PIONEER Plasma Television Manual L0511176

User Manual: PIONEER PIONEER Plasma Television Manual PIONEER Plasma Television Owner's Manual, PIONEER Plasma Television installation guides

Open the PDF directly: View PDF .
Page Count: 81

sound, vision.sou/

PLASMADISPLAYSYSTEM

SYSTEMED'ECRANPLASMA

SISTEMADEPANTALLADEPLASMA

PDP-505OHD

PDP-4350HD

PDP-5045HD

PDP-4345HD

DD_

DIGITAL

Operating Instructions

--ode d'emploi

Manual de instrucciones

i...ll_lrlrlll

IMPORTANT

The lightn ng flash wth arrowhead symbol, within an

equilateral tr angle, is intended to alert the user to the

presence of uninsulated "dangerous voltage" within the

product's enclosure that may be of sufficient magnitude

to constitute a risk of electric shock to persons.

CAUTION

CAUTION:

TO PREVE NT THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

The exclamation point within an equilateral triangle s

intended to alert the user to the presence of mportant

operating and maintenance (servicing) instructions in the

literature accompany ng the appliance.

IMPORTANT SAFETY INSTRUCTIONS

1) Read these instructions. 11)

2) Keep these instructions.

3) Heed all warnings. 12)

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in

accordance with the manufacturer's instructions.

8) Do not install near any heat sources such as

radiators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two

blades with one wider than the other. A grounding

type plug has two blades and a third grounding 13)

prong. The wide blade or the third prong are

provided for your safety. If the provided plug does 14)

not fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

10) Protect the power cord from being walked on or

pinched particularly at plugs, convenience

receptacles, and the point where they exit from the

apparatus.

Only use attachments/accessories specified by the

manufacturer.

Use only with the cart, stand, tripod, bracket, or

table specified by the manufacturer, or sold with the

apparatus. When a cart is used, use caution when

moving the cart/apparatus combination to avoid

injury from tip-over.

Unplug this apparatus during lightning storms or

when unused for long periods of time.

Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or

plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has

been exposed to rain or moisture, does not operate

normally, or has been dropped.

Note to CATV system installer.

This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides

guidelines for proper grounding and, in particular, specifies that the cable ground-shall be connected to the

grounding system of the building, as close to the point of cable entry as practical.

WARNING: THE APPARATUS IS NOT WATER-

PROOFS, TO PREVENT FIRE OR SHOCK HAZARD, DO

NOT EXPOSETHIS APPLIANCE TO RAIN OR MOISTURE

AND DO NOT PUT ANY WATER SOURCE NEAR THIS

APPARATUS, SUCH AS VASE, FLOWER POT,COSMET-

ICS CONTAINER AND MEDICINE BOTTLE ETC,

WARNING: Handling the cord on this product or

cords associated with accessories sold with the prod-

uct will expose you to lead, a chemical known to the

State of California and other governmental entities to

cause cancer and birth defects or other reproductive

harm, Wash hands after handling.

NOTE: This equipment has been tested and found to

comply with the limits for a class B digital device, pur-

suant to Part 15 of the FCC Rules, These limits are de-

signed to provide reasonable protection against harmful

interference in a residential installation, This equipment

generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio

communications, Howeve_sthere is no guarantee that

interference will not occur in a particular installation, If

this equipment does cause harmful interference to radio

or television reception, which can be determined by turn-

ing the equipment off and on, the user is encouraged to

try to correct the interference by one or more of the fol-

lowing measures:

-- Reorient or relocate the receiving antenna,

-- Increase the separation between the equipment and

receiven

-- Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected,

-- Consult the dealer or an experienced radio/TV tech-

nician for help,

CAUTION:

This product satisfies FCC regulatbns when shielded

cables and connectors are used to connect the unit to

other equipment, To prevent electromagnetic interfer-

ence with electric appliances such as radios and televi-

sions, use shielded cables and connectors for connec-

tions,

FEDERAL COMMUNICATIONS COMMISSION

DECLARATION OF CONFORMITY

This device complies with part 15 of the FCC Rules, Op-

eration is subject to the following two conditions: (1)This

device may not cause harmful interference, and (2) this

device must accept any interference received, including

interference that may cause undesired operation,

Product Name: Plasma Display System

Model Number:

(Plasma Display)

(Media Receiver)

PDP-B050HD

(PDP-505PU)

(PDP-AR05U)

PDP-5045HD

(PDP-504PU)

(PDP-R05U)

PDP-4350HD

(PDP-435PU)

(PDP-AR05U)

PDP-4345HD

(PDP-434PU)

(PDP-R05U)

Product Category: Class B Personal Computers &Periph-

erals

Responsible Party Name: PIONEER ELECTRONICS

(USA), INC,, Customer Support Div,

Address: RO, BOX 1760, LONG BEACH, CA,, 90801-1760

U,S,A,

Phone: (800) 421-1625

For Business Customer URL

http://www, PioneerUSA,com

Information to User

Alteration or modifications carried out without appro-

priate authorization may invalidate the user's right to

operate the equipment,

[For Canadian model]

This Class B digital apparatus complies with Canadian

ICES-003,

IMPORTANT NOTICE: The serial number for this

equipment is located on the rear panel, Please write this

serial number on your enclosed warranty card and keep

it in a secure area, This is for your security,

WARNING: Be sure to plug this equipment into a

grounding-type AC outlet,

B/ ",

, Contents j

Thank you for buying this Pioneer product,

Please read through these operating instructions so you will know how to operate your model properly, After you have finished

reading the instructions, put them away in a safe place for future reference,

In some countries or regions, the shape of the power plug and power outlet may sometimes differ from that shown in the explana-

tory drawings, However the method of connecting and operating the unit is the same,

01 Important User Guidance Information

02 Safety Precautions

03 Operational Precautions

04 Supplied Accessories

Plasma Display ...................................................................11

Media Receiver....................................................................11

05 Part Names

Plasma Display ...................................................................12

Media Receiver....................................................................12

Remote control unit ............................................................14

06 Preparation

Installing the Plasma Display ............................................15

Installing the Media Receiver ............................................16

Installing the Media Receiververtically ......................16

Connecting the systemcable ............................................18

Routing cables ....................................................................19

Preparingthe remotecontrol unit .....................................20

Inserting batteries.........................................................20

Cautions regarding batteries .......................................20

Allowed operation range of the remote

control unit ....................................................................20

Cautions regarding the remote control unit ..............20

Cable connections for watching digital and/or

conventional TVchannels ..................................................21

Connecting VHF/UHFantennasand a Cable

Converter .......................................................................21

Cable connections for watching digital

TV channels over air (VHF/UHF)........................................21

Connecting VHF/UHFantennas..................................21

Switching betweenantenna A and B ...............................22

Inserting the cable card .....................................................22

Connecting the powercord ...............................................23

07 Basic Operations

Turning on the power (Standby) ........................................24

Turning off the power (Standby) ........................................24

Watching TVchannels ........................................................25

Selecting the antenna ..................................................25

Changing channels ......................................................25

Changing the volume and sound ................................26

Viewing a channel banner ...........................................26

Using the PODservice .................................................27

Changing the language................................................27

Setting MTS/SAPmode ...............................................27

Usingthe multiscreen functions .......................................28

Splitting the screen ......................................................28

Freezingimages............................................................29

08 Menu Setup

Menu configuration ............................................................30

AV mode menus............................................................30

PC mode menus ...........................................................30

Menu operations .................................................................30

09 Tuner Setup

Setting upTV channels ......................................................31

Using Auto Channel Preset .........................................31

Setting for skipping unwanted channels....................31

Setting up?# channels manually ...............................31

Naming TVchannels ....................................................32

Checking signal strength .............................................32

Checking the CableCard ID ........................................32

Enablingdata acquisition ............................................32

ParentalControl ..................................................................33

Changing the password ...............................................33

Clearing the password .................................................34

Activating the Parental Control ...................................34

Setting the voluntary movie rating system

(MPAA) ..........................................................................34

Setting the TV ratings ...................................................35

Setting the TV ParentalGuidelines _V Guidelines),,, 35

Blocking Not RatedTV programs ................................35

Canadian rating systems .............................................36

Setting Canadian English ratings ...............................36

Setting Canadian Frenchratings ................................37

Temporarilydeactivating the Parental Control ...........37

Setting your favorite channels ...........................................37

Setting up closed captions ................................................37

Activating the closed caption ......................................38

Selectingthe type of conventional closed captions ,,38

Selectingdigital closed captions ................................38

Selectingdigital closed caption parameters .............38

Clock Setting .......................................................................39

Er]

, °Contents }

10 Adjustments and Settings

SleepTimer, .........................................................................40

AVSelection ........................................................................40

Picture adjustments ...........................................................41

ProAdjust ......................................................................41

Sound adjustments ............................................................42

FOCUS...........................................................................43

FrontSurround ..............................................................43

PowerControl ......................................................................43

EnergySave...................................................................43

No Signal off (AVmode only) .......................................43

No Operation off (AVmode only).................................44

PowerManagement (PC mode only) ..........................44

Adjusting image positions (AVmode only) ......................44

Adjusting image positions and clock automatically

(PCmode only) ....................................................................45

Adjusting image positions and clock manually

(PCmode only) ....................................................................45

Selecting a screensize.......................................................46

Changing the brightness at both sides of the screen

(SideMask) ..........................................................................47

Languagesetting ................................................................47

11 Timer Presetting

PresettingTV programs using the timer ...........................48

Priority rules for overlapped presettings...........................49

12 Enjoying through External Equipment

Watching a DVDimage ......................................................50

Connecting a DVDplayer.............................................50

Displaying a DVDimage ..............................................50

Watching aVCRimage ......................................................50

Connecting a VCR ........................................................50

Displaying a VCRimage...............................................50

Using HDMI Input ...............................................................51

Connecting HDMI equipment .....................................51

Enjoyinga game console or watching camcorder

images .................................................................................52

Connecting a game console or camcorder ................52

Displaying an image of the game consob or

camcorder .....................................................................52

Recordingdigital TV programs using a VCRor

DVDrecorder.......................................................................52

Avoiding unwanted feedback ......................................52

Connecting a recorder .................................................53

Connecting other audio equipment ..................................53

Connecting an AVreceiver ..........................................53

Watching a D-VHSimage ...................................................54

What is i,LINK?..............................................................54

Which i,LINKdevices are connectable?.....................54

What can berecorded through i,LINK?......................54

Connecting D-VHSrecorders ......................................54

When connecting a single D-VHSrecorder ...............54

When connecting two D-VHSrecorders.....................54

Displaying a D-VHSimage .................................................55

Useful and important notification ...............................55

Setting up for controlling a D-VHSrecorder ..............56

Editing the i,LINK list ....................................................56

Setting up for i,LINK standby.......................................57

Operating the control panelscreen ............................57

Watching an image from a personal computer ...............58

Connecting a personal computer ...............................58

Displaying an image from a personal computer .......58

Computer compatibility chart ............................................58

Connecting the VCRcontroller ..........................................59

The lists of controllable recording

equipment manufactures ............................................60

Connecting control cords ..................................................61

About SR+ ....................................................................61

13 Useful Remote Control Features

Learningfunction of the remotecontrol unit ...................62

Usingthe learning function .........................................62

Presetting manufacture codes ....................................62

Manufacture codes ......................................................63

Using the remotecontrol unit to control other

devices .................................................................................64

Receivercontrol buttons ..............................................64

Cable control buttons ...................................................65

SATcontrol buttons ......................................................66

VCRcontrol buttons .....................................................67

DVD/DVRcontrol buttons ............................................68

14 Appendix

Troubleshooting ..................................................................69

Specifications ......................................................................79

1.1

lmportant User Guidance Information j

In order to obtain maximum enjoyment from this Pioneer

PureVision PDP-5050H D/P DP-4350HD/PDP-5045H D/P DP-

4345HD Plasma Display System, please first read this

information carefully,

With the Pioneer PureVision PDP-5050HD/PDP-4350HD/PDP-

5045HD/PDP-4345HD, you can be assured of a high quality

Plasma Display System with long-life and high reliability, To

achieve images of exceptional quality, this Pioneer Plasma

Display System incorporates state-of-the-art design and

construction, as well as very precise and highly advanced

technology,

Over the course of its lifetime, the luminosity of the Pioneer

PDP-5050H D/PDP-4350H D/P DP-5045 HD/PDP-4345H D Plasma

Display System will diminish very slowly, such as with all

phosphor-based screens (for example, a traditional tube-type

television), To enjoy beautiful and bright images on your

Pioneer Plasma Display System for many years to come, please

carefully read and follow the usage guidelines below,

Usage guidelines

All phosphor-based screens (including conventional tube4ype

televisions) can be affected by displaying static images for a

prolonged period, Plasma Display Systems are no exception to

this rule, After-image and permanent effects on the screen can

be avoided by taking some basic precautions, By following the

recommendations listed below, you can ensure longer and

satisfactory results from your plasma:

• Whenever possible, avoid frequently displaying the same

image or virtually still moving pictures (e,g, closed-captioned

images or video game images which have static portions),

• Avoid viewing the On Screen Display for extended periods,

from a DVD player, VCR, and all other components,

• Do not leave the same picture freeze-framed or paused

continuously over a long period of time, when using the still

picture mode from a TV,VCR, DVD player or any other

component,

• Images which have both very bright areas and very dark

areas side by side should not be displayed for a prolonged

period of time,

• When playing a game, the "GAME" mode setting within "AV

Selection" is strongly recommended, However, please limit its

use to less than 2 hours at a time,

• After playing a game, or displaying a PC image or any still

image, it is best to view a normal moving picture in the

"WIDE" or "FULL" screen setting for over 3 times longer than

the previous stilYmoving image,

• After using the Plasma Display System, always switch the

display to "STANDBY" mode,

Installation guidelines

The Pioneer PureVision PDP-5050HD/PDP-4350HD/PDP-

5045HD/PDP-4345HD Plasma Display System incorporates a

very thin design, To ensure safety, please take the proper

measures to mount or install the Plasma Display, in order to

prevent the unit from tipping over in the event of vibration or

accidental movement,

This product should be installed by using only parts and

accessories designed by PIONEER, Use of accessories other

than the PIONEER stand or installation bracket may result in

instability, and could cause injury, For custom installation,

please consult the dealer where the unit was purchased, To

ensure correct installation, experienced and qualified experts

must install the unit, PIONEER will not be held responsible for

accident or damage caused by the use of parts and accessories

manufactured by other companies,

To avoid malfunction and overheating when installing, make

sure that the vents on the main unit are not blocked, To ensure

proper heat emission:

• Distance the unit slightly from other equipment, walls, etc,

For the minimum space required around the unit, see pages

15 to 16,

• Do not fit the unit inside narrow spaces where ventilation is

poor,

• Do not cover with a cloth, etc,

• Clean the vents on the sides and rear of the unit to remove

dust build-up by using a vacuum cleaner set to its lowest

suction setting,

• Do not place the product on a carpet or blanket,

• Do not leave the product tilted over except the case of vertical

installation of the Media Receiver,

• Do not reverse the product,

Using the unit without proper ventilation may cause the

internal temperature to rise, and could result in possible

malfunction, When the surrounding or internal temperature

exceeds a certain degree, the display will automatically power

off in order to cool the internal electronics and prevent a

hazardous occurrence,

Malfunction can be caused by many factors: inappropriate

installation site, improper assembly/installation/mounting,

improper operation of or modifications made to this product,

However, PIONEER cannot be held responsible for accidents or

malfunction caused by the above,

r_ NOTE

Typical effects and characteristics of a phosphor-based matrix

display such as permanent residual images upon the

phosphors of the panel and the existence of a minute number

of inactive light cells in the screen are not covered by local

warranties,

Erl

Important User Guidance Information

,_ CAUTION

Panel sticking and after-image lag

•Displaying tile same images such as still images for a long

time may cause after-image lagging, This may occur in the

following two cases,

1. After-image lagging due to remaining electric

load

When image patterns with very high peak lumblance are

displayed more than 1 minute, after-image lagging may occur

due to the remaining electric load, The after-images remaining

on the screen will disappear when moving images are

displayed, The time for the after-images to disappear depends

on the luminance of the still images and the time they had

been displayed,

2. After-image (lag image) due to burning

Avoid displaying tile same image on tile Plasma Display

continuously over a long period of time, If the same image is

displayed continuously for several hours, or for shorter periods

of time over several (Jays, a permanent after-image may remain

on the screen due to burning of the fluorescent materials, Such

images may become less noticeable if moving images are later

displayed, but they will not disappear completely,

• The Energy save function can be set to help prevent damage

from screen burning (see page 43),

About operations through i.LINK,

PIONEER shall not always assure normal video/audio recording

or playback when a D-VHS is operated through i,LINK,

,_CAUTION

DO NOT PLACE THIS PRODUCT ON AN UNSTABLE CART,

STAND, TRIPOD, BRACKET, OR TABLE, THE PRODUCT MAY

FALL, CAUSING SERIOUS PERSONAL INJURYAND SERIOUS

DAMAGE TO THE PRODUC]] USE ONLY WITH A CART, STAND,

TRIPOD, BRACKET, OR TABLE RECOMMENDED BYTHE

MANUFACTURER, OR SOLD WITH THE PRODUC1] FOLLOW

THE MANUFACTURE'S INSTRUCTIONS WHEN INSTALLING

THE PRODUCT AND USE MOUNTING ACCESSORIES

RECOMMENDED BYTHE MANUFACTURER,

A PRODUCT AND CART COMBINATION SHOULD BE MOVED

WITH THE CARE, QUICK STOPS, EXCESSIVE FORCE, AND

UNEVEN SURFACES MAY CAUSE THE PRODUCT AND CART

COMBINATION TO OVERTURN,

JSafety PrecautionsI/i

Electricity is used to perform many useful functions, but it can

also cause personal injudes and property damage if improperly

handled, This product has been engineered and manufactured

with the highest priority on safety, However, improper use can

result in electric shock and/or fire, In order to prevent potential

danger, please observe the following instructions when install-

ing, operating and cleaning the product, To ensure your safety

and prolong the service life of your product, please read the

following precautions carefully before using the product,

1, Read instructions--All operating instructions must be read

and understood before the product is operated,

2, Keep this manual in a safe place--These safety and

operating instructions must be kept in a safe place for

future reference,

3, Observe warnings--All warnings on the product and in the

instructions must be observed closely,

4, Follow instructions--All operating instructions must be

followed,

5, Cleaning--Unplug the power cord from the AC outlet before

cleaning the product, Use a damp cloth to clean the

product, Do not use liquid cleaners or aerosol cleaners,

6, Attachments--Do not use attachments not recommended

by the manufacturer, Use of inadequate attachments can

result in accidents,

7, Water and moisture--Do not use the product near water,

such as bathtub, washbasin, kitchen sink and laundrytub,

swimming pool and in a wet basement,

8, Stand--Do not place the product on an unstable cart,

stand, tripod or table, Placing the product on an unstable

base can cause the product to fall, resulting in serious

personal injuries as well as damage to the product, Use

only a cart, stand, tripod, bracket or table recommended by

the manufacturer or sold with the product, When mounting

the product on a wall, be sure to follow the manufacturer's

instructions, Use only the mounting hardware

recommended by the manufacturer,

9, When relocating the product placed on a cart, it must be

moved with utmost care, Sudden stops, excessive force and

uneven floor surface can cause the product to fall from the

cart,

10, Ventilation--The vents and other openings in the cabinet

are designed for ventilation, Do not cover or block these

vents and openings since insufficient ventilation can cause

overheating and/or shorten the life of the product, Do not

place the product on a bed, sofa, rug or other similar

surface, since they can block ventilation openings, This

product is not designed for built-in installation; do not place

the product in an enclosed place such as a bookcase or

rack, unless proper ventilation is provided or the

manufacturer's instructions are followed,

11, Power source--This product must operate on a power

source specified on the specification label, If you are not

sure of the type of power supply used in your home, consult

your dealer or local power company,

12, Power cord protection--The power cords must be routed

properly to prevent people from stepping on them or objects

from resting on them, Check the cords at the plugs and

product,

13,The plasma Display used in this product is made of glass,

Therefore, it can break when the product is dropped or

applied with impact, Be careful not to be injured by broken

glass pieces in case the plasma Display breaks,

14, Overloading--Do not overload AC outlets or extension

cords, Overloading can cause fire or electric shock,

15, Entering of objects and liquids--Never insert an object into

the product through vents or openings, High voltage flows

in the product, and inserting an object can cause electric

shock and/or short internal parts, For the same reason, do

not spill water or liquid on the product,

16, Servicing--Do not attempt to service the product yourself,

Removing covers can expose you to high voltage and other

dangerous conditions, Request a qualified service person to

perform servicing,

17, Repair--If any of the following conditions occurs, unplug

the power cord from the AC outlet, and request a qualified

service person to perform repairs,

a, When the power cord or plug is damaged,

b, When a liquid was spilled on the product or when

objects have fallen into the product,

c, When the product has been exposed to rain or water,

d, When the product does not operate properly as de-

scribed in the operating instructions,

Do not touch the controls other than those described in

the operating instructions, Improper adjustment of

controls not described in the instructions can cause

damage, which often requires extensive adjustment work

by a qualified technician,

e, When the product has been dropped or damaged,

f, When the product displays an abnormal condition, Any

noticeable abnormality in the product indicates that the

product needs servicing,

18, Replacement parts--In case the product needs replace-

ment parts, make sure that the service person uses

replacement parts specified by the manufacturer, or those

with the same characteristics and performance as the

original parts, Use of unauthorized parts can result in fire,

electric shock and/or other dangen

19, Safety checks--Upon completion of service or repair work,

request the service technician to perform safety checks to

ensure that the product is in proper operating condition,

20, Wall or ceiling mounting--When mounting the product on

a wall or ceiling, be sure to install the product according to

the method recommended by the manufacturer,

21, Heat sources--Keep the product away from heat sources

such as radiators, heaters, stoves and other heat- generat-

ing products (including amplifiers),

22, Unplug the power cord from the AC outlet before installing

the speakers,

23, Never expose the screen of the Plasma Display to a strong

impact, for example, by hitting it, The screen may be

broken, resulting in fire or personal injury,

24, Do not expose the Plasma Display to direct sunlight for a

long period of time, The optical characteristics of the front

protection panel changes, resulting in discoloration or

warp,

25, The Plasma Display weighs about 32,8 kg (72,3 Ibs,) for the

PDP-505PU, about 38 kg (83,8 Ibs,)for the PDP-504PU,

about 26,8 kg (59,1 Ibs,) for the PDP-435PU and about 30,5

kg (67,3 Ibs,) for the PDP-434PU, Because it has small

depth and is unstable, unpack, carry, and install the

product with one more person at least and use the handles,

Safety Precautions }

Installation Precautions

Observethe following precautions when installing with any items such as tile optional stand,

