Panasonic Healthcare 9TB082CRB User Manual 8585 Cover E G F I S
Panasonic Healthcare Co., Ltd. 8585 Cover E G F I S
Exhibit E Instruction Manual
DVD-ROM DRIVE UNIT SR-8585-E INSTRUCTION MANUAL Please read through these instructions before operating this unit. Interface : ATAPI ENGLISH DVD-ROM DRIVE UNIT SR-8585-E INSTRUCTION MANUAL Please read through these instructions before operating this unit. Interface : ATAPI TABLE OF CONTENTS IMPORTANT SAFETY NOTICE ................................................................................ iv LASER SAFETY INFORMATION ............................................................................. A-1 INTRODUCTION ........................................................................................................ A-4 1. PRECAUTIONS WHEN OPERATING ................................................................... A-5 1.1 PRECAUTIONS WHEN TRANSPORTING ...................................................... A-5 1.2 INSTALLATION LOCATION ............................................................................ A-5 1.3 PRECAUTIONS FOR USE .............................................................................. A-5 1.4 PRECAUTIONS FOR OPERATION ................................................................ A-5 1.5 PRECAUTIONS WHEN HANDLING DISCS .................................................... A-5 2. PARTS AND FUNCTIONS .................................................................................... A-7 2.1 FRONT VIEW ................................................................................................... A-7 2.2 REAR VIEW ..................................................................................................... A-7 3. CONNECTIONS ..................................................................................................... A-8 3.1 CONNECTING VIEW ....................................................................................... A-8 4. GUIDE TO OPERATION ....................................................................................... A-8 4.1 INSTALLATIONS ............................................................................................. A-8 5. GENERAL DESCRIPTION .................................................................................... A-9 5.1 FEATURE SUMMARY ..................................................................................... A-9 5.2 SYSTEM SET UP ............................................................................................ A-9 5.3 POWER SAVING ............................................................................................. A-9 6. SPECIFICATION SUMMARY ................................................................................ A-9 6.1 PERFORMANCE ............................................................................................. A-9 6.2 ERROR RATES ............................................................................................... A-10 6.3 AUDIO PERFORMANCE ................................................................................. A-10 6.4 GENERAL PERFORMANCE ........................................................................... A-11 6.5 ENVIRONMENTAL CONDITIONS ................................................................... A-11 6.6 PICK UP LASER .............................................................................................. A-11 7. BEFORE REQUESTING SERVICE ....................................................................... A-11 7.1 TROUBLESHOOTING ..................................................................................... A-11 APPENDIX A. ............................................................................................................ A-12 APPENDIX