PHILIPS Consumer Electronics ID937 US DECT PHONE -- BASE User Manual ID9370 IFU EN US

Download:
Mirror Download [FCC.gov]
Document ID	772506
Application ID	ArASGVkRMzx1kSrOy5Wi/w==
Document Description	users manual 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	275.57kB (3444620 bits)
Date Submitted	2007-03-26 00:00:00
Date Available	2007-03-27 00:00:00
Creation Date	2007-03-16 14:35:33
Producing Software	Acrobat Distiller 5.0 (Windows)
Document Lastmod	2007-03-16 14:36:02
Document Title	ID9370_IFU_EN_US.book
Document Creator	PScript5.dll Version 5.2
Document Author:	janice

ID9370_IFU_EN_US.book Page 6
Tuesday, February 13, 2007
12:48 PM
ID9370_IFU_EN_US.book Page 7
Tuesday, February 13, 2007
12:48 PM
Contents
10
10
11
12
12
14
15
17
22
23
25
27
29
EN
Safety information
Important Information
For your safety
Need Help?
Configure your ID9370
Install battery
Language
Registration
What’s in the box?
Your ID9370
Overview of the handset
Install
Call
Personal Settings
Advanced Settings
Games
Troubleshooting
Information
Index
ID9370_IFU_EN_US.book Page 8
Tuesday, February 13, 2007
12:48 PM
Important Information
EN
For your safety
This equipment is not designed to make emergency calls in the event of a power failure.
Alternative arrangements should be made for access to emergency calls.
To avoid damage or malfunction:
- Do not allow the product to come into contact with liquid.
- Do not open it as you could be exposed to high voltages.
- Never use any battery type other than the one supplied.
- Do not hold the handset too close to your ear when the phone is ringing or when
activating the loudspeaker as it may damage your hearing.
- Do not expose the phone to excessive heat caused by heating equipment or direct
sunlight.
- Do not drop your phone or allow objects to fall on your phone.
- Do not use any cleaning agents containing alcohol, ammonia, benzene, or abrasives as these
may harm the set.
- Active mobile phones in the vicinity may cause interference.
About operating and storage temperatures:
- Operate in a place where temperature is always between 0 and 35º C (32 to 95º F).
- Store in a place where temperature is always between -20 and 45º C (-4 to 113º F).
- Battery life may be shortened in low temperature conditions.
Need Help?
For more information on troubleshooting:
Troubleshooting: page 25
Please refer to the following website for more information on Philips web support:
Online Support
www.philips.com/support
ID9370_IFU_EN_US.book Page 9
Tuesday, February 13, 2007
12:48 PM
Configure your ID9370
EN
Install battery
Your ID9370 is supplied with 2 rechargeable batteries allowing approximately up to 12 hours of
talk-time and up to 150 hours stand-by time. Before using the handset, the batteries have to be
installed and fully charged.
1.
Use the coin or screwdriver to unlock the battery cover.
anticlockwise
screw
charger contact plate
Unlock
Bottom View
2.
Place the batteries as indicated and replace the cover.
3.
Lock the battery cover.
clockwise
screw
charger contact plate
Lock
Bottom View
Please use a coin or screwdriver that is the right shape and size for the screw that is used.
Otherwise you may damage the screw when tightening it.
ID9370_IFU_EN_US.book Page 10
Tuesday, February 13, 2007
12:48 PM
Configure your ID9370
EN
Language
Your ID9370 can support different display languages.
To change the language
Press mMENU, scroll : to Personal Set and press mSELECT, scroll
guage and press mSELECT.
Scroll : to your desired language and press mSELECT to confirm.
A validation tone is emitted and the screen returns to previous menu.
1.
2.
: to Lan-
Registration
The procedures described below are the procedures that you will find in your ID9370 handset.
The procedures may vary according to the handset you want to register. In this case, please
refer to the manufacturer of the additional handset.
Additional handsets must be registered to the base unit before you can use them. Up to 6
handsets can be registered to one base station.
The Master PIN is required before you can register or unregister handsets. The default
PIN is 0000.
Register your ID937
After charging it for a few minutes, the word WELCOME appears on a blue screen. Next, the
idle screen appears. Follow these steps to register your handset:
1.
In idle mode, the message “Press Base page key for 3 secs. Press and hold m” will be
prompted on the screen. Follow the screen instructions to start registration.
2.
