PHILIPS Consumer Electronics DLA93050 In-car FM transmitter and charger for use with iPod User Manual NEW TransDock Manual
Philips Consumer Electronics B.V. In-car FM transmitter and charger for use with iPod NEW TransDock Manual
Manual
© 2008 Digital Lifestyle Outfitters
The DLO logo, Digital Lifestyle Outfitters and TransDock
are trademarks of Digital Lifestyle Outfitters. iPod is
a trademark of Apple Inc., registered in the U.S. and
other countries.
All Rights Reserved
Printed in China M-93050-XXXXXX-A
Quick Start 4
Controls + Connections 6
Included in the Box 7
TransDock Controls Chart 8
About the DLO TransDock 9
Using Your TransDock 10
Setting Up Your TransDock 10
Finding Empty Radio Frequencies 12
TransDock Features + Settings 14
TransDock Modes 14
Setting and Using Preset Stations 15 Charging
Cell Phones/PDAs/Gaming Systems or Other USB Devices 15
Watching iPod Videos on a Mobile Video System 16
TransDock Intelligent Power Control 16
Getting the Best Sound Quality with Your DLOTransDock
17
Switching Between Monaural and Stereo Mode 18
Using TransDock with a Cassette Adapter or Your Car’s Auxiliary Input
19
Using TransDock with Other MP3 Players or Devices
19
Tips + Troubleshooting 20
Tech Specs 23
Service + Support 24
Warranty 25
FCC Statement 26
Quick Start
Thanks for purchasing the DLO TransDock, the all-in-one iPod dock for your car.
We’ll get you up and running in 4 easy steps:
STEP 1 - Connect the Charger Arm to the TransDock Cradle.
STEP 2 - Adjust the TransDock to fit into your auto power outlet and plug it in.
STEP 3 - Tune your car stereo to 88.5 FM.
STEP 4 - Slide your iPod into the TransDock and press Play.
You can now enjoy your iPod music played through your car stereo while your iPod is
charging and securely cradled. For more detailed instructions and tips, please read Setting
Up Your TransDock [pg 10].
About the DLO TransDock
TransDock is basically a radio station that broadcasts your iPod audio to the FM radio in
your car, truck, boat – anything that has a 12v auto power outlet and FMradio. It
charges the battery in your iPod while cradling it for easy access in your car. It will also
charge most USB-chargeable cell phones, PDAs, gaming systems or other devices, as
well as broadcast audio from most digital devices over your car stereo. If that’s not
enough, the TransDock features an AV-Out port so you can watch iPod video content
over most mobile video systems in your car, truck or minivan.
Turning TransDock Off or On
To manually turn TransDock off or on while car power is on, press and hold the Mode
Button down for 3 seconds.
NOTE: TransDock normally turns on & off automatically with your car.
Setting a Preset
1. Press the Mode Button to access Preset Mode [ PRE ].
2. Select preset number with Up or Down Buttons [ PRE 6 - PRE 1 ]
3. Push and hold down Up or Down Button until OK appears on the OLED display in
order to save your preset station.
Resetting TransDock to default or factory settings
To reset your TransDock, hold the Mode Button down for seven seconds with the unit
either on or off. The OLED will display RSET OK when reset is complete.
Setting Up Your TransDock
1. Connect the Charger Arm to the TransDock Cradle.
Take the Charger Arm, insert the flat side into the back of the TransDock Cradle body
and turn 90 degrees clockwise to lock it into place. Do not use the included Extension
Arm until you have determined that you’ll need it to fit TransDock into your car.
TransDock fits in most cars with just the shorter Charger Arm.
2. Adjust your TransDock to fit into your auto power outlet and plug it in.
Loosen the Charger Arm knobs to adjust the angle of the TransDock for the best
placement and access to your iPod. Adjusting the arm angles is easier when the
TransDock is not plugged into the auto power outlet. When you’ve found a good fit,
tighten the knobs back up and then plug the TransDock into your auto power outlet. If
you have trouble finding a comfortable position for the TransDock, or it happens to block
controls in your car, use the TransDock Extension Arm to try another position.
3. Tune your car stereo to 88.5 FM.
This is the initial broadcast frequency for the TransDock. If your TransDock is already
plugged in, there should be silence. If 88.5 is not an empty frequency in your area (i.e.
there is music or talk already on that station) you may hear static. Try finding another
station in your area with less interference. For help doing this, please see Finding Empty
Radio Frequencies [pg. 12] or visit www.dlo.com/openfm to find the best frequencies in
your area.
