PRIMA TECHNOLOGY Direct View Digital 27 To 40 TV Manual L0522824

User Manual: PRIMA PRIMA TECHNOLOGY Direct View Digital 27 to 40 TV Manual PRIMA TECHNOLOGY Direct View Digital 27 to 40 TV Owner's Manual, PRIMA TECHNOLOGY Direct View Digital 27 to 40 TV installation guides

Open the PDF directly: View PDF .
Page Count: 44

HT3061A

HT3461A

Before operating the unit, please read this manual thorough/jz

Ta Co

_mportant Safety

_nstructions ............................. 1

Getting Started ........................ 3

Front View ................................................. 3

Back View .................................................. 4

Remote Control ......................................... 5

Installing batteries ...................................... 6

Effective range of the Remote ................... 6

_nstaMMation............................... 7

Antenna connections ................................. 7

Cable!satellite connections ........................ 8

Using MONITOR outputs ........................... 9

Using AVl orAV2 inputs ............................ 10

Using AV3 inputs ........................................ 10

Using Progressive scan/

component video 1 or 2 inputs .................. 11

Using DVl and AUDIO inputs ..................... 12

Power on/off ............................ t3

Power On ................................................... 13

Power off .................................................... 13

SeUecting the Video _nput ....... 14

AV Input Selection ..................................... 14

Switching from AV to TV ............................ 14

Tuning ...................................... 15

Auto Search ............................................... 15

Setting TV!Cable option ............................. 15

Setting channel label ................................. 15

Erasing an unwanted channel ................... 16

Setting favorite channel ............................. 16

ChanneU SeMection ................... 17

Scanning channels .................................... 17

Adjusting Picture .................... t8

Adjusting picture ........................................ 18

Selecting picture mode .............................. 18

Selecting picture aspect ............................ 18

Freezing picture ......................................... 18

Sound ....................................... 19

Adjusting volume ....................................... 19

Selecting audio mode ................................ 19

Adjusting sound ......................................... 20

Selecting sound mode ............................... 20

Timer ........................................ 2t

Setting Timer off ......................................... 21

Setting Sleep Timer ................................... 21

Setting Timer on ........................................ 22

Setting Timer Pr. item ................................ 22

Setting Prog. No. item ............................... 23

Setting Alarm ............................................. 23

System Setup .......................... 24

Selecting a Language ................................ 24

Degaussing the set .................................... 24

Picture rotation ........................................... 24

Setting Blue screen ................................... 25

Menu Demo ............................................... 25

Setting VCR ............................................... 26

Selecting CCD ........................................... 26

Recalling On-screen display ...................... 26

ParentaM ControM ...................... 27

Setting Child lock ....................................... 27

Setting V-chip ............................................ 28

Other hformation ................... 31

Setting The Universal Remote Control Unit31

TroubMeshooting ...................... 38

Specifications .......................... 40

CAUTION-These servicing instructions are for use by

qualified service personnel onJy, To reduce

the risk of etectric shock, do not perform any

servicing other than that contained in the

operating instructions untess you are

qualified to do so.

The lightning flash with arrowhead symbol,

within an equilateral triangle is intended to

alert the user to the presenceof uninsulated

dangerous voltage within the product's

enclosurethat may be of sufficientmagnitude

to constitutea riskof electricshockto persons.

The exclamation point within an equilateral

triangle is intended to alert the user to the

presence of important operating and

maintenance (servicing)instructions in the

literatureaccompanyingthe appliance.

I WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. I

Before using the unit, be sure to read aH operating instructions carefully. Please note that these are general

precautions and may not pertain to your particular unit, For example_ this unit may not have the capability

to be connected to an outdoor antenna,

1. READ THESE INSTRUCTEONS

All the safety and operating instructions should be read before the product is operated.

2. KEEP THESE INSTRUCTIONS

The safety and operating instructions should be retained for future reference.

3. HEED ALL WARMNGS

All warnings on the product and in the operating instructions should be adhered to.

4. FOLLOW ALL INSTRUCTIONS

All operating and use instructions should be followed.

5. DO NOT USE TH_S APPARATUS NEAR WATER

Do not use this product near water (a bathtub, washbowl, kitchen sink, laundry tub, wet

basement, or swimming pool for example)

6. CLEAN ONLY WITH DRY CLOTH

Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a dry

cloth for cleaning.

7.ATTAC HM E NTS PORTABLECARTWARNING

Only use attachments/accessories specified by the manufacturer. (symbolprovidedbyRETAC)

8. ACCESSORIES

Do not place this product on an unstable cart, stand, tripod, bracket, or table. The

product may fall, causing serious injury and serious damage to the unit.

8A. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or

sold with the apparatus. When a cart is used, use caution when moving the

cart/apparatus combination to avoid injury from tip-over.

9. VENTILATION $3126A

DOnot block any ventilation openings, install in accordance with the manufacturer's instructions.

Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers)

that produce heat.

10. POWER SOURCES

This product should be operated only from the type of power source indicated on the marking label. If you are not

sure of the type of power supply to your home, consult your appliance dealer or local power company. For products

intended to operate from battery power, or other sources, refer to the operating instructions.

11. GROUNDING OR POLARIZATION

Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one

wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third

prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

12. POWER-CORD PROTECTION

Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point

where they exit from the apparatus.

13. LIGHTNING

Unplug this apparatus during lightning storms or when unused for long periods of time.

14. POWER LINES

An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or

power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system,

extreme care should be taken to keep from touching power lines or circuits as contact with them might be fatal.

15. OVERLOADING

Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.

16. OBJECTAND L_QUID ENTRY (C-UL standards)

Apparatus shall no t be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be

placed on the apparatus.

17. OUTDOORANTENNA GROUNDING

If an outside antenna is connected to the product, be sure the antenna system is grounded so as to provide some

protection against voltage surges and built-up static charges. Section 810 of the National Electric Code, ANSI/NFPA

70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the

lead-in wire to an antenna discharge product, size of grounding conductors, location of antenna discharge product,

connection to grounding electrodes, and requirements for grounding electrodes.

18. SERVICING

Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any

way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus,

the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

19. REPLACEMENT PARTS

When replacement parts are required, be sure the service technician uses replacement parts specified by the

manufacturer or those that have the same characteristics as the original part. Unauthorized substitutions may result

in fire, electric shock or other hazards.

20. SAFETYCHECK

Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to

determine that the product is in properoperating condition.

21. WALL OR CEILING MOUNTING

The product should be mounted to a wall or ceiling only as recommended by the manufacturer.

22. DAMAGE REQUIRING SERVICE

Unplug the product from the wall outlet and refer servicing to qualified service personnel under the following

conditions:

a. When the power-supply cord or plug is damaged.

b. If liquid has been spilled, or objects have fallen into the product.

c. If the product has been exposed to rain or water.

d. If the product does not operate normally after installation by following the operating instructions. Adjust only those

controls that are covered by the operating instructions, as adjustment of other controls may result in damage and

will often require extensive work by a qualified technician to restore the product to its normal operation.

e. If the product has been dropped or the cabinet has been damaged.

f. When the product exhibits a distinct change in performance.

23. HEAT

The product should be situated away from heat

sources such as radiators, heat registers, stoves,

or other products (including amplifiers) that

produce heat.

24. NOTE TO Cable SYSTEM INSTALLER

This reminder is provided to call the Cable system

installer's attention to Article 820-40 of the NEC

that provides guidelines for proper grounding

and, in particular, specifies that the cable ground

shall be connected to the grounding system of the

building, as close to the point of cable entry as

practical.

GROUND

CLAMP

ANTENNA

WIRE

ANTENNA

_ DISCHARGE UNIT

(NEC SECTION 810 20)

ELECTRIC

GROUNDING CONDUCTORS

EQUIPMENT (NEC SECTION 810 21)

POWER SERVICE GROUNDING

NEC NATIONAL ELECTRICAL CODE

$2898A (NECART 250, PART H)

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECTRICAL CODE

WARNING: FOR CONTINUED SAFETY, REPLACE SAFETY CRITICAL COMPONENTS

ONLY WITH MANUFACTURER'S PARTS TO

2 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!i_i!

ili!iii

T V/AV

........

