PROEXPRESS DISTRIBUTOR D101V2 Tablet PC User Manual Users manual

PROEXPRESS DISTRIBUTOR LLC Tablet PC Users manual

Users manual

User ManualEnglishTablet PCModel number:  V10
FCC RequirementChanges or modifications not expressly approved by the party responsible for compliance could voidthe user’s authority to operate the equipment.Note: This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses, and can radiate radiofrequency energy, and if not installed and used in accordance with the instructions, may cause harmfulinterference to radio communications. However, there is no guarantee that interference will not occurin a particular installation. If this equipment does cause harmful interference to radio or televisionreception, which can be determined by turning the equipment off and on, the user is encouraged to tryto correct the interference by one or more of the following measures:– Reorient or relocate the receiving antenna.– Increase the separation between the equipment and receiver.– Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.– Consult the dealer or an experienced radio/TV technician for help.IC CautionRSS-Gen Issue 4 December 2014"&"CNR-Gen 4e Décembre 2014:- English:This device complies with Industry Canada licence-exempt RSS standard(s).Operation is subject to the following two conditions:(1) This device may not cause interference, and(2) This device must accept any interference, including interference that may cause undesired operationof the device.- French:Le présentappareilestconforme aux CNR d'Industrie Canada applicables aux appareils radio exempts delicence. L'exploitationestautorisée aux deux conditions suivantes:(1) l'appareil ne doit pas produire de brouillage, et(2) l'utilisateur de l'appareildoit accepter tout brouillageradioélectriquesubi, mêmesi le brouillageestsusceptible d'encompromettre le fonctionnement.FCC ID :S5V-D101V2 IC ID: 22901-D101V2
About This User GuideImportantDisclaimer of Warranties • Some of the contents of this guide may appear differently on your device. Your actual device may differ from the illustration, dependingon the software and your service provider. All information in this document is subject to change without prior notice.• Your device's applications and their functions may vary by country, region, or hardware specifications. TabletExpress cannot be heldliable for performance or incompatibility issues resulting from edited registry settings being edited or operating system software beingmodified. Any attempt to customize your operating system may cause the device or its applications to not work as they should.• We do not suggest you reinstalling the system. You may contact TabletExpress support if reinstallation is necessary.• You may not disassemble the device in any circumstance.• Please keep your device away from fire, water or any extreme weather condition.• Please avoid any heavy object or hard press on front face of your device.TabletExpress  shall  not  be  liable  for  any  damages  of  any  kind  resulting from the purchase or use the product or arising from the breach of the express warranty, including incidental, special or consequential damages, or  loss  of  anticipated  profits  or  benefits.  TabletExpress  is  not  liable  for performance issues or incompatibilities caused by your editing or registry settings, or your modification of operating system software. Using custom operating  system  software  may  cause  your  device  and  applications  to work improperly.English1
English2I. Getting started1.1 Turn On/OffTurn OnTo start your tablet, press and hold the power key for 5-10secs,then releasethe power button. Turn off To power off your tablet, press and hold the power button until the option menuappears. Tap‘Power Off’ to turn off your device.
English3II. Home Screen1.2 Sleep ModeTo save battery, you may put your device in sleep mode by shortly pressing the power key, then screen will go to dark. Press it again you can wake up the screen. If there are any programs running when you lock your screen, they may be still running in sleep mode. It is recommended that you exit all programs before entering sleep mode to avoid unnecessary charges.①Back: Press to check previous operating display②Home Screen: Press to go to home screen③Background: Press to check applications runningon background. Existing idle Apps may provide a better performance④Application Panel: Press to check all available Applications2.1 WallpaperTap and hold your finger in any blank space of the home screen, you will see a pop-up menu; you can choose wallpaper from Gallery or your downloaded files or those listed as options;set the one you like to be wall paper.2.2 WidgetsTap and hold your finger in any blank space of home screen, you will see a pop-up menu with widget.2.3 Application ShortcutTap the icon of application you want to move, and drag to where you want to place on home screen.Tap the icon and move it to area showing a cross to delete them.1.Tap one icon and move on to top of another icon, you can create a new folder on home screen. Open the folder;click ‘Unnamed Folder’ to rename the folder.2.Swipe down vertically from top part of a display to enter quick notification menu.Tip:
English43.1 Wi-Fi ConnectionTap Settings – Wireless & Networks – Wi-Fi – tap to turn it to ‘ON ‘. After a moment, your Wi-Fi network nearby will be listed. If you need to rescan for available networks, tap the menu   on right top corner, and tap ‘Refresh’. Your device lists the networks it finds within range. Tap the network you have access to, enter password, and tap  ‘Connect’. When your  tablet is connected  to the network,  the wireless indicator      appears in the status bar. Waves  indicate connection strength.Tip:You may turn off Wi-Fi if you’re not using it to save the battery.To turn off Wi-Fi, tap it again to ‘OFF’ .You may also enter Wi-Fi setting by swiping down from top middle part,and enter by taping ‘Wi-Fi’.3.2 Bluetooth Turn on BluetoothYou must pair your device with another device before you can transfer files between them. Under ‘Settings’, choose ‘Bluetooth’. Tap Bluetooth to ‘ON’, the Bluetooth indicator   then appears in the status bar. It will start searching available devices nearby. If you need to rescan, tap the menu  on top right corner, and tap ‘Refresh’. Scan Device After scanning, there will be a list of all available Bluetooth devices in range. If the device you want to pair with isn’t in the list, ensure that the other device is turned on and set to be discoverable.Pair with Bluetooth Device Tap the name of an available Bluetooth device you want to pair with. On the target device you will get a  ‘Bluetooth pairing request’ dialog. Tap ‘Pair’, it will then show you paired devices.
