PHILIPS Consumer Electronics SBCSC769-90 Baby Unit of RF Baby Monitor System User Manual User Manaul

Download:
Mirror Download [FCC.gov]
Document ID	289759
Application ID	3ggtTpfXHgIXuj8C/PS09w==
Document Description	User Manaul
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	121.53kB (1519148 bits)
Date Submitted	2002-12-13 00:00:00
Date Available	2002-12-13 00:00:00
Creation Date	2002-11-28 17:40:06
Producing Software	Acrobat 4.0 Scan Plug-in for Windows
Document Lastmod	2002-11-28 17:40:58
Document Title	User Manaul
Document Creator	Acrobat 4.0 Scan Plug-in for Windows

PHILIPS
CONTENTS
Your baby monitor
important Information .
Getting your baby monitor read
Using your baby monitor
Features expianatio
Using batteries
Technical Specification
Problem Solving ...................................
xomxiosu-i-nwru
SOMMAIRE
Votre bahyphone .......
Information important
Comment preparer votre babyphone A
Comment utiliser votre babypbone .....
Explication des fonctions
Comment utiliser Ies piles
Caractéristiques techniques
Résolution des problemes ...........
[2
l3
I4
IS
|NDICE
Su monitor de Bebé ............................................ 22
lnformacién importante
Preparar eI Monitor de Bebé para el us
Usar su Monitor cle Bebe ..........................
Explicacién de dispositivos
Usar pilas .......................
Especificaciones Técnicas
Resolver Problemas .............
Product illustration on
inside flap:
Your baby monitor
SBC SC769
PhlllpS is dedicated to producing caring, reliable products that new moms
and dads really need. Products whose reliability and operating quality bring
reassuranceYou can trust this Philips baby monitor to provide round—the-
cIocl< support by ensuring you can always hear your baby clearly, no matter
where you are in the house.
Baby unit
night light
power light
power button
microphone
battery compartment cover
channel selection switch
DC power supply socket
AC power adapter
mummpwma>
LCD display
((< n)
F in
Baby room
temperature
10
11
12
13
14
15
16
17
18
19
20
21
Parent unit
LCD display
power light
loudspeaker
charging base
charging light
sound-level lights _
volume control - on/ofi switch
system check light
channel selection switch
battery compartment cover
DC power supply socket
AC power adapter
Signal strength
Battery status
1:16
ENGLISH
Please read this guide carefully before using the baby monitor, and keep it
for future referenceThis baby monitor is intended as an aid. it is not a
substitute for responsible and proper adult supervision and should not be
used as such.
This product is not intended to be used as a medical monitor.
Check your child’s activity at regular intervals as this monitor does not
detect silent activity.
Do not immerse any part of the Baby Monitor in water or expose it to
moisture. Never use near a bathtub, wash basin, kitchen sink, wet
basement, swimming pool, etc.
To prevent entanglement never place the Baby Monitor in the crib or
playpen or within the reach of the baby. Keep all units and power cords
out of reach of children.This monitor is not a toy.
Ensure that the units are properly ventilated. Never cover the units and
do not place them on a rug, bed, sofa or similar surface that may prevent
proper ventilation.
Do not use your monitor near a source of heat such as a. radiator, stove,
TV or other appliances that produce heat.
Never remove the covers of the units.There are no user-serviceable
parts inside.This product should only be serviced by qualified service
personnel.
Do not use this Baby Monitor if:
- the AC power adapter or its cord is damaged;
- the units have been exposed to liquid; or
- the units have been dropped or damaged.
Operate the Baby Monitor only with the AC power adapters supplied.
Use theAC power adapters only with standard household electrical
outlets (I20 voltAC / 60 Hz).
Do not defeat the purpose of the polarized plug on the AC power
adapter. Never tamper with the plug.
Route the power cord so that it is not walked on or pinched by items
placed on it.
Unplug the AC power adapters from the power outlets if the units are
not to be used for a long period of time.
Use rechargeable NiMH battery—pack only for the Parent unit, Do not
use any other type of battery.
