Panasonic Mobile Communications Development of USA 26C001A GSM Cellular Mobile Radio User Manual VS3 VF AAA

Download:
Mirror Download [FCC.gov]
Document ID	551460
Application ID	oaVE+ZfL2O0WpoMV/9CI4Q==
Document Description	User Manual Part 1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	278.06kB (3475713 bits)
Date Submitted	2005-06-15 00:00:00
Date Available	2005-06-15 00:00:00
Creation Date	2005-06-14 10:17:26
Producing Software	Acrobat Distiller 6.0.1 (Windows)
Document Lastmod	2005-06-14 10:17:45
Document Title	VS3_VF_AAA.book
Document Creator	PScript5.dll Version 5.2.2
Document Author:	shinsei

X800_Safety first_1213.fm
Page 1
Monday, December 13, 2004
4:34 PM
Safety first
Your new phone is a convenient and effective communications tool, but it can be
hazardous when used improperly. To avoid harming yourself or anyone else, please
review the following information before using your phone.
Batteries
Batteries can cause property damage, injury, or burns if the terminals are touched with a
conductive material (for example, metal jewellery, keys, and so on). Therefore, use
caution when handling a charged battery. Additional precautions and notes are listed
below:
• Never throw a battery into a fire; it may explode.
• Fully recharge the battery if the battery is low or as soon as the low-battery alert beeps.
• Do not drop the battery.
• Do not allow bridging of battery contacts with metallic objects.
• Do not remove the battery from the phone while the phone is powered on. Settings you
have changed may revert to their previous settings.
A recyclable lithium ion/polymer battery powers your phone. Please call
1-800-8-BATTERY for information on how to recycle the battery.
Charging devices
Use only Genuine Panasonic charging accessories. Use of attachments not recommended
by Panasonic or your Service Provider may result in fire, electrical shock, or injury.
Panasonic is not responsible for damage caused by using non-Panasonic accessories.
• Do not expose charging adapters to moisture, water, or the weather.
• Do not use an adapter with a damaged cord.
• When using a DC adapter in an automobile, a small amount of electricity flows
through the adapter, even if the phone is turned off. Remove the plug from the
cigarette lighter whenever the phone will be left in the vehicle for long periods of time.
• Always charge the battery in a well ventilated area, not in direct sunlight, between
41°F (5°C) and 95°F (35°C). It is not possible to recharge the battery if it is outside
this temperature range.
• Do not incinerate or dispose of the battery as ordinary trash. The battery must be
disposed of in accordance with local legislation and may be recycled.
Caution: The cigarette lighter must have a 12V negative ground socket. Do not use the
adapter in a vehicle that has a positive ground system.
General
• Do not use the phone in extreme temperature or humidity. The specified operating
temperature range is -22°F to +140°F (-30°C to +60°C).
• Extreme temperatures may have a temporary effect on the operation of your phone.
This is normal and does not indicate a fault.
• Do not expose the phone (particularly the display) to direct sunlight for extended
periods of time or to a humid, dusty or hot area.
• Do not attempt to disassemble the phone. There are no user-serviceable parts inside.
X800_Safety first_1213.fm
Page 2
Monday, December 13, 2004
4:34 PM
• Do not subject the equipment to excessive vibration or shock.
• Do not expose the phone to rain or spill liquids on it. If the equipment becomes wet
immediately remove the battery and charging device and contact your dealer.
• Do not use any accessories other than those designed for use with your phone.
• Use of attachments not recommended or sold by Panasonic or your Service Provider
may result in fire, electrical shock, or injury.
• Panasonic is not responsible for damages caused by using non-Panasonic accessories.
• Pressing any of the keys may produce a loud tone. Avoid holding the phone close to
the ear while pressing the keys.
• Keep metallic items that may accidentally touch the battery terminals away from the
equipment. Battery damage may occur.
• When disposing of any packing materials or old equipment check with your local
authorities for information on recycling.
• If connecting the phone to an external source, read the operating instructions of the
equipment for the correct connection and safety precautions.
• If connecting the phone to an external source, verify that the phone is compatible with
the product to which you are connecting it.
Availability of service
This phone, like any wireless phone, operates using radio signals, wireless and landline
networks, and user-programmed functions. Because of this, connection in all conditions
cannot be guaranteed. Therefore, you should never rely solely on any wireless phone for
essential communications (for example, medical emergencies).
Emergency (911) service
If you need to make an emergency (911) call, power the phone on, dial 911, and press D.
Emergency calls can be made regardless of lock setting and with or without a SIM card.
Remember, to make or receive any call, the phone must be switched on and in a service
area that has adequate signal strength. Even if you are within the coverage area of your
Service Provider, you may be in an area with insufficient signal strength to place a 911
call. Emergency calls might not be possible on all wireless phone networks or when
certain network service and/or phone features are in use.
X800_Safety first_1213.fm
Page 3
Monday, December 13, 2004
4:34 PM
Safety tips
Following the suggestions in this section will help ensure safe and efficient operation of
your Panasonic phone.
This Model Phone Meets The Government’s Requirements For Exposure To Radio
Waves.
Your wireless phone is a radio transmitter and receiver. It is designed and manufactured
not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the
Federal Communications Commission of the U.S. Government. These limits are part of
comprehensive guidelines and establish permitted levels of RF energy for the general
population. The guidelines are based on standards that were developed by independent
scientific organizations through periodic and thorough evaluation of scientific studies.
The standards include a substantial safety margin designed to assure the safety of all
persons, regardless of age and health.
The exposure standard for wireless mobile phones employs a unit of measurement known
as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. Tests
for SAR are conducted using standard operating positions specified by the FCC with the
phone transmitting at its highest certified power level in all tested frequency bands.
Although the SAR is determined at the highest certified power level, the actual SAR level
of the phone while operating can be well below the maximum value. This is because the
phone is designed to operate at multiple power levels so as to use only the power required
to reach the network. In general, the closer you are to a wireless base station antenna, the
lower the power output.
Before a phone model is available for sale to the public, it must be tested and certified to
the FCC that it does not exceed the limit established by the government-adopted
requirement for safe exposure. The tests are performed in positions and locations (e.g., at
the ear and worn on the body) as required by the FCC for each model. The highest SAR
value for this model phone when tested for use at the ear is 0.833 W/kg and when worn
on the body, as described in this user guide, is 0.496 W/kg. (Body-worn measurements
differ among phone models, depending upon available accessories and FCC
requirements). While there may be differences between the SAR levels of various phones
and at various positions, they all meet the government requirement for safe exposure.
The FCC has granted an Equipment Authorization for this model phone with all reported
SAR levels evaluated as in compliance with the FCC RF emission guidelines. SAR
information on this model phone is on file with the FCC and can be found under the
Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID
NWJ26C001A.
Additional information on Specific Absorption Rates (SAR) can be found on the Cellular
Telecommunications Industry Association (CTIA) web-site at
http://www.wow-com.com.
Caution: All Panasonic branded accessories are tested and comply with FCC RF
exposure requirements. Non-Panasonic accessories may not comply.
X800_Safety first_1213.fm
Page 4
Monday, December 13, 2004
4:34 PM
Body-worn operation
This device was tested for body-worn operations with the back of the phone kept 1.5 cm.
from the body. To maintain compliance with FCC RF exposure requirements, use only
belt-clips, holsters or similar accessories that maintain a 1.5 cm. separation distance
between the user’s body and the back of the phone. The use of belt-clips, holsters and
similar accessories should not contain metallic components in its assembly. The use of
accessories that do not satisfy these requirements may not comply with FCC RF exposure
requirements, and should be avoided.
Antenna care
This mobile phone incorporates an internal antenna for radio communisation. Do not use
the phone if it is damaged. Unauthorized antennas, modifications, or attachments could
damage the phone and may violate FCC regulations.
Driving
Important: Check the laws and regulations on the use of wireless telephones in the areas
where you drive. Always obey them. Also, if using your phone while driving:
• Give full attention to driving - driving safely is your first responsibility;
• Use handsfree operation, if available;
• Pull off the road and park before making or answering a call if driving conditions so
require.
Electronic devices
Most modern electronic equipment is shielded from RF signals. However, certain
electronic equipment may not be shielded against the RF signals from your wireless
phone.
Pacemakers: The Health Industry Manufacturers Association recommends that a
minimum separation of 6 inches (6”) or 15 centimeters (15 cm) be maintained between a
handheld wireless phone and a pacemaker to avoid potential interference with the
pacemaker. These recommendations are consistent with independent research and
recommendations of Wireless Technology Research.
Persons with pacemakers:
• Should ALWAYS keep the phone more than six inches from their pacemaker when
the phone is turned ON;
• Should not carry the phone in a breast pocket;
• Should use the ear opposite the pacemaker to minimize the potential for interference;
• If you have any reason to suspect that interference is taking place, turn your phone
OFF immediately.
X800_Safety first_1213.fm
Page 5
Monday, December 13, 2004
4:34 PM
Hearing Aids: Some digital wireless phones may interfere with some hearing aids. In the
event of such interference, consult your Service Provider and hearing aid manufacturer.
Other Medical Devices: If you use any other personal medical device, consult the
manufacturer of your device to determine if it is adequately shielded from external RF
energy. Your physician may be able to assist you in obtaining this information.
Turn your phone OFF in health care facilities when any regulations posted in these areas
instruct you to do so. Hospitals or health care facilities may be using equipment that could
be sensitive to external RF energy.
Vehicles: RF signals may affect improperly installed or inadequately shielded electronic
systems in motor vehicles. Check with the manufacturer or its representative regarding
your vehicle. You should also consult the manufacturer of any equipment that has been
added to your vehicle.
Posted Facilities: Turn your phone OFF in any facility where posted notices so require.
Aircraft
FCC regulations prohibit using your phone while in the air; switch off your phone before
boarding an aircraft unless otherwise advised by airline personnel.
Blasting areas
To avoid interfering with blasting operations, turn your phone OFF when in a “blasting
area” or in other areas posted: “Turn off two-way radio.” Obey all signs and instructions.
