| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 567803 |
| Application ID | siOfTaNyENoi88usJtK20w== |
| Document Description | Users Manual II |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 169.71kB (2121402 bits) |
| Date Submitted | 2005-08-03 00:00:00 |
| Date Available | 2005-08-03 00:00:00 |
| Creation Date | 2005-07-26 10:06:02 |
| Producing Software | Acrobat Distiller 5.0 (Windows) |
| Document Lastmod | 2005-07-26 10:06:02 |
| Document Title | User Manual.pdf |
| Document Creator | PScript5.dll Version 5.2 |
| Document Author: | elisa_chen |
3:53 5 on .= 5.2, EnuEaEEoU 1
3295: mini /
vca 5:32 22:3 30> 6:55.
3:30am £25;
5 5.5556 53: 2: 3539.5
fine in
Iummlr
Ages
fihkhfi‘hmflthflib‘ .
as".
THFMZH
I. INTRODUCTION
GT1000 Alarm System un'lize the GPS and car alarm functions in one unit. You can
monitor the vehicle location and control the car alarm remotely. In addition. the unit
will send event report it any trigger occurs. It has built»in 7 outputs and 5 inputs to
perlorm essential alarm functions. More importantly, it can be connected With a
GLOBAL TRACK AM series alarm to provtde full protection.
1 1 Report structure
The standard report sent by the unit includes the information: (1) units ID. (2) status.
(3) time. (4) GPS's latitude and longitude. (5) speed. (6) direction. (7) temperature.
(8) device's status. (9) event number. and (10) report configuration parameters.
(1) Unit‘s ID' each device has its own unique ID and must be registered in the
server in order to perform monrtoring or controlling
(2) status. A=Va|id, L=Iast known.
(3) Time: report time in Greenwrcn Mean time zone
(4) GPS‘s latitude and longitude.
(5) Speed in krn/H
(G) Direction: in degree to the North.
(7) Temperature: in Celsius. It the temperature is not connected, ‘NA‘ will be shown
in this field.
(8) Device's status: there are 32 states to represent the IIO and working modes
lorthe both the device and the external alarm.
(9) Event number: all the generated reports will include a unique event Nnumber
to indicate why it has been sent.
(10) Report configuration parameters: user can remotely change the report
configuration, and the configuration parameters will be shown in this field.
1 2 Report Setup
GTi 00!) must be initialized by GLOBAL TRACK PC setup program in order to make
communication with the remote sewer [call center There are 4 main sections
that allow users to program the device, (1) User detail (Device ID, server IF’, and
port, SMS number. GPRS APN,,. ) (2) In-bullt Geofence function (up to 5 circular
and 5 rectangular Geofence shapes can be set in the device) (3) Automatic report
setting (Time, Distance, Intelligent mode, Temperature, Low battery, Course
change, .,.) (4) ALARM report (to enable or disable the event generated by the
inputs or external ALARM, e.g. ACC, DOOR. ALARM,,.,..) Those data is saved
in device's EEPROM and will not be lost even it the power is failure.
Note that the device ID, GPRS APN name, GPRS login name and password
need to be set in initial PC setup in order to make the connection to the server.
All the report configuration or Geofence setup can be changed atanytime via over
-the-air commands,
The automatic reporting mode can be categorized as time report, “dismrlce' report.
or ‘time air velocity' report. User can choose the reporting mode and related
parameters via the PC setup program or the remote sever.
The event trigger report is also configurable. User can turn on or off any event
generated report from the PC setup program or via the air command. The event
triggered report include (1) in»vehicle Door close/open (2) In»vehic|e ignition onion
(3) Temperature range inloul the preset range (4) In»vehicle shock sensor tagger.
The external alarm (optional) trigger reports are also oont'lgurable and can he set
from PC setup program or air command.
The server can not only configure the device just like the PC setup program does,
but ll also can send the command to control the device The server can control
both the device and the external alarm
1.3 Geofence tunction
The device has built-in 10 Geotenoe sets (4 circular. 5 rectangular shapes and
one immediate geotence )it will send the report to the sewer if the Geofence event
is triggered. User can setup the Geotence area from the PC setup program or
sending the define.
* A unique immediate Geotence tunction:
‘Immediate—Geotence (motion is a circular type Geofence which can be activated
or deactivated "cm a single button. When activated. the system will record the
current position and use the predefined radius as a circular Geotence to guard
the vehicle. lithe vehicle moves out at the preset Geotenoe zone. a report will be
generated to the server. User can deactivate the self-Geotence at any time by
pressing the button again. It the GPS cannot be located when the Immediate
Geofenoe function is been executed. GT1000 will use the last known position as
the origin of the circular Geotenoe zone to perform the protection.
t: US patten for immediate Geotence tunction is pending.
