PETKIT NETWORK TECHNOLOGY P220 Petkit P2 User Manual
SHANGHAI PETKIT NETWORK TECHNOLOGY CO., LTD. Petkit P2
User Manual
LOOP
环型扣
COIN CELL
纽扣电池
OPENER
开启器
PETKIT P2
小佩智能挂件2
BAND
束带
微信扫描二维码（限中国地区）
免费下载专有应用： 小佩宠物
将主机一边放入环形扣，用力下压另外
一边，听到“啪”的一声即可。
Attach the pet collar with the BAND
and LOOP hook buttoned up on one side,
button up the other side accross the pet collar.
Place one side of the device into the LOOP and press
the other until you hear a click.
LED
Download the PETKIT Application from the App Store or Google Play.
Create an account and link PETKIT by App Guide. PETKIT P2 smart device with the application is not medical equipment
and not applicable for neither medical treatment nor disease preventing.
Please be aware that any change you make on your pet might lead
to severe consequence. Please consult your veterinarian for
professional guide and advice before taking action.
Scan the code by WeChat to download.
(the code for Chinese area)
先将束带一端的孔位穿入环形扣的一边“耳朵”，
然后绕过宠物项圈将另一孔位扣入环形扣的另一边“耳朵”。
从 App Store 或 Google Play 下载应用：小佩宠物。
创建账户，并按照应用界面提示链接并绑定小佩智能挂件，
小佩智能挂件灯光闪烁表示绑定成功。
Scan to join
PETKIT’s after-sales services,
Available for WeChat users.
微信扫描二维码，
“小佩宠物”微信客服为你解答。
扫描二维码查看官方网页
Available on the
App Store
Android app on
PETKIT 的小佩智能挂件并不是医疗器械。
小佩智能挂件及其相关的应用程序不得用于诊疗、治疗或防止任何
疾病或宠物身体状况。小佩可以作为宠物的生活规律是否健康的参考，
当小佩发现宠物生活规律发生变化时，建议主人向专业的宠物医生
咨询或去宠物医院就诊。
SHANGHAI PETKIT NETWORK TECHNOLOGY Co., Ltd.
WWW.PETKIT.COM
WWW.PETKIT.COM
Get more information from website.
OVERVIEW
产品概览
将开启器插入凹槽，
然后撬起电池盖。
Place the OPENER into the notch
and open the cell cover.
打开小佩智能挂件2
OPEN PETKIT P2
将电池正极(+)朝下放入电池盖中，然后
将电池盖边缘与主机壳对齐，用力按压，
听到“啪”的一声即可，
此时正面LED灯闪烁三下。
Place battery into cell cover with the positive(+)
side facing down. Align the edge of cell cover with main part
and press firmly until you hear a click.
LED on the front side glimmers three times.
放入电池
INSERT BATTERY
装配到环形扣
ATTACH THE LOOP
装配到项圈
ATTACH THE COLLAR
手机和小佩智能挂件2配合
LINK PETKIT P2 AND SYNC
服务与支持
SERVICE AND SUPPORT
注意事项
ATTENTION
USER MANUAL
用户手册
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
Thisdevicecomplieswithpart15oftheFCCrules.Operationissubjecttothefollowingtwo
conditions:
(1)thisdevicemaynotcauseharmfulinterference,and
(2)thisdevicemustacceptanyinterferencereceived,includinginterferencethatmaycause
undesiredoperation.
Changesormodificationstothisunitnotexpresslyapprovedbythepartyresponsiblefor
compliancecouldvoidtheuser'sauthoritytooperatetheequipment.
In order to comply with RF exposure requirements, a minimum
all persons distance of 5mm must be
maintained between the antenna and