NOTE: It is very important that you set your iPod EQ to Off and adjust your car’s bass
and treble controls to zero to get the best initial performance from TransDock. Then, you
can experiment with adding bass and treble to your desired preference.
4. Slide your iPod into the TransDock and press Play.
• For a thinner iPod (80GB iPod classic for example), remove any insert and attach the
included Fit Pad for a perfect fit. Then, slide in your iPod.
• For a larger iPod (160GB iPod classic) - remove any insert, then slide in your iPod.
• For 3G iPod nano owners - use the included 3G nano insert to securely fit your 3G iPod
nano into your TransDock.
• For 2G iPod nano owners - use the included 2G nano insert to securely fit your 2G iPod
nano into your TransDock.
Changing Your TransDock Faceplates
TransDock features changeable faceplates that allow you to customize the look of your
TransDock. Two faceplates are included, Black and Silver. Additional faceplate colors
and styles will be available soon. Check http://www.dlo.com for more information.
To change your TransDock faceplate, carefully separate the faceplate from the back of
the TransDock body with your fingernail or a small flathead screwdriver. Then, carefully
lift the sides over the control buttons and away from the TransDock. To snap on the new
faceplate, carefully guide the sides of the faceplate over the buttons and snap into place.
You can now enjoy your iPod music played through your car stereo while your iPod is
charging and securely cradled in your car. Control your iPod with its Click Wheel, just as
you normally would – except for the volume. Use your car stereo to adjust the volume
instead of the iPod. Your TransDock is using the superior line-out audio from the bottom
of your iPod, which is not controlled by your iPod volume control on its Click Wheel.
Finding Empty Radio Frequencies
An empty frequency is one where there is only static and not even a faint radio station
can be heard. If you live in a big city with a lot of radio stations, finding an empty FM
frequency can be tricky. Visit www.dlo.com/openfm to find the best frequencies in your
area.
Here are some tips for finding an empty frequency:
• Be sure to search the entire spectrum of FM frequencies, from 88.1 to 107.9. Don’t just
look to the low end of the dial, because there are often empty FM stations in the 100’s
that will work great.
• When using the scan/seek function on your car stereo, if your tuner stops on 101 and
then jumps to 103, look in the 102 range of frequencies for an empty frequency.
• Try scanning to a strong station, then backing down two frequencies - for example
103.5 to 103.1. You can often find empty frequencies this way. If that frequency is taken,
scan to the next station and try again.
• Save a station as a preset on your radio when you find a frequency that works well in
your area, and also set that frequency as a preset on your TransDock. To learn how
to set a preset, please read Setting and Using Preset Stations [pg. 15].
Tuning Your TransDock
To tune your TransDock, use the Up/Down Buttons on the right side of the TransDock
Cradle. Use the Up Button for tuning up, and the Down Button for tuning down.
The TransDock also has 6 preset stations you can try. The default frequencies for these
presets are 88.1, 88.5, 94.9, 100.9, 103.9 and 107.9. To cycle through these presets, press
the Mode Button on the left side of the TransDock once, or until you see [ PRE ]
displayed on the TransDock OLED. Next, simply press the Up or Down Button to cycle
through the preset frequencies. The OLED will show which preset number you’re
broadcasting to (i.e. PRE1, PRE2, etc), and then the preset frequency. You can set your
own preset when you find frequencies that work well in your area. To learn how, read
Setting and Using Preset Stations [pg. 15].
TransDock Modes
TransDock features multiple modes to let you customize your listening (or viewing)
experience in the car.
1.Manual Tuning Mode (e.g.“88.5” or other frequency displayed), which is the default
mode, allows you to tune your TransDock using the Up/Down Buttons on the side of the
unit.
2.Preset Mode [ PRE ] lets you tune to 6 different frequencies you’ve set as preset
stations for quick and easy tuning. Just find the frequencies that work best and set them
as presets by pressing the Up/Down Buttons simultaneously and then tune to them in
Preset Mode [ PRE ]. See Setting and Using Preset Stations [pg. 15]
3.Settings Mode [ SET ] gives you several different selections to customize your
TransDock.
