Panasonic Healthcare 9TB084CRB CD-ROM Drive User Manual 594 Text Eng

Panasonic Healthcare Co., Ltd. CD-ROM Drive 594 Text Eng

Exhibit E Instruction Manufal

CD-ROM DRIVE UNITCR-594-B / CR-594-CINSTRUCTION MANUALPlease read through these instructions before operating this unit.Interface : ATAPI
ENGLISHiiiCD-ROM DRIVE UNITCR-594-B / CR-594-CINSTRUCTION MANUALPlease read through these instructions before operating this unit. Interface : ATAPITABLE OF CONTENTSIMPORTANT SAFETY NOTICE1. PRECAUTIONS WHEN OPERATING................................................................... A-3 1.1 PRECAUTIONS WHEN TRANSPORTING...................................................... A-3 1.2 INSTALLATION LOCATION ............................................................................ A-3 1.3 PRECAUTIONS FOR USE .............................................................................. A-3 1.4 PRECAUTIONS FOR OPERATION ................................................................ A-3 1.5 PRECAUTIONS WHEN HANDLING DISCS.................................................... A-32. PARTS AND FUNCTIONS .................................................................................... A-5 2.1 FRONT VIEW................................................................................................... A-5 2.2 REAR VIEW ..................................................................................................... A-53. CONNECTIONS..................................................................................................... A-6 3.1 CONNECTING VIEW ....................................................................................... A-64. GUIDE TO OPERATION ....................................................................................... A-6 4.1 INSTALLATIONS ............................................................................................. A-65. GENERAL DESCRIPTION .................................................................................... A-7 5.1 FEATURE SUMMARY ..................................................................................... A-7 5.2 SYSTEM SET UP ............................................................................................ A-7 5.3 POWER SAVING ............................................................................................. A-76. SPECIFICATION SUMMARY ................................................................................ A-7 6.1 PERFORMANCE ............................................................................................. A-7 6.2 ERROR RATES ............................................................................................... A-8 6.3 AUDIO PERFORMANCE ................................................................................. A-8 6.4 GENERAL PERFORMANCE ........................................................................... A-9 6.5 ENVIRONMENTAL CONDITIONS ................................................................... A-9 6.6 PICK UP LASER .............................................................................................. A-97. BEFORE REQUESTING SERVICE....................................................................... A-9 7.1 TROUBLESHOOTING ..................................................................................... A-9APPENDIX ...............................................................................................................A-10* Model CR-594-B