Potentially explosive atmospheres
Turn your phone OFF when in any area with a potentially explosive atmosphere and obey
all signs and instructions. Sparks in such areas could cause an explosion or fire resulting
in bodily injury or even death.
Areas with a potentially explosive atmosphere are often, but not always, clearly marked.
They include fueling areas such as gas stations; below deck on boats; fuel or chemical
transfer or storage facilities; vehicles using liquefied petroleum gas (such as propane or
butane); areas where the air contains chemicals or particles, such as grain, dust or metal
powders; and any other area where you would normally be advised to turn off your
vehicle engine.
For vehicles equipped with an air bag
An air bag inflates with great force. DO NOT place objects, including both installed or
portable wireless equipment, in the area over the air bag or in the air bag deployment area.
If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious
injury could result.
For U.S. Customers: Vehicles using liquefied petroleum gas (such as propane or butane)
must comply with the National Fire Protection Standard (NFPA-58).
For a copy of this standard, contact:
National Fire Protection Association
One Batterymarch Park
PO Box 9101
Quincy, MA 02269
Phone: 1-800-344-3555
Web site: www.nfpa.org E-mail address: Custserv@NFPA.org
FCC/CE/IC STATEMENTS
DECLARATION OF CONFORMITY WITH FCC RULES FOR
ELECTROMAGNETIC COMPATIBILITY
We, Panasonic Mobile Communications Co., Ltd., declare under our sole
responsibility that the product,
EB-VS3
to which this declaration relates, this device complies with Part 15 of the FCCRules. Operation is subject to the
to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Caution: Exposure to Radio Frequency Radiation.
This device and its antenna must not be co-located or operating in conjunction with any other antenna or
transmitter.
Federal Communications Commission Notice
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection. This equipment generates, uses
and can radiated radio frequency energy and, If not installed and used in accordance with the instructions, may cause
28
FCC/CE/IC STATEMENTS
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Modifications
The FCC requires the user to be notified that any changes or modifications to this device that are not expressly
approved by Panasonic may void the users authority to operate the equipment.
Canada-Industry Canada (IC)
The wireless radio of this device complies with RSS 139 & RSS 210 Industry Canada. This Class B digital complies with
Canadian ICES-003.
Cet appareil numérique de la classe B conforme á la norme NMB-003 du Canada.
Europe-European Union Notice
Radio products with the CE 0560 or CE alert marking comply
with the R&TTE Directive (1995/5/EC) issued by the Commission
of the European Community.
29
TEN (10) DRIVER SAFETY TIPS
Your wireless telephone gives you the powerful ability to communicate by voice-almost anywhere,
anytime. But an important responsibility accompanies the benefits of wireless phones, one that
every user must uphold.
When driving a car, driving is your first responsibility. When using your wireless phone behind the
wheel of a car, practice good common sense and remember the following tips:
1. Get to know your wireless phone and its features such as speed dial and redial. If
available, these features help you to place your call without taking your attention off the
road.
2. When available, use a hands free device. If possible, add an additional layer of
convenience and safety to your wireless phone with one of the many hands free
accessories available today.
3. Position your wireless phone within easy reach. Be able to access your wireless
phone without removing your eyes from the road. If you get an incoming call at an
inconvenient time, if possible, let your voice mail answer it for you.
4. Let the person you are speaking with know you are driving; if necessary,
suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet,
snow, ice, and even heavy traffic can be hazardous.
5. Do not take notes or look up phone numbers while driving. Jotting down a "to do"
list or flipping through your address book takes attention away from your primary
responsibility, driving safely.
6. Dial sensibly and assess the traffic; if possible, place calls when you are not
moving or before pulling into traffic. Try to plan calls when your car will be
stationary. If you need to make a call while moving, dial only a few numbers, check the
road and your mirrors, then continue.
7. Do not engage in stressful or emotional conversations that may be distracting.
Make people you are talking with aware you are driving and suspend conversations
that have the potential to divert your attention from the road.
8. Use your wireless phone to call for help. Dial 9-1-1 or other local emergency number
in the case of fire, traffic accident or medical emergencies. Remember, it is a free call
on your wireless phone!
9. Use your wireless phone to help others in emergencies. If you see an auto
accident, crime in progress or other serious emergency where lives are in danger, call
9-1-1 or other local emergency number, as you would want others to do for you.
10. Call roadside assistance or a special non-emergency wireless assistance
number when necessary. If you see a broken-down vehicle posing no serious hazard,
a broken traffic signal, a minor traffic accident where no one appears injured, or a
vehicle you know to be stolen, call roadside assistance or other special non-emergency
wireless number.
"The wireless industry reminds you to use your phone safely when driving."
For more information, please call 1-888-901-SAFE or
visit www.wow-com.com
Information on this page provided by the Cellular Telecommunications Industry
Association.
Safety First
VS3_VF_AAA.book
Page 1
Monday, May 23, 2005
11:25 AM
Contents
Contents...................................................................1
Camera...................................................................47
Copyright and Legal Information ............................3
Picture................................................................................48
Video ..................................................................................54
Getting Started.........................................................7
Messaging..............................................................59
About this manual .................................................................8
Installing the SIM card and the battery ..................................10
Charging the battery............................................................12
Opening/closing the phone ..................................................13
Switching the phone on/off ..................................................14
Creating a new message......................................................60
Receiving messages ............................................................67
Inbox ..................................................................................68
Archive ...............................................................................71
Vodafone Mail .....................................................................73
Vodafone Messenger ...........................................................73
Voicemail ............................................................................73
Media Album.......................................................................74
Messaging settings..............................................................74
Memory status ....................................................................76
About Your Phone..................................................15
Phone overview...................................................................16
Key functions ......................................................................17
Display ...............................................................................19
Indicator/Illumination Light ...................................................21
Menu navigation..................................................................22
Basics.....................................................................25
Making calls .......................................................................26
Answering calls...................................................................28
Silent mode ........................................................................30
Voicemail............................................................................30
In-call operations.................................................................30
Multiple calls operations ......................................................32
Text entry ...........................................................................34
Contacts .............................................................................38
Vodafone live! ........................................................77
Viewing Vodafone live! .........................................................78
Browser options ..................................................................79
Entertainment ........................................................83
Games & more ....................................................................84
Standby applications............................................................85
Download games.................................................................85
Settings ..............................................................................86
Information .........................................................................86
VS3_VF_AAA.book
Page 2
Monday, May 23, 2005
11:25 AM
Contents
Settings..................................................................87
Additional Information ........................................131
Phone settings ................................................................... 88
Display settings .................................................................. 93
Sounds & alerts.................................................................. 95
Call settings ....................................................................... 96
live!cast settings................................................................. 99
Connectivity ..................................................................... 102
Security ........................................................................... 108
Accessories...................................................................... 132
Changing the X-Changeable CoverTM ................................. 134
Troubleshooting................................................................ 135
Glossary of terms.............................................................. 139
Specifications ................................................................... 141
EU Warranty ..................................................................... 142
Safety considerations ........................................................ 147
Care and maintenance ...................................................... 151
SAR ................................................................................. 152
Declaration of conformity................................................... 154
Tools ....................................................................111
SIM Tool Kit...................................................................... 112
Alarms............................................................................. 112
Sound recorder ................................................................ 114
Calculator ........................................................................ 114
Calendar...............................................................115
Browsing Calendar ........................................................... 116
Creating Calendar events .................................................. 118
Managing Calendar events................................................ 119
My Files................................................................121
Pictures ........................................................................... 122
Sounds ............................................................................ 126
Videos ............................................................................. 128
Games & more ................................................................. 129
Text templates.................................................................. 129
Memory status ................................................................. 130
Index ....................................................................155
VS3_VF_AAA.book
Page 3
Monday, May 23, 2005
11:25 AM
Copyright and Legal Information
© 2005 Panasonic Mobile Communications Co., Ltd. All rights
reserved.
Information in this document is subject to change without
notice. No part of these instructions may be reproduced or
transmitted in any form or by any means without obtaining
written permission from Panasonic Mobile Communications
Co., Ltd.
CP8 Patent
Java and all Java based trademarks and logos
are trademarks or registered trademarks of
Sun Microsystems, Inc. in the U.S. and other
countries.
T9® Text Input is licensed under one or more
of the following: U.S. Pat. Nos. 5,187,480,
5,818,437, 5,945,928, 5,953,541,
6,011,554, 6,286,064, 6,307,548,
6,307,549, and 6,636,162, 6,646,573; Australian Pat. Nos.
727539, 746674, and 747901; Canadian Pat.
Nos.1,331,057, 2,302,595, and 2,227,904; Japan Pat. No.
3532780, 3492981; United Kingdom Pat. No. 2238414B;
Hong Kong Standard Pat. No. HK1010924; Republic of
Singapore Pat. No. 51383, 66959, and 71979; European Pat.
Nos. 0 842 463 (96927260.8), 1 010 057 (98903671.0), 1
018 069 (98950708.2); Republic of Korea Pat. Nos.
KR201211B1 and KR226206B1. People's Republic of China
Pat. Application Nos. 98802801.8, 98809472.X and
96196739.0; Mexico Pat. No. 208141; Russian Federation
Pat. No. 2206118; and additional patents are pending
worldwide.
Copyright © 2003 by Bitstream, Inc. All Rights Reserved.
Bitstream Vera is a trademark of Bitstream, Inc.”
For further information, please refer to:
http://www.w3.org/2003/04/vera/COPYRIGHT.TXT
Powered by Mascot Capsule®/Micro3D EditionTM Mascot
Capsule® is a registered trademark of HI Corporation© 2005
HI Corporation. All Rights Reserved.
VS3_VF_AAA.book
Page 4
Monday, May 23, 2005
11:25 AM
Copyright and Legal Information
Aplix, microJBlend and JBlend, and all Aplix-or
JBlend-related trademarks and logos are
trademarks or registered trademarks of Aplix
Corporation in the U.S., Japan and other
countries.
This product is licensed under the MPEG-4 patent portfolio
license for the personal and non-commercial use of a
consumer to (i) encode video in compliance with the MPEG-4
Visual Standard ("MPEG-4 Video") and/or (ii) decode MPEG-4
Video that was encoded by a consumer engaged in a personal
andnon-commercial activity and/or was obtained from a
licensed video provider. No license is granted or implied for any
other use. Additional information may be obtained from MPEG
LA,LLC.