Enter PIN will be displayed on your screen. Enter the default Master PIN number - 0000.
3.
Press mOK to confirm your registration.
All the handset keys (except the
process is completed.
10
m key) are deactivated until the above registration
ID9370_IFU_EN_US.book Page 11
Tuesday, February 13, 2007
12:48 PM
What’s in the box?
EN
The following accessories are included:
Handset
Splitter
Power supply for
base station
User Guide
2 AAA rechargeable
NiMH batteries
Warranty card
11
ID9370_IFU_EN_US.book Page 12
Tuesday, February 13, 2007
12:48 PM
Your ID9370
EN
Overview of the handset
Event LED
(top of the handset)
LCD Screen
Up/Down Navigation
keys
Earpiece
Left Soft key
Right Soft
key
Talk key
Hang-up key
Alphanumeric keypad
Case key / Pause
key /
Intercom key
Keypad lock key /
Format key
Loudspeaker key
Microphone
12
ID9370_IFU_EN_US.book Page 13
Tuesday, February 13, 2007
12:48 PM
Your ID9370
EN
Handset keys
Press
To
Enter the main menu from stand-by mode.
Select the function displayed on the handset screen directly above it.
Activate mute function during a call.
Switch on the backlight.
Go to redial list from stand-by mode.
Select the function displayed on the handset screen directly above it.
Initiate a second call, consult phonebook, call transfer or activate/deactivate
HD Sound mode during a call.
Switch on the backlight.
Answer an incoming external or internal call.
Insert R for operator services when on the line.
Hang up a call.
Return to stand-by mode.
Long press in stand-by mode to switch off the handset, short press to switch
on the handset again.
Access call log from stand-by mode.
Scroll up a menu list or go to the previous phonebook or call log record.
Increase earpiece volume during a call.
Go to the previous character in editing mode.
Access phonebook from stand-by mode.
Scroll down a menu list or go to the next phonebook or call log record.
Decrease earpiece volume during a call.
Go to the next character in editing mode.
Initiate an internal call in idle mode.
Short press to initiate an internal call during a call or switch call between an
internal and external call.
Long press to initiate a conference call with an external call and another
internal call.
Answer an incoming call in handsfree mode.
Activate and deactivate the loudspeaker* during a call.
Dial # in stand-by mode.
Long press to mute the ringer in stand-by mode.
Long press to insert a pause in dialling mode.
Long press to switch between upper and lower case in editing mode.
Dial * in stand-by mode.
Long press to activate and deactivate keypad lock.
Change the display format when viewing a 7-, 10- or 11-digit call log record
(with numbers starting with the digit 1).
*WARNING Handsfree activation can suddenly increase the volume in the earpiece to a
very high level. Make sure the handset is not too close to your ear.
13
ID9370_IFU_EN_US.book Page 14
Tuesday, February 13, 2007
12:48 PM
Install
EN
Install battery
See page 9.
Charge battery
1.
Place the handset on the charging cradle of the base station. A beep tone is emitted if the
handset is placed correctly.
A charging animation on the handset indicates that the battery is charging.
2.
Philips
08-08
MENU
3.
4.
06:00pm
REDIAL
Leave it there until the batteries are fully charged (at least 24 hours).
The handset is fully charged when the charging animation stops and
is displayed.
The handset must be charged for at least 24 hours before using it for the first time.
Low battery warning
The battery level is shown at the top left of the handset screen. When the battery level
becomes low, an empty battery icon is displayed on the screen.
If the battery level becomes exceedingly low, the phone automatically switches off and any
function in progress will not be saved.
Out of range warning
The indoor and outdoor range of the phone is up to 50 metres and 300 metres respectively.
When the handset moves beyond operation range, the antenna icon
will blink.
14
ID9370_IFU_EN_US.book Page 15
Tuesday, February 13, 2007
12:48 PM
Call
EN
Intercom
This feature is only available when there are at least 2 registered handsets. It allows you to make
free internal calls, transfer external calls from one handset to another and use the conference
option.
Intercom another handset
To be able to use intercommunication feature, you must have at least 2 handsets registered to
your base station (see page 10 "Registration").
1.
Press c key in stand-by mode.
2.
Intercom is established immediately if there are only 2 registered handsets. If there are
more than 2 registered handsets, the handset numbers which are available for intercom
will be displayed. Scroll : to All Handsets and press mSELECT to call all the handsets
or scroll to the specific handset you want to call and press mSELECT.
