PEGATRON XY1041 Remote Control User Manual 65inch Glasses Free 3D Monitor UM

PEGATRON CORPORATION Remote Control 65inch Glasses Free 3D Monitor UM

User Manual

65” Glasses-Free 3D DisplayUser ManualVersion: 1.0
ii Table of Contents1. Safety Precaution1.1. Power ...................................................11.2. Cleaning .................................................11.3. Vent Holes ................................................21.4. Temperature & Fire .........................................21.5. Lightning .................................................21.6. Installation and Important Information ...........................2Installation of a Pedestal Stand (Optional)................................................2Installation of a Wall Mounting Bracket .....................................................42. Overview2.1. Packing Checklist ..........................................52.2. Display Overview...........................................62.3. Remote Control Overview ....................................73. Setup3.1. Setting up the Remote Control ................................9Changing the Battery ................................................................................9Install Remote Control USB Receiver .....................................................11Pairing the Remote Control ..................................................................... 113.2. Connecting the Display .....................................12Connecting to HDMI Device ....................................................................12Connecting A USB Device ......................................................................13Connecting the Audio Device ..................................................................15Connecting to Ethernet ...........................................................................153.3. Powering on the Display ....................................164. On-Screen Display Menu4.1. Main Menu...............................................174.2. Input Menu ..............................................184.3. Conversion Menu .........................................19Mode Menu .............................................................................................204.4. Picture Menu .............................................21Borders Menu .........................................................................................22
iii 4.5. Preferences Menu .........................................23Network Mode Menu ...............................................................................24Upgrade Software ...................................................................................264.6. Device Status Menu .......................................294.7. Info Menu ...............................................305. Troubleshooting6. FAQ   ............................................357.2. Preset Modes ............................................367.3. HDMI Timing .............................................367.4. Video Input Limitations .....................................36
iv CopyrightThis publication, including all photographs, illustrations and software, is protected under international copyright laws, with all rights reserved. Neither this manual, nor any of the material contained herein, may be reproduced without the express written consent of the manufacturer.DisclaimerThe information in this document is subject to change without notice. Furthermore, the manufacture reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation to notify any person of such revision or changes.Compliance InformationFederal Communication Commission Interference StatementThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.U.S. Responsible Party: ________________________________________________Address: ____________________________________________________________Tel. No.: _____________________________________________________________Type of Product:Model:
v Canadian Department of Communications Compliance StatementDOC: This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety Regulations according to CAN/CSA C22.2 No.60065-03.FCC Information:monitor so as not to interfere with radio and television reception.(1) Please use the supplied power cord or equivalent to ensure FCC compliance.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio / TV technician for help.FCC CAUTIONTo assure continued compliance and avoid possible undesirable interference, ferrite cores may be used when connecting this display to video equipment. Maintain at least 400mm spacing to other peripheral devices.
vi FCC warningresponsible for compliance with the FCC Rules could void the user’s authority to operate this equipment.CablesConnections to this device must be made with shielded cables with metallic RF / EMI connector hoods to maintain compliance with FCC Rules and Regulations.Canadian noticeCAN ICES-3 (B) / NMB-3(B)Standard Television Receiving Apparatus-Appareil de réception télévision ordinaire, Canada, BETS-7/NTMR-7If necessary, the user should contact the dealer or an experienced radio/television technician for additional suggestions. The user may Commission, helpful: “How to Identify and Resolve Radio-display Interference Problems.” This booklet is available from the U.S. 000-00345-4.Do not throw the battery in municipal waste. The symbol of the crossed out wheeled bin indicates that the battery should not be placed in municipal waste.Limited WarrantyseeCube Glasses-Free 3D makes the following limited warranties during the warranty period: (a) the Product will function properly under normal use; (b) the Product will be free from defects in materials or workmanship.About this ManualThis document provides information related to functionality of this seeCube Glasses-Free 3D device. Although it provides basic information related to equipment connections, this document is not 
1Safety Precaution1. Safety PrecautionPlease read the following recommended safety precautions carefully for your safety.1.1. PowerTo disconnect your seeCube Glasses-Free 3D from the power source, cable from the power source.1.2. CleaningDisconnect your seeCube Glasses-Free 3D from the power source before cleaning.Do not clean your seeCube Glasses-Free 3D while it is switched on. Use a soft and damp cloth to clean the surface of product. Do not use chemical cleaners to clean the screen. Do not apply cleanser directly on your display.Do not use the following cleaning products: Alkaline lye (e.g. pure soap, certain textile detergents), Lye (e.g. toilet cleaner), Acids (e.g. hydrochloric acid, vinegar, lemon),  Degreasing Agents (e.g. acetone, methylene chloride), Ammonia, chlorine or hypochlorite detergents (e.g. toilet cleaner), Solvents (e.g. Ethyl alcohol, Isopropyl alcohol, alcohol, acetone, trichloroethylene, benzene, hexane, petrol).Do not use coarse millinery such as abrasives, steel wool, sponge with abrasives, cloth with thread made of steel, hard cloth or paper tissue.