When using the optional stand, brackets, or equivalent items

•Ask your dealer to perform tile installation,

• Be sure to use the supplied bolts,

• For details, see the instruction manual that comes with the optional stand (or equivalent items),

When using other items

• Consult your dealer,

• The following six mounting holes can be used for the installation:

Rear view

Mounting hole :i-Mounting hole Median line

Side view

Plasma

Display

Mounting surface

Mounting

bracket (or

equivalent item

M8 screw

12 to 18 mm

(0,5 to 0,7 inches)

Median line

Illustration shows PDP-5045HD/4345HD,

,_k CAUTION

• Be sure to use four or more mounting holes symmetrical to the vertical and horizontal median lines,

• Use M8 screws, which go 12to 18 mm (0,5 to 0,7 inches) in depth from the mounting surface of the Plasma Display, See the side

view above,

• Be careful not to block the ventilation opening at the rear of the Plasma Display,

• Be sure to install the Plasma Display on a flat surface because it contains glass,

• The screw holes other than the above are to be used only for the specified products, Never use them for mounting non-specified

products,

• Do not mount or remove the Plasma Display to or from the stand, with speakers attached,

_'_ NOTE

• It is strongly recommended to use the optional PIONEER mounting products,

• PIONEER shall not be liable for any personal injury or product damage that results from the use of mounting items other than the

optional PIONEER products,

"Operational Precautions j,

_CAUTION

PIONEER bears no responsibility for any damages arising from

incorrect use of the product by you or other people,

malfunctions when in use, other product related problems, and

use of the product except in cases where the company must be

liable,

Plasma Display protection function

When still images (such as photos and computer images) stay

on the screen for an extended period of time, the screen will be

slightly dimmed, This is because the protection function of the

Plasma Display automatically adjusts the brightness to protect

the screen when detecting still images; so this does not

designate malfunction, The screen is dimmed when a still

image is detected for about three minutes,

Infrared rays

The Plasma Display releases infrared rays because of its

characteristics, Depending on how the Plasma Display is in

use, the remote controls of nearby equipment may be adversely

affected or wireless headphones using infrared rays are

interfered by noise, If this is the case, place that equipment at a

location where its remote control sensor is not affected,

Radio interference

While this product meets tile required specifications, it emits a

small amount of noise, If you place such equipment as an AM

radio, personal computer, and VCR close to this product, that

equipment may be interfered, If this happens, place that

equipment far enough from this product,

Fan motor noise

When ambient temperature of tile Media Receiver becomes

high, the rotation speed of the cooling fan motor increases,

This may make you feel that the fan motor is noisy at such an

occasion,

The fan motor keeps running until the power cord of the Media

Receiver is removed from a wall outlet,

Do not attach such items as labels and tape to the

product.

•This may result in the discoloration or scratch of the cabinet,

When not using the product for along period of time

• If you do not use the product for a long period of time, tile

functions of the product may be adversely affected, Switch on

and run the product occasionally,

Condensation

• Condensation may take place on the surface or inside of tile

product when the product is rapidly moved from a cold place

to a warm place or just after a heater is switched on in winter

morning, for example, When condensation takes place, do

not switch on the product and wait until condensation

disappears, Using the product with condensation may result

in malfunction,

Cleaning the screen

• When cleaning the screen of this product, gently wipe it with

a soft dry cloth; the supplied cleaning cloth or other similar

cloths (e,g,, cotton and flannel), If you use a hard cloth or rub

the screen hard, the surface of the screen will be scratched,

• If you clean the surface of the screen with a wet cloth, water

droplets on the surface may enter into the product, resulting

in malfunction,

Cleaning the cabinet

• When cleaning the cabinet of this product, gently wipe it with

a soft dry cloth; the supplied cleaning cloth or other similar

cloths (e,g,, cotton and flannel), If you use a hard cloth or rub

the cabinet hard, the surface of the cabinet will be scratched,

• The cabinet of this product is mostly composed of plastic, Do

not use chemicals such as benzine or thinner to clean the

cabinet, Using these chemicals may result in quality

deterioration or coating removal,

• Do not expose the product to volatile gas or fluid such as

pesticide, Do not make the product contact with rubber or

vinyl products for a long period of time, The effect of

plasticizer in the plastic may result in quality deterioration or

coating removal,

• If you clean the surface of the cabinet with a wet cloth, water

droplets on the surface may enter into the product, resulting

in malfunction,

Handles at the rear of the Plasma Display

• Do not remove the handles from the rear of tile Plasma

Display,

• When moving the Plasma Display, ask another person for

help and use the handles attached to the rear of the Plasma

Display, Do not move the Plasma Display by holding only a

single handle, Use the handles as shown,

• Do not use the handles to hang the product when installing

or carrying the product, for example, Do not use the handles

for the purpose of preventing the product from tilting over,

Supplied Accessories }

Plasma Display

Power cord (2 m/6,6 feet) Cleaning cloth Speed clampx 3

Bead band x 3 Warranty card

Speaker cushion x 3

(For PDP-5045HD/4345HD only)

(Use when installing the optional speakers at

the bottom of the Plasma Display,)

Media Receiver

Power cord (2 m/6,6 feet) Remote control unit System cable (3 m/9,8 feet)

AA size batteryx 2 Stand

(Alkaline battery)

Screw x 4

(for stand)

Screw hole cap x 4 VCR controller

(1,8 m/5,9 feet)

NOTE

•Always use the power cord supplied with the Plasma Display and the

one supplied with the Media Receiver for each t'espective unit.

Operating Instructions Instruction guide

rPart Names

I, /)

Plasma Display

Illustrations show PDP-5045HD/4345HD,

Front view (right view) 1 POWER button

2STANDBY indicator

3POWER ON indicator

4Remote control sensor

5 STANDBY/ON button

6 INPUT button

7 VOLUME +/- buttons

8 CHANNEL +/- buttons

Rear view

:; 10 SYSTEM CABLE terminal (WHITE)

11 SPEAKER (right/left) terminals

_12 AC INLETterminal

The terminals have faced downward,

Ill

Media Receiver

Front view

1 POWER button

2POWER ON indicator

3STANDBY indicator

4 RECTIMER indicator

5 DATAACOUISITION indicator

6 INPUT 4 terminals

(COMPONENT VIDEO: Y, CB/PB, CR/PR)

7INPUT4terminal (S-VIDEO)

8INPUT 4 terminal (VIDEO)

9INPUT4terminals (AUDIO)

10 PC INPUTterminal (AUDIO)

11 PC INPUTterminal (ANALOG RGB)

Part Names _:,

Rear view

€,Q

1CONTROL IN terminal

2CONTROL OUT terminal

3VCR CONTROL terminal

4 ANTENNA B IN terminal

5ANTENNA/CABLEA IN terminal

6 INPUT2 terminal (VIDEO)

7 INPUT2 terminals (AUDIO)

8i.LINK terminals

9Cable CARD slot

10 INPUT 1 terminals (AUDIO)

11 DIGITAL OUTterminal (OPTICAL)

12 INPUT1 terminals

(COMPONENT VIDEO: Y, CB/PB, CR/PR)

13 AC IN terminal

14 RS-232C terminal (used for factory setup)

15 ANTENNA B OUT terminal

16 INPUT 2 terminal (S-VIDEO)

17 MONITOR OUT terminal (S-VIDEO)

18 MONITOR OUT terminal (VIDEO)

19 MONITOR OUT terminals (AUDIO)

20 INPUT 1 terminal (VIDEO)

21 INPUT 1 terminal (S-VIDEO)

22 INPUT 3 terminals (AUDIO)

23 INPUT 3 terminals

(COMPONENT VIDEO: Y, CB/PB, CR/PR)

24 HDMI terminals (INPUT1/INPUT3)

25 SYSTEM CABLE terminal (WHITE)

26 SYSTEM CABLE terminal (BLACK)

E_q

/Part Names

I, /I

Remote control unit

Mode switch (with

[,,3 I_1 "TV" selected)

_ I _£>SAT;_ ...................................................

G- ,

I I m

ki ........... _ ii

_ P#oneer

( PLASMA DISPLAY)

With the mode switch set to TV

1 TV_: Turns on the power to the Plasma

Display or places it into standby mode.

2Transmission confirmation LED

3INPUT: Selects an input source of the Plasma

Display. (INPUT 1, INPUT 2, INPUT 3, INPUT 4,

PC, i.LINK)

4,(dot): Enters a dot.

5 CH RETURN: Returns to the previous chan-

nel.

6 CH +/-: Selects the channel.

7 RETURN: Returns to the previous menu

screen.

8÷/÷/÷/-I,: Selects a desired item on the menu

screen.

9 DTV INFO: Shows more information on DTV

programs.

10 SPLIT: Switches the screen mode among 2-

screen, picture-in-picture, and single-screen.

11 FREEZE: Freezes a frame from a moving

image. Press again to cancel the function.

12 SWAP: Switches between the two screens

when in the 2-screen or picture-in-picture

mode.

13 SHIFT: Moves the location of the small screen

when in the picture-in-picture mode.

14 -.'.6.'-:Whenpressed, all buttons on the remote

control unit will light. The lighting will turn

off if no operations are performed within

about 5 seconds. This button is used for

performing operations in dark places.

15 ANT: Selects the antenna (A, B). See pages 21

and 22 for details.

16 MTS: Selects the MTS/SAR

17 0 -9: Selects the channel.

18 CH ENTER: Executes a channel number.

19 VOL +/-: Sets the volume.

20 _ MUTING: Mutes the sound.

21 HOME MENU: Displays the menu screen.

22 ENTER: Executes a command.

23 FAVORITE CH (A, B, C, D):

Selects any of the four preset channels. See

page 37 for details to set the FAVORITE CH.

While watching, you can toggle the set chan-

nels by pressing A, B, C and D.

24 SCREEN SIZE: Selects the screen size.

25 DISPLAY: Displays the channel information.

26 AV SELECTION: Selects audio and video

settings. (AV mode: STANDARD, DYNAMIC,

MOVIE, GAME, USER. PC mode: STANDARD,

USER.)

27 SLEEP: Sets the sleep timer.

NOTE

•When using the remote control unit, point it at the Plasma Display.

• See pages 62 to 68 fo_"operating buttons not listed on this page,

Preparation

Installing the Plasma Display

Over 50 cm (19 _/_ inches)

Over10

cm(315/16

inches)

Using the optional PIONEER stand

For details on installation, refer to the instruction manual

supplied with the stand,

_CAUTION

•This product may be used only with model PDK-TS04 stand,

Use with other stands may result in instability causing

possible injury,

Using the optional PIONEER speakers

For details on installation, refer to the instruction manual

supplied with the speaken

_CAUTION

Operating Environment

Operating environment temperature and humidity: +0°C to

+40°C (+32°F to +104°F)1 less than 85% RH (cooling vents not

blocked)

Avoid installing at the following locations:

• Under direct exposure to sunlight

• Under strong arlificial light

• In high humidity

• Poorly ventilated

Illustration shows PDP-5045HD/4345HD,

Locating

• Avoid direct sunlight, Maintain adequate ventilation,

• The length of the system cable used to connect the Plasma

Display and the Media Receiver is about 3 m (9,Sleet),

• Because the Plasma Display is heavy, be sure to have

someone help you when moving it,

_lL CAUTION

• If you place anything on the top of the Media Receiver it will

not receive enough ventilation and will not operate properly,

NOTE

• Allow enough space around the upper and back parts when

installing to ensure ventilation around the backside,

,, Preparation j_

Installing the Media Receiver

Plasma Display

','\

Media Receiver

(vertical installation)

J'i2222::::::::£222_

(horizontal installation)

Installing the Media Receiver vertically

You carl use tile supplied stand to install the Media Receiver

vertically,

1. Insert the stand into the side of the Media

Receiver.

Right side

System cable (approx, 3 m/9,8 feet)

_k CAUTION

•Do not place a VCR or any other device on the top of the

Media Receiver.

•When installing, allow enough space on the sides and

above the Media Receiver.

•Do not block the side cooling vents or the rear ventila-

tion fan opening of the Media Receiver.

Over 5 cm

(2 inches)

Over 5 cm Over 5 cm

(2 inches) (2 inches)

Over 10 cm

(3 lS/16inches)

Secure the stand with the supplied screws.

Screws

I[,1

Erl

Over 5 cm

(2 inches)

Over 10 cm

(3 lS/16inches)

Over 5 cm

(2inches) I I

............... /

I-I

Over 5 cm

(2 inches)

Preparation }

3. Remove the shock absorbing pads.

Shock absorbing pad

I"11

Keep the shock absorbing pads and screws, They are required

when you place the Media Receiver in the horizontal position,

4. Plug the screw holes using the supplied caps.

Remove the separation shee{'_

Align with the

hole and attach,

Screw bob cap

,_ CAUTION

•When you have installed the Media Receiver vertically,

be sure to use the supplied stand, If you place the unit

directly on the floor, the cooling vents will be blocked,

resulting in mechanical failure,

,, Preparation ,_

Connecting the system cable

Connecting the system cable to the Plasma Display

Plasma Display (rear view)

! !

(WHITE/ (BLACK) For details on optional PIONEER speaker

installation, refer to the instruction manual

that came with the speaker,

System cable

Connecting the system cable to the Media Receiver

Media Receiver (rear view)

<BLACK)

(WHITE)

_k CAUTION

•THESE SPEAKER TERMINALS CAN BE APPLIED WITH HAZARDOUS VOLTAGE WHEN YOU CONNECT OR DIS-

CONNECT THE SPEAKER CABLES. TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT TOUCH

UNINSULATED PARTS BEFORE DISCONNECTING THE POWER CORD.

i t:]

Preparation

Routing cables

Speed clamps and bead bands are supplied for bunching cables, Once properly bunched, follow the steps below to route the

cables,

When the speakers are installed on the sides

/ i

(rear view)

Speaker cable Cable binders (supplied Speed clamps Speaker cable

with the stand)*

Attaching speed clamps to the main unit

Attach the speed clamps using tile 4 holes marked with l

below, depending on your routing system,

Attaching and removing speed clamps

Inset1 [1] into an appropriate bole on tile rear of the Plasrna

Display and snap [2] into the back of [1] to lock the clamp,

Speed clamps are designed to be difficult to undo once in

place, Please attach them carefully,

Use pliers to twist the clamp 90°, pulling outward, The clamp

may deteriorate over time and become damaged if removed,

When the speakers are installed at the bottom

(For PDPS045HD/4345HD only)

Speaker cable I

Cable binders (supplied

with the stand)*

Speaker cable

*Cable binder

Using the cable binders supplied with the stand, put the

speaker and system cables together so that the cables are

invisible from the front, At that time be careful not to apply

any force to the connection sections of the cables,

D f. _\

,, Preparation

Preparing the remote control unit

Inserting batteries

1Open the battery cover.

Allowed operation range of the remote control

unit

Operate the remote control unit while pointing it toward tile

remote control sensor (_1) located at the bottom right of the

front panel of the Plasma Display, The distance from the remote

control sensor must be within 7 m (23 feet) and the angle

relative to the sensor must be within 30 degrees in the right or

left direction,

2 Insert the supplied two AA size batteries.

•The battery polarities must correspond with the (+) and

(-) indicators in the battery compartment,

3 Close the battery cover.

Cautions regarding batteries

• Tile remote control unit cannot operate the system if tile

batteries in the unit are empty, When this happens, replace

the batteries with new ones,

• Do not use manganese batteries, When you replace the

batteries, use alkaline ones,

• Do not mix batteries of different types, Different types of

batteries have different characteristics,

• Do not mix old and new batteries, Mixing old and new

batteries can shorlen the life of new batteries or cause

chemical leakage in old batteries,

• Do not leave dead batteries in the remote control unit;

chemical leakage will occur, If you find any chemical leakage,

wipe thoroughly with a cloth,

• The batteries supplied with this product may have a shorler

life expectancy due to storage conditions,

• If you will not use the remote control unit for an extended

period of time, remove the batteries from it,

_k CAUTION

•WHEN DISPOSING OF USED BATTERIES, BE SURE

TO COMPLY WITH GOVERNMENT REGULATIONS

AND ENVIRONMENTAL PROTECTION GUIDELINES

THAT APPLY IN YOUR COUNTRY OR AREA,

Remote control

30 ° sensor

Cautions regarding the remote control unit

• Do not expose the remote control unit to shock, liquid, or

high humidity,

• Do not place the remote control unit under direct sunlight;

the unit may deform,

• The remote control unit may not work properly if the remote

sensor window of the Plasma Display is under direct sunlight

or strong lighting, In such case, change the angle of the

lighting or Plasma Display, or operate the remote control unit

closer to the remote sensor window,

• When any obstacle exists between the remote control unit

and the remote control sensor, the remote control unit may

not function,

• As the batteries become empty, the remote control unit can

function within a shorler distance from the remote control

sensor, Replace the batteries with new ones if necessary,

• The Plasma Display emits very weak infrared rays from its

screen, If you place such equipment operated through

infrared remote control as a VCR nearby, that equipment may

not receive commands from its remote control unit properly

or entirely, If this is the case, place that equipment at a

location far enough from the Plasma Display,

• Depending on the installation environment, infrared rays

from the Plasma Display may not allow this system to

properly receive commands from the remote control unit or

may shorten allowable distances between the remote control

unit and the remote control sensor, The strength of infrared

rays emitted from the screen differs, depending on images

displayed on the screen,

pZl]

Preparation }

Cable connections for watching digital

and/or conventional TV channels

This system is equipped with two terminals for inputting TV

broadcasting signals: ANTENNA/CABLE A IN and ANTENNA B,

The ANTENNA/CABLE A IN terminal accepts both digital and

conventional TV broadcasting signals while the ANTENNA B

terminal accepts only conventional TV broadcasting signals,

When using a cable TV to watch digital and/or conventional TV

channels, connect to the ANTENNA/CABLE A IN terminal as

shown, In addition, you may connect an antenna to the

ANTENNA B terminal as shown; use an outdoor antenna to

enjoy clearer pictures, If your outdoor uses a 75-ohm coaxial

cable with an F-type connector, plug it into the antenna

terminal at the rear of the Media Receiven

Connecting VHF/UHF antennas and a Cable

Converter

Media Receiver (rear)

Cable TV HSplitter

I Cable Converter

I((o ))1

Media Receiver (rear)

OUT

Cable connections for watching digital

TV channels over air (VHF/UHF)

If using VHF and UHF antennas to ,watch digital TV channels,

connect the coaxial cables as shown,

Connecting VHF/UHF antennas

VHF antenna UHF antenna

T.{__ '/v mixer _4}_

OUT

Media Receiver

(rear)

r_J NOTE

•Be sure to connect coaxial cables as shown above, Signal reception

may fail if not properly connected,

r_ NOTE

•Be sure to connect coaxial cables as shown above. Signal reception

may fail if not properly connected,

D 'x_ _\

,, Preparation

Switching between antenna A and B

To watch broadcasts via the two antennas, you carl select it by

pressing ANT on the remote control unit.

• While watching a broadcast, press ANT to view the image

received from the other antenna.

• Pressing ANT while watching in the 2-screen mode (rv

image and video image) with TV selected will display the TV

image of the other antenna.

