Panasonic Healthcare 9TB093CRB DVD-ROM Drive User Manual 8587BC Text

Panasonic Healthcare Co., Ltd. DVD-ROM Drive 8587BC Text

users manual

DVD-ROM DRIVE UNITSR-8588-B / SR-8588-CINSTRUCTION MANUALPlease read through these instructions before operating this unit.Interface : ATAPI
iiiENGLISHDVD-ROM DRIVE UNITSR-8588-B / SR-8588-CINSTRUCTION MANUALPlease read through these instructions before operating this unit. Interface : ATAPITABLE OF CONTENTSIMPORTANT SAFETY NOTICE ................................................................................ ivLASER SAFETY INFORMATION ............................................................................. A-1INTRODUCTION........................................................................................................ A-41. PRECAUTIONS WHEN OPERATING................................................................... A-5 1.1 PRECAUTIONS WHEN TRANSPORTING...................................................... A-5 1.2 INSTALLATION LOCATION ............................................................................ A-5 1.3 PRECAUTIONS FOR USE .............................................................................. A-5 1.4 PRECAUTIONS FOR OPERATION ................................................................ A-5 1.5 PRECAUTIONS WHEN HANDLING DISCS.................................................... A-52. PARTS AND FUNCTIONS .................................................................................... A-7 2.1 FRONT VIEW................................................................................................... A-7 2.2 REAR VIEW ..................................................................................................... A-73. CONNECTIONS..................................................................................................... A-8 3.1 CONNECTING VIEW ....................................................................................... A-84. GUIDE TO OPERATION ....................................................................................... A-8 4.1 INSTALLATIONS ............................................................................................. A-85. GENERAL DESCRIPTION .................................................................................... A-9 5.1 FEATURE SUMMARY ..................................................................................... A-9 5.2 SYSTEM SET UP ............................................................................................ A-9 5.3 POWER SAVING ............................................................................................. A-96. SPECIFICATION SUMMARY ................................................................................ A-9 6.1 PERFORMANCE ............................................................................................. A-9 6.2 ERROR RATES ............................................................................................... A-10 6.3 AUDIO PERFORMANCE .................................................................................A-10 6.4 GENERAL PERFORMANCE ........................................................................... A-11 6.5 ENVIRONMENTAL CONDITIONS ...................................................................A-11 6.6 PICK UP LASER ..............................................................................................A-117. BEFORE REQUESTING SERVICE....................................................................... A-11 7.1 TROUBLESHOOTING .....................................................................................A-11
ivFEDERAL COMMUNICATIONS COMMISSION (FCC) RADIOFREQUENCY INTERFERENCE STATEMENTClass B Computing DeviceNOTE : This equipment has been tested and found to comply with the limits for a Class Bdigital device, pursuant to part 15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference in a residential installation. Thisequipment generates, uses and can radiate radio frequency energy and , if not installedand used in accordance with the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference will not occur in aparticular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on, theuser is encouraged to try to correct the interference by one or more of the followingmeasures :- - Reorient or relocate the receiving antenna.- - Increase the separation between the equipment and receiver.- - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.- - Consult the dealer or an experienced radio/TV technician for help.FCC WARNING : Changes or modifications not expressly approved by the partyresponsible for compliance could void the user's authority to operate the equipment.For USA (Model SR-8588-B only)IMPORTANT SAFETY NOTICENOTICE(1) You may not reproduce or transcribe any part of this publication without permission.(2) We reserve the right to revise this document at any time without notice.(3) If you have any questions about this document, contact your sales representative.SAFETY NOTICE(1) To prevent fire or electric shock, do not expose this appliance to rain or moisture.(2) To avoid electric shock or damage to the eyes due to laser beam, do not attempt todisassemble the cabinet.