English5Change Your Bluetooth Name1. Verify your Bluetooth is active.2. Tap the menu   on top right corner, and tap‘Rename this device’.3. Enter a new name.4. Tap ‘Rename’ to complete the rename process.Note: You can see the received files through “Show received files” by tapping the right corner icon. Turn Bluetooth off to save battery.IV. Google Store4.1 Install AppsFind and open play store with this icon Log into your account if you have one available; if you don’t have an account, you may create a new Google account first.Search and download Apps you need.4.2 Manage AppsCaches of Apps1.You may need to clear caches of Apps when it’s excess. Go to “Setting – Device – Apps”; find the App and go to App info; you canprocess by tapping “Clean caches”.    2.By installing a third party cache cleaner, you can also clean caches.Shortcut/Icons of AppsBy tapping icon of the App you want to move in application display, you can move the shortcut to home screen.Delete/Uninstall Apps 1.By tapping and moving the icon of an App to the cross menu, you may remove the shortcut from home screen.2.By tapping an App in application display, you will get a prompt of ‘Uninstall’ with icon of    and ‘App info’. Move the App to the trashbin to delete/uninstall the App. You may also go to Setting – Device – Apps – Uninstall to delete/uninstall the App.
English6Note:1. Users are responsible for all charges with concerned Apps if there is any.2. Manufacture/sellers are not reliable for Apps that are incompatible with the device.3. In some cases, there may be no icon in the App Panel after an App is installed. Possible reasons may be that this App is notcompatible with your OS or the downloaded file is a broken one so you may need to download a full version.4. If you install and use an OS other than the one provided by the manufacturer, it may cause your device to malfunction, therefore,your device will no longer be covered by the warranty in this condition.5.1 Internet NavigatingBefore using your browser, make sure Wi-Fi or internet is connected. Setting BrowserYou can use the browser preinstalled, or download others you prefer. Tap the icon   on top right corner of the browser page to open the submenu for more detailed setting.NavigatingTap the browser icon    to open your browser. You can access a website quickly by entering the URL on screen keypad. Websites are optimized for viewing on your actual devices.V. Internet NavigatingBookmarks1.Tap    on any webpage to add a bookmark. You can then tap ”OK” to save or rename the website.2.Tap    to view bookmarked sites, pages you saved and your browsing history.3.To delete a bookmark, go to bookmarks page, tap and hold the bookmark you want to delete. Tap “Delete bookmark”. At the Deleteconfirmation window, tap OK.CookiesCookie placed on your device by a website during navigation contains some site specific information. It can also contain some personal information (such as a username and password) which can pose a security risk if not properly managed. You can clear these cookies from your device at any time.  Go to Home webpage, press  , Settings – Privacy & security – Clear all cookie data.
