PRIMOS HUNTING CALLS 3754 e-PREDATOR User Manual

Download:
Mirror Download [FCC.gov]
Document ID	719160
Application ID	XeMsoT9NueGbJY9uBZk8oQ==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	44.3kB (553801 bits)
Date Submitted	2006-10-24 00:00:00
Date Available	2006-10-24 00:00:00
Creation Date	2006-10-19 13:49:30
Producing Software	Adobe Acrobat 6.0 Image Conversion Plug-in
Document Lastmod	2006-10-19 13:53:05
Document Title	Users Manual
Document Creator	Adobe Acrobat 6.0

E-PREDATOR INSTRUCTION
#_ Operation instruction:
1 .
Put 1pc “23A” or “L1028” 12V battery into the transmitter according to the correct my,
and then lock the battery cover.
Put 3pcs “AA” 1.5 V batteries into the receiver in correct way, and lock the battery
cover. Then put the power button. at the side of battery cover, to “ON" position.
Push “COYOTE” key on the transmitter, the LED on the transmitter is lighting, the
receiver will play correspondingly “Coyote Howl“ sound.
Push “FAWN" key, the LED on the transmitter is lighting, the receiver will play
correspondingly “Fawn" sound.
Push “RABBIT" key, the LED on the transmitter is lighting, the receiver will play
correspondingly “rabbit” sound.
Push “RODENT” key, the LED on the transmitter is lighting, the rece'wer will play
correspondingly “Rodent Squeak“ sound.
Push the “+” key, the LED on the transmitter is lighting, the receiver will play the
maximum sound.
Push the “-" key, the LED on the transmitter is lighting, the receiver will play the
minimum sound.
:. Operation hints:
1 .
5.
When you push key on the transmitter, the time shouldn't less than 1sec. Or the
receiver may not be able to receive the signal from transmitter because of the short
time, and the trigger is non-effective.
When operating the transmitter, please make sure the transmitter point to the
receiver’s position and the transmitter should be slanted up or down, and the effective
distance will be farther.
The receiver should right face to or opposite to the transmitter's position, or the
effective distance will be shorter.
When using, please put the transmitter in high position, the effective distance will be
farther.
Please make sure to use at the straight position.
5. Attention:
1 .
When you find the operating distance shortened or the lightness of the LED on the
transmitter, or the voice is becoming lower obviously, please change new battery with
the same type.
When you don’t use it, please put off the power switch of the receiver.
When you don’t use it for a long time. please take out the batteries both of the
transmitter and receiver.
When the last voice is still in playing after pushing the keys on the transmitter, you
push another key. the receiver will can‘t recognize the signal. and it will wait for the
last voice finished, then the receiver can recognize the new signal.
. Warning:
Clean only with dry cloth.
Do not attempt to open the equipment. Non-expert handling of the device may
damage the system.
Do not chang or modification. It is not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
s-PR EDATOR
Model No 3754
FCC DIN/3754
Prlmn! Hunting Cali!
MADE IN CHINA
i. Operating parameters:
1. Voltage: Transmitter 12V (“23A" or “L1028” 12V battery 1pc)
Receiver 4.5V (“AA" or “AMS” or “LRG” 1.5V battery 3pcs)
2. Current:
i. Transmitter: bypass current 5 1pA
Operating currents 10mA
ii. Receiver: Power off current = OuA
bypass current 5 2mA
playing currents 300mA
3. Operating frequency: 315 MHz
4. The effective remote control distance without disturbing is not less than 50m when the
distance between the transmitter and ground is more than 1.5m.
User Information
The users manual or Instruction manual for an intentional or
unintentional radiator shall caution the user that changes or
modifications not ex ressly approved by the party responsible
for compliance coul void the user‘s authority to operate the
equipment,
For a Class 8 digital device or peripheral. the instructions
furnished the user shall include the following or similar
statemlent, placed in a prominent location In the text of the
manua ,
The Federal Communications Commission Radio Frequency
Interference Statement includes the following paragraph.
This equipment has been tested and found to com Iy with the
limits for a Class B Digital Device. pursuantto Pa 15 for the
FCC Rules. These limits are designed to provide reasonable
rotection against harmful interference in a residential
nstallation.
This equipment generates. uses and can radiate frequency
energy and. if not installed and used in accordance with the
instruction may cause interference to radio communication.
However. there is no guarantee that interference will not occur
in a particular installation.
If this equipment does cause harmful interference to radio or
television reception. which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
-~Reorient or relocate the receiving antenna.
«Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit from that to
which the receiver IS connected.
"Cionsult the dealer or an experienced radio/TV technician for
he p.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 3
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:25aa0b44-4c2b-4cbd-8605-164159382c2b
Modify Date                     : 2006:10:19 13:53:05+08:00
Create Date                     : 2006:10:19 13:49:30+08:00
Metadata Date                   : 2006:10:19 13:53:05+08:00
Document ID                     : uuid:19a0eb95-6ca5-47d1-be01-234ddf3faf63
Format                          : application/pdf
Creator                         : Adobe Acrobat 6.0
Producer                        : Adobe Acrobat 6.0 Image Conversion Plug-in

EXIF Metadata provided by EXIF.tools