2Safety Precaution1.3. Vent HolesVent holes on the cabinet of your seeCube Glasses-Free 3D product ensure optimum performance of your display without overheating. Do not block the openings in any way.1.4. Temperature & Firesources.1.5. LightningDisconnect your product’s power cord during an electrical storm to prevent a potential electrical shock from lightning.1.6. Installation and Important InformationInstallation of a Pedestal Stand (Optional)Warning:To prevent damage to the monitor or personal injury, read all safety information as provided by the pedestal stand manufacturer before beginning any installation procedures.Warning:To prevent damage to the monitor or personal injury, make sure the pedestal stand meets all requirements for the size and weight of the monitor prior to installation.Warning:The installation procedure requires no less than four individuals to move the monitor. To prevent damage to the monitor or personal injury, do not attempt to move the monitor with fewer individuals than the recommended number.1. Unplug and remove all cabling from the bottom of the display.2. Clear a work surface and prepare it to allow space for the monitor.3. Place a soft cover over the work surface to prevent scrateches or other damage to the monitor display.
3Safety Precaution4. Carefully place the monitor (front side facing down) over the work surface and slowly lay it on the work surface. Make sure the monitor is secure before releasing the monitor.5. Remove the 4 plastic caps that cover the screw holes (left side x 2, right side x 2) for attaching the stand.6. Align the holes on the stand with the holes on the rear side of the seeCube Glasses-Free 3D.7. Secure the stand with the provided screws.The following screw type is recommended for use in a pedestal stand installation: M6 x 9mm.NOTE:It is not recommended to insert the screws into the screw holes 
4Safety PrecautionInstallation of a Wall Mounting BracketPlease use a wall bracket appropriate for the size and weight of the display. The seeCube Glasses-Free 3D is compatible with a standard VESA mount. Four people are required for installation1. Unplug and remove all cabling from the bottom of the display.2. Clear a work surface and prepare it to allow space for the monitor.3. Place a soft cover over the work surface to prevent scrateches or other damage to the monitor display.4. Follow the instructions provided with your wall bracket. Before mounting, make sure the appropriate brackets are attached to the wall and the back of the display as described in the instructions provided with the wall bracket.5. Always use the provided screws (M8 x 14mm) by the wall mount manufacturer.
5Overview2. Overview2.1. Packing ChecklistseeCube Glasses-Free 3DPower Cord Remote Control(XY1041) Remote Control USB Receiver(XY1041)
6Overview2.2. Display Overview12334 56No Item Description1 Audio jack Connect to an external speaker.2USB ports Connect to remote control USB receiver or USB device (for playback of Ultra-D formatted content).3 HDMI ports Connect to the HDMI device.4 LAN port Connect to the RJ45 cable for internet software update.5 Power socket Connect a power cord.6 Power switch Turn on or off the display.