English7Note:1. Users are responsible for all charges with concerned Apps if there is any.2. Manufacture/sellers are not reliable for Apps that are incompatible with the device.3. In some cases, there may be no icon in the App Panel after an App is installed. Possible reasons may be that this App is notcompatible with your OS or the downloaded file is a broken one so you may need to download a full version.4. If you install and use an OS other than the one provided by the manufacturer, it may cause your device to malfunction, therefore,your device will no longer be covered by the warranty in this condition.5.1 Internet NavigatingBefore using your browser, make sure Wi-Fi or internet is connected. Setting BrowserYou can use the browser preinstalled, or download others you prefer. Tap the icon   on top right corner of the browser page to open the submenu for more detailed setting.NavigatingTap the browser icon    to open your browser. You can access a website quickly by entering the URL on screen keypad. Websites are optimized for viewing on your actual devices.V. Internet NavigatingBookmarks1.Tap    on any webpage to add a bookmark. You can then tap ”OK” to save or rename the website.2.Tap    to view bookmarked sites, pages you saved and your browsing history.3.To delete a bookmark, go to bookmarks page, tap and hold the bookmark you want to delete. Tap “Delete bookmark”. At the Deleteconfirmation window, tap OK.CookiesCookie placed on your device by a website during navigation contains some site specific information. It can also contain some personal information (such as a username and password) which can pose a security risk if not properly managed. You can clear these cookies from your device at any time.  Go to Home webpage, press  , Settings – Privacy & security – Clear all cookie data.
English8VI. Multi-media Functions6.1 Checking Data and FilesFiles on Device1.You may check your downloads, photos or music in corresponding files through “FileManager”2.Tap      in USB storage page, you can create a new folder.Connecting to PC1.Slide down from top screen and tap ‘Connected as a media device’ from notificationmenu after connecting it to PC. Select ‘Media device MTP’. You will see the device in yourPC as Portable devices. Click it to get into USB storage. You can see files in your devicestorage through your PC.2.You can add/move files between your device and PC, create or delete folders in yourdevice storage.External StorageYour device supports storage extending by adding Micro SD/TF card. 1.With a compatible working external memory card, you can check in Setting –Storage.You can also check through “File Manager”. USB storage representsyour device’s storage; SD card represents your external memory card.2.You may transfer files like photos, music,  between your memory card and your devicestorage. Select and tap an object to highlight it,you will get option to share/copy/delete/cut the chosen object.
English96.2 Entertainment CameraBy wiping to left on unlock display, you can get to camera. You can also enter from shortcut on main menu.①Normal Mode②Face Beauty Mode③Front/RearCamera Switch④Photo⑤Video⑥Setting①③④⑤⑥②GalleryYou can view, or edit your digital pictures in Gallery. MusicYou can buy and download music or load downloaded music to your device. Video You can play videos saved in your device or  external  memory  card.  To  play,  tap Video  icon  to  launch  the  video  player. Tap the video you would like to play. Tap the  screen  to  show  the  video  tool  bar. You  can  play  back,  fast  forward,  pause your video here.
English10VII. Battery1. A rechargeable Li-ion battery is used to power your device. You must fully charge the battery before using your phone for the first time.2. If the touch screen does not function while the device is in the process of charging, this may be due to an unstable power supply. Inthis case, please disconnect the charger from the power outlet or use your device when charging is completed.3. Please charge the device when the battery is weak with warning icon    before it turns off automatically.Tips to extend the life of your battery• Turn off radio communications that you aren't using, such as Wi-Fi, Bluetooth,or GPS.• Lower screen brightness and set a shorter screen timeout.• Turn off automatic syncing for Gmail™, Calendar, Contacts, and otherapplicationsVIII. System Setting8.1 Screen LockSet a screen lock to secure your tablet. Tap – Settings - Security - Screen security - Select screen lock, and select a mode from None, Swipe, Voice Unlock,  Pattern,  PIN  and  Password.  You  can  create  a  Backup  PIN  as  a safety measure in case you forget your code. Unlock Screen - Swipe TypeTap the lock icon and swipe upward to unlock your tablet and enter home screen.Tap the lock and swipe left, you will go to camera directly.Caution: Note down the lock you set in case you forget it.
English118.2 Device ResetYou may reset your tablet when necessary. This will clear all info in your tablet and get your device back to factory mode.WARNING!If you perform a Hard Reset, all user applications, user data will be deleted. Please remember to backup any important data before performing a Hard Reset.8.3 Multiple UsersWith this function, you can add other users on your device with restricted profiles.This function may not be applied to all Dragon Touch devices. Function or configuration may vary in actual devices.View User Account You can check your user accounts in home screen swiping down notification or check in Setting. Tap the icon and enter the page to view all your user accounts. The first one in the line is the main account you set on your device.Add New User AccountGo to Setting – Users, you can add useror profile. You can also go  to  add  through swiping down notification  when  ‘ Owner ‘is the current  account in control.