VOL-

VOL+

cH+ 10

1. Power button

Press to turn the unit on or off.

2. Red indicator

This indicator lights up in STANDBY and working mode.

3. Green indicator

This indicator lights up in working mode.

4. Remote sensor

5. TV/AV button: video input select.

6. MENU button: to access the menu page.

7. VOL- button: volume down or menu adjust.

8. VOL+ button: volume up or menu adjust.

9. OH - button: channel down or menu select.

10. OH + button: channel up or menu select.

(continued)

S-VIDEO ]

©l

VIDEO I

L/MONO ]

Earphone jack

AV3 inputs

(S-VIDEO, VIDEO

AUDIO L/MONO,R)

Antenna input

S-ViDEO

VIDEO

L/MONO

AUDIO

\ ...... i

DV! inputs

Receivesthedigital

videosignalsfroma

set-topboxor PC.

(Digital only)

._--E] (e --ED(2)_

@@MONITOR

PROGRESSIVESCAN

/COMPONENTVIDEO

--(1)_(2)--

,I(o)/ I ((o]_,

t(S.WDEO,WDEO

AUDIOUMONO,R)

P_/C_

L/MONO

AUDIO

..................!i'_ F_?_i'_'_¸

/AUDIO inputs

{ Y,R(co),P0(c0)

D!oL!M ......

Connect to the audio and

componentvideooutputjacks

ofa DVD player or set-top box.

iiiiiii

(continued)

CH+/_ "Channel select or menu

item select

VOL+/_ ' Volume adjust or menu

item adjust

STEREO button:

To select STEREO,SAP or MONO

button: PLAY button ofVCR, DVD or

VCD player

SOUND button:

To select sound mode.

[] button: STOP button ofVCR, DVD or

VCD player

SCAN button:

To scan channeHs;

button: REWHND button ofVCR, DVD

orVCD pHayer

P_C button:

To select picture mode.

button: FFWD button of VCR, DVD or

VCD player

FREEZE button:

To freeze picture.

[] button: RECORD button of VCR.

ZOOM button:

To seHect picture aspect.

H button: PAUSE button for VCR, DVD

orVCD pHayer.

_The indicator lights up when

any button is pressed

Turn the unit on or off

Direct channel selector

__ Quickly returns to previous

J selected channel

Access the main menu

To select to view program from

external video equipment (VCR,

DVD, Set-Top Boxes ,etc_)

Sleep timer

-- To mute the sound

r i

_VCD/HIFI/DVD ISET

_2b, <_Lb-

vcR c._Tsb-Ti - u

d2p _',

To select favorite channels

To start menu demonstration

Omscreen display

To program the remote

search through codes_

To select products to

controlled with RC

Sta (continued)

If your remote control does not work correctly, the code setting may be incorrect. Please

try the following:

1. Press and hold the SET button and the Ty button at the same time untim the indicator lights

Up.

2. Press 1, 5, 3. The indicator of the remote control will blink twice, if not, please repeat the

above steps.

the battery cover.

tnstall two "AA"

batteries matching the

+/- polarities of the

battery to the +/- marks

inside the battery

compartment,

Replace the batter_

cover,

i:_ _ive range of the R_ _

Q [D

QDD

ooo

o o

ooo

Notes:

_- When there is an obstacle between the TV and the

transmitter, the transmitter may not operate.

When direct sunlight, and incandescent lamp, fluorescent

lamp or any other strong light shines on the REMOTE

SENSOR, the remote control function may be unstable.

Do not try to recharge batteries they are not intended to be

recharged.

Use only the size and type of batteries specified. Do not mix

different types of batteries together or old batteries with

fresh ones.

When the remote control will not be used for a long period of

time or when the batteries are worn out, remove the

batteries.

_, Do not throw the batteries into a fire. Dispose of or recycle

used batteries properly.

Do not drop, dampen or disassemble the remote control.

iiiii

i iiiiiii!i

INS TALL the unit in a room where direct light will not fall upon the screen. Total darkness or a reflection on the picture

screen may cause eyestrain. Soft and indirect tighting is recommended for comfortable viewing.

OUTDOOR VHF/UHF ANTENNA CONNECTmON (ANTENNA NOT mNCLUDED)

Follow the instructions for the type of antenna system you intend to use_ If using Cable or satellite, see

the next page.

Combination VHFIUHF

Antenna (Single 75 ohm cable or 300 ohm twin-lead wire)

Connect the 75 ohm cable from combination VHF/UHF antenna to the

antenna jack. OR

If your combination antenna has a 300 ohm twinqead wire, use a 300-75

ohm matching transformer (NOT SU PPU ED)_

,,._ VHF300

,. 0.2

Combination VHF/UHF

Antenna (Separate VHF and UHF 300 ohm twin-leads)

Connect the UHF twinqead wire to a combiner (NOT SUPPLIED).

Connect the VHF twin-lead to a 300-75 ohm matching transformer (NOT

SUPPUED). Attach the transformer to the combiner_ Attach the

combiner to the antenna jack_

Combiner

UHF 300 Ohm

VHF 75 Ohmj

Separate VHF/UHF Antennas

Connect the 75 ohm cable from the VHF antenna and the UHF antenna

twinqead wire to a combiner (NOT SUPPLED). Attach the combiner to

the antenna jack.

NOTE: If your VHF antenna has a twinqead wire use a 300-75 ohm

matching transformer, then connect the transformer to the combiner_

Rnstal (continued)

This TV has an extended tuning range and can tune most cable channels without using a Cable TV converter box.

Some Cable TV companies offer "premium pay channels" in which the signal is scrambled. Descrambling these

signals for normal viewing requires the use of a descrambler device which is generally provided by the cable

company.

FOR SUBSCRmBERS TO BASIC CABLE TV SERVICE

For basic cable service not requiring a converter!descrambler box,

connect the CATV 75 ohm coaxial cable to the VHF/UHF jack on the

rearofthe TW

FOR SUBSCRmBERS TO SCRAMBLED CABLE TV SERVICE OR SATELUTE

If you subscribe to a satellite service or a cable TV service which requires the use of a converter/

descrambler box, connect the incoming 75 ohm coaxial cable to the converter/descrambler box_ Using

another 75 ohm cable, connect the output of the converteridescrambler or satellite box to the antenna jack

on the TV. Follow the connections shown below. Set the TViVCR to the output channel of the

converteridescrambler or satellite box (usually 3 or 4) and use the converteridescrambler or satellite box to

select channels. CONVERTER/DESCRAM BLER

INCOMING OR SATELUTE BOX 75 OHM CABLE

75 OHM TO TV/VCR

FOR SUBSCRIBERS TO UNSCRAMBLED BASIC CABLE TV SERWCE

WroTH SCRAMBLED PREMmUM CHANNELS

If you subscribe to a satellite service or a cable TV service in which basic channels are unscrambled and

premium channels require the use of a converter/descrambler box, you may wish to use a signal splitter

and an A/B switch box (available from the cable company or an electronic supply store). Follow the

connections shown below. With the switch in the "B" position, you can directly tune any nonscrambled

channels on your TV. With the switch in the "A" position, tune your TV to the output of the

converteridescrambler box (usually channel 3 or 4) and use the converter!descrambler box to tune

scrambled channels.

CONVERTER/DESCRAMBLER

75 OHM

) cAB,E

SPUTTER A!B SWITCH

!!!!iii

iiii:iii lat io n(co°t ..ed)

Please refer to the owner's manual of your specific equipment as well.

S-V_DEC

V_DEC

L/MONC

AUDtC

Rear terminals

©© MONITOR

Signal

outputs

® Yellow (VIDEO)

@ White (AUDIO LiMONO)

® Red (AUDIO R )

QTo video

input

@To audio

inputs

VCR for recording

You can connect the MONITOR output terminals to the VCR to record the program you like.

OR you can connect a stereo system to the MONITOR output terminals on the TV set rear to

enjoy a high quality sound from the stereo system.