A-1ENGLISHLASER SAFETY INFORMATIONClass 1 LASER ProductThis equipment is certified to comply with DHHS Rule 21 CFR Chapter 1, Subchapter J ineffect as of date of manufacture.Elsewhere, the drive is certified to conform to the requirements of the InternationalElectrotechnical Commission (IEC) 825 and CENELEC EN60825 for Class 1 laserproducts.Class 1 laser products are not considered to be hazardous. To ensure continued productsafety, the following precautions should be heeded. This equipment has the Optical Pickupwhich has the Dual Lasers (DVD & CD).Caution :(1) The use of controls or adjustments or performance of procedures other than thosespecified herein may result in hazardous radiation exposure.(2) The drive is designed to be incorporated into a computer-based system or unit whichhas an enclosing cover. The drive may not be used as a stand-alone unit.(3) Do not open the drive unit; no user adjustments or serviceable parts are inside.CAUTION – LASER RADIATION WHEN OPEN. DO NOT STARE INTO BEAM.VORSICHT – LASERSTRAHLUNG, WENN ABDECKUNG GEÖFFNET, NICHT IN DEN STRAHL BLICKEN.ADVARSEL – LASERSTRÅLING VED ÅBNING, SE IKKE IND I STRÅLEN.ADVARSEL – LASERSTRÅLING NÅR DEKSEL ÅPNES, STIRR IKKE INN I STRÅLEN.VARNING – LASERSTRÅLNING NÄR DENNA DEL ÄR ÖPPNAD, STIRRA EJ IN I STRÅLEN.VARO ! AVATTAESSA OLET ALTTIINA LASERSÄTEILYLLE, ÄLÄ TUIJOTA SÄTEESEEN.CAUTION – INVISIBLE LASER RADIATION WHEN OPEN. DO NOT STARE INTO BEAM OR VIEW DIRECTLY WITH OPTICAL INSTRUMENTS.VORSICHT – UNSICHTBARE LASERSTRAHLUNG, WENN ABDECKUNG GEÖFFNET, NICHT IN DEN STRAHL BLICKEN AUCH NICHT MIT OPTISCHEN INSTRUMENTEN.ADVARSEL – USYNLIG LASERSTRÅLING VED ÅBNING. SE IKKE IND I STRÅLEN–HELLER IKKE MED OPTISKE INSTRUMENTER.ADVARSEL – USYNLIG LASERSTRÅLING NÅR DEKSEL ÅPNES. STIRR IKKE INN I STRÅLEN ELLER SE DIREKTE MED OPTISKE INSTRUMENTER.VARNING – OSYNLIG LASERSTRÅLNING NÄR DENNA DEL ÄR ÖPPNAD. STIRRA EJ IN I STRÅLEN OCH BETRAKTA EJ STRÅLEN MED OPTISKA INSTRUMENT.VARO ! AVATTAESSA OLET ALTTIINA NÄKYMÄTÖNTÄ LASERSÄTEILYLLE. ÄLÄ TUIJOTA SÄTEESEEN ÄLÄKÄ KATSO SITÄ OPTISEN LAITTEEN LÄPI.CLASS 1 LASER PRODUCT LASER KLASSE 1 LUOKAN 1 LASERLAITEKLASS 1 LASER APPARAT EN60825 APPAREIL A LASER DE CLASSE 1• This label is attached to the upper shield at the top of the drive unit.• Dieses Etikett ist auf der oberen Abschirmung oben auf der Laufwerkseinheit angebracht.(For German)• Märkningen återfinns på den översta kåpan överst på drivenheten. (For Swedish)• Denne merkelappen er festet til det øverste dekselet på toppen av spilleren.(For Norwegian)• Denne etiket er sat fast på den øverste skærm på drev-enhedens top. (For Danish)• Tämä etiketti on liimattu voimayksikön yläosan suojalevyyn. (For Finnish)
A-2VAROITUS! Laitteen käyttäminen muulla kuin tässä käyttöohjeessa mainitulla tavalla saattaa altistaa käyttäjän turvallisuusluokan 1 ylittävälle näkymättömälle lasersäteilylle.VARNING! Om apparaten används på annat sätt än i denna bruksanvisning specificerats, kan användaren utsättas för osynlig laserstrålning, som överskrider gränsen för laserklass 1.For FinnishFor Swedishfor DVDLASER SpecificationType: Semiconductor laser InGaAlP / AlGaAsWave Length: 650 ± 10 nmDivergence:θ = 24 ° ~ 32 ° (Typical 28 °)Output Power: 0.30 mWLaser-Daten: (For German)Typ: InGaAlP / AlGaAs-Halbleiter-LaserWellenlänge: 650 ± 10 nmDivergenz:θ = 24 ° ~ 32 ° (Typical 28 °)Ausgangsleistung: 0,30 mWLASER: (For French)Type: Laser semi-conducteur InGaAlP / AlGaAsLongueur d’ondes: 650 ± 10 nmDivergence:θ = 24 ° ~ 32 ° (Typical 28 °)Puissance de sortie: 0,30 mWLaser- specifikationer: (For Swedish)Typ: Laserhalvedare InGaAlP / AlGaAsVåglängd: 650 ± 10 