PIN GENIE LOCKLY SMARTPGH200DS Door Frame Sensor, Wireless Door Sensor User Manual PGH200 EB 190227 V0 6
Pin Genie Inc Door Frame Sensor, Wireless Door Sensor PGH200 EB 190227 V0 6
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 4208807 |
| Application ID | U/22U9iioBYWxe2MBwfBeQ== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 185.12kB (2313963 bits) |
| Date Submitted | 2019-03-20 00:00:00 |
| Date Available | 2019-03-20 00:00:00 |
| Creation Date | 2019-02-27 18:16:43 |
| Producing Software | Adobe PDF library 15.00 |
| Document Lastmod | 2019-02-27 18:16:43 |
| Document Title | PGH200-EB-190227-V0.6 |
| Document Creator | Adobe Illustrator CC 2015.3 (Windows) |
REV: 0.1 2915C Designed：Ou 445C Date：2019-02-27 PGH200 Installation & User Manual PART A Secure Link Wi-Fi Hub PART B LED Indicator Door Sensor Door Frame Sensor USB 5V 1A AC Adaptor* Wireless Door Sensor The Lockly™ Secure Link Wi-Fi Hub comes in two parts. Each part of the Secure Link is crucial to enable voice assistant features and live monitoring and control of your Lockly™ device. The Wireless Door Sensor is optional but highly recommended as they provide the ability to verify that your door is securely closed and not ajar. *You may plug the USB Secure Link Wi-Fi Hub into any UL Certified 5V 1A USB outlet, however we recommend using ours for best performance. 1. Setting up the Secure Link Wi-Fi Hub You should install the Secure Link Wi-Fi Hub after you have successfully finished installation and set up of your Lockly™ Smart Lock. Refer to your appropriate Lockly™ Smart Lock Installation Guide and User Manual that came with the lock for reference. The Secure Link Wi-Fi Hub (Part A) can be plugged into any standard 5V 1A USB port or use the UL certified USB AC adapter included in this box (recommended). For best connectivity, the Secure Link Wi-Fi Hub must be installed within 10 feet of your Lockly™ Smart Lock. You may experience delayed or intermittent connectivity if the Secure Link Wi-Fi Hub is installed further than 10 feet away from the Lockly™ Smart Lock. 10 Feet Distance Between Lockly™ Smart Lock Secure Link Wi-Fi Hub PGD728 Series Shown as reference only Part A Shown Above as reference only The Secure Link requires a strong wireless signal for optimal performance. Make sure the Secure Link will be installed in a location with a strong 2.4 Ghz wireless signal. Plug the Secure Link Wi-Fi Hub into the 5V 1A USB AC adapter and plug the AC adapter to your wall socket. A red LED indicator light will flash slowly to indicate that the Wi-Fi Hub is ready to connect. USA Outlet Shown LED Indicator is located next to the Setup Button Once you have confirmed that your Secure Link Wi-Fi Hub is ready to connect to your lock, open the Lockly™ app to get started. In case you have not downloaded our app, you can scan the QR code to the left or visit https://lockly.com/app Make sure you have already created an account and setup your Lockly device to the Lockly app to continue. Before you continue the Secure Link Wi-Fi Hub set up on your app, proceed to the next page to learn more about using the Secure Link Wi-Fi Hub and best practices for connectivity. 2. Using the Secure Link Wi-Fi Hub Before you set up your Wi-Fi Hub, make sure you are standing in between your Lockly Smart Lock and Secure Link Wi-Fi Hub. For best connection, the distance between the Wi-Fi Hub and your smart lock should be 10 feet or less. Lockly™ Smart Lock You Secure Link Wi-Fi Hub PGD728 Series Shown as reference only Using an iOS or Android Device with Bluetooth & Wi-Fi enabled Part A Shown Above as reference only 10 Feet Distance Between In order for your Secure Link Wi-Fi Hub to connect to the internet, you must have a Wi-Fi network with a radio signal emitting 2.4 GHz. All modern Wi-Fi devices support 2.4 GHz connections while some equipment supports both 2.4 GHz and 5 GHz. Please check with your network administrator or internet provider if you’re unsure what kind of network you have. Proceed to the next page to read how to finish set up of your Wi-Fi Hub. Secure Link Installation Checklist. I’m excited for my new Lockly smart lock, now compatible with Alexa and Google Assistant.