MPEG Layer-3 audio coding technology licensed from
Fraunhofer IIS and Thomson.
VS3_VF_AAA.book
Page 5
Monday, May 23, 2005
11:25 AM
Copyright and Legal Information
END-USER SOFTWARE LICENSE AGREEMENT
By use of this Panasonic cellular phone, including any embedded
software features or programs ("Embedded Software"), you agree
to the terms and conditions of this End-User Software License
Agreement ("EULA").
1. END-USER RIGHTS: You are granted a limited end-user right to use
the Embedded Software only as part of and together with this
Panasonic cellular phone. You agree to use the Embedded Software
in a manner that complies with all applicable laws, including laws
related to copyright and other intellectual property rights. All other
uses are prohibited.
2. LIMITATIONS ON END-USER RIGHTS:
(a) You may not reproduce, copy, or transfer the Embedded
Software to any other device;
(b) You may not create derivative works of any type based on the
Embedded Software (unless and except as expressly permitted
as part of a feature application);
(c) You may not reverse engineer, reverse compile, disassemble,
or otherwise attempt to discover the source code of the
Embedded Software;
(d) You may not transfer this Panasonic cellular phone other than
to a transferee end-user who undertakes to observe the same
obligations as those set out in this EULA;
(e) You may not remove any proprietary notices, such as copyright,
trademark, or otherwise, from the Embedded Software.
3. INTELLECTUAL PROPERTY RIGHTS: The Embedded Software is
protected by copyright, trademark, patent and/or other intellectual
property rights and is owned by Panasonic Mobile Communications
Co., Ltd. ("PMC") and/or is under license from PMC's licensors.
4. TERMINATION: Your right to use the Embedded Software may be
terminated for failure to comply with any of the terms of this EULA.
5. LIMITATION OF LIABILITY/DISCLAIMER OF WARRANTIES: TO THE
MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT
SHALL PMC, ITS AFFILIATES, AND THEIR LICENSORS BE LIABLE FOR
INCIDENTAL, INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES OR
ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
DATA OR PROFITS, ARISING OUT OF OR IN CONNECTION WITH THE
USE OR PERFORMANCE OF THE EMBEDDED SOFTWARE. EXCEPT
AS EXPRESSLY STATED IN THE RELEVANT WARRANTY CARD, PMC,
ITS AFFILIATES, AND THEIR LICENSORS DISCLAIM ALL
WARRANTIES, EXPRESS AND IMPLIED, INCLUDING, WITHOUT
LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE. THE REMEDIES PROVIDED
TO THE END-USER IN THE RELEVANT WARRANTY CARD ARE
EXCLUSIVE.
VS3_VF_AAA.book
Page 6
Monday, May 23, 2005
11:25 AM
Copyright and Legal Information
6. ADDITIONAL THIRD PARTY TERMS: The Embedded Software may
contain third party software subject to separate third party license
terms and conditions set forth in the user manual or associated
product documentation and/or displayed on the LCD of this
Panasonic cellular phone. You acknowledge and agree that such
third party software is governed by the third party license terms, as
applicable, and that such terms are solely between you and the
applicable licensor.
7. EXPORT REGULATIONS/RESTRICTED RIGHTS: The Embedded
Software is subject to U.S. export control laws, including the U.S.
Export Administration Act and its associated regulations, and may be
subject to export or import regulations in other countries. You agree
to comply strictly with all such regulations. You confirm that with
respect to the Embedded Software, you will not export or re-export it,
directly or indirectly, to any countries that are subject to U.S. export
restrictions. Use, duplication or disclosure by the U.S. government is
subject to the restrictions as set forth in the Rights in Technical Data
and Computer Software Clauses in DFARS 252.227-7013(c)(1)(ii)
and FAR 52.227-19(c)(2) as applicable.
VS3_VF_AAA.book
Page 7
Monday, May 23, 2005
11:25 AM
Getting Started
VS3_VF_AAA.book
Page 8
Monday, May 23, 2005
11:25 AM
Getting Started
Thank you for purchasing this Panasonic digital cellular phone.
This phone is designed to operate on GSM networks – GSM900,
GSM1800 and GSM1900. It also supports GPRS for packet data
connections. Please ensure the battery is fully charged before
use.
We, Panasonic Mobile Communications Development of Europe
Ltd., declare that the EB-VS3 conforms with the essential and
other relevant requirements of the directive 1999/5/EC. A
declaration of conformity to this effect can be found at
http://panasonic.co.jp/pmc/en/
About this manual
Symbols used in this manual
The following symbols are used in this manual to represent the
limited availability of the function or service.
= Depending on your SIM card.
= Depending on network availability.
= Depending on your network operator. The service may
only be available on a subscription basis.
Graphics
The graphic elements in this manual are for illustrative purposes
and may differ from the actual phone and/or graphic elements
displayed on the phone. Panasonic reserves the right to change
the information in this manual without prior notice.
Keys
Keys in this manual may differ from the actual keys on your
phone. Refer to page 17 for the icons that represent the keys in
this manual.
VS3_VF_AAA.book
Page 9
Monday, May 23, 2005
11:25 AM
Getting Started
How to read this manual
 Fixed dial in Settings menu on page 109.
This function is SIM card dependent. For other symbols, refer to
page 8.
d Menu navigation
Before following the steps, you need to enter Main menu, then
move through the sub menus, described next to the d icon. “>”
means “scroll through the menu and select”.
In the example:
From Main menu, press Navigation key (up/down/left/right) to
scroll to Settings and press Navigation key (centre). Press
Navigation key (up/down) to scroll to Security and press
Navigation key (centre) or Left Soft key (Select)*1. Press
Navigation key (up/down) to scroll to Fixed dial and press
Navigation key (centre) or Left Soft key (Select)*1. You can also
select Fixed dial by pressing [D].
Now you can continue onto the step 1:
1.
Press Navigation key (up/down) to scroll to Enable or
Disable, then press Navigation key (centre) or Left Soft
key (Select)*1
2.
Enter the PIN2 code (4-8 digits), then press Navigation key
(centre) or Left Soft key (Ok)*1
*1 The word is shown in the lower left hand corner of the
display, indicating a command that the key gives to the
phone when you press it.
Note: There are several ways to select items from menu lists.
See “Menu selection method” on page 24.
VS3_VF_AAA.book
Page 10
Monday, May 23, 2005
11:25 AM
Getting Started
Installing the SIM card and
the battery
The SIM (Subscriber Identity Module) card and the battery must
be installed before using your phone.
Before handling the SIM card and the battery, ensure that the
phone is switched off and the charger is disconnected from the
phone before charging.
Inserting the SIM card
Position the SIM card as shown, with gold contacts facing down
and the notched corner turned to the right. Carefully slide the SIM
card into the SIM card pocket until the card is all the way seated.
Inserting/removing the SIM card
See “Inserting/removing the battery” on page 11 to remove the
battery cover and the battery.
Removing the SIM card
Place a finger on the bottom edge of the SIM card and gently
slide it out.
10
VS3_VF_AAA.book
Page 11
Monday, May 23, 2005
11:25 AM
Getting Started
Inserting/removing the battery
Inserting the battery
1.
2.
Removing the battery
1.
Place your finger on the small tab at the top of the cover.
Slide the cover slightly toward the bottom of the phone,
then lift the cover off the phone.
2.
Place your finger on the tab at the base of the battery. Lift
the battery off the compartment.
Insert the small tabs at the top of the battery into the notch
at the top of the battery compartment. Ensure the 3 gold
contacts align with the 3 gold pins in the phone.
Replace the cover on the phone. Make sure the cover
clicks into place.
11
VS3_VF_AAA.book
Page 12
Monday, May 23, 2005
11:25 AM
Getting Started
Charging the battery
Your phone can be charged either when it is switched on or off.
You can use your phone switched on even while charging.
Ensure that the battery is attached in the phone before charging.
1.
Open and hold the connector cover.
Connect the charger to Charging Connector, then connect
the charger to the mains power supply.
2.
When charging is complete, hold the connector cover and
disconnect the charger from the outlet before removing the
plug from the phone. You should press and hold the
release buttons on both sides of the connector end and
pull gently to disconnect the charger from the phone.
After you have removed the Charging Connector, replace
the connector cover over the socket.
Note: DO NOT force the connector as this may damage the
phone and/or the charger.
If the battery has been deeply discharged, it may take several
minutes before the Battery charge level indicator is displayed.
12
VS3_VF_AAA.book
Page 13
Monday, May 23, 2005
11:25 AM
Getting Started
Battery charge level indicator
While charging
Charging complete
Charging Indicator goes out when charging is completed.
Opening/closing the phone
You can open your phone by pressing One Push Auto Open
button.
Closing the phone during conversation switches the caller’s voice
to the Speaker so you can speak handsfree.
One Push
Auto Open
button
Low battery warning
When the battery power is low, a “Battery low!” message is
displayed and a warning tone sounds. The phone automatically
switches off after the tone. Fully recharge the battery. If you
receive the low battery warning during a conversation, charge
your phone to continue the conversation.
Flip setting
When Active flip setting is set to On (see page 97), you can
answer the call by opening the phone and end the call by closing
the phone.
When One push SMS setting is set to On (see page 76), new
SMS messages can be displayed by opening the flip.
13
VS3_VF_AAA.book
Page 14
Monday, May 23, 2005
11:25 AM
Getting Started
Switching the phone on/off
1.
Press and hold [Y] for several seconds to switch the
phone on
A greeting may be displayed and the phone enters standby
mode.
2.
Press and hold [Y] for several seconds to switch the
phone off
Note: If your SIM card is PIN protected, your PIN code will be
requested. Enter the PIN code and [0]9[5] (Ok). See
“Security” on page 108.
DO NOT switch the phone off while resetting/downloading/
deleting a file and running/terminating a JAVATM application.