If the handset does not belong to ID9370 range, this function may not be available.
Transfer an external call to another handset
1.
2.
During the call, make a long press on c key to put the external call on hold (the caller
can no longer hear you).
Intercom is established immediately if there are only 2 registered handsets. If there are more
than 2 registered handsets, the handset numbers which are available for intercom will be
displayed. Scroll : to All Handsets and press mSELECT to call all the handsets or
scroll to the specific handset you want to call and press mSELECT. The called handset
rings.
If there is no answer from the called handset, press c key to resume the external call.
3.
4.
Press r key on the called handset to answer the internal call, where both internal callers can talk.
Press e key on the first handset to transfer the external call to the called handset.
Switch between an internal and external call
1.
Press c key once to switch between an internal call and external call.
15
ID9370_IFU_EN_US.book Page 16
Tuesday, February 13, 2007
12:48 PM
Call
EN
Three-party conference call
The conference call feature allows one external call to be shared with two handsets (in intercom). The three parties can share the conversation and no network subscription is required.
1.
Press and hold c to put the external call on hold and start the intercom procedure (the
caller can no longer hear you).
2.
Long press c to display the handset numbers which are available for intercom. Scroll :
to All Handsets and press mSELECT to call all the handsets or scroll to the specific
handset you want to call and press mSELECT.
The called handset rings.
3.
Press r key on the called handset to answer the internal call, where both internal callers can talk.
4.
Press and hold c for 2 seconds on the first handset to start the three-party conference,
whereby Conference is displayed on the screen.
TIP If Conference mode is activated, a three-party conference call is automatically
established if the second handset takes the line when there is already an external call
in progress.
16
ID9370_IFU_EN_US.book Page 17
Tuesday, February 13, 2007
12:48 PM
Personal Settings
EN
Personal Set
Handset Tones
Wallpaper
Contrast
Handset Name
Language
Babysit Mode
Backlight Time
Theme Colour
Handset Tones
Ring Volume
There are 5 ringer volume options (Silence, Low, Medium, High and Progressive). The default
level is Medium.
To set ring volume
1.
2.
Press mMENU, scroll : to Personal Set and press mSELECT, press mSELECT
to enter Handset Tones and press mSELECT again to enter Ring Volume.
Scroll : to your desired volume level and press mSELECT to confirm.
A validation tone is emitted and the screen returns to previous menu.
When Silence is activated, the icon
is displayed on the screen.
WARNING When the handset rings during an incoming call, please do not hold the
handset too close to your ear as the volume of the ringing tone may damage your hearing.
Ring Melody
There are 16 ring melodies available on your handset.
To set Ring Melody
1.
2.
3.
Press mMENU, scroll : to Personal Set and press mSELECT, press
to enter Handset Tones, scroll : to Ring Melody and press mSELECT.
Scroll : to your desired melody to play the melody.
Press mSELECT to set the ring melody.
A validation tone is emitted and the screen returns to previous menu.
mSELECT
17
ID9370_IFU_EN_US.book Page 18
Tuesday, February 13, 2007
12:48 PM
Personal Settings
EN
Group Melody
To benefit from this feature, you must subscribe to the Caller Line ldentification service.
This menu enables you to select and set the melodies to be played when there is an external
incoming call from a contact whose name is stored in your phonebook and is part of a group.
You can associate 1 ring melody to each group.
There are three phonebook groups (Group A, B, C) available for you to organise your contacts.
Each group can be assigned a unique melody.
To set Group Melody
1.
Press mMENU, scroll : to Personal Set and press mSELECT, press mSELECT
to enter Handset Tones, scroll : to Group Melody and press mSELECT.
2.
Scroll : to the group for which you wish to set melody and press mSELECT.
3.
Scroll : to the desired melody to play the melody.
4.
Press mSELECT to set the group melody.
A validation tone is emitted and the screen returns to previous menu.
Key Beep
A single beep is emitted when a key is pressed. You can enable or disable the key beep. By
default, the key beep is On.
To set key beep On/Off
1.
Press mMENU, scroll : to Personal Set and press mSELECT, press
to enter Handset Tones, scroll : to Key Beep and press mSELECT.
2.
Scroll : to On or Off and press mSELECT to confirm.
A validation tone is emitted and the screen returns to previous menu.