ivIMPORTANT SAFETY NOTICENOTICE(1) You may not reproduce or transcribe any part of this publication without permission.(2) We reserve the right to revise this document at any time without notice.(3) If you have any questions about this document, contact your sales representative.SAFETY NOTICE(1) To prevent fire or electric shock, do not expose this appliance to rain or moisture.(2) To avoid electric shock or damage to the eyes due to laser beam, do not attempt todisassemble the cabinet.FEDERAL COMMUNICATIONS COMMISSION (FCC) RADIOFREQUENCY INTERFERENCE STATEMENTClass B Computing DeviceNOTE : This equipment has been tested and found to comply with the limits for a Class Bdigital device, pursuant to part 15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference in a residential installation. Thisequipment generates, uses and can radiate radio frequency energy and , if not installedand used in accordance with the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference will not occur in aparticular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on, theuser is encouraged to try to correct the interference by one or more of the followingmeasures :- - Reorient or relocate the receiving antenna.- - Increase the separation between the equipment and receiver.- - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.- - Consult the dealer or an experienced radio/TV technician for help.FCC WARNING : Changes or modifications not expressly approved by the partyresponsible for compliance could void the user's authority to operate the equipment.For USA (Model CR-594-B only)
A-1ENGLISHLASER SAFETY INFORMATIONClass 1 LASER ProductThis equipment is certified to comply with DHHS Rule 21 CFR Chapter 1,Subchapter J ineffect as of date of manufacture.Elsewhere, the drive is certified to conform to the requirements of the InternationalElectrotechnical Commission (IEC) 825 and CENELEC EN60825 for Class 1 laserproducts.Class 1 laser products are not considered to be hazardous. To ensure continued productsafety, the following precautions should be heeded.• This label is attached to the upper shield at the top of the drive unit.• Märkningen återfinns på den översta kåpan överst på drivenheten. (For Swedish)• Denne merkelappen er festet til det øverste dekselet på toppen av spilleren.(For Norwegian)• Denne etiket er sat fast på den øverste skærm på drev-enhedens top. (For Danish)• Tämä etiketti on liimattu voimayksikön yläosan suojalevyyn. (For Finnish)• This label is attached to the bottom of the drive unit.• Märkningen återfinns på drivenhetens undersida. (For Swedish)• Denne merkelappen er festet til undersiden av spilleren. (For Norwegian)• Denne etiket er sat fast i bunden af drev-enheden. (For Danish)• Tämä etiketti on liimattu laitteen pohjaan. (For Finnish)Caution :(1) The use of controls or adjustments or performance of procedures other than thosespecified herein may result in hazardous radiation exposure.(2) The drive is designed to be incorporated into a computer-based system or unit whichhas an enclosing cover. The drive may not be used as a stand-alone unit.(3) Do not open the drive unit; no user adjustments or serviceable parts are inside.CLASS 1 LASER PRODUCTLASER KLASSE 1LUOKAN 1 LASERLAITEKLASS 1 LASER APPARATAPPAREIL A LASER DE CLASSE 1EN60825 CAUTION –INVISIBLE LASER RADIATION WHEN OPEN DO NOT STARE INTO BEAM OR VIEWDIRECTLY WITH OPTICAL INSTRUMENTS VORSICHT –UNSICHTBARE LASERSTRAHLUNG, WENN ABDECKUNG GEÖFFNET NICHT IN DEN STRAHL BLICKEN AUCH NICHT MIT OPTISCHEN INSTRUMENTEN ADVARSEL –USYNLIG LASERSTRÅLING VED ÅBNING. SE IKKE IND I STRÅLEN – HELLER IKKE MED OPTISKE INSTRUMENTER. ADVARSEL –USYNLIG LASERSTRÅLING NÅR DEKSEL ÅPNES. STIRR IKKE INN I STRÅLEN ELLER SE DIREKTE MED OPTISKE INSTRUMENTER. VARNING –OSYNLIG LASERSTRÅLNING NÄR DENNA DEL ÄR ÖPPNAD. STIRRA EJ IN I STRÅLEN OCH BETRAKTA EJ STRÅLEN MED OPTISKA INSTRUMENT. VARO! NÄKYMÄTÖNTÄ AVATTAESSA OLET ALTTIINA LASERSÄTEIL YLLE. ÄLÄ TUIJOTA SÄTEESEEN ÄLÄKÄ KATSO SITÄ OPTISEN LAITTEEN LÄPI.