• Pressing ANT while watching in the 2-screen mode with two

TV images displayed will not have any effect.

• Pressing ANT while watching in the 2-screen mode with two

video images displayed will switch the selected screen to a

TV image.

Inserting the cable card

Tile Media Receiver is equipped with a slot for inserting a cable

card. When you are watching digital and/or High Definition TV

channels over cable, the card allows you to use the POD

service provided by the cable TV company; the POD stands for

Point of Deployment. This service presents various types of

useful information, using HTML text.

1Confirm that the ANTENNA/CABLEA IN terminal has

been connected with the coaxial cable from the Cable

Converter. See page 21.

2Hold the tab of the slot cover on the rear of the Media

Receiver, and remove the cover while releasing the tab's

latch.

3Insert the specified cable card into the Cable CARD slot

as far as it goes.

NOTE

•Be sure to insert only the specified cable card,

•Do not insert a PCMCIA card,

Tab

Preparation

Connecting the power cord

Connect the power cord after all component connections have been completed,

Plasma Display (rear view)

L I:a

i_,i ii ............... 14i i ii;i

Media Receiver (rear view)

Power cord

Noise filter

Partially eliminates noise

caused by the power source,

Noise filter

Partially eliminates noise

caused by the power source,

_CAUTION

• Use only the supplied power cord.

•Be sure to use the specified power supply voltage;

neglecting this can result in fire or electric shock.

•For the Plasma Display System, athree-core power cord

with aground terminal is used for efficiency protection.

Always connect the power cord to athree-pronged

outlet and make sure that the cord is properly grounded.

NOTE

• Always turn off the power of the Plasma Display and Media Receiver

when connecting the power cords.

• Disconnect the power cord from the power outlet when the Plasma

Display System is not going to be used for a long period of time,

/Basic OperationsI/i

Turning on the power (Standby)

1Press POWER on tile Plasma Display if tile STANDBY

indicator is off.

• The STANDBY indicator on the Plasma Display lights

up red.

2 Confirm that the STANDBY indicators light up red, and

then press TVdDon the remote control unit or

STANDBY/ON on the Plasma Display or POWER on the

Media Receiver to turn the system on.

• The POWER ON indicators on the Plasma Display and

Media Receiver light up green.

[] NOTE

•In this manual, "system" means the Plasma Display Panel and Media

Receiver,

Plasma Display

,.,,,

-' STANDBY indicator

POWER ON indicator

POWER button

H]ustrationshows PDP-5045HD/4345HD,

(right view)

Turning off the power (Standby)

1Press TV _ on the remote control unit or STANDBY/ON

on the Plasma Display or POWER on the Media Receiver.

• The system enters the standby mode and the image on

the screen disappears.

• Both STANDBY indicators light up red.

• It is recommended to place the system into the standby

mode by pressing TV dOon the remote control unit.

This allows the system to automatically receive digital

TV program information in the standby mode.

NOTE

• If you are not going to usethis system for a long period of time, press

POWER on the Plasma Display and remove the power cord from the

power outlet.

STAN DBY/

ON button

Media Receiver

_I=):_ER _i|:_:NDSY indicator .................... _

POWER button

Plasma Display/Media Receiver status indicators

Plasma Display Media Receiver

POWER ON STANDBY POWER ON STANDBY

Powerto the PlasmaDisplay and Media Receiveris off. Or the power cords

havebeen disconnected.

_*_ _0__ Powerto the system ison.

_O_ The system is in the standby mode.

_,[- The power cord has been disconnected from the Media Receiver.

Flashing

. _,0[_ Powerto the PlasmaDisplay is off. Or the power cord has been disconnected

Flashing from the PlasmaDisplay.

For other than the above, see "Troubleshooting" on page 69.

Basic Operations

Watching TV channels

Unless you set up TV channels that you carl watch under the

current conditions, you cannot tune in those channels, Forthe

procedure, see "Setting up TV channels" on page 31,

_'_ NOTE

• When watching a digital TV program, you may see emergency alert

messages scrolling at the top of the screen. Those messages are

broadcasted by TVstations as necessary when in emergency

situations,

Selecting the antenna

After confirming that the Mode switch on tile remote control

unit has been set to "TV", press ANT on the remote control unit

to select antenna A or B,

• Make this selection depending on the connections to the

antenna input terminals on the Media Receiver (page 21),

Changing channels

To increase the channel number, press CH + on the remote

control unit, To decrease the channel number, press CH -,

• CHANNEL +/- on the Plasma Display operates the same as

CH +/- on the remote control unit,

• Press CH RETURN to switch the currently tuned channel to

the previously tuned channel,

Press CH RETURN again to restore the currently tuned

channel,

Using 0 -9 and • (dot) on the remote control unit

Select channels directly by pressing buttons 0to 9, To select

subchannels, also use the •(dot) button,

EXAMPLE

• To select channel 5 (1-digit channel), press 5,

• To select channel 25 (2-digit channel), press 2 then 5,

• To select channel 125 (3-digit channel), press 1, 2, then 5,

• To select subchannel 10,01, press 1, 0, • (dot), 0, then 1,

• To select subchannel 10,001 (for the cable TV), press 1, 0,

• (dot), 0, 0, then 1,

_'_ NOTE

• After entering a channel or subchannel number, you may press

CH FNTFR to tune in the channel more quickly.

• Each time you change a channel, such a channel banner appears

that shows information about the currently selected channel. To clear

the channel banner, press DTV INFO For more information about

the channel banner, see "Viewing a channel banner" on page 26,

Plasma Display

(right view)

i i 'i_?i: ::!!i _ ,/

iiiiiiil]iiil],'_!,TTil]iiiiil]]]]_ii!]iiiiil]]_i

I CH RETURN

mi'iii

Channelbanner

€.Q

/Basic Operationsi, /i

Changing the volume and sound

To increase the volume, press VOL + on the remote control

unit, To decrease the volume, press VOL -,

•VOLUME +/- on the Plasma Display operates the same as

VOL +/- on the remote control unit,

• To mute the sound output, press MUTING, "1_-(" appears on

the screen, To quit muting, press MUTING again, Pressing

VOL + also quits muting,

Plasma Display

(right view)

III _, I

vo,uME+/---[E;

Viewing a channel banner

While watching a digital TV program, pressing DTV INFO

causes tile following banner to appear, Pressing DTV INFO

again causes tile banner to disappean

Volume adjustment

Muting

1Station name

2Current time

3Channel number

4Input (Ant, A or Ant, B)

5Program time schedule

6Program title

7TV rating and program description (This may be unavailable

for some programs,)

NOTE

•The above information is not displayed if not included in broadcast

signals.

• If "#" is shown at the bottom right of the channel banner containing

program description, press ,_/'_IFto scroll the program description,

I,z,l

Basic Operations

Using the POD service

If you have watched digital and/or High Definition TV channels

over cable, you can use the POD service )rovided by the cable

TV company, This service presents various types of useful

information, using HTML text,

C:i ............

_ fi_ ii _CIIIIIII_iii

Press HOME MENU, 9, 9, then 9to view the POD display,

r_ NOTE

•If you have enabled data acquisition using the menu, POD

information is automatically acquired even wben the system is in the

standby mode, See page 32.

Changing the language

If you have selected a digital TV program that provides multi-

language services, you can switch among the languages by

pressing MTS on the remote control unit,

i iil]il!i

i:E:

Each time you press MTS, the language switches,

_J NOTE

• Switchable languagesdiffer depending on tbe current broadcast.

• If tbe language selectedthrough language setting is available when

the channel or program ischanged,you will hear that language,

Setting MTS/SAP mode

When watching conventional TV programs, you may enjoy

stereo sound and/or Secondary Audio Programs (SAP), using

the Multi-channel Television Sound (MTS) function,

• Stereo broadcasts

You can enjoy, for example, sports, shows, and concerts in

dynamic stereo sound,

•SAP broadcasts

MAIN sound: The normal program soundtrack (either in

mono or stereo),

SAP sound: Listen to second language, supplementary

commentary and other information, (SAP is mono sound,)

r_ NOTE

• Conventional T'? channels in this manual designate TV channels that

are received through the conventional VHE/UHF frequencies or

conventional cable TV channels.

• When stereo sound is difficult to hear, you may manually switch to

the MONO mode to obtain clearer sound.

• Once the MONO mode is selected, the Plasma Display System

sound t'emains mono even if the system receives a stereo broadcast.

You must reselect the STEREO mode if you want to hear stereo

sound again,

• Selecting MTS while the input source is INPUT 1 to 4 or PC does not

change the type of sound. In this case, sound is determined by the

video source,

Each time you press MTS, MTS toggles as shown below,

STEREO mode SAP mode MONO mode

NOTE

• h°_each of the MTS/SAP modes selected using the MTS button, the

display changes depending on broadcasting signals being received,

€_

JBasic OperationsI j

When receiving STEREO sound signals

In STEREO mode

In SAP mode

Using the multiscreen functions

Splitting the screen

Use tile following procedure to select the 2-screen or picture-in-

picture mode,

2-screen

In MONO mode

When receiving MAIN + SAP sound signals

In STEREO mode Picture-in-picture

In SAP mode

In MONO mode

When receiving STEREO + SAP sound signals

In STEREO mode

In SAP mode

In MONO mode

SPLIT SCREEN

SWAP SHIFT

I I ::::::: ::::Z::;¸¸

When receiving MONO sound signals

In STEREO mode

Press SPLIT to select the display mode.

• Each time you press SPLIT, the display mode is

switched among 2-screen, picture-in-picture, and

single-screen.

In SAP mode

In MONO mode

I,,_:]

Basic Operations

• In 2-screen or picture-in-picture mode, press SWAP to

switch the position of the 2 screens shown.

Left screen is the active screen which will be indicated

by "jb". The user is allowed to operate picture and

sound.

Freezing images

Use the followb_g procedure to capture and freeze one frame

from a moving image that you are watching.

Normal image Still image

• In 2-screen mode, press SCREEN SIZE to change the

size of the left screen.

• In picture-in-picture mode, press SHIFT to move the

position of the small screen in anti-clockwise.

:? %19 ¸¸¸¸¸¸¸

FREEZE

i!!iiiiiiiiiiiiiiiiiliiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_i_iiiiiiiiiiiiiii_ii

1Press FREEZE.

• Astill image appears on the right screen while a

moving image is shown on the left screen.

2 Press FREEZE again to cancel the function.

NOTE

•With the screen split, any image cannot be frozen.

• When this function is not available, a warning message appears.

To select the desired input source, press the appropriate

input source button.

• If watching TV programs, press CH +/-to change the

channel.

NOTE

• The multiscreen function cannot display images from the same input

source at the same time. If you make such an attempt, a warning

message appears.

• When you press HOME MENU or DlV INFO, the single-screen

mode is restored and the cemesponding menu is displayed.

• When the two screens show the same analog broadcasting coming

through antenna A and B. the picture quality may differ between the

two screens.

JMenu SetupI, /I

Menu configuration

AV mode menus

Reset

just

Treble

Bass

Balance

Reset

FOCUS

...........................................................................................Front Surround

Energy Save

No Signal off

...........................................................................................No Operation off

I i I- [4o I

Position

Side Mask

HDMI Input

Monitor Out

Digital Audio Out

Language

51,52

52, 53

Channel Setup

Parental Control

Favorites

Closed Captions

Recorder Setup

Clock

31,32

33-37

37-39

56-57

[!i_i_!_i_i_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_iiiii_i!_i!_!_!_- 48, 49

PC mode menus

AV Selection 40

Contrast 41

Brightness 41

Red 41

Green 41

Blue 41

Reset 41

Treble 42

Bass 42

Balance 42

Reset 42

FOCUS 43

...........................................................................................Front Surround 43

iiii iii i i i i ii iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii i iiii i !! !i! !i!iIEner ySave

Power Management 44

li_i I- 140

Auto Setup 44t__.55

Manual Setup

Menu operations

The following describes the typical procedure for setting up the

menus. For the actual procedures, see the appropriate pages

that describe individual functions.

1Press HOME MENU.

2 Press _/_ to select a menu item, and then press ENTER.

;3 Repeat step 2 until you access the desired submenu item.

• The number of menu layers differs depending on menu

items.

• If you select "Tuner Setup" or "Timers", a menu bar

appears at the bottom of the screen. To select a

submenu item on the bar, press ÷/-_ instead of ÷/_1,.

4Press ÷/-b to select an option (or parameter), and then

press ENTER.

• For some menu items, press _/_I, instead of 4-/_.

5Press HOME MENU to exit the menu.

NOTE

•You can return to the upper menu levels by pressing RETURN.

Tuner Setup

Setting up TV channels

This section describes how to search and set up TV channels

that you can watch under the current conditions. Unless you set

up TV channels using Auto Channel Preset, you may not be able

to tune in those channels.

Using Auto Channel Preset

Auto Channel Preset automatically searches and sets up TV

channels.

1Press HOME MENU.

2Select "Tuner Setup". (÷/+ then ENTER)

3Select "Channel Setup". (+/-b then ENTER)

4Select "Ant. A" or "Ant. B". (4"/_F then ENTER)

5Select "Auto Channel Preset". (4'-/+ then ENTER)

6Select "Air" or "Cable". (_1"/_1,then ENTER)

• Channel search automatically starts.

• To quit Auto Channel Preset halfway, press D.

7After Auto Channel Preset has been finished, press

HOME MENU to exit the menu.

NOTE

• When using the Cable Converter, you may need to manually add

Cable Converter output channels.

Setting for skipping unwanted channels

From among TV channels searched and set up using Auto

Channel Preset, you can select channels to be skipped when

CH +/- are operated.

1Press HOME MENU.

2Select "Tuner Setup". (+/_1, then ENTER)

3Select "Channel Setup". (÷/-b then ENTER)

4Select "Ant. A" or "Ant. B". (+/+ then ENTER)

5Select "Channel Keep/Skip". (4',/+ then ENTER)

6Select a channel to be skipped. (÷/_F then ENTER)

• For the skipped channel, a check mark disappears.

7Press HOME MENU to exit the menu.

NOTE

• To restore skipped channels, use the above procedure except that you

select a skipped channel in step 6.

• When using the Cable Converte_i you may need to manually add

Cable Converter output channels.

Setting up TV channels manually

This section describes how to manually set up TV channels that

have not been set up byAuto Channel Preset.

1Press HOME MENU.

2Select "Tuner Setup". (÷/_ then ENTER)

3Select "Channel Setup". (+/-> then ENTER)

4Select "Ant. A" or "Ant. B". (+/+ then ENTER)

5Select "Add Channel". (+/_k then ENTER)

6Select a channel number to be added. (÷/+ then ENTER)

• You can also use buttons 0-9 to enter a channel

number.

• After ENTER has been pressed, a confirmation screen

appears.

Press Ato complete the setup processing.

Press HOME MENU to exit the menu.

Tuner Setup j

Naming TV channels

You car] name TV channels that you have set up for antenna B.

This may help you easily identify the channels during selections.

1Press HOME MENU.

2Select "Tuner Setup". (÷/4, then ENTER)

3Select "Channel Setup". (÷/-b then ENTER)

4Select "Ant. B". (÷/4, then ENTER)

5Select "Name Channel". (,_/,!, then ENTER)

6Select a channel. (÷/_1, then ENTER)

• You can also use buttons 0- 9to enter a channel

number.

7 Enter up to 7 alphanumeric characters using 41"/_,

4-/-b, and ENTER.

• To clear the last character, press B.

8Press A.

9Press HOME MENU to exit the menu.

Checking signal strength

When you have selected antenna A, you carl check the current

channel's signal strength. You may use this function when

receiving a channel through a VHF/UHF antenna.

1Press HOME MENU.

2 Select "Tuner Setup". (4_/_1, then ENTER)

3Select "Channel Setup". (÷/-b then ENTER)

4Select "Ant. A". (4,/4r then ENTER)

5Select "Signal Strength". (÷/4r then ENTER)

Checking the Cable Card ID

The Media Receiver has a slot for a cable card that is used for

managing your information by the cable TV company. The

following procedure allows you to check your Cable Card ID and

the Host ID.

1Press HOME MENU.

2 Select "Tuner Setup". (÷/4, then ENTER)

3Select "Channel Setup". (÷/-b then ENTER)

4Select"POD ID". (41"/41,)

• The Host ID and Cable Card ID appear.

5Press HOME MENU to exit the menu.

Enabling data acquisition

Use this function to enable the system to automatically acquire

information about digital TV programs even when in the standby

mode,

1Press HOME MENU.

2Select "Tuner Setup". (4F/,I, then ENTER)

3Select "Channel Setup". (÷/-_ then ENTER)

4Select "Data Acqu". (÷/_1, then ENTER)

5Select "Enabled". (÷/,1, then ENTER)

6Press HOME MENU to exit the menu.

r_ NOTE

•The DATA ACQUISITION indicator on the front of the Media

Receiver lights while data is being acquired,

• Adjust the direction of the antenna so that the current

signal strength reaches as close to the maximum signal

strength as possible.

Press HOME MENU to exit the menu.

ic_,1"_

Tuner Setup

Parental Control

With the Parental Control, parents can prevent their children

from watching inappropriate TV programs, VCR or DVD

contents, When an attempt is made to watch a program (or

content) blocked by parents, the Plasma Display shows nothing

but a message, The Parental Control functions for both

conventional and digital TV channels,

In the U,S, three rating systems have been provided: the TV

ratings, TV Parental Guidelines, and movie ratings, Movie

ratings are provided by the Motion Picture Association of

America (MPAA) and are used for original movies not edited for

television,

For the rating system in Canada, see pages 36 and 37,

Voluntary movie rating system (MPAA)

G General audiences. All ages admitted,

PG Parental guidance suggested. Some material

may not be suitable for children.

PG-13 Parents strongly cautioned. Some material

may be inappropriate for children under lg,

Age-Base R Restricted, Under 17 requires accompanying

parent or adult guardian (age varies in some

jurisdictions).

NC-17 No one 17 and under admitted.

Adult A rating that has now been superseded by

NC-1Z

NR Not rated,

NOTE

•The voluntary movie rating system only uses an age-based rating.

TV ratings

Age-Base

TV-Y

TV-Y7

TV-G

TV-PG

TV-14

TV-MA

All children

Children 7 and above

General audiences

Parental guidance suggested

Parents strongly cautioned

Mature audiences only

TV Parental Guidelines

TV-Y

(Allchildren}

TV-Y7

(Directedtoolderchildren)

TV-G

Age-Base(Generalaudience)

TV-PG

(Parentalguidancesu@ested)

TV-]4

(Parentsstronglycautioned)

TV-MA

(Matureaudienceonly}

X: Content rating can be set.

Changing the password

Using a password prevents other persons from changing

Parental Control settings, A default password (1234) has been

set before shipment, Use the following procedure to change the

password,

1Press HOME MENU.

2Select "Tuner Setup". (÷/@ then ENTER)

3Select "Parental Control". (÷/@ then ENTER)

4 Select "Password". (÷/@ then ENTER)

5Select "Change Password". (÷/@ then ENTER)

6Enter the current 4-digit password, using buttons 0 - 9.

7Enter a 4-digit password to be newly set, using buttons

0-9.

8Enter the same password that you have entered in step 7.

• A confirmation screen appears.

9 Press A.

10 Press HOME MENU to exit the menu.

r'_ NOTE

• Take a note of the newly set password and keep it handy.

Tuner Setup j

Clearing the password

Use the following procedure to clear the password.

1Press HOME MENU.

2Select "Tuner Setup". (41"/_Fthen ENTER)

;3 Select "Parental Control". (4-/-i, then ENTER)

4 Select "Password". (41"/4,then ENTER)

5Select "Clear Password". (÷/_1, then ENTER)

Setting the voluntary movie rating system

(MPAA)

1Press HOME MENU.

2 Select "Tuner Setup". (÷/,I, then ENTER)

;3 Select "Parental Control". (4-/'i' then ENTER)

4 Select "MPAA Ratings". (÷/,I, then ENTER)

5Select the desired rating and change the setting. (÷/_1,

then ENTER)

6Enter the current 4-digit password, using buttons 0- 9.

• A confirmation screen appears.

7Press A.

8 Press HOME MENU to exit the menu.

NOTE

Theabovep{_ocedurewill resetthe passwordto the factory default

Activating the Parental Control

1Press HOME MENU.

2Select "Tuner Setup". (+/_ then ENTER)

3Select "Parental Control". (÷/_ then ENTER)

4Select "Status". (_/4, then ENTER)

5Select "On". (÷/41, then ENTER)

• The password entry screen appears. Enter your 4-digit

password using buttons 0- 9.

6 Press HOME MENU to exit the menu.

_'_ NOTE

•If you select "Off" in step 5, then select 'Reset on Startup" or "Don't

Reset". With "Reset on Startup" selected, the Parental Control is

autornatically activated when the power to the system is turned off

and on. With "Don't Reset" selected, the Parental Control remains off

when the power to the system is off and on.

• The password entry screen appears. Enter your 4-digit

password using buttons 0- 9.

• Each time you press ENTER, the setting is switched.