English12Switch User AccountGo to user accounts display through Setting. You will see all user accounts listed. Tap any new user account you created, you can  switch to corresponding user  account and check info saved in that user account.Rename User AccountYou can rename your current user account when it’sin control. Tap the user name for 2 seconds and release; you will get the window to input a new name. Tap ’OK’ to save the change.Troubleshooting1. Device doesn’t power on• Reboot your device after charging it for 30 minutes.• Shortly press your power button to check if it lights upin case your device is in sleep mode.• Press the power button for 20 seconds.• Start a hard reset by pressing the reset button with apin if there is reset button on your actual device.
English132. Device doesn’t take charge• Keep your device into power for 30 minutes if it was completely drained.     • Check and make sure the charger is properly insertedinto charging port.     • Try another outlet or compatible charger3. Error message during operation• Uninstall the application with error message and download to install again. You can also update certain application with error.• Delete and clear the system to factory mode with a system reset.4. Device can’t be detected by PC• Make sure your device is in ‘on’ status     • Try with another USB cable     • Connect your device to a different port on your PC5. Device can’t be connected with Wi-Fi• Make sure your turn WI-FI to ‘ ON’ status.     • Unplug Wi-Fi router, wait for 2 minutes and plug to connect again.• Make sure you input correct password by selecting ‘ show password’ when you input it.              • Check and make sure there is nofiltering setting or device connection limit in your router setting.     • Forget original Wi-Fi connection, reset Wi-Fi router, and connect again.6. Storage not enough• Delete applications you don’t use often to spare some space      • Clean caches in your devices regularly Setting – Apps - click theapp and clear cache or data.    • Install a third party system cleaner.    • Factory reset your tablet to clear all data.• Get an extended memory card to expand storage.
User ManualFrançais/French
A Propos de Ce Guide Utilisateur ImportantExclusion de Garanties • Certain contenu de ce guide pourrait apparaître différemment sur votre dispositif. Votre dispositif actuel pourrait différer de l’illustration, dépendant de logiciel et votre fournisseur. Toute information dans ce document peut être modifiée sans avis préalable. •  Les  applications  de  votre  dispositif  et  leurs  fonctions  pourraient  varier  selon  le  pays,  la  région,  ou  les  spécifications  de  matériel. TabletExpress ne peut être responsable des problèmes de performance ou d’incompatibilité venant d’une modification des réglages du dispositif ou la modification du logiciel système. Tout essai de personnalisation du système installé pourrait causer le non fonctionnement du dispositif ou de ses applications .•  Nous  ne  vous  conseillons  pas  de  réinstaller  le  système.  Merci  de  contacter  le  support  de  TabletExpress  si  vous  pensez  que  la réinstallation est nécessaire. • Vous ne devez pas démonter le dispositi, peu importe les circonstances. • Veuillez garder votre dispositif loin du feu, de l’eau ou toute autre condition extrême. • Veuillez éviter tout objet lourd ou appui dur sur la surface avant de votre dispositif.TabletExpress ne pourra être tenue responsable de quelque dommage que ce soit résultant de l’achat ou de l’utilisation du produit ou du non-respect de la garantie expresse, y compris les dommages indirects, spéciaux ou accessoires, ou encore la  perte  de  profits  ou  d’avantages  prévus.  TabletExpress  ne  pourra  être  tenue responsable  de  problèmes  de  performance  ou  d’incompatibilité  causée  par  les modifications  de  réglages  apporté,  ou  de  la  modification  de  logiciel  système. L’utilisation d’un autre logiciel système pourrait empécher le bon fonctionnement du dispositif ou de ses applications. Français1