S-V_DEC

V_DEC

L/MONC

AUDtC

Rear terminals

_*_ _ (1) _ (2)-_

©© MONITOR

_[_m

Signal

® White (AUDIO LiMONO)

® Red (AUDIO R )

External Amplifier

Connect the MONITOR outputs to VCR

as the figure above.

Select the desired TV program that you

would like to record.

Press "RECORD" button of the VCR to

record TV program.

1 Connect the audio outputs to audio

amplifier as the figure above.

Set amplifier volume to minimum.

3Select the desired TV program that you

would like to amplify.

4Adjust amplifier to a proper volume.

[On (continued)

Please refer to the owner's manual of your specific equipment as we[[.

without Sovideo

terminal

VIDEO EQUIPMENT

outputs

To video i

output [

® Yellow (VIDEO)

® White (AUD[O L!MONO)

® Red (AUDIO R )

Rear terminals

f4£3(1)

©MONITOR

Signal

with S-video

terminal

VIDEO EQU[P['v'[ENT

To SoV[DEO

output ®

.£

Side terminals

S-VIDEO I

VIDEO I To video

Signal

_[3-(3},

inputs

To video

output

®To audio

outputs

1 Connect video equipments to AV inputs (AV1, AV2 or AV3) as the figures above.

Press AV to display video input menu.

3Select the corresponding video mode (Video1 , Video2 or Video3) by using CH+ or OH-.

4Press VOL+ or VOL- to confirm.

Notes:

in AVl, AV2, AV3 inputs, the S-VmDEOterminal takes precedence over the VIDEO terminal. To

view program from the VIDEO terminal, be sure to disconnect the S_V[DEO terminal.

iiiii

iiiiii

i liliiii!i

i!iiii

iii!,i!

lat io n(ooo.ooed)

Please refer to the owner's manuat of your specific equipment as well.

_/cornpon

(_) Yellow (video}

(_) white (audio L/MONO)

(_ red (audio R, PRIOR}

Green (Y)

(_ B_ue (PB!OB)

Signal

>- h'ou_putS

2 ....

SET-TOP BOX

Rear terminams

Rear of DVD player

If your DVD player is equipped with progressive

scan HD video output (Y, PB, PR), you can

optimize the picture quality by using component

video cables,

PROGRESSIVESCAN

/COMPONENTVIDEO

--(1)-- --(2)--

I m

I I

I m

m I

I I

If @

m m

L ....

TO audio

outputs

R ®

1Connect Set-Top Box(or DVD) to PROGRESSIVE SCAN/COMPONENT VIDEO (1 or 2) inputs as

the figure above.

Press AV to display video input menu.

3Select Component 1 or component 2 correspondingly by using CH+ or CH- according to the

terminals you connect.

4Press VOL+ or VOL_ to confirm.

Notes:

The Y, PB, PR outputs on your DVD player are sometimes labeled Y, CB, CRor Y, B-Y, R-Y. If so,

connect the cables to like colors.

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii11

On (continued)

Please refer to the owner's manual of your specific equipment as well.

_ i _Dv_aodAUDIOi_ i_:

Rear terminals

"E_ DWHDCP

\ ....

I L/MONO

"i -_ RIAUDIO

(_) white (audio L/MONO)

(_) red (audio R)

DTV Receiver

1Connect DTV receiver to DVl and AUDIO inputs as the figure above.

Press AV to display video input menu.

3Select DVI/HDCP by using CH+ or OH-.

4Press VOL+ or VOL- to confirm.

ii!i!iii

ACOutlet

_' ACPlug

TV 10

Mono

--Ii 2

tInsert the AC plug (with the 2 blades) into an AC outlet

(120V,60Nz)

If no picture appears and the indicator lights up, then the TV set is in

STANDBY mode. Please refer to step 2.

Notes:

TheAC plug supplied with the unit is polarized to help minimize the

possibility of electric shock. If the AC plug does not fit into a

nonpolarized AC outlet, do not file or cut the wide blade. It is the

user's responsibility to have an electrician replace the obsolete

outlet.

To prevent electric shock, do not use the

polarized plug with an extension cord

receptacle or other outlet unless the blades

can be fully inserted.

In STANDBY mode, press the power button on the

TV set or on the remote control to turn the TV on.

Press the Power button on the remote contro_ or on

the TV set to turn the TV off.

Not es:

The TV set can turn off automatically with the functions of:

Sleep timer (need to be set in advanced)_

Off timer (need to be set in advanced)_

Se Input

( i:_i_i_, iii_v__ i ii

J7i > 7

( iii__ (

2~3

This TV set provides AV inputtoutput terminals and DVD (HDTV)

input terminals for convenient connection to VCRs, DVDs, Set-Top

Boxes or other video equipments, and to optimize the high quality

picture from these video sources.

I Press AV to display the video input menu.

PressCH+orCH- to selecta

video input channel

Press VOL+ orVOL- to confirm.

Video 2

Video 3

Component 1

Component 2

DVItHDCP

When the TV set is in AV mode, there are two ways to switch back to TV

mode.

I Press AV button to display the video input menu.

PressCH+orCH- toselectTV

item.

Press VOL+ orVOL- to confirm.

Video 1

Video 2

Video 3

Component 1

Component 2

DVIIHDCP

> Directly press OH+ or OH: to switch back to TV

mode.

- ;;_ i¸

ii iiiiiiiii!ii,ii,,D,

VC_iiii_ iii_Vi_ S_'_ ¸

_Ci_ C_igi_ j_;_ ¸ _

7¸¸ , _

2~5

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii!;J!15

Press MENU to display the OSD menu,

Press VOL+ or VOL- to select | icon,

Press CH- repeatedly to select Search item,

Press VOL+ or VOL- to start

auto search,

All active channels wi{I be stored

into memory automatically_

Notes"

Press the VOL+ or VOL- ifyou want Auto memory,, ,Stop:c=_>

to stop AUTO SEARCH.

1Press MENU to display the OSD menu,

2 Press VOL+ or VOL- to select | icon,

Press CH- twice to select TV/Cabme item,

Press VOL+ or VOL- to select

TV or Cable,

In TV mode, the set receives antenna

signals. In Cable mode the set receives

Cable TV programs. Please select:

TV: If using VHF/UHFantenna.

Cable: If using CableTV. Adjust:<_q _ TV/Cable

Press MENU to display the OSD menu,

PressVOL+orVOL- tose_ect | icon,

Press CH- repeatedly to select Labeling item,

Press VOL+ to access labe_

editing mode.

mn labe_ editing mode, use

VOL+/- to move cursor and

CH+/-to select character.

The unit allows you to set every channel

respectively with a label no more than

four characters.

Labeling setting: ÷

.f_Character. d,S Move:¢_

(continued)

'jiii! !i!!7¸¸¸ ::7 :iiiii,iiiiiY:

VC{Jiiif_7i_> 7

Press MENU to display the OSO menu,

PressVOL+orVOL- toselect[_ icon.

Press CH- to select Channel item.

Press VOL+ or VOL- to select

an unwanted channel number,

Press CH- twice to select

Add/Erase item,

Press VOL+ or VOL- to select

Erase.

The "erased" channel will be skipped

when you browse channels by CH+ or

OH- button.

To view a skipped channel, use digit

keys to select the "erased" channel,

Then repeat the above steps and set

the Add/Erase item to Add.

Add/Erase : <z>

Add/Erase : _-

Press MENU to display the OSD menu.

Press VOL+ orVOL- to select | icon.

Press OH- to select Channel item.

Press VOL+ orVOL- to select a channel number.

Press OH- repeatedly to select Favorite item.

Press VOL+ orVOL- to select ¢or ×,

You can repeat the above steps

to set more favorite channels so

that you can cycle your favorite

channels by pressing the FAVO

button_

Select:<_ _> ,/

iiilii C

see the Tuning section to set the TV!Cab!e input.

When you select TV, only channels received on antenna can be selected;

When you select Cable, channels received on cable can be selected.

tUse Direct Channel Selector (0-9 and ---)

To select one-digit channel:

@ Press one of the 0-9 digit keys and wait for 2 seconds.

