Pakesen Electronics M517-BT Bluetooth headset User Manual

Shenzhen Pakesen Electronics Co.,Ltd. Bluetooth headset

User Manual

•Macbeth M517-BT Bluetooth Headset•Instruction manualSAFETY INSTRUCTIONS:- Keep out of reach of children.- Do not attempt to repair. Consult a professional if the headphones are not working properly.- Do not insert anything other than USB cables into the ports.- Do not use the device while charging it.- Keep the device away from fire, water and extreme temperatures.Bluetooth mode:1 Power on: Press and hold the multi-functional button for 3 seconds until the LED begins to flash blue.2 Power off: Press and hold the multi-functional button for 3 seconds until LED indicator begins to flash red/blue. It will then burn solid red before turning off, indicating that the BT has shut off.3 The LED indicator will flash from blue to red when not in use and entering standby mode. This will turn the device off to conserve power.Bluetooth pairing:1 Press and hold the multi-functional button for 6 seconds The LED indicator will flash blue and red, indicating that the device has entered pairing mode.2 Activate the Bluetooth function on your mobile device and select "Macbeth BTH09" from the list of devices.Answering calls1 After Bluetooth pairing has been successful, press the multi-functional button once to answer incoming calls.2 During a call, press the multi-functional button once to end the call.3 To redial the previously dialled number, press the multi-functional button twice.Charging the BT PhoneInsert the provided Micro-USB charging cable into the charging port and connect the opposite end to a Computer’s USB port or an AC wall adapter. • The LED indicator will illuminate red while charging and turn blue when fully charged.Volume up or previous track: • Press “+” once to increase the volume • Press and hold “+” to go to the next trackVolume down or next track: • Press “-“ once to decrease the volume • Press and hold “-“ to go to the previous trackMade in China
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help.

Navigation menu