2I. Guide de Démarrage 1.1 Allumer/Eteindre Pour démarrer votre tablette, appuyez et maintenez la touche alimentation pendant 5-10secs, puis relâchez le bouton d’alimentation. Pour  éteindre  votre  tablette,  appuyez  et  maintenez  le  bouton  alimentation  jusqu’à  ce  que  le  menu  option  apparaisse. Appuyez  sur ‘Eteindre’ pour éteindre votre dispositif.II. Ecran d’Accueil1.2 Mode VeillePour économiser la batterie, vous pouvez mettre votre dispositif en mode veille en faisant un appui court sur le bouton d’alimentation. Appuyez de  nouveau  sur le bouton  et l’écran se  ralume. S’il y  a des programmes  en cours lorsque vous  verrouillez votre écran,  ils peuvent toujours fonctionner en mode veille. Il est recommandé de quitter tous les programmes avant d’entrer en mode veille pour éviter que la tablette se décharge trop rapidement. ① Back: Press to check previous operating display ② Home Screen: Press to go to home screen③ Background: Press to check applications running on  background.  Existing  idle Apps  may  provide  a better performance④ Application  Panel:  Press  to  check  all  available ApplicationsFrançais
1. Appuyez et restez appuyé sur une icône et déplacez la sur une autre icône, vous pouvez alors créer un nouveau dossier sur l’écran d’accueil. Ouvrez  le  dossier  :  cliquez  sur  ‘dossier Anonyme’  pour  renommer  le dossier2. Glissez vers le bas verticalement à partir du haut de l’écran pour entrer dans le menu de notification rapide .2.3 Raccourci Application Appuyez  et  restez  appuyé  sur  l’icône  de  l’application  que  vous souhaitez  mettre  sur  l’écran  d’accueil. Appuyez  et  restez  appuyé  sur l’icône  et  déplacez-la  dans  la  zone  montrant  une  croix  pour  la supprimer.32.1 Papier peintFrançaisTapez  et  maintenez  votre  doigt  sur  n’importe  quel espace  vide  de  l’écran  d’accueil,  vous  allez  voir apparaitre un menu contextuel ; vous pouvez choisir le papier peint de la Galerie, vos fichiers téléchargés ou ceux listés comme options ; réglez celui que vous souhaitez pour le fond d’écran.2.2 WidgetsTapez et maintenez votre doigt sur n’importe quel espace vide de l’écran d’accueil, vous allez voir apparaitre un menu contextuel avec Widgets.
3.2 Bluetooth Mettre en marche Bluetooth Vous devez jumeler votre dispositif avec un autre dispositif avant  de  pouvoir  transferer  des  fichiers  entre  eux.  Dans ‘Réglages’, choisissez ‘Bluetooth’. Mettez Bluetooth à ‘ON’, l’indicateur  Bluetooth      apparaît  dans  la  barre  d’état.  Il  va commencer  à  rechercher  des  dispositifs  disponibles  à proximité.  Si  vous  avez  besoin  de  rescanner,  tapez  sur  le menu en haut à droit, et appuyez sur  ‘Rafraîchir’.Français4III. Connexion de Réseau Vous pourriez éteindre Wi-Fi si vous ne l’utilisez pas pour économiser la batterie. Pour éteindre Wi-Fi, allez dans      les options et mettez le Wifi sur ‘OFF’. Vous pouvez également couper le Wi-Fi en passant par le menu de notification 3.1 Connexion Wi-FiAppuyez sur Réglages-Sans Fil&Réseaux-Wi-Fi appuyez pour le mettre à ‘ON’. Après un moment, votre réseau Wi-Fi sera listé. Si vous avez besoin de rescanner les réseaux disponibles, tapez sur  en haut à droite, et appuyez sur ‘Rafraîchir’. Votre dispositif liste les réseaux qu’il trouve à sa portée. Appuyez sur le réseau que vous souhaitez acceder, entrez le mot de passe, et appuyez sur ‘Connecter’. Lorsque votre tablette est connectée au réseau, l’indicateur sans fil   est dans la barre d’état. Les vagues signifient la stabilité de  la connexion.
Changer le Nom de Votre Bluetooth 1. Vérifiez que votre Bluetooth est actif. 2. Appuyez sur le menu  en haut à droite, et selectionner ‘Renommer ce dispositif’3. Entrez un nouveau nom4. appuyez ‘Renommer’ pour compléter le processus de renommage.Remarque : Vous pouvez voir les fichiers reçus par ‘Afficher les fichiers reçus’ en appuyant sur l’icône à droite. Coupez le Bluetooth pour économiser la batterie. Français5Scanner Dispositif Après le scan, il y aura une liste de tous les dispositifs Bluetooth disponibles à portée. Si le dispositif que vous voulez jumeler n’est pas dans la liste, assurez-vous que l’autre dispositif est allumé et réglé à trouvable. Jumelage avec Dispositif Bluetooth Appuyez  sur  le  nom  du  dispositif  Bluetooth  disponible  que  vous voulez  jumeler.  Sur  le  dispositif  ciblé  que  vous  voulez  vous obtiendrez  ‘Demande  de  jumelage  Bluetooth’.  appuyez  sur ‘Jumelage’, puis il va vous afficher les dispositifs jumelés.