• A lock icon appears beside the blocked rating.

• All the ratinqs have been unblocked before shipment.

6Press HOME MENU to exit the menu.

_'_ NOTE

• Blocking a rating causes more severe l'atings to be automatically

blocked as well. Likewise, unblocking a rating causes less severe

ratings to be automatically unblocked.

Tuner Setup }

Setting the TV ratings

1Press HOME MENU.

2Select "Tuner Setup". (_/_ then ENTER)

3Select "Parental Control". (4-/'I' then ENTER)

4Select "TV Ratings". (4=/_kthen ENTER)

5Select the desired rating and change the setting. (4k/_l,

then ENTER)

Blocking Not Rated TV programs _>__'_i_!,_@_

Use the following procedure to block TV programs whose rating

information is unavailabb, m

1Press HOME MENU. i,

2Select "Tuner Setup". (÷/_ then ENTER) _.-

;3 Select "Parental Control". (÷/-_ then ENTER)

4Select "Unavailable Ratings". (4_MI, then ENTER)

5Select "Block" or "Don't Block". (÷MI, then ENTER)

•The password entry screen appears. Enter your 4-digit

password using buttons 0- 9.

• Each time you press ENTER, the setting is switched.

• A lock icon appears beside the blocked rating.

• All the ratinos have been unblocked before shipment.

6Press HOME MENU to exit the menu.

r'_ NOTE

•Blocking a rating causes more severe ratings to be automatically

blocked as well. Likewise, unblocking a rating causes less severe

ratings to be automatically unblocked.

• The password entry screen appears. Enter your 4-digit

password using buttons 0- 9.

• The factory default is "Don't Block".

Press HOME MENU to exit the menu.

Setting the TV Parental Guidelines (TV

Guidelines)

1Press HOME MENU.

2Select "Tuner Setup". (÷/_1, then ENTER)

3Select "Parental Control". (÷/-b then ENTER)

4Select "TV Parental Guidelines". (41"/_ then ENTER)

5Select the desired rating and change the setting. (÷/_1,

then ENTER)

• The password entry screen appears. Enter your 4-digit

password using buttons 0- 9.

• Each time you press ENTER, the setting is switched.

• A lock icon appears beside the blocked rating.

• All the ratinos have been unblocked before shipment.

6Press HOME MENU to exit the menu.

r_ NOTE

•Blocking a rating causes more severe ratings to be automatically

blocked as well. Likewise, unblocking a rating causes less severe

ratings to be automatically unblocked.

Tuner Setup j

Canadian French

Canadian rating systems

In Canada you carl choose the Canadian English ratings or tile

Canadian French ratings. These ratings are based on the E

Canadian Radio-Television and Telecommunications G

Commission (CRTC) policy.

Canadian English ratings

C8+

Age-Base PG

14+

18+

Exempt: Includes news, sports, documenta-

ries and other information programming; talk

shows, music videos, and variety

programming.

Children: Intended for younger children

under the age of 8 years. Pays careful

attention to themes that could threaten their

sense of security and well-being.

Children over 8 years old: Contains no

portrayal of violence as the preferred,

acceptable, or only way to resolve conflict;

nor encourage children to imitate dangerous

acts which they may see on the screen.

General: Considered acceptable for all age

groups, Appropriate viewing for the entire

family+ contains very little violence, physical,

verbal or emotional.

Parental Guidance: Intended for a general

audience, but may not be suitable for

younger children (under the age of 8)

because it could contain controversial

themes or issues.

Over 14 Years: Could contain themes where

violence is one of the dominant elements of

the storyline, but it must be integral to the

development of plot or character. Language

usage could be profane and nudity present

within the context of the theme.

Adults: Intended for viewers 18 years and

older and might contain depictions of

violence, which while related to the develop-

ment of plot, character or themes, are

intended for adult viewing. Could contain

graphic language and portrayals of sex and

nudity.

8ans+

ratings

Exempt programming.

General: All ages and children, contains

minimal direct violence, but may be

integrated into the plot in a humorous or

unrealistic manner.

General but inadvisable for young children:

May be viewed by a wide public audience,

but could contain scenes disturbing to

children under eight who cannot distinguish

Age-Base between imaginary and real situations.

Recommended for viewing with parent.

13arts+ Over 13 years: Could contain scenes of

frequent violent scenes and therefore

recommended for viewing with parent.

16arts+ Over 16 years: Could contain frequent

violent scenes and intense violence.

18arts+ Over 18 years: Only for adult viewing. Could

contain frequent violent scenes and extreme

violence.

Setting Canadian English ratings

1Press HOME MENU.

2Select "Tuner Setup". (÷/_1, then ENTER)

3Select "Parental Control". (÷/-I_ then ENTER)

4 Select "Canadian English Ratings". (÷/4, then ENTER)

5 Select the desired rating and change the setting. (@/÷

then ENTER)

• The password entry screen appears. Enter your 4-digit

password using buttons 0- 9.

• Each time you press ENTER, the setting is switched.

• A lock icon appears beside the blocked rating.

• All the ratinqs have been unblocked before shipment.

Press HOME MENU to exit the menu.

Tuner Setup }

Setting Canadian French ratings

1Press HOME MENU.

2Select "Tuner Setup". (_/_ then ENTER)

3Select "Parental Control". (÷/-k then ENTER)

4Select "Canadian French Ratings". (÷/,1, then ENTER)

5Select the desired rating and change the setting. (_/_

then ENTER)

Setting your favorite channels

Set up to 10 TV channeb to each of tile four color buttons on

the remote control unit (40 channels in total). You can then

quickly select from only your favorite channels.

1Press HOME MENU.

2Select "Tuner Setup". (4_/,Ikthen ENTER)

3Select "Favorites". (÷/_ then ENTER)

4Select a color button (A, B, C, D). (÷/_1, then ENTER)

5Select a TV channel to be registered. (÷/_1, then ENTER)

•The password entry screen appears. Enter your 4-digit

password using buttons 0- 9.

• Each time you press ENTER, the setting is switched.

• A lock icon appears beside the blocked rating.

• All the ratinos have been unblocked before shipment.

Press HOME MENU to exit the menu.

Temporarily deactivating the Parental Control

When the Parental Control is working and censors a blocked TV

program (or content), the Plasma Display shows nothing but a

message.

The method for temporarily deactivating the Parental Control

differs, depending on the currently selected input source.

Antenna A, antenna B, or i.LINK:

Press ENTER and then enter your 4-digit password,

• A star appears beside the favorite channels currently

selected.

• To register another TV channel under the same color

button, repeat step 5. To register another TV channel

under a different color button, repeat steps 4 and 5.

Press HOME MENU to exit the menu.

Setting up closed captions

Your Plasma Display System is equipped 'with an internal closed

caption decoder. Closed caption allows you to view

conversations, narration, and sound effects in TV programs and

home videos as subtitles on your Plasma Display screen.

You may enjoy digital closed captions when watching digital TV

programs. Digital dosed captions allow you to change

parameters such as fonts and colors.

• Not all programs and videos offer closed caption. Please look

for the "1_" symbol to ensure that captions will be shown.

• The password entry screen stays only for one minute, After

the screen disappears, pressing ENTER causes it to appear

again,

Input 1 -4:

Enter your 4-digit password. You need not press ENTER first,

pressing ENTER causes the password entry screen to

disappear.

• The above password entry screen will also be shown during

2-screen mode, pictureqn-picture, and while freezing an

image,

• The password entry screen stays only for one minute, After

the screen disappears, pressing ENTER causes it to appear

again,

Tuner Setup j

Activating the closed caption

1Press HOME MENU.

2 Select "Tuner Setup". (÷/_ then ENTER)

3 Select "Closed Captions". (4-/'i' then ENTER)

4Select "Status". (÷/_1, then ENTER)

5Select "On" or "On If Mute". (÷/,1, then ENTER)

Selecting digital closed captions

Usetile following procedure to select digital closed captions,

1Press HOME MENU.

2 Select "Tuner Setup". (÷/,!, then ENTER)

3 Select "Closed Captions". (÷/-k then ENTER)

4Select "Digital Settings". (_/_1, then ENTER)

5Select "Digital Service". (÷/_1, then ENTER)

6Select the desired closed caption. (_/_k then ENTER)

Off

(factory default)

On If Mute

Does not show closed captions.

Always shows closed captions.

Shows closed captions only while sound is

being muted.

6Press HOME MENU to exit the menu.

NOTE

For MONFOR OUT, only conventional closed caption signals are

output; digital closed caption signals are not output.

Selecting the type of conventional closed

captions

Select tile type of conventional closed captions that you will

watch after tuning to a conventional TV channel. This selection

also becomes effective when a selected digital TV program

provides only conventional closed captions.

• "CC1", "CC2". "CC3", or "CC4" displays subtitles of TV dramas

and news programs while allowing a full view of the picture.

• "Text1", "Text2", "Text3", or "Text4" superimposes on the

picture other information (e.g. TV guide, weather) that is

independent of the TV in progress.

1Press HOME MENU.

2 Select "Tuner Setup". (÷/_1, then ENTER)

3Select "Closed Captions". (÷/-1' then ENTER)

4Select "Analog Settings". (÷/_ then ENTER)

5Select the desired closed caption. (4k/,Ik then ENTER)

• The factory default is "Service 1".

7Press HOME MENU to exit the menu.

NOTE

• The Primary Caption Service is usually offered for Service 1.

and the Secondary Language Service is usually offered for

Service 2 if these services are available.

Selecting digital closed caption parameters

Use tile following procedure to change such parameters of

digital closed captions as font size, font type, foreground and

background colors.

1Press HOME MENU.

2Select "Tuner Setup". (÷/,!, then ENTER)

3Select "Closed Captions". (÷/-b then ENTER)

4Select "Digital Settings". (_F/_I,then ENTER)

5Select "Font Size", "Font", or any other item. (_/_F then

ENTER)

6Select the desired parameter. (_/,I, then ENTER)

7Repeat steps 5 and 6 as necessary. (÷, ÷/41,)

8Press HOME MENU to exit the menu.

• The factory default is "CCI".

6Press HOME MENU to exit the menu.

t:]E:]"

Tuner Setup

The following table shows the parameters selectable for each

item.

Font Size Auto/Large/Standard/Small

Font _ Auto/Font 1 /Font 2/Font 3/Font 4/

Font 5/Font 6/Font 7

Font Color Auto/Black/White/Red/Green/Blue/

Yellow/Magenta/Cyan

Font Opacity Auto/Solid/Transparent/Translucent/

Flashing

Background Color Auto/Black/White/Red/Green/Blue/

Yellow/Magenta/Cyan

Background Opacity Auto/Solid/Transparent/Translucent

1 Font 1 (monospaced with serifs)/Font 2 (proportionally spaced with

serifs)/Font 3 (rnonospaced without serifs)/Font 4 (proportionally

spaced without serifs)/Font 5 (casual font)/Font 6 (cursive font)/

Font 7 (small capitals font)

With "Auto" selected, parameters specified by the provider are

used; if not specified by the provider, the boided default

parameters are used. If you select parameters other than

"Auto", the selected parameters are used regardless of

provider's specifications.

Clock Setting

With "Auto Set" selected for Clock Setting, tile system acquires

and sets time information automatically, You can also manually

set the correct time, If you disconnect the power cord from the

power outlet or power blackout occurs, the set time is cleared,

1Press HOME MENU.

2 Select "Tuner Setup". (÷/4, then ENTER)

;3 Select "Clock". (4./4. then ENTER)

4Select "Time Zone". (4./4, then ENTER)

5 Select a time zone for your area. (÷/4, then ENTER)

7Select "Applies" or "Does Not Apply". (41"/4,then ENTER

•Make this selection, depending on whether summer

time is employed in your area.

8Select "Auto/Manual Set". (÷, 4./4,, then ENTER)

9Select "Auto Set" or "Manual Set". (4./4, then ENTER)

10 If you select "Auto Set", select an antenna (A or B) and a

channel number using "1"/4,and ENTER.

• The date and time will be automatically corrected using

data from the selected channel.

If you select "Manual Set", manually set the date and

time using 4./4,, 4./4. and ENTER.

11 Press HOME MENU to exit the menu.

r_ NOTE

•When the time has not been set, the RECTIMER indicator on the

front of the Media Receiver blinks.

•When the time has not yet been set, you cannot view channel banner

information, use auto channel select, and preset TV programs for

recording.

€_

6Select "D.S.T." (4-, 4./4,, then ENTER)

Adjustments and Settings "i

Sleep Timer

When the selected time elapses, tile Sleep Timer automatically

places the system into the standby mode.

Press SLEEP to select the desired time.

• The timer starts counting.

• Each time you press SLEEP, the selection is switched as

below:

30 ._ 60 ._ 90

t .__1

(cancel) Off_ 120 (minutes)

• The factory default is "Off".

_'_ NOTE

•Tocancel the Sleep Timer, select "Off" by pressing SLEEP,

• Five minutes before the selected time elapses, the remaining time

appears every minute,

You can also use the menu to set the Sleep Timen

1Press HOME MENU.

2Select "Sleep Timer". (÷/_1, then ENTER)

3Select the desired time. (÷/_1,-then ENTER)

4Press HOME MENU to exit the menu.

AV Selection

Select from tile five viewing options, depending on the current

environment (e.g., room brightness), the type of the current TV

program, or the type of images input from external equipment.

1Press AM SELECTION.

• The current AV Selection mode appears.

2Press AM SELECTION again before the displayed mode

disappears.

• ForAV source, the mode is switched in the order;

STANDARD, DYNAMIC, MOVIE, GAME, then USER.

• For PC source, the mode is switched between

STANDARD and USER.

You can also use the menu to change the options.

1Press HOME MENU.

2Select "Picture". (÷/_!, then ENTER)

3Select "AV Selection". (÷/_!, then ENTER)

4Select the desired option. (_1"/_1,then ENTER)

• STANDARD

For AM source

STANDARD Fora highly defined image in a normally

bright room

DYNAMIC Fora very sharp image with the maximum

contrast

This mode does not allow manualimage

quality adjustment.

MOVIE Fora movie

GAME Lowersimage brightness for easier viewing,

USER Allows the user to customize settings as

desired. You can set the mode for each input

source,

For PC source

STANDARD For a highly defined image in a normally

(factory default) bright room

USER Allows the user to customize settings as

desired. You can set the mode for each input

SOUrce,

5Press HOME MENU to exit the menu.

Adjustments and Settings

Picture adjustments

Adjust the picture to your preference for the chosen AV Contrast

Selection option (except DYNAMIC).

1Press HOME MENU. Brightness

Red

2 Select "Picture". (4_/,I ,then ENTER)

3Select an item to be adjusted. (÷/_1, then ENTER) Green

Blue

For PC source

For less contrast

For less brightness

For weaker red

For weaker green

For weaker blue

For more contrast

For more brightness

For stronger red

For stronger green

For stronger blue

For PC source, the following screen appears:

4Select the desired level. (÷/-_ then ENTER)

• When an adjustment screen is in display, you can also

change an item to be adjusted, by pressing _/_.

5 Press HOME MENU to exit the menu.

For AV source

Contrast For less contrast For more contrast

Brightness For less brightness For more brightness

Color For less color intensity For more color intensity

Tint Skin tones become Skin tones become

purplish greenish

Sharpness For less sharpness For more sharpness

NOTE

• To make settings for' PureCinema", "Color Temp", "MPEG NR",

"DNR', "CTI", and "DRE', select "Pro Adjust" in step 3, and then press

ENTER. For the subsequent procedures, see "Pro Adjust".

• To restore the factory defaults for all the items, press "_/_1, to select

"Reset" in step 3, and then press ENTER. A confirmation screen

appears. Press 41L/_Ir to select "Yes". and then press ENTER.

Pro Adjust

This system provides various advanced functions for optimizing

the picture quality.

1Press HOME MENU.

2Select "Picture". ('_/_ then ENTER)

3 Select "Pro Adjust". (÷/_k then ENTER)

4Select an item to be adjusted. ('_/_ then ENTER)

• You can select "PureCinema", "Color Temp",

"MPEG NR", "DNR", "CTI", or "DRE".

5 Select the desired parameter. (@/,1, then ENTER)

• For the selectable parameters, see the table.

Automatically detects a film-based source (originally encoded at

24 frames/second), analyzes it, then recreates each still film

frame for high-definition picture quality,

Selections Off Deactivates the PureCinema.

Standard Produces smooth and vivid moving

images (film specific) by

automatically detecting recorded

image information when displaying

DVD or 1080i HDTV images (e.g.,

movies) having 24 frames per

second.

ADV Produces smooth and quality moving

images (as shown on theater

screens) by converting to 72 Hz

when displaying DVD images (e,g,,

movies) having 24 frames per

second.

Remark You cannot select "Standard" when 480p or 720p

signals are being input.

Adjustments and Settings "i

Adjusts the color temperature, resulting in a better white

balance,

Selections High White with bluish tone

Mid Natural tone

Low White with reddish tone

_ld_[q_lt!

Eliminates mosquito noise from video images when a digital TV

channel is watched or a DVD is played, resulting in noise-free

images,

Selections Off Deactivates the MPEG NR,

On Activates the MPEG NR,

Eliminates video noise for clean crisp images, The DNR stands

for Digital Noise Reduction,

Selections Off Deactivates the DNR,

High Enhanced DNR

Mid Standard DNR

Low Moderate DNR

q/I

Provides images with clearer color contours, The CTI stands for

Color Transient Improvement,

Selections Off Deactivates the CTI.

On Activates the CTI.

Adjusts dark and bright porlions on images so that the contrast

between brightness and darkness becomes clearer,

Selections Off Deactivates the DRE.

On Activates the DRE.

Sound adjustments

Adjust the sound to your preference for the chosen AV

Selection option, See page 40,

1Press HOME MENU.

2Select "Sound". (÷/,1, then ENTER)

3Select an item to be adjusted. (÷/_F)

4Select the desired level. (÷/-_')

Treble For weaker treble For stronger treble

Bass For weaker bass For stronger bass

Balance Decreases audio from Decreases audio from

the right speaker the left speaker

5Press HOME MENU to exit the menu.

NOTE

•To restore the factory defaults for all the items, press 4F/_" to select

"Reset" irl step 3, and then press ENTER. A confirmation screen

appears. Press Al'/_lr to select "Yes", and then press ENTER.

Adjustments and Settings

FOCUS

This shifts the sound coming direction (sound images) upward

and produces clear sound contours.

1Press HOME MENU.

2Select "Sound". (÷/4, then ENTER)

3 Select "FOCUS". (_/_1,)

4Select the desired parameter. (÷/-k)

Off Deactivates the FOCUS.

(factory default)

On Activates the FOCUS.

Power Control

Power Control provides convenient functions for power saving.

Energy Save

You carl save power consumption by decreasing the picture

brightness, When you need not watch the screen and want to

enjoy only audio, you can also deactivate the screen,

1Press HOME MENU.

2Select "Power Control". (4_/_ then ENTER)

3Select "Energy Save". (_/_k then ENTER)

4Select "Save" or "Picture Off". (_/_k then ENTER)

5Press HOME MENU to exit the menu.

Front Surround

This provk_es three<_imensional sound effects and/or deep, rich

bass.

1Press HOME MENU.

2Select "Sound". (÷/4, then ENTER)

3Select "Front Surround". (4_/_)

4Select the desired parameter. (÷/-k)

Off Deactivates both the SRS and TruBass.

SRS Reproduces highly effective three-

dimensional sound.

TruBass Provides deep, rich bass using a new

(factory default) technology.

TruBass +SRS Provides both TruBass and SRS effects.

5Press HOME MENU to exit the menu.

_'_ NOTE

•_ (WOW) designates a status where the FOCUS is on and

TruBass + SRS has been selected for Front Surround.

• _ is a trademark of SRS Labs, Inc.

• WOW technology is incorporated under license from SRS Labs, Inc.

Standard Does not decrease picture brightness.

(factory default)

Save Decreases picture brightness to save power.

Picture Off Deactivates the screen to save power. To

restore the screen display, press any button

other than VOL 4-/- and MUTING.

This setting is not memorized by the system.

5Press HOME MENU to exit the menu.

NOTE

• You car/also select this function using the Home menu when the

input source is a PC.

No Signal off (AV mode only)

The system will be automatically placed into the standby mode

if no signal is received for 15 minutes,

1Press HOME MENU.

2Select "Power Control". (÷/,1, then ENTER)

3Select "No Signal off". (÷/,1, then ENTER)

4Select "Enable". (÷/,1, then ENTER)

Disable Does not place the system into the

(factory default) standby mode.

Enable Places the system into the standby mode if

no signal is received for 15 minutes.

5Press HOME MENU to exit the menu.

NOTE

• Five minutes before the system is placed into the standby mode, a

message appears every minute.

• The system may not be placed into the standby mode when noise

signals are present at the Media Receiver after a TV program finishes.

Adjustments and Settings "i

No Operation off (AV mode only)

Tile system will be automatically placed into the standby mode

when no operation is performed for three hours,

1Press HOME MENU.