To select two-digit channel:

o Input the channel using the digit keys. Be sure to enter the

channel within 2 seconds.

select three-digit channel: (Available in "Cable" mode only)

Press "---" to display "1--".

Press two digit keys to input the remaining two digits of the

channel. For example, to select channel 124, press "---", press 2,

then press 4.

Use OH+ or CHo button

Press CN+, the channel number increases;

Press CH-, the channel numberdecreases.

Previous channel _ button

Press this button to switch between the current channel and the

previous channel.

Press the SCAN button, the TV set

scans all channels one by one.

Every channel win be displayed for 2

seconds.

This function helps you to quickly

browse all active programs, Press any

button can stop Channel Scanning. Channel Scanning

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_iii!ii17

ure

J7i > 7

( ii>t

2~3

PIO

t Press MENU to display the

OSD menu,

Press OH- to select item.

3Press VOL+ or VOL- to adjust, Adjust:4_ @E...................................I

Item VOL- VOL+

Contrast Minus Plus

Brightness darker lighter

Color paler deeper

Sharpness softer sharper

Tint purplish greenish

DNR Switch between Off, Soft, Mild and Hard

SVM Switch between ,/and

DNR

SVM

Reduces noise in the channel, commonly called

snow.

Increase picture sharpness and provides crisp

white to black transitions.

There are three preset picture modes (Movie, Standard and Sports) and

one user-set picture mode (Custom).

Each preset mode has its own picture settings (Color, Brightness,

Contrast, Sharpness and Tint).

Using PIC button can select picture mode.

Movie: Select for a finely detailed picture.

Sports: Select for a bright picture.

Standard: Select for a standard picture.

Adjusted settings are stored in Custom mode.

Press ZOOM to select picture size (ratio) between 16:9 and 4:3 according

to you r preference.

This feature is used to freeze picture, when the FREEZE button is

pressed.

Press the FREEZE button again to restore.

18!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!ii

iii!_!!i_ii

Sou

V_iiii_ iii_Vi_ S_ ¸

_Ci_ _igi_i_;_ ¸ _

7¸¸ , _

ust ngv

VOL+ or VOL- button.

Press VOL+ to increase the volume.

Press VOL- to decrease the volume.

The minimum volume is 0 and the

maximum volume is 100. Volume 30

F_ [q

MUTE button.

To mute the sound, press MUTE on the

remote.

To restore the sound, press MUTE

again, or press the VOL+ or VOL-

button.

d, Mute

[-_ FI

If the program you are watching is "STEREO" or "SAP", you can

select audio mode by using the STEREO button on the remote

controller. The audio mode changes as follows.

MONO ................STEREO (if the program is STEREO)

MONO ...................::,SAP (if the program is SAP)

MONO .........................,' STEREO ' SAP (If the program is

STEREO & SAP)

¸7¸¸i¸¸i¸¸i¸iiTili_

J7i > 7

':ii iii:___i :_

2~4

Press MENU to display the OSD menu,

Press VOL+ or VOL- to select [] icon,

Press OH- to select item.

Press VOL+ orVOL- to adjust,

Adjust:<= _> ?

Item VOL- VOL+

Bass Minus Plus

Treble Minus Plus

Surround Minus Plus

decreases the decreases the

Balance right channel left channel

Loudness Switch between ,/and ×

AVC Switch between ,/and x

Surround--Produces a dynamic three dimensional

sound for stereo audio signals.

Loudness -- To promote volume.

AVC Auto Volume Control, to control volume when

changing channel.

There are three preset sound modes (News, Music and Movie)

and one user-set sound mode (Custom).

Each preset mode has it's own sound settings (Bass, Treble,

Surround and Balance).

Use the Sound button to select the sound mode.

News: Select for a speech or conversation program.

Music: Select for a music program.

Movie: Select for a movie program.

The adjusted settings are stored in Custom mode_

iiiii

<!!!!ii_iiiiii,!!!!!iiii iii!iiilD,

VC_ii•ii_ iii_Vi_ S_ ¸

2~4

it ng

t Press MENU to display the OSD menu,

2 Press VOL+ or VOL- to select [] icon,

Press CH- to select Timer off

item,

Press VOL+ or VOL- to set an

OFFtime°

The OFF time cycles between Adjust:_ 10-240Min.

10,20,30 ........ 230,240 or- - -.

For example, if you would like the TV to turn off automatically in

60 minutes, press the VOL+ or VOL- until 60 appears. In 60

minutes the set will turn off automatically. To turn off the Timer

off function, press VOLe orVOLo until %__"appears.

ngsmeopT_ :

You can quickly set the sleep timer by using the SLP button.

With every press of this button the sleep time changes as

follows:

OFF_10 Min_20 Min_ o..... 4110 Min_120 Min_

For example, you would like the TV

to auto turn off in 60 minutes, you

can press SLP repeatedly until the

screen displays the desired

amount of time. If you want to

cancel the sleep timer, you can

press SLP repeatedly until "Off"

displays on the screen_

Sleep: 60 Min.

Timer(oon.nued)

.......ii!!!!i!ii,ii!!!!!!!::,

i_ _ :i!_i _: i_i_! _:i!i_!: i¸¸ i_ ¸

'CIIIII:'__, ,,: _

2~4

it ng

t Press MENU to display the OSO menu,

PressVOL+orVOL- tose_ect [] icon,

3Press CH° repeatedly to select

Timer on item,

Press VOL+ or VOL- to set an

ON time.

The ON time cycles between

10,20,30 ........ 230,240 or- - -. Adjust:_o 10-240Min,

For example, if you would like the TV to turn on automatically in

60 minutes, press the VOL+ or VOL_ until 60 appears. Turn the

set off. In 60 minutes the set will turn on to the pre programmed

channel. To turn off the Timer on function, press VOL+ or VOU

until "_ __"appears.

Press MENU to display the OSO menu.

PressVOL+orVOL- tose_ect [] icon,

Press Clio repeatedly to select

Timer Pr, item,

Press VOL+ or VOL- to set a

time,

Adjust:4_ _ t0-240Min.

The Timer Pr. cycles between 10,20,30 ........ 230,240 or-- -.

The set auto switches to the channel set in Prog. No. item

when the time selected in the Timer Pr. item has elapsed.

To turn off the Timer Pr. function, press VOL+ or VOL_ until

"_ - _" appears.

ili!iii

<i!!!!i i i iiiii,!!i!!!iiiiiiii iiiiiiiii!iiii,D

VC_ii•ii_ iii_Vi_ S_ ¸

2~6

Press MENU to display the OSD menu,

Press VOL+ or VOL- to select [] icon,

Press OH- repeatedly to select Prog, No, item,

Press VOL+ or VOL- to select

a channe_ number,

Press CH- to select TV/Cabme

item,

Press VOL+ or VOL- to select

TV or Cabme, Adjust:<==> 2-69

Setting the Prog. No. item is necessary if you would like to use

the function of Timer on or Timer Pr.

For example, TV channel 10 is set. When the function of Timer

on or Timer Pr. is executed, the set auto switches to TV

channel 10.

Press MENU to display the OSD menu.

PressVOL+orVOL- tose_ect [] icon,

Press OH- repeatedly to select

Alarm item,

Press VOL+ or VOL- to set an

alarm time,

Adjust:_o t0-240Min.

The alarm time cycles between 10,20,30 ........ 230,240 or- - -.

The set auto alarms when the time selected in the Alarm item

has elapsed.

To turn off the Alarm function, press VOL+ or VOL_ repeatedly

to select "- _-"

Notes"

Be sure to note that the Alarm function only effects when the

set is in working mode_

System P

0!i! .......ii!!!!i!ii,ii!!!!!!!),

ii_i]!]!![{i:![C_

i_ _ :i!il ;i i_i_! ;;i!i_!: i¸¸ i_ ¸

'_;iiiiiii:'__, ,,: _

2~4

tPress MENU to display the OSD menu,

2 PressVOL+orVOL- toselect [] icon,

Press OH- to select Language

item,

Press VOL+ or VOL- to semect

an OSD manguage,

There are three OSD languages in

this TV set: English, French and

Spanish. English Fran¢ais EspaSol

When the TV set is magnetized, the picture on the screen may be

uneven in color. This function helps you to eliminate magnetization.

t Press MENU to display the OSD menu.