18
mSELECT
ID9370_IFU_EN_US.book Page 19
Tuesday, February 13, 2007
12:48 PM
Personal Settings
EN
Wallpaper
This feature allows you to select the wallpaper to be displayed in stand-by mode. There are 6
wallpapers
pre-installed on your handset. The 6th wallpaper is a blank wallpaper.
To set wallpaper
1.
2.
Press mMENU, scroll : to Personal Set and press mSELECT, scroll : to Wallpaper and press mSELECT.
Scroll : to your desired wallpaper and press mSELECT to confirm.
A validation tone is emitted and the screen returns to previous menu.
Contrast level
There are 3 contrast level options (Level 1, Level 2 or Level 3). The default contrast level is
Level 2.
To set contrast level
1.
2.
Press mMENU, scroll : to Personal Set and press mSELECT, scroll : to Contrast and press mSELECT.
Scroll : to your desired contrast level (Level 1, Level 2 or Level 3) and press mSELECT to confirm.
A validation tone is emitted and the screen returns to previous menu.
Handset Name
You can name the handset and display the handset name in stand-by mode. The default handset
name of your handset is PHILIPS.
19
ID9370_IFU_EN_US.book Page 20
Tuesday, February 13, 2007
12:48 PM
Personal Settings
EN
To rename the handset
1.
2.
Press mMENU, scroll : to Personal Set and press mSELECT, scroll : to Handset
Name and press mSELECT.
Edit the handset name and press mOK to confirm.
A validation tone is emitted and the screen returns to previous menu.
Maximum length of the handset name is 14 characters and the default handset name
is PHILIPS.
Language
See page 10.
Babysit mode
You must have at least 2 handsets registered to your base station to be able to use this feature
(see page 10 "Registration").
This feature allows you to monitor, e.g. the baby’s room. Place the handset in the room to be
monitored. If the sound level around the microphone of the handset exceeds a certain threshold, the handset can automatically call another handset registered on the same base station.
To use the Babysit feature you need to activate it (e.g. on handset 1) and enter the number of
the handset to be called (e.g. handset 2) in the event that there are noises in the monitored
room. Place the handset which is in Babysit mode (e.g. handset 1) in the room to be monitored.
If this handset detects a sound level greater than a certain threshold, it will automatically initiate
an internal call to the selected handset (e.g. handset 2).
To activate Babysit mode
1.
Press mMENU, scroll : to Personal Set and press
mode and press mSELECT.
mSELECT, scroll : to Babysit
In Babysit mode, all keys are deactivated except for mMENU key. Babysit mode is
displayed on the screen when this function is activated and the handset cannot perform any normal operation (making an outgoing call, receiving an incoming call, intercom another handset, paging, etc.)
2.
Scroll through the list of handsets available and press mSELECT to select the handset to
be called.
You can still perform all normal operations (making an outgoing call, receiving an
incoming call, intercom another handset, paging, etc.) on the selected handset.
20
ID9370_IFU_EN_US.book Page 21
Tuesday, February 13, 2007
12:48 PM
Personal Settings
EN
To deactivate Babysit mode
1.
Press mMENU, select Off and press mSELECT.
Backlight time
To set Backlight time
1.
2.
Press mMENU, scroll : to Personal Set and press mSELECT, scroll
light Time and press mSELECT.
Select 20s, 40s and 60s and press mSELECT to confirm.
A validation tone is emitted.
: to Back-
Backlight is activated when there is an incoming call, new message, etc. The default
backlight time is 20s.
Theme Colour
To set theme colour
1.
2.
Press mMENU, scroll : to Personal Set and press mSELECT, scroll : to Theme
Colour and press mSELECT.
Scroll : to Theme Colour 1, Theme Colour 2 or Theme Colour 3 and press mSELECT to confirm.
A validation tone is emitted.
21
ID9370_IFU_EN_US.book Page 22
Tuesday, February 13, 2007
12:48 PM
Advanced Settings
EN
Advanced Set
Registration
Unregistration
Registration
See page 10.
Unregistration
To unregister a handset
1.
2.
3.
Press mMENU, scroll : to Advanced Set and press mSELECT, scroll : to Unregistration and press mSELECT.
Enter the Master PIN when prompted and press mOK to confirm.
Select in the list of handsets displayed, the handset that you wish to unregister.
A validation tone is emitted to indicate successful unregistration and the screen shows
Unregistered.
If no action is taken on the handset within 15 seconds, the unregistration procedure
will be aborted and the handset returns to stand-by mode.