B. ............................................................................................................ A-14 iii IMPORTANT SAFETY NOTICE NOTICE (1) You may not reproduce or transcribe any part of this publication without permission. (2) We reserve the right to revise this document at any time without notice. (3) If you have any questions about this document, contact your sales representative. SAFETY NOTICE (1) To prevent fire or electric shock, do not expose this appliance to rain or moisture. (2) To avoid electric shock or damage to the eyes due to laser beam, do not attempt to disassemble the cabinet. For USA FEDERAL COMMUNICATIONS COMMISSION (FCC) RADIO FREQUENCY INTERFERENCE STATEMENT Class B Computing Device NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and , if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures : - - Reorient or relocate the receiving antenna. - - Increase the separation between the equipment and receiver. - - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - - Consult the dealer or an experienced radio/TV technician for help. FCC WARNING : Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. iv Class 1 LASER Product This equipment is certified to comply with DHHS Rule 21 CFR Chapter 1, Subchapter J in effect as of date of manufacture. Elsewhere, the drive is certified to conform to the requirements of the International Electrotechnical Commission (IEC) 825 and CENELEC EN60825 for Class 1 laser products. Class 1 laser products are not considered to be hazardous. To ensure continued product safety, the following precautions should be heeded. This equipment has the Optical Pickup which has the Dual Lasers (DVD & CD). Caution : (1) The use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. (2) The drive is designed to be incorporated into a computer-based system or unit which has an enclosing cover. The drive may not be used as a stand-alone unit. (3) Do not open the drive unit; no user adjustments or serviceable parts are inside. CLASS 1 LASER PRODUCT LASER KLASSE 1 LUOKAN 1 LASERLAITE KLASS 1 LASER APPARAT APPAREIL A LASER DE CLASSE 1 EN60825 • This label is attached to the upper shield at the top of the drive unit. • Märkningen återfinns på den översta kåpan överst på drivenheten. (For Swedish) • Denne merkelappen er festet til det øverste dekselet på toppen av spilleren. (For Norwegian) • Denne etiket er sat fast på den øverste skærm på drev-enhedens top. (For Danish) • Tämä etiketti on liimattu voimayksikön yläosan suojalevyyn. (For Finnish) CAUTION– Laser radiation when open. DO NOT STARE INTO BEAM. • This label is attached to the inner side of the rear wall on the Mechanism chassis in the drive unit. A-1 ENGLISH LASER SAFETY INFORMATION CAUTION– LASER RADIATION WHEN OPEN DO NOT STARE INTO BEAM ADVARSEL– º WENN ABDECKUNG GEOFFNET NICHT IN DEN STRAHL BLICKEN ADVARSEL – L ASERSTRALING º º º º LASERSTRALING VED ABNING º SE IKKE IND I STRALEN NAR DEKSEL APNES º STIRR IKKE INN I STRALEN VARNING – LASERSTRALNING .. .. .. VARO ! AVATTAESSA OLET .. ALTTIINA LASERSATEILYLLE .. .. .. ALA TUIJOTA SATEESEEN CAUTION – INVISIBLE L ASER RADIATION WHEN OPEN DO NOT STARE INTO BEAM OR VIEW DIRECTLY WITH OPTICAL INSTRUMENTS VORSICHT– UNSICHTBARE L ASERSTRAHLUNG, WENN ABDECKUNG .. GEOFFNET NICHT IN DEN STRAHL BLICKEN AUCH NICHT MIT OPTISCHEN INSTRUMENTEN ADVARSEL– USYNLIG º º LASERSTRALING VED ABNING. º SE IKKE IND I STRALEN – HELLER IKKE MED OPTISKE INSTRUMENTER. ADVARSEL – ºUSYNLIG º º L ASERSTRALING NAR DEKSEL APNES. º STIRR IKKE INN I STRALEN ELLER SE DIREKTE MED OPTISKE INSTRUMENTER. º NAR DENNA DEL AR OPPNAD º STIRRA EJ IN I STRALEN º VARNING – OSYNLIG .. .. ..LASERSTRALNING NAR DENNA DEL AR OPPNAD. º STIRRA EJ IN I STRALEN OCH BETRAKTA º EJ STRALEN MED OPTISKA INSTRUMENT. • • • • • VORSICHT– L ASERSTRAHLUNG, .. .. .. .. .. VARO ! NAKYMATONTA..AVATTAESSA OLET .. .. .. ALTTIINA LASERSATEILYLLE. .. .. .. ALA TUIJOTA .. SATEESEEN ALAKA.. KATSO SITA OPTISEN LAITTEEN LAPI. This label is attached to the bottom of the drive unit. Märkningen återfinns på drivenhetens undersida. (For Swedish) Denne merkelappen er festet til undersiden av spilleren. (For Norwegian) Denne etiket er sat fast i bunden af drev-enheden. (For Danish) Tämä etiketti on liimattu laitteen pohjaan. (For Finnish) For Finnish VAROITUS! Laitteen käyttäminen muulla kuin tässä käyttöohjeessa mainitulla tavalla saattaa altistaa käyttäjän turvallisuusluokan 1 ylittävälle näkymättömälle lasersäteilylle. For Swedish VARNING! A-2 Om apparaten används på annat sätt än i denna bruksanvisning specificerats, kan användaren utsättas för osynlig laserstrålning, som överskrider gränsen för laserklass 1. for CD LASER Specification Type: Semiconductor laser GaAlAs Wave Length: 775 ~ 815 nm (Typical 790 nm) Divergence: θ = 53.4 ° ± 3 ° Output Power: 0.21 mW Laser- specifikationer: (For Swedish) Typ: Laserhalvedare GaAlAs Våglängd: 775 ~ 815 nm (Typiskt 790 nm) Divergens: θ = 53,4 ° ± 3 ° Uteffekt: 0,21 mW LASER Spesifikasjon: (For Norwegian) Type: Halvleder laser GaAlAs Bølgelengde: 775 ~ 815 nm (Typisk 790 nm) Divergens: θ = 53,4 ° ± 3 ° Utgangseffekt: 0,21 mW Laser Specifikationer: (For Danish) Type: Semiconductor GaAlAs Bølge-længde: 775 ~ 815 nm (Typisk 790 nm) Divergens: θ = 53,4 ° ± 3 ° Udgang-effekt: 0,21 mW LASERin tekniset tiedot: (For Finnish) Tyyppi: Laserpuolijohdin GaAlAs Aallon pituus: 775 ~ 815 nm (Tyypillinen 790 nm) Hajaantuminen: θ = 53,4 ° ± 3 ° Teho: 0,21 mW A-3 ENGLISH for DVD LASER Specification Type: Semiconductor laser GaAs Wave Length: 658 ± 8 nm Divergence: θ = 73.7 ° ± 3 ° Output Power: 0.8 mW Laser- specifikationer: (For Swedish) Typ: Laserhalvedare GaAs Våglängd: 658 ± 8 nm Divergens: θ = 73,7 ° ± 3 ° Uteffekt: 0,8 mW LASER Spesifikasjon: (For Norwegian) Type: Halvleder laser GaAs Bølgelengde: 658 ± 8 nm Divergens: θ = 73,7 ° ± 3 ° Utgangseffekt: 0,8 mW Laser Specifikationer: (For Danish) Type: Semiconductor GaAs Bølge-længde: 658 ± 8 nm Divergens: θ = 73,7 ° ± 3 ° Udgang-effekt: 0,8 mW LASERin tekniset tiedot: (For Finnish) Tyyppi: Laserpuolijohdin GaAs Aallon pituus: 658 ± 8 nm Hajaantuminen: θ = 73,7 ° ± 3 ° Teho: 0,8 mW INTRODUCTION DVD-ROM is read-only memory using a CD-ROM disc system and an audio compact disc system as a media package which handles digital data. To enjoy audio CD, please insert the Headphone plug into the Headphone jack. This drive unit uses DVD-ROM discs which bear the following mark. TM This drive unit uses CD-ROM discs which bear the following mark. COMPACT This drive unit uses CD-R discs which bear the following mark (read only). COMPACT Recordable This drive unit uses audio compact discs which bear the following mark. COMPACT DIGITAL AUDIO System Requirements • Computer IBM PC-AT or Compatible A-4 • Operating System PC-DOS Ver. 6.3 or later MS-DOS Ver. 6.2 or later MS Windows 3.1 MS Windows 95 MS Windows 98 1.1 PRECAUTIONS WHEN TRANSPORTING To avoid damage * Keep the original packing materials for the drive unit. * Before you transport the drive unit, remove the disc from the drive unit and repack the drive unit in its original packing. 1.2 INSTALLATION LOCATION Do not place unit in the following environments. * High-temperature, high-humidity, extreme temperature changes. * Dusty * Excessive vibration/ sudden shock. * Inclined place. * Direct sunlight. 