Press VOL+ or VOL- to select [] icon.

3Press OH- repeatedly to select

Degauss item.

Press VOL+ or VOL- to

degauss the set.

Degauss Adiust:_q_

ture

When you switch on your TV, there may be a slight tilt of the picture

to the left or right. This is due to the earth's magnetic field or position

of your TV. This function helps you to rectify.

t Press MENU to display the OSD menu.

PressVOL+orVOL- tose_ect _ icon,

Press OH- repeatedly to select

Rotation item.

Press VOL+ or VOL- to adjust.

Adiust:_ -32-+31

ii Jill

i!ii

iiii System Setup{cont nued

i_ii%iliii iiiiiiiii!ii,ii,,ii_!_>

VC V

_Ci_ C_bi_iS_ ¸ _

7¸¸ , _

2-4

1Press MENU to display the OSD menu,

2 PressVOL+orVOL- tose_ect _ icon,

Press OH- repeatedly to select B_ue screen item,

Press VOL+ or VOL- to select

,/or×,

If the Blue Screen is set to ,/, the TV

set will display a blue background when

there is no input signal.

Adjust:<=o ,/

You can quickly start the menu demonstration by using the DEMO

button on the remote control. When you press DEMO, the TV set

starts the menu demonstration, which shows you how to use the

menu.

=Or=

Press MENU to display the OSD menu.

PressVOL+orVOL- tose_ect [] icon,

Press CH- repeatedly to select

Menu Demo item,

PressVOL+orVOL- to start,

Notes:

The menu demonstration stops if

any button is presse& Select:©o

System Setu p cont nued

,:!!i!i,iiiii!!!iiii _iii!_iii!iiiii?,¸

,:!_!i!!!i_iii!!!!_!!_ii!i ....iiii!!_!!ili!!!!_!::_¸

:,i,!!!_!i!i!!!!::,:iii_,_i!!i,li!,!,iiii:_

i_ _ :i!_i ;i i_i_! ;;i!i_!: i¸¸ i_ ¸

,_iiiiiiiiiii:,__, ,,_ _

2~4

Press MENU to display the OSD menu,

2 PressVOL+orVOL- tose_ect [] icon,

Press CH- repeatedly to select VCR item,

Press VOL+ or VOL- to select

,/or*.

Turn on this item when you are watching

VCR program type. It helps to improve

the stability of the picture.

Select:¢_ Off-T4

I Press MENU to display the OSD menu.

2 PressVOL+orVOL- tose_ect [] icon,

Press OH- repeatedly to select CCD select item,

Press VOL+orVOL- to select,

You can select the caption data

channel (C1/C21C3/C4), the text

service channel (TI/T21T3/T4) or turn

off Closed Captioning (Off).

Notes: Select:¢_> Off*T4

1.Some TV programs may not be broadcasted with closed caption

signals, and therefore, the TV will not be able to display captions.

Also, text information is not offered by all stations.

2.Some TV programs only provide one channel caption, one channel

text, or only caption without text.

You can press the DSP button on the

remote contro_ to display the On-screen

display.

Press DSP once and the channel number

and audio mode are displayed for a brief

time. To cancel the on-screen display,

press DSP again or wait for it to

automatically disappear.

TV 10

MONO

ii iiliii

ili!!i_i

%ii:!i!iiii!;i_ili!ii%_ii

CiV

VCi_ C_ai_ ¸ i_F

--4

2~3

Press MENU to display the OSD menu.

PressVOL+orVOL- tose_ect [] icon.

Press CH- repeatedly to select

Child _ock item.

Press 0-9 digit keys to enter

password.

The default password to enter ChiJd

lock menu is 0000 and you can change Enter password 0-9

it in the Chitd lock menu as follows:

From the Child lock menu, Press

CN_ repeatedly to select New

password item.

Input a new password by using 0_9

digit keys_ Press MENU to confirm

after you finish inputting the new

password.

Important:

Press _ key to confirm

Be sure to write down your password and retain it for future use.

If you forget the password, please input 4,3,2,1 in order to access

the Child lock menu.

Select Channe_ item in the Child _ock menu.

Press VOL+ or VOL- to select a channe_ you want to

_ock.

Press CH- to select TV/Cabme.

Press VOL+ or VOL- to select TV or Cabme.

Press CH- to select Child _ock.

Press VOL+ or VOL- to select

,/or ×,

When the Child _ock item is set to ,/,

the channel you select will be locked.

When you select a locked channel, the

screen displays the following: "Notice:

Child Lock Function Active Now ".

Child Lock: ¢_ ,/

Co !i!il

(continued)

V-Chic enables parents to prevent their children from watching inappropriate material on TV. V-Chic reads

the ratings for programming (except for news, sports, unedited movies on premium cable and Emergency

System signals ), then denies access to programming ff the program's rating meets the limitations you

select. In this case the program will be blocked.

ii171iii77!i71%11;7;71i

_ii!_ •...... ii 7!1!! '

C 7iV> S

_iC_ _i_bi-iS_" "_'_

I Press MENU to display the OSD menu.

2 PressVOL+orVOL- toselect [] icon.

3Press ON- repeatedly to select

V-chip menu item.

Press 0-9 digit keys to enter

password.

The default password to enter V-chip

menu is 4321 and you can change it in Press @ keyto confirm

the V-chip menu as foNows:

From the V-chip menu, Press CH- repeatedly to select New

password item.

input a new password by using 0=9digit keys. Press MENU to confirm

after you finish inputting the new password.

(l) Important:

1) Be sure to write down your password and retain it for future use.

If you forget the password, please input 4,3,2,1 in order to

access the V-chic menu.

2) To enable V-chic setting, you should set Block item to ON.

Rating guidelines are provkJed by broadcast stations. Most television

programs and television movies can be blocked by TV Rating and!or

Individual Categories. Movies that have been shown at the theaters or

direct-to-video movies use the Movie Rating System (MPAA) only.

Select MPAA Rating item in the V-chip menu.

Press VOL+ or VOL- to enter IVlPAA Rating menu.

Press OH- to select desired rating.

, Press VOL+ or VOL- to select Block or View.

Movie Ratings:

* Unblocked

* G and Above (general audience)

* PG and Above (parental guidance suggested)

* PG-I 3 and Above (13 years and up)

* R andAbove (restricted)

* NC-I 7 and Above (18 years and up)

*X (adult) Setect:_=> [] Block [] View

Note: if you finish Setting MPAA Rating, you Can press MENU to

go back to V-chip menu.

ii!ii

(continued)

dii_iii!:iZi_:!ii iilfi_i:_i_i i i

_ii•iinii_Vi_ s_r ¸

7¸¸ , _

1~4

TV Parental Guidelines may have one or more letters added to the

basic rating to let parents know when a show contains higher levels of

violence, sex, adult language or suggestive dialogue:

From the V-clip menu, press CH_ repeatedly to select TV

Rating item.

Press VOL+ or VOL- to enter TV Rating menu.

Press Clio to select desired rating.

Press VOL+ or VOL- to select Block or View.

Se[ect:_ _ Block _ View Adjust:¢_ Exit:

TV=Y

TV=Y7

TV=G

TV=PG

TV=14

TV=MA

FORALL CHLDREN:

Content specifically geared to young viewers ages 2-6,

FORAGE 7AND OLDER:

May contain mild physical or comedic violence which may

frighten children under 7,

GENERALAUDIENCE:

Contains little or no violence, strong language, or sexual dialogue

or Situations,

PARENTAL GUIDANCE:

May contain infrequent coarse language, limited violence, some

suggestive sexual dialogue and Situations,

PARENTS CAUTIONED:

May contain sophisticated themes, sexual situations, strong

language, and more intense violence,

MATUREAUD[ENCE:

May contain mature themes, profane language, graphic

violence, and Sexual situations,

vFantasy Violence

Violence

Sexual Situations

Adult Language

Sexually Suggestive Dialogue

go back to V-chip menu.