* You have a Lockly Smart Lock already, and now adding the Wi-Fi Hub The Secure Link Wi-Fi Hub is installed within 10 feet of your Lockly Smart Lock You have the Lockly App installed on your iOS or Android device. Your smartphone Bluetooth connection is ON and connected to your Lockly device. You are standing between your smart lock and the Secure Link Wi-Fi Hub. Your Secure Link Wi-Fi Hub is located in a location with a strong Wi-Fi signal. You are currently connected to a 2.4 GHz Wi-Fi Network (802.11 B/G/N) on your iOS or Android device. Be sure you check off the above 6 boxes before proceeding. If any of the boxes are not checked, you may experience intermittent or delayed response time in notifications. *Requires successful installation of the Secure Link Wi-Fi Hub and connected to a strong internet connection 3. Configuring Your Secure Link Wi-Fi Hub First, make sure the smartphone you are using to add the Wi-Fi Hub is connected to your 2.4 GHz Wi-Fi Network. Next, open your Lockly App and select the main menu from the upper left corner. (Image shown with iOS demo). Once the menu opens go ahead select “Set up a New Device” Select the Secure Link Wi-Fi Hub on the bottom NEXT > If you have never connected the Secure Link Wi-Fi Hub to your smart lock, the Secure Link should have a slow flashing RED LED Indicator. Press and hold the Setup Button located on the top of the Wi-Fi Hub for 3 seconds until you see the RED LED Indicator start to rapidly flash. Press and Hold 3 Seconds If you don’t see anything appear with a Bluetooth icon and a name starting with PGH200... simply click the Refresh button on the upper right to rescan. Make sure your Wi-Fi Hub is showing a flashing RED LED indicator and the Wi-Fi Hub is within the optimal distance of 10 feet from your lock. Select the desired Wi-Fi Hub to continue. Refresh Minimum 2-3 Bars Recommended If you are already connected to a 2.4 Ghz compatible Wi-Fi network, it should display the network name. (See example below) Enter your Wi-Fi password in the next line next to the icon, then click “Next Step” to continue. Select if your Wi-Fi Hub LED Indicator light is ON and solid. Select if your Wi-Fi Hub LED Indicator light is ON and still flashing after 2-3 minutes. Congratulations! Your Secure Link Wi-Fi Hub is now set up. Below are some quick information for troubleshooting. No Indicator Light Your Wi-Fi Hub has no power. Check your the power supply. Slow Flashing Indicator Light Your Wi-Fi Hub has power. It’s not connected to any wireless network. Rapid Flashing Indicator Light Your Wi-Fi Hub is in setup mode. Setup mode can be entered by pressing the setup button for 2 seconds. Setup mode will last approx 2 minutes. Solid Indicator Light Your Wi-Fi Hub is on and connected to an active 2.4 Ghz wireless network. 4. Adding the Door Sensor Adding the door sensor (Part B) is optional, however we strongly recommend installing the Door Sensor as it provides the ability to verify that your door is securely closed and not ajar and also send push notifications to your phone on the status of your door when someone opens and closes the door. Door Sensor is required if you are intending to use Amazon Alexa or Google Home Assistant. Depending on your door orientation, your Door Sensor will be mounted different ways. The Door Sensor comes in two parts. Part 1 - Door Frame Sensor Part 2 - Door Sensor Make sure you install the Door Sensor indoors on a clean and dry surface. Gently wipe the surface of your door and door frame where you wish to install the Door Sensor and make sure it’s dry before installing. NEXT > Keep the Door Sensor away from direct sunlight, high heat locations and large metal objects that may interfere with wireless signals. KEEP AWAY The optimal location to install the Door Sensor is on the upper corners of your door, away from the reach of children and pets. WHEN FACING YOUR DOOR FROM THE INSIDE, DOOR HINGES ARE ON THE RIGHT SIDE Door Frame Sensor Door Frame Door Sensor Door WHEN FACING YOUR DOOR FROM THE INSIDE, DOOR HINGES ARE ON THE LEFT SIDE Door Sensor Door Door Frame Sensor Door Frame DON’T INSTALL SENSOR YET. NEXT > When you are installing the Door Sensor, make sure the arrows on the Door Sensor is placed next to the arrow from the