nmDivergens:θ = 24 ° ~ 32 ° (Typical 28 °)Uteffekt: 0,30 mWLASER Spesifikasjon: (For Norwegian)Type: Halvleder laser InGaAlP / AlGaAsBølgelengde: 650 ± 10 nmDivergens:θ = 24 ° ~ 32 ° (Typical 28 °)Utgangseffekt: 0,30 mWLaser Specifikationer: (For Danish)Type: Semiconductor InGaAlP / AlGaAsBølge-længde: 650 ± 10 nmDivergens:θ = 24 ° ~ 32 ° (Typical 28 °)Udgang-effekt: 0,30 mWLASERin tekniset tiedot: (For Finnish)Tyyppi: Laserpuolijohdin InGaAlP / AlGaAsAallon pituus: 650 ± 10 nmHajaantuminen:θ = 24 ° ~ 32 °(Tyypillinen 28 °)Teho: 0,30 mWfor CDLASER SpecificationType:Semiconductor laser InGaAlP / AlGaAsWave Length: 790 ± 15 nmDivergence:θ = 25 ° ~ 39 ° (Typical 32 °)Output Power: 0.23 mWLaser-Daten: (For German)Typ:InGaAlP / AlGaAs-Halbleiter-LaserWellenlänge: 790 ± 15 nmDivergenz:θ = 25 ° ~ 39 ° (Typisch 32 °)Ausgangsleistung: 0,23 mWLASER: (For French)Type:Laser semi-conducteur InGaAlP / AlGaAsLongueur d’ondes: 790 ± 15 nmDivergence:θ = 25 ° ~ 39 ° (Environ 32 °)Puissance de sortie: 0,23 mWLaser- specifikationer: (For Swedish)Typ:Laserhalvedare InGaAlP / AlGaAsVåglängd: 790 ± 15 nmDivergens:θ = 25 ° ~ 39 ° (Typiskt 32 °)Uteffekt: 0,23 mWLASER Spesifikasjon: (For Norwegian)Type:Halvleder laser InGaAlP / AlGaAsBølgelengde: 790 ± 15 nmDivergens:θ = 25 ° ~ 39 ° (Typisk 32 °)Utgangseffekt: 0,23 mWLaser Specifikationer: (For Danish)Type:Semiconductor InGaAlP / AlGaAsBølge-længde: 790 ± 15 nmDivergens:θ = 25 ° ~ 39 ° (Typisk 32 °)Udgang-effekt: 0,23 mWLASERin tekniset tiedot: (For Finnish)Tyyppi:Laserpuolijohdin InGaAlP / AlGaAsAallon pituus: 790 ± 15 nmHajaantuminen:θ = 25 ° ~ 39 °(Tyypillinen 32 °)Teho: 0,23 mW
A-3ENGLISHINTRODUCTIONDVD-ROM is read-only memory using a CD-ROM disc system and an audio compact discsystem as a media package which handles digital data. To enjoy audio CD, please insert theHeadphone plug into the Headphone jack.(Model SR-8588-B only)This drive unit uses DVD-ROM discs which bear the following mark.This drive unit uses CD-ROM discs which bear the following mark.This drive unit uses CD-R discs which bear the following mark (read only).This drive unit uses audio compact discs which bear the following mark.TMCOMPACTCOMPACTRecordableCOMPACTDIGITAL AUDIOor
A-4CHAPTER 1 PRECAUTIONS WHEN OPERATING1.1 PRECAUTIONS WHEN TRANSPORTINGTo avoid damage* Keep the original packing materials for the drive unit.* Before you transport the drive unit, remove the disc from the drive unit and repack the drive unit in its original packing.1.2 INSTALLATION LOCATIONDo not place unit in the following environments.* High-temperature, high-humidity, extreme temperature changes.* Dusty* Excessive vibration/ sudden shock.* Inclined place.* Direct sunlight.1.3 PRECAUTIONS FOR USE* Never push objects of any kind through the Cabinet slots, never spill liquid of any kind on the unit.* Do not place objects on the product.* Do not attempt to service this product yourself.* Do not open or remove covers.* Do not place foreign objects in the disc insertion slot and attempt to operate.* Do not use DVD-ROM drive when vertically installed. (Horizontal installation type only)1.4 PRECAUTIONS FOR OPERATIONTo avoid error* Do not move the drive unit during operation.* Do not operate the unit directly after a sudden increase in temperature.NOTE :A great proportion of problems are usually caused by the following.➀ Dust or Finger-prints on the surface of the disc.➁ Random Electrical Noise.➂ Scratches and Defects on the surface of the disc.1.5 PRECAUTIONS WHEN HANDLING DISCS➀Hold the disc by the edges, do not touchthe surface of the disc.➁To remove dust or fingerprint, use a clean,soft, dry cloth.
