Panasonic Mobile Communications Development of USA 22A001A GSM PCS Handset w/ Bluetooth User Manual X700 OI

Panasonic Mobile Communications Development Corporation of USA GSM PCS Handset w/ Bluetooth X700 OI

operation instrujctions Part II

101From Settings application:1. Open Settings.2. Scroll to Security and open.3. Scroll to Certif. management and open.4. Scroll to an authority certificate, press Options and select Trust settings.5. For each application, select Yes to enable the certificate to verify software, servers, or browser sites. Select No to disable the certificate from verifying software, servers, or browser sites. CALL DIVERTDivert incoming calls (voice, data) to another number. Network dependent service.Check status of Call DivertFrom Settings application:1. Open Settings.2. Scroll to Call divert and open.3. Press Options and select Check status. Network will send current status message. Activate Call DivertFrom Settings application:1. Open Settings.2. Scroll to Call divert and open.3. Select one or more: All voice calls, If busy, If not answered, If out of reach, If not available, All fax calls or All data calls.4. Press Options and select Activate. 5. Select whether calls shall be diverted To voice mailbox or To other number.6. Enter the phone number and press OK.• Press Find to go to your Contacts to select a number.7. Network will send confirmation message. To cancel call diverts, press Options and select Cancel or Cancel all diverts.Note: Before you change any trust settings, be sure that you trust the certificate owner and have verified that the certificate belongs to the listed owner.Note: If either If not answered or If not available is selected in step 3, then after step 6, select a Delay time from the list before calls will be diverted.X700_OI.book Page 101 Wednesday, September 1, 2004 6:47 PM
102 CALL BARRINGCall barring restricts certain types of incoming and/or outgoing calls, using a password furnished by your wireless service provider. Network dependent service.Check Status of Call BarringFrom Settings application:1. Open Settings.2. Scroll to Call barring and open.3. Press Options and select Check status. Network will send current status message. Activate Call BarringFrom Settings application:1. Open Settings.2. Scroll to Call barring and open.3. Select Outgoing calls, International calls, International calls except to home ctry., Incoming calls, or Incoming calls when abroad.4. Press Options and select Activate. 5. Enter Barring password and press OK.6. Network will send confirmation message. To cancel call barrings, press Options and select Cancel or Cancel all barrings.To change the call barrings password, press Options and select Edit barrings passw.. Enter the password furnished by your wireless service provider. Enter, then verify the new password.NETWORK SETTINGSWhen you are not in your home country or region, you may be able to use a network which you are not directly subscribed to. This is called roaming.Select a NetworkFrom Settings application:1. Open Settings.2. Scroll to Network and open.3. Set Operator selection to Automatic to have the phone automatically select a network when roaming. Set Operator selection to Manual to select a network yourself from the list, which are networks available in your current area that have a roaming agreement with your home network.Note: Local laws may not permit roaming in your home region.X700_OI.book Page 102 Wednesday, September 1, 2004 6:47 PM
103• Using a Micro Cellular NetworkWhen the phone is using a micro cellular network (MCN), it can display a MCN indicator in standby mode. Set Cell info display to On to switch on this indicator if you enter an MCN.ENHANCEMENT SETTINGSWhen you attach a headset or Bluetooth headset enhancement to the phone, you can set the ringtone (General, Silent, Meeting, Outdoor, Pager) that the phone will use when the enhancement is attached.See Ringtones on page 90 to learn about ringtones.From Settings application:1. Open Settings.2. Scroll to Enhancement and open.3. Scroll to Headset or BT Accessory and open.4. Select the Default profile settings (Active profile, General, Silent, Meeting, Outdoor, or Pager).5. Set Automatic answer to On if you want the phone to automatically answer calls when the enhancement is attached.• Enhancement in useSelect which enhancement is attached to the phone.From Settings application:1. Open Settings.2. Scroll to Enhancement and open.3. Open Enhancement in use and select Headset or BT Accessory. BT Accessory will display when it is detected by the phone. CLOCKChoose a digital or analogue clock to appear in standby mode. Set alarm clock and alarm tone to remind you of events. If the phone is off when alarm time is reached, the phone switches on and the alarm tone sounds.SET TIME AND DATEFrom Settings application:1. Open Clock.2. Press Options and select Settings.3. Scroll to the desired setting and open; or press Options and select Change: Time Either type in numbers or scroll to enter time. Scroll to move among fields.X700_OI.book Page 103 Wednesday, September 1, 2004 6:47 PM
104 SET ALARMSFrom Settings application:1. Open Clock.2. Press Options and select Set alarm.3. Enter alarm time by either typing in numbers or scroll . Scroll to move among fields. Press OK.If an alarm is already set, you can reset or remove the alarm by pressing Options and selecting Reset alarm or Remove alarm.When the Alarm RingsWhen alarm time occurs; the alarm tone rings, the backlight flashes, and a message displays.To turn off alarm, press Stop. To quiet the alarm indicators for 5 minutes, press Snooze or any key. • If the phone is switched off, the phone temporarily switches on and the other alarm indicators take place. • If you press Snooze, the phone automatically switches off for 5 minutes, then the alarm rings again (maximum 5 times). Date Enter date using same method as time entryDate format Select format where mm = month, dd = date, yyyy = yearDate separator Choose from symbols [ . : / - ]Time format Choose 12-hour or 24-hourTime separator Choose symbols : or . Clock type Choose Analogue or DigitalClock alarm tone To choose a tone, scroll through list of ringing tones. To hear the tone, highlight the tone name and wait. To stop the tone, press any key. To select a tone, highlight the tone name and press Select.Auto time update Select On to update time from the network. Available only if net-work supported.GMT offset If Auto time update is not available, select a time zone, which is offset to GMT time (for example, +05:00 or -05:00). Daylight-saving Select On to add an offset of +01:00 to the current GMT time.Note:GMT offset and Daylight-saving settings are available only if Auto time update is set to Off.X700_OI.book Page 104 Wednesday, September 1, 2004 6:47 PM
105• If you press Stop, you are asked if you wish to switch the phone on.The alarm is deleted when you press Stop. If you wish to have an alarm for the next day, you have to set the alarm again.SPEED DIALSet phone to quickly dial frequently called numbers by pressing 2 keys.ASSIGN A SPEED DIAL NUMBERFrom Settings application:1. Open SpeedDial.2. A grid showing numbers 1 through 9 appears.• If a digit is replaced by an icon, then the corresponding key has been reserved by your wireless service provider to dial a special number, for example, to dial the voice mailbox number.3. Scroll to a number, press Options and select Assign.4. Scroll to the desired Contacts card and press Select. 5. Scroll to the desired number and press Select.CALL A SPEED DIAL NUMBERTo call a preset speed dial number, choose a method:• From standby mode, press the corresponding number key - and press .• From the Speed dial menu, scroll to desired number and press , or press Options and select Call.CHANGE, REMOVE, OR VIEW SPEED DIAL NUMBERSFrom Settings application:1. Open SpeedDial.2. Scroll to desired number on grid.3. Press Options and select Change, Remove, or View number.Caution: Do not press Yes to switch phone on when you are in an aircraft, near sensitive medical equipment, at a refuelling point or when it may cause interference or danger.X700_OI.book Page 105 Wednesday, September 1, 2004 6:47 PM