2Select "Power Control". (4_/4, then ENTER)

;3 Select "No Operation off". (÷/4, then ENTER)

4 Select "Enable". (_/4, then ENTER)

Disable Does not place the system into the

(factory default) standby mode,

Enable Places the system into the standby mode if

no operation is performed for three hours.

Adjusting image positions

(AV mode only)

Adjust tile horizontal and vertical positions of images on the

Plasma Display,

1Press HOME MENU.

2Select "Option". ('1,/41, then ENTER)

3Select "Position". (÷/4k then ENTER)

4Select "H/V Position Adjust". (+/4, then ENTER)

5Press HOME MENU to exit the menu.

[] NOTE

Five minutes before the system is placed into the standby mode, a

message appears every minute,

Power Management (PC mode only)

The system will be automatically placed into the standby mode

when no signal is received from the personal computer,

1Press HOME MENU.

2Select "Power Control". (÷/4, then ENTER)

3Select "Power Management". (÷/4, then ENTER)

4Select "Model" or "Mode2". ('1"/4, then ENTER)

5Adjust the vertical position (41"/4,)or horizontal position

(÷/÷).

6Press HOME MENU to exit the menu.

r_ NOTE

•To restore the factory defaults for all the items, press _/4, to select

"Reset" in step 4, and then press ENTER. A confirmation screen

appears. Press "t_'/4, to select "Yes", and then press ENTER.

• Adjustments are stored separately according to input source,

Off

(factory default)

Model

No power management

•Places the system into the standby mode

when no signal is received from the

personal computer for eight minutes,

• Even when you start using the computer

and a signal is received again, the system

stays off,

• The system is switched on again by

pressing STANDBY/ON on the Plasma

Display or TV (_ on the remote control

unit.

Mode2 • Places the system into the standby mode

when no signal is received for eight

seconds.

• When you start using the computer and a

signal is received again, the system is

switched on.

• The system is switched on again by

pressing STANDBY/ON on the Plasma

Display or TV (.bon the remote control

unit.

5Press HOME MENU to exit the menu.

Adjustments and Settings _:,

Adjusting image positions and clock

automatically (PC mode only)

Use Auto Setup to automatically adjust positions and clock of

images coming from a personal computer.

1Press HOME MENU.

2Select "Option". (÷/_ then ENTER)

;3 Select "Auto Setup". (÷/_k then ENTER)

5Perform adjustment. (÷/-il, and 4L/_F)

•Use ÷/_ only when you adjust the vertical position

after selecting "H/V Position Adjust".

6Press HOME MENU to exit the menu.

r_ NOTE

•To restore the factory defaults for all the items, press _IL/_ to select

"Reset" in step 4, and then press ENTER. A confirmation sc/_een

appears. Press _IL/_Irto select "Yes". and then press ENTER.

€_

• Auto Setup starts.

4Press HOME MENU to exit the menu.

NOTE

• When Auto Setup is finished, "Auto Setup completed." appears.

• Even when "Auto Setup completed." appears, Auto Setup may have

failed, depending on conditions.

• Auto Setup may fail with a PC image composed of similar patterns or

monochrome. If not successful, change the PC image and try again.

• Be sure to connect the computer to the Media Receiver and switch it

on before starting Auto Setup.

Adjusting image positions and clock

manually (PC mode only)

Usually you can easily adjust the positions and clock of images

using Auto Setup. Use Manual Setup to optimize the positions

and clock of images when necessary.

1Press HOME MENU.

2Select "Option". (+/,IF then ENTER)

;3 Select "Manual Setup". (_/_1, then ENTER)

4Select an item to be adjusted. (_/_k then ENTER)

Adjustments and Settings "i

AV mode

4:3

/,r

iWIDE FULL I

•CINEMA .- ZOOM I

PC mode except for XGA signals

4:3

Dot by

Dot I

PC mode for XGA signals

4:3

lFULL2 *- FULLI I

Selecting a screen size

In single-screen mode, press SCREEN SIZE to change tile size

of the screen from among the sebctable options for the type of

video signals currently received,

• The selectable screen sizes differ depending on the types of

input signals,

AV mode

4:3

FULL

ZOOM

CINEMA

WIDE

For 4:3 "standard" pictures. A side bar appears on

each side,

For 16:9 squeeze pictures,

For 16:9 letterbox pictures. Bars may appear on the

top and bottom with some programs.

For 14:9 letterbox pictures. Bars may appear on the

top and bottom on some programs.

In this mode pictures are progressively stretched

toward each side of the screen.

PC mode except for XGA signals

4:3 Fills the screen without altering the input signal

aspect ratio.

FULL Full 16:9 screen display

Dot by Dot Matches input signal with same number of screen

pixels.

PC mode for XGA signals

(Ex,1024 x 768 input at PDP-5045HD)

4:3 Matches input signal with the same number of

screen pixels.

Optimized for 1024 x 768 display

FULL1 Full 16:9 screen display

Optimized for 1024 x 768 display

FULL2 For wide signal display

Use when displaying 1280 x 768 signal resolution.

r_ NOTE

•in 2-screen mode, press SCREEN SIZE to change the size of left

screen.

• The PC mode above is for the PDP-5045HD. For the PDP-4345HD the

number of panel pixels is different, so sigrlal processing and actual

viewing conditions will vary slightly.

• While watckfing High Definition TV broadcastirlg, pressing SCREEN

SIZE switches between FULL and WIDE.

• if you watch High Definition TV broadcasting with WIDE selected,

part of the screen (e.g,, images, graphic interface) can be missed, if

this is the case, select FULL.

Adjustments and Settings _,:,

Changing the brightness at both sides of

the screen (Side Mask)

With tile 4:3 screen size selected for tile AV mode, you carl

change the brightness of the gray side masks that appear at

both sides of the screen.

1Press HOME MENU.

2Select "Option". (÷/_1, then ENTER)

3Select "Side Mask". (_I'/,F then ENTER)

4Select the desired parameter. (÷/_1, then ENTER)

€_

Fixed Always sets the same brightness for the

(factory default) gray side masks.

Auto Adjusts the brightness of the gray side masks

according to the brightness of images.

5Press HOME MENU to exit the menu.

Language setting

You carl select a language to be used for on-screen display such

as menus from among three languages: English, French, and

Spanish.

1Press HOME MENU.

2Select "Option". (÷/_1, then ENTER)

3Select "Language". (4"/,!, then ENTER)

4Select a language. (÷/-b)

5Press HOME MENU to exit the menu.

Timer Presetting "}

Presetting TV programs using the timer

Using tile menu, you carl easily preset TV programs for

watching later (auto channel select), recording with a D-VHS

recorder, or recording via the supplied VCR controller.

With the power to the system left on, the Auto Channel Preset

automatically selects the preset TV program when its on-air

time comes. Then you will not miss an important TV program

when you are enjoying another TV program.

For the connections with a D-VHS recorder, see pages 54 and

55. For the connections with the supplied VCR controller, see

page 59.

r_ NOTE

Youcan make up to 32 presettings in total.

•In steps4 to 8. you can also press ÷/"i' to movethe cursor.

1Press HOME MENU.

2Select "Timers". (÷/_1, then ENTER)

3 Select a list number. (÷/,It then ENTER)

7Specify a channel number. (_/_1, then ENTER for each

digit)

8Select a recording device. (÷/_1, then ENTER)

• To preset for auto channel select, select "None".

9Press HOME MENU to exit the menu.

An alarm screen appears slightly before the preset timer is

activated. If watching a TV channel through antenna A or B in a

single-screen mode, the screen allows you to cancel the

presetting by pressing D.

Specify a date. (÷/_1, then ENTER)

• The selections include the days of the week (e.g.,

Mondays), "Weekdays", "Weekends", and "Everyday".

Selecting one of these will cause the timer to activate

periodically. The icons beside the list numbers have the following meanings.

Specify the start and end times. ('1_/'I, then ENTER for

each field)

6Select antenna A or B. (_/_1, then ENTER)

Preset for recording; no conflicts with other timers

exist.

Preset for auto channel select; no conflicts with

other timers exist.

Preset for recording; conflicts with other timers exist.

Preset for auto channel select; conflicts with other

timers exist.

Preset for recording; the timer start has been

delayed.

Preset for auto channel select; the timer start has

been delayed.

_._:i

Timer Presetting

NOTE

•If you set atimer to record a future digital program on a VCR, you

must first turn off Parental Control. Otherwise, you will record onJy a

black screen, See 'Temporarily deactivating the Parental Control" on

page 37.

• To change the TV program presetting, repeat the above procedure. To

cancel the presetting, press Dafter selecting a list number in step 4,

• Switch on the recording equipment at least 30 seconds before the

start of the preset program; otherwise recording will not be executed.

• When presetting for recording, finish the operations two minutes

(one minute for auto channel select) before the start of the program;

otherwise presetting may fail.

• Auto channel select is not executed when the system is in the

standby mode.

• Recording is net executed if recordable D-VHS tape is not present in

the D-VHS recorder when the preset program starts. This is also true

when a specified D-VHS recorder is not in connection.

• For recording with a VCR, confirm that the video output terminals on

the Media Receiver have been connected to the signal input

terminals on tbe VCR.

• Presettings become ineffective if the start time and the end time are

identical,

Priority rules for overlapped presettings

When preset TV programs are overlapped, the following three

rules are used to determine a higher priority, If more than one of

the three rules are met, the rules are applied in the order; 1,2,

then 3,

Rule 1: Presetting for recording is given a higher priority over

presetting for auto channel select,

Presetting for recording I

Presetting for auto

channel select

The shaded area is not executed,

Rule 2: If two presettings are overlapped, presetting with

earlier start time is given a higher priority, If two

presettings are sequential, the last portion of the first

program may not be recorded for 60 seconds (or

less) because recording of the second program is

started at the exact start time,

Program A I

Program B

The shaded area is not executed,

Rule 3: If presettings at the same start time are overlapped,

presetting with a higher list number is given a higher

priority,

Enjoying through External Equipment "}

You can connect many types of external equipment to your

Plasma Display System, like a DVD player, VCR, personal

computer, game console, and camcorden

To view images coming from external equipment, select the

input source using the INPUT buttons on the remote control

(page 14) or the INPUT button on the Plasma Display,

_CAUTION

•To protect all equipment, always turn off the system before

connecting to a DVD player, VCR, personal computer, game

console, camcorder, or other external equipment,

NOTE

•Refer to the relevant instruction manual (DVD player, personal

computer, etc,) carefully before making connections,

Watching a DVD image

Connecting a DVD player

Use the INPUT 1 terr-ninals when connecting a DVD player and

other audiovisual equipment,

AV cable (commercially available)

RMe%dii%er t _ Component Videocable

(rear view) t _ (commercially available)

S-Video cable

(commerciall, available)

DVD player

Displaying a DVD image

To watch a DVD image, press INPUT 1 on the remote control

unit or press INPUT on the Plasma Display to select INPUT1,

r'_ NOTE

• Refer to your DVD player instruction manual for the signal type,

• The iNPUT 1 terminals are checked for cable connections in the

order where; 1) Component Video, 2) S-Video, 3) Video.

• Connect external equipment to only terminals that are to be actually

used,

• You can also use the INPUT3 terminals when connecting onlywith

the Component Video output terminals on a DVD player.

Watching a VCR image

Connecting a VCR

Use the INPUT 2 terminals when connecting a VCR and other

audiovisual equipment,

Media Receiver (rear view)

VCR

Displaying a VCR image

To watch a VCR image, press INPUT 2 on the remote control

unit or press INPUT on the Plasma Display to select INPUT2,

r_ NOTE

• The INPUT2 terminals are checked for cable connections in the

order where; 1) S-Video, 2) Video.

• Connect external equipment to only terminals that are to be actually

used,

Enjoying through External Equipment

Using HDMI Input

Tile INPUT 1 and INPUT3terminals include HDMI terminals to

which digital video and audio signals can be input. To use the

HDMI terminal, activate the terminal and specify the types of

video and audio signals to be received from the connected

equipment. Forthe types of these signals, see the operation

manual that came with the connected equipment.

Before starting the menu, press INPUT 1 (or INPUT 3) on the

remote control unit or press INPUT on the Plasma Display to

select INPUT 1 (or INPUT 3).

1920* 1080i@59.94/60Hz

720* 480p@59.94/60Hz

1280* 720p@59.94/60Hz

720(1440)* 480i@59.94/60Hz

NOTE

•PC signals are not supported,

Connecting HDMI equipment

Media Receiver (rear view)

ID]'&"CTJl:'gt¢_

HDMI equipment

To activate the HDMI terminal:

1Press HOME MENU.

2Select "Option". (4=/4, then ENTER)

3Select"HDMI Input". (+/÷then ENTER)

4Select "Setting". (÷/+ then ENTER)

5Select "Enable". (+/4, then ENTER)

Disable Deactivates the HDMI terminal.

(factory default)

Enable Activates the HDMI terminal.

6Press HOME MENU to exit the menu.

To specify the type of digital video signals:

1Press HOME MENU.

2Select "Option". (÷/4, then ENTER)

3Select"HDMI Input". (+/_" then ENTER)

4Select "Video". (+/_1, then ENTER)

5Select the type of digital video signals. (+/_k then

ENTER)

• If you select "Auto", an attempt will be made to identify

the type of digital video signals when digital video

signals are received.

Auto Automatically identifies input digital video

(factory default) signals.

Color-1 Digital Component Video signals (4:2:2)

locked

Color-2 Digital Component Video signals (4:4:4)

locked

Color-3 Digital RGB signals locked

6Press HOME MENU to exit the menu.

NOTE

• If you select a parameter other than "Auto", make such a setting that

results in natural color.

• if no image appears, specify another digital video signal type.

• For the digital video signal types to be specified, check the operation

manual that came with the connected equipment.

To specify the type of audio signals:

1Press HOME MENU.

2Select "Option". (+/4, then ENTER)

3Select"HDMI Input". (÷/_1, then ENTER)

4Select "Audio". (4F/_k then ENTER)

5Select the type of audio signals. (÷/+ then ENTER)

• If you select "Auto", an attempt will be made to identify

the type of audio signals when audio signals are

received.

_Enjoying through External Equipment "i_

Auto Automatically identifies input audio

(factory default) signals.

Digital Accepts digital audio signals.

Analog Accepts analog audio signals.

6Press HOME MENU to exit the menu.

r_ NOTE

•If no sound is output, specify another audio signal type.

•For the audio signal types to be specified, check the operation

manual that came with the connected equipment.

• Depending on the equipment to be connected, you also need to

connect analog audio cables,

Enjoying a game console or watching

camcorder images

Connecting a game console or camcorder

Use the INPUT 4 terminals to connect a game console,

camcorder and other audiovisual equipment.

Media Receiver (front view)

AV cable

(commercially available)

S-Video cable

(commercially available)

r_ NOTE

• The INPUT 4 terminals are checked for cable connections in the

order where; 1) Component Video, 2) S-Video, 3) Video.

• Connect external equipment to only terminals that are to be actually

used,

Displaying an image of the game console or

camcorder

To watch an image coming from the game console or

camcorder, press INPUT 4 on the remote control unit or press

INPUT on the Plasma Display to select INPUT4.

Recording digital TV programs using a

VCR or DVD recorder

If you connect recording equipment such as a VCR or DVD

recorder to the MONITOR OUT terminals on the rear of the

Media Receiver, you can record, for example, digital TV

programs using the recording equipment.

You can also record digital TV programs more easily by using

the supplied VCR controller. Connect the VCR controller to the

VCR control terminal on the rear of the Media Receiver and

then position the controller so that its light emitting section

faces the remote control sensor on the recording equipment.

For more information, see page 59.

Avoiding unwanted feedback

You can prevent unwanted feedback from adversely affecting

the quality of images. Specify the output terminal whose output

is to be inhibited.

1Press HOME MENU.

2Select "Option". (÷/_1, then ENTER)

3Select "Monitor Out". (÷/4k then ENTER)

4Select "INPUT1 Prohibit", "INPUT2 Prohibit", "INPUT3

Prohibit", or "INPUT4 Prohibit". (÷/4k then ENTER)

5Press HOME MENU to exit the menu.

Game console/Camcorder

I."P_I

(Enjoying through External Equipment

Connecting a recorder

Media Receiver (rear view)

tAV cable

(commerciall _available)

S-Video cable

(commercially available)

VCR controller (for

presetting digital TV /

programs for recording)

Connecting other audio equipment

The digital audio output terminal (optical) on this system carl m

output Dolby Digital signals, Using an optical digital cable,

connect an AV receiver to the digital audio output terminal

(optical) on the rear of the Media Receiver, This allows audio _"

such as digital TV broadcasting to be played in high quality, =r

If your AV receiver does not have a digital audio input terminal

(optical), connect the MONITOR OUTterminals (AUDIO) on the

rear of the Media Receiver to the audio input terminals on the

AV receiver,

NOTE

•When using the digital audio output terminal (optical), you need to

make settings depending on your AV receiver. For more information,

see the instruction manual that came with the AV receiver,

Connecting an AV receiver

Media Receiver (rear view)

VCR or DVD recorder

r'_ NOTE

• About the MONITOR OUT terminals

The MONITOR OUT terminals cannot output the following signals:

1 Video signals input from the COMPONENTVIDEO terminal

2 Video signals from a personal computer

3S-Video signals when a conventional ]M channel is being received

4 S-Video signals when Video signals (INPUT 1,2, and 4) are being

input

5Digital video and audio signals from the HDMI terminals

• When watching images played back on a VCR or DVD recorder

connected to the MONITOR OUT terminals, select an input source

(e.g., TV channel reception) on the recording equipment other than

external input sources. Selecting an external input source may result

in distorted images or noise.

• Analog broadcasting signals are not sent to the MONITOR OUT

(S-VIDEO) terminal. This is also true of composite signals coming

from INPUT 1,2, or4,

AV receiver

Enjoying through External Equipment

Switching the optical audio signal type

Set up for the DIGITAL AUDIO output terminal (OPTICAL),

depending on your AV receiver,

1Press HOME MENU.

2Select "Option". (÷/,I, then ENTER)

3 Select "Digital Audio Out". (_/_1, then ENTER)

4Select "Dolby Digital" or "PCM". (_/_1, then ENTER)

When connecting a single D-VHS recorder

Media Receiver (rear view)

IDT_m1=F.gm11

PCM Always outputs in the PCM format

(factory default) regardless of the types of signals.

Dolby Digital For Dolby Digital encoded signals, outputs in

the Dolby Digital format. For PCM encoded

signals, outputs in the PCM format.

5Press HOME MENU to exit the menu.

Watching a D-VHS image

What is i.LINK?

i,LINK is a digital serial interface for handling digital video,

digital audio, and other data in two directions, i,LINK is Sony's

term for the IEEE 1394 data transport bus, Digital AV equipment

compatible with i,LINK can be connected using a single i,LINK

cable, The i,LINK interface allows this PDP system to control

one of up to two i,LINK compatible devices (in connection) that

can be identified,

Which i.LINK devices are connectable?

For i,LINK devices, this system supports only D-VHS recorders,

The i,LINK terminals on this system cannot be connected with

other equipment such as DVD recorders, digital video cameras,

personal computers, and PC peripheral devices because of

differences in the specifications,

What can be recorded through i.LINK?

With D-VHS recorders connected to this system through i,LINK,

you can record only digital TV programs, You cannot record

conventional TV channels nor contents coming from external

input sources and personal computers,

Connecting D-VHS recorders

Usethe i,LINK terminals when connecting D-VHSrecorders,

i,LINK cable

(commercially available)

To use i,LINK, you need toconnect only an i,LINK cable;

you need not connect cables to

the video and audio terminals,

D-VHS recorder

When connecting two D-VHS recorders

You can connect two D-VHS recorders directly to the i,LINK

terminals on the rear of the Media Receiver,

Media Receiver

i.LINK cables

D-VHS recorder

b"_!