1.3 PRECAUTIONS FOR USE * Never push objects of any kind through the Cabinet slots, never spill liquid of any kind on the unit. * Do not place objects on the product. * Do not attempt to service this product yourself. * Do not open or remove covers. * Do not place foreign objects in the disc insertion slot and attempt to operate. * Do not use CD-ROM drive when vertically installed. (Horizontal installation type only) 1.4 PRECAUTIONS FOR OPERATION To avoid error * Do not move the drive unit during operation. * Do not operate the unit directly after a sudden increase in temperature. NOTE : A great proportion of problems are usually caused by the following. ➀ Dust or Finger-prints on the surface of the disc. ➁ Random Electrical Noise. ➂ Scratches and Defects on the surface of the disc. 1.5 PRECAUTIONS WHEN HANDLING DISCS ➀ Hold the disc by the edges, do not touch the surface of the disc. ➁ To remove dust or fingerprint, use a clean, soft, dry cloth. A-5 ENGLISH CHAPTER 1 PRECAUTIONS WHEN OPERATING ➂ Do not write on, or paste paper to the surface of the disc. Should not paste a large or thick label to the outer back surface (the label side) of the disc, or it generates drive vibration due to imbalance of the disc. ➃ Do not store the disc in a place where the temperature is high. ➄ Do not use benzine, thinners and cleaners, etc. T h inne r s B en zin e ➅ Do not make the center hole larger. ➆ Do not bend the disc. ➇ Do not drop the disc, or subject it to shock. A-6 C le ane r s CHAPTER 2 PARTS AND FUNCTIONS 2.1 FRONT VIEW ➀ DISC TRAY ➁ ➂ ➃ ENGLISH ➀ ➅ ➄ Accepts a disc. ➁ HEAD PHONE JACK Headphone can be connected using a 3.5mm stereo mini plug. ➂ VOLUME Adjusts audio output level of Headphone. ➃ BUSY INDICATOR Lights when data is being accessed from the disc, or the drive is playing an audio CD. ➄ EJECT/LOAD BUTTON Ejects and loads the disc tray. ➅ EMERGENCY EJECT HOLE Insert an instrument such as straightened paper clip into this hole to manually eject the tray. (See 4.1) 2.2 REAR VIEW ➄ ➂ ➃ ➀ ➁ ➀ INTERFACE CONNECTOR Connects to host computer’s interface connector. ➁ DC (IN) CONNECTOR ➂ AUDIO OUT CONNECTOR (Analog) ➃ JUMPER PIN Insert the jumper according to the Master / Slave / CSEL drive. (See the figure in the next page.) ➄ DIGITAL AUDIO OUT CONNECTOR NOTE: The serial format of digital data (not Audio data) output functions with some models. A-7 CHAPTER 3 CONNECTIONS 3.1 CONNECTING VIEW DC (IN) Connector Interface Connector Jumper Pin DC Power Connector Audio Out Connector Digital Audio Out Connector Jumper Drive-Select (Master/Slave/CSEL) Cable select (CSEL) Slave Interface Cable Master CHAPTER 4 GUIDE TO OPERATION 4.1 INSTALLATIONS • Starting the drive. ➀ Turn on the power supply. ➁ Press the eject button. The tray is ejected from the drive. ➂ Place the disc in the tray with the disc’s label facing up. ➃ Press the eject button or press the tray lightly as in the following figure. The tray is retracted automatically. ➄ Loading start. * This figure shows in case of Horizontal Installation. CAUTION: • Do not insert any foreign objects into the disc tray. This could result in a malfunction. • Do not manually force the tray to open. • When the drive is not in use, keep the tray closed to protect against dust and dirt. • Do not press down hard on the tray when loading a disc, since this may result in damage to or malfunction of the tray. • In case of emergency, eject the tray manually If for some reason the tray will not eject automatically, press the eject-bar (for example, insert a straightened paper clip minimum straight length = 45 mm, Diameter = 1 ~ 1.5 mm) into the emergency eject hole to manually eject the tray. (Before proceeding with this emergency step, make sure that the power is switched OFF.) A-8 Min. 45 mm Paper clip CHAPTER 5 GENERAL DESCRIPTION ENGLISH 5.1 FEATURE SUMMARY ➀ Embedded ATAPI Interface. ➁ Automatic Loading with tray. ➂ Horizontal and Vertical Installation. (Vertical : Vertical installation type only, 12 cm Disc only) ➃ Audio Playback Capability. ➄ MS-DOS CD-ROM Extensions Available. ➅ 5 1/4” Half Height Design. 