106 VOICE COMMANDSPress and hold , say “Voice Dial”, then say a name in your Contacts list and the phone will dial the number. Press and hold , then say “open Messages” or “open Camera” and your phone will go directly to the application. START VOICE COMMANDS1. Press and hold . •or from Settings application, open Voice.2. You will hear the prompt to “Say a command”.3. Say one of the choices listed on the phone that you wish to use: Voice Dial, Name Lookup or Open (application).VOICE DIALDial by NameTo dial by saying the name of the person you wish to call, 1. Press and hold . 2. After the prompt to “Say a command”, say “Voice Dial”.3. After the prompt to “Say the name or number”, say the full name of a person in your Contact list, including first name and last name.4. The name is repeated, and the phone will begin dialling.• If the name has more than one number in the Contact entry, say the title of the desired number.Dial by NumberTo dial by saying the phone number, 1. After the prompt to “Say the name or number”, say the digits of the phone number you wish to dial, without pausing between digits.2. If the phone recognises the number, it is repeated and the phone will begin dialling.If the phone is not sure of the number, it displays a list of choices and prompts “did you say...?” and states the first choice.• If the number is correct, say “Yes”. If the number is not correct, say “No” to hear the next possible match, or scroll and select the correct number on the list.NAME LOOKUPLook up the Contact information for a person in your Contact list, without automatically dialling the phone number.1. Press and hold . 2. After the prompt to “Say a command”, say “Name Lookup”.X700_OI.book Page 106 Wednesday, September 1, 2004 6:47 PM
1073. After the prompt to “Say the name”, say the full name of a person in your Contact list, including first name and last name.4. The Contact entry appears on the screen.OPEN APPLICATIONOpen an application by saying “Open”, then say the name of the desired application.1. Press and hold . 2. After the prompt to “Say a command”, say “Open”, then say the name of the application, for example, “Messages”.3. The application opens.See Voice Commands Settings to choose applications to open.VOICE COMMANDS SETTINGS1. Press and hold . 2. After the prompt to “Say a command”, press Settings and select from:Digit Dialling If the phone cannot consistently recognise numbers that you are saying, select Adapt Digits to make recordings to teach the sys-tem your voice. Select Reset Digits to restore the original rec-ognition software.Sensitivity If the phone cannot recognise most of your commands, change sensitivity toward Reject Less. If the phone recognises too many mismatches, change sensitivity toward Reject More.Select Commands or Names. Then scroll up or down to change the setting.Choice Lists Choose whether the phone presents choices when the phone does not recognise your command.Sound Switch on or off the playback of prompts, names and digits. Select Name Settings to change the speed or volume of name playback.Language Choose from the list of languages that the software will use for audio prompts, text screens, and your voice recognition.Application LauncherCheck to select applications from the list to open using Open Applications.Contacts Update Each time Voice Commands is opened, it checks your Contacts list for name additions or edits, and if so, automatically reloads the list. If the list is large, the reload requires more time. Select Configure to choose Automatic or Manual reloading. About Copyright information about the voice recognition software.X700_OI.book Page 107 Wednesday, September 1, 2004 6:47 PM
108 PRINT BOY SETUPPrintBoy Setup works with your QuickOffice menu to print your QuickOffice documents wirelessly from your phone to supported printers.From Settings menu:1. Open PB Setup.2. On the Drvrs tab is a list of supported printer drivers. Scroll to desired printer.3. Press Options and select Configure. Select from: 4. After the printer is configured, scroll , press Options and select: ABOUTView copyright information about the phone and software used on the phone.From Settings application:1. Open About.Communications Select the method to send data to the printer.Paper Size Choose a paper size.Left Margin Choose desired left margin measurement.Test Print Send a test print.Bluetooth > Select Find Printer to pair with the printer.Set as Default From the Drvrs tab, set the highlighted printer as default.X700_OI.book Page 108 Wednesday, September 1, 2004 6:47 PM
109TOOLSTools allows you to take care of a variety of tasks in one place. Use the Calculator to make quick calculations. Use the Converter to convert currencies and measurements. Jot down quick notes on the Notepad. Record short voice clips using Recorder. See your files in one place using File Mgr and manage data stored on the miniSD Card. Install Java™ MIDlet (Mobile Information Device) applications using App Mgr.Tools menu contains these main options: CALCULATORPerform simple mathematic calculations using the calculator.From Tools application:1. Open Calculator.2. A virtual calculator displays. Type in first number of calculation, which appears in field near bottom of screen. • To enter a decimal, press .• To erase digits, press .• To change number to positive or negative, scroll to positive/negative button and select.3. Scroll or to move box to desired mathematic action, press to select.4. Enter the next number. To get result, scroll to equal button and select.• To view the last result, press Options and select Last result.The left side of the screen serves as a “tape” to record your calculations. Use the double up and double down arrow buttons on the screen to scroll up and down the “tape.”To save a number in calculator memory, select the MS (Memory Save) button. To recall the number, select the MR (Memory Recall) button.Calculator Converter NotepadRecorder miniSD To-doApp Mgr File Mgr PhotoLightSIM Tool Kit (optional)Shortcut: To automatically add, subtract, multiply, or divide, enter first number. Press until you reach desired numeric operation, stop pressing , and the operation is inserted.X700_OI.book Page 109 Wednesday, September 1, 2004 6:47 PM
110 CONVERTERConvert a variety of measurements such as world currencies, area, length, volume, temperature, power, and velocity.Set the Base CurrencyFrom Tools application:1. Open Converter.2. If the Type field is not set to Currency, open and change to Currency.3. Press Options and select Currency rates. A list of world currencies (3 letter currency codes) appears with the base currency (if set) noted at the top of the screen.• Most commonly used codes are listed first. They are USD = U.S. dollar; EUR = European Union euro, GBP = British pound sterling, JPY = Japanese yen.4. Scroll to the desired currency code you wish to set as the base, press Options and select Set as base curr..• Any rates entered earlier are reset to zero.5. Scroll to desired currency codes and type in currency exchange rates, based on your newly set base currency = 1.• To enter a decimal, press .6. Press Done.7. Continue with step 3 in Convert Measurements on page 110.Convert MeasurementsFrom Tools application:1. Open Converter.2. Open the Type field, scroll to desired measurement type and press OK.3. Scroll to first Unit field, press Options and select Select unit.• If converting Currency, press Options and select Change currency.4. Scroll to the desired unit to convert FROM, and press OK.5. Scroll to second Unit field, press Options and select Select unit. • If converting Currency, press Options and select Change currency.6. Scroll to the desired unit to convert TO, and press OK.7. Scroll to the first Amount field, press to erase zero. Type in desired unit amount to convert. • To enter a decimal, press .Note: To edit the currency rates, press Options and select Currency rates.X700_OI.book Page 110 Wednesday, September 1, 2004 6:47 PM
