Pacific PMV108M Low Power Transmitter for Vehicle Tire Pressure User Manual manual
Pacific Industrial Company, LTD. Low Power Transmitter for Vehicle Tire Pressure manual
Pacific >
manual
PACIFIC INDUSTRIAL CO, LTD. December 9, 2005 T93 / FCB TUV America Inc 10040 Mesa Rim Road San Diego CA 92121 Re: Compliance Statement in Vehicle Manual The model PMV—108M is installed in vehicles as original equ'pment. We do not supply a manual with the unit but we do notify the vehicle manufacturer of the required statements that must be placed in thei' users manual. meeting the requirements of the Federal Communications Commission CFR 47. Part 15, Paragraph 15.19(a)(3) and Industry Canada RSS-210, Paragraph 5411: A representative copy of this notification letter is attached. Sincerely. Kazunori Yamaguchi TPMS DEPT. Pacific Industrial Cot. Ltdt Tel: +81-584-28-01 11 Fax: +81 -584-28—01 00 Email:kzyamagu@pacific-ind.cotjp PACIFIC INDUSTRIAL CO, LTD. December 9, 2005 HONDA MOTOR COHLTD. 4630 Shimotakakenezawa, Haga-machi, Haga-gun, Tochigi , 321-3393 Japan The model PMV-108M is installed in your vehicles as original equipment. We do not supply a manual with this unit but we request that the following required statements be placed in the vehicles manual to meet the requirements of the Federal Communications Commission CFR 47, Part 15, and Industry Canada RSS-2104 COMPLIANCE STATEMENT “This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and, 2) This device must accept any interference received including interference that may cause undesired operafion." MODIFICATION CAUTION STATEMENT: “CAUTION TO USER: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.” RF EXPOSURE CAUTION STATEMENT (for a mobile device that must maintain a separation distance of at least 20 cm): "RF Radiation Hazard Wam'ng: To ensure compliance with FCC RF Exposure requirements, this device must be installed in a location such that the antenna of the device will be greater than 20 cm (8 in.) from all persons." Sincerely Kazunori Yamaguchi TPMS D EPT. Pacific Industrial Co, Ltd. Tel: +81 -584-28-01 11 Fa>c 081-584—280100 Email:kzyamagu@pacific-ind.corjp ADDITIONAL INFORMATION TO THE APPLICANT: If your device IS a transmitter with a detachable antenna. you also need to notify the automobile manufacturer to include the following statements per IC RSS -210 Paragraph 5 5 and the second part of RSS- 210, Paragraph 511: ‘I'his device has been designed to operate with an antenna having a maximum gain of __dB. Antenna having a higher gain is strictly prohibited per regulations of Industry Canada The required antenna inpedance is _ ohms.‘ " To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (EIRP) is not more than that required for successful communication."
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Page Count : 3 Producer : DocuCentre Color f450 Creator : DocuCentre Color f450EXIF Metadata provided by EXIF.tools