7Overview2.3. Remote Control Overview123456879101112131514No Item Description1 Home Press to display or hide the OSD.2Up Navigates and changes settings in the OSD.3 Left Navigates and changes settings in the OSD.4 Down Navigates and changes settings in the OSD.5 Back Press to return to the previous level or exit the OSD menu.6 Previous mode.7 OK 8 Volume + Increase the volume.9 Right Navigates and changes settings in the OSD.10 Volume - Decrease the volume.
8OverviewNo Item Description11 Conversion Press to display the CONVERSION menu (OSD).12 3D Depth Press 3D Depthfactor.13 Next 14 Play/Pause (Currently no support this function)15 Release button Press to release the battery cover.
9Setup3. Setup3.1. Setting up the Remote ControlThe remote control comes with one 3V lithium battery (CR2025). The battery is pre-installed in the remote control.To begin using the remote control, remove the plastic tab from the battery compartment.Changing the Battery1. Press and lift up the battery cover.12
10Setup2. Remove the old battery.123. Insert the new battery with the positive terminal facing up.4. Angle the battery cover into the remote and insert it.5. Flip down to close the battery cover.21CAUTION: Use only a 3V lithium battery (CR2025). Dispose of used batteries according to local ordinance regulations. Remove the battery when not using the display for prolonged periods.
11SetupInstall Remote Control USB ReceiverPairing the Remote Control1. Connect the USB receiver to the seeCube Glasses-Free 3D.2. Press Right and Back buttons on the remote control 3 minutes.One the USB receiver and remote control are paired to the display, 
12Setup3.2. Connecting the DisplayConnecting to HDMI DeviceReal-Time ConversionReal-Time conversion mode converts 2D or 3D stereoscopic video from the HDMI input into the Ultra-D format for display on the monitor. This process adds depth to the video, allowing the Ultra-D display to produce a 3D viewing experience without requiring the viewer to wear 3D glasses.A variety of video formats are supported. See “Video Input Limitations” on page 36 for information.3D stereoscopic sources can be viewed in either half resolution (side-by-side or top-and-bottom) or full resolution formats. The latter format is standard for 3D Blu-ray discs played back on a 3D Blu-ray player. Full-resolution or “frame packed” playback is auto-detected by the display, but half-resolution formats require a manual selection which can be found in the CONVERSION > MODE menu.If no video signal is present, “NO HDMI INPUT” displays on the Ultra-D display.Real-Time conversion mode is the default mode of operation unless there is a USB storage device plugged in with pre-converted Ultra-D content which will cause the system to enter Load & Play mode.
13SetupConnecting A USB DeviceLoad & PlayLoad & Play is a feature that lets you play back pre-converted content in a black screen. To use this feature you must have a USB storage must be saved in the root directory of the USB storage device to be recognized.To use Load & Play:1. Boot the system up in Real Time Conversion mode. 2. Insert the USB storage device into a USB port.Playback of the content is automatic.To stop playback during Load & Play mode: 1. Press the BACK button twice or remove the USB device.OrPress HOME menu.2. CONVERSION.
14Setup3. Press OKSTOP ULTRA-D PLAYBACK.4. Press OK to return to Real Time Conversion mode.If the system does not recognize any of pre-converted Ultra-D content, Conversion mode.function cycles from the beginning. It will continue to loop through all exit Load & Play mode.NOTE:Only one USB storage device may be connected at a time. Multiple devices are not supported and may result in a system error. To correct this issue, remove all USB devices from the display and only re-plug a single USB device.Certain USB device brands may not exhibit expected results--unplugging them does not exit Load & Play mode. A message “Unfortunately, seeCube has stopped” may display. When a USB device is not functioning, discontinue use of that USB device and replace it.
15SetupConnecting the Audio DeviceAn external speaker may be connected via the 3.5mm stereo jack.Connecting to Ethernetnot intended for accessing streaming content or other data.
16Setup3.3. Powering on the Display1. Connect the power cord to the display and the other end to a wall outlet.2. Turn on the power switch.