1,4 Store and forward abiliy
When there is no GPRS service or the server dose. the unit will send short message
to the sewer "SMS numbers ls defined. All the stored report will be forward to the
sewer when GPRS connection is completed next time.
1.5 TCP and UDP socket supflrt
GT1000 supports both UDP and TCP socket communication. The sewer IF, port
number and socket type can be selected from the PC-setup program or remote
server command. In addition, the connection can be swap over to any server
IP or port (either UDP or TCP) via the air command.
1.6 Valet switch ografion
User can use the supplied Valet switch to perform 5 essential tasks. including
(1) sending help/ SOS report (2) activate or deactivate Immediate Geotence
(3) Activate panic mode and send ‘panic' report (4) sending “Duty on' or ‘Duty afl'
report to the server and (5) Emergency release to exit ‘ARM'. ‘Anti-carjacking' or
‘Panic' modes.
1.7 History report
Flash memory for recording reports up to 900 reports. It can be read out from the
PC setup program via serial port.
1.8 Backup battery
The system has a built-in rechargeable battery (4.5V BDmA/H) tor emergency use.
The system will send a power cut repofi when a! the external pwver are disconnected,
A 12V 1.2AIH backup battery is suggested to be used in order to maintain
maximum pertarmance.
1.9 LED indication
Three LED indicate the status of the POWER, GPRS signal and GPS signal.
The LED on the valet switch can also indicate the status at the button
operation, eg, sending help report, panic report,
II. BASIC FUNCTIONS
FUNCTIONS
APPLICATIONS
GPS
GPS receiver will autpul a complete posilion,
velocity. and lime (PVT) solution in the NMEA
Version 3.0 pmlocol
GPRS, SMS
GPRS use standard TCP or UDP communicale
protocol, If lhe GPRS service is failed, the SMS
mode will be turned on far emergency use.
5 input
In-vehicle Door.
Ill-Vehicle ACC
Temperature sensor port
Shock/ Ultrasonic sensor port
Valet Switch
7 outpul
1. Parking Iiglll
2. Door Incl:
3. Door Unlock
4. ARM
5. Horn
6. Trunk Release
7. Valel Swilch LED
Valet Switch
I. Help /sos repon sending
2. Immediate Geofenee nodule/deactivate
3. Panic mode + repon acrivarddcaclivale
4. Dnry on/ofl repon
5. Emergency release
FUNCTIONS
APPLICATIONS
Initialize the unit and program the device,
including Network APN, server IP addrms, user
message. repon control, and Geogmce setting,
PC-setup etc
Note that Network APN and server 1? details must
he sel before the installation
If aGLomLmtcx extanal alarm is installed, the
External ALARM system will gather all the alarm information for
(Optional) the remote monitoring. The sewer also has the
ability to control the external alarm.
Automatic repon for AVL tracking purpose:
Fixed time repon
Fixed distance report
S‘mda'd Rm“ intelligent report (combine lime and distance)
Self—diagnostic repon
Keep alive report
Temperature report
Speeding report
Event Report my "““°’Y.'°""“
Geofence trigger report
ALARM trigger report, e.g. PANIC mode, ARM,
ACC inputs. etc
History dala store 900 report can be saved in unit,and read from
server and pc-semp
III. PANEL INSTALLATION AND WIRING DIAGRAM
cm ANTENNA Grs “In“
sm INTERNAL
cum BATTERY
JUMPER ®
I EXT.CAR
QIALARMIPC
~ snnvr
cps n n
“MAW LEMVALET
" swncn A
(91/0 (J)
POWERPQRT
I \
muffins“
WHE
TEMPERATURE
SENSOR @
SHOCK/ULTRASONIC (7 RESET
BUTI‘ON
SENSOR (a
(1) GSM antenna port: temale SMA
(2) GPS antenna port: temale SMA
(3) Reset Button
(4) GPS output port
(5) PC setup / Extemsl alarm port: white 3-pin connector.
(6) LED + Valet switch port: red 3-pin connector.
(7) Shock sensor or Ultrasonic sensor port: red 3»pin connector.
(8) Temperature sensor pon. white 2»pin connector.
(9) In-vehicle IIO and power port: tor in-vehicie IIO. external battery. solar panel
and power.
(10)er card holder
(11) Internal battery switch jumper: opened by detault. and shorted to use this
battery.
IV. VALET SWITCHILED OPERATION
User can use the supplied Valet switch to pertorm 5 essential tasks.