14
VS3_VF_AAA.book
Page 15
Monday, May 23, 2005
11:25 AM
About Your Phone
15
VS3_VF_AAA.book
Page 16
Monday, May 23, 2005
11:25 AM
About Your Phone
Phone overview
Speaker
Earpiece
Multi Function
key
Infrared Port
Main Display
Side-up key
Side-down key
One Push
Auto Open
button
Left Soft key
Call key
16
Navigation key
Camera Lens
Right Soft key
Power/End key
Asterisk key
Silent Mode
key
Charging
Indicator
Microphone
Personal
Handsfree
Connector/
Charging
Connector/
Data
Transmission
Connector
Macro Mode
Switch
Self-portrait
Mirror
Indicator/
Illumination
Light
VS3_VF_AAA.book
Page 17
Monday, May 23, 2005
11:25 AM
About Your Phone
Key functions
Function
Key icon*1
Navigation key
Press outside edges to
scroll up [1], down [2],
left [3] or right [4] to
move through menus and
text. Press centre [0] to
select option, perform
Alert mute, or take a
picture or record a video
clip in Camera mode.
[1] [2]
[3] [4]
[0]
Left Soft key
Perform the functions
indicated by text shown in
the lower left-hand corner
of the display.
[5]
Right Soft key
Perform the functions
indicated by text shown in
the lower right-hand
corner of the display.
[6]
Call key
Make or answer a call.
[q]
Key name
Function
Key icon*1
Power/End key
Press and hold to switch
the phone on/off. End or
reject a call. Return to
standby mode.
[Y]
Numeric keys
Enter numbers and
characters. Press and
hold [S]-[K] for Speed
dialling. Press and hold
[L] to enter the
international prefix (+).
[L] to [K]
Asterisk key
Enter “e”. In text entry
mode, press to change the
letter case, or press and
hold to change the input
method.
[e]
Silent Mode key
Enter “r”. Press and hold
to switch the Silent mode
on/off. While entering a
phone number, press and
hold to enter a pause (p).
[r]
Key name
17
VS3_VF_AAA.book
Page 18
Monday, May 23, 2005
11:25 AM
About Your Phone
Key name
Function
Key icon*1
Side-up key*2
Scroll page up. Increase
volume or zoom level.
Perform Alert mute.
Side-down key*2
Scroll page down.
Decrease volume or zoom
level. Perform Alert mute.
[P]
Take a picture or record a
video clip in Camera
mode. Perform Alert mute.
[U]
Multi Function
key*2
[O]
Quick keys
You can easily access features instead of navigating through the
menus.
Key
Function
[0]
Open Main menu/
Keyguard off
[5]
Open Main menu
[6]
Open Vodafone live!
In standby mode
*1 The key icons given in the table represent the actual keys on
the phone.
*2 Located on the right side of the phone.
Short press
[1]9[2]9
[3]9[4]
[q]
[O]9[P]
[0]
[A]
Long press
18
[S]-[K]
Open the shortcut menu
Open Call log
Increase/decrease the
volume
Keyguard on
Dial your voice mailbox
Speed dial
[r]
Silent mode on/off
[U]
Switch to Picture mode
VS3_VF_AAA.book
Page 19
Monday, May 23, 2005
11:25 AM
About Your Phone
Key
Function
Display
During a call
[1]9[O]
Increase the volume
[2]9[P]
Decrease the volume
[U]
Start/stop sound
recording
[q]
Switch between hold and
unhold on one call or
switch between one active
and one held call
Short press
Standby display
Signal strength icon
Time
Date
Battery
charge
level icon
Wallpaper
In Menu list
[A]-[K]
Short press
Select Menu A-K
[e]
Select Menu e
[L]
Select Menu L
[r]
Select Menu r
Left Soft
key
selection
area
Right Soft
key
selection
area
19
VS3_VF_AAA.book
Page 20
Monday, May 23, 2005
11:25 AM
About Your Phone
Status icons
Icon
The status icons are displayed or animated according to the
currently activated functions.
Meaning
Unread SMS message
Unread MMS message
Icon
Meaning
Signal strength; the more bars visible,
the stronger the signal
Only emergency calls are available
In roaming area
Battery charge level
Battery is charging
GPRS is active
Silent profile is active
Meeting profile is active
Outdoor profile is active
Car profile is active
SMS message storage area is full
MMS message storage area is full
JavaTM application is suspended
20
Unread WAP Push message
Call diverts is on
Infrared is active
USB connection is available
New voicemail received
All tones are off
Vibration alert is on
Alarm is set
Non-secure CSD connection
Secure CSD connection
Non-secure GPRS connection
Secure GPRS connection
Keyguard is on
VS3_VF_AAA.book
Page 21
Monday, May 23, 2005
11:25 AM
About Your Phone
Indicator/Illumination Light
The Indicator/Illumination Light flashes or beams when the events
in the table below occur.
To specify the illumination colours for the events, see
“Illuminations” on page 90.
Events
Description
When you are receiving
a call/missed calls
Flash or beam in the selected
colour.
To set a different illumination colour
for respective contacts, see “Storing
a contact in your phone” on
page 39.
When you receive an
SMS/MMS message
Events
Schedule notification
Alarm
Description
Beam in the specified colour. See
“Creating Calendar events” on
page 118 or “Setting the alarm” on
page 112.
Note: If the Indicator/Illumination Light is set to on for battery
charging and the phone is switched on, the Indicator/
Illumination Light illuminates during charging. If the phone is
switched off, the Indicator/Illumination Light will not illuminate.
When you receive a
WAP Push message
When you are having a
conversation
Flash or beam in the selected
colour.
When the flip is closed
When the battery is
charging
When data is being
transferred
Beam in the specified colour.
21
VS3_VF_AAA.book
Page 22
Monday, May 23, 2005
11:25 AM
About Your Phone
Menu navigation
Displaying the menu
The menu system allows you to access functions which do not
have their own dedicated buttons on the keypad.
In standby mode:
1.
[0]9[5] (Menu)
Main menu appears with
9 menu options. (See “Main
menu structure” on page 23.)
2.
[1929394] to scroll to the
required menu 7 [0]9[5]
(Select)
To go back to Main menu:
1.
22
[6] (Back) repeatedly until Main menu screen appears
Shortcut: To jump to and open one of the 9 application
items, simply press the Numeric key corresponding to the
required item’s location. The numbering system is:
VS3_VF_AAA.book
Page 23
Monday, May 23, 2005
11:25 AM
About Your Phone
Main menu structure
Entertainment
Vodafone live!
Games & more .................84
Standby applications .........85
Download games*1 ...........85
Settings............................86
Information.......................86
Vodafone live! .................. 77
What’s New?.................... 77
Games............................. 77
Ringtones ........................ 77
Calendar .............115
Pictures ........................... 77
News ............................... 77
Sport................................ 77
Messaging
Camera
Picture .............................48
Video ...............................54
Tools
SIM Tool Kit*2 .................112
Alarms ...........................112
Sound recorder...............114
Calculator.......................114
Create new ...................... 60
Inbox ............................... 68
Archive ............................ 71
Vodafone Mail .................. 73
Vodafone Messenger ........ 73
Voicemail ......................... 73
Media Album*1 ................. 74
Messaging settings........... 74
Memory status ................. 76
Contacts
Contacts list..................... 38
Add contact ..................... 39
Call log ............................ 42
Speed dial list .................. 43
View groups ..................... 44
Advanced......................... 44
Service numbers*2............ 46
My Files
Pictures..........................122
Sounds...........................126
Videos ............................128
Games & more................129
Text templates ................129
Memory status................130
Settings
Phone settings ..................88
Display settings.................93
Sounds & alerts ................95
Call settings......................96
live!cast settings*1 ............99
Connectivity ....................102
Security ..........................108
*1
*2
23
VS3_VF_AAA.book
Page 24
Monday, May 23, 2005
11:25 AM
About Your Phone
Navigating the applications
Current settings
When you highlight an item in the menu list, the current setting of
the item is displayed in the bar just above the menu list.

In the case shown to the right, the
current setting of Warning tone is
“Off”.
Menu selection method
There are several ways to select items: by using Navigation key or
Left Soft key, or by entering the required number, e or r given
to the item.

To select Warning tone in the display shown to the left:
• [192] to scroll to Warning tone 7 [0]
• [192] to scroll to Warning tone 7 [5] (Select)
• Press the menu number [G]
Keys corresponding to the menu numbers
• [A]-[K]: Menu A-K
• [e]: Menu e
• [L]: Menu L
• [r]: Menu r
Note: Direct access keys to the menus with no menu
numbers/symbols are not available.
24
VS3_VF_AAA.book
Page 25
Monday, May 23, 2005
11:25 AM
Basics
Note: There are several ways to select
items from menu lists. See “Menu
selection method” on page 24.
25
VS3_VF_AAA.book
Page 26
Monday, May 23, 2005
11:25 AM
Basics
Making calls
To make a call, your phone must be within the range of a network
with adequate signal strength.
Standard dialling
In standby mode:
1.
Enter the area code and phone number 7 [q]9[0]
2.
When the other party answers, talk into Microphone
3.
[Y]9[6] (End) to hang up
The duration of the call is displayed.
If Max cost is on, the remaining units are displayed. See
“Max cost” on page 99.
Note: To erase a digit: [6] (Clear)
To increase the earpiece volume: [1]9[O]
To decrease the earpiece volume: [2]9[P]
If Active flip is set to On (see page 97), you can answer the
call by opening the phone and end the call by closing the
phone.
26
Auto redial
Your phone will automatically redial the number up to 10 times
under certain conditions, such as no answer, destination number
is busy, network busy, or some connection errors.
When your call is rejected:
1.
“Would you like to auto redial?” 7 [0]9[5] (Yes) to
start Auto redial
2.
To stop Auto redial while redialling, [Y]9[6] (Cancel)
VS3_VF_AAA.book
Page 27
Monday, May 23, 2005
11:25 AM
Basics
Contacts dialling
International dialling
You can make calls using the numbers in Contacts.
The international prefix (+) and the destination country/region
code should be entered, followed by the area code and phone
number.
d Main menu > Contacts >
Contacts list
1.
1.
Press and hold [L] until “+” is displayed
2.
Enter the country/region code
OR
3.