Enjoying through External Equipment

Using i,LINK cables you can also connect up to two

D-VHS recorders in a daisy chain,

i.LINK cable

D-VHS recorder

Precautions about i.LI NK, connections

•Use $400 i,LINK cables that have 4-pin plugs and are shorter

than 3,5 m (11,48 feet),

• Some i,LINK devices cannot relay data when their power is

off,

• Do not make the following loop connections:

Media Receiver D-VHS recorder

Displaying a D-VHS image

To watch a D-VHS image, press i.LINK on the remote control

unit or press INPUT on the Plasma Display to select i,LINK,

Useful and important notification

Useful information

• D-VHS recorders connected through i,LINK can play back

digital TV programs recorded using this system,

• D-VHS recorders connected through i,LINK can record only

digital TV programs, Using i,LINK, those recorders cannot

record conventional TV channels nor contents coming from

external input sources,

• This system can be simultaneously connected with up to two

D-VHS recorders that support i,LINK, You can control one of

these D-VHS recorders (basic functions only),

• Some D-VHS recorders connected through i,LINK may not

allow this system to control through the control panel screen

or to display images and output sound,

• To record digital TV programs using connected D-VHS

recorders, use D-VHS tape, You cannot use VHS tape nor

S-VHS tape,

• Some D-VHS recorders connected though i,LINK may not

allow this system to play back images and sound recorded on

VHS tape, S-VHS tape, or (if with analog signals) D-VHS tape,

If this is the case, connect the analog output terminals on the

D-VHS recorder to INPUT 1,2, 3, or 4 terminals on this

system, See page 50,

• This system supports the Digital Transmission Content

Protection (DTCP) technology, The DTCP is a copy protection

technology that presents data coding and device

authentication,

• i,LINK may not allow copy-restricted video, audio, and other

data to be copied from one i,LINK device to another, It also

may not allow video, audio, and other data to be transferred

with equipment that does not support the DTCR

Precautions

• While one D-VHS recorder connected through i,LINK is

recording or playing back, do not switch on or off the other

connected D-VHS recorder (not in use) or do not connect or

disconnect the i,LINK cable from that D-VHS recorder, Doing

so can result in image and sound interruption,

• Some D-VHS recorders that support i,LINK cannot relay data

when their power is off, Check the instruction manual that

came with your D-VHS recorden This system allows you to

change the setting for data relay in the standby mode, See

"Setting up for i,LINK standby" on page 57,

Enjoying through External Equipment

Setting up for controlling a D-VHS recorder

You carl operate the connected D-VHS recorder from tile

Plasma Display that shows the control panel screen. After

making the connections, use the menu to specify the model of

the D-VHS recorder to be operated. You can operate only a

single D-VHS recorder from the Plasma Display.

1Press HOME MENU.

2Select "Tuner Setup". (4F/4, then ENTER)

3Select "Recorder Setup". (÷/-b then ENTER)

4Select "i.LINKSetup". (÷/,l, then ENTER)

5Select "i.LINK List". (÷/4k then ENTER)

6Select the D-VHS recorder model to be operated.

(÷/4, then ENTER)

Editing the i.LINK list

Tile i.LINK list shows all devices connected through i.LINK

interfaces. In this list, you can change the name or order of

devices or delete device information.

1Press HOME MENU.

2Select "Tuner Setup". (4=/4, then ENTER)

3Select

4Select

5Select

6Select

"Recorder Setup". (÷/._ then ENTER)

"i.LINK Setup". (4=/41, then ENTER)

"i.LINK List". (4=/4, then ENTER)

the desired device. (÷/4k)

7Press Ato select "Connect".

8Press HOME MENU to exit the menu.

r_ NOTE

•The following information appears at the right end of the i.LINK list to

indicate the connection status of the D-VHS recorders:

Control: Data connection with the D-VHS recorder has been

established and the recorder is ready for control,

Link: The D-VHS recorder has been physically con-

nected, and can be controlled if it is selected for

controk

--: Currently not physically connected

• When connected to any device other than a D-VHS, the device is not

listed in the i,LINK List.

The following procedure differs depending on what you want to

perform.

To change the name of a device:

7Press Bto select "Rename".

8Enter up to 7 characters using ÷/4k, ÷/-b and ENTER.

9Press A.

10 Press HOME MENU to exit the menu.

To change the order of devices:

7Press Cto select "Move".

8Select the new desired position. (÷/4, then ENTER)

• The selected device is moved to the selected position.

9Press HOME MENU to exit the menu.

To delete information about a device:

7Press Dto select "Delete".

• A confirmation message appears.

• A warning message appears if the selected device has

been preset for recording with the timer or if its power

is on. If this is the case, you cannot delete the device

that you have selected.

8Press Ato execute the deletion.

9Press HOME MENU to exit the menu.

Enjoying through External Equipment

Setting up for i.LINK standby

Use tile following procedure to enable data transfer between

multiple i,LINK devices even when the system is in the standby

mode,

1Press HOME MENU.

2Select "Tuner Setup". (4=/_ then ENTER)

3Select "Recorder Setup". (÷/_ then ENTER)

4Select "i.LINK Setup". (÷/_k then ENTER)

5Select "i.LINK Standby". (÷/_ then ENTER)

6Select "Enable". (÷/_ then ENTER)

7Press HOME MENU to exit the menu.

r_ NOTE

• With "Enable" selected, the system relays data between multiple

i,LINK devices even when in the standby mode; the i,LINK circuits

are energized in that mode,

In standby mode

i.LINK device Media Receiver i.LINK device

No data relay

Operating the control panel screen

The control panel screen appears when you press i.LINK, It

disappears when you press i.LINK again, Toselect a button on

the control panel screen, press 4k/_kor ÷/_, and then press

ENTER on the remote control,

1Shows the current status of the D-VHS recorder,

2Shows the name of the currently selected device,

3Shows counter time output by the D-VHS recorder

4Shows the manufacture name of the D-VHS recorder to be

operated,

5Shows the model name of the D-VHS recorder to be

operated,

6Shows the type of inserted video tape; D for D-VHS, S for

S-VHS, and no display for VHS,

7Appears when any tape has been inserted,

8Appears when the inserted tape has been write protected,

The inserted tape cannot be used for recording when this

indicator appears,

9Appears when the D-VHS recorder has been preset for

recording and is in the standby mode,

10 Switches on and off the D-VHS recorder,

11 Starts recording,

12 Rewinds to the start of the current program,

13 Rewinds the tape,

14 Pauses the tape,

15 Stops the current tape motion,

16 Starts playing back,

17 Forwards to the start of the next program,

18 Forwards the tape,

19 Exits the control panel screen and displays the i,LINK Setup

menu,

20 Allows you to change the D-VHS recorder to be operated,

After pressing this button, press +/_k to select the desired

model from the list, and then press ENTER,

NOTE

• If no i.LINK device has been connected, "No i.LINK devices are

connected." appears, tf this is the case, connect i.LtNK devices.

• If none of the connected equipment has been supported for control,

you cannot execute control,

Enjoying through External Equipment ")

Watching an image from a personal

computer

Connecting a personal computer

Use the PC terminals to connect a personal cornpute_

[] NOTE

•The PC input terminals are DDC2B_cornpatible.

• Plug & Play may not correctly function, depending on personal

computers in use,

Media Receiver (front view)

pl3]'5 c_luestere° mi n i- I _t

(commercially available)_

Personal computer

RGB cable

(commercially available)

Displaying an image from a personal computer

When connecting to a personal computer, tile input signal type

is automatically identified, If the personal computer image does

not come in clearly, you may need to use Auto Setup in the

menu, See page 45,

To watch an image coming from the personal computer, press

PC on the remote control unit or press INPUT on the Plasma

Display to select "PC",

NOTE

• The PC terminals cannot be used for audiovisual equipment.

Signal names for 15-pin mini D-sub connecter

(front view)

4Not connected

5Not connected

6GND (ground)

7GND (ground)

8GND (ground)

9+5V

10 GND (ground)

11 Not connected

12 SDA

13 HD

14 VD

15 SCL

r_ NOTE

• A Macintosh adaptor may be required for use with some Macintosh

computers,

Computer compatibility chart

720 x 400 70 Hz

640 x 480 60 Hz

65 Hz Macintosh 13" (67 Hz)

72 Hz

75 Hz

800x 600 56 Hz

60 Hz

72 Hz

75 Hz

832 x 624 74.5 Hz Macintosh 16"

1024 x 768 60 Hz

70 Hz

75 Hz Macintosh 19"

1280x 768 56 Hz

60 Hz

70 Hz

{Enjoying through External Equipment

Connecting the VCR controller

Connect the supplied VCR controller to the Media Receiver. This

allows you to preset digital TV programs for recording; see page

48. When the specified time comes, the system in the standby

mode is automatically switched on and the specified TV

program is recorded using the connected VCR or DVD recorder.

NOTE

• Make sure to leave the VCR power on when presetting TV programs

for recording with the VCR controller.

• Be sure to fh'mly connect the VCR controller to the VCR control

terminal on the rear of the Media Receiver. if you have mistakenly

connected it to the CONTROL iN or CONTROL OUT terminal, remote

control or other operations may be disabled,

Use the following procedure to set the manufacture of the

recording equipment:

Press HOME MENU.

Select "Tuner Setup". (÷/_1, then ENTER)

Select "Recorder Setup". (4-/'I' then ENTER

Select "VCR Setup". (+/+ then ENTER)

Select the manufacture of the recording equipment.

(+/,1, then ENTER)

Media Receiver (rear view)

(Once you have positioned the

VCR controller, secure with the

_ supplied tape,)

VCR or DVD

recorder

Position the light

emitting section

on the VCR

controller cable

so that it faces

the VCR.

Remote control sensor

• The screen for recording test appears.

6Check that the power to the recording equipment is on,

and insert tape into the slot.

• Insert tape you think it all right to erase its contents.

The contents will be erased because Rec and Stop

codes are output in the test.

• Check that the light emitting section on the VCR

controller cable faces the recording equipment.

7Press A to execute recording test.

• If the recording equipment fails to start and stop

recording, check and change the specified recording

equipment manufacture.

8Press Ato select "Yes, Store Setting".

9Press HOME MENU to exit the menu.

_'_ NOTE

• Even if you correctly specify the manufacture of the recording

equipment, control of some models may be disabled.

• Perform the recording test when the recording equipment is not in

recording standby or is not recording.

• The recording test takes approximately 10 seconds.

• The PIONEER has been set as the factory default.

Enjoying through External Equipment

[._l]

The lists of controllable recording

equipment manufactures

Admiral Harley Davidson Philco

Advantz Harman/Kardon Philips

Adventura Harwood Pilot

Aiko Headquarter Pioneer

Aiwa Hitachi Portland

Akai JVC Profitronic

American High Jensen Proscan

Asha KEC Protec

Audiovox KLH Pulsar

Beaumark Kenwood Quarter

Bell & Howell Kodak Quartz

Broksonic LXI Quasar

CCE Lloyd's RCA

Calix Logik Radio Shack

Canon MEI Radix

Capehart MGA Randex

Carver MGN Technology Realistic

Cineral MTC Ricoh

Citizen Magnasonic Runco

Colt Magnavox STS

Craig Magnin Salora

Curtis Mathes Marantz Samsung

Cybernex Marta Sanky

Daewoo Matsushita Sansui

Daytron Memorex Sanyo

Denon Minolta Scott

Dynatech Mitsubishi Sears

Electrohome Motorola Setup

Electrophonic Multitech Sharp

Emerex NAD Shintom

Emerson NEC Shogun

Fisher Nikko Singer

Fuji Nikon Sony

Funai Noblex Sylvania

GE Olympus Symphonic

Garrard Optimus TMK

Go Video Optonica Tatung

GoldStar Orion Teac

Gradiente Panasonic Technics

Grundig Penney Teknika

HI-Q Pentax Thomas

Toshiba

Totevision

Unitech

Vector

Vector Research

Video Concepts

Videosonic

Wards

White Westinghouse

XR-IO00

Yamaha

Zenith

Some modes of the listed

manufactures may not allow

control through the VCR

controller,

Enjoying through External Equipment

Connecting control cords

Connect control cords between the Media Receiver and other

PIONEER equipment having the _ logo, You can then operate

the connected equipment by sending commands from its

remote control unit to the remote control sensor on the Media

Receiven

After the CONTROL IN terminals have been connected, the

remote control sensors on the connected equipment do not

accept commands from the remote control units, Face the

remote control units to the remote control sensor on the

Plasma Display when operating the connected equipment,

NOTE

• Make sure tbat the power is turned off when making connections.

• Complete all component connections before making control cord

connections,

About SR+

Tile CONTROL OUT terminal on the rear of tile Media Receiver

supports SR+ that allows linked operations with a PIONEER

AV receiven SR+ presents functions such as the input switch

linkage operation function and the DSP surround mode display

function, For more information, see the instruction manual that

came with the PIONEER AV receiver supporting SR+,

_J NOTE

• While in connection through SR+, the volume onthis system is

temporarily minimized,

Media Receiver (rear view)

€_

The control cables (commercially available) are mono sound

cables with mini plugs (no resistance),

JUseful Remote Control Features "

I/i

Learning function of the remote control

unit

You can operate the connected AV products (AV Receiver, Cable

Box, SAT tuner, VCR, DVD, DVD recorder, LD) using the learning

function of your remote control unit. This remote control unit

has a function that can memorize each remote control code.

/////////////////////////////////////////

Remote control Remote control of

(Supplied accessory) AV product

Presetting manufacture codes

1Slide the Mode switch to match the device to which you

want to preset the remote control signal.

2Press EDIT/LEARN and 1at the same time.

• The LED flashes.

3Press 0-9 to enter the manufacture code. See page 63.

• Preset mode is finished once the LED no longer lights

up.

NOTE

•To exit the Edit mode halfway, press EDIT/LEARN again.

• If the Mode switch selection is changed when in the Edit mode, the

Edit mode is cancelled.

• If no operation is performed for more than one minute, the Edit mode

is cancelled.

• When you enter a code not listed, the LED flashes quickly.

• If the table on page 63 does not include your desired manufacturer or

the remote control does not work. you can make the memory learn

its signal bythe Learn mode.

• The initial mode is "000" (PIONEER).

Using the learning function

1Slide the Mode switch to match the device whose remote

control signal you want to be learned.

2Press EDIT/LEARN and 2 at the same time.

• The LED flashes.

3Press a button to be learned.

• The LED lights up.

• For the functions that can be learned, see pages 64 to

68.

• When learning is finished, the LED starts flashing

again.

4Press EDIT/LEARN again to exit the Learn mode.

NOTE

• Toexit the Learn mode halfway, press EDIT/LEARN again.

• If the Mode switch selection is changed when in the Learn mode.

the Learn mode is cancelled.

• If no operation is performed for more than one minute, the Learn

mode is cancelled.

• It takes about 2 seconds to finish code transmission. Do not interrupt

it halfway. Wait until the LED flashes again.

• You can reset all learned codes to tbe factory defaults. When not in

the Learn mode, press and held TV (_, and ther/press :_'- and

VOL + (RECEIVER section) at the same time.

Useful Remote Control Features )

Manufacture codes

000 PIONEER1(CABLE) PIONEER PIONEER(DVD) 053

001 PIONEER2(CABLE) FISHER PANASONIC(DVD) 054

002 JERROLD1(CABLE) FISHER2 SAMSUNG(DVD) 055

003 JERROLD2(CABLE) FISHER3 SONY(DVD) 056

004 JERROLD3(CABLE) GOLDSTAR TOSHIBA(DVD) 057

005 JERROLD4(CABLE) HITACHI JVC(DVD) 058

006 JERROLDS(CABLE) HITACHI2 PIONEER(DVD-RECORDER) 059

007 JERROLD6(CABLE) HITACHI3 PIONEER2(DVD-RECORDER) 060

008 JERROLD7(CABLE) MAGNAVOX2 PIONEER3(DVD-RECORDER) 061

009 JERROLD8(CABLE) MITSUBISHI PANASONIC(DVD-RECORDER) 062

010 JERROLD9(CABLE) MITSUBISH[2 PANASONIC2(DVD-RECORDER) 063

011 JERROLDIO(CABLE) MITSUBISH[3 PANASONIC3(DVD-RECORDER) 064

012 S.A,1(CABLE) MITSUBISHI4 PHILIPS(DVD-RECORDER) 065

013 S.A,2(CABLE) MITSUBISH[5 SHARP(DVD-RECORDER) 066

014 S.A,3(CABLE) MITSUBISHI6 SHARP2(DVD-RECORDER) 067

015 S.A,4(CABLE) PANASONIC TOSHIBA(DVD-RECORDER) 068

016 ZENITH1(CABLE) PANASONIC2 TOSHIBA2(DVD-RECORDER) 069

017 ZENITH2(CABLE) PANASONIC3 070

018 ZENITH3(CABLE) RCA 071

019 RCA2 072

020 PIONEER(SAT) RCA3 PIONEER(LD) 073

021 RCA1(SAT) SANYO KENWOOD(LD) 074

022 RCA2(SAT) SANYO2 PANASONIC1(LD) 075

023 SONY(SAT) SANYO3 PANASONIC2(LD) 076

024 SHARP PHILIPS(LD) 077

025 SHARP2 RCA(LD) 078

026 SHARP3 SONY(MDP) 079

027 SONY(BETA) SONY(LD) 080

028 SONY(VHS) 081

029 SONY(Rmm) 082

030 TOSHIBA 083

031 jVC 084

032 JVC2 085

033 JVC3 086

034 JVC4 087

035 JVC5 088

036 ZENITH 089

037 MITSUBISHI(J-3) 090

038 SHARP(J-2) 091

039 PANASONIC(J-3) 092

040 TOSHIBA(J-3) 093

041 GRANDIENTE 094

042 AKAI 095

043 PIONEER2 096

044 SANYO4 097

045 MATSUI 098

046 AIWA 099

047 ALBA81 100

048 BUSH 101

049 THOMSON 102

050 BAIRD 103

051 TELEFUNKEN 104

052 ALBA

Grundigl

Grundig2

Grundig3

SONY2

SONY3

SONY4

RCA4

PHILIPS

PHILIPS2

PHILIPS3

PHILIPS4

PHILIPS5

PHILIPS6

SAMSUNG

SAMSUNG2

SAMSUNG3

SAMSUNG4

SAMSUNGS

SAMSUNG6

MARANTZ

MARANTZ2

GE2

GE3

YAMAHA

YAMAHA2

YAMAHA3

YAMAHA4

CURTIS_MATHIS

CURTIS_MATHIS2

CURTIS_MATHIS3

FUNAI

ADMIRAL

KENWOOD

KENWOOD2

KENWOOD3

NEC

NEC2

NEC3

NEC4

WARDS

WARDS2

WARDS3

WARDS4

MEMOREX

MEMOREX2

JC_PENNY

JC_PENNY2

JC_PENNY3

JC_PENNY4

JC_PENNY5

JC_PENNY6

=I"

E_q

rUseful Remote Control Features "

( /i

Using the remote control unit to control

other devices

O-

MUTING

Mode switch

(with "TV"

selected)

Receiver control buttons

When a Pioneer receiver is connected to the display, the

receiver can be operated using buttons 1 to 3,

When a non-Pioneer receiver is connected to the display, the

signals for 1 to 3 must first be Uearned before operating, See

page 62,

1 RECEIVER (._ (STANDBY/ON)

Turns the receiver power on and off.

2 RECEIVER INPUT

Selects tile input source connected to tile receive_

3 RECEIVER VOL +/-

Adjusts the receiver volume level. Press VOL + to

increase the volume and VOL - to decrease it.

r_ NOTE

•(RECEIVER) D_ MUTING

Allows the remote control unit to learn receiver's mute signal. Use

this button when the mode switch is set to a position other than TV,

• The colol'-highlighted buttons on the remote control can barn the

control signal from another device's remote control,

[,-_!

Useful Remote Control Features

Elm

0000

Pioneer

_. PLASMA DISPLAY )

Mode switch

(with "CBL/SAT"

selected)

Cable control buttons

When the Mode switch is set to CBL/SAT, the cable converter

connected to the display can be operated using 1 to 5,

Cable converters made by other manufacturers and not preset

can also be operated using the remote control unit if 1 to 5

have learned the functions, See page 62,

1 0-9

Press a button (or buttons) that corresponds to tile

channel that you want to watch.

2 CH+/-

Press CH + or CH-to tune in a higher or lower channel.

3 SOURCE _,_

Turns the cable converter power on and off,

4 CH ENTER*

Fix tile selected channel with tile direct channel selection

buttons.

5CH RETURN*

Press to switch between the current channel and tile

channel you were watching immediately before.

* Some manufacturers do not preset CH ENTER and

CH RETURN, Use these buttons to learn if necessary,

NOTE

•CABLE and SAT cannot be selected at the same time.

•The color-highlighted buttons on the i_emote control can learn the

control signal from another device's remote control.

¢Q

1/Useful Remote Control Features "

L/i

FAVORITE OH

000•

SOURCE

_'PLASMA DISPLAYS)

Mode switch

(with "CBL/SAT"

selected)

SAT control buttons

When the SAT is preset by tile learning function of the remote

control, the remote control unit buttons will function as shown

below.

• When the Mode switch is set to CBL/SAT, sateUUitebroadcast

tuners made by other manufacturers and not preset can also

be operated with the remote control unit if 1 to 8 have

learned the functions. See page 62.

1 0-9

Press a button (or buttons) that corresponds to the

channel that you wish to watch.

2 CH+/-

Press CH + or CH -to tune in a higher or lower channel.

3 ENTER, ÷/,I,/÷/..).

ENTER: Press to activate the selected function.

'_'/_l,/÷/-b: Press the button to select items on the SAT

GUIDE screen or SAT MENU screen.

4 SAT INFO

When this button is pressed, information on satellite

broadcasting will appear.

• Use this button to learn if necessary.

5 SOURCE (_

Turns the Satellite broadcast tuner power on and off.

6 CH ENTER

Fix the selected channel with tile direct channel selection

buttons.

• Use this button to learn if necessary.

7 SAT MENU

When this button is pressed, the satellite broadcasting

menu screen will appear.