111• To enter + and - (for temperature) and E (exponent) symbols, press .Converted amount automatically displays in second Amount field.NOTEPADJot down quick notes into the notepad. Open and edit simple text documents (.txt) saved from text attachments sent using messaging. From Tools application:1. Open Notepad.2. Press Options and select New note. To send a note:From Tools application:1. Open Notepad.2. Press Options and select Send > Via text message, Via multimedia, Via e-mail, Via Bluetooth or Via infrared. 3. To complete text messages, see page 42; or multimedia messages on page 42; or E-mail messages on page 44; or Bluetooth on page 82; or Infrared on page 84.RECORDERRecord voice memos up to 1 minute in length. You can also record a two-way phone conversation. Recorded sound clips are stored in .amr format.Record a Sound ClipFrom Tools application:1. Open Recorder.2. Press Options and select Record sound clip.3. Begin speaking into microphone. Press Stop to stop recording.• Seconds counter bar near bottom of screen and Length counter both keep track of seconds elapsed.4. To rename the sound clip to find it in the list, press Options and select Rename sound clip.Play Back a Sound ClipIf sound clip was just recorded, go to step 4. Or from Tools application:1. Open Recorder.2. Press Options and select Go to Gallery.3. Open desired folder, then scroll to desired sound clip and open.Note: You can also convert amounts in reverse. Type in amount in second field, converted amount automatically displays in first field.X700_OI.book Page 111 Wednesday, September 1, 2004 6:47 PM
112 4. Select on screen Play button.• Volume control - Scroll to adjust volume. Note speaker icon and volume steps in upper part of screen.• To select buttons on screen, scroll or to move box to button and press : To play a sound clip during a call, open the sound clip from its current location and play. The other person hears the sound clip.Record a Conversation1. During a phone conversation, press and follow steps 1 to 3 in Record a Sound Clip on page 111.2. The conversation records.3. Press Stop to stop recording.Send a Sound ClipIf sound clip was just recorded, go to step 4. Or, from Tools application:1. Open Recorder.2. Press Options and select Go to Gallery.3. Open desired folder, then scroll to desired sound clip.4. Press Options and select Send > Via multimedia, Via e-mail, Via Bluetooth or Via infrared.5. To complete multimedia messages, see page 42; or E-mail messages on page 44; or Bluetooth on page 82; or Infrared on page 84.Recorder SettingsFrom Tools application:1. Open Recorder.2. Press Options and select Settings. Scroll to: Play: Pause: Rewind:Stop: Fast forward: Record:Caution: You are responsible for the security of a recorded message. Ask for the other party’s consent before recording, and abide by local voice recording laws.Memory in use Store recordings in Phone memory or miniSD CardDefault speaker Choose Loudspeaker or HandsetX700_OI.book Page 112 Wednesday, September 1, 2004 6:47 PM
113Use Recording as a Ringing ToneTo use a recording as a ringing tone, record a sound clip as described in Record a Sound Clip on page 111.The new sound clip automatically appears in the Ringing tone lists in the Ringtones, Contacts, Clock, and Calendar alarm applications. See Ringtones on page 90; Assign a Ringing Tone on page 33; and Set Alarms on page 104 to assign ringing tones.miniSD CARD (MEMORY CARD)Backup your phone memory onto the miniSD memory card. MiniSD Cards can be installed into the standard size memory card socket of other devices using the miniSD Card adapter (see Using miniSD Card and miniSD Adapter on page 114). Data file size of miniSD Card may vary with current availability. Remove miniSD Card1. Press , scroll to Eject miniSD Card and press OK. Wait for file saving or copying process to finish before removing miniSD Card.2. Continue with Removing miniSD Card on page 10.Format, View Details of miniSD CardBackup FilesFrom Tools application:1. Open miniSD. A list indicating name, storage capacity, storage used, and storage free displays.2. Press Options and select: Warning: Do not format a miniSD Card that contains important software as this destroys all data on the miniSD Card.Remove miniSD Card Saves data and closes applications before ejecting miniSD CardBackup phone mem. Backup the phone contents to the miniSD CardX700_OI.book Page 113 Wednesday, September 1, 2004 6:47 PM
114 Password in some miniSD CardsSome brands of miniSD Cards can be locked from unapproved use by entering a password. If you insert a miniSD Card with locking capability into your phone, the following option items will appear.From Tools application:1. Open miniSD. 2. Press Options and select:Using miniSD Card and miniSD AdapterBy inserting the miniSD Card into the miniSD adapter, you can use the miniSD Card in an SD memory card compatible personal computer. Back up data and print images using a printer.To insert the miniSD Card into the miniSD adapter:1. On miniSD adapter, move lock tab into unlocked position.2. Slide miniSD Card in with notched corner entering the left side of the miniSD adapter first into the pocket until it clicks.3. Follow manufacturer’s instructions for inserting an SD card in the compatible personal computer and accessing the data.Restore from card Restore earlier backed up miniSD Card data to the phone mem-oryFormat miniSD Card Format other brand miniSD Cards if needed before first useminiSD Card name Write a name or title for the miniSD CardMemory details View number of bytes stored in separate applications such as Calendar, Messages, documents. Also view total memory in use and free memory.Set password Enter a password to use to lock the miniSD Card. Thereafter, the password must be entered to use the miniSD Card in any device.Remove password Removing the password unlocks the miniSD Card, and it can be used in another device without a password.Change password Change locking password for this miniSD Card.Unlock miniSD Enter the password to unlock the miniSD Card.X700_OI.book Page 114 Wednesday, September 1, 2004 6:47 PM
115WRITE-PROTECT miniSD CARD• To protect important data, move write-protect switch to Lock position. The miniSD Card is write-protected and you cannot write, save, or delete data or format the card.• To write data to the miniSD Card, move write-protect switch to unlocked position.TO-DO LISTMake a list of tasks, and set a deadline and priority for each.Create a New To-do TaskFrom Tools application:1. Open To-Do.2. Press Options and select New to-do note.3. Enter information in fields:4. Press Done to save.Edit and Mark To-do TasksFrom Tools application:1. Open To-Do.2. Scroll to the desired task.• To edit, open task and edit information in fields as desired. • To mark the task as completed or to restore task, press Options and select Mark as done, or Mark as not done.Subject Description of task or subjectDue date Assign a due datePriority Open and select High, Normal or Low.Note: In the list of tasks, ! icon means High priority task; - icon means Low priority task.Note: A checkmark within a box means task is completed. A blank box means task is unfinished.X700_OI.book Page 115 Wednesday, September 1, 2004 6:47 PM
116 APPLICATION MANAGERThe Application Manager allows you to install and manage both Java™ MIDlet (Mobile Information Device) applications and device software installation files. Examples include games, secure information storage, and compression software. You can also view and manage Authority and Personal certificates (see Certificate Management on page 100).View Details of ApplicationFrom Tools application:1. Open App Mgr.2. Scroll to desired application installation file.• Files with extension .sis are device software installation files. Files with extensions .jad or .jar are Java™ applications.3. Press Options and select View details.• A list displays with details such as name, version, type, certificate and signature details, trust status for MIDlets, application size, application supplier.View CertificateFrom Tools application:1. Open App Mgr.2. Scroll to desired application installation file.3. Press Options and select View certificate.• A list displays with details such as issuer, subject, validity period, serial number, and fingerprint.See Certificate Management on page 100.Install Application or SoftwareYour phone supports installation of software and applications suitable for the Symbian™ operating system. Because these files are usually large and compressed, be sure to reserve enough time and phone memory for the entire installation procedure.From Tools application:1. Open App Mgr.2. Scroll to desired application installation file.3. Press Options and select Install.If there is no digital signature or certificate attached to the software or application, the phone issues warnings of the risks of installing without verifying the source. You should only install software or applications from sources that you have personally verified and of which you are absolutely sure.Note: Panasonic is not responsible for the performance of downloaded content or possible corruption of phone software.X700_OI.book Page 116 Wednesday, September 1, 2004 6:47 PM