Français6IV. Boutique de Google4.1 Installer Apps (Applications)Trouvez et ouvrez play store avec cet icône  Entrez dans votre compte si vous en avez un ; si vous n’en avez pas, vous pouvez en créer un. Recherchez et téléchargez les Apps que vous avez besoin.4.2 Gérer les Apps Raccourci/Icônes d’AppsEn appuyant sur l’icône de l’App que vous voulez déplacer dans l’écran d’application, vous pouvez déplacer le raccourci sur l’écran d’accueil. Supprimer/Désinstaller Apps 1. En appuyant et déplaçant l’icône d’une App vers le haut de l’écran, vous pouvez enlever le raccourci de l’écran d’accueil. 2. En faisant un appui long sur une App dans l’écran d’application, vous allez obtenir une indication ‘Désinstaller’ avec l’icône et ‘Info App’. Déplacez l’App dans la corbeille pour supprimer/désinstaller l’App. Vous pouvez aller également à Réglage-Dispositif-Apps-Désinstaller à supprimer/désinstaller l’App. Caches of Apps1.  Vous  pourriez  avoir  besoin  d’effacer  les  caches  d’Apps  lorsqu’elle  fonctionne  mal  ou  est  trop  importante.  Allez  à ‘Réglage-Dispositif-Apps’ ; trouvez l’App et allez à l’info d’App ; vous pouvez procéder en selectionnant sur ‘Effacer caches’2. En installant un nettoyeur de cache, vous pouvez nettoyer les caches.
Remarque : 1. Les utilisateurs sont responsables pour tout frais inhérent aux applications concernées s’il y en a. 2. Le fabricant/vendeur n’est pas responsable des applications qui ne sont pas compatibles avec le dispositif3. Dans certains cas, il est possible qu’il n’y ai pas d’icône dans le Panneau d’App après l’installation d’une App. Les raisons peuvent être que  cette App  n’est  pas  compatible  avec  votre  OS  ou  le  fichier  téléchargé  n’est  pas  conforme  ainsi  vous  pourriez  avoir  besoin  de télécharger une version complète4. Si vous installez et utilisez un OS autre que celui offert par le fabricant, il pourrait causer le mauvais fonctionnement de votre dispositif, ainsi votre dispositif sera pas couvert par la garantie.Français7V. Navigation Internet5.1 Navigation InternetAvant d’utiliser votre navigateur, assurez-vous que Wi-FI ou internet soit connectéRéglage du Navigateur Vous pouvez utiliser le navigateur préinstallé, ou téléchargez ceux que vous préférez. Tapez sur l’icône en haut à droite de la page de navigateur pour ouvrir le sous menu pour plus de réglages.NavigationTapez sur l’icône  pour ouvrir votre navigateur. Vous pouvez accéder rapidement à un site web en entrant l’URL sur le clavier de l’écran, les Sites web sont optimisés pour la navigation sur tablette.
Français8Marquage-page1. Tapez sur sur toute webpage pour ajouter un marque-page. Vous pouvez appuyer sur ‘OK’ pour sauvegarder ou renommer le site web. 2. Appuyez sur pour voir les sites en favoris, les pages que vous avez sauvegardées et l’historique de votre navigation. 3. Pour supprimer un favoris, allez à la page Favoris, appuyez longuement sur le favori choisi et sélectionner l’option de suppression. A la fenêtre de confirmation Supprimer, tapez sur OK. Cookies Les Cookies mis sur votre dispositif par un site web en cours de navigation contiennent certaine information spécifique  de  site.  Elle  peut  également  contenir certaine  information  personnelle  (telle  que  un  nom d’utilisateur  et  le  mot  de  passe)  qui  peut  poser  un risque  de  sécurité  si  non  correctement  traité.  Vous pouvez effacer ces cookies de votre dispositif à tout moment. Allez  sur  la  page  d’accueil  du  navigateur, appuyez  sur    ,  Réglages-Privé&sécurité-Effacer toutes les données de cookie.VI. Fonctions Multi Média6.1 Vérification des Données et des Fichiers Fichiers dans le Dispositif1.  Vous  pouvez  vérifier  vos  téléchargements,  les photos, ou la musique dans les fichiers correspondant par ‘Gestionnaire de Fichier’ 2. Appuyez sur  dans la page de stockage USB, vous pouvez créer un nouveau dossier.