Co (continued) :

,:!'_!i_i,i!_¸¸_¸_'_,......._ii!!!!i!ii,ii!!!!!!?

i_ _ :i!_i ;i i_i_! ;;i!i_!: i¸¸ i_ ¸

'_;iiiiiiiiii::__, ,,: _

1~4

Canadian Eric

From the V-chip menu, press CH_ repeatedJy to select

Canadian English item.

Press VOL+ or VOL- to enter Canadian English rating

menu,

Press OH- to select desired rating,

Press VOL+ or VOL- to select Brock or View,

Canadian EngJish Language Ratings:

E :Exempt.

C :Children.

C8+ :Children 8 years and older.

G :General programming,

suitable for all audiences.

PG :Parental guidance.

14+ :Viewers 14 years and older.

18+ :Adult programming. SeJect:Oo [] B_ock [] View

Note: H: Y0u finish sett!ng Canadian Eng!ish rating, you can

press MENU to go back to V-chip menu

C.nad an

From the V-chip menu, press CH- repeatedly to select

Canadian French item.

Press VOL+ or VOL- to enter Canadian French rating

menu,

Press CH- to select desired rating.

Press VOL+ or VOL- to select Block or View.

Canadian French Language Ratings:

E :Exempt.

G :Children.

8 ans+ :Children 8 years and older.

13 ans+ :Children 13 years and older.

16 ans+ :Viewers 16 years and older.

18 ans+ :Adult programming. Select:_o [] Block [] View

Note: JfY0u finish Setting Canadian French rating, You Can press

MENU to go back to V-chip menu.

ii!ii!ii!ii!ili ;r

Your Universal Remote Control is already programmed to operate your TV (just press the TV

button). You may also program the Universal Remote Control to operate other devices.

Locate the correct code for the Brand/Model of the device you wish to control from the attached

code list.

1 Press and hold the SET key and then press the key that corresponds to the device you wish to control

(TV, VCR, Cable/SAT, or DVD/VCD/HIFI).

2 Enter one of the 3-digit code for your Brand/Model from the lisL

3 The LED indicatorwill blinktwice.

If the correct code has been entered, all the functions of the device you wish to control should

operate. Some of the codes will control some but not all of the functions of your device. If this

occurs, repeat the above 3 steps using another 3 digit code from the code list that corresponds to

your Brand/Model.

Notes:

> Note: Do not exceed 5 seconds between each step.

1 Hold SET and press 1 simultaneously then release_ The number of times LED indicator represents the

number of the 1stdigit.

2 Hold SET and press 2 simultaneously then release. The number of times LED indicator represents the

number of the 2nddigit.

3 Hold SET and press 3 simultaneously then release_ The number of times LED indicator represents the

numberofthe 3'ddigit.

If you can not locate the appropriate code for your Brand/Model, you can try "Quick Search".

1 Turn the device you wish to control ON.

2 Locate the key, on the Universal Remote Control, for the device you want to operate (TV, VCR,

Cable/SAT, or DVD/VCD/HIFI). Press this key for 3 seconds, then release. The "Quick Search" mode is

on when the LED indicator blinks.

3 When the device you wish to control shuts off, immediately press the SET key and release.

If the correct code has been found, all the functions of the device you wish to control should

operate. If not, repeat the above steps 1 -3.

Your Universal Remote Control is already programmed to operate your TV (just press the TV

button). If you have programmed the Universal Remote Control to operate other devices, you must

press the key that corresponds to the device you wish to control (TV, VCR, Cable/SAT, or

DVDiVCDiHIFI).