117You will see messages asking if you wish to continue or cancel during different phases of the installation process.If the installation process is cancelled for some reason, such as the phone runs out of memory, then the installation is not complete, or partial. To complete the partial installation, either delete the partially installed application, or reinstall the application.If there are problems with installation, you can view the installation log or send the installation log to a help desk for troubleshooting. Press Options and select View log or Send log.Remove Application or SoftwareFrom Tools application:1. Open App Mgr.2. Scroll to desired application installation file.3. Press Options and select Remove.FILE MANAGEROrganise and manage files stored in the phone memory and on the miniSD Card. It’s an easy way to find files and folders.View Folders and FilesFrom Tools application:1. Open File Mgr.2. A list of folders and files stored in the phone memory appears. Some folders may have sub folders, for example, Images folder has two sub folders - Picture msgs. and Wallpapers. Files that have not been stored in a folder are listed after the folder names.• Scroll to view folders and files stored on the miniSD Card.3. Scroll to desired folder or file and open.Find Folders and FilesType letters or keywords in a search box to find a folder or file.From Tools application:1. Open File Mgr.2. Press Options and select Find.3. Choose to look in the phone memory or miniSD Card.Note: Removing a software application may cause you to not be able to view documents created with that software, and other software may not work if it relies on the removed software.X700_OI.book Page 117 Wednesday, September 1, 2004 6:47 PM
118 4. Type in the keyword to find, or just type in a few letters, and press Find.5. After a brief period of searching, a list of files and folders containing the keyword displays.6. The list is sorted from closest match first to farthest match last. Folders and files with the same name appear with folder before file.Manage Folders and FilesFrom Tools application:1. Open File Mgr.2. Press Options and select:Send FilesFrom Tools application:1. Open File Mgr.2. Open desired folder, then open file.3. Press Options and select Send > Via multimedia, Via e-mail, Via Bluetooth, or Via infrared.Open Open the selected folder or file.Delete Delete the selected folder or file.Move to folder Move selected item to another folder.Copy to folder Copy selected item to another folder, leaving the original in its current place.New folder Create a new folder.Mark/Unmark Mark or unmark several files at once. Not available for folders.Rename Change name of item. Default folders cannot be renamed.Receive via infrared To receive a file via Infrared, see page 84.View details View name, format type, date and time modified, size in bytes or kilobytes (if item is a folder, size is total of all files and folders inside the folder), whether it is a default folder, amount of sub folders, and amount of files.Memory details View number of bytes stored in separate applications such as Calendar or Messages. Also view total memory in use and free memory. View phone memory on phone memory tab, or scroll for miniSD Card memory.X700_OI.book Page 118 Wednesday, September 1, 2004 6:47 PM
1194. To complete multimedia messages, see page 42; or e-mail messages on page 44; or Bluetooth on page 82; or Infrared on page 84.PHOTOLIGHTLight up your subject before snapping a picture or recording a video clip. To turn on the Photolight,1. From standby mode, press and hold .2. Open Camera and continue with Take a Picture on page 58. To record a video clip, continue with Record a Video Clip on page 71.To switch off Photolight, return to standby mode, then press and hold .Or, you can switch on or off Photolight from Tools application:1. Open Photolight.Unlike a camera flash, the Photolight does not flash. Photolight remains on until you switch it off. Use Photolight as a FlashlightThe Photolight can be switched on to use as a small flashlight.1. In standby mode, press and hold . The Photolight switches on.To switch off the Photolight, return to standby mode, then press and hold .• Whether or not you close the flip, the Photolight remains on until you switch it off. • The Photolight also switches off when the phone is switched off. Note: The phone may not allow you to copy, modify, transfer or forward some copyrighted images, ringtones or other content.Send is not available if a folder or playlist is highlighted.Note: Do not use the Photolight near the eyes. The Photolight is intended as an auxiliary light source for shooting photos in dim areas. It does not produce the intense light of a typical camera flash.Battery note: Keeping Photolight switched on consumes battery power more rapidly. To conserve battery power, switch off Photolight when not in use.X700_OI.book Page 119 Wednesday, September 1, 2004 6:47 PM
120 SIM TOOL KITThe SIM Tool Kit allows applications existing on the SIM card to interact and operate with your phone. These applications, stored in the SIM memory, are Value Added Services. Your network operator can configure your SIM card with applications that can be seen on your phone as additional menu items. Contact your network operator for further information. X700_OI.book Page 120 Wednesday, September 1, 2004 6:47 PM
121CALL LOGSCheck your recent missed calls, received calls, and dialled numbers. View the amount of data sent and received via GPRS. View details for each incoming and outgoing communication event such as voice calls, text messages, and GPRS connections.These features are SIM card dependent.MISSED CALLS, RECEIVED CALLS, AND DIALLED NUMBERSWhen you miss an incoming call, a missed call icon and a note displays on the standby screen. Press Show to view the details of the missed call.From Call Logs application:1. Open Recent calls.2. Open Missed calls, Received calls, or Dialled nos.. 3. List of last 20 calls appears with caller or dialled phone number (or name if entered in Contacts), date and time of call. Also, scroll or to view lists.To clear all Recent calls lists (Missed calls, Received calls, and Dialled nos.) at once, open Recent calls, then press Options and select Clear recent calls.Call or Add to ContactsMake a call using a number from the recent calls lists, or add the number to your Contacts list.From Call Logs application:1. Open Recent calls.2. Locate desired number in Missed calls, Received calls, or Dialled nos., and highlight.3. Press Options and select:Shortcut: To view the Dialled nos. list from the standby screen, press .Call Dial the number.Create message > Select Via text message or Via multimedia to create a new message addressed to the number.Use number Use the number as a base to edit for dialling a similar number.Delete Delete highlighted number.Clear list Erase all numbers from selected list.Add to Contacts >Create new Contacts card or Update existing card using the number.X700_OI.book Page 121 Wednesday, September 1, 2004 6:47 PM