A-2INTRODUCTIONCD-ROM drive is read-only memory using an audio compact disc system as a mediapackage which handles digital data. To enjoy audio CD, please insert the Headphone pluginto the Headphone jack. (Model CR-594-B only) This drive unit uses CD-ROM discs which bear the following mark. Only compact discs having this mark can be used with this unit.VAROITUS! Laitteen käyttäminen muulla kuin tässä käyttöohjeessa mainitulla tavallasaattaa altistaa käyttäjän turvallisuusluokan 1 ylittävälle näkymättömällelasersäteilylle.VARNING! Om apparaten används på annat sätt än i denna bruksanvisningspecificerats, kan användaren utsättas för osynlig laserstrålning, somöverskrider gränsen för laserklass 1.For FinnishFor SwedishLASER SpecificationType: Semiconductor laser AlGaAsWave Length: 760 ~ 815 nm(Typical 785 nm)Divergence:θ = 53.5 °Output Power: 0.15 mWLaser- specifikationer: (For Swedish)Typ: Laserhalvedare AlGaAsVåglängd: 760 ~ 815 nm(Typiskt 785 nm)Divergens:θ = 53,5 °Uteffekt: 0,15 mWLASER Spesifikasjon: (For Norwegian)Type: Halvleder laser AlGaAsBølgelengde: 760 ~ 815 nm(Typisk 785 nm)Divergens:θ = 53,5 °Utgangseffekt: 0,15 mWSystem Requirements• ComputerIBM PC-AT or Compatible• Operating SystemPC-DOS Ver. 5.0 or laterMS-DOS Ver. 5.0 or laterMS Windows 3.1MS Windows 95 / 98MS Windows NT3.5 / NT3.51 / NT4.0OS/2 2.1X or laterCOMPACTCOMPACTDIGITAL AUDIOLaser Specifikationer: (For Danish)Type: Semiconductor AlGaAsBølge-længde: 760 ~ 815 nm(Typisk 785 nm)Divergens:θ = 53,5 °Udgang-effekt: 0,15 mWLASERin tekniset tiedot: (For Finnish)Tyyppi: Laserpuolijohdin AlGaAsAallon pituus: 760 ~ 815 nm(Tyypillinen 785 nm)Hajaantuminen:θ = 53,5 °Teho: 0,15 mW
A-3ENGLISHCHAPTER 1 PRECAUTIONS WHEN OPERATING1.1 PRECAUTIONS WHEN TRANSPORTINGTo avoid damage* Keep the original packing materials for the drive unit.* Before you transport the drive unit, remove the disc from the drive unit and repack the drive unit in its original packing.1.2 INSTALLATION LOCATIONDo not place unit in the following environments.* High-temperature, high-humidity, extreme temperature changes.* Dusty* Excessive vibration/ sudden shock.* Inclined place.* Direct sunlight.1.3 PRECAUTIONS FOR USE* Never push objects of any kind through the Cabinet slots, never spill liquid of any kind on the unit.* Do not place objects on the product.* Do not attempt to service this product yourself.* Do not open or remove covers.* Do not place foreign objects in the disc insertion slot and attempt to operate.* Do not use CD-ROM drive when vertically installed. (Horizontal installation type only)1.4 PRECAUTIONS FOR OPERATIONTo avoid error* Do not move the drive unit during operation.* Do not operate the unit directly after a sudden increase in temperature.NOTE :A great proportion of problems are usually caused by the following.➀ Dust or Finger-prints on the surface of the CD-disc.➁ Random Electrical Noise.➂ Scratches and Defects on the surface of the CD-disc.1.5 PRECAUTIONS WHEN HANDLING DISCS➀Hold the disc by the edges, do not touchthe surface of the disc.➁To remove dust or fingerprint, use a clean,soft, dry cloth.
A-4➂Do not write on, or paste paperto the surface of the disc.Should not paste any label to theouter back surface (the labelside) of the disc, or it generatesdrive vibration due to imbalanceof the disc.➃Do not store the disc in a place wherethe temperature is high.➄Do not use benzine, thinners andcleaners, etc.➅Do not make the center hole larger.➆Do not bend the disc.➇Do not drop the disc, or subject it toshock.ThinnersCleanersBenzine
A-5ENGLISHCHAPTER 2 PARTS AND FUNCTIONS2.1 FRONT VIEW➀ DISC TRAY Accepts a disc.➁ HEAD PHONE JACK Headphone can be connected using a 3.5mm stereo mini plug.➂ VOLUME Adjusts audio output level of Headphone.➃ BUSY INDICATOR Lights when data is being accessed from the disc, or the drive is playing an audio CD.➄ EJECT / LOAD BUTTON Ejects and loads the disc tray.➅ EMERGENCY EJECT HOLE Insert an instrument such as straightened paper clip into this hole to manually eject the tray. (See 4.1)2.2 REAR VIEW➀ INTERFACE CONNECTOR Connects to host computer’s interface connector.➁ DC (IN) CONNECTOR➂ AUDIO OUT CONNECTOR (Analog)➃ JUMPER PINInsert the jumper according to the Master / Slave / CSEL drive.(See the figure in the next page.)➄ DIGITAL AUDIO OUT CONNECTOR➀➁➂➃➄➀➁➂➃ ➄➅(Model CR-594-B only)(Model CR-594-B only) NOTE:The serial format of digital data (not Audio data) output functions with some model.