5.2 SYSTEM SET UP The ATAPI Devices are selected by the Address field in the Drive Select Register. When a single Device is attached to the interface, it shall be set as Device 0. When the ATAPI Device is attached along with an ATA Mass Storage Device, the ATAPI Device will be set as Device 1 and respond as a Slave. 5.3 POWER SAVING ➀ When the drive waits for a command from the Host for more than two minutes, then the drive enters Power Save Mode. Laser and Spindle motor stop. ➁ Re-start is automatic when the Host Command is received or eject button is pushed. NOTE : • ATAPI : AT Attachment Packet Interface. • MS-DOS and MS Windows are trademarks or registered trademarks of Microsoft Corporation. • IBM PC-AT is a registered trademark of International Business Machines Corporation. CHAPTER 6 SPECIFICATION SUMMARY 6.1 PERFORMANCE ➀ Disc diameter 12cm, 8cm ➁ Disc speed (DVD CAV mode) (CD CAV mode) ➂ Data capacity 4600 r/min (CAV) *1 7900 ~ 9220 r/min (CAV) 4.7 GBytes (DVD Single Layer) 8.5 GBytes (DVD Dual Layer) 540 MBytes typical (12 cm CD Disc) 180 MBytes typical (8 cm CD Disc) ➃ Data transfer Rate Sequential (DVD CAV mode) Sequential (CD CAV mode) From buffer 4480 ~ 10820 KBytes/s 2590 ~ 6000 KBytes/s (Mode 1) 16.67 MBytes/s (PIO Mode 4 without IORDY) 16.67 MBytes/s (Multi-word DMA Mode 2) 33.3 MBytes/s (Ultra DMA Mode 2) *2 A-9 ➄ Access time Random access time (DVD CAV mode) *3 Fullstroke access time (DVD CAV mode) *4 Random access time (CD CAV mode) *5 Fullstroke access time (CD CAV mode) *6 125 ms typical 270 ms typical 90 ms typical 180 ms typical ➅ Buffer Size 512 KBytes MTBF 125,000 POH (duty 20%) NOTE: *1 CAV : Constant Angular Velocity *2 This performance functions with some models. *3 Random access time (DVD) :Average Data read over the complete area from starting data recorded area(LBA:0) to maximam data recorded area(LBA:23197F), more than 2000 times including latency and layered error correction time. *4 Fullstroke access time (DVD) : From starting data recorded area (LBA:0) to maximam data recorded area (LBA:23197F) including latency and layered error correction time. *5 Random access time (CD) : Average Data read over the complete area from 00 min. 02 sec. 00 block to 59 min. 58 sec. 74 blocks, more than 2000 times including latency and layered error correction time. *6 Fullstroke access time (CD) : From 00 min. 02 sec. 00 block to 59 min. 58 sec. 74 blocks including latency and layered error correction time. 6.2 ERROR RATES • Soft read errors • Hard read errors 6.3 AUDIO PERFORMANCE (1) Analog audio ➀ Number of channels ➁ Frequency response ➂ SN Ratio ➃ Distortion ➄ • Line-out • Headphone Output level (2) Digital audio ➀ Output level ➁ Data format A-10 Less than 10 -9 Less than 10 -12 100 Hz ~ 20 kHz (Headphone) 20 Hz ~ 20 kHz (Line-out) More than 80 dB (Headphone/ Line-out) Less than 0.1 % (1 kHz) Less than 0.2 % (1 kHz) 0.60 Vrms typ. (Headphone/ Line-out) 3.3V CMOS level Base a decision on IEC-958 ➁ Dimensions (W x H x D) ➂ Weight +5 V 1.0 A +12 V 2.0 A 146 x 41.3 x 190 mm(exclude Front Bezel) 890 g typical ENGLISH 6.4 GENERAL PERFORMANCE ➀ Power requirement 6.5 ENVIRONMENTAL CONDITIONS Operating • Temperature 5 ~ 50 °C • Humidity 5 ~ 90 %RH (Max. wet bulb temp. is 29 °C, Non-condensation) Non-operating • Temperature • Humidity – 30 ~ 65 °C 5 ~ 90 %Rh (Non-condensation) 6.6 PICK UP LASER ➀ for DVD • Type • Wave Length • Divergence • Output power Semiconductor laser GaAs 658 ± 8 nm θ = 73.7 ° ± 3 ° 0.8 mW ➁ for CD • Type • Wave Length • Divergence • Output power Semiconductor laser GaAlAs 775 ~ 815 nm (Typical 790 nm) θ = 53.4 ° ± 3 ° 0.21 mW CHAPTER 7 BEFORE REQUESTING SERVICE 7.1 TROUBLESHOOTING (1) There are many kinds of problems caused by misuse. When a problem occurs, check the table below which describes possible problems occurring with your