122 CALL DURATIONCheck duration of last call and accumulated duration of dialled calls, received calls, and all calls. From Call Logs application:1. Open Call duration.2. Scroll to view duration of Last call, Dialled nos., Received calls, and All calls (since last counter reset).• Times indicated in hours:minutes:seconds.To clear all Call duration lists (Last calls, Dialled nos., Received calls and All calls) at once, press Options and select Clear timers.To separate Call duration lists into summaries for each of both lines, Line 1, or Line 2, press Options and select Filter timers.GPRS DATA COUNTERView the amount of data in kilobytes sent and received by the phone via GPRS data packets, for example, WAP pages, e-mail messages, downloaded ringtones and applications.From Call Logs application:1. Open GPRS counter.2. All sent data and All receiv. data amounts display in kilobytes.To clear the GPRS counter, press Options and select Clear counters. Enter the phone lock code and press OK. See Security Settings on page 98.CALL LOGS SETTINGSFrom Call Logs application:1. Press Options and select Settings. 2. Scroll to select:Note: Actual times invoiced from your wireless service provider for calls and services may vary from the call timers depending on number of network features purchased, when billing begins and ends, billing rounding off, etc.Log duration Choose from No log, 1 day, 10 days, or 30 days to store call information in the logs.Show call duration Select Yes to switch on a time elapsed counter to display during a call.X700_OI.book Page 122 Wednesday, September 1, 2004 6:47 PM
123GENERAL CALL LOGSView details for each incoming and outgoing communication event such as voice calls, text messages, and GPRS connections.From Call Logs application:1. Scroll to General Logs tab .2. A list of communication events displays. Up arrow icon indicates outgoing or sent; down arrow icon indicates incoming or received events.3. Press Options and select:View details Scroll to desired event to view details such as direction (in/out), type (voice, data, etc.), duration (for calls).Clear log Clear all events from the log.Filter Separate events into a list by type such as Outgoing, Incoming, Voice calls, Data calls.Add to Contacts > Scroll to desired event to Create new Contacts card or Update existing card using number or address.X700_OI.book Page 123 Wednesday, September 1, 2004 6:47 PM
124 QUICKOFFICEStore your Microsoft® Word, Excel, and PowerPoint® documents on your phone. Edit them right on the phone, then beam or send the new documents to another device, or save them to the miniSD Card.VIEW DOCUMENTSFrom Quickoffice application:1. Scroll to Quickword, Quicksheet, or Quickpoint documents tabs.2. A list of documents in phone memory appears.3. Press Options and select: VIEW MICROSOFT® WORD DOCUMENTSDocuments open in read-only full screen view. You must press Options and select Edit mode to make edits to a document.Scroll to move one line at a time or scroll to move one page at a time.Go to shortcuts (percentage through the document): Press for 20%, for 30%, etc., to go to beginning.Note: For customer support and more information on Quickoffice, visit www.quickoffice.com.Open Open highlighted file.New Create a new document.Browse Select the memory to browse. Open folders as needed to view documents.File management > Sort files to sort by name, size, date or ext., or Scan location to Scan default, Scan mail, or Scan all.Refresh Refresh the list view.Properties View details of highlighted file.Send as Send file Via multimedia, Via e-mail, Via Bluetooth, Via infrared.Delete Delete highlighted file.About product View copyright information about the software.EULA View software license agreement.Note: You can also view and move your documents from File Manager (see page 117).X700_OI.book Page 124 Wednesday, September 1, 2004 6:47 PM
125Press Options and select: EDIT MICROSOFT® WORD DOCUMENTS1. From an open document, press Options and select Edit mode.2. Save the document with a new file name.3. Scroll through the document using: -- move down one line -- move up one line -- move left one space -- move right one spaceTo highlight text to apply a format, press and hold , then scroll or . The text will highlight. For more text editing options, see Entering Text on page 23.Press Options and select: Edit mode Go to Edit mode.Search > Choose Find, Find Next or Replace. Enter text to be located in Find field. In other fields, scroll to choose a search range. Then press Find. Goto > To go to desired place in the document, choose Top, Percent, or Bottom.Zoom > Zoom out, Zoom 100%, or Zoom in document by desired amount.Autoscroll Automatically scroll document line by line. Scroll to increase speed, scroll to decrease speed.Print Print document by sending it via Multimedia, Bluetooth or infrared.View mode Go to View mode.Font Choose a font name and size to apply to highlighted text.Style > Choose bold, italic, or underline to apply to highlighted text.Alignment > Choose left, centre, or right alignment to apply to highlighted text.Color Choose a colour to apply to highlighted text.Bullet Apply bullet to highlighted text.Search > Choose Find, Find Next or Replace. Enter text to be located in Find field. In other fields, scroll to choose a search range. Then press Find. Print Print document by sending it via Multimedia, Bluetooth or infrared.Note: Tables, pictures or embedded objects in Microsoft® Word documents cannot be displayed on the phone.X700_OI.book Page 125 Wednesday, September 1, 2004 6:47 PM
126 VIEW MICROSOFT® EXCEL DOCUMENTSDocuments open in read-only full screen view.Scroll through the document using: -- move down one cell -- move up one cell -- move left one cell -- move right one cell -- toggle between view mode and edit modePress Options and select: EDIT MICROSOFT® EXCEL DOCUMENTSDocuments open in read-only full screen view. -- toggle between view mode and edit modeIn edit mode: -- move cursor left within a cell -- move cursor right within a cellTo select cells, press and hold , then scroll , , or .Press Options and select: Edit Cell Edit highlighted cell.Worksheets > Select, insert, rename or delete worksheets.Toggle Full Screen Toggle between full screen and reduced screen.Zoom > Choose a size to zoom document.Freeze > Freeze Row, Column or Both for the highlighted cell.Adjust Column Width Scroll to adjust column width.Clipboard > Choose Cut, Copy, Paste or Select All to apply to highlighted cells.Search > Choose Find, Find Next or Replace. Enter text to be located in Find field. In other fields, scroll to choose a search range. Then press Find. Properties Set cursor movement after entry and toggle auto-recalculations.Print Print document by sending it via Multimedia, Bluetooth or infrared.Accept Text Edit Enter the edit.Revert Text Edit Revert to previous cell content.Operators > Choose from list of math operators and commonly used symbols.Functions > Choose from list of spreadsheet functions.Range Select Select a range of cells by highlighting.X700_OI.book Page 126 Wednesday, September 1, 2004 6:47 PM
127VIEW MICROSOFT® POWERPOINT® DOCUMENTSDocuments open in outline view.Scroll to move between outline, notes, slide, and thumbnail views.Navigation Shortcuts Formatting > Choose from list of formatting.Alignment > Choose Default, Left, Center or Right to apply to highlighted cells.Font > Apply Bold or Underline font style.Color > Apply colour to font or cell.Style > Choose from list of text and number styles.Clipboard > Choose Undo, Cut, Copy, Paste or Select All to apply to highlighted cells.Clear > Clears highlighted cell formatting, formula content, or both.Print Print document by sending it via Multimedia, Bluetooth or infrared.Note: Macros, pictures, graphs or embedded objects in Microsoft® Excel documents cannot be displayed on the phone.View Action KeypressOutline, Notes, SlideToggle between full screen and partial screenSlide view full screenZoom outZoom inFit to screenOutline, Notes, SlidePrevious slideNext slide or or Thumb(4 slides per page)Page upPage downNext slidePrevious slideOutline Collapse slideExpand slideCollapse allExpand allEdit slideX700_OI.book Page 127 Wednesday, September 1, 2004 6:47 PM
128 Options MenuThe Options menu varies in an open PowerPoint® document, depending on which of the 4 views you are using. Press Options and select: Toggle Screen Toggle screen in outline, notes, and slide view.Edit > In outline view, you can edit the entry, insert and delete slides. In notes view, you can edit the entry.Outline > In outline view, expand and collapse one or all slides.Navigate > In all views, move to next or previous page or slide.Goto > Go to another view.Pitch > Start or stop pitch device.Print In outline or notes view, print document by sending it via Multi-media, Bluetooth or infrared.Exit > In thumb view, choose Close and save, Close and save as, or Close and discard.Note: Animation, multimedia, or embedded objects in Microsoft® PowerPoint® documents cannot be displayed on the phone.X700_OI.book Page 128 Wednesday, September 1, 2004 6:47 PM