4 ENGLISH
1 Position the Baby unit at least 1 yard away from your baby.
Never place the baby unit inSide the baby’s bed or playpen.
‘ 2 Set channel selection switches to the same channel on both units.
3 Connect the power adapter to Baby unit socket.
4 Plug the power adapter into a utility outlet.
5 Move away from the Baby unit with the Parent unit.
if units are postioned too close to each other then a high~pitched noise
can be heard. ’\
6 Connect the second power adapter to the Parent unit's charging base
socket.
l V 7 Plug the second power adapter into a utility outlet.
. 8 Place the Parent unit inside its charging base.
f‘ l 7 >The red charginglight lights,
9 Leave the Parent unit in charging base for at least I4 hours to fully
charge the batteries.
When batteries are fully charged, the Parent unit can be used cordlessly for
up to 8 hours.
10 Place the Parent unit inside the charging base when power light on the
Parent unit flashes red (an indication that batteries are low), or when
the battery-status icon on your LCD display indicates a low battery.
Eli” W”
MB
ENGLISH 5
Listening to your baby
Push the power button on the Baby unit to turn it on.
>The green POWER light lights.
Switch the Parent unit on and adjust the volume to level you prefer using
the VOLUME ON/OFF control. “l
The digital SYSTEM CHECK light lights continuously (green) when the
Parent unit and Baby unit are in touch with each other.
Checking the temperature of your baby’s room
Read the temperature of the baby’s room on the LCD display of the
Parent unit.
The baby monitor constantly measures the temperature in the baby's
room and shows this on the LCD display.
> When the tempemture in the baby's room is below 4l degrees
Fahrenheit the display shows L0 to warn you that it is too cold.
>When the temperature in the baby’s room is above l I3 degrees
Fahrenheit, the display shows Hi to warn you it is too hot
Checking the communication link
The signal strength icon pulses to indicate that the communication link is
reliable
The signal strength icon and the temperature display both flash ifthe
communicaton link is not reliable,
Checking the battery status
The battery is fully charged when all three blocks inside the battery icon
are black.
When two blocks are empty, the battery needs recharging.
é
ENGLISH
lliliv‘;
‘ The baby monitor has an operating range of up to 600ft, in ideal open-air
- . - ~ - . . .
Avoiding interference
if there is interference or if sound reception is poor, switch both units to
another channel.
Always make sure that the channel selection switches on both units are set
to the same position.
Monitoring baby silently
Adjust the volume on the Parent unit to the lowest level using the
VOLUME ON/OFF control (do not switch off).
> the sound-level lights visually alert you to baby‘s sounds.
The more sound your baby makes, the more lights light.
Checking that the units are in touch
Check that the digital SYSTEM CHECK light on the Parent unit lights
continuously (green) to confirm that the connection between both units
is reliable.
If the light flashes. move the Parent unit closer to the Baby unit
The light flashes if the uniu are out of range for more than 30 seconds or
ii’ there is interferenceThe signal strength icon and the temperature on the
LCD display also flash if the units are out of range for more than 30
seconds or if there is interference.
Switching on the system check alarm .
You can switch on the system check alarm on the Parent unit that beeps
when the units are not in touchThe Parent unit is delivered with the
system check alarm switched off.
Open the Parent unit's battery compartment cover.
Set the switch inside compartment to the ON position ( Q )
Close battery compartment cover.
The SYSTEM CHECK light can still flash even ifthe system check alarm is
switched off
Switching on the night light
Push the Baby unit night light to switch it on and off.
> Switch off the night light when operating the Baby unit on batteries to
COl’lSEl‘VE pOWEI’I
Range 600 ft. in open air
conditionsThis means that the units can see each other with no obstacles, , y
in between.WaIls. ceilings. large objects and even glass affect the operating ' '
rangeThe more obstacles there are in between. the shorter the operating .
range.
ENGLISH 7
Operating the Baby unit cordlessly
Remove the battery compartment cover.
Insert four |.5V, LR6 (AA) Alkaline batteries noting the + and -
configuration inside the battery compartment.
Batteries not included; we recommend non~chargeab|e PhlllPS Alkaline
batteries
Put the cover hack in place and secure.