17On-Screen Display Menu4. On-Screen Display MenuThis section introduces the On-screen Display (OSD) menus and functions.4.1. Main MenuThe main menu is available by pressing the HOME button on the MAIN MENUINPUTCONVERSIONPICTUREPREFERENCESDEVICE STATUSINFOLabel DescriptionINPUT Press OK to enter the INPUT menu and select an input source. See “Input Menu” on page 18.CONVERSIONPress OK to enter the CONVERSION menu to select the desired 2D or 3D conversion mode. See “Conversion Menu” on page 19.PICTURE Press OK to enter the PICTURE menu and adjust image settings. See “Picture Menu” on page 21.PREFERENCESPress OK to enter the PREFERENCES menu to adjust factory, network, and upgrade settings. See “Preferences Menu” on page 23.
18On-Screen Display MenuLabel DescriptionDEVICE STATUSPress OK to enter the DEVICE STATUS menu to view display information. See “Device Status Menu” on page 29.INFO Press OK to enter the INFO menu to display brand information. See “Info Menu” on page 30.4.2. Input MenuThe INPUT menu allows you to select the input source for display on the monitor.To select the type of source input:1. Press HOME on the remote control.2. INPUT.3. Press OK to enter the source option.HDMI 1 : ActiveHDMI 2ULTRA−D PLAYBACKBYPASSLabel DescriptionHDMI 1 Select HDMI 1 as the active input source.HDMI 2 Select HDMI 2 as the active input source.
19On-Screen Display MenuLabel DescriptionULTRA-D PLAYBACK / STOP ULTRA-D PLAYBACKStart or stop Load & Play of content from a USB storage device.BYPASSStop Real Time Conversion and bypass the conversion process so the currently selected video input is displayed unprocessed. Menu interface is disabled while in BYPASS mode. To return to the Real Time Conversion mode, press BACK on the remote control.4.3. Conversion MenuThe CONVERSION menu allows you to select the desired 2D or 3D conversion mode.To select the type of conversion mode:1. Press HOME on the remote control.2. CONVERSION.3. Press OK to select the method.MODELIVELINESSLabel DescriptionMODE Press OK to enter the MODE rendering menu. See “Mode Menu” on page 20.LIVELINESSAdjust the brightness/vividness of the image. The function is only available if MODE is set to 2D TO ULTRA-D.
20On-Screen Display MenuMode MenuThe MODE menu allows you to select the 2D or 3D input source. It also allows you to watch 2D as 2D without applying any conversion to Ultra-D.To select the type of mode:1. Press HOME on the remote control.2. MODE.3. Press OK to select the method.2D TO ULTRA−DSIDE−BY−SIDE TO ULTRA−DTOP−BOTTOM TO ULTRA−D2D AS 2DLabel Description2D TO ULTRA-D Convert 2D video to Ultra-D.SIDE-BY-SIDE TO ULTRA-DConvert side-by-side (SBS) formatted 3D stereoscopic video to Ultra-D format. Only select this option when the source video is in the side-by-side 3D format.TOP-BOTTOM TO ULTRA-DConvert top-and-bottom (TB) formatted 3D stereoscopic video to Ultra-D format. Only select this option when the video source is in the top-and-bottom format.2D AS 2D View 2D video without converting to Ultra-D.
21On-Screen Display Menu4.4. Picture MenuThe PICTURE menu allows you to adjust the depth factor, depth offset, brightness, and contrast properties of the video source.To select the type of property:1. Press HOME on the remote control.2. PICTURE.3. Press OK to select the method.DEPTH FACTORDEPTH OFFSETBORDERSBRIGHTNESSCONTRASTLabel DescriptionDEPTH FACTORPress OKdepth factor (total amount of depth). The default value is 100.DEPTH OFFSETPress OKdepth offset. This does not change to amount of 3D, but allows you to pull the scene forward or push the scene back into the screen (increase to move objects away from you). The default value is 0%.BORDERS Press OK to enter the BORDERS menu. See “Borders Menu” on page 22.BRIGHTNESS Press OKbrightness of the image. The default value is 100.CONTRAST Press OKcontrast of the image. The default value is 100.