129GAMESYour phone is supplied with two games, MicroGolf and Balloon-Headed Boy. Download GamesSee Download Files from the Internet on page 76. For customer support of downloaded content, visit the respective supplier’s website. Free content is available for your X700 phone. For downloading information, visit www.panasonicbox.com. Availability of this service is dependent on your country/region or network. The downloaded content is free, however there will be a communication fee to download.MICROGOLF GAMEPlay 18 holes of a miniature golf game.From Games application:1. Open MicroGolf icon.2. Navigation options: Note: For customer support and more information on MicroGolf and Balloon-Headed Boy games, visit the forum at www.morpheme.co.uk.Note: Panasonic is not responsible for the performance of downloaded content or possible corruption of phone software.Rotate clockwise: Scroll or press . Rotate counterclockwise:Scroll or press .Snap direction to the diagonal:Press , , , or .Increase power: Press or . Release to hit the ball.Toggle golfer on or off: Press .Toggle manual scroll to see further than ball centered view allows:Press . Scroll for 4 directions to move the view. Switch sound on or off: See Options menu.X700_OI.book Page 129 Wednesday, September 1, 2004 6:47 PM
130 BALLOON-HEADED BOY GAMEMove Balloon-Headed Boy through different levels to rescue balloons to bring to the birthday party. Watch out for the frogs!From Games application:1. Open Balloon-Headed Boy icon.2. The game may show hints of which key to press to move.3. Navigation options: Move right: Scroll or press . Move left: Scroll or press .Move up: Scroll or press .Move down: Scroll or press .Go back one screen: Press . Switch sound on or off: Press when at title screen below speaker icon.X700_OI.book Page 130 Wednesday, September 1, 2004 6:47 PM
131FAVOURITESFavourites serves as a “bulletin board” storing shortcuts to your frequently used applications or documents stored in phone memory or miniSD Card.OPEN A FAVOURITES SHORTCUTOpen Favourites application:1. Scroll to the desired shortcut; press Options and select Open. Or, press to open.ADD A SHORTCUT TO FAVOURITES1. Open the item within the application or open the document in which you want to store a shortcut in Favourites.2. Press Options and select Add to favourites.• Adding to Favourites is available only for certain applications. MANAGE FAVOURITESOpen Favourites application:1. Scroll to the desired shortcut.2. Press Options and select: To change the wallpaper of the Favourites screen, see Change Wallpaper or Screensaver on page 92.Edit shortcut name Change the name of the shortcut.Shortcut icon When this option appears, choose a different icon picture by scrolling through grid.Move A checkmark appears on the shortcut icon. Scroll or to move to desired location, press OK.List view/Grid view View the shortcuts in a list view or grid view.Delete shortcut Remove shortcut from Favourites.Note: The default shortcuts to Today in Calendar, Inbox in Messages, and Notepad cannot be deleted, nor can the icon be changed.X700_OI.book Page 131 Wednesday, September 1, 2004 6:47 PM
132 ACCESSORIESMany accessories are available for your Panasonic phone. Contact your wireless service provider to purchase Genuine Panasonic accessories. Using non-Panasonic accessories or accessories not recommended by your wireless service provider may result in poor performance of your phone, or even cause an electrical hazard.BATTERY LITHIUM-ION 780 mAh(EB-BSX700)Carry a spare battery.TRAVEL CHARGER(EB-CAX70AU) (EB-CAX70CN) (EB-CAX70EU)(EB-CAX70UK) (EB-CAX70US)Recharge the battery using any electrical outlet. Plugs for use in many countries are available.miniSD CARDMiniSD (secure data) memory card stores sound, video, picture, and voice files. Card memory size varies.miniSD CARD ADAPTERThis adapter allows you to use your miniSD Card in a standard SD socket. See miniSD Card (MEMORY CARD) on page 113.CAR CHARGER (DC ADAPTER)(EB-CDX70)Recharge the battery using your vehicle’s cigarette lighter socket.CAR HOLDER(EB-KAX700)Mounted in your vehicle to store your phone. Use with personal handsfree headset for handsfree operation.Warning: When you use a miniSD Card with an SD Memory Card applicationdevice, please insert the card in the miniSD adapter which is included inthe package. When you use the card with an SD Memory Cardapplication device, please insert and remove the card with the adapterat the same time and never leave the adapter in the device.X700_OI.book Page 132 Wednesday, September 1, 2004 6:47 PM
133CARRY CASE(EB-YKX700)Clip your case to your clothing or purse to keep your phone close.PERSONAL HANDSFREE HEADSET(EB-EMD87)Plug into your phone and talk without holding the phone to your ear. PRODUCT CDTransfer data between your phone and your PC, using Bluetooth, Infrared, or USB data cable. USB DATA CABLE WITH CHARGING CAPABILITY(EB-UCX700)Use this to connect your phone to a PC to transfer data between them. Use in conjunction with the software provided on the CD-ROM.BLUETOOTH® HEADSET(EB-BHX70)Talk handsfree and without wires. Place the headset on your ear and the phone in your pocket, with no wires connecting the two. BLUETOOTH® CAR KITParrot model CK3000 or Parrot model DriveBlueMade by Parrot, these Bluetooth enabled handsfree car kits allow you to use your phone handsfree in your car. Model CK3000 requires installation, model DriveBlue plugs into your car cigarette lighter.How to identify a genuine Panasonic accessoryPanasonic produces some of the most advanced mobile phones available. So, as you’d expect from this class leader, the range of accessories are second to none. Most genuine Panasonic accessories will have a label showing an “EB-XXXXX” model number.X700_OI.book Page 133 Wednesday, September 1, 2004 6:47 PM
134 SPECIFICATIONSSize -Length x width x thickness: 96 mm x 49 mm x 24 mm-Weight: 110 gNetwork bands supported -Standard: GSM900 Class 4 GSM1800 Class 1 GSM1900 Class 1-Data bearer: GPRS Class 10; CSDBattery -Standard: 780 mAh Lithium Ion-Talk time: 2 to 5 hours-Standby time: 60 to 175 hours-Charging time: approximately 90 to 120 minutesDisplays -Main display: 176 x 208 pixels TFT LCD; 65k colours-External display: 64 x 96 pixels CSTN LCD; 56k coloursCamera -Type: VGA CMOS-Photolight: Range 1-2 m-Video: H.263 Encode and Decode; MPEG4 Decode; 3GPP OMA compliant streaming-Other features: “Superbright” Photolight; up to 4X Zoom; Frames; CropConnectivity -Bluetooth: Serial port, Dial-up networking, Object push, File transfer, Headset, and Handsfree profiles (v1.1)-Infrared: SIR (slow infrared)-USB: v1.1Note: Talk and Standby time are dependent upon network conditions, battery condition, and use of certain features such as data calls, games, Bluetooth, camera.Charging time is dependent on usage and battery conditions.X700_OI.book Page 134 Wednesday, September 1, 2004 6:47 PM
135Software features -Operating System: Symbian v7.0s, Series 60 v2.0-Browser: WAP 2.0 (WML, XHTML MP, WCSS, cHTML, other)-Java: MIDP2.0, CLDC1.0, JSR 82, 118, 120, 135-Digital Rights Management security: Forward lock DRM + additional content protection-Messaging: MMS 2.0, SMS, Smart messaging-E-mail: SMTP, IMAP4, POP3, MIME2-Personal Information Management: Contacts; Calendar; Scheduler; Clocks (NITZ [Network Informed Time Zone], analog, digital); Alarm; Calculator; Converter-SyncML: v1.1.1, Device Management and Data Synchronisation- OMA Client Provisioning-Document Viewer: view/edit native Microsoft® Word, Excel, and PowerPoint® documents-Image Editing: Crop, slide show, panorama, frames-Predictive text: Tegic T9 predictive text input-Voice Recognition: Speaker independent name, continuous digit dial, command and controlContent and file formats supported -Still Imaging: JPEG, TIFF, WMF, GIF, BMP, WBMP, PNG, EXIF, MBM, SMS OTA, ICO-Video playback: 3GPP, MPEG4, RealVideo7 and RealVideo8-Video record: 3GPP-Audio: RealAudio Voice, RealAudio7, and RealAudio8, AMR-NB, AMR-WB, WAV, WVE, MIDI, GSM 6.10, RAW, RMF, XMF, SMAF.Bluetooth audio devices are limited to voice calls-Tex t: Text/plain-Ringtones: 40+ polyphonic, OTA ringtones-Application installation package: Symbian .sis file-Java: JAD and JAR files-Digital certificates: Yes - can download-vCard: Send/receive business cards (Contacts cards)-vCalendar: Send/receive calendar eventX700_OI.book Page 135 Wednesday, September 1, 2004 6:47 PM