Français9Connexion à un PC1. Glissez vers le bas d’écran en haut et tapez ‘Connecté comme un dispositif de média’ du menu de notification après la connexion à PC. Sélectionnez ‘Dispositif Média MTP’. Vous allez voir le dispositif dans votre PC comme un dispositif portable. Sélectionnez-le pour aller dans le stockage USB. Vous pouvez voir les fichiers dans le stockage de votre dispositif par votre PC. 2. Vous pouvez ajouter/déplacer des fichiers entre votre dispositif et le PC, créer ou supprimer des dossiers dans le stockage de votre dispositif. Stockage Externe Votre dispositif est compatible avec l’extension de stockage en ajoutant la carte Micro SD/TF.1. Avec une carte de mémoire externe compatible, vous pouvez vérifier dans Réglage-Stockage. Vous  pouvez  vérifier  également  par  ‘Gestionnaire  Fichier’.  Le  stockage  USB  représente  le stockage de votre dispositif ; la carte SD représente la carte de mémoire externe.
Français102. Vous pouvez transférer les fichiers comme les photos, la musique, entre votre carte de mémoire et le stockage de votre dispositif. Sélectionnez en appuyant sur un objet pour le mettre en surbrillance, vous allez avoir l’option pour partager/copier/supprimer/couper l’objet choisi.  6.2 Loisirs
Français11① Mode normal   ② Mode Beauté de visage③ Interrupteur d’appareil photo Avant/arrière④ Photo ⑤ Vidéo ⑥ Réglage①③④⑤⑥②Appareil Photo En balayant à gauche sur l’écran de déverrouillage, vous pouvez aller  à  l’appareil  photo.  Vous  pouvez  également  passer  par raccourci sur le menu principal.  Musique:Vous pouvez acheter et télécharger de la musique ou transmettre la musique téléchargée à votre dispositif.  Vous pouvez voir ou éditer vos images numériques dans Galerie.
Français12Vidéo Vous pouvez lire les vidéos sauvegardées dans votre dispositif ou carte mémoire externe. Pour lire, appuyez sur l’icône Vidéo pour lancer le lecteur vidéo. Selectionnez la vidéo que vous voulez lire. Appuyez sur l’écran pour afficher la barre d’outil de vidéo. Vous pouvez lire, avancer rapidement, mettre en pause votre vidéo ici.VII. Batterie1. Une batterie rechargeable Li-ion est utilisée pour allumer votre dispositif. Vous devez charger complètement la batterie avant d’utiliser votre dispositif pour la première fois. 2. Si l’écran tactile ne fonctionne pas lorsque le dispositif est en cours de chargement, ceci pourrait être dû à l’alimentation instable. Dans ce cas, veuillez déconnecter le chargeur de la prise d’alimentation ou utilisez votre dispositif lorsque le chargement est terminé. 3. Veuillez charger le dispositif lorsque la batterie est faible avec l’icône d’avertissement  avant qu’il s’éteigne automatiquement.
Français13VIII. Réglage de Système8.1 Verrou d’Ecran Réglez  un  verrou  d’écran  pour  sécuriser  votre  tablette. Taper-Réglages-Sécurité-Sécurité  d’écran-Sélectionnez  le  verrou  d’écran  et sélectionnez un mode de Non Glisser Verrou de Voix, Schéma, PIN et Mot de passe. Vous pouvez créer un PIN de réserve comme une mesure de sécurité au cas où vous oubliez votre code. Déverrouiller Ecran-Type de GlissementAppuyez sur l’icône verrou et glissez vers le haut pour  déverrouiller  votre  tablette  et  entrez  sur  l’ écran d’accueil. Appuyez sur le verrou et glissez à gauche, vous allez directement à l’appareil photo. Conseils pour étendre la durée de vie de la batterie • Eteignez les options que vous n’utilisez pas, telles que Wi-Fi, Bluetooth, ou GPS.• Diminuez la luminosité d’écran et réglez une mise en veille plus courte.• Eteignez la synchronisation automatique pour Gmail, Calendrier, Contacts et autres applications• Eteignez l’appareil lorsque vous ne l’utilisez pas pour une longue période. Le mode veille utilise lui aussi la batterie Précaution : Ecrivez le code de verrouillage que vous réglez au cas où vous oubliez.