DEVICE NAME FOR DEVfCE TOTAL CODES ACTIVE DEVICE CODE

TV TV/CTViTXT 304 001-304

VCR VCR 384 001-384

CAB!SAT 270 001=270

DVD!VCD!HIFI DVD!VCDtHIFI 292 001-292

BRAND CODE

VCR

CAB/SAT

DVD/VCD/HJFI

32 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!_'_

ii!ii!ii!ii!ili ;r

7. CODE UST ON SETUP MODE OR QUICK SEARCH MODE

TV codes

ADMIRAL 143 146 147 148 MAGNAVOX 013 207 208 209 210

001 002 133 134 142 153 155 METZ 132 217 218 219 220 221

ADVENT 157 MITSUBISHI 014 048 211 212 213

AIKO 026 MIVAR 070 131 214 215 216

AIWA 039 058 NEC 029 056 227 228 229 230

AKA! 073 079 084 085 101 107 109 NIKKO 026 222 223 224 225 226

111 123 125

AUD!OVOX 026 NOBLEX 031 231 232 233 234 235

BLUEHOUSE 150 NOKIA 035 036 236 237 238 239

OPTA 129 240 241 242 243 244

CCE 126 127 149 I50 015 020 046 047 061 062 078

026 030 040 080 081 082 086 PANASONIC

DAEWOO 096 097 122 245 246

128 151 152

PEONY 038 042 260 261 262 263

001 002 133 134 142 153 155

DIGISTAR 157 PHILCO 026 030 247 248 249 250

DISH 146 PHIMPS 013 072 124 251 252 253 254

255 256 257 258 259

ELBE 089 130 103 154 PIONEER 055 151 264 265 266 267 268

EMERSON 030 137 143 153 001 002 133 134 142 153 155

FINLUX 034 135 155 156 157 PRIMA 157

FIRSTLINE 136 160 161 162 163 RCA 068 147 269 270 271 272 273

FISHER 088 164 165 166 167 SAMSUNG 021 037 038 07I 094 285

FUNA! 057 059 060 158 159 022 025 052 053 064 090 108

GINXIN 113 SANYO 138 139 140 286 287

027 171 172 173 174 178 179 SEARS 064 288 289 290

GOLDSTAR 180 181 SELECO 087 105

GRADIENTE 024 029 168 169 170 SHARP 016 054 063 274 275 276

GRUNDIG 028 077 175 176 177 SlNUDYNE 074 075 076 091

HITACH! 019 099 050 182 183 017 049 069 098 277 278 279

HUGHES 148 SONY 280 281 282 283 284

ITT-NOKIA 102 110 112 184 185 TEKNIKA 026

001 002 133 134 142 153 155 THOMSON 067 083 093

JENSEN 157 TOBO 119

011 012 032 033 045 066 095

JVC 018 023 051 065 100 298 299

186 187 188 TOSHIBA 300

KASEIKYOU 047 189 I90 191 192 WHITE-WESTING 001 002 133 134 142 153 155

LG 027 193 194 195 196 HOUSE 157

LG-GOLDSTAR 092 104 106 205 206 YAMAHA 145

LOEWE 129 201 202 203 204 ZENITH 026 030 143 144 301 302

LUXOR 125 197 198 199 200

D VD/VCD/HIFi codes

ADVENT 147

AIWA 021

AKAI 145

ALCO 145

BLUEHOUSE 123

DENON 018 061 062 107 108 121

DMTECH 050 096 122 123 124 125

FISHER 143

016 050 126 127 128 129

GRUNDIG 130 131 132 241 242 243

244 245

063 109 138 139 140 141

HARMAN 142 143 246 247 248 249

250

024 025 133 134 136 136

HITACH! 137 142 251 252 253 254

050 255 256 257 258 259

IRT 260

JENSEN 147

006 017 047 048 051 054

JVC 060 064 066 093 094 097

100 106 110 111

122 261 262 263 264 265

JX2033G 266

063 109 144 145 146 147

KARDON 148

008 029 030 031 032 039

KENWOOD 043 066 075 076 078 085

089 112 138 140 141

136 137 138 139 140 149

LENCO 150

MAGNAT 050 235 236 237

067 113 154 155 156 157

MAGNAVOX 158

013 159 160 161 162 163

MATSU! 164

009 174 175 176 177 178

MICROMEGA 179

010 045 068 091 114 165

MITSUBISH! 166 167 168 169 170 171

172 173

144 267 268 269 270 271

NORDMENDE 272

022 067 069 113 115 134

ONKYO 135 187 188

004 181 182 183 184 185

OPTIMUS 186

042 044 059 088 090 105

ORION 120 180

002 018 019 020 062 061

PANASONIC 098 107 133 189 190 191

192 193 194

023 067 070 113 116 195

PHILIPS 196197

004 034 04I 080 087 132

PIONEER 198 199 200 201

PRIMA 147

071 117 202 203 204 205

PROSCAN 206 207 208

071 117 209 210 211 212

RCA 213 214

011 014 015 049 095 226

SAMSUNG 227 228

007 033 040 066 067 079

SANYO 086 102 103 121 131 229

230 231 232 233 234

026 130 215 216 217 218

SHARP 219 220 221

072 118 126 127 128 129

SHERWOOD 238 239

001 054 055 101 125 222

SONY 223 224 225

004 061 107 124 273 274

TECHNICS 275

THOMSON 012 046 092 240

003 005 031 042 063 058

TOSHIBA 059 067 077 088 099 104

105 113

060 276 277 278 279 280

VIDEOWAY 281

119 282 283 284 285 286

WANLIDE 287

035 036 037 038 061 081

YAMAHA 082 083 084 107 288

ZENITH 067 113 289 290

ii!ii!ii!ii!ili ;r

CABLE/SA TELMTE codes

ALPHASTIR 097

029 030 031 032 065

AMSTRAD 066 067 068 092

AMWAY 098

059 097 098 099 140

ATLANTA 141 142 143

055 094 095 096 136

ATRANTA 137 138 139

074 100 101 102 144

BT 145 146 147

CABLE 114

INNOVATIONS

011 014 017 103 148

CABLEVIEW 149

CENTURY 100

CHANNEL 101 150 151 152 153

MASTER

CHAPANAL 102 133 158 159 160

CHEYENNE 133 154 155 156 157

C! SATELLITE 099 167 168 169

CINAL+ 044 081 170 171 172

011 014 017 104 165

CITIZEN 166

CITOH 134 161 162 163 164

CONILER 103 173 174 175 176

CURTIS-MATHES 001 006 055 059 104

085 110 111 112 177

D-BOX 178 179 180

019 107 108 109 181

DEHAN 182 183 184

105 106 107 108 109

DIRECTV 110 111

DiSH 095

DISHPLAYER 135 185 186 187 188

DRAHE 112

DX ANTENNA 025 123

026 041 042 043 045

ECHOSTAR 078 079 080 189 190

050 089 113 114 191

FORCE 192 193

FUJITSU 113 194 195 196 197

GALAXIS 035 049 088 123 124

GENERAL 025 114 124

INSTRUMENT

002 004 020 056 082

G! 122

G!/JERROLD 056 125 126 127 128

018 115 116 117 118

GOLDSTAR 198 199 200 201

033 069 119 120 121

GRUNDiG 202 203 204

008 012 015 061 129

HAMLIN KARDON 205

HEME CABLE 115 206 207 208 209

HITACHI 105 210 211 212 213

HOUSTON 045 214 215 216 217

TRACKER

096 105 106 107 108

HUGHES 109 110 111

INNTERSAT 117 218 219 220 221

IO 116 222 223 224 225

JANEIL 113 226 227 228 229

002 004 020 056 077

082 138 139 140 141

JERROLD 142 143 230 231 232

233

038 039 074 075 130

JVC 131 132 133 134 135

136 137 234

KATHREIN 036 037 072 073

LEGEND 132

018 144 145 146 147

LG 148 235 236 237 238

023 024 130 149 150

MAGNAVOX 151 152 245 246

053 093 119 153 154

MASCOM 155 156 157 239 240

036 158 159 160 161

MASPRO 162 241 242 243 244

MEMGREX 130 247 248 249 250

087 163 164 165 166

NOKIA 167 251 252 253 254

NORSAT 103

005 013 058 168 169

OAK 170 255 256

OPTIMUS 130 257 258 259 260

ORB 120

PACE 048 052 086 261 262

009 010 040 062 063

PANASONIC 076 171 172 173 174

175 176

PANSAT 121

034 047 070 084 130

PHILiPS 177 178 179 180 181

182 183 184

PHONOTREND 035

PICO 122

003 057 185 186 263

PIONEER 264 265

PRIMESTAR 025

PROSCAN 131

QUICK ORA, W 123 266 267 268 269

RADIO SHACK 114 124

RAMSEY 122

009 010 021 062 063

RCA 094 131 270

REALISTIC 129

REGAL 008 012 015 061

RFT 035

RURAL CABLE 124

SAGEM 046

SAMSUNG 003 016 027 057 125

SATLANTA 001 006

SELECTOR 090

SIERRA 133

SIGMA 005 013 058

SKY 028 064

SKYMASTER 035 071

SL MARX 016

SONY 022

STAR SIGHT 131

STAR TRAK 120

STRONG 126

STS 116

SUPER GUIDE 127

TA]HAN 019

TCE 131

TEECOM 128

THOMSON 019

TOSHIBA 104 119

TPS 046 083

TRIAX 051 054 091

UNIDEN 114 115 129 130

VIDEO CIPHER H 113

VIDEOWAY 060

ZENITH 007 060 104 112 113

(continued)