8 SAT GUIDE

When this button is pressed, the satellite broadcasting

guide screen will appear.

r_ NOTE

•CABLEand SATcannot be selected at the same time.

• The color-highlighted buttons on the remote control can learnthe

control signal from another device'sremote control.

[.'_.'1

Useful Remote Control Features )

i_i_i)#'_iiii_¢_':'_:::_iiI

Mode switch

(with "VCR"

selected)

VCR control buttons

When tile VCR is preset by tile learning function of the remote

control, the remote control unit buttons will function as follows

when the Mode switch of the remote control unit is set to

VCR,

• When the input selector button having the same number as

the input terminal connecting the VCR is pressed, the VCR

can be operated using 1to 8,

• VCR made by other manufacturers and not preset can also

be operated using the remote control unit if 1 to 8 have

learned the functions, See page 62,

1 CH+/-

Press to select the channel of the TV tuner on the VCR.

2 • (PLAY)

Selects playback.

3 44 (REW)

Rewinds the tape and allows picture search.

4 SOURCE (_

Turns tile power of tile VCR on and off.

5 II (PAUSE/STILL)

Sets pauses and still pictures.

6l=-ll,_ (FF)

Rapidly advances the tape and allows picture search.

7• (REC)

Starts recording.

8• (STOP)

Stop tape transport.

_J NOTE

• The color-highlighted buttons on the remote control can learn the

contl'ol signal from another device's remote control,

E_q

/Useful Remote Control Features "

L/i

i{iiiiiil lli2211i_iiii] ¸ !iii211!i

ill!_iiT_iiiiiiii]_ ,._" " ,_,ii,i]i]i

(ii _ <¸ ;i iJ;i

"L, ,? _{,, ,{ '_ ,'

Mode switch

(with "DVD/

DVR" selected)

DVD/DVR control buttons

When tile DVD/DVR is preset by the learning function of the

remote control, the remote control unit buttons will function as

follows when the Mede switch of the remote control unit is set

to DVD/DVR.

• When the input selector button having the same number as

the input terminal connecting a DVD player or DVD recorder

is pressed, these players can be operated using 1 to 12.

• DVD players or DVD recorders made by other manufacturers

and not preset can also be operated using the remote control

unit if 1 to 12 have learned the functions. See page 62.

1 CH +/- (DVD recorder only)

Press to change the channel of the tuner built in the DVD

recorder.

2 RETURN

When the DVD menu is in display, press to restore the

immediately previous screen.

3 • (PLAY)

Selects playback.

4_1_1 (SCAN)/141_I (CHAPTER SEARCH)

Continue pressing to go backward.

Pressing quickly once takes you to the start of the chapter

currently playing. Each time you press it, you move back

to the start of the previous chapter.

5 SOURCE (._

Turns the power of the DVD player or DVD recorder on

and off.

6II (PAUSE/STILL)

Sets pauses and still pictures.

7 SAT/DVD MENU (DVD, DVD recorder)

When this button is pressed, the DVD menu will appear.

8ENTER, ÷/÷/÷/_ (DVD, DVD recorder)

ENTER: Press to activate the selected function.

÷/,I,/÷/,_: Press the button to select items on the DVD

MENU screen.

9 DVD TOP MENU (DVD, DVD recorder)

When this button is pressed, the DVD top menu will

appear.

10 I_1_ (SCAN)/I_I_I (CHAPTER SEARCH)

Continue pressing for fast forward.

Pressing quickly once takes you to the start of the next

chapter. Each time you press it, you move ahead to the

start of the next chapter.

11 O (REC)

Starts recording.

12 • (STOP)

Playback stops when pressing once.

With some DVD players or DVD recorders, pressing the

button twice may open the disc tray.

11, 12 REC STOP

Press and hold O, and then press this button to stop

recording. This operation is true of only Pioneer DVD

recorders.

r'_ NOTE

•The DVD player or DVD recorder cannot be selected at the same

time.

• The color-highlighted buttons on the remote control can learn the

control signal from another device's remote control,

[.-f:]

Appendix

Troubleshooting

Ib"L_.'I_,, ,"_1_1.'Ir'_'f_ Ill i c.3,

•No power. • Make sure the Plasma Display and the Media Receiver are connected correctly. (See page 18.)

• Is the power cord disconnected? (See page 23.)

• Has the main power been turned on? (See page 24.)

• Check if you pressed TV _ on the remote control unit. (See page 24.)

If the indicator on the system lights up red, press TV dO.

• Green and red rectangles appear on •Check if the system cable has been disconnected or almost disconnected? (See page 18.)

the screen alternately.

• The system cannot be operated. • External influences such as lightning, static electricity, etc., may cause improper operation.

In this case, operate the system after first turning the power of the Plasma Display and the Media

Receiver, or unplugging the power cord and re-plugging it in after 1or 2 minutes.

• Remote control unit does not

operate,

• Is the Mode switch set correctly? Slide it to the TV setting position. (See page 14.)

• Are batteries inserted with polarity (+, -) aligned? (See page 20,)

• Are batteries worn out? (Replace with new batteries,) (See page 20.)

• Operate the remote control unit while pointing it toward the remote control sensor on the Plasma

Display, (See page 20.)

• Are you using it under strong or fluorescent lighting?

• Is a fluorescent light illuminated near the remote control sensor?

• No image and audio is )resented. • Check if the input source for video or PC has been unintentionally selected although you want to

watch a TV channel. (See page 25.)

• Check if you have activated the Parental Control function. (See page 33.)

Enter a password to temporarily cancel the Parental Control function, (See page 3Z)

• No picture. • Is connection to other components correct? (See pages 50 to 58,)

• Is a non-compatible PC signal being input? (See page 58.)

• Is picture adjustment correct? (See page 41 .)

• Audio is output but no image is • Check if you have selected "Picture Off" for Energy Save. With this option selected, the screen is

presented, deactivated; only audio is output, To restore the screen display, press any button other than

VOL +/- and MUTING, (See page 43.)

• Images are presented but no audio • Check if you have selected the minimum volume. (See page 26.)

is output. • Check if you have muted sound, (See page 26,)

• When using a video or PC input source, check that the audio terminal is also in connection,

(See pages 50 to 54 and 58.)

• Sound is reversed between the right • Check if the speaker cable connections have been reversed between the right and left or if the

and left. speaker cable from either speaker has been disconnected. (See pages 12 and 18.)

• Sound is output from only a single • Has the balance been correctly adjusted? (See pages 42 and 43.)

speaker.

• Picture is cut off. • Is the image position correct? (See pages 44 and 45.)

• Has the correct screen size been selected? (See page 46.)

• Strange color, light color, dark or • Adjust the picture tone. (See page 41 .)

color misalignment. • Is the room too bright? The picture may look dark in a room that is too bright.

• Power is suddenly turned off. • Is the sleep timer set? (See page 40.)

• Check the power control setting. (See pages 45 and 44.)

• The system's internal temperature has increased. Remove any objects blocking vent or clean.

(See pages 15 and 16.)

SDO4 Powering off. Internal temperature too high. Check if the ambient temperature of the Plasma Display is high.

Check temperature around PDR

8DOS Powering off, Internal protection circuits activated, Check the speaker cable connections between the Plasma Display

Is there a short in speaker cable?and the speakers,

SD11 Powering off. Internal temperature too high. Check if the ambient temperature of the Media Receiver is high.

Check temperature around media receiver.

¢Q

, Appendix }

The vkJeo program that you watch may be high definition (HD) or standard definition (SD), This Plasma Display is designed to scale

to each type of definition properly, If the video program's definition type changes while a menu window is displayed on the screen

(for example: HD_SD or SD_HD), the menu size may temporarily shrink or enlarge until the scaling is completed, This may

happen, for example, when you switch between television and an external digital video recorder (D-VHS), or when your recorded

program switches between different definition types, while the on-screen menu is being shown,

If this happens, the menu will return to its normal size after two to three seconds, This action is normal, and does not indicate a

problem with your Plasma Display system,

Er]

Append ix

This product in part uses "OpenSSl.:' software.

To the extent the OpenSSL software is being used, the following notification applies:

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions

are met:

1, Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaime_

2, Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the

documentation and/or other materials provided with the distribution,

3, All advertising materials mentioning features or use of this software must display the following acknowledgment: "This product

includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit, (http://www, openssi,org/)"

4, The names "OpenSSLTooikit" and "OpenSSL Project" must not be used to endorse or promote products derived from this software

without prior written permission, Forwritten permission, please contact openssFcore@openssl,org,

5, Products derived from this software may not be called "OpenSSL" nor may "OpenSSL" appear in their names without prior written

permission of the OpenSSL Project,

6, Redistributions of any form whatsoever must retain the following acknowledgment: "This product includes software developed by

the OpenSSL Project for use in the OpenSSL Toolkit (http://www, openssi,org/)"

THIS SOFTWARE IS PROVIDED BYTHE OpenSSL PROJECT "AS IS" AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING,

BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE

DISCLAIMED, IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,

INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF

SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND

ON ANYTHEORY OF LIABILITY,,WHETHER IN CONTRACT, STRICT LIABILITY,,OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)

ARISING IN ANY WAY OUT OFTHE USE OF TH IS SOFTWARE, EVEN IFADVISED OF THE POSSIBILITY OF SUCH DAMAGE,

This product includes cryptographic software written by Eric Young (eay@cryptsoft,com), This product includes software written by

Tim Hudson (tjh@cryptsoft,com),

Original SSLeay License

This package is an SSL implementation written by Eric Young (eay@cryptsoft,com), The implementation was written so as to conform

with Netscapes SSL,

This library is free for commercial and non-commercial use as long as the following conditions are aheared to, The following conditions

apply to all code found in this distribution, be it the RC4, RSA, Ihash, DES, etc,, code; not just the SSL code, The SSL documentation

included with this distribution is covered by the same copyright terms except that the holder is Tim Hudson (tjh@cryptsoft,com),

Copyright remains Eric Young's, and as such any Copyright notices in the code are not to be removed, If this package is used in a

product, Eric Young should be given attribution as the author of the parts of the library used, This can be in the form of a textual

message at program startup or in documentation (online or textual) provided with the package,

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions

are met:

1, Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer,

2, Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the

documentation and/or other materials provided with the distribution,

3, All advertising materials mentioning features or use of this software must display the following acknowledgement: "This product

includes cryptographic software written by Eric Young (eay@cryptsoft,com)" The word 'cryptographic' can be left out if the rouines

from the library being used are not cryptographic related :-),

4, If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must include an

acknowledgement: "This product includes software written byTim Hudson (tjh@cryptsoft,com)"

THIS SOFTWARE IS PROVIDED BY ERIC YOUNG "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT

LIMITEDTO, THE IMPLIED WARRANTIES OF MERCHANTABILITYAND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED, IN

NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,

OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OFSUBSTITUTE GOODS OR SERVICES; LOSS

OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANYTHEORY OF LIABILITX,WHETHER IN

CONTRACT, STRICT LIABILITX,OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OFTHE USE OFTHIS

SOFTWARE, EVEN IFADVISED OF THE POSSIBILITY OF SUCH DAMAGE,

The licence and distribution terms for any publically available version or derivative of this code cannot be changed, i,e, this code

cannot simply be copied and put under another distribution licence [including the GNU Public Licence,]

, Appendix

Linux Source Notice

Tile Pioneer Plasma Television integrated with the Media Receiver in part is powered by utilizes tile Linux operation system, The

machine readable copy of the corresponding source code is available for the cost of distribution, To obtain a copy, please visit

http://www, pioneerelectronics,com/for more information,

GNU General Public License

Version 2, June 1991

59Temple Place-Suite 330, Boston, MA 02111-1307, USA

Everyone is permitted to copy and distribute verbatim co )ies of this license document, but changing it is not allowed,

Preamble

The licenses for most software are designed to take away our freedom to share and change it, By contrast, the GNU General Public

License is intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users,

This General Public License applies to most of the Free Software Foundation's software and to any other program whose authors

commit to using it, (Some other Free Software Foundation software is covered by the GNU Library General Public License instead,) You

can apply it to your programs, too,

When we speak of free software, we are referring to freedom, not price, Our General Public Licenses are designed to make sure that

you have the freedom to distd bute copies of free software (and charge for this service if you wish), that you receive source code or can

get it if you want it, that you can change the software or use pieces of it in new free programs; and that you know you can do these

things,

To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights,

These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it,

For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you

have, You must make sure that they, too, receive or can get the source code, And you must show them these terms so they know their

rights,

We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy,

distribute and/or modify the software,

Also, for each author's protection and ours, we want to make certain that everyone understands that there is no warranty for this free

software, If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the

original, so that any problems introduced by others will not reflect on the original authors' reputations,

Finally, any free program is threatened constantly by software patents, We wish to avoid the danger that redistdbutors of a free prog ram

will individually obtain patent licenses, in effect making the program proprietary, To prevent this, we have made it clear that any patent

must be licensed for everyone's free use or not licensed at all,

The precise terms and conditions for copying, distribution and modification follow,

GNU General Public License

TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION

0, This License applies to any program or other work which contains a notice placed bythe copyright holder saying it may be distributed

under the terms of this General Public License, The "Program", below, refers to any such program or work, and a "work based on

the Program" means either the Program or any derivative work under copyright law: that is to say, a work containing the Program

or a portion of it, either verbatim or with modifications and/or translated into another language, (Hereinafter, translation is included

without limitation in the term "modification",) Each licensee is addressed as "you",

Activities other than copying, distribution and modification are not covered by this License; they are outside its scope, The act of

running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on

the Program (independent of having been made by running the Program), Whether that is true depends on what the Program does,

1, You may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium, provided that you

conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all

the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this

License along with the Program,

You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange

for a fee,

2, You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and

distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions:

a) You must cause the modified flies to carry prominent notices stating that you changed the flies and the date of any change,

b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any

part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License,

c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such

interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a

notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under

these conditions, and telling the user how to view a copy of this License,

Er]

Append ix

(Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the Program

is not required to print an announcement,)

These requirements apply to the modified work as a whole, If identifiable sections of that work are not derived from the Program,

and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to

those sections when you distribute them as separate works, But when you distribute the same sections as part of a whole which is

a work based on the Program, the distribution of the whole must be on the terms of this License, whose permissions for other

licensees extend to the entire whole, and thus to each and every part regardless of who wrote it,

Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to

exercise the right to control the distribution of derivative or collective works based on the Program,

In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program)

on a volume of a storage or distribution medium does not bring the other work under the scope of this License,

3, You may copy and distribute the Program (or a work based on it, under Section 2)in object code or executable form under the terms

of Sections 1 and 2 above provided that you also do one of the following:

a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of

Sections 1 and 2 above on a medium customarily used for software interchange; or,

b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of

physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed

under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or,

c) Accompany it with the information you received as to the offer to distribute corresponding source code, Chis alternative is

allowed only for noncommercial distribution and only if you received the program in object code or executable form with such

an offer, in accord with Subsection b above,)

The source code for a work means the preferred form of the work for making modifications to it, Foran executable work, complete

source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts

used to control compilation and installation of the executable, However, as a special exception, the source code distributed need

not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and

so on) of the operating system on which the executable runs, unless that component itself accompanies the executable,

If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent

access to copy the source code from the same place counts as distribution of the source code, even though third parties are not

compelled to copy the source along with the object code,

4, You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License, Any attempt

otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this

License,

However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as

such parties remain in full compliance,

5, You are not required to accept this License, since you have not signed it, However, nothing else grants you permission to modify or

distribute the Program or its derivative works, These actions are prohibited by law if you do not accept this License, Therefore, by

modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so,

and all its terms and conditions for copying, distributing or modifying the Program or works based on it,

6, Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the

original licensor to copy, distribute or modify the Program subject to these terms and conditions, You may not impose any further

restrictions on the recipients' exercise of the rights granted herein, You are not responsible for enforcing compliance by third

parties to this License,

7, If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues),

conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they

do not excuse you from the conditions of this License, If you cannot distribute so as to satisfy simultaneously your obligations

under this License and any other pertinent obligations, then as a consequence you may not distribute the Program at all, For

example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies directly or

indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of

the Program,

If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is

intended to apply and the section as a whole is intended to apply in other circumstances,

It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any

such claims; this section hasthe sole purpose of protecting the integrity of the free software distribution system, which is implemented

by public license practices, Many people have made generous contributions to the wide range of software distributed through that

system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute

software through any other system and a licensee cannot impose that choice,

This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License,

8, If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the

original copyright holder who places the Program under this License may add an explicit geographical distribution limitation

excluding those countries, so that distribution is permitted only in or among countries not thus excluded, In such case, this

License incorporates the limitation as if written in the body of this License,

, Appendix

9, The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time, Such new

versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns,

Each version is given a distinguishing version number, If the Program specifies a version number of this License which applies to

it and "any later version", you have the option of following the terms and conditions either of that version or of any later version

published by the Free Software Foundation, If the Program does not specify a version number of this License, you may choose any

version ever published by the Free Software Foundation,

10, If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the

author to ask for permission, Forsoftware which is copyrighted by the Free Software Foundation, write to the FreeSoftware Foundation;

we sometimes make exceptions for this, Our decision will be guided by the two goals of preserving the free status of all derivatives

of our free software and of promoting the sharing and reuse of software generally,

NO WARRANTY

11, BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT

PERMITTED BYAPPLICABLE LAW, EXCEPTWHEN OTHERWISE STATEDIN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER

PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING,

BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, THE

ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU, SHOULD THE PROGRAM PROVE

DEFECTIVE,YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION,

12, IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY

OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR

DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR

INABILITYTO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE

OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER

PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES,

END OF TERMS AND CONDITIONS

How to Apply These Terms to Your New Programs

If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make

it free software which everyone can redistribute and change under these terms,

Todo so, attach the followi ng notices to the program, It is safest to attach them to the start of each source file to most effectively convey

the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to where the full notice is found,

This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published

by the Free Software Foundation; either version 2 of the License, or (at your option) any later version,

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;;without even the implied warranty of

MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, See the GNU General Public License for more details,

You should have received a copy of the GNU General Pu blic License along with this program; if not, write to the FreeSoftware Foundation,

Inc,, 59 Temple Place -Suite 330, Boston, MA 02111-1307, USA,

Also add information on how to contact you by electronic and paper mail,

If the program is interactive, make it output a short notice like this when it starts in an interactive mode;

Gnomovision version 6g, Copyright (C) year name of author

Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type 'show w', This is free software, and you are welcome to

redistribute it under certain conditions; type 'show c' for details,

The hypothetical commands 'show w' and 'show c' should show the appropriate parts of the General Public License, Of course, the

commands you use may be called something other than 'show w' and 'show c'; they could even be mouse-clicks or menu items--

whatever suits your program,

You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright disclaimer" for the

program, if necessary, Here is a sample; alter the names:

Yoyodyne, Inc,, hereby disclaims all copyright interest in the program 'Gnomovision' (which makes passes at compilers) written by

James Hacker,

sig natu re of TyCoon, 1 April 1989

Ty Coon, President of Vice

This General Public License does not permit incorporating your program into proprietary programs, If your program is a subroutine

library, you may consider it more useful to permit linking proprietary applications with the library, If this is what you want to do, use the

GNU Lesser General Public License instead of this License,

Erl

Append ix

GNU Lesser General Public License

Version 2,1, February 1999 ¢__'_i_!_

59 Temple Place, Suite 330, Boston, MA 02111-1307, USA

Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed, t_

_his is the first released version of the Lesser GPL, It also counts as the successor of the GNU Library Public License, version 2, hence _"

the version number 2,1,]

Preamble

The licenses for most software are designed to take away your freedom to share and change it, By contrast, the GNU General Public

Licenses are intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users,

This license, the Lesser General Public License, applies to some specially designated software packages--typically libraries--of the

Free Software Foundation and other authors who decide to use it, You can use it too, but we suggest you first think carefully about

whether this license orthe ordinary General Public License is the better strategy to use in any particular case, based on the explanations

below,

When we speak of free software, we are referring to freedom of use, not price, Our General Public Licenses are designed to make sure

that you have the freedom to distribute copies of free software (and charge for this service if you wish); that you receive sou rce code or

can get it if you want it; that you can change the software and use pieces of it in new free programs; and that you are informed that you

can do these things,

To protect your rights, we need to make restrictions that forbid distributors to deny you these rights or to ask you to surrender these

rights, These restrictions translate to certain responsibilities for you if you distribute copies of the library or if you modify it,

For example, if you distribute copies of the library, whether gratis or for a fee, you must give the recipients all the rights that we gave

you, You must make sure that they, too, receive or can get the source code, If you link other code with the library, you must provide

complete object files to the recipients, so that they can reli nk them with the library after maki ng changes to the Iibrary and recom piling

it, And you must show them these terms so they know their rights,

We protect your rights with a two-step method: (1) we copyright the library, and (2) we offer you this license, which gives you legal

permission to copy, distribute and/or modify the library,

To protect each distributor, we want to make it very clear that there is no warranty for the free library, Also, if the library is modified by

someone else and passed on, the recipients should know that what they have is not the odginal version, so that the odginal author's

reputation will not be affected by problems that might be introduced by others,

Finally, software patents pose a constant threat to the existence of any free program, We wish to make sure that a company cannot

effectively restrict the users of a free program by obtaining a restrictive license from a patent holde_