Enter the area code and phone number 7 [q]
Enter letters to find a contact
beginning with the specific
letters
Note: Many countries/regions include an initial “0” in the area
code. This should, in most cases, be omitted when dialling
international numbers. For further help, contact Vodafone.
[192] to scroll to the
required contact
2.
[q]
3.
If the card has several phone numbers stored, [192] to
scroll to the required number 7 [0]9[5] (Call)
Recent call dialling
You can make calls using the numbers in Call log.
In standby mode:
1.
[q]
2.
[394] to switch to Dialled numbers, Answered calls
or Missed calls screen
3.
[192] to scroll to the required number 7 [q]
27
VS3_VF_AAA.book
Page 28
Monday, May 23, 2005
11:25 AM
Basics
Answering calls
Emergency call
To make an emergency call, the antenna symbol (
present.
When SIM card is inserted:
1.
) must be
Enter the local emergency number 7 [q]9[0]
Note: Most countries support the international emergency
number 112. If you find the number does not work on your
phone, contact Vodafone.
When SIM card is not inserted:
1.
[5] (Options) 7 Select SOS
When there is an incoming call, the phone rings and/or vibrates
(depending on your phone setting). (See “Sounds & alerts” on
page 95.)
When the phone is ringing and/or vibrating:
1.
[q]9[5] (Accept)
Note: If Any key answer is set to On (see page 97), you can
answer the call by pressing any key except [Y], [0], [6]
(Cancel), [U], [O] and [P].
If Active flip is set to On (See page 97), you can answer the
call by opening the phone and end the call by closing the
phone.
Rejecting calls
When the phone is ringing and/or vibrating:
1.
28
[Y]9[6] (Cancel)
VS3_VF_AAA.book
Page 29
Monday, May 23, 2005
11:25 AM
Basics
Missed call notification
Answering a second call
If you cannot answer a call, Missed call notification appears on
the standby screen.
When on an active call, you may receive another call.
To enable this service, Call waiting must be active. (See “Call
waiting” on page 97.)
If you hear an alert tone during a call:
To view the Missed call list:
1.
[0]9[5] (View)
2.
To call back, [192] to scroll to the required log 7 [q]
1.
[q]9[5] (Accept)
The first call is placed on hold.
Alert mute
You can turn the ringing tone and/or vibration off before
answering a call.
When the phone is ringing and/or vibrating:
1.
When the phone is closed: [U]9[O]9[P]
When the phone is open: [0]
2.
[q] to answer the call
2.
[q] to switch between the two calls if required
To reject another call:
1.
[6] (End)
To end the active call and answer the incoming call:
1.
[Y] to end the active call
2.
[q] to answer the call
Auto answer
When you use the optional Personal Handsfree earpiece, you can
answer a call automatically. To enable this service, Auto answer
must be on. (See “Auto answer” on page 97.)
29
VS3_VF_AAA.book
Page 30
Monday, May 23, 2005
11:25 AM
Basics
Silent mode
In-call operations
To use your phone in a quiet situation, you can activate the Silent
mode. You can personalise the Silent mode setting. (See
“Profiles” on page 88.)
In standby mode:
1.
Press and hold [r] to activate/deactivate the Silent mode
Voicemail
Voicemail is a network service which allows callers, who could
not reach you, to leave voice messages. You may need to
subscribe to this service through Vodafone. For further details,
see “Voicemail” on page 73.
Retrieving stored voice messages
When a new voice message is stored, an alert sounds and (
appears on the display and you receive an SMS notification.
1.
Press and hold [A] to call your voice mailbox
If the number is not valid, contact Vodafone.
2.
Follow the recorded instructions
3.
[Y] when finished
30
In-call options (while connected to an
active call)
When on a call, the following options are available.
1.
[5] (Options) 7 Select the required option
Hold Call/Resume
Put or resume a call on hold.
From contacts
Access the Contacts list.
Create SMS
Create a new SMS message.
Inbox(SMS)
Access Inbox(SMS).
Calendar
Access Calendar.
Speaker mode/
Handheld mode
Switch to Speaker or Handheld
talking mode.
Record
Record the conversation. The sound
clip is saved to My Files.
VS3_VF_AAA.book
Page 31
Monday, May 23, 2005
11:25 AM
Basics
Hold
DTMF
You can put a call on hold.
During a call:
DTMF (Dual Tone Multi Frequency) can be sent during a
conversation. These are often used to access voicemail, paging
and computerised home banking. For example, you may need to
enter a number to remotely access voicemail messages. A phone
number may be stored in the Contacts card together with a DTMF
sequence, allowing the number to be dialled upon recall and the
DTMF sequence to be sent automatically.
1.
[q] to switch between Hold Call and Resume
OR
[5] (Options) 7 Select Hold Call or Resume
Handsfree talking
You can have a conversation without holding the phone to your
ear.
To send DTMF during a call:
1.
Enter digits [L]-[K], [e] or [r]
Pause dial
Swapping between Speaker and Handheld mode
1.
[5] (Options) 7 Select Speaker mode or Handheld
mode
Using pauses allows you to send DTMF automatically.
1.
Enter the phone number
2.
Press and hold [r] until a “p” is displayed
Volume control
3.
You can adjust the volume of the phone earpiece, speaker or
headset if attached.
Enter the DTMF digits after the pause, e.g. enter the
number to access voicemail messages
4.
To increase the volume:
1.
[1]9[O]
[q]9[0]
When the call is connected, the DTMF sequence is sent
after 3 seconds.
To decrease the volume:
1.
[2]9[P]
31
VS3_VF_AAA.book
Page 32
Monday, May 23, 2005
11:25 AM
Basics
Multiple calls operations
Making a second call
You can make another call while on a call.
During a call:
1.
2.
32
When on more than one call, the following options are available.
Enter the second phone number or select a phone number
from the Contacts list
1.
To access Contacts list, see “In-call operations” on
page 30.
Swap
Switch between one active and one
held call.
Merge
Enable multi-party conversation
when two calls are connected (one
active, one on hold). See
“Conference” on page 33.
From contacts
Access the Contacts list.
Create SMS
Create a new SMS message.
Inbox(SMS)
Access Inbox(SMS).
Calendar
Access Calendar.
Speaker mode/
Handheld mode
Switch to Speaker or Handheld
talking mode.
Record
Record the conversation. The sound
clip is saved to My Files.
[5] (Options) 7 Select the required option
[q]
The first call is put on hold.
3.
In-call options (while on multiple calls)
[q] to switch between the two calls if required
VS3_VF_AAA.book
Page 33
Monday, May 23, 2005
11:25 AM
Basics
Conference
You can have a conversation with up to 5 different parties at the
same time.
During a call (one active call and one call on hold):
1.
[5] (Options) 7 Select Merge
The 2 calls are joined into a Conference call.
To add new participants:
2. Call the next person or answer an incoming call
3.
[5] (Options) 7 Select Merge
To split the caller from the Conference call and talk
privately:
During a Conference call:
1.
[5] (Options) 7 Select Option
2.
[192] to scroll to the required caller you wish to talk to
3.
[5] (Options) 7 Select Split
The remaining callers can continue with the Conference
call.
4.
To end the private call and rejoin the Conference call, [5]
(Options) 7 Select Merge
To end the Conference call:
4. [Y]
33
VS3_VF_AAA.book
Page 34
Monday, May 23, 2005
11:25 AM
Basics
Text entry
Changing the input method
Input method
Your phone provides three text input methods to enter characters.
T9®
A predictive text entry system. You can enter a
word with fewer key presses.
Multi-tap
A traditional way to type in a letter. Press a key
several times until the required letter appears.
Numeric
You can enter numbers (0-9), e and r.
An icon on the upper left of the screen shows the current input
method and letter case.
Input method
T9®
Multi-tap
Numeric
34
Icon
Letter case
T9y
Automatic
T9u
Upper case
T9
Lower case
Abc
Automatic
ABC
Upper case
abc
Lower case
123
Press and hold [e] to cycle through the input methods as
follows.
T9 (T9y) 7 Multi-tap (Abc) 7 Numeric (123)
Changing the letter case
Press [e] repeatedly until the icon for the required letter case
mode appears.
Auto capital change
When the letter case is set to Automatic (T9y and Abc), the first
character is entered as upper case and subsequent letters as
lower case.
When one of the following characters [. (Period) ! ? ] is entered,
the next character is entered as upper case.
VS3_VF_AAA.book
Page 35
Monday, May 23, 2005
11:25 AM
Basics
T9® text input method
My dictionary
®
The T9 text input method enables you to enter text faster and
easier. You only need to press a key once for any letter you
require on that key. The program searches its built-in dictionary
to predict the word that most closely matches your key presses.
Words that you enter are added to the internal dictionary
automatically so that they are suggested next time. You can also
add new words to the dictionary manually.
To add words to My dictionary:
1.
In text entry screen, press a key once for any letter you
require on that key
1.
In text entry screen, [5] (Options) 7 Select My
dictionary
2.
Continue pressing other keys until the end of a word is
reached
2.
Enter a word 7 [0]9[5] (Add)
3.
Select the required word
OR
If the required word is not in the dictionary, “?” is displayed
after the word.
[5] (Spell) 7 Enter the correct word 7 [0]9[5] (Add)
The word is added to the internal dictionary automatically.
For example, to enter “Hello!”, press keys as follows.
Key
Display
[F]
[D]
[G]
[G]
He
Hel
Hell Hello Hello.
[H]
[A]
[2] x 4
Hello!
35
VS3_VF_AAA.book
Page 36
Monday, May 23, 2005
11:25 AM
Basics
Editing text
Options
Inserting/deleting text
When entering text, the following options may be available by
pressing [5] (Options).
Move the cursor by pressing [1929394] to the position you
want to insert or delete a letter. Press [6] (Clear) to delete a
character. Press and hold [6] (Clear) to delete all the
characters.
Copying/cutting/pasting text
Use contacts*1
Access Contacts menu to use
Contacts data.
Copy/Cut/Paste
See “Copying/cutting/pasting text”
on page 36.
1.
[5] (Options) 7 Select Copy or Cut
2.
[1929394] to move to the left of text you wish to
copy or cut
Add symbol
Show the Symbol list from which you
can select any symbol available on
your phone.