A-6CHAPTER 3 CONNECTIONS3.1 CONNECTING VIEWJumper PinAudio Out ConnectorDC (IN) ConnectorDC Power ConnectorJumperDrive-Select (Master/Slave/CSEL)Cable select (CSEL)SlaveMaster (default)Interface ConnectorCHAPTER 4 GUIDE TO OPERATION4.1 INSTALLATIONS • Starting the drive.➀Turn on the power supply.➁Press the eject button. The tray is ejected fromthe drive.➂Place the disc in the tray with the disc’s label fac-ing up.➃Press the eject button or press the tray lightly asin the following figure.The tray is retracted automatically.➄Loading start.CAUTION:• Do not insert any foreign objects into the disc tray. This could result in amalfunction.• Do not manually force the tray to open.• When the drive is not in use, keep the tray closed to protect against dust and dirt.• Do not press down hard on the tray when loading a disc, since this may resultin damage to or malfunction of the tray.• In case of emergency, eject the tray manuallyIf for some reason the tray will not eject automatically, pressthe eject-bar (for example, insert a straightened paper clipminimum straight length = 45mm, Diameter = 1~ 1.5mm)into the emergency eject hole to manually eject the tray. (Be-fore proceeding with this emergency step, make sure thatthe power is switched OFF.)* This figure shows in case ofHorizontal Installation.Min. 45 mmPaper clipInterface CableDigital Audio OutConnector
A-7ENGLISHCHAPTER 5 GENERAL DESCRIPTION5.1 FEATURE SUMMARY➀Embedded ATAPI Interface.➁Automatic Loading with tray.➂Horizontal and Vertical Installation. (Vertical : Vertical installation type only, 12 cm Disc only)➃Audio Playback Capability.➄5 1/4" Half Height Design.5.2 SYSTEM SET UPThe ATAPI Devices are selected by the Address field in the Drive Select Register. Whena single Device is attached to the interface, it shall be set as Device 0. When the ATAPIDevice is attached along with an ATA Mass Storage Device, the ATAPI Device will beset as Device 1 and respond as a Slave.5.3 POWER SAVING➀When the drive waits for a command from the Host for more than five minutes,then the drive enters Power Save Mode. Laser and Spindle motor stop.➁Re-start is automatic when the Host Command is received.NOTE :• ATAPI : AT Attachment Packet Interface.• MS-DOS and MS Windows are trademarks or registered trademarks of MicrosoftCorporation.•IBM PC-AT and OS/2 are registered trademarks of International Business MachinesCorporation.CHAPTER 6 SPECIFICATION SUMMARY6.1 PERFORMANCE➀ Disc diameter 12 cm, 8 cm➁ Disc speed(48x mode) *1 10000 r/min [Max] (CAV) *2➂ Data capacity 656 MBytes (Mode 1)748 MBytes (Mode 2)➃ Data transfer RateSequential (48x mode) 3103 ~ 7200 KBytes/s (Mode 1)(mean value; 5152 KBytes/s)From buffer 16.7 MBytes/s (PIO Mode 4)16.7 MBytes/s (Multi-word DMA Mode 2)8.3 MBytes/s (Single word DMA Mode 2)33.3 MBytes/s (Ultra DMA Mode 2)
A-8➄ Access timeRandom access time *3 (48x mode) 90 ms [ typical ]Fullstroke access time *4 (48x mode) 180 ms [ typical ]➅ Buffer Size 128 KBytesMTBF 125,000 POH (DUTY 20%)NOTE:*1 48x mode: 48x speed mode*2 CAV : Constant Angular Velocity*3 Random access time : Average Data read over the complete area from00 min. 02 sec. 00 block to 59 min. 58 sec.74 blocks, more than 2000 times includinglatency and layered error correction time.*4 Fullstroke access time : From 00 min. 02 sec. 00 block to 59 min. 58 sec.74 blocks including latency and layered errorcorrection time.6.2 ERROR RATES• Soft read errors Less than 10 -9• Hard read errors Less than 10 -126.3 AUDIO PERFORMANCE(1) Analog audio (Headphone functions with Model CR-594-B only)➀ Number of channels 2➁ Frequency response 20 Hz ~ 20 kHz (Line-out)100 Hz ~ 20 kHz (Headphone)➂ SN Ratio More than 80 dB (Line-out / Headphone)➃ Distortion• Line-out Less than 0.1% (1 kHz)• Headphone Less than 0.2% (1 kHz)➄ Output level• Line-out 0.60 Vrms [ typical ]• Headphone 0.60 Vrms [ typical ](2) Digital audio➀ Output level TTL level➁ Data format Base a decision on IEC-958