Choose from:
•Backlight Timer [ TIME ] lets you turn TransDock’s backlight off after a certain period
of time - select between 00, :05, :10, :20 and ON
See TransDock Controls Chart [pg. 8]
•Backlight Brightness [ LITE ] lets you adjust the brightness of the OLED display –
Select levels from LITE 1 to LITE 4.
•Level Adjust [ LEV ] gives you the option of selecting the volume output level that fits
you particular music. Select levels from LEV 1 to LEV 3.
•Reset All TransDock Settings to Default [ RSET ] will quickly reset your TransDock to
the factory settings.
NOTE: To set up your TransDock in Settings Mode, simply press the Mode Button until
the display shows [ SET ] and then scroll through the Settings menu using the Up
Button on the right side of the TransDock. When you have found the setting you’d like to
adjust, use the Up/Down Buttons to scroll through its options. After you have made your
selection, press the Mode Button again. Please refer to the TransDock Controls Chart [pg.
8] for a quick reference to the TransDock controls.
• Audio Adjust [ AUD ] allows you to switch between Monaural and Stereo Mode.
Setting and Using Preset Stations
To set your own preset stations, follow these simple steps:
1. Using the Up/Down Buttons, tune TransDock to the station you’d like to save as a
preset.
2. Press the Mode Button to access Preset Mode [ PRE ].
3. Using the Up/Down Buttons, select the preset channel (1-6) that you would like to set
for this frequency.
4. Press and hold the Up/Down Buttons until OK appears on the LCD to save your preset.
5. Repeat steps 1 - 3 for all available preset channels (up to six).
NOTE: To cycle through your preset stations, briefly press the Mode Button until you are
in Preset Mode [ PRE ] and cycle through your preset stations using the Up/Down
Buttons.
Charging Cell Phones/PDAs/Gaming Systems or Other USB
Devices
TransDock features a USB port on the bottom of the unit. You can use this port to charge
most USB devices like cell phones or PDAs. See Controls + Connections [pg.6]. Simply
plug in your device with the appropriate cable (available separately).
Watching iPod Videos on a Mobile Video System
If you have a mobile video system in your car, the TransDock will play your iPod video
and audio content over the system, while it charges your iPod. Simply plug in an AV
mini cable (available separately) into the AV-Out port on the bottom of the TransDock
and attach the connectors at the other end to your car’s AV inputs.
IMPORTANT: With your iPod connected to the TransDock, make sure that your iPod
TV Out setting under Video Settings is set to either Ask or On.
Controlling the OLED Backlight
TransDock features an indigo blue backlit OLED display. The backlight comes on
automatically when you power up TransDock, and any time you change frequencies. By
default, the backlight automatically dims after 10 seconds.
You can program the backlight to turn off after a certain period of time (or have it always
on or off) under the Settings Mode on the TransDock. See TransDock Controls Chart [pg.
8]
TransDock Intelligent Power Control
TransDock features Intelligent Power Control. TransDock turns on automatically when
you plug it in to your auto power outlet or connect your iPod, then automatically shuts
itself off when not in use for one minute (i.e. when no player or device is attached). This
feature is ideal for cars whose auto power outlets continue to draw power, even when the
car is off. TransDock will turn itself off – protecting your car’s battery.
To manually power down TransDock, hold the Mode Button down for three seconds.
This will completely turn off the TransDock until you manually turn it on again or it
automatically turns on as described above. To manually turn TransDock back on while
off, press and hold the Mode Button for three seconds.
Getting the Best Sound Quality with Your DLO TransDock
• It is very important that you set your iPod EQ to Off and adjust your car’s bass and
treble controls to 0 to get the best initial performance from TransDock. Then, you can
experiment with adding bass and treble to your desired preference.
• TransDock features a Level Adjust setting that allows you to tailor the response of the
unit to best match the type of audio source or music content that’s playing. To adjust the
Volume Level Output on your TransDock, press the Mode Button until the OLED
displays [ SET ], then press the Up Button until you see [ LEV ] appear on the display.
Then, simply press the Down Button to the desired level (1-3).
NOTE: Different types of music will sound better at different Volume Output levels on
TransDock. Experiment to see what level best suits your music.
• Make sure the frequency you’ve tuned to is empty. A good place to start is 88.5, which
is the initial frequency on the TransDock and is often an open frequency. Visit
www.dlo.com/openfm to search for the best frequencies in your area.