VCR codes

ADMIRAL 024

ADVENT 138 139

ADVENTURE 138139

AIKO 138

111 114 136 028 031 051

AIWA 085 096 138 139 140 141

184

003 026 029 030 089 090

098 099 101 108 132 137

AKA! 139 142 175 177 185 186

187 188

ALLEGRO 188

ALOSTAY 113 157 158 159 160 161

AMERICAN HIGH 173 174

ANITECH 118 131 148 149 150 151

ASHA 041

AUDIO DYNAMICS 074

AUD!OVOX 032

AUSTAR 117 143 144 145 146 147

AUTOVOX 119 152 153 154 155 156

BAIRD 102 162 163 164 165 166

BEAUMAIK 041

BELL&HOWELL 038

B!OKSONIC 056

BROKSONIC 140 141 144

108 128 133 134 167

BSR 168 169 170

CALIX 032

032 037 041 074 160 164

CANDLE 189

CANON 165 172 173 174

CAPEHART 161

CARVER 180

CCE 145 166

032 037 041 074 160 164

CITIZEN 166 189

COLORTYME 074

COLT 145

CRAIG 032 041 145 147

041 074 139 146 174 171

CURTIS-MATHES 172 189

CYBERNEX 04I

037 042 043 069 138 141

160 161 164 166 171 172

DAEWOO 173 174 175 176 177 178

179

DAYTRON 161 162

DBX 014 074

DIMENSIA 171

DUAL-TEC 120 180 181 182 183 184

DYNATECH 138 139

ELBE 100 185 186 187 188 189

ELECTROHOME 032 177

ELECTROPHONIC 032

032 037 086 138 139 140

EMERSON 141 156 188 I62 173 174

176 177 184 186 191

FERGUSON 104 190 191 192 193 194

035 074 095 103 142 147

FISHER 154 180 195 196 197 198

FUJI 003 173 174

FUNAI 138 139

GARRARD 138

GE 152 171 172 173 174

GOLDSTAR 032 074

GO-VIDEO 039 148

GRADIENTE 138

GRANDA 094 110 199 200 201 202

GRUNDIG 055 070 071 091 092 093

HARMAN 074 138

HARWOOD 145

HEADQUARTER 035

HINAR! 097 130 206 207 208 209

H!-Q 147

027 033 034 139 149 150

HITACHI 175 204 205

INNOHT 105 210 211 212 213 214

INSTANT 139 173 174

REPLAY

INTEQ 032

IRRADIO 082 215 216 217 218 219

014 032 035 041 074 149

JC PENNEY 150 172 174 175

JCL 173 174

JENSEN 149 175

014 015 022 044 048 049

JVC 052 083 084 074 077 078

079080 115 116 175 188

KATHREIN 036 037 072 073 220 221

KENWOOD 014 074 175 189

KLH 148 151

KODAK 032 173 174

LG 038 222 223 224 228 226

LG-GOLDSTAR 032 106 107 231 232 233

LLOYD 138 139

LOEWE 020 127 227 228 229 230

LOGIK 145

LXI 032

MAGNAVOX 172 173 174 180

ii!ii!ii!ii!ili ;r

VCR codes

MAGNIN 041

014 035 074 121 144 174

MARANTZ 180 189 242 243 244 245

246

MARDS 173

MARTA 032

MASUSHITA 173 174

MATSU! 056 057 234 235 236 237

MEI 173 174

024 032 035 041 138 139

MEMGREX 147 173 174 185

MGA 176 177

MGN TECHNOLOGY 041

MIDLAND 152

MINOLTA 149

014 046 047 063 149 176

MITSUBISH! 177 183 191 238 239 240

MOTOROLA 024173 174

MTC 04I 138 139

MULTITECH 041 138 139 142 152

014 035 074 075 144 146

NEC 175 189 248 249 250 251

NIKKO 032

NOBLEX 04I

NORDMENDE 083 252 253 254 255

OLYMPUS 173 174

OPTIMUS 021 024 032 153

OPTONICA 039 157

ORION 028 056 084 112 135

021 023 060 061 062 172

PANASONIC 173 174

PENTAX 149 150 189

PENTEX RESEARCH 074

PHILCO 172 173 174

011 012 013 016 017 018

PHILIPS 058 059 173 174 180

PILOT 032

PIONEER 014 086 149 163

PORTLAND 160 161 164 189

PROTEC 145

QUARTER 035

QUARTZ 035

QUASAR 172 173 174

021 024 032 035 041 138

RADIO SHACK 139 142 147 153 154 171

172 173 174 177 185

RADIX 032

RANDEX 032

143 149 150 167 168 169

RCA 170 171 172 173 174 181

187

RICOH 002

RRAD!O 109

039 037 040 041 045 057

SAMSUNG 149 152 155 185 256 257

258

SANSU! 175 181

035 036 041 067 068 134

SANYO 147 259 260 261

SCOTT 141 156 176 191

032 035 142 147 149 150

SEARS 154 173 174

024 064 139 164 262 263

SHARP 264 265 266

SHINTOM 002 003 145 149 190

SHOGUN 041

SIGNATURE 139

SINGER 145 173 174

SINUDYNE 087 088

001 002 003 004 005 006

SONY 007 008 009 010 178 179

267 268 269 270

STS 173 174

SYLVANIA 138 139 176

SYMPHONIC 139

TANDY 035 139

TASHIKO 032

TATU N G 175

TEAC 138 139 175 181

TECHNICS 021 173

TEKNIKA 032 138 174

019 050 066 072 073 076

THOMSON 123 124 125 126

THORN 104 122

TMK 041 146 158

037 050 065 081 154 271

TOSHIBA 272 273 274

TOTEVSION 032 041

UNITECH 041

VECTOR RESEARCH 014 037 074 189

VICTOR 014

VIDEO CONCEPTS 037 074 177 189

VlDEOSONIC 014 041

024 032 037 041 138 139

WARDS 145 147 149 150 174 177

WHITE WEST 139

XR-1000 138 145 173 174

YAMAHA 014 035 074 175

ZENITH 002 003 014 039 159 188

ii!i

Please check the following if you are having trouble with your TV.

SYMPTOM POSSIBLE CAUSE POSSIBLE SOLUTION

No power The AC power cord is not connected. Connect the AC power cord

o to the AC outlet

TV station experiencing problems. Try another channel.

Picture control is not adjusted. Check picture control adjustments.

Poor or no picture. Possible local interference. Check for source of reception disturbance

Antenna/Cable connector is not connected. Check Cable connection or VHF!UHF ant

TV station experiencing problems. Try another channel.

Picture wobbles Cable TV channel is scrambled. A Cable box needs to be used (if desired)

or drifts.

o Possible local interference. Check for source of reception disturbance

Cable connected or not connected. Check all Cable connections.

oNo Cable reception. TVtCable set to TV. Set TV/Cable to Cable

Cable TV service interrupted. Contact your Cable TV company.

No reception above TV/Cable set to TV. Set TV/Cable to Cable.

o CH13.

:> TV station experiencing problems. Try another channel.

MUTE button is pressed. Press MUTE button again.

Poor or no sound. Possible local interference. Check for source of reception disturbance.

Antenna/Cable connector is not connected. Check Cable connection or VHF/UHF ant

Volume is set to minimum. Increase volume.

Sleep Timer is set. Set Sleep Timer to "Off".

TV Shuts off. Off Timer is set. Clear Off Timer.

TV Signal is weak. Check Cable or VHF!UHF antenna.

Closed Captioning TV station experiencing problems or

not working, program tuned is not closed captioned. Try another channel.

Closed Captioning not turned on. Press the CCD button.

The remote control is not aimed at the Aim the remote control at the Remote

sensor, sensor.

o Distance is too far or too much light in the Operate within 23 feet or reduce the

light in the room.

¢ Remote control room.

does not operate. There is obstacle in the of the beam, Clear the of the beam.

an path path

The batteries are weak. Replace the batteries.

The batteries are not inserted correctly. Insert correctly.

BLOCK is set to "Off". Set BLOCK to "On".

Parental Control not Parental Control does not work with

Working properly. News or sports event being broadcast. News or sporting events.

:> Ratings not set. Set ratings as desired.

ii ilii

iiii

Most types of television interference can be remedied by adjusting the height and position of the VHF/UHF antenna.

Outdoor antennas are recommended for best results if not using cable or a satellite. The most common types of

television interference are shown below. If one of these symptoms appear when the TV is connected to a Cable TV

system, the disturbance may be caused by the local cable company broadcast.

mGNITION:

BHackspots or horizontaH streaks may appear, picture may flutter or drifL

Usually caused by interference from automobiHe ignition systems, neon

Hamps,eHectdcdrills and other eHectdcappHiances.

GHOSTS:

Ghosts are caused by the television signal following two paths. One is the

direct path and the other is reflected from tall buildings, hills or other

objects. Changing the direction or position of the antenna may improve the

reception.

SNOW:

If your receiver is located in the fringe area of a television station where the

signal is weak, your picture may be marred by the appearance of small dots.

When the signal is extremely weak, it maybe necessary to install an

external antenna to improve the picture.

RADIO FREQUENCY INTERFERENCE:

This interference produces moving ripples or diagonal streaks, and in some

cases, causes loss of contrast in the picture.

PICTURE SIZE VARIATION:

A slight picture size variation is normal when you adjust the CONTRAST or

BRIGHTNESS setting.

CARE AND MAINTENANCE

To prevent fire or shock hazard, disconnect your unit from the AC power source when cleaning. The exterior of the

receiver may be cleaned with a dust cloth. Use caution when cleaning and wiping

the plastic parts. Mild soap and a soft, damp cloth may be used.

HT3061A HT3461A

Power Supply: AC 120V, 60Hz

Power Consumption: 200W 200W

Dimensions: (inch) 38.1(W) X22.2(H) X22.4(D) 41.7(W) X26.0(H) X24.4(D)

Weight(kg/_b): 85 kg1187 Ib

CRT: 34" FLAT SCREEN

Audio Output: 7W X 2

Receiving channek

VHF

UHF

Cable

Total

66 kg/146 Ib

30" FLAT SCREEN

7WX2

2-13

14-69

2-69, (A-6)-(A-1), A-W, (W+I)-(W+28)

181 channels

Television: NTSC-M

Co,or System: AV: NTSC3.58/4.43, PAL 4.43, SECAM, PAL-M

Antenna Impedance: VHFiUHF 75 ohm

Accessories: Remote control Xl

(io__') Design and specifications are subject to change without notice.

ModelNo.:

SerialNo,:

Name:

Address:

City:

Telephone:

DealerName:

Warrant_istration

To establish your warranty complete the information below and mail this post card,

Date Purchased: Purchase Price:

State /Provo:

bK_V

Email:

City:.

Zip /Postal Code:

PRINTED mN

RECYCLED PAPER

604oT3467-00

PRIMA TECHNOLOGY Direct View Digital 27 To 40 TV Manual L0522824

Navigation menu

Versions of this User Manual:

Views

Navigation