PEGATRON UPWL6031SP Wireless module User Manual UPWL6031SP manual 20150728 ok

Download:
Mirror Download [FCC.gov]
Document ID	2710732
Application ID	p2OlNKU8k/HuZ/kgo51+QQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	10.9kB (136240 bits)
Date Submitted	2015-08-11 00:00:00
Date Available	2015-08-12 00:00:00
Creation Date	2017-11-13 00:00:45
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-11-13 00:00:45
Document Title	Microsoft Word - UPWL6031SP_manual_20150728-ok.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	ChristyFan

Manual
PEGATRON UPW L6 0 3 1 SP
1 .Ge n e r a l D e scr ipt ion
The UPWL6031SP wireless m odule is a fully assem bled and t est ed general- purpose
m odule using t he BCM4331 wireless Syst em - on- Chip( SoC) . The m odule cont ains
BCM4331 chip and all ot her necessary com ponent s t o operat e t he UPWL6031SP.
For det ailed inform at ion on t he UPWL6031SP com ponent it self, refer t o t he
UPWL6031SP dat asheet .
2 . Fe a t u r e s
Features
Description
Network Standard
IEEE 802.11 b/g/n (final n)
Chipset
BCM4331(100pin)
Input Voltage
3.3V
Data Rate
802.11b: 1, 2, 5.5, 11Mbps
802.11g; 6, 9, 12, 18, 24, 36, 48, 54Mbps
802.11n-20 MHz: MCS0~MCS23
802.11n-40 MHz: MCS0~MCS23(450Mbps)
802.11b:CCK
802.11g: BPSK,QPSK.16QAM,64QAM
802.11n: BPSK(MCS0, MCS8, MCS16)
Modulation
QPSK(MCS1, MCS2, MCS9, MCS10,MCS17,MCS18 )
16QAM(MCS3, MCS4,MCS11, MCS19,MCS20)
64QAM(MCS5,MCS6,MCS7,MCS13,MCS14,MCS15,
MCS23, MCS22, MCS23)
Operating Frequency
802.11b/g/n/ (2.412~2.462GHz)
Operating Channel
CH1~CH11 for North America,
Transceiver/Receiver
Mode
3T3R Mode
Ant.
Brand
Part No.
Antenna Type
Connector
Gain (dBi)
Hong Lin
290-30209
PCB
I-PEX
2.87
Hong Lin
290-30250
PCB
I-PEX
2.94
Hong Lin
290-30350
PCB
I-PEX
2.75
INPAQ
DAM-L8-B-M1-100-02-00
PCB
I-PEX
2.94
3 . Be n e fit s
Sm all, self- cont ained SMT m odule.
3X3 MI MO funct ion support
Com ply wit h 802.11n crit eria
For product available in the USA/Canada market, only CH1~CH11 can be operated.
Selection of other channels is not possible.
Fe de r a l Com m u n ica t ion s Com m ission St a t e m e n t
This device com plies wit h Part 15 of t he FCC Rules. Operat ion is subj ect t o t he following t wo
condit ions: ( 1) This device m ay not cause harm ful int erference, and ( 2) t his device m ust accept any
int erference received, including int erference t hat m ay cause undesired operat ion.
This equipm ent has been t est ed and found t o com ply wit h t he lim it s for a class B digit al device,
pursuant t o Part 15 of t he FCC Rules. These lim it s are designed t o provide reasonable prot ect ion
against harm ful int erference in a resident ial inst allat ion. This equipm ent generat es, uses, and can
radiat e radio frequency energy and, if not inst alled and used in accordance wit h t he inst ruct ions,
m ay cause harm ful int erference t o radio com m unicat ions. However, t here is no guarant ee t hat
int erference will not occur in a part icular inst allat ion. I f t his equipm ent does cause harm ful
int erference t o radio or t elevision recept ion, which can be det erm ined by t urning t he equipm ent off
and on, t he user is encouraged t o t ry t o correct t he int erference by one or m ore of t he following
m easures:
i. Reorient or relocat e t he receiving ant enna.
ii. I ncrease t he separat ion bet ween t he equipm ent and receiver.
iii. Connect t he equipm ent int o an out let on a circuit different from t hat t o which t he receiver is
connect ed.
iv. Consult t he dealer or an experienced radio/ TV t echnician for help.
IMPORTANT NOTE:
This module is intended for OEM integrator. The OEM integrator is responsible for the
compliance to all the rules that apply to the product into which this certified RF module is
integrated.
Additional testing and certification may be necessary when multiple modules are used.
20cm minimum distance has to be able to be maintained between the antenna and the users for
the host this module is integrated into. Under such configuration, the FCC radiation exposure
limits set forth for an population/uncontrolled environment can be satisfied.
Any changes or modifications not expressly approved by the manufacturer could void the user's
authority to operate this equipment.
USERS MANUAL OF THE END PRODUCT:
In the users manual of the end product, the end user has to be informed to keep at least 20cm
separation with the antenna while this end product is installed and operated. The end user has to
be informed that the FCC radio-frequency exposure guidelines for an uncontrolled environment
can be satisfied. The end user has to also be informed that any changes or modifications not
expressly approved by the manufacturer could void the user's authority to operate this equipment.
If the size of the end product is smaller than 8x10cm, then additional FCC part 15.19 statement is
required to be available in the users manual: This device complies with Part 15 of FCC rules.
Operation is subject to the following two conditions: (1) this device may not cause harmful
interference and (2) this device must accept any interference received, including interference that
may cause undesired operation.
LABEL OF THE END PRODUCT:
The final end product must be labeled in a visible area with the following " Contains TX FCC ID:
VUIUPWL6031SP ". If the size of the end product is larger than 8x10cm, then the following FCC
part 15.19 statement has to also be available on the label: This device complies with Part 15 of
FCC rules. Operation is subject to the following two conditions: (1) this device may not cause
harmful interference and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Sa fe t y st a t e m e n t s
Re gu la t or y I n for m a t ion / D iscla im e r s
I nst allat ion and use of t his Bluet oot h device m ust be in st rict accordance wit h t he inst ruct ions included
in t he user docum ent at ion provided wit h t he product . Any changes or m odificat ions ( including t he
ant ennas) m ade t o t his device t hat are not expressly approved by t he m anufact urer m ay void t he user’s
aut horit y t o operat e t he equipm ent . The m anufact urer is not responsible for any radio or t elevision
int erference caused by unaut horized m odificat ion of t his device, or t he subst it ut ion of t he connect ing
cables and equipm ent ot her t han m anufact urer specified. I t is t he responsibilit y of t he user t o correct
any int erference caused by such unaut horized m odificat ion, subst it ut ion or at t achm ent . Manufact urer
and it s aut horized resellers or dist ribut ors will assum e no liabilit y for any dam age or violat ion of
governm ent regulat ions arising from failing t o com ply wit h t hese guidelines.
CAUTI ON ! To m aint ain com pliance wit h FCC’s RF exposure guidelines, t his equipm ent should be
inst alled and operat ed wit h m inim um dist ance [ 20cm ] bet ween t he radiat or and your body. Use on t he
supplied ant enna. Unaut horized ant enna, m odificat ion, or at t achm ent s could dam age t he t ransm it t er
and m ay violat e FCC regulat ions.
Sa fe t y I n for m a t ion
I n order t o m aint ain com pliance wit h t he FCC RF exposure guidelines, t his equipm ent should
be inst alled and operat ed wit h m inim um dist ance [ 2 0 cm ] bet ween t he radiat or and your
body. Use only wit h supplied ant enna.
Unaut horized ant enna, m odificat ion, or at t achm ent s could dam age t he t ransm it t er and m ay
violat e FCC regulat ions.
CAUTI ON ! Any changes or m odificat ions not expressly approved in t his m anual could void
your aut horizat ion t o use t his device.
M PE St a t e m e n t
Your device cont ains a low power t ransm it t er. When device is t ransm it t ed it sends out Radio
Frequency ( RF) signal.
FCC Ra dio Fr e qu e n cy Ex posu r e
This Bluet oot h device has been evaluat ed under FCC Bullet in OET 65C and found com pliant t o
t he requirem ent s as set fort h in CFR 47 Sect ions 2.1091, 2.1093, and 15.247( b) ( 4)
addressing RF Exposure from radio frequency devices. The radiat ion out put power of t his
Bluet oot h device is far below t he FCC radio frequency exposure lim it s. Nevert heless, t his
device shall be used in such a m anner t hat t he pot ent ial for hum an cont act during norm al
operat ion – as a m obile or port able device but use in a body- worn way is st rict ly prohibit .
When using t his device, a cert ain separat ion dist ance bet ween ant enna and nearby persons
has t o be kept t o ensure RF exposure com pliance. I n order t o com ply wit h t he RF exposure
lim it s est ablished in t he ANSI C95.1 st andards, t he dist ance bet ween t he ant ennas and t he
user should not be less t han [ 20cm ] .
RF Ex posu r e
This device and it s ant enna( s) m ust not be co- locat ed wit h any ot her t ransm it t ers except in
accordance wit h FCC m ult i- t ransm it t er product procedures.
Refering t o t he m ult i- t ransm it t er policy, m ult iple- t ransm it t er( s) and m odule( s) can be
operat ed sim ult aneously wit hout C2P.
Fr e qu e n cy St a t e m e n t
This device is going t o be operat ed in 2.412~2.462GHz frequency range, it is rest rict ed in
indoor environm ent only.
Abou t t h is gu ide
This user guide cont ains t he inform at ion for your PEGATRON WI FI Module.
Syst e m r e qu ir e m e n t s
Before inst alling t he PEGATRON WI FI m odule, m ake sure t hat your syst em m eet s t he
following requirem ent s:
I nt el® Pent ium ® 4 or AMD K7/ K8 syst em
Minim um 64MB syst em m em ory
Windows® XP/ VI STA operat ing syst em
I n st a llin g t h e de vice dr ive r s
To inst all t he device driver in your com put er:
I nsert t he support CD t o t he opt ical drive and follow t he following procedure.
St ep 1
St ep 2
St ep 3
St ep 4
St ep 5


---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Author                          : ChristyFan
Create Date                     : 2015:07:31 15:11:18+08:00
Modify Date                     : 2015:08:11 15:47:36+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2015:08:11 15:47:36+08:00
Format                          : application/pdf
Title                           : Microsoft Word - UPWL6031SP_manual_20150728-ok.doc
Creator                         : ChristyFan
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Document ID                     : uuid:5a7be812-d4b2-420e-8029-0c1d13155934
Instance ID                     : uuid:6db5bed1-5665-47fe-a7f9-70dc820ffff0
Page Count                      : 12

EXIF Metadata provided by EXIF.tools