22On-Screen Display MenuBorders MenuThe BORDERS menu allows you to setup the 3D depth settings.To navigate to the BORDERS menu:1. Press HOME on the remote control.2. From the MAIN menu, select PICTURE and press OK.3. BORDERS and press OK.4. BORDER FACTOR TOP BORDERBOTTOM BORDERLEFT BORDERRIGHT BORDERLabel DescriptionBORDER FACTOR Press OK to reset the 3D depth to the factory preset values.TOP BORDERPress OK3D depth for the top of the image. The default value is 0.BOTTOM BORDERPress OK3D depth for the bottom of the image. The default value is 0.LEFT BORDERPress OK3D depth for the left of the image. The default value is 0.RIGHT BORDERPress OK3D depth for the right of the image. The default value is 0.
23On-Screen Display Menu4.5. Preferences MenuThe PREFERENCES menu allows you to select certain utility functions.To select a setting menu:1. Press HOME on the remote control.2. PREFERENCES.3. Press OK to select the method.FACTORY RESETNETWORK MODE : DHCPUPGRADELabel DescriptionFACTORY RESET Press OK to reset all functions to factory preset values.NETWORK MODE Press OK to enter the NETWORK MODE menu. See “Network Mode Menu” on page 24.UPGRADEPress OK to enter the UPGRADE menu to download the latest software version. See “Upgrade Software” on page 26.
24On-Screen Display MenuNetwork Mode MenuThe NETWORK MODE menu allows you to setup the network settings. To select the network setting type:1. Press HOME on the remote control.2. From the MAIN menu, select PREFERENCES and press OK.3. NETWORK MODE and press OK.4. DHCPMANUALLabel DescriptionDHCP Press OK to use the DHCP settings. Your network environment must be DHCP enabled.MANUAL Press OKSee .
25On-Screen Display Menunetwork settings.1. DNS settings.2. Press OK to enter a setting.NETWORK CONFIGURATIONIP ADDRESS 192 . 168 . 1 . 158255 . 255 . 255 . 0192 . 168 . 1 . 1192 . 168 . 1 . 1SUBNET MASKGATEWAYDNSSAVE CANCEL3. 4. Press OK to enter.NETWORK CONFIGURATIONIP ADDRESS 192 . 168 . 1 . 0 0 . 0 . 0 . 0 0 . 0 . 0 . 0 0 . 0 . 0 . 0SUBNET MASKGATEWAYDNSSAVE CANCEL12345678905. Select SAVECANCEL to abort it.
26On-Screen Display MenuUpgrade SoftwareThe following section demonstrates how to perform the software upgrade procedure.CAUTION:Do not disconnect or power down the display at any time during the upgrade process to prevent damage or corruption to the The Upgrade Software procedure requires a network connection with Internet access. 1. Press HOME on the remote control.2. From the MAIN menu, select PREFERENCES and press OK.3. UPGRADE and press OK.The Upgrade function establishes a connection and retrieves any updates available for the display.Checking for UpgradePlease wait ...