136 TROUBLESHOOTINGPROBLEMSProblem RemedyPhone does not switch on • Check that the battery is properly installed and charged.• Press and hold for at least two seconds.Short battery life for a new batteryBattery life is reduced when:• playing games• leaving Bluetooth switched on• taking pictures with Camera• recording video clips with Video recorder• recording sound clips with Recorder• using the Photolight often• browsing the Internet• downloading data• leaving Cell Broadcast switched on• phone is in a weak service area, requiring more battery powerBattery charging indicator does not appear, and phone cannot be switched on when starting battery charge sessionAllow phone to charge for a few minutes before switching on. Battery may have been fully discharged.Battery fails to charge Do not connect the Travel Charger until after the battery has been installed.Display looks faded Check the Brightness setting (see Display Settings on page 93).Emergency calls cannot be madeCheck that the antenna symbol is displayed - move to a coverage area and operate your phone when the antenna symbol appears. Calls cannot be made or received• Check to make sure the phone is switched on.• If keypad is locked, press Unlock softkey, then press .• If phone is locked, enter lock code.• Check that the network signal strength indicator displays at least one bar. Move to a stronger coverage area.• If no network name appears, the phone may not be registered to a network. Move to another area and watch for the phone to register to a network.• Check Call barring, Fixed dialling, Closed user group, and Call divert settings in Settings application.X700_OI.book Page 136 Wednesday, September 1, 2004 6:47 PM
137 Error MessagesThese are some of the important error messages which may be displayed.Note: The quality of display images may vary depending on the object or environment.Display images may distort when shooting moving objects, especially in a fast moving environment. Error Message MeaningUnable to install.Unable to install game, ringing tone, application, etc., for various reasons such as not enough memory, or downloading failed.No access points defined. Define now?You need to set up an access point for your phone to access the service you are requesting, such as Multimedia messaging, e-mail, or browsing the Internet.Memory full. Phone memory is full. Delete some files before new files can be stored. See Shared Phone Memory on page 28.No network coverage There is no network service in your current location.Network busyConnection errorNetwork is overloaded with calls or there was an error trying to connect to the network.Unable to send message. Maximum message size is xxx.File size of object attached to message is too large to send. The xxx will be replaced by a file size. You may be able to send the file by infrared, Bluetooth, or transfer by PC Software Suite.Unable to connect. No network coverage. Cannot connect to server you are requesting.Secure connection not available Network cannot establish a secure connection.SIM card registration failed The network cannot register your SIM card. Contact your wireless service provider.PIN code blocked. Enter PUK code:PIN code was entered incorrectly 3 times, therefore the SIM card is locked. Enter the PUK code, supplied by wireless service provider.PIN2 code blocked. Enter PUK2 code:PIN2 code was entered incorrectly 3 times, therefore the SIM card is locked. Enter the PUK2 code, supplied by wireless service provider.SIM card rejected The phone is set to accept only certain SIM cards. It will not accept the currently inserted SIM card.X700_OI.book Page 137 Wednesday, September 1, 2004 6:47 PM
138 COPYRIGHTS © 2004 Panasonic Mobile Communications Co., Ltd. All rights reserved.Information in this document is subject to change without notice. No part of these instructions may be reproduced or transmitted in any form or by any means without obtaining express permission from Panasonic Mobile Communications Co., Ltd.CP8 Patent(CE marking)Copyright © Arcsoft 2004. All rights reserved.Powered by Mascot Capsule®Engine Micro3D Edition Mascot Capsule® is a registered trademark of HI Corporation.Panasonic X700 with Bluetooth® TechnologyThe Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Panasonic is under license. Other trademarks and trade names are those of their respective owners.miniSD™ Memory Card Java and all Java based trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the U.S. and other countries This Product Includes Software Licensed from Symbian Ltd. © 1998-2004; this product is based on Symbian OS.This software is based in part of the work of the FreeType Team. This product is covered by one or more of the following patents: United States Patent 5,155,805, United States Patent 5,325,479, United States Patent 5,159,668, United Kingdom Patent 2232861 and France Patent 90 05712. T9® Text Input is licensed under one or more of the following: U.S. Pat. Nos. 5,818,437, 5,953,541, 5,187,480, 5,945,928, and 6,011,554; Australian Pat. No. 727539; Canadian No. 1,331,057; United Kingdom Pat. No. 2238414B; Hong Kong Standard Pat. No. HK0940329; Republic of Singapore Pat. No. 51383; Euro. Pat. No. 0 842 463 (96927260.8) DE/DK, FI, FR, IT, NL, PT.ES, SE, GB; Republic of Korea Pat. Nos. KR201211B1 and KR226206B1; and additional patents are pending worldwide. X700_OI.book Page 138 Wednesday, September 1, 2004 6:47 PM
139MicroGolf is Copyright © 2004 Morpheme Limited. All rights reserved.Balloon-Headed Boy is Copyright © 2004 Morpheme Limited. All rights reserved.PC Suite Synchronisation includes synchronisation software. © 1996 - 2004 Time Information Services Limited. All rights reserved.VoiceSignal TechnologiesThis product contains software licensed from Nokia Corporation. Copyright © 2004 Nokia Corporation. All rights reserved. This product is licensed under the MPEG-4 patent portfolio license for the personal and non-commercial use of a consumer to (i) encode video in compliance with the MPEG-4 Visual Standard (“MPEG-4 Video”) and/or (ii) decode MPEG-4 Video that was encoded by a consumer engaged in a personal and non-commercial activity and/or was obtained from a licensed video provider.No license is granted or implied for any other use.Additional information may be obtained from ‘MPEG LA, LLC’ TMX700_OI.book Page 139 Wednesday, September 1, 2004 6:47 PM
140 © 2003-2004 Mobility Electronics, Inc.IMPORTANT-READ CAREFULLY:MOBILITY TEXAS, INC. ("LICENSOR") IS WILLING TO LICENSE THIS SOFTWARE TO YOU ONLY IF YOU ACCEPT ALL THE TERMS OF THIS END USER LICENSE AGREEMENT ("EULA"). PLEASE READ THE TERMS CAREFULLY BEFORE YOU INSTALL THIS SOFWARE BECAUSE BY EXERCISING YOUR RIGHTS TO USE THE SOFTWARE, YOU ARE AGREEING TO BE BOUND BY THE TERMS OF THIS EULA. IF YOU DO NOT AGREE TO THESE TERMS, LICENSOR WILL NOT LICENSE THIS SOFTWARE TO YOU, AND IN THAT CASE YOU SHOULD REMOVE ALL FILES FROM YOUR PHONE, HANDHELD DEVICE, AND/OR PERSONAL COMPUTER.Ownership of the Software This Quickoffice™ software program and other software product(s) included ("Software") and the accompanying written materials, including all intellectual property and confidential information relating to it, are owned or licensed by Licensor and are protected by United States copyright laws, by laws of other nations, and by international treaties.Grant Of License Licensor grants to you the non-exclusive right to use one copy of the Software on a single computer or handheld device ("Device"). You may load one copy into storage memory of one Device and may use that copy, only on that same Device.Restrictions on Use and Transfer If this Software package contains multiple media