Pakesen Electronics M811-BT Bluetooth earphone User Manual 15 M811 BT UserMan r1
Shenzhen Pakesen Electronics Co.,Ltd. Bluetooth earphone 15 M811 BT UserMan r1
15_M811-BT UserMan r1
IMPORTANTSAFETYINSTRUCTIONSForM811‐BTOn.The.Run.Bluetoothearphone
Bluetooth Pairing/Connection
Turn on earbuds by pressing the button.
Bluetooth pairing will activate automatically.
Enable Bluetooth function on your device and
find TL816 Bluetooth device from the list of
pairable devices. Click or tap connect/or tap on
the item name to pair the two devices. After a
successful connection, the earbuds will
announce that it has been paired. Now you can
listen to your music using the wireless earbuds.
Key Functions
On/Off: Press and hold the for 5
seconds to turn on/off.
Music Pause: Press the to pause
music. Press again to resume playback.
This can also be used to answer/end calls.
Volume Increase: Press the button to
increase volume. Press the to reduce
volume.
Next Song: Press and hold the button
to skip to the next song.
Previous Song: Press and hold the
button to go back to the previous song.
Accessories Included in Box
1 x M811-BT Bluetooth earphone
1 x Micro USB Charging Cable
1 x Owners Manual
Ecology
Your product must be disposed of properly
according to local laws and regulations. Because
this product contains a battery, the product must
be disposed of separately from household waste.
Micro USB Cable
To charge Device:
Plug the small (micro) end of the USB cable into
the USB charging port on your headset and plug
the larger end into the USB port on a computer
or AC adapter (not included).
Important Battery Information
Warning: Your product contains a battery and
charging system which is designated to work in
temperatures that do not exceed 50o C (122o F).
Leaving this product in a closed automobile or
the trunk of an automobile where temperatures
may exceed 50o C may result in permanent
battery damage, fire, or explosion. Please
remove your product from the automobile when
you exit, do not place your product in the trunk of
your automobile, and do not leave your product
in any location where temperatures may exceed
50o C.
This product contains a non-removable Lithium-
Ion rechargeable battery.
Precautions of the Unit
Do not use the unit immediately after
transportation from a cold place to a warm
place; condensation problems within the
unit may occur affecting performance.
Do not store the unit near fire, places with
high temperature, and/or in directly sunlight.
Exposure to direct sunlight or extreme heat
(such as inside a parked car) may cause
damage or malfunction.
Clean the unit with a soft cloth or a damp
chamois leather. Never use solvents.
Headset Safety
To use a headset safely, please keep the
following in mind:
Do not play your headset at a high volume.
Hearing experts advise against continuous
extended play.
If you experience ringing in your ears, turn
down the volume or stop using the headset.
Do not use the headset while driving a
motorized vehicle or riding a bike. It may
cause a traffic hazard and is illegal in many
areas.
Even if your headset is an open-air type
designed to let you hear outside sounds,
don’t turn up the volume so you can’t hear
your surroundings.
Never operate heavy machinery while
listening to or wearing your headphones.
Listen Responsibly
To avoid hearing damage, make sure that the
volume on your music player is turned down
before playing music through your sportbuds.
After placing sportbuds in your ears, gradually
turn up the volume until you reach a comfortable
listening level. Noise levels are measured in
decibels (dB), exposure to any noise at or above
85 dB can cause gradual hearing loss. Monitor
your use; hearing loss is a function of loudness
over time. The louder it is, the less time you can
be exposed to it. The softer it is, the more time
you can listen to it.
The Bluetooth® work mark and logos are
registered trademarks owned by Bluetooth SIG,
Inc. and any use of such marks by Edge Imports
Inc. is under license. Other trademarks and trade
names belong to their respective owners.
FCC Information
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired operation.
This device must not be co-located or operating
in conjunction with any other antenna or
transmitter.
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment generates,
uses and can radiate radio frequency energy and,
if not installed and used in accordance with the
instructions, may cause harmful interference to
radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning
the equipment off and on, the user is encouraged
to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV
technician for help.
WARNING: Any changes or modifications to this
unit not expressly approved by the party
responsible for compliance could void the user’s
authority to operate the equipment.
This device must not be collocated or operating
in conjunction with any other antenna or
transmitter.
FCC ID: 2AE9WM811-BT
Model #: M811-BT