27On-Screen Display MenuIf there are no updates available, a System is up-to-date screen displays.System is up−to−dateWhen a new upgrade version is available, you are asked to initiate the download.4. Press OK to start the download process.Upgrade version mim8974−eng.git.20151021.130652 isavailable on serverPress OK to start downloading
28On-Screen Display MenuOnce the download is complete, you will need to reboot the display to initiate the installation process.5. Press OK to reboot and install the new upgrade version.Downloaded version mim8974−eng.git.20151021.190452...Press OK reboot and install
29On-Screen Display Menu4.6. Device Status MenuThe DEVICE STATUS menu lists information regarding the display’s hardware and software state. It is only for display. The information is 1. Press HOME on the remote control.2. DEVICE STATUS.3. Press OK to display the DEVICE STATUS menu. BSP Version:Build Version:Model Number:Serial Number:Firmware Version:Software Version:NETWORK STATUS:UPGRADE STATUS:HDMI Input Status:HDMI Input Port 1:HDMI Input Port 2:1.2.19msm8974eng.git.20150827.113616msm8974222020206251500085V2.0 build 3 type 120.9.0.1392 build 1DisconnectedNo network connection to get softwareinformation on server1920x1080p@60Hz(1080p60)Connected / ActiveConnectedLabel DescriptionBSP Version Display the current version of the software.Build Version Display the internal build version of the software.Model Number Display the internal model of the software.Serial Number Display the hardware (conversion board) serial number.Firmware Version Display the version information of the render boardSoftware Version Display the version information of the Ultra-D libraryNETWORK STATUS Display the network status informationUPGRADE STATUS Display the software upgrade information (if a newer version is on the server)
30On-Screen Display MenuLabel DescriptionHDMI Input StatusDisplay the current input signal resolution from the active HDMI input. The information displays available resolution, Unknown for unrecognized resolution formats, and No HDMI Input if an HDMI signal is not detected.HDMI Input Port 1Displays the current signal status of HDMI port 1: Connected if an HDMI source is detected. Disconnected if an HDMI source is not detected. Active if port 1 is the currently selected input source.HDMI Input Port 2Displays the current signal status of HDMI port 2: Connected if an HDMI source is detected. Disconnected if an HDMI source is not detected. Active if port 2 is the currently selected input source.4.7. Info MenuThe Info menu displays proprietary information. 1. Press HOME on the remote control.2. INFO.3. Press OK to display the INFO menu.© 2012-2016 SeeCubic B.V. The Netherlands
31Troubleshooting5. TroubleshootingThis section lists known issues with the software release. Future software releases may resolve these issues.Question: Flashes and corrupted image during mode switch.Answer: During a mode switch the system restarts the video capture stack, but the trigger for this process relies on invalid images being sent through the system which means the image the new HDMI signal. This is normal and does not indicate a malfunction. Once the system starts processing video at the Question: Volume crackles if set too high.Answer: If the volume is adjusted above its default setting, then the output of the DAC can be too high for the input of the speakers, resulting in clipping being heard. Do not adjust volume higher than the default setting of 75% unless the input volume is very, very low.Question: Audio crackles.Answer: The only currently supported input sample rate for audio is 48kHz. Attempting to play back 44.1kHz or other sample rates will result in the audio crackling. Please verify that the source is sending 48kHz audio.Question: No video is shown on the screen.Answer: This is a known issue. Either unplug and re-plug the HDMI input cable (HDMI In 1) and try again, or power down (turn off) the monitor, wait 5 seconds, then power up (turn on) the monitor.
32TroubleshootingQuestion: Video plays black, then blinks.Answer: This is a known issue. Either unplug and plug the HDMI input cable (HDMI In 1) and try again, or power down (turn off) the monitor, wait 5 seconds, then power up (turn on) the monitor.Question: Video mode switch is slow.Answer: This is a known issue which will be resolved in a future software update. Mode switches can take anywhere from 20 seconds to over a minute.Question: Board boots up to black screen.Answer: This is a known issue. Either unplug and re-plug the HDMI input cable and try again, or power down (turn off) the monitor, wait 5 seconds, then power up (turn on) the monitor.Question: HDMI input status is incorrect.Answer: This is a known issue that will be resolved in a future software update.Question: Board drops frames / crashes / is unstable.Answer: The conversion board generates a fair amount of heat and it is possible to overheat the board, especially in hot or normal operation. It is preferable to operate the display in air-conditioned environments that do not exceed 33 degrees celcius/91 degrees Fahrenheit.Question: Hiccups during Ultra-D Load and Play.Answer: During Ultra-D Load and Play, you may encounter audio and visual hiccups (stutters, crackling, distortion, etc). Make sure the USB storage device remains in the USB port, then power down (turn off) the monitor, wait 5 seconds, then power up (turn on) the monitor and playback should return to normal. This issue usually occurs if you plug in a USB storage device while the conversion board is already running.