> lithe red POWER light flashes install new batteries.
The unit operates for up to 30 hours on batteries
Replacing the Parent unit’s battery pack
Open the Parent unit's battery compartment cover.
Disconnect the old battery pack from the power plug and remove;
Carefully connect the new battery pack to the power plug and place ,
inside the battery compartment
Close battery compartment cover.
Disposal of batteries
Dispose of used batteries in an environmentally friendly mannei:
Do not mix old and new batteries
Do not mix difierent types of batteries, ,
Remove Baby unit batteries ifthe baby monitor won‘t be used for ion'g ,'
periods.
ENGLISH
Battery pack; rechargeab‘e NiMH For" Parent umt (included):
Optwona‘ batteries 4 x |.5V:AA a‘kaline (or Baby unit (not included):
AC power adapter 420V AC. so Hz (two included): - Output vcwtage av DC ZOOmA.
Only use the AC power adapter mcluded or a type that complies with safety standard ENGO‘PSO
and that has the followmg specrfication: mput ‘ZOV AC, 60 Hz; output 9 V0" DC / EDOmA.
up to 600 R. m ideal condm‘ons (warls‘ floors, etc, can limit this dwstance.)
50°Fto IO4°F
Confinuous communication link (hwdden signa\ helps reduce interference and ensures a
continuous an between both uniks so you omy hearyour babys sounds).
SEC SC769/23‘ Channe‘A‘ 906.3 MHZ
Channel B' 907.| MHZ
Possible cause
Parent unit: unit is not turned on.
ENGLISH
Solution
Turn VOLUME ON/OFF control
downwards.
Batteries are low.
Recharge batteries.
Baby unit: unit is not turned on.
Push power button.
Power adapter is not plugged in or
batteries are exhausted
Units are too close together
Plug in power adapter or replace
batteries.
Move parent unit away from baby
unit, Turn VOLUME ON/OFF
control on parent unit upwards.
Battery life is at an end.
Volume on parent unit is set too
low.
Batteries are low or empty.
Mobile or cordless phones too close
to the baby monitor.
Both systems are operating on the
same frequency
Units are out of range or there is
interference from another FM
source.
Batteries are almost empty.
Batteries are half empty.
Baby room temperature below 41°F.
Connect charging base to utility
power. Replace battery pack.
Turn VOLUME ON/OFF control
downwards.
Parent unit- recharge battery pack
Baby unitu replace batteries or
connect to utility power.
Move phones away from the units.
Switch channels.
Move unite. closer together to
restore the link Remove the other
FM source.
Place Parent unit in charging base.
Recharge batteries within 4 hours.
Check baby room temperature.
Baby room temperature above
I I3°F
Check baby room temperature.
‘IO ENGLISH
Warning: Changes or modifications to this unit not expressly approved by the
party responsible for compliance could void the user's authority to operate the
equipment.
NOTEzThis equipment has been tested and found to comply with the limits for a
Class 8 digital device, pursuant to Part I5 of the FCC Rules.These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
' Increase the separation between the equipment and receiven
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced radio TV technician for help.
UL approved AC power adapter
One Year Limited Warranty
Garantl’a Limitada de Un Afio
Garantie limitée a un an
6 month guarantee on rechargeable batteries
6 meses de garantia pan |as pilas recargables
6 mois de garantie sur les piles rechargeab‘es
Approved UL AC Adapter UL
®
Phifips Consumer Electronics Company
Knoxville, TN 37914-1810
FCC ID: OYMSBCSCTBQ-QO
FCC ID: OYMSBGCS769-91
Printed in China
www.phi| ipscom
This document rs pnnted on ch‘orine free produced paper.
Specifications and design are subject to change without notice.
Printed in Chiné

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Modify Date                     : 2002:11:28 17:40:58+08:00
Create Date                     : 2002:11:28 17:40:06+08:00
Creator                         : Acrobat 4.0 Scan Plug-in for Windows
Producer                        : Acrobat 4.0 Scan Plug-in for Windows
Page Count                      : 13

EXIF Metadata provided by EXIF.tools