A-9ENGLISH6.4 GENERAL PERFORMANCE➀ Power requirement +5 V 1.5 A+12 V 1.8 A➁ Dimensions (W x H x D) 146 x 41.3 x 190 mm (exclude Front Bezel)➂ Weight 865 g typical6.5 ENVIRONMENTAL CONDITIONSOperating Non-operating• Temperature 5 ~ 50 °C – 30 ~ 65 °C• Humidity 5 ~ 90 %Rh 5 ~ 95 %Rh(Non-condensation) (Non-condensation)6.6 PICK UP LASER• Type Semiconductor laser AlGaAs• Wave Length 760 ~ 815 nm (Typical 785 nm)• Divergenceθ = 53.5 °• Output power 0.15 mWCHAPTER 7 BEFORE REQUESTING SERVICE7.1 TROUBLESHOOTING(1) There are many kinds of problems caused by misuse. When a problem occurs,check the table below which describes possible problems occurring with yourCD-ROM drive.(2) If the CD-ROM drive is not operating correctly and you cannot restore operation byfollowing the detailed procedures in the table below, do not remove the cover ofthe units or adjust further.(3) In the case of (2) above, unplug the unit and consult with your dealer or the nearestservice station. TROUBLE• CD-ROM drive does not op-erate and Busy Indicatordoes not light.CORRECTION➀Confirm that the connection between the CD-ROM driveand the host computer is correct.➁Confirm that the program is correct.➂Confirm that the setting drive select switch is correct.➃Confirm that the disc has been inserted label side up.➄Confirm that foreign objects have not been inserted.
A-10APPENDIXEasy Installation of the Software for DOS / Windows 3.1The CR-594-B/C CD-ROM drive must be installed into your host computer,before installing this software.1. Turn the power of your personal computer on. If your system automatically loads Windows,you must exit Windows and reach the DOS prompt C:\.This explanation assumes that your floppy drive is designed "A" and your hard diskdrive "C". If, however, you have used other letters to designate your drives, please substitutethe appropriate letters.2. Insert the floppy disk "M.K.E ATAPI Device Driver" into your floppy disk drive.3. Type A: and press <Enter>.The current drive changes to "A".4. Type INSTALL and press <Enter>.The software will then ask the destination drive as well as other parameters. The softwarewill then be transferred, and the CONFIG.SYS, and AUTOEXEC.BAT, etc. will be changed.5. Follow the procedures displayed on your screen until the completion message appears.6. Eject the floppy disk from the floppy disk drive.After the installation, keep this floppy disk for future use.7. To restart the system, press the reset button on your personal computer, or the followingkeys:Check that the device driver of this equipment has been installed during the start-upprocedure.Every time DOS is started, the device driver of this equipment will be automatically installed.If you have installed only the device driver for Windows, you do not need to restart thesystem.Ctrl + Alt + Delete
Weight and dimensions shown are approximate.Specifications are subject to change without notice.LMQT00437 Created in JapanRev. A

Navigation menu