Panasonic Devices Europe BC06 Bluetooth Module User Manual DS 1x55 2420 102 V0 91

Download:
Mirror Download [FCC.gov]
Document ID	1097461
Application ID	GsxR32cJSJrBs97PhCTaGQ==
Document Description	OEM Safety Intruction
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	9.08kB (113520 bits)
Date Submitted	2009-04-16 00:00:00
Date Available	2009-04-16 00:00:00
Creation Date	2009-04-08 14:47:56
Producing Software	AFPL Ghostscript 8.54
Document Lastmod	2009-04-08 14:49:28
Document Title	DS-1x55-2420-102_V0.91
Document Creator	FreePDF XP 3.26 - http://shbox.de
Document Author:	Wagner

CLASSIFICATION
Einstufung
SUBJECT
Thema
CUSTOMER’S CODE
PAN1455/1555
PRODUCT SPECIFICATION
Produktspezifikation
CLASS 2 BLUETOOTH MODULE
Bluetooth Modul der Klasse 2
PANASONIC’S CODE
ENW89815C3KF/ENW89815A3KF
No.
REV.
DS-1x55-2400-102
0.91
PAGE
Seite
30 of 32
DATE
30.03.2009
Datum
27. REGULATORY INFORMATION
27.1. FCC NOTICE
The device PAN1555, including the ceramic antenna (ENW89815C3KF) and also the SMD
type PAN1455 (ENW89815A3KF), including with the antennas, which are listed in 27.5,
complies with Part 15 of the FCC Rules. The device meets the requirements for modular
transmitter approval as detailed in FCC public Notice DA00-1407.transmitter
Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received, including
interference that may cause undesired operation.
27.2. CAUTION
The FCC requires the user to be notified that any changes or modifications made to this
device that are not expressly approved by Panasonic Electronic Devices Europe GmbH may
void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
27.3. LABELING REQUIREMENTS
The Original Equipment Manufacturer (OEM) must ensure that FCC labeling requirements
are met. This includes a clearly visible label on the outside of the OEM enclosure specifying
the appropriate Panasonic FCC identifier for this product as well as the FCC Notice above.
The FCC identifier are FCC ID: T7V-BC06. This FCC identifier is valid for both versions, for
details, please see the chapter 24. Ordering Information.
In any case end product must be labelled exterior with "Contains FCC ID: T7V-BC06"
27.4. ANTENNA WARNING
The related part number for this device is ENW89815A3KF (PAN1455 with SMD pad). For
details, please see the chapter 24. Ordering Information. This device are tested with a
standard SMA connector and with the antennas listed below. When integrated in the OEMs
product, these fixed antennas require installation preventing end-users from replacing them
with non-approved antennas. Any antenna exceeding 2dBi not in the following table must be
tested to comply with FCC Section 15.203 for unique antenna connectors and Section 15.247
PANASONIC ELECTRONIC DEVICES EUROPE GMBH
www.pedeu.pansonic.de
CLASSIFICATION
PRODUCT SPECIFICATION
No.
REV.
Einstufung
Produktspezifikation
DS-1x55-2400-102
0.91
SUBJECT
CLASS 2 BLUETOOTH MODULE
PAGE
Thema
Bluetooth Modul der Klasse 2
Seite
31 of 32
CUSTOMER’S CODE
DATE
PANASONIC’S CODE
ENW89815C3KF/ENW89815A3KF
PAN1455/1555
30.03.2009
Datum
for emissions. The FCC identifier for this device with the antenna listed in item 1 are the same
(FCC ID: T7V-BC06).
27.5.
APPROVED ANTENNA LIST
Note: We are able to qualify your antenna and will add to this list as that process is completed.
Item
Part Number
Manufacturer
Frequency Band
Type
Gain (dBi)
WIMO17010.10
Wimo
2.4GHz
ROD
+2
27.6. RF EXPOSURE PAN1455/PAN1555
To comply with FCC RF Exposure requirements, the Original Equipment Manufacturer (OEM)
must ensure that the approved antenna in the previous table must be installed.
The preceding statement must be included as a CAUTION statement in manuals for products
operating with the approved antennas in the previous table to alert users on FCC RF
Exposure compliance.
Any notification to the end user of installation or removal instructions about the integrated
radio module is not allowed.
The radiated output power of PAN1455 with mounted ceramic antenna
(FCC ID: T7V-BC06) is far below the FCC radio frequency exposure limits. Nevertheless, the
PAN1455 shall be used in such a manner that the potential for human contact during normal
operation is minimized.
End users may not be provided with the module installation instructions. OEM integrators and