A-5ENGLISH➂Do not write on, or paste paper to the surfaceof the disc.Should not paste a large or thick label to theouter back surface (the label side) of the disc,or it generates drive vibration due toimbalance of the disc.➃Do not store the disc in a place wherethe temperature is high.➄Do not use benzine, thinners andcleaners, etc.➅Do not make the center hole larger.➆Do not bend the disc.➇Do not drop the disc, or subject it to shock.ThinnersCleanersBenzine
A-6CHAPTER 2 PARTS AND FUNCTIONS2.1 FRONT VIEW➀ DISC TRAY Accepts a disc.➁ HEAD PHONE JACK (Model SR-8588-B only) Headphone can be connected using a 3.5mm stereo mini plug.➂ VOLUME (Model SR-8588-B only) Adjusts audio output level of Headphone.➃ BUSY INDICATOR Lights when data is being accessed from the disc, or the drive is playing an audio CD.➄ EJECT/LOAD BUTTON Ejects and loads the disc tray.➅ EMERGENCY EJECT HOLE Insert an instrument such as straightened paper clip into this hole to manually eject the tray. (See 4.1)2.2 REAR VIEW➀ INTERFACE CONNECTOR Connects to host computer’s interface connector.➁ DC (IN) CONNECTOR➂ AUDIO OUT CONNECTOR (Analog)➃ JUMPER PINInsert the jumper according to the Master / Slave / CSEL drive.(See the figure in the next page.)➄ DIGITAL AUDIO OUT CONNECTOR➀➁➂ ➃ ➄➅➀➁➂➃➄
A-7ENGLISHCHAPTER 3 CONNECTIONS3.1 CONNECTING VIEWCHAPTER 4 GUIDE TO OPERATION4.1 INSTALLATIONS • Starting the drive.➀Turn on the power supply.➁Press the eject button. The tray is ejectedfrom the drive.➂Place the disc in the tray with the disc’s labelfacing up.➃Press the eject button or press the traylightly as in the following figure.The tray is retracted automatically.➄Loading start.CAUTION:• Do not insert any foreign objects into the disc tray. This could result in amalfunction.• Do not manually force the tray to open.• When the drive is not in use, keep the tray closed to protect against dust and dirt.• Do not press down hard on the tray when loading a disc, since this may resultin damage to or malfunction of the tray.• In case of emergency, eject the tray manuallyIf for some reason the tray will not eject automatically, pressthe eject-bar (for example, insert a straightened paper clipminimum straight length = 45 mm, Diameter = 1 ~ 1.5 mm)into the emergency eject hole to manually eject the tray.(Before proceeding with this emergency step, make surethat the power is switched OFF.)* This figure shows in case ofHorizontal Installation.Min. 45 mmPaper clipJumper PinAudio Out ConnectorDC (IN) ConnectorDC Power ConnectorDigital Audio OutConnectorJumperDrive-Select (Master/Slave/CSEL)Cable select (CSEL)SlaveMasterInterface ConnectorInterface Cable
A-8CHAPTER 5 GENERAL DESCRIPTION5.1 FEATURE SUMMARY➀Embedded ATAPI Interface.➁Automatic Loading with tray.➂Horizontal and Vertical Installation. (Vertical : Vertical installation type only, 12 cm Disc only)➃Audio Playback Capability.➄MS-DOS CD-ROM Extensions Available.➅5 1/4” Half Height Design.5.2 SYSTEM SET UPThe ATAPI Devices are selected by the Address field in the Drive Select Register. Whena single Device is attached to the interface, it shall be set as Device 0. When the ATAPIDevice is attached along with an ATA Mass Storage Device, the ATAPI Device will beset as Device 1 and respond as a Slave.5.3 POWER SAVING➀When the drive waits for a command from the Host for more than two minutes,then the drive enters Power Save Mode. Laser and Spindle motor stop.➁Re-start is automatic when the Host Command is received or eject button ispushed.NOTE :• ATAPI : AT Attachment Packet Interface.• MS-DOS and MS Windows are trademarks or registered trademarks of MicrosoftCorporation.