• TransDock will tune to any radio frequency, from 88.1 to 107.9, so try the entire
spectrum until you find an unoccupied channel. To learn more see Finding Empty Radio
Frequencies [pg. 12].
• Be sure to manage your music’s volume, bass and treble settings using your car
stereo’s controls.
• Switch between Monaural or Stereo Mode (see below).
Switching Between Monaural and Stereo Mode
With the DLO TransDock you have the choice of transmitting in either Monaural or
Stereo Mode. Choose between the two based on what type of audio you’re playing and
what sounds best to you.
Monaural Mode allows for much better transmitter performance and is also useful for
listening to audiobooks and most podcasts. When you have a clear, empty signal to
broadcast to, use Stereo Mode for best sonic musical performance. If the static increases
or you move to a crowded FM radio area, try Monaural Mode for the best transmitter
performance.
To switch between Audio Modes, press the Mode Button until the display reads [ SET ],
then press the Up Button until you enter Audio Adjust [ AUD ]. Press the Down Button
to choose between Monaural [ MN ] or Stereo Mode [ ST ].
Using TransDock with a Cassette Adapter or Your Car’s Auxiliary
Input
TransDock can be connected to your car stereo with a cassette adapter or a mini plug for
cars with Aux-In jacks. This is great because your TransDock will provide access to the
superior line-out signal from the iPod dock to your cassette adapter or car Aux In, while
still cradling and charging your iPod.
The AV-Out port is located on the bottom of the TransDock. Simply plug your cassette
adapter or mini cable (available separately) into the TransDock AV-Out port, then plug
your cassette adapter or mini plug directly into your car as you normally would.
Using TransDock with Other MP3 Players or Devices
TransDock will also transmit the music from other devices like other iPods, MP3 players,
portable game devices, portable DVD players, etc. To do this, plug your audio device into
the TransDock’s Aux-In jack using a standard male-to-male mini cable (available
separately). TransDock will broadcast the attached device’s audio using the FM
transmitter.
When TransDock is broadcasting audio from another device, it is very sensitive to the
variable output levels of the device. To get the best sound and performance in this
situation, you will need to adjust the volume level of your device, until there is no
distortion. Then, control the overall volume of your music with your car stereo’s volume
control, not the device.
I can’t seem to find a comfortable fit for TransDock in my car.
All car interiors are different in their placement of their auto power outlets. It can be
challenging to fit TransDock into certain cars. Start by loosening the arms for complete
flexibility when attempting to fit the unit into your car. Then, try using the Extension
Arm to fit difficult or out-of-the-way positions. If you have tried all possible adjustments
and still can’t find a good connection, please visit our website at www.dlo.com and click
Support.
I’m having trouble finding an empty FM frequency in my area.
Be sure to look in the 100’s, not just in the 80’s or 90’s. Try scanning to a strong station,
then back down two frequencies - for example 103.5 to 103.1. If that frequency is taken,
try scanning to the next strong station and repeat. For more tips and information see
Finding Empty Radio Frequencies [pg. 12], or visit www.dlo.com/openfm to search for
the best frequencies in your area.
My music is playing, but there seems to be a lot of static.
First, check that you have found an empty frequency. Unplug the TransDock to see if
there might be a radio station interfering. If so, try another frequency. Also, you may
need to try a different setting on the Level Adjust. See Getting the Best Sound Quality
with Your DLOTransDock [pg. 17] or for more tips and information see Finding Empty
Radio Frequencies [pg. 12], or visit www.dlo.com/openfm to search for the best
frequencies in your area.
My iPod video is not playing over my car’s video system.
With your iPod connected to the TransDock, make sure that your iPod TV Out setting
under Video Settings is set to either Ask or On.
My music sounds bass-heavy or distorted when played through the TransDock.
It is very important that you set your iPod EQ to Off and adjust your car’s bass and treble
controls to zero to get the best initial performance from TransDock. Then, you can
experiment with adding bass and treble to your desired preference. Then, try changing the
Level Adjust setting on the TransDock. Also, make sure your car stereo’s bass and treble
are set to zero, and your iPod EQ is set to Off. See Getting the Best Sound Quality with
Your DLOTransDock [pg. 17]
My radio will only scan/seek to occupied FM stations.