(1) Sending help! SOS report
Press the button less than one second and then release. The LED will flash once
and a “help/SOS report will be generated,
(2) Activate/Deactivate Immediate Geolenoe
Press the button and release it when the LED flashes once. Afier releasing it, the
LED will stay continuously on to indicate the ‘Immediate Geotence’ is on. To
deactivate: Press the button (the LED will be temporally oh), and release it when
the LED flashes once. Alter releasing it, the LED will then stay continuously off.
A report will be sent out it the vehicle goes out/in to the Geotence zone.
(3) Activate/Deactivate panic mode and send ‘panic' report
Press the button (the LED will be temporally stay on) and release it when the LED
flashes twice. Afler releasing it. the LED will flashes twioe to indicate that the panic
mode is been triggered and the panic report is sent out. In panic mode, the srren
will sound and the parking light will flash. To exit panic mode:
press the button (the LED will be temporally stay on), and release itwhen the LED
flashes twice. Alter releasing it. the siren and parking light will stop.
(4) ‘Duty on‘ or ‘Duty ofl‘ reports I ‘Status on' Status off reports
Press the button (the LED will be temporally stay or!) and release I| when he LED
flashes 3 times. After releasing it. a ‘Duty on' report will be sent out‘ and the LED
Will be in the cycle for flashing 3 times and then stop for one second. To deactivate:
Press the button (the LED will be temporally stay on) and release it when me LED
flashes 3 times. After releasing it. a ‘Duty ofl' report will be sent out and the LED
will stop flashing.
(5) Emergency release to exit 'ARM'. ‘Anti-canacking‘ or ‘Panic' modes.
Press the button (the LED will be temporally stay off) and release it when the LED
flashes 5 times, After releasing it. 'ARM‘. “parking Iight‘. and 'siren' ouputs wrll back
to normal (Disarm) status.
V. STATUS INDICATOR
System LED:
RED: Power indicator, When the un|t power on. the led will light all the time.
YELLOW GSM/GPRS indicator. Yellow LED will flash when the device is connected
to the server with valid GPRS connection. It will stay continuously on when it is in
GSM mode. It will stay ofl it there is no GSM reception,
GREEN, GPS indicator, This LED will be continuously on when the unit received
a valid GPS data,
Note that the Yellow and Green LEDs indication will not be valid until the system
goes to the working mode. normally 30 seconds afler power on.
Valet Switch LED:
Immediate-Genience on: Valet Switch LED will on continuously.
Duty on: the LED will be in the ojde for (lashing 3 times and then on for one second,
Immediate-Geofence and Duty both on“ the LED will be in the cycle lor flashing
3 timesend lhen on for one second,
VI, PC SETUP AND SYSTEM INITIATION
PC setup Procedure:
(1) Connect the 3PIN R5232 GLOBAL TRACK serial cable into the PC setup
port and PC COM port.
(2) Open the PC setup program.
(3) Select the correct COM port tor communication
(4) Power on the device or press the reset button tor at least 1 second.
(5) Click ‘OK' to start the program
Note that. itthe connection tails. please check the cable connection is secured
correctly. Press the reset button for a longer time, e.g. another 2 seconds.
A LOGIN dialog window
Select the correct COM port number. then “reset” the unit by pressing the reset button.
And next click “OK".
COM Pun Scning
10
Note that: it is necessary to power on and reset the GLOBAL TRACK device soon
after click the ‘OK' button.
PC setup program will detect the hardware for 60 seconds. If no hardware is
detected, it will exit. During the opening up screen shown as below. user can press
“Esc' key to terminate the program.
B Versron No. Checking
The below interface will last un||| correct UNIT Version N0. is checked.
(You should run this program before turn on power 0! UNIT)
E5M4EFH5-5M5 THKKINE I-INIT
inuhm~ n \| 2mm w
11
C. MAIN INTERCACE
1.[Usef ml]:
MUNITIDUMWITWMHWW.
12
Set Access Point Nmre (AFN), User Name, Password and Dielup Number for the
GPRS connection. The maximum Iengflr of the APN. User name and Password
Is 49 characters.
1-2!
_l‘_l
TCP/UDP uddreu and Port number of the remote server belng set. UNIT will
send reports to this address.
Note that only one TCP or UDP merwlll be used a! the same rime
SeimesMsNunberoffl'reaenmmemitwilsend mommrheurverWGPRS
connection Ia felled.
UNIT can save up to 900 most recent reports. Click ‘Export‘ button to export those
stored reports to Text or Excel file.
Note that Device iD , GPRS Login and sewer IP/Port information need to be input
correctly in order to make the connection If the report sending using GPRS
connection fails, the report will be sent to the ‘primary' SMS number first. The
report will be resent. when the GPRS connection becomes available
lull! u- qu uni nut um
UP" lull”!
Initialize All Data: clear all settings “1 UNIT.