end users must be provided with transmitter operating conditions for satisfying RF exposure
compliance.
27.7. INDUSTRY CANADA CERTIFICATION
PAN1455/PAN1555 comply with the regulatory requirements of Industry canada (IC), license:
IC: 216Q-BC06
Manufacturers of mobile, fixed or portable devices incorporating this module are advised to
clarify any regulatory questions and ensure compliance for SAR and/or RF exposure limits.
Users can obtain Canadian information on RF exposure and compliance from
www.ic.gc.ca
This device has been designed to operate with the antenna listed in section 27.5 above,
having a maximum gain of 2.0 dBi. Antennas not included in this list or having a gain greater
than 2.0 dBi are strictly prohibited for use with this device. The required antenna impedance
is 50 ohms. The antenna used for this transmitter must not be colocated or operating in
conjunction with any other antenna or transmitter.
28. RELATED DOCUMENTS
Mitgeltende Dokumente
[1] BlueRS+_ATCommand_Reference
PANASONIC ELECTRONIC DEVICES EUROPE GMBH
www.pedeu.pansonic.de
CLASSIFICATION
Einstufung
SUBJECT
Thema
CUSTOMER’S CODE
PAN1455/1555
PRODUCT SPECIFICATION
Produktspezifikation
CLASS 2 BLUETOOTH MODULE
Bluetooth Modul der Klasse 2
PANASONIC’S CODE
ENW89815C3KF/ENW89815A3KF
No.
REV.
DS-1x55-2400-102
0.91
PAGE
Seite
32 of 32
DATE
30.03.2009
Datum
29. GENERAL INFORMATION
Allgemeine Informationen
© Panasonic Electronic Devices Europe GmbH 2009.
All rights reserved.
This product description does not lodge the claim to be complete and free of mistakes.
Please contact the related product manager in every case.
If we deliver ES samples to the customer, these samples have the status Engineering Samples.
This means, the design of this product is not yet concluded. Engineering Samples may be
partially or fully functional, and there may be differences to be published Data Sheet.
Engineering Samples are not qualified and are not to be used for reliability testing or series
production.
Disclaimer:
Customer acknowledges that samples may deviate from the Data Sheet and may bear defects
due to their status of development and the lack of qualification mentioned above.
Panasonic rejects any liability or product warranty for Engineering Samples. In particular,
Panasonic disclaims liability for damages caused by
• the use of the Engineering Sample other than for Evaluation Purposes, particularly the
installation or integration in an other product to be sold by Customer,
• deviation or lapse in function of Engineering Sample,
• improper use of Engineering Samples.
Panasonic disclaimes any liability for consequential and incidental damages.
In case of any questions, please contact your local sales partner or the related product
manager.
30. LIFE SUPPORT POLICY
Politik für Lebenserhaltungssysteme
This Panasonic product is not designed for use in life support appliances, devices, or systems
where malfunction can reasonably be expected to result in a significant personal injury to the
user, or as a critical component in any life support device or system whose failure to perform
can be reasonably expected to cause the failure of the life support device or system, or to affect
its safety or effectiveness. Panasonic customers using or selling these products for use in such
applications do so at their own risk and agree to fully indemnify Panasonic for any damages
resulting.
PANASONIC ELECTRONIC DEVICES EUROPE GMBH
www.pedeu.pansonic.de

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Modify Date                     : 2009:04:08 14:49:28+02:00
Create Date                     : 2009:04:08 14:47:56+02:00
Metadata Date                   : 2009:04:08 14:49:28+02:00
Creator Tool                    : FreePDF XP 3.26 - http://shbox.de
Format                          : application/pdf
Title                           : DS-1x55-2420-102_V0.91
Creator                         : Wagner
Document ID                     : uuid:c3011396-513d-4956-afe1-b0040f983a8e
Instance ID                     : uuid:d4fccbda-1f73-4665-931c-5fb60a2c8756
Producer                        : AFPL Ghostscript 8.54
Page Count                      : 3
Author                          : Wagner

EXIF Metadata provided by EXIF.tools