33Troubleshootingblack lines.Answer: This shows up as fringing around objects and is especially visible in dark areas of the video. Power down (turn off) the monitor, wait 5 seconds, then power up (turn on) the monitor to resolve this.
34FAQ6. FAQThis section contains frequently asked questions and answers.Question: I’m trying Load & Play but every time I play a pre-but may also be “.ultrad”) are not supported and result in a black screen being shown if they are attempted to be played. Other than a black screen, there is no feedback that this is happening.Answer: To exit bypass mode, press the Back button on the remote. Answer: If display shows only one image and no amount of rebooting not see the startup animation when you reboot), then it’s likely the monitor has “hung”. Turn the monitor off and turn it back on again to reboot the system.
357. 7.1. Display 10-bit, 16.7 million colorsVisible Screen Size 3840 x 2160@60Hz 4:4:4Power Supply 100-240 V, 50/60 HzPower Consumption 6ASupported Video Resolutions 640 x 480p/60 480p/60 (4:3/16:9) 720p/60 1080p/24 1080p/30 1080p/60 480i 576i 1080i/50 1080i/60 720p/60 3D FP 1080p/30 3D FP 2160 x 1080p/30 (2D as 2D only)Connectors HDMI x 2 USB x 2 3.5mm audio input jackAspect Ratio 16:9Brightness Up to 450 cd/m2Contrast Ratio 4000:1Viewing Angle 178° horizontal, 178° verticalWeight 71.14 kg (156.84 lbs)Dimensions (W x H x D) 147 x 85 x 9.5 cm (57.87 x 33.46 x 3.74 inch.)Operating Temperature 5°C - 35°C (41°F - 94°F)Operating Humidity 20% - 80% (non-condensing)
367.2. Preset Modes7.3. HDMI Timing7.4. Video Input LimitationsThe following is a list of video signals that are compatible with all units: 480p60 (both 4:3 and 16:9 aspect ratios are supported, however 4:3 content will be stretched horizontally) 576p50 720p50 720p60 1080p24 1080p30 1080p60 1080p24 3D Frame-Packing  720p60 3D Frame-Packing 720p50 3D Frame-Packing 480i 576i 1080iThe following HDMI sources are fully supported: Sony BDP-6200 Blu-Ray player MyGica v7 media playerNOTE:The display may not fully support all HDMI sources. For a complete list of all fully supported HDMI device types, visit our website (www.Ultra-D.com/support) to view the list.
37Signal rendering results in a slight delay in the display of the signal and may be apparent when gaming. It is recommended to use the BYPASS mode when playing games to eliminate the lag time from broadcast to display.The device automatically detects the input signal format. When a supported format is detected, the device automatically adjusts for best use of the detected signal format.Industry Canada statement: This device complies with ISED's licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d' ISED applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable. !եф౗ႝݢᒟ৔܄ႝᐒᆅ౛ᒤݤ!ಃΜΒచ ࿶ࠠԄᇡ᛾ӝ਱ϐեф౗৔ᓎႝᐒǴߚ࿶೚ёǴϦљǵ୘ဦ܈٬Ҕޣ֡όளᏰԾᡂ׳ᓎ౗ǵуεф౗܈ᡂ׳চ೛ीϐ੝܄ϷфૈǶ!ಃΜѤచ եф౗৔ᓎႝᐒϐ٬Ҕόளቹៜ०ૐӼӄϷυᘋӝݤ೯ߞǹ࿶ว౜Ԗυᘋ౜ຝਔǴᔈҥջଶҔǴ٠ׯ๓ԿคυᘋਔБளᝩុ٬ҔǶ!߻໨ӝݤ೯ߞǴࡰ٩ႝߞݤೕۓբ཰ϐคጕႝ೯ߞǶ!եф౗৔ᓎႝᐒ໪הڙӝݤ೯ߞ܈π཰ǵࣽᏢϷᙴᕍҔႝݢᒟ৔܄ႝᐒ೛ഢϐυᘋǶ!!

Navigation menu