Exit PC-Setup: exit PC-Selup to main program.
Request All: read out the whole existing setting from GT1000.
Request: read out the setting in the current page,
Loadl load the saved configuration files.
Apply: transler the setting to GT1000 in the current pages.
Apply All: transfer the whole setting to GT1000.
14
2.[Gsofence]:
4 circular end 5 reek-rule Geofenee zones can be set When UNIT ll our of these
predefined zones. e report will be generated Please refer to eectlcn IV, (2) to
perform the self geoience fmcfion. When eelfgeoienee Ie maimed, Itwlll record
the current poeilion u the origin end use the predefined distance for the rediun
to e able a circular geofenee ZDMA
on anfight poinndenright point has the former: N2446r5321E1212044231
(21 fixed digits)
Radius has he format:
User can inpunhe drwlar radius from 0.1 m 1000 On km).
15
Automatlc report can be configured in lhls section. To minus the lunmlon(s),
please select ‘4' In meekbox and {III il am in me mm.
The reports will be sunmarimd e:
(1) Intelligent report
Parameters: cum, Report I'mewhen Int/vim. Repom'mewhen stop, and thlenhuld
speed (recomrnmd mruhold speed: 5 Ian/h).
(2) Intelligent highly report (recon! the upon in he sysmm‘s huh ram)
Pavements: 0nl01f. Rammimvmenlnwilu. Rapoltt‘memnmp, endmreshold
speed (recommend threshold speed: 5 kmlh).
16
(3) Fixed time report
Parameters: OnIOff, and time.
(4) Fixed distance report
Parameters: On/Ofl. and distance. (min. distance is 0.1 km, max. distance is 100 km).
(5) Keep alive procedure (in order keep conneetion in GPRS network. the
unit can be set to send short keep alrve report to the server in order to prevent the
disconnection trorn the mobile service provider)
Parameters. OnlOff, and time.
(6) Self-diagnostic report (for a conmm period of time, the UNIT can send a report
to the server in order to check the tunctronality)
Parameters: OnIOff, and time.
(7) Course change report (to send a report when the course change is bigger than
the value set here)
Parameters: Onion, and course change in degree.
(8) Temperature report
Parameters: Onion, and min. and max. temperature.
(6) Low battery warning report (to alert user when the external battery level Is low)
Parameters: OnlOfl, and warning battery level for report, For example. 30
to represent 30% lower level report.
The system will ignore the parameter with a value ‘0' to prevent continuous
non-stop reporting.
11
4.[Alarm REPORT setup]
Alarm report“) is also configurable. User can customize the event: generated
by the in-vehlde input or external car alarm lo be eent lo the server. lflhe mama)
be checked, (he releled reporla wil be sent Otherwise me report will be ignored
even when an event is occurred imamaw
1B
APPENDIX 1
GT1000 SPECIFICATIONS
Phlsical Parameters
Enclwsure dimensions | umrssowzsm)
Wexght | 200g
Electrical
DC Supply volvage
DC Tolerance wnllnge IOV — 40V
Current (GPRS anlme) 50am
Curran (GPRS Innsmission) 801m
Current (Pen-k) I20mA
Buckug leg
Imam-l for emergency
upon
Emery type Mn sv erd
Emery cnpncily | so anH 1 2 M-1
Charge lype Built-in chrrre cam-ix, Buill-in charge cimm
with jumper pmeaim
GER$
' Dam provided by Sony Ericsson
Frequmcy Rang! (MHz) mime and 850621900 models
ChmneI spacing (Hz) zoo
GPRS connectivity GPRS mulli-slol dm 3
GPRS mobile swim elm B
SIM card interface 3vxsv
SMS slang: Capacity 40 in M12
Antenna Connector Malt TNC
Anlznna [mpzdance Sodmls
19
GES.‘
' Data provided by Trimble
Protocol mare-iota;
Baud Rate 9600
signal 1575MHz
Accuracy Hertz/mm <6 meters (51m), <9 mum (9095)
Allillldc <18 meters (90%)
Velotiry
Hot Stan:
Source Exif Data:
File Type : PDF
File Type Extension : pdf
MIME Type : application/pdf
PDF Version : 1.3
Linearized : No
Create Date : 2005:07:26 10:06:02+08:00
Modify Date : 2005:07:26 10:06:02+08:00
Page Count : 24
Creation Date : 2005:07:26 02:06:02Z
Mod Date : 2005:07:26 02:06:02Z
Producer : Acrobat Distiller 5.0 (Windows)
Author : elisa_chen
Metadata Date : 2005:07:26 02:06:02Z
Creator : elisa_chen
Title : User Manual.pdf
EXIF Metadata provided by EXIF.tools