types, then you may use only the type of media appropriate for your Device. You may not use the other size media on another Device or computer, or loan, rent, transfer, or assign them to another user except as part of the permanent transfer of the Software and all written materials (as provided for below). You may not copy the Software, except that (1) you may make one copy solely for backup or archival purposes, and (2) you may transfer the Software to a single hard disk provided you keep the original solely for backup or archival purposes. You may not copy the written materials. You may permanently transfer the Software and accompanying written materials (including the most recent update and all prior versions) if you retain no copies and the transferee agrees to be bound by the terms of this EULA. Such a transfer terminates your license. You may not rent, lease, allow multiple users, time sharing, use the Software in a service bureau or otherwise transfer or assign the right to use the Software, or any adaptation or part thereof, except as stated in this paragraph. You may not reverse engineer, decompile, or disassemble the Software.Limited Warranty, Disclaimer, and Damages LimitationLicensor warrants that the Software will perform substantially in accordance with the accompanying written materials for a period of 30 days from your purchase date of the Software. LICENSOR DISCLAIMS ALL OTHER WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT, WITH RESPECT TO THE SOFTWARE AND THE ACCOMPANYING WRITTEN MATERIALS. LICENSOR DOES NOT WARRANT ERROR-FREE OR UNINTERRUPTED USE OF THE SOFTWARE. This limited warranty gives you specific legal rights. You may have others, which vary from one state, country, or region to another. Some laws prohibit the foregoing limitations, so they may not apply to you. LICENSOR'S ENTIRE LIABILITY AND YOUR EXCLUSIVE REMEDY FOR SOFTWARE THAT DOES NOT MEET THIS LIMITED WARRANTY SHALL BE, AT LICENSOR'S CHOICE, EITHER TO (A) REFUND THE PRICE PAID OR (B) REPLACE THE SOFTWARE IF RETURNED TO LICENSOR WITH A COPY OF YOUR RECEIPT. Any replacement Software will be warranted for the remainder of the original warranty period or 30 days, whichever is longer. This Limited Warranty is void if failure of the Software has resulted from modification, accident, abuse, or misapplication. IN NO EVENT WILL LICENSOR BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY LOSS OF PROFITS, LOST SAVINGS, OR OTHER INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT OF YOUR USE OR INABILITY TO USE THE SOFTWARE. Because some states, countries, or regions do not allow the exclusion or limitation of liability for consequential or incidental damages, the above limitation may not apply to you. This EULA is governed by the laws of the State of Texas, and may be enforced by Mobility's licensors, including without limitation, Schema Software, Inc. If you have any questions concerning this EULA or wish to contact Licensor for any reason, please write: Mobility Texas, Inc. 5508 W. Plano Parkway, Suite E, Plano, TX 75220; email: support@quickoffice.com, www.quickoffice.com phone: 1 + 214-956-9806 (English only).U.S. Government Restricted Rights. The Software and documentation are provided with Restricted Rights. Use, duplication, or disclosure by the Government is subject to restrictions set forth in subparagraph (c)(1) of The Rights in Technical Data and Computer Software clause at DFARS 252.227-7013 or subparagraphs (c)(1)(ii) and (2) of Commercial Computer Software - Restricted Rights at 48 CFR 52.227-19, as applicable. Supplier is Mobility Texas, Inc. 5508 W. Plano Parkway, Suite E, Plano, TX 75093; phone: 1 + 214-956-9806. X700_OI.book Page 140 Wednesday, September 1, 2004 6:47 PM
141INDEXAAbout (copyrights) 108Access point settings 95Accessories 132Active clamshell 95Alarm setCalendar 36Clock 104Application manager 116ApplicationsClose 27Menu map 29Navigating 25Open 27Options softkey 26BBarring 102BatteryCharging 9Installing 8Removing 8Bluetooth 80Browser 73–78Bookmarks 76Connect to Internet 74Download files from Internet 76Online options 75Saved pages 78Set up 74Settings 77CCalculator 109Calendar 36–39Alarm set 36Chinese Lunar calendar 39Create new 36Send events 39Settings 38Views 37CallAnswer by opening flip 95Answering 18Duration 122Ending 22Handsfree talking 20Hold or unhold 19Making 16Mute or unmute 20Open applications during 21Options 19Volume 20Call barring 102Call divert 101Call logs 121Call settings 94Call waiting 20CallsDialled 121Emergency 18Missed 121Multi-party (conference) 21Received 121Camera 58–61PhotoLight 119Picture quality 60Save pictures 59Send pictures 60Take a picture 58View pictures 60Cell broadcast messages 56Certificate management 100Chinese Lunar calendar 39Clip art, add to photos 68Clock 103Close applications 27Closed user group 99Conference calls 21Connection manager 85Connection settings 95Connectivity 73–89Bluetooth 80Connection manager 85Device manager 87Infrared 83Operator 78Synchronisation 85Contacts 30–35Create new 30Edit 32Find 31Groups 34Make a call 31My numbers 31Send a Contacts card 34Service numbers 34SIM directory 30Converter 110X700_OI.book Page 141 Wednesday, September 1, 2004 6:47 PM
142 Copyrights 138Create e-mail messages 44Create multimedia messages 42Create text message 42DData callAccess points 95Definition 73Device manager 87Dictionary 23EEject miniSD Card 10, 12E-mail messages 48Emergency calls 18Ending calls 22Enhancement settings 103FFavourites 131File manager 117Fixed dialling 99Flashlight 119Frames, add to photos 68GGallery 62–66Add clip art, frames 68Edit photos 67Play video, sound clips, and streaming media 63Player controls 64Send pictures, video, sound clips 64Slide show 67View images 62Zoom 63Games 129GPRSAccess points 95Definition 73GPRS data counter 122Groups in Contacts 34HHandsfree talking 20IIcons (indicators) 14Inbox 45Infrared 83International calling 18Internet. See BrowserKKey functions 12Keys, lock 12LLanguageBrowser page display 77Cell broadcast 56Phone 93Writing 93Lock code 98Lock keys 12Lock phone 98Loudspeaker 20MMaking a call 31Mark 26Media 62–72Gallery 62PhotoBase 66RealOne Player 69Video recorder 71Memory details 28Menu map 29Messages 40–57Cell broadcast 56Create new e-mail 44Create new multimedia 42Create new text 42Create presentation 43Drafts 51E-mail (Mailbox) 48Inbox 45My folders 47Outbox 53Receive new 45Reports 54Sent 52Service command 57Settings 54SIM 56Types 40miniSD CardApplication 113Installing 10Removing 10, 12Missed calls 121Moving in the applications 25Multi-party calls 21Multitasking 27My numbers 31X700_OI.book Page 142 Wednesday, September 1, 2004 6:47 PM
143NNavigating in the applications 25Network settings 102Notepad 111OOn or off, switch phone 16Open applications 27Operator menu 78Options softkey 26Outbox 53Overview, phone 11PPhoneMemory 28Overview 11Settings 93Switch on or off 16PhotoBase 66PhotoLight 119Photos, edit 67Picture quality 60Picture, take 58PIN code 98PIN2 code 98Play video, sound clips, and streamingmedia 63Problems 136QQuickoffice 124RRealOne Player 69Recorder, voice 111Ringtones 90SSearch 28Security settings 98Send Calendar events 39Send Contacts card 34Send data via Bluetooth 82Send data via infrared 84Send DTMF touch tones 20Send pictures 60, 64Send sound clips 64Send video clips 64Service numbers 34Settings 93–103Access point 95Alarm 104Barring 102Call 94Call divert 101Certificate management 100Clock 103Connection 95Enhancement 103Network 102Phone 93Security 98Speed dial 105SIM cardInstalling 7Removing 8SIM directory 30Sound clips, play 63Sound controls 64Specifications 134Speed dial 105Standby mode displays 15Streaming media, play 63SyncML 85TTabs 25Take a picture 58Text entryDictionary for predictive text entry 23General text entry 23Themes 91To-do 115Tools 109–120Troubleshooting 136UUnmark 26USB 84, 133VVideo clips, play 63Video player controls 64Video recorder 71Voice commands 106Voice dial 106Voice mail 40Voice recorder 111VolumeCall 20Player 64Ringtone 90Sound clip 64Video clip 64X700_OI.book Page 143 Wednesday, September 1, 2004 6:47 PM
144 WWallpaper, change 92ZZoomCamera 58Gallery 63Video recorder 71X700_OI.book Page 144 Wednesday, September 1, 2004 6:47 PM

Navigation menu