Door Frame Sensor. OR When installed on your door, the distance between the Door Sensor and the Door Frame Sensor must be less than 3/4” in order for the sensor to work. Gap - less than 3/4” when installed. When you are ready to install, pull the plastic tab at the back of the Door Frame Sensor to activate the sensor. Peel back the protective paper on the double sided tape to exposive the adhesive and apply securely to your door and door frame. Follow the On-Screen instructions on the app to test your Door Sensor. NEXT > Congratulations! The Door Sensor is now set up. The Secure Link Wi-Fi Hub works with other Smart Home devices. Check on the status or remote lock and unlock your door by your voice using Amazon Alexa or Google Home Assistant. To setup your lock to work with either of those platforms, download the Amazon Alexa or Google Home Assistant app and add a new skill with Amazon Alexa or an Action with Google Home Assistant. Add the “Lockly” Skill (Alexa) and Action (Google) then follow on screen instructions to finish set up. For a full list of commands, help videos or to troubleshoot your Secure Link Wi-Fi Hub visit us at https://lockly.com/help We’re here to help! help@lockly.com https://lockly.com/help Certified Warning： This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The Secure Link Wi-Fi Hub complies with FCC radiation exposure limits set forth for an uncontrolled environment. It should be installed and operated with minimum distance 20cm between the radiator and your body. WARNING: This product contains DEHP and other chemicals known to the State of California to cause cancer and birth defects,or other reproductive harm. For more information go to www.P65Warnings.ca.gov IUMPGH20027022019
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : Adobe XMP Core 5.6-c132 79.159284, 2016/04/19-13:13:40 Format : application/pdf Title : PGH200-EB-190227-V0.6 Metadata Date : 2019:02:27 18:16:43+08:00 Modify Date : 2019:02:27 18:16:43+08:00 Create Date : 2019:02:27 18:16:43+09:00 Creator Tool : Adobe Illustrator CC 2015.3 (Windows) Thumbnail Width : 256 Thumbnail Height : 228 Thumbnail Format : JPEG Thumbnail Image : (Binary data 25400 bytes, use -b option to extract) Instance ID : uuid:da35ef70-8e27-4551-a3ff-155300596a7e Document ID : xmp.did:08f5e84e-bad4-6c43-9d94-f2dcf8443920 Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:359d2779-17bc-2d4f-b61c-eb7d0d8f3e09 Derived From Document ID : xmp.did:359d2779-17bc-2d4f-b61c-eb7d0d8f3e09 Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : proof:pdf History Action : saved, saved History Instance ID : xmp.iid:56548592-a991-4936-bb44-cc646a0063c6, xmp.iid:08f5e84e-bad4-6c43-9d94-f2dcf8443920 History When : 2019:02:20 01:56:38-08:00, 2019:02:27 18:16:29+08:00 History Software Agent : Adobe Illustrator CC 22.1 (Macintosh), Adobe Illustrator CC 2015.3 (Windows) History Changed : /, / Manifest Link Form : EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference Manifest Reference File Path : Lockly_Support.png, 115005867463_GoogleHome_EN-1.png, huba.png, expor.png, setupnew.png, Lockly_App_.png, PGH200-WallPlugB.jpg, press.jpg, G3DefY.tif, left.jpg, right.jpg Ingredients File Path : Lockly_Support.png, 115005867463_GoogleHome_EN-1.png, huba.png, expor.png, setupnew.png, Lockly_App_.png, PGH200-WallPlugB.jpg, press.jpg, G3DefY.tif, left.jpg, right.jpg Startup Profile : Print Has Visible Overprint : True Has Visible Transparency : True N Pages : 1 Max Page Size W : 4.527559 Max Page Size H : 8.100088 Max Page Size Unit : Inches Font Name : Arial-ItalicMT, ArialMT, Arial-BoldMT, CenturyGothic-Bold, MyriadPro-Bold, AdobeSongStd-Light, ArialUnicodeMS Font Family : Arial, Arial, Arial, Century Gothic, Myriad Pro, Adobe 宋体 Std, Arial Unicode MS Font Face : Italic, Regular, Bold, Bold, Bold, L, Regular Font Type : Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type Font Version : Version 7.00, Version 5.01.2x, Version 7.00, Version 2.35, Version 2.102;PS 2.000;hotconv 1.0.67;makeotf.lib2.5.33168, Version 5.017;PS 5.002;hotconv 1.0.67;makeotf.lib2.5.33168, Version 1.01 Font Composite : False, False, False, False, False, False, False Font File Name : ariali.ttf, Arial_2.ttf, arialbd.ttf, GOTHICB.TTF, MyriadPro-Bold.otf, AdobeSongStd-Light.otf, ARIALUNI.TTF Plate Names : Cyan, Magenta, Yellow, Black, PANTONE 445 C, PANTONE 2915 C, Black (1) (9) Swatch Group Name : 默认色板组, Grays, Brights Swatch Group Type : 0, 0, 0 Swatch Colorant Swatch Name : White, Black, CMYK Red, CMYK Yellow, CMYK Green, CMYK Cyan, CMYK Blue, CMYK Magenta, C=15 M=100 Y=90 K=10, C=0 M=90 Y=85 K=0, C=0 M=80 Y=95 K=0, C=0 M=50 Y=100 K=0, C=0 M=35 Y=85 K=0, C=5 M=0 Y=90 K=0, C=20 M=0 Y=100 K=0, C=50 M=0 Y=100 K=0, C=75 M=0 Y=100 K=0, C=85 M=10 Y=100 K=10, C=90 M=30 Y=95 K=30, C=75 M=0 Y=75 K=0, C=80 M=10 Y=45 K=0, C=70 M=15 Y=0 K=0, C=85 M=50 Y=0 K=0, C=100 M=95 Y=5 K=0, C=100 M=100 Y=25 K=25, C=75 M=100 Y=0 K=0, C=50 M=100 Y=0 K=0, C=35 M=100 Y=35 K=10, C=10 M=100 Y=50 K=0, C=0 M=95 Y=20 K=0, C=25 M=25 Y=40 K=0, C=40 M=45 Y=50 K=5, C=50 M=50 Y=60 K=25, C=55 M=60 Y=65 K=40, C=25 M=40 Y=65 K=0, C=30 M=50 Y=75 K=10, C=35 M=60 Y=80 K=25, C=40 M=65 Y=90 K=35, C=40 M=70 Y=100 K=50, C=50 M=70 Y=80 K=70, PANTONE 445 C, PANTONE 2915 C, Black, White, Black (1) (9), C=0 M=0 Y=0 K=100, C=0 M=0 Y=0 K=90, C=0 M=0 Y=0 K=80, C=0 M=0 Y=0 K=70, C=0 M=0 Y=0 K=60, C=0 M=0 Y=0 K=50, C=0 M=0 Y=0 K=40, C=0 M=0 Y=0 K=30, C=0 M=0 Y=0 K=20, C=0 M=0 Y=0 K=10, C=0 M=0 Y=0 K=5, C=0 M=100 Y=100 K=0, C=0 M=75 Y=100 K=0, C=0 M=10 Y=95 K=0, C=85 M=10 Y=100 K=0, C=100 M=90 Y=0 K=0, C=60 M=90 Y=0 K=0 Swatch Colorant Mode : CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, Lab, Lab, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK Swatch Colorant Type : PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, SPOT, SPOT, PROCESS, PROCESS, SPOT, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS Swatch Colorant Cyan : 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 100.000000, 100.000000, 0.000000, 15.000000, 0.000000, 0.000000, 0.000000, 0.000000, 5.000000, 20.000000, 50.000000, 75.000000, 85.000000, 90.000000, 75.000000, 80.000000, 70.000000, 85.000000, 100.000000, 100.000000, 75.000000, 50.000000, 35.000000, 10.000000, 0.000000, 25.000000, 40.000000, 50.000000, 55.000000, 25.000000, 30.000000, 35.000000, 40.000000, 40.000000, 50.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 85.000000, 100.000000, 60.000000 Swatch Colorant Magenta : 0.000000, 0.000000, 100.000000, 0.000000, 0.000000, 0.000000, 100.000000, 100.000000, 100.000000, 90.000000, 80.000000, 50.000000, 35.000000, 0.000000, 0.000000, 0.000000, 0.000000, 10.000000, 30.000000, 0.000000, 10.000000, 15.000000, 50.000000, 95.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 95.000000, 25.000000, 45.000000, 50.000000, 60.000000, 40.000000, 50.000000, 60.000000, 65.000000, 70.000000, 70.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 75.000000, 10.000000, 10.000000, 90.000000, 90.000000 Swatch Colorant Yellow : 0.000000, 0.000000, 100.000000, 100.000000, 100.000000, 0.000000, 0.000000, 0.000000, 90.000000, 85.000000, 95.000000, 100.000000, 85.000000, 90.000000, 100.000000, 100.000000, 100.000000, 100.000000, 95.000000, 75.000000, 45.000000, 0.000000, 0.000000, 5.000000, 25.000000, 0.000000, 0.000000, 35.000000, 50.000000, 20.000000, 40.000000, 50.000000, 60.000000, 65.000000, 65.000000, 75.000000, 80.000000, 90.000000, 100.000000, 80.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 100.000000, 95.000000, 100.000000, 0.000000, 0.003100 Swatch Colorant Black : 0.000000, 100.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 10.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 10.000000, 30.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 25.000000, 0.000000, 0.000000, 10.000000, 0.000000, 0.000000, 0.000000, 5.000000, 25.000000, 40.000000, 0.000000, 10.000000, 25.000000, 35.000000, 50.000000, 70.000000, 100.000000, 0.000000, 100.000000, 100.000000, 89.999400, 79.998800, 69.999700, 59.999100, 50.000000, 39.999400, 29.998800, 19.999700, 9.999100, 4.998800, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.003100 Swatch Colorant Tint : 100.000000, 100.000000, 100.000000, 100.000000, 100.000000 Swatch Colorant L : 36.470600, 69.411797 Swatch Colorant A : -4, -16 Swatch Colorant B : -2, -33 Producer : Adobe PDF library 15.00 Page Count : 15 Creator : Adobe Illustrator CC 2015.3 (Windows)EXIF Metadata provided by EXIF.tools