Français148.2 Réinitialisation de Dispositif Vous pouvez réinitialiser votre tablette si nécessaire. Ceci va effacer toute info dans votre tablette et mettre votre dispositif en mode d’usine. AVERTISSEMENT !Si vous faites une Réinitialisation complète, toutes les applications de l’utilisateur, les données utilisateur seront supprimées. Veuillez ne pas oublier de sauvegarder toutes données importes avant de faire une Réinitialisation complète. 8.3 Multiple UtilisateursAvec  cette  fonction,  vous  pouvez  ajouter d’autres utilisateurs sur votre dispositif avec des profils restreint. Cette  fonction  ne  pourrait  être  appliquée  à tous  les  dispositifs  Dragon  Touch.  Les fonctions  ou  configuration  pourrait  varier dans les dispositifs actuels.
Français15Voir le Compte d’Utilisateur Vous  pouvez  vérifier  vos  comptes  d’utilisateur  dans  l’écran  d’accueil  en glissant  vers  le  bas  la  notification ou  entrez  dans  Réglage. Selectionnez l’icône réglages et dans comptes utilisateur pour voir tous vos comptes. Le premier dans la ligne est le compte principal que vous réglez dans votre dispositif. Ajouter Nouveau Compte d’Utilisateur Aller à Réglage-Utilisateurs, vous pouvez ajouter l’utilisateur ou profil. Vous pouvez aller également à ajouter en glissant vers le bas la notification lorsque ‘Propriétaire’ est le compte actuel utilisé. Changer le Compte d’UtilisateurAller à l’écran comptes d’utilisateur par le Réglage. Vous allez voir tous les comptes d’utilisateur listés. Tapez n’importe quel compte de nouvel utilisateur que vous avez créé, vous pouvez changer au compte d’utilisateur correspondant et vérifier l’info sauvegardée dans le compte d’utilisateur.
Français16Renommer le Compte d’Utilisateur Vous pouvez renommer le compte de votre utilisateur actuel lorsqu’il utilisé. Appuyez sur le nom d’utilisateur pendant 2 secondes et relâchez ; vous allez avoir la fenêtre pour entrer un nouveau nom. Tapez sur ‘OK’ pour sauvegarder la modification. Dépannage1. Le dispositif ne s’allume pas• Redémarrez votre dispositif après une charge minimum de 30 minutes • Appuyez courtement sur le bouton de votre alimentation pour vérifier s’il s’allume en cas où votre dispositif est en mode veille • Appuyez sur le bouton d’alimentation pendant 20 secondes • Démarrez une réinitialisation complète en appuyant sur le bouton réinitialisation avec un épingle s’il y a un bouton réinitialisation sur votre dispositif actuel. 2. Le dispositif ne se charge pas • Gardez votre dispositif branché electriquement pendant 30 minutes s’il est complètement vide. • Vérifiez et assurez-vous que le chargeur est correctement inséré dans le port de charge. • Essayez une autre prise electrique ou un autre chargeur compatible.
Français173. Message d’erreur durant l’utilisation • Désinstallez l’application qui est en erreur et téléchargez/installer à nouveau.• Supprimez et effacez le système en mode d’usine avec une réinitialisation de système4. Le dispositif ne peut être connecté avec le Wi-Fi• Assurez-vous que vous mettez WI-FI en état ‘ON’• Essayez avec un autre câble USB• Connectez votre dispositif dans un port différent sur votre PC5. Le dispositif ne peut être connecté avec le Wi-Fi• Assurez-vous que vous mettez WI-FI en état ‘ON’• Débrancher le routeur Wi-Fi, attendez pour 2 minutes et branchez à connecter à nouveau. • S’assurer vous d’avoir mis le bon mot de passe en sélectionnant ‘afficher le mot de passe’ lorsque vous l’entrez.• Vérifiez et assurez-vous qu’il n’y a pas de réglage de filtrage ou la limite de connexion de dispositif dans votre réglage de routeur. • Oubliez la connexion Wi-Fi originale, réinitialisez le routeur Wi-Fi, et connectez à nouveau. 6. Stockage insuffisant• Supprimez les applications que vous n’utilisez pas souvent pour récupérer de l’espace disponible• Nettoyez régulièrement les caches dans vos dispositifs Réglage-Apps-cliquez sur app et effacez la cache ou les données. • Installez une application de nettoyage système.• Faite une restoration usine de votre tablette pour effacer toutes les données.• Obtenez une carte de mémoire étendue pour étendre le stockage.
Français18MEMO Um mögliche Hörschäden zu vermeiden hören Sie nicht für längere Zeit mit hoher Lautstärke.

Navigation menu