• IBM PC-AT is a registered trademark of International Business MachinesCorporation.CHAPTER 6 SPECIFICATION SUMMARY6.1 PERFORMANCE➀ Disc diameter 12cm, 8cm➁ Disc speed(DVD-ROM CAV mode) *1 9193 r/min(DVD-RAM ZCLV mode) *2 2030 ~ 4774 r/min (2.6 G mode)1375 ~ 3246 r/min (4.7 G mode)(CD CAV mode) 9480 ~ 10000 r/min➂ Data capacity 4.7 GBytes (DVD-ROM Single Layer)8.5 GBytes (DVD-ROM Dual Layer)4.7 GBytes (DVD-RAM)2.6 GBytes (DVD-RAM)540 MBytes [ typical ] (12 cm CD Disc)180 MBytes [ typical ] (8 cm CD Disc)➃ Data transfer RateSequential (DVD-ROM CAV mode) 8960 ~ 21640 KBytes/sSequential (DVD-RAM ZCLV mode) 11.08 Mbits/s (2.6 G)22.16 Mbits/s (4.7 G)Sequential (CD CAV mode) 3103 ~ 7200 KBytes/s (Mode 1)From buffer 16.67 MBytes/s (PIO Mode 4 without IORDY)16.67 MBytes/s (Multi-word DMA Mode 2)33.3 MBytes/s (Ultra DMA Mode 2)
A-9ENGLISH➄ Access timeRandom access time (DVD CAV mode) *3 105 ms [ typical ]Fullstroke access time (DVD CAV mode) *4 210 ms [ typical ]Random access time (CD CAV mode) *5 90 ms [ typical ]Fullstroke access time (CD CAV mode) *6 180 ms [ typical ]➅ Buffer Size 256 KBytesMTBF 125,000 POH (duty 20%)NOTE:*1 CAV : Constant Angular Velocity*2 ZCLV: Zone Constant Linear Velocity*3 Random access time (DVD) :Average Data read over the complete area fromstarting data recorded area(LBA:0) to maximam datarecorded area(LBA:23197F), more than 2000 timesincluding latency and layered error correction time.*4 Fullstroke access time (DVD) : From starting data recorded area (LBA:0) tomaximam data recorded area (LBA:23197F)including latency and layered errorcorrection time.*5 Random access time (CD) : Average Data read over the complete area from00 min. 02 sec. 00 block to 59 min. 58 sec.74 blocks, more than 2000 times includinglatency and layered error correction time.*6 Fullstroke access time (CD) :From 00 min. 02 sec. 00 block to 59 min. 58 sec.74 blocks including latency and layered errorcorrection time.6.2 ERROR RATES• Soft read errors Less than 10 -9• Hard read errors Less than 10 -126.3 AUDIO PERFORMANCE(1) Analog audio➀ Number of channels 2➁ Frequency response 100 Hz ~ 20 kHz (Headphone)20 Hz ~ 20 kHz (Line-out)➂ SN Ratio More than 80 dB (Headphone/ Line-out)➃ Distortion• Line-out Less than 0.1 % (1 kHz)• Headphone Less than 0.2 % (1 kHz)➄ Output level 0.60 Vrms [ typical ] (Headphone/ Line-out)(2) Digital audio➀ Output level 3.3V CMOS level➁ Data format Base a decision on IEC-958
A-106.4 GENERAL PERFORMANCE➀ Power rating +5 V 1.0 A+12 V 2.0 A➁ Dimensions (W x H x D) 146 x 41.3 x 190 mm(exclude Front Bezel)➂ Weight 843 g [ typical ]6.5 ENVIRONMENTAL CONDITIONSOperating• Temperature 5 ~ 50 °C• Humidity 5 ~ 90 %RH(Max. wet bulb temp. is 29 °C, Non-condensation)Non-operating• Temperature – 30 ~ 65 °C• Humidity 5 ~ 90 %Rh(Non-condensation)6.6 PICK UP LASER➀ for DVD• Type Semiconductor laser InGaAlP / AlGaAs• Wave Length 650 ± 10 nm• Divergenceθ = 24 ° ~ 32 ° (Typical 28 °)• Output power 0.30 mW➁ for CD• Type Semiconductor laser InGaAlP / AlGaAs• Wave Length 790 ± 15 nm• Divergenceθ = 25 ° ~ 39 ° (Typical 32 °)• Output power 0.23 mWCHAPTER 7 BEFORE REQUESTING SERVICE(1) There are many kinds of problems caused by misuse. When a problem occurs,check the table below which describes possible problems occurring with yourDVD-ROM drive.(2) If the DVD-ROM drive is not operating correctly and you cannot restore operationby following the detailed procedures in the table below, do not remove the cover ofthe units or adjust further.(3) In the case of (2) above, unplug the unit and consult with your dealer or the nearestservice station. TROUBLE• DVD-ROM drive does notoperate and Busy Indicatordoes not light.CORRECTION➀Confirm that the connection between the DVD-ROMdrive and the host computer is correct.➁Confirm that the program is correct.➂Confirm that the setting drive select switch is correct.➃Confirm that the disc has been inserted label side up.➄Confirm that foreign objects have not been inserted.7.1 TROUBLESHOOTING
Weight and dimensions shown are approximate.Specifications are subject to change without notice.

Navigation menu