3.
[0]9[5] (Start) 7 [1929394] to highlight the text
7 [0]9[5] (Stop)
Input method
Select the input method.
4.
[1929394] to move to a new required location
T9 on/off*1
Turn On or Off the predictive
dictionary.
5.
[5] (Options) 7 Select Paste
Input language*1
Select a language you wish to write
in.
My dictionary
Add words to the internal dictionary.
Exit
Exit the text edit mode.
*1 Depend on each application.
36
VS3_VF_AAA.book
Page 37
Monday, May 23, 2005
11:25 AM
Basics
The following table shows characters available on your phone.
The characters vary depending on the Input language setting (see page 36).
Key
T9® (T9y, T9u or T9)
[L]
Input method (Input language: English)
Multi-tap (Abc, ABC or abc)
Space
Numeric (123)
.,?1!"-:;@/*()#+_=[]{}'¡¿&%\^~|<>f¢£$
¥ ¤ § ` (Space) * (Linefeed)
[A]
.,-?!’@:;/1
[S]
[D]
[F]
[G]
[H]
[I]
[J]
[K]
A B C 2 (a b c 2)
A B C 2 Γ Á Ä Å Â Ã Æ Ç (a b c 2 α β γ á ä å æ à â ã)
D E F 3 (d e f 3)
D E F 3 ∆ É Ê (d e f 3 δ ε ζ é è ê)
G H I 4 (g h i 4)
G H I 4 Θ Í (g h i 4 η θ ι ì í)
J K L 5 (j k l 5)
J K L 5 Λ (j k l 5 κ λ µ)
M N O 6 (m n o 6)
M N O 6 Ξ Ñ Ó g Ö Ø Ô Õ (m n o 6 ν ξ ó h ñ ö ø ò ô õ)
P Q R S 7 (p q r s 7)
P Q R S 7 Π Σ (p q r s 7 π ρ l σ ß)
T U V 8 (t u v 8)
T U V 8 Φ Ú j Ü (t u v 8 τ υ φ ú k ü ù)
W X Y Z 9 (w x y z 9)
W X Y Z 9 Ψ Ω (w x y z 9 χ ψ ω)
[e]
[r]
Letter case change
(Press and hold) Input method change
. , ? ! " - : ; @ / * ( ) # + _ = [ ] { } ' ¡ ¿ & % \ ^ ~ | < > f ¢ £ $ ¥ ¤ § ` (Space) * (Linefeed)
(Press and hold) Linefeed
Shortcut: To enter numbers while in T9 or Multi-tap method,
press and hold the required numeric key [L]-[K].
37
VS3_VF_AAA.book
Page 38
Monday, May 23, 2005
11:25 AM
Basics
Contacts
Viewing the Contacts list
You can search for a phone number in the Contacts list. All the
numbers stored in the phone and SIM card are displayed.
Options
In the Contacts list, the following options are available by
pressing [5] (Options).
View
View the selected Contacts card.
Call
Call the selected contact.
Create message
Create an MMS, SMS or
Postcard*1, and send it to the
selected contact. See “Creating a
new message” on page 60.
Edit
Edit the selected contact. See
“Editing a Contacts card” on
page 41.
Search
Search a contact by entering
characters.
Add contact
Add a new contact. See “Adding
contacts” on page 39.
Delete
Delete the selected contact.
Speed dial
Assign the selected contact to a
Speed dial. See “Assigning speed
dial keys” on page 43.
Searching for a contact
d Main menu > Contacts > Contacts list
6. [192] to scroll to the
required contact
OR
Enter letters to find a contact
beginning with the specific
letters
7.
38
To view the Contacts card, [0]
VS3_VF_AAA.book
Page 39
Monday, May 23, 2005
11:25 AM
Basics
Copy to phone/SIM
Copy the selected contact to the
phone or the SIM card.
Send via infrared
Send the selected contact to another
device via infrared. See “Infrared”
on page 102.
Adding contacts
Storing a contact in your phone
In the phone, you can store detailed information for each contact.
The entries are retained even if you damage your SIM card.
d Main menu > Contacts > Add contact > Phone
*1
1.
[192] to scroll to the required field 7 [0]
2.
Enter information 7 [0]
Making a call from Contacts
d Main menu > Contacts > Contacts list
1.
[192] to scroll to the required contact
OR
Enter letters to find a contact beginning with the specific
letters
To enter characters, see “Text entry” on page 34.
3.
When entries are completed, [5] (Save)
First name*1
Enter the first name.
Enter the last name.
Last name*
2.
[q]
Mobile
number*1
3.
If the card has several phone numbers stored, [192] to
scroll to the required number 7 [0]9[5] (Call)
Home
number*1
Enter the phone numbers.
Work
number*1
39
VS3_VF_AAA.book
Page 40
Monday, May 23, 2005
11:25 AM
Basics
Mobile
email*1
Select the required picture.
Group
Select the required group.
Enter the e-mail addresses.
Personal
email*1
*1 The contact entry can be saved when at least one of the
items is filled.
Work email*
40
Picture
Birthday
Enter the contact’s birthday.
*2
Postal
address
Enter Additional info, No./
street, City, Postal code,
State and Country.
Note
Enter notes.
Ringtone
Select the required ringtone
from  or My Files.
To download a ringtone, select
Download sounds*2.
Note: If a picture in My Files is attached to a Contacts card, it
appears on the screen when the contact calls you. When the
picture is set to be attached to a Contacts card, the phone
saves the picture resized for the Contacts card if the picture is
larger than the display size.
Message alert
Select the required Message
alert from  or My
Files. To download a Message
alert, select Download
sounds*2.
Illuminations
Select  or the
required illumination colour.
VS3_VF_AAA.book
Page 41
Monday, May 23, 2005
11:25 AM
Basics
Storing a contact in your SIM card
Editing a Contacts card
You can store some information for each contact in your SIM
card.
d Main menu > Contacts > Contacts list
d Main menu > Contacts > Add contact > SIM
1.
Highlight the required Contacts card (See “Searching for a
contact” on page 38.)
1.
[192] to scroll to the required field 7 [0]
2.
[5] (Options) 7 Select Edit
2.
Enter information 7 [0]
3.
Edit the required entry 7 [5] (Save)
3.
Name
Enter the name.
Tel number
Enter the phone number.
[5] (Save)
Note: The length of name and number, and the total amount
of data are SIM dependent.
Storing a contact from Call log
See “Saving a phone number from Call log” on page 42.
41
VS3_VF_AAA.book
Page 42
Monday, May 23, 2005
11:25 AM
Basics
Call log
Saving a phone number from Call log
Recently dialled phone numbers, answered calls and missed calls
are stored in Call log. The numbers in the Call log list can be used
to call, send a message or add to Contacts.
d Main menu > Contacts > Call log
Viewing/Dialling from Call log
d Main menu > Contacts > Call log
1.
[394] to move to Dialled numbers, Answered calls
or Missed calls
2.
[192] to scroll to the required log 7 [0]
3.
[0] to call
Shortcut: You can directly view the Dialled numbers list by
pressing [q] in standby mode.
42
1.
[394] to move to Dialled numbers, Answered calls
or Missed calls
2.
[192] to scroll to the required phone number
3.
[5] (Options) 7 Select Add to contacts
4.
Select New or Add
5.
If New is selected: Enter other information
If Add is selected: Highlight the required contact 7 [5]
(Select) 7 If there is no empty field, “Would you like to
replace?” 7 [0]9[5] (Yes) 7 Select the number you
want to replace in Phone Contacts
6.
[5] (Save)
VS3_VF_AAA.book
Page 43
Monday, May 23, 2005
11:25 AM
Basics
Options
Speed dial
In each Call log list, the following options are available by
pressing [5] (Options).
You can quickly dial phone numbers by pressing keys 2-9.
Call
Call the selected number.
Create message
Create an MMS or SMS message to
the selected number.
Assigning speed dial keys
d Main menu > Contacts > Speed Dial list
1.
[192] to scroll to the required key 7 [0]
2.
Enter phone number 7 [0]9[5] (Ok)
Add to contacts
Store the selected number to
Contacts. See “Saving a phone
number from Call log” on page 42.
Delete
Delete the selected number.
1.
[192] to scroll to the required key 7 [5] (LookUp)
Delete all the logs in the list.
2.
Highlight the required contact 7 [5] (Select)
3.
If the card has several phone numbers stored, [192] to
scroll to the required number 7 [0]9[5] (Select)
Delete all
To assign a speed dial key to a contact:
d Main menu > Contacts > Speed Dial list
Using the speed dial keys
In standby mode:
1.
Press and hold a speed dial key ([S]-[K]) 7 [5] (Call)
43
VS3_VF_AAA.book
Page 44
Monday, May 23, 2005
11:25 AM
Basics
Groups
Advanced
You can categorise the Contacts list stored in your phone into
20 groups.
Synchronisation
Viewing group members
You can synchronise your Contacts list with your network server.
You can just send changes or send all your records to the network
server. For further details, see “Synchronisation” on page 104.
d Main menu > Contacts > View groups
1.
Select the required group
To send only changes to the network server:
Renaming a group
d Main menu > Contacts > Advanced > Synchronisation
> Sync. contacts
The phone confirms completion.
d Main menu > Contacts > View groups
To send all your records to the network server:
The contacts in the selected group are displayed.
1.
[192] to scroll to the required group 7 [5] (Rename)
2.
Enter a new group name 7 [0]
44
d Main menu > Contacts > Advanced > Synchronisation
> Restore contacts
The phone confirms completion.
VS3_VF_AAA.book
Page 45
Monday, May 23, 2005
11:25 AM
Basics
My numbers
You can store your own numbers in the phone and SIM card.
To store numbers in Mobile profile:
d Main menu > Contacts > Advanced > My Numbers >
Mobile profile
1.
[0]9[5] (Create)
2.
Repeat steps [192] to scroll to the required field 7 [0]
39-When entries are completed, [5] (Save)39 in
“Storing a contact in your phone” on page 39
To store numbers in SIM profile:
d Main menu > Contacts > Advanced > My Numbers >
SIM profile
1.