22
ID9370_IFU_EN_US.book Page 23
Tuesday, February 13, 2007
12:48 PM
Games
EN
Games
Memory
Puzzle
Tetris
Memory
The objective of this game is to find and match different pairs of graphics in the shortest possible
time using your memory. To win, you have to complete matching all 8 pairs of graphics in a 4x4
matrix.
To start the game
1.
2.
Press mMENU, scroll : to Games and press mSELECT, press mSELECT to enter
Memory game.
An instruction screen is displayed.
Press 2 / 4 / 6 / 8 keys to move up / left / right / down respectively.
Press 5 to select.
3.
4.
Press mSELECT to start the game.
To exit from the game, press >.
Puzzle
This is a picture game where you have to move around small pieces of jumbled up pictures and
put them together in order to form a complete picture.
To start the game
1.
2.
Press mMENU, scroll : to Games and press
press mSELECT.
An instruction screen is displayed.
Press 2 / 4 /
down respectively.
3.
4.
mSELECT, scroll : to Puzzle and
6 / 8 keys to move up / move left / move right / move
Press mSELECT to start the game.
To exit from the game, press >.
23
ID9370_IFU_EN_US.book Page 24
Tuesday, February 13, 2007
12:48 PM
Games
EN
Tetris
You can rotate each shaped block as they fall such that they fit neatly into horizontal blocks. The
more blocks you can gather within the same level, the more you will score.
To start the game
1.
2.
Press mMENU, scroll : to Games and press
press mSELECT.
An instruction screen is displayed.
mSELECT, scroll : to Tetris and
Press 2 / 4 / 6 / 8 keys to rotate / move left / move right / move down
respectively.
3.
4.
24
Press mSELECT to start the game.
To exit from the game, press >.
ID9370_IFU_EN_US.book Page 25
Tuesday, February 13, 2007
12:48 PM
Troubleshooting
EN
Troubleshooting of the phone
Please refer to the following website for more information on Philips web support:
www.philips.com/support
Problem
Causes
Solution
The
icon is not
blinking when the handset
is placed on the base
• Bad battery contact
• Dirty contact
• Move the handset
slightly
• Clean the battery contact with a cloth moistened with alcohol
• No need to charge
• Battery is full
No dialling tone
• No power
• Batteries are empty
• You are too far from
the base station
• Wrong line cable
• Line adaptor (when
needed) is not connected to the line cord
Poor audio quality
The
icon is blinking
• Check the connections. Reset the phone:
unplug and plug back in
the mains
• Charge the batteries for
at least 24 hours
• Move closer to the
base station
• Use the line cable provided
• Connect the line adaptor (when needed) to
the line cord
• You are too far from
the base station
• The base station is too
close
to
electrical
appliances, reinforced
concrete walls or metal
doorframes
• Move closer to the
base station
• Handset is not registered to the base station
• You are too far from
the base station
• Register the handset to
the base station
• Move closer to the
base station
• Move the base station
at least one metre away
from any electrical
appliances
25
ID9370_IFU_EN_US.book Page 26
Tuesday, February 13, 2007
12:48 PM
Troubleshooting
EN
Problem
Causes
Solution
The handset displays “not
available”
• The procedure to add a
handset has failed
• When attempting to
add another handset to
the base station
• When using a handset
• Maximum number of
handsets has been
reached
• Try again by disconnecting and connecting
the base station power
supply and follow the
procedure to register a
handset (see page 10)
• Remove and place back
the handset batteries
• Base station is already
busy with another
handset
• Unregister a handset so
as to register the new
handset
• Wait until it is available
Noise interference on your
radio or television
Your base station or mains
power pack are too close
to electrical appliances
Move the power pack or
base station as far away as
possible
Caller Line Identification
(CLI) service does not
work
The service is not activated
Check your subscription
with
your
network
operator
No ring tone
The
ring
deactivated
Increase the volume
A phonebook entry cannot
be stored
The phonebook is full
26
tone
is
Delete an entry to free
memory
ID9370_IFU_EN_US.book Page 27
Tuesday, February 13, 2007
12:48 PM
Information
EN
Electric, Magnetic and
Electromagnetic Fields ("EMF")
1.
2.
3.
4.
5.
Philips Royal Electronics manufactures and sells many consumer oriented products which
usually, as with any electronic apparatus, have the ability to emit and receive electro
magnetic signals.