Therefore, we insist that any patent license obtained for a version of the library must be consistent with the full freedom of use

specified in this license,

Most GNU software, including some libraries, is covered by the ordinary GNU General Public License, This license, the GNU Lesser

General Public License, applies to certain designated libraries, and is quite different from the ordinary General Public License, We use

this license for certain libraries in order to permit linking those libraries into non-free programs,

When a program is linked with a library, whether statically or using a shared library, the combination of the two is legally speaking a

combined work, a derivative of the odginal library, The ordinary General Public License therefore permits such linking only if the entire

combination fits its criteria of freedom, The Lesser General Public License permits more lax criteria for linking other code with the

library,

We call this license the "Lesser" General Public License because it does Less to protect the user's freedom than the ordinary General

Public License, It also provides other free software developers Less of an advantage over competing non-free programs, These

disadvantages are the reason we use the ordinary General Public License for many libraries, However, the Lesser license provides

advantages in certain special circumstances,

For example, on rare occasions, there may be a special need to encourage the widest possible use of a certain library, so that it

becomes a de4acto standard, To achieve this, non-free programs must be allowed to use the library,

A more frequent case is that a free library does the same job as widely used non-free libraries, In this case, there is little to gain by

limiting the free library to free software only, so we use the Lesser General Public License,

In other cases, permission to use a particular library in non-free programs enables a greater number of people to use a large body of

free software, For example, permission to use the GNU C Library in non-free programs enables many more people to use the whole

GNU operating system, as well as its variant, the GNU/Linux operating system,

Although the Lesser General Public License is Less protective of the users' freedom, it does ensure that the user of a program that is

linked with the Library has the freedom and the wherewithal to run that program using a modified version of the Library,

The precise terms and conditions for copying, distribution and modification follow, Pay close attention to the difference between a

"work based on the library" and a "work that uses the library", The former contains code derived from the library, whereas the latter

must be combined with the library in order to run,

, Appendix

GNU Lesser General Public License

TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION

0, This License Agreement applies to any software library or other program which contains a notice placed by the copyright holder or

other authorized party saying it may be distributed under the terms of this Lesser General Public License (also called "this License"),

Each licensee is addressed as "you",

A "library" means a collection of software functions and/or data prepared so as to be conveniently linked with application programs

(which use some of those functions and data) to form executables,

The "Library", below, refers to any such software library or work which has been distributed under these terms, A "work based on

the Library" means either the Library or any derivative work under copyright law: that is to say, a work containing the Library or a

portion of it, either verbatim or with modifications and/or translated straightforwardly into another language, (Hereinafter, translation

is included without limitation in the term "modification",)

"Source code" for a work means the preferred form of the work for making modifications to it, Fora library, complete source code

means all the source code for all modules it contains, plus any associated interface definition flies, plus the scripts used to control

compilation and installation of the library,

Activities other than copying, distribution and modification are not covered by this License; they are outside its scope, The act of

running a program using the Library is not restricted, and output from such a program is covered only if its contents constitute a

work based on the Library (independent of the use of the Library in a tool for writing it), Whether that is true depends on what the

Library does and what the program that uses the Library does,

1, You may copy and distribute verbatim copies of the Library's complete source code as you receive it, in any medium, provided that

you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact

all the notices that refer to this License and to the absence of any warranty; and distribute a copy of this License along with the

Library,

You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange

for a fee,

2, You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library, and copy and

distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions:

a) The modified work must itself be a software library,

b) You must cause the files modified to carry prominent notices stating that you changed the flies and the date of any change,

c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this License,

d) If a facility in the modified Library refers to a function or a table of data to be supplied by an application program that uses the

facility, other than as an argument passed when the facility is invoked, then you must make a good faith effort to ensure that, in

the event an application does not supply such function or table, the facility still operates, and performs whatever part of its

purpose remains meaningful,

(For example, a function in a library to corn pure square roots has a purpose that is enti rely well-deft ned independent of the application,

Therefore, Subsection 2d requires that any application-supplied function or table used by this function must be optional: if the

application does not supply it, the square root function must still compute square roots,) These requirements apply to the modified

work as a whole, If identifiable sections of that work are not derived from the Library, and can be reasonably considered independent

and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as

separate works, But when you distribute the same sections as part of a whole which is a work based on the Library, the distribution

of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to

each and every part regardless of who wrote it,

Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to

exercise the right to control the distribution of derivative or collective works based on the Library,

In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the Library) on a

volume of a storage or distribution medium does not bring the other work under the scope of this License,

3, You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the Library, To

do this, you must alter all the notices that refer to this License, so that they refer to the ordinary GNU General Public License,

version 2, instead of to this License, (If a newer version than version 2 of the ordinary GNU General Public License has appeared,

then you can specify that version instead if you wish,) Do not make any other change in these notices,

Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License applies to all

subsequent copies and derivative works made from that copy, This option is useful when you wish to copy part of the code of the

Library into a program that is not a library,

4, You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in object code or executable form under the

terms of Sections 1 and 2 above provided that you accompany it with the complete corresponding machine-readable source code,

which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange,

If distribution of object code is made by offering access to copy from a designated place, then offering equivalent access to copy

the source code from the same place satisfies the requirement to distribute the source code, even though third parties are not

compelled to copy the source along with the object code,

5, A program that contains no derivative of any portion of the Library, but is designed to work with the Library by being compiled or

linked with it, is called a "work that uses the Library", Such a work, in isolation, is not a derivative work of the Library, and therefore

falls outside the scope of this License, However, linking a "work that uses the Library" with the Library creates an executable that is

a derivative of the Library (because it contains portions of the Library), rather than a "work that uses the library", The executable is

therefore covered by this License, Section 6 states terms for distribution of such executables,

Append ix

When a "work that uses the Library" uses matedal from a header file that is part of the Library, the object code for the work may be

a derivative work of the Library even though the source code is not, Whether this is true is especially significant if the work can be

linked without the Library, or if the work is itseUfa Uibrary,The threshoUd for this to be true is not precisely defined by Uaw,

If such an object flue uses onUynumerical parameters, data structure layouts and accessors, and small macros and small inline

functions (ten lines or less in length), then the use of the object file is unrestricted, regardless of whether it is legally a derivative

work, (Executables containing this object code plus portions of the Library will still fall under Section 6,)

Otherwise, if the work is a derivative of the Library, you may d istri bute the object code for the work urider the terms of Section 6, Any

executables containing that work also fall under Section 6, whether or not they are linked directly with the Library itself,

6, As an exception to the Sections above, you may also combine or link a "work that uses the Library" with the Library to produce a

work containing portions of the Library, and distribute that work under terms of your choice, provided that the terms permit

modification of the work for the customer's own use and reverse engineering for debugging such modifications,

You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its use are covered

by this License, You must supply a copy of this License, If the work dudng execution displays copyright notices, you must include

the copyright notice for the Library among them, as well as a reference directing the user to the copy of this License,

Also, you must do one of these things:

a) Accompanythe work with the complete corresponding machine-readable source codefor the Library including whatever changes

were used in the work (which must be distributed under Sections 1 and 2 above); and, if the work is an executable linked with

the Library, with the complete machine-readable "work that uses the Library", as object code and/or source code, so that the

user can modify the Library and then relink to produce a modified executable containing the modified Library, (it is understood

that the user who changes the contents of definitions files in the Library will not necessad ly be able to recompile the application

to use the modified definitions,)

b) Use a suitable shared library mechanism for linking with the Library, A suitable mechanism is one that (1) uses at run time a

copy of the library already present on the user's computer system, rather than copying library functions into the executable,

and (2) will operate properly with a modified version of the library, if the user installs one, as long as the modified version is

interface-compatible with the version that the work was made with,

c) Accompany the work with a written offer, valid for at least three years, to give the same user the materials specified in Subsection

6a, above, for a charge no more than the cost of performing this distribution,

d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy the above

specified materials from the same place,

e) Verify that the user has already received a copy of these materials or that you have already sent this user a copy,

For an executable, the required form of the "work that uses the Library" must include any data and utility programs needed for

reproducing the executable from it, However, as a special exception, the materials to be distributed need not include anything that

is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating

system on which the executable runs, unless that component itself accompanies the executable,

It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally accompany

the operating system, Such a contradiction means you cannot use both them and the Library together in an executable that you

distribute,

7, You may place library facilities that are a work based on the Library side-by-side in a single library together with other library

facilities not covered by this License, and distribute such a combined library, provided that the separate distribution of the work

based on the Library and of the other library facilities is otherwise permitted, and provided that you do these two things:

a) Accompany the combined library with a copy of the same work based on the Library, uncombined with any other library

facilities, This must be distributed under the terms of the Sections above,

b) Give prominent notice with the combined library of the fact that part of it is a work based on the Library, and explaining where

to find the accompanying uncombined form of the same work,

8, You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided under this License, Any

attempt otherwise to copy, modify, sublicense, link with, or distribute the Library is void, and will automatically terminate your

rights under this License, However, parties who have received copies, or rights, from you under this License will not have their

licenses terminated so long as such parties remain in full compliance,

9, You are not required to accept this License, since you have not signed it, However, nothing else grants you permission to modify or

distribute the Library or its derivative works, These actions are prohibited by law if you do not accept this License, Therefore, by

modifying or distributing the Library (or any work based on the Library), you indicate your acceptance of this License to do so, and

all its terms and conditions for copying, distributing or modifying the Library or works based on it,

10, Each time you redistribute the Library (or any work based on the Library), the recipient automatically receives a license from the

original licensor to copy, distribute, link with or modify the Library subject to these terms and conditions, You may not impose any

further restrictions on the recipients' exercise of the rights granted herein, You are not responsible for enforcing compliance by

third parties with this License,

11, If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues),

conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they

do not excuse you from the conditions of this License, if you cannot distribute so as to satisfy simultaneously your obligations

under this License and any other pertinent obligations, then as a consequence you may not distribute the Library at all,

For example, if a patent license would not permit royalty-free redistribution of the Library by all those who receive copies directly or

indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of

the Library,

, Appendix

12,

13,

14,

If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is

intended to apply, and the section as a whole is intended to apply in other circumstances,

It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any

such claims; this section has the sole purpose of protecting the integrity of the free software distribution system which is implemented

by public license practices, Many people have made generous contributions to the wide range of software distributed through that

system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute

software through any other system and a licensee cannot impose that choice,

This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License,

If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted interfaces, the

original copyright holder who places the Library under this License may add an explicit geographical distribution limitation excluding

those countries, so that distribution is permitted only in or among countries not thus excluded, In such case, this License incorporates

the limitation as if written in the body of this License,

The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from time to time,

Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns,

Each version is given a distinguishing version number, If the Library specifies a version number of this License which applies to it

and "any later version", you have the option of following the terms and conditions either of that version or of any later version

published by the Free Software Foundation, If the Library does not specify a license version number, you may choose any version

ever published by the Free Software Foundation,

If you wish to incorporate parts of the Library into other free programs whose distribution conditions are incompatible with these,

write to the author to ask for permission, For software which is copyrighted by the Free Software Foundation, write to the Free

Software Foundation; we sometimes make exceptions for this, Our decision will be guided by the two goals of preserving the free

status of all derivatives of our free software and of promoting the sharing and reuse of software generally,

NO WARRANTY

15, BECAUSETHE LIBRARY IS LICENSED FREEOFCHARGE,THERE IS NO WARRANTY FORTHE LIBRARY,TOTHE EXTENTPERMITTED

BY APPLICABLE LAW, EXCEPTWHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES

PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT

LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, THE ENTIRE

RISK AS TOTHE QUALITYAND PERFORMANCE OFTHE LIBRARY IS WITH YOU, SHOULDTHE LIBRARY PROVE DEFECTIVE,YOU

ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION,

16, IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY

OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU FOR

DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR

INABILITYTO USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE

OR LOSSESSUSTAINED BYYOU ORTHIRD PARTIES ORA FAILUREOFTHE LIBRARYTO OPERATEWITH ANYOTHER SOFTWARE),

EVEN IFSUCH HOLDER OR OTHER PARTYHAS BEEN ADVISED OFTHE POSSIBILITY OF SUCH DAMAGES,

END OF TERMS AND CONDITIONS

How to Apply These Terms to Your New Libraries

If you develop a new library, and you want it to be of the greatest possible use to the public, we recornrnend making it free software that

everyone can redistribute and change, You can do so by permitting redistribution under these terms (or,alternatively, under the terms

of the ordinary General Public License),

To apply these terms, attach the following notices to the library, It is safest to attach them to the start of each source file to most

effectively convey the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to where the full notice

is found,

This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as

published by the Free Software Foundation; either version 2,1 of the License, or (at your option) any later version,

This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of

MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, See the GNU Lesser General Public License for more details,

You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software

Foundation, Inc,, 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA

Also add information on how to contact you by electronic and paper mail,

You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright disclaimer" for the library,

if necessary, Here is a sample; alter the names:

Yoyodyne, Inc,, hereby disclaims all copyright interest in the library 'Frob' (a library for tweaking knobs) written by James Random

Hacker,

irif:]

Er]

sig natu re of TyCoon, 1 April 1990

Ty Coon, President of Vice

That's all there is to it!

Append ix

Specifications

I1_,

Number of Pixels

Audio Amplifier

Surround System

Power Requirement

Dimensions

Weight

Reception System (Digital)

Circuit type

Tuner

1280 x 768 pixels

13W+13W(1 kHz, 10 %, 8 _2)

SRS/FOCUS/TruBass

PDP-5OSPU: 120 V AC, 60 Hz, 363 W

(0.2 W Standby)

PDP-504PU: 110-240 V AC, 50/60 Hz, 363 W

(0.3 W Standby, 120 V)

PDP-5OSPU: 1270 (W) x 737 (H) x 93 (D) mm

(50 (W) x 29 (H) x 3 11/16(D) inches)

PDP-504PD: 1270 (W) x 737 (H) x 98 (D) mm

(50 (W) x 29 (H) x 3 7/8 (D) inches)

PDP-5OSPU: 32.8 kg (72.3 Ibs.)

PDP-504PU: 38 kg (83.8 Ibs.)

1024 x 768 pixels

13 W+13 W (1 kHz, 10 %, 8 £2)

SRS/FOCUS/TruBass

PDP-435PU: 120 V AC, 60 Hz, 298 W

(0.2 W Standby)

PDP-434PU: 110-240 V AC, 50/60 Hz, 298 W

(0.3 W Standby, 120 V)

PDP-435PU: 1120 (W) x 652 (H) x 93 (D) mm

(44 1/8 (W) x 25 11/16(H) x 3 11/16(D) inches)

PDP-434PU: 1120 (W) x 652 (H) x 98 (D) mm

(44 1/8 (W) x 25 11/16(H) x 3 7/8 (D) inches)

PDP-435PU: 26.8 kg (59.1 Ibs.)

PDP-434PU: 30.5 kg (623 Ibs.)

VHF/UHF

CATV

Audio format

Reception System (Analog)

Circuit type

Tuner VHF/UHF

CATV

Audio multiplex

Terminals Rear ANTENNA/CABLE A IN

ANTENNA B

iilNK (TS)

INPUT 1

INPUT 2

INPUT 3

Monitor Out

Digital Audio Output

VCR Control Output

CONTROL IN

CONTROL OUT

Cable CARD

Front INPUT 4

OSD

Power Requirement

Dimensions

ATSC Digital TV system

8VSB/64QAM/256QAM/QPSK demodulation

VHF 2-13ch, UHF 14-69ch

2-135ch

Dolby Digital

American TV standard NTSC system

Video signal detection PLL full synchronous detection, PLL digital synthesizer

system

VHF 2-13ch, UHF 14-69ch

ANTENNA/CABLE A IN: 1-135ch Cable: 1-125ch

BTSC system

75 _2 UNBAL, F Type for DTV/VHF/UHF/CATV in

75 _2 UNBAL, F Type for VHF/UHF/CATV in

Loop out

$4OO (2)

COMPONENT VIDEO in, S-VIDEO in. VIDEO in, AUDIO in, HDMI in

S-VIDEO in, VIDEO in, AUDIO in

COMPONENT VIDEO in, AUDIO in, HDMI in

S-VIDEO out, VIDEO out. AUDIO out

Optical (1)

Point of Deployment

COMPONENT VIDEO in, S-VIDEO in, VIDEO in, AUDIO in

Analog RGB in, AUDIO in

English/French/Spanish

120 V AC, 60 Hz, 43.3 W (31 W Standby, 120 V)

420 (W) x 90 (H) x 295 (D) mm

(16 9/16 (W) x 3 9/16 (H) x 1110/16(D) inches)

Weight 5.8 kg (12.8 Ibs.)

•Design and specifications are subject to change without notice.

{Appendix }

Trademarks

•FOCUS, WOW, SRS and (O) e symbol are trademarks of SRS Labs, inc,

FOCUS and WOW technologies are incorporated under license from SRS Labs, Inc,

•Manufactured under license from Doiby Laboratories, "Dolby" and the double-D symbol are trademarks of Doiby Laboratories,

• HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC,

• This product includes FontAvenue ®fonts licensed by NEC Corporation, FontAvenue is a registered trademark of NEC Corporation,

• "i,LINK" and the "i,LINK" logo are trademarks,

• DDC is a registered trademark of Video Electronics Standards Association,

• CabIeCARD is a trademark of Cable Television Laboratories, Inc,

• The names of the companies or institutions are trademarks or registered trademarks of the respective companies or institutions,

• This product incorporates copyright protection technology that is protected by U,S, patents and other intellectual property rights,

Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other

limited consumer uses only unless otherwise authorized by Macrovision, Reverse engineering or disassembly is prohibited,

_,1[0]"_

Erq

Published by Pioneer Corporation.

Printedonrecycledpaper

Imprimesurpapierrecycle

PRINTED WITH I

SOY INK T=

I- Should this product require service in the U.S.A. and you wish to locate the nearest Pioneer

Authorized Independent Service Company, or if you wish to purchase replacement parts, operating

instructions, service manuals, or accessories, please call the number shown below.

800 421 1404

Please do not ship your product to Pioneer without first calling the Cus[omer Suppor[ Division at the

above listed number for assistance.

Pioneer Electronics (USA) Inc.

Customer Support Division

RO. BOX 1760, Long Beach,

CA 90801-1760, U,S,A,

For warranty information please see the Limited Warranty sheet included with your product.

Should this product require service in Canada, please con[act a Pioneer Canadian Authorized Dealer

to locate the nearest Pioneer Authorized Service Company in Canada,

Alternatively, please contact the Customer Satisfaction Department at the following address:

Pioneer Electronics of Canada, Inc.

Customer Satisfaction Department

300 Allstate Parkway, Markham, Ontado L3R OP2

(905)479-4411

1(877)283-5901

For warranty information please see the Limited Warranty sheet included with your product.

Si ce produit doit 6tre r6par6 au Canada, veuillez vous adresser a an distdbateur autorise Pioneer du

Canada pour obtenir le nora du Centre de Service Autorise Pioneer le plus pres de chez-vous. Vous

pouvez aussi contacter le Service a la clientele de Pioneer:

Pioneer Electroniqaes da Canada, Inc.

Service _ la clientele

300, Allstate Parkway, Markham, Ontario L3R OP2

(905)479-4411

1(877)283-5901

Pour obtenir des renseignements sur la garantie, veuillez vous repor[er au feuillet sur Is garant e

restreinte qui accompagne le produit. S018a_enfr

Published by Pioneer Corporation.

PIONEER CORPORATION

4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan

PIONEER ELECTRONICS (USA) INC.

P.O. BOX 1540, Long Beach, California 90810-1540, U.S.A. TEL: (800) 421-1404

PIONEER ELECTRONICS OF CANADA, INC.

300 Allstate Parkway, Markham, Ontario L3R OP2, Canada TEL: 1-877-283-5901

PIONEER EUROPE NV

Haven 1087, Keetberglaan 1, B-9120 Melsele Belgium TEL: 03/570.05.11

PIONEER ELECTRONICS ASIACENTRE PTE. LTD.

253 Alexandra Road, #04-01, Singapore 159936 TEL: 65-6472-7555

PIONEER ELECTRONICS AUSTRALIA PTY. LTD.

178-184 Boundary Road, Braeside. Victoria 3195, Australia TEL: (03) 9586-6300

PIONEER ELECTRONICS DE MEXICO S.A. DE C.V.

Blvd.Manuel Avila Camacho 138 10 piso CoI,Lomas de Chapultepec, Mexico D.E 11000 TEL: 55-9178-4270 KOO2A En

<04H00001> Printed in Japan /Imprime au Japon <ARE1393-A>

PIONEER Plasma Television Manual L0511176

Navigation menu

Versions of this User Manual:

Views

Navigation