DVD-ROM drive. (2) If the DVD-ROM drive is not operating correctly and you cannot restore operation by following the detailed procedures in the table below, do not remove the cover of the units or adjust further. (3) In the case of (2) above, unplug the unit and consult with your dealer or the nearest service station. TROUBLE • DVD-ROM drive does not operate and Busy Indicator does not light. CORRECTION ➀ Confirm that the connection between the DVD-ROM ➁ ➂ ➃ ➄ drive and the host computer is correct. Confirm that the program is correct. Confirm that the setting drive select switch is correct. Confirm that the disc has been inserted label side up. Confirm that foreign objects have not been inserted. A-11 APPENDIX A. Easy Installation of the Device Driver for Windows 95 (This Device Driver is required when reading a DVD-RAM disc under Windows 95.) The SR-8585-E DVD-ROM drive must be installed into your host computer, before installing this device driver. 1. Turn the power of your personal computer on and start up Windows 95 . 2. Insert the floppy disk “Device Driver for DVD-ROM drive” into your floppy disk drive. 3. Open Run… window from the Start menu as shown below. 4. Type “A:\SETUP.EXE” and press OK. 5. Read the messages and press Next on Setup Software! window. A-12 ENGLISH 6. Select “Install ATAPI-DVD device driver” and press Next on Select Components window. 7. Press Finish on Restart Windows as it is. Your personal computer will automatically restart and install this SR-8585-E device driver. NOTE: This SR-8585-E DVD-ROM drive does not support the FAT formatted DVD-RAM discs. A-13 APPENDIX B. Easy Installation of the Device Driver for DOS / Windows 3.1 The SR-8585-E DVD-ROM drive must be installed into your host computer, before installing this device driver. 1. Turn the power of your personal computer on. If your system automatically loads Windows, you must exit Windows and reach the DOS prompt C:\ . This explanation assumes that your floppy drive is designed "A" and your hard disk drive "C". If, however, you have used other letters to designate your drives, please substitute the appropriate letters. 2. Insert the floppy disk “Device Driver for DVD-ROM drive” into your floppy disk drive. 3. Type A: and press. The current drive changes to “A”. 4. Type INSTALL and press . 5. Type “ 2 ” and press for selection of Installation menu. Installation menu 1. Custom Installation 2. Express Installation. 3. Quit Please input number -> The software will then be transferred, and the CONFIG.SYS, and AUTOEXEC.BAT, etc. will be changed. Note: If you want to designate the drive / directory where to install, select “1” of Installation menu. 6. After you check MSCDEX for use, type “ Y ” and press . Now. in installation point drive C, MSCDEX in seaching ... MSCDEX is found in the directory as follow. C:\DOS\MSCDEX.EXE Is this MSCDEX installed on the system ? [Y/N] The completion message appears, and reach the DOS prompt. 7. Eject the floppy disk from the floppy disk drive. After the installation, keep this floppy disk for future use. 8. To restart the system, press the reset button on your personal computer, or the following keys: Ctrl Alt + Delete Check that the device driver of this equipment has been installed during the start-up procedure. Every time DOS is started, the device driver of this equipment will be automatically installed. A-14 Weight and dimensions shown are approximate. Specifications are subject to change without notice. LMQT00408
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Create Date : 1999:08:23 18:49:32 Producer : Acrobat Distiller 3.0J (Power Macintosh 版) Subject : Creator : Adobe PageMaker 6.0J Author : M. Kainou Title : 8585(Cover)E/G/F/I/S Modify Date : 1999:11:25 15:52:39 Page Count : 18EXIF Metadata provided by EXIF.tools