PENPOWER TECHNOLOGY BT0001 Bluetooth BLE 4.0 module User Manual
PENPOWER TECHNOLOGY LTD. Bluetooth BLE 4.0 module
Users Manual
Bluetooth 4.0 BLE Module
Model：BT0001
Manual
PenPower
The BT0001 is a high performance Bluetooth 4.0 BLE, (Bluetooth
Low Energy) module using TI's CC2541 SOC chip. The module is
suitable for smart hand-held device low power accessories.
The BT0001 can support ultra-low-power batteries and
sensor-based data collection framework. The Bluetooth 4.0 BLE is
the technology adapted wide-ranging deployment in various
computing & communication application fields.
BT0001 build-in 8051 MCU, in-system software stack
programmable flash memory, 8-KB RAM, and many multiple
configuration options other powerful supporting features and
peripherals, including UART, IIC and GPIO.
BT0001 is 25-pin I/O interface (with back size 9 pin) to bring
UART, I²C or GPIO data to wireless through Bluetooth BLE protocol.
BT0001 build-in the hi-efficiency PCB antenna for compact and easy
assembly application
.
The BT0001 is highly suited for systems where allowing
llowingllowing
llowing
ultralow power consumption is required. It is good applications
pplicationspplications
pplications
to run on the system specified by various operating modes.
short transition's network application.
BT0001 offers absolute interoperability with different vendors’
Bluetooth through the
Bluetooth
low energy and peripheral Roles
proprietary 2.4-GHz applications. It enables robust network
nodes to be built with low power consumption
To speed up the design process, BT0001 provide user friendly
library for both iOS ,Android, PC Windows and MAC developer. The
App designer can focus on their application topic, it is not necessary
for her/him to distract on wireless communication issue. In addition,
we also provide software and hardware develop kit for engineer
firmware development and upgrade.
Property
PropertyProperty
Property
:
Chipset :
Main Chip: TI CC2541
CPU: Low-Power 8051 core with Code protect
RAM: 8-KB RAM With Retention in All Power
Program Flash: In-System-Programmable Flash, 128KB/256KB
Watchdog Timer
Wireless:
Wireless:Wireless:
Wireless:
Bluetooth low energy technology compatible
AES Security Coprocessor
AES Security CoprocessorAES Security Coprocessor
AES Security Coprocessor
2.4
2.42.4
2.4-
--
-GHz
GHz GHz
GHz
Bluetooth
Bluetooth Bluetooth
Bluetooth
low energy Compliant
low energy Compliantlow energy Compliant
low energy Compliant
Excellent Receiver Sensitivity (
Excellent Receiver Sensitivity (Excellent Receiver Sensitivity (
Excellent Receiver Sensitivity (–
––
–94 dBm at 1 Mbps )
94 dBm at 1 Mbps )94 dBm at 1 Mbps )
94 dBm at 1 Mbps )
Antenna: on board PCB antenna
Antenna: on board PCB antennaAntenna: on board PCB antenna
Antenna: on board PCB antenna
Peripheral
PeripheralPeripheral
Peripheral
:
I²C interface
12-Bit ADC With Eight Channels and Configurable Resolution
Powerful USARTs
Battery Monitor
Temperature Sensor
Standard Conformance
Standard ConformanceStandard Conformance
Standard Conformance
:
Bluetooth
v4.0 Compliant Protocol Stack for Single-Mode BLE Solution
Frequency Range:
Frequency Range: Frequency Range:
Frequency Range:
2.412 ~ 2.4835GHz
Interface:
Interface:Interface:
Interface:
Wireless: 2.4G Bluetooth BLE
I²C: Hardward IIC
USARTs
GPIO
Antenna:
Antenna: Antenna:
Antenna:
PCB Antenna on board
-Active Mode RX down to: 17.9mA
-Active Mode TX(0dbm): 18.2mA
-Power Mode 1(4-us Wake-Up): 270uA
-Power Mode 2(Sleep Timer On): 1uA
-Power Mode 3(External Interrupts): 0.5uA
-
Wide Supply-Voltage Range (2 V–3.6 V)
Power Supply :
Power Supply : Power Supply :
Power Supply :
3.3V input
PCBA
PCBA PCBA
PCBA Dimension
DimensionDimension
Dimension:
: :
:
15(W) x 18(L) x 2.03 (H) mm.
Environment
EnvironmentEnvironment
Environment-
--
-Friendly Compliance:
Friendly Compliance: Friendly Compliance:
Friendly Compliance:
RoHS
SW:
SW:SW:
SW:
iOS Library: Supported
Android Library: Supported
PC Windows Library: Supported
MAC OS Library: Supported
Federal Communications Commission (FCC) Statement
The final end product must be labeled in a visible area with the following: “Contains FCC ID: QIC-BT0001”.
The Original Equipment Manufacturer (OEM) must ensure that the OEM modular transmitter must be labeled with its
own FCC ID number. This includes a clearly visible label on the outside of the final product enclosure that displays the
contents shown below. If the FCC ID is not visible when the equipment is installed inside another device, then the
outside of the device into which the equipment is installed must also display a label referring to the enclosed
equipment.
You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could
void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1) this device may not cause harmful interference, and
2) this device must accept any interference received, including interference that may cause undesired operation of the
device.
FCC RF Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must
follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be
co-located or operating in conjunction with any other antenna or transmitter.
According to FCC Part 15 Subpart C Section 15.212, the radio elements of the modular transmitter must have their
own shielding. However, due to there is no shielding for this Bluetooth Module, this module is granted as a Limited
Modular Approval. When this Bluetooth Module is installed into the end product, a Class II Permissive Change or a
New FCC ID submission is required to ensure the full compliance of FCC relevant requirements.