When the profile is empty: [0]9[5] (Create)
When the profile has the stored number(s): [5] (Options)
7 Select Create
2.
Repeat steps [192] to scroll to the required field 7 [0]
41-[5] (Save)41 in “Storing a contact in your SIM card”
on page 41
Options
When viewing My numbers, the following options are available by
pressing [5] (Options).
Edit
Edit the profile.
Create*1
Create a new profile.
Delete
Delete the profile.
Send via infrared
Send the profile via infrared.
*1 Available only for SIM profile.
Displaying the Contacts list sorted by last name/
first name
You can choose to sort the Contacts list by contact’s last name or
first name.
d Main menu > Contacts > Advanced > Display by
1.
Select First name or Last name
45
VS3_VF_AAA.book
Page 46
Monday, May 23, 2005
11:25 AM
Basics
Memory status
Deleting Phone Contacts
You can see the amount of memory available in the Contacts list.
You can delete all the contacts stored in your phone.
d Main menu > Contacts > Advanced > Memory status
d Main menu > Contacts > Advanced > Delete phone
Note: The amount of memory for SIM storage depends on
your SIM card.
To decrease the amount of phone memory used, delete
unwanted data or store data on your PC (see “USB” on
page 107).
Copying contacts
You can copy all the contacts from SIM card to phone, or from
phone to SIM card.
To copy all the contacts from SIM card to phone:
d Main menu > Contacts > Advanced > Copy all from SIM
1.
“Would you like to copy?” 7 [0]9[5] (Yes)
To copy all the contacts from phone to SIM card:
d Main menu > Contacts > Advanced > Copy all to SIM
1.
46
“Only Name and Number fields can be copied.
Continue?” 7 [0]9[5] (Yes)
1.
“Would you like to delete all Phone contacts?” 7
[0]9[5] (Yes)
2.
“Really?” 7 [0]9[5] (Yes)
Service numbers
If your SIM card includes SDN (Service Dialling Number), you can
call a service number by selecting from the list.
SDN enables you to access special services provided by your
network operator, such as customer support, emergency
services, etc.
d Main menu > Contacts > Service numbers
1.
[192] to scroll to the required item 7 [0]9[5] (Call)
VS3_VF_AAA.book
Page 47
Monday, May 23, 2005
11:25 AM
Camera
Camera menu structure
Picture .................................. 48
Video..................................... 54
Note: There are several ways to select
items from menu lists. See “Menu
selection method” on page 24.
47
VS3_VF_AAA.book
Page 48
Monday, May 23, 2005
12:00 PM
Camera
Picture
You can take a picture with the built-in camera, and send them
via MMS or infrared, or use them as wallpaper. You can also
attach a picture to a contact stored in your phone.
Icons on picture preview screen
Zoom level (01-25)
Picture size
(Extra large/Large/Medium/
Small/Main display/Postcard)
Picture preview screen
Image quality
(Super fine/Fine/Normal)
Multi shot mode
Self-timer
(5 or 10 seconds delay)
Night mode
48
Brightness level
(-2, -1, 0, +1 or +2)
VS3_VF_AAA.book
Page 49
Monday, May 23, 2005
11:25 AM
Camera
Taking a picture
d Main menu > Camera > Picture
1.
The display acts as a viewfinder. Move the phone around to
frame your subject
2.
[0]9[U] to capture the image
Shortcut: To directly open the picture preview screen, press
and hold [U] in standby mode.
Caution: To avoid impairing the camera performance, DO
NOT leave the phone with the camera facing direct sunlight.
Operations after taking a picture
To save the image to My Files: [5] (Save)
To return to the preview screen without storing the image: [6]
(Delete)
To send the captured image: See “Sending pictures” on page 51
Taking a self-portrait
You can take your self-portrait using Self-portrait Mirror.
d Main menu > Camera > Picture
1.
Close the flip. Look at yourself in Self-portrait Mirror
2.
[U] on the side of the phone
3.
Open the flip. The image appears on the display. For
further operation, see “Operations after taking a picture”
on page 49
Note: To send a picture via infrared or use as wallpaper, save
the image once, and then go to My Files. (See “Pictures” on
page 122.)
If My Files is full, you cannot take a picture.
If the camera is left in certain conditions including in the
preview screen and capture screen for 3 minutes, the phone
automatically exits Picture mode. If left in the preview screen,
but with the options menu displayed, the phone remains in this
state.
If certain situations such as receiving calls occur during
camera operation, the phone exits Camera mode. If a captured
image is on the screen, it is saved to My Files.
49
VS3_VF_AAA.book
Page 50
Monday, May 23, 2005
11:25 AM
Camera
Zoom
Taking close-up pictures
[1]9[O] to zoom in one level
[2]9[P] to zoom out one level
You can also press and hold keys to quickly reach the required
zoom level.
You can take sharp pictures from a close distance by using Macro
Mode. (Macro focus range: 10 cm)
Turn the Macro Mode switch anticlockwise to ( ) before taking
close-up pictures.
Note: Zoom function may not be available when the picture
size is set to Extra large 1280 x 1024 or Postcard*1.
*1
Adjusting the brightness level
Viewing pictures
The picture brightness indicator shows the current brightness
level.
[4] to increase the brightness level
[3] to decrease the brightness level
Pictures taken with the built-in camera are saved to My Files. To
view the saved pictures, see “Viewing pictures” on page 122.
50
VS3_VF_AAA.book
Page 51
Monday, May 23, 2005
11:25 AM
Camera
Sending pictures
Picture settings
1.
With the captured image on the screen, [0]
2.
Select the required function
Send as MMS
Send the captured image via MMS.
Send as postcard*1
Attach the captured image to a
postcard.
Send to Media
Album*1
Send the captured image to Media
Album.
*1
In the preview screen, the following options are available by
pressing [5] (Options).
Picture size
Select the required size from Extra
large 1280 x 1024, Large 640 x
480, Medium 320 x 240, Small
160 x 120, Main display 240 x
320 or Postcard*1.
Image quality
Select the required quality from
Super fine, Fine or Normal.
Night mode
Select On to take a picture in low
light conditions.
Multi shot mode
15 continuous shots is available.
See “Continuous shooting” on
page 53.
Effect
Select the required colour from
Normal, Sepia, Monochrome or
Negative.
Self-timer
Select the amount of time delay you
require for shooting from Off, 5
seconds or 10 seconds.
51
VS3_VF_AAA.book
Page 52
Monday, May 23, 2005
11:25 AM
Camera
Shutter sound
Select the required sound from
Pattern 1-5.
Switch to video
Switch from Picture mode to Video
mode.
Available space
Show the number of files which can
be saved in the current picture size
and image quality. You can see the
number of files which can be saved
in other image qualities by pressing
[5] (Quality), and in other picture
sizes by pressing [192].
Set to default
Reset the current picture settings to
default.
Help
Show direct key operation in the
preview screen.
*1
52
Direct key operation
You can change the picture settings by pressing one of the
numeric keys which correspond to the functions as follows. Some
functions are depicted by the icon. See “Icons on picture preview
screen” on page 48.
[A]: Switch to video
[S]: Picture size
[D]: Image quality
[F]: Multi shot mode
[G]: Self-timer
[H]: Night mode
[I]: Effect
[L]: Help
Adding a picture to Contacts card
If a picture is attached to a Contact card, it appears on the screen
when the contact calls you.
To attach a picture to a contact, save the image once, and then
go to Contacts. See “Adding contacts” on page 39.
VS3_VF_AAA.book
Page 53
Monday, May 23, 2005
11:25 AM
Camera
Continuous shooting
In Multi shot mode, you can capture a succession of 15 images
with just one press. When you set Multi shot mode on, the picture
size is set to Medium 320 x 240 and Night mode off.
To view the captured images:
[1929394] to scroll to the required thumbnail 7 [0]
You can view the next image by pressing [4] or [2], and the
previous image by pressing [3] or [1].
d Main menu > Camera > Picture
To save one or all the captured images:
1.
[5] (Options) 7 Select Multi shot mode
2.
Select On
3.
[0]9[U] to shoot
The captured images are displayed as thumbnails.
1.
When the required thumbnail is highlighted or the required
image is displayed on the screen, [5] (Options)
2.
Select Save all pictures or Save this one only
One or all pictures are stored to My Files.
Note: You cannot take pictures in Multi shot mode when the
phone is closed.
53
VS3_VF_AAA.book
Page 54
Monday, May 23, 2005
12:00 PM
Camera
Video
You can record video clips with the built-in camera, and send
them via MMS or infrared.
Icons on video preview screen
Zoom level (01-25)
Recording time
(Extended video/For MMS
sending)
Video preview screen
Self-timer
(5 or 10 seconds delay)
54
Brightness level
(-2, -1, 0, +1 or +2)
VS3_VF_AAA.book
Page 55
Monday, May 23, 2005
11:25 AM
Camera
Recording a video clip
d Main menu > Camera > Video
1.
Main display acts as a viewfinder. Move the phone around
to frame your subject
2.
[0]9[U] to start recording
3.
Video recorder records until reaching the clip size limit or
until you press [0]9[U]9[5] (Stop)
4.
Select the required action
Playback
Playback the recorded video clip.
Save to My Files
Save the recorded video clip to My
Files.
Send as MMS
Send the recorded video clip via
MMS.
Send to Media
Album*1
Send the recorded video clip to
Media Album.
Note: To send a video clip via infrared, save the video clip
once, and then go to My Files. (See “Videos” on page 128.)
If My Files is full, you cannot record a video clip.
If the video is left in the preview screen or a recorded video clip
is displayed for 3 minutes, the phone automatically exits Video
mode. If left in preview screen, but with the options menu
displayed, the phone remains in this state.
If certain situations such as receiving calls occur during
camera operation, the phone exits Camera mode. The
recording ends automatically, and the already recorded video
clip is saved to My Files.
*1
Caution: To avoid impairing the camera performance, DO
NOT leave the phone with the camera facing direct sunlight.
55
VS3_VF_AAA.book
Page 56
Monday, May 23, 2005
11:25 AM
Camera
Zoom
Video settings
[1]9[O] to zoom in one level
[2]9[P] to zoom out one level
You can also press and hold keys to quickly reach the required
zoom level.
