PORTMAN ELECTRONICS RX03-LR2W CAR ALARM User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3907581
Application ID	8MIRK/6yjqy5Y6LfNpOk+w==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	17.19kB (214845 bits)
Date Submitted	2018-06-30 00:00:00
Date Available	2018-06-30 00:00:00
Creation Date	2018-06-25 17:25:57
Producing Software	Microsoft® Office Word 2007
Document Lastmod	2018-06-25 17:25:57
Document Title	User manual
Document Creator	Microsoft® Office Word 2007
Document Author:	admin

4180069 MANUAL
1. Antenna Model : 4180069
2. Technology: Lora 2-WAY
3. Max Range : 2 miles
4. LED : status indication
5. Button: setup key
Connect to Host (To plug Weblink or RF-Decoder/Antenna)
pin1- Rx (Data from antenna, 0-5 Volts)
pin2- Tx (Data from Host, 0-5 Volts)
pin3- GND (Ground from Host)
pin4- 12V (Power from Host, 12V )
The Control Center,typically located on the upper part of the front windshield.It consists of:
The In-vehicle system antenna.
The Status LED,as a visual indicator of the system’s status.
The Control button,for placing the system into Valet Mode and to perform the Emergency
Override operation.
This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled
environment.
This equipment should be installed and operated with a minimum distance of 25cm between the
radiator and any part of your body.
FCC Statement
This device complies with FCC Rules part 15. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) This device must
accept any interference that may be received, including interference that may cause
undesired operation. The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this equipment. Such modification
could void the user’s authority to use the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced radio/TV technician for help.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 2
Language                        : zh-CN
Author                          : admin
Creator                         : Microsoft® Office Word 2007
Create Date                     : 2018:06:25 17:25:57+08:00
Modify Date                     : 2018:06:25 17:25:57+08:00
Producer                        : Microsoft® Office Word 2007

EXIF Metadata provided by EXIF.tools