One of Philips' leading Business Principles is to take all necessary health and safety
precautions for our products, to comply with all applicable legal requirements and to stay
well within the EMF standards applicable at the time of producing the products.
Philips is committed to develop, produce and market products that cause no adverse
health effects.
Philips confirms that if its products are handled properly for their intended use, they are
safe to use according to scientific evidence available today.
Philips plays an active role in the development of international EMF and safety standards,
enabling Philips to anticipate further developments in standardisation for early integration
in its products.
Conformity
The Declaration of conformity is available on www.p4c.philips.com.
Hereby, Philips Consumer Electronics, BLC P&ACC, declares that the ID9370x is in compliance
with the essential requirements and other relevant provisions of Directive 1999/5/EC.
Important Information
NOTICE: This product meets the applicable Industry Canada technical specifications.
The equipment must be installed using an acceptable method of connection. The customer
should be aware that compliance with the above conditions may not prevent degradation of
service in some situations.
Repairs to certified equipment should be made by an authorized Canadian maintenance facility
designated by the supplier. Any repairs or alterations made by the user to this equipment, or
equipment malfunctions, may give the telecommunications company cause to request the user
to disconnect the equipment.
Users should ensure for their own protection that the electrical ground connections of the
power utility, telephone lines and internal metallic water pipe systems, if present, are connected
together. This precaution may be particularly important in rural areas.
CAUTION: Users should not attempt to make such connections themselves, but should
contact the appropriate electric inspection authority, or electrician, as appropriate.
NOTES: This equipment may not be used on coin service provided by the telephone company.
27
ID9370_IFU_EN_US.book Page 28
Tuesday, February 13, 2007
12:48 PM
Information
EN
Recycle your batteries
Do not dispose your rechargeable batteries. Call the toll fee number 1-800-822-8837 to get
instructions on how to recycle your batteries.
The RBRC® Seal on the nickel metal hydride battery indicates that Philips
Royal Electronics is voluntarily participating in an industry program to collect
and recycle these batteries at the end of their useful lives, when taken out
of service within the United States and Canada.
The RBRC® program provides a convenient alternative to placing used
nickel metal hydride batteries into the trash or municipal waste, which may
be illegal in your area.
Philips’s participation in RBRC® makes it easy for you to drop off the spent battery at local
retailers participating in the RBRC® program or at authorized Philips product service centers.
Please call 1-800-8-BATTERY for information on Ni-MH battery recycling and disposal bans/
restrictions in your area. Philips’s involvement in this program is part of its commitment to
protecting our environment and conserving natural resources.
RBRC® is a registered trademark of Rechargeable Battery Recycling Corporation.
Service Centers
Call Center (USA and Canada): 800-233-8413
E-mail support: accessories.support@philips.com
28
ID9370_IFU_EN_US.book Page 29
Tuesday, February 13, 2007
12:48 PM
Index
Accessories 11
Babysit mode 20
Backlight time 21
Battery level 14
Battery life and range 14
Charge battery 14
Conference call 16
Conformity 27
Contrast 19
Group Melody 18
Handset Name 19
Handset Tones 17
Handset keys 13
Install battery 14
Intercom 15
Key Beep 18
Language 10
Low battery warning 14
Memory 23
Noise interference 26
Out of range 14
Overview of the handset 12
EN
Personalise 17
Recall Time 22
Recycle your batteries 28
Registration 10
Ring Melody 17
Ring Volume 17
Tetris 23
Theme Colour 21
Transfer an external call 15
Unregister 22
Wallpaper 19
29
ΣΕ430_ΙΦΥ_ΕΝ.βοοκ Παγε 3 Φριδαψ, ∆εχεµβερ 16, 2005 1:15 ΠΜ
Specifications are subject to change without notice.
Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners.
2006 © Koninklijke Philips Electronics N.V. All rights reserved.
www.philips.com
3111 285 37761

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print
Modify Date                     : 2007:03:16 14:36:02+08:00
Create Date                     : 2007:03:16 14:35:33+08:00
Title                           : ID9370_IFU_EN_US.book
Author                          : janice
Creator                         : PScript5.dll Version 5.2
Producer                        : Acrobat Distiller 5.0 (Windows)
Page Count                      : 25
Mod Date                        : 2007:03:16 14:36:02+08:00
Creation Date                   : 2007:03:16 14:35:33+08:00
Metadata Date                   : 2007:03:16 14:36:02+08:00

EXIF Metadata provided by EXIF.tools