Many car radios default to scan/seek mode for tuning, so they automatically tune to a
radio station. Most of these radios can be switched to manual tuning (consult your car or
stereo manual on how to do this). You can also “find” your TransDock’s frequency by
scanning to it. Your car stereo’s scan/seek function will most likely find the TransDock.
If I leave the TransDock plugged into my car’s power outlet, will it drain my car battery?
No. The Intelligent Power Control will automatically turn off the TransDock after one
minute of inactivity (when no player or device is attached). When off, the TransDock
does not present a significant drain on a car battery.
Can I use the TransDock with the iPod shuffle or other devices?
Yes, the TransDock will broadcast the audio from another iPod, MP3 players, portable
gaming systems, portable DVD players, laptops or any other audio device. Simply plug
any audio device into the TransDock Aux-In jack on the bottom of the unit using a
standard male-to-male mini plug (available separately).
Tech Specs
FM Transmitter
Modulation: FM Stereo
RF Output Frequency Range: 88.1 - 107.9 MHz
Six Default Preset Frequencies (MHz): 88.1, 88.5 (initial), 94.9, 100.9, 103.9 and 107.9
Frequency Adjustment: 0.1 MHz per step
Frequency Response: 50Hz ~ 18KHz
Transmitter Range: Up to 27 feet (8.2M)
Tuning: Digitally controlled crystal oscillator
International frequency compatible
FCC compliant: (FCC ID # : UIX0712D)
Power
Input Voltage: 12 – 16 VDC
Input Current: <400mA @ DC12V-16V when charging
Connectors
Auxiliary Input Jack: 3.5mm Stereo mini jack
Direct Output: iPod AV Out / Stereo mini jack
Temperature
Storage Temperature: - 4° to 122° F (-20° to 50° C)
Operating Temperature: -14° to 104° F (-10° to 40° C)
For more information, updates and tips, please visit our website at www.dlo.com and
click Support.
Digital Lifestyle Outfitters Limited Manufacturer’s Warranty
What This Warranty Covers. DLO (Digital Lifestyle Outfitters) warrants this product
against defects in materials and workmanship. This limited warranty applies only to
products manufactured by or for DLO.
What This Warranty Does Not Cover. This warranty does not apply to damage caused
by: (a) accident, abuse, misuse, misapplication, ordinary wear, improper maintenance,
failure to follow instructions, or products not manufactured by or for DLO; and (b)
aftermarket services (including upgrades and expansions).
How Long This Warranty Lasts. This warranty lasts for a period of ninety (90) days
from the date of original retail purchase.
What DLO Will Do. If a defect exists, DLO will exchange the product, at its option, with
a product that is new or has been manufactured from new or serviceable used parts and
that is at least functionally equivalent to the original product. DLO will warrant a
replacement product against defects in materials and workmanship for a period of ninety
(90) days from the date of replacement.
How To Get Service. In order to be eligible for this warranty, you MUST register your
purchase at www.dlo.com/register within thirty (30) days of purchasing this product. If
you believe that this product is defective in materials or workmanship, please e-mail
customerservice@dlo.com with a brief description of the problem, for further
instructions.
No Change To Warranty. No DLO reseller, agent or employee is authorized to make any
modification, extension, or addition to this warranty.
How State Law Applies. This warranty gives you specific legal rights, and you also may
have other rights that vary from state to state, or country.
Restrictions On Implied Warranties. All implied warranties, including, without
limitation, warranties of merchantability and fitness for a particular purpose, are limited
in duration to the duration of this warranty. Some states do not allow limitations on how
long an implied warranty lasts, so the above limitation may not apply to you.
Restrictions On Damages. DLO is not responsible for direct, special, incidental or
consequential damages resulting from any breach of warranty or condition or under any
other legal theory (including, without limitation, lost profits; downtime; goodwill;
damage to or replacement of equipment and property; failure to maintain the
confidentiality of data stored on the product; and any costs of recovering, reprogramming
or reproducing any program or data stored in or used with products manufactured by or
for DLO). Some states and countries do not allow the exclusion or limitation of
incidental or consequential damages, so the above limitation or exclusion may not apply
to you.
W1000-050803-B
Federal Communications Commission Interference Statement
This device complies with Part 15 of the FCCrules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
CAUTION: The manufacturer is not responsible for any radio or TV interference caused
by unauthorized modifications to this equipment. Any such modification could void the
user’s authority to operate the equipment.