal Com m unicat ions Com m ission (FCC) rules. These lim it s are
designed t o provide reasonable prot ect ion against harm ful int erference in a residential installat ion.
This equipm ent generat es, uses, and can radiate radio frequency energy and, if not inst alled and
used in accordance with t he inst ruct ions, m ay cause harm ful interference t o radio com m unications.
How ever, t here is no guarant ee that int erference will not occur in a part icular installat ion. I f t his
equipm ent does cause harm ful interference t o radio or television reception, which can be
det erm ined by t urning the equipm ent off and on, t he user is encouraged t o try t o correct t he
int erference by one or m ore of t he following m easures:
i. Reorient or relocat e t he receiving antenna.
ii. I ncrease the separation bet ween t he equipm ent and receiver.
iii. Connect t he equipm ent into an outlet on a circuit different from that to which the receiver is
connect ed.
iv. Consult the dealer or an experienced radio/ TV t echnician for help.
CAUTI ON ! You are cautioned that changes or m odifications not expressly approved by the part y
responsible for com pliance could void your authorit y t o operat e t he equipm ent .
Reprinted from the Code of Federal Regulat ions # 47, part 15.193, 1993. Washington DC: Office of t he
Federal Register, Nat ional Archives and Records Adm inistration, U.S. Governm ent Printing Office.
IMPORTANT NOTE:
This module is intended for OEM integrator. The OEM integrator is still responsible for the FCC
compliance requirement of the end product, which integrates this module.
20cm minimum distance has to be able to be maintained between the antenna and the users for
the host this module is integrated into. Under such configuration, the FCC radiation exposure
limits set forth for an population/uncontrolled environment can be satisfied.
Any changes or modifications not expressly approved by the manufacturer could void the user's
authority to operate this equipment.
USERS MANUAL OF THE END PRODUCT:
In the users manual of the end product, the end user has to be informed to keep at least 20cm
separation with the antenna while this end product is installed and operated. The end user has to
be informed that the FCC radio-frequency exposure guidelines for an uncontrolled environment
can be satisfied. The end user has to also be informed that any changes or modifications not
expressly approved by the manufacturer could void the user's authority to operate this equipment.
If the size of the end product is smaller than 8x10cm, then additional FCC part 15.19 statement is
required to be available in the users manual: This device complies with Part 15 of FCC rules.
Operation is subject to the following two conditions: (1) this device may not cause harmful
interference and (2) this device must accept any interference received, including interference that
may cause undesired operation.
LABEL OF THE END PRODUCT:
The final end product must be labeled in a visible area with the following " Contains TX FCC ID:
VUIUPWL6031H2 ". If the size of the end product is larger than 8x10cm, then the following FCC
part 15.19 statement has to also be available on the label: This device complies with Part 15 of
FCC rules. Operation is subject to the following two conditions: (1) this device may not cause
harmful interference and (2) this device must accept any interference received, including
interference that may cause undesired operation.
About t his guide
This user guide contains the inform at ion your PEGATRON WI FI Module.
Syst em requirem ents
Before inst alling the PEGATRON WI FI m odule, m ake sure that your syst em m eet s the
following requirem ent s:
I nt el® Pent ium ® 4 or AMD K7/ K8 syst em
Minim um 64MB syst em m em ory
Windows® XP/ VI STA operat ing system
I nst alling t he de vice driver s
To inst all the device driver in your com put er:
I nsert t he support CD t o the opt ical drive and follow the following procedure.
St ep 1
St ep 2
St ep 3
St ep 4
St ep 5

Navigation menu