In the preview screen, the following options are available by
pressing [5] (Options).
Recording time
Select the video recording time from
Extended video or For MMS
sending.
Effect
Select the required colour from
Normal, Sepia, Monochrome or
Negative.
Self-timer
Select the amount of time delay you
require for recording from Off, 5
seconds or 10 seconds.
Switch to picture
Switch from Video mode to Picture
mode.
Available space
Show the number of files which can
be saved in the current recording
time. You can see the number of
files which can be saved in other
recording time by pressing [5]
(RecTime).
Help
Show direct key operation in the
preview screen.
Note: You cannot change the zoom level while recording.
Adjusting the brightness level
The video clip brightness indicator shows the current brightness
level.
[4] to increase the brightness level
[3] to decrease the brightness level
Note: You cannot change the brightness level while recording.
Playing video clips
Recorded video clips are saved to My Files. To play the saved
video clips, see “Playing video clips” on page 128.
56
VS3_VF_AAA.book
Page 57
Monday, May 23, 2005
11:25 AM
Camera
Direct key operation
You can change the video settings by pressing one of the numeric
keys which correspond to the functions as follows. Some
functions are depicted by the icon. See “Icons on video preview
screen” on page 54.
[A]: Switch to picture
[S]: Recording time
[G]: Self-timer
[I]: Effect
[L]: Help
57
VS3_VF_AAA.book
Page 58
Camera
58
Monday, May 23, 2005
11:25 AM
VS3_VF_AAA.book
Page 59
Monday, May 23, 2005
11:25 AM
Messaging
Messaging menu structure
Create new ........................... 60
Voicemail ............................. 73
MMS message ............................... 61
SMS message ................................ 62
Voice message ............................... 65
Postcard*1 ..................................... 65
Call Voicemail ................................ 73
Set mailbox number ....................... 74
Media Album*1 .................... 74
Inbox..................................... 68
MMS.............................................. 68
SMS .............................................. 70
Messaging settings ............. 74
MMS ............................................. 74
SMS .............................................. 75
Archive ................................. 71
MMS.............................................. 71
SMS .............................................. 71
Memory status..................... 76
MMS ............................................. 76
SMS .............................................. 76
Vodafone Mail ...................... 73
*1
Vodafone Messenger ........... 73
Note: There are several ways to select
items from menu lists. See “Menu
selection method” on page 24.
59
VS3_VF_AAA.book
Page 60
Monday, May 23, 2005
11:25 AM
Messaging
Creating a new message
Messaging types
MMS
Multimedia Messaging Service allows you to
send messages containing text, pictures,
sound and video clips from your phone to other
MMS-enabled phones or e-mail addresses.
The recipient can play it as a slide show.
SMS
Short Message Service allows you to send and
receive short text messages on Vodafone
networks or any network that has roaming
agreement. (Dependent on the recipient’s
phone parameters.) With the Illumination
feature, you can express special feelings in a
message.
Voice
message
Voice message allows you to record your voice
and send it via MMS.
60
Postcard*1
MMS postcard is a service from Vodafone that
lets you send an MMS message as an actual
postcard. Simply take a picture using your
built-in camera or select a preinstalled/
downloaded picture, add a message, and
enter a name and address. Vodafone will have
it printed on a postcard, and delivered by mail.
This is only available in countries where the
Vodafone MMS postcard service is active. For
further information, contact Vodafone.
*1
Note: Your phone may have already been set with an MMS
profile when purchased. To change the settings of the profile,
see Advanced setting on page 74.
The message centre number for SMS should be
preprogrammed on the Vodafone SIM card. Changing this
number (see Message centre setting on page 75) may cause
failure of a text message.
VS3_VF_AAA.book
Page 61
Monday, May 23, 2005
11:25 AM
Messaging
Creating an MMS message
d Main menu > Messaging > Create new > MMS
message
1.
Select Add picture, Add text, Add sound or Add video
2.
If Add text is selected: Create text message 7 [0]
See “Text entry” on page 34 for entering text.
If Add picture/Add sound/Add video is selected: Select
the required item stored to My Files 7 [5] (Select)
You can also download new files, take new pictures, record
new sound or video clips for the MMS message.
10. If From contact list is selected: Highlight the required
contact 7 [5] (Select) 7 If the card has several
numbers stored, [192] to scroll to the required number
7 [0]9[5] (Select)
If Enter number/Enter address is selected: Enter
number/address 7 [0]
11. [192] to scroll to Send 7 [0]
Slide options
When Slide is highlighted, the following options are available by
pressing [5] (Options).
3.
To add more than one picture, text, sound or video clip,
[192] to scroll to Slide 7 [0] 7 [0]9[5] (Yes)
Add new
Add a new slide.
4.
Repeat steps 1-3 if required
Send
Send the MMS message after
entering subject and recipient
number or address.
Slide duration
Specify duration of the slide.
Remove slide
Remove the slide from the MMS
message.
Preview slide
Preview the MMS message as a
slide.
To send the message:
5. [5] (Options) 7 Select Send
6.
[192] to scroll to Add subject 7 [0]
7.
Enter subject 7 [0]
8.
[192] to scroll to Add recipient 7 [0]
9.
Select From contact list, Enter number or Enter
address
61
VS3_VF_AAA.book
Page 62
Monday, May 23, 2005
11:25 AM
Messaging
Creating an SMS message
Creating an Illumination message with emoticons
d Main menu > Messaging > Create new > SMS message
With the Illumination feature, you can express special feelings in
a message. The Indicator/Illumination Light responds to the
pictographs in an Illumination message and light in combinations
of colours and light patterns when you receive and view an
Illumination message.
1.
Create text message 7 [0]
See “Text entry” on page 34 for entering text.
2.
To enter recipient’s phone number directly: Enter number
To select recipient’s phone number from Contacts: [0] 7
Highlight the required contact 7 [5] (Select) 7 If the
card has several phone numbers stored, [192] to scroll
to the required number 7 [0]9[5] (Select)
3.
[0] to send the message
d Main menu > Messaging > Create new > SMS message
1.
Create text message
2.
[5] (Options) 7 Select Templates
3.
Select Illumination templates
4.
Select the required emoticon
See “Emoticon list” on page 63.
To preview the Illumination of the messages you create:
[5] (Options) 7 Select Preview illumination
Note: Only recipients who have Illumination message capable
phone can view the Illumination of the messages.
62
VS3_VF_AAA.book
Page 63
Monday, May 23, 2005
11:25 AM
Messaging
Emoticon list
Emoticon
Indicator
Colour
:-)
:-D
>:-<
Light
Pattern
Colour 3
:e
=:-)
:-O
:-I
I-(
;-)
:-P
\^o^/
:’(
(^-^)
0:-)
:-(
Colour 6
Colour 1
:-/
:-S
Colour 5
:-[
:->
8-)
Colour 2
Indicator
Colour
Colour 4
:()
:-||
Emoticon
\(>o<)/
^3^
(o^-^o)
(*~o~*)
(;_;)
Colour 7
Colour 8
Emoticon
Indicator
Colour
(T_T)
Colour 1
(?_?)
(>_<)
(^w^)
^&^
Colour 3
(*o*)
Colour 1
Light
Pattern
Colour 2
(@_@)
Colour 4
p(^-^)p
(-_-)
(_ _)Zzz
Colour 6
Colour 5
(-_-;
(>-<#)
Light
Pattern
(^_~)"
Colour 7
Colour 8
• Pattern A: [Firefly] flickers slowly for about 2 seconds.
• Pattern B: [Flash] flickers fast for about 1 second.
• Pattern C: [Beam] lights for about 1 second (2 seconds in Colour 8).
63
VS3_VF_AAA.book
Page 64
Monday, May 23, 2005
11:25 AM
Messaging
Options
When creating a text message, the following options are available
by pressing [5] (Options).
Add symbol
Show the Symbol list from which you
can select any symbol available on
your phone.
Send
Send the text as an SMS message.
Input method
Select the input method.
Send to many
Send the text to more than one
recipients.
T9 on/off
Turn On or Off the predictive
dictionary.
Preview illumination
Preview illumination message.
Input language
Select a language you wish to write
in.
Select Illumination templates to
create an illumination message or
User templates to use the stored
text templates.
My dictionary
Add words to the internal dictionary.
Templates
Exit
Exit the text edit mode.
Count message
The long message may be divided
into several messages. You can
check the concatenated message
number.
Save
Save the message in Unsent folder.
Use contacts
Access Contacts menu to use
Contacts data.
Copy/Cut/Paste
Copy, cut or paste the text.
64
VS3_VF_AAA.book
Page 65
Monday, May 23, 2005
11:25 AM
Messaging
Creating a voice message
d Main menu > Messaging > Create new > Voice
message
Sound recorder is activated.
1.
[0]9[5] (Start) to start recording
2.
[0]9[5] (Stop) to stop recording
To send the voice message:
3. [5] (Options) 7 Select Send as MMS
If you select Save, the sound clip is saved to My Files.
4.
Repeat steps 1-11 in “Creating an MMS message” on
page 61
To add a picture:
1.
Select Add picture
2.
Select Stored pictures or Download pictures
3.
Select the required picture
To add text:
4. Select Add text
5.
See “Text entry” on page 34 for entering text.
To send the postcard:
6. [5] (Options) 7 Select Send
7.
8.
Creating a postcard
Creating a postcard by using the stored picture or
by downloading a picture
Create text message 7 [0]
[192] to scroll to the required content 7 [0]
Enter information 7 [0]
Send appears on the bottom of the address list when at
least Name, No./street, City and Postal code are
entered.
9.
[192] to scroll to Send 7 [0]
d Main menu > Messaging > Create new > Postcard
65
VS3_VF_AAA.book
Page 66
Monday, May 23, 2005
11:25 AM
Messaging
Creating a postcard by taking a picture
Options
d Main menu > Messaging > Create new > Postcard
While editing the recipient’s information, the following options are
available by pressing [5] (Options).
To take a picture:
1.
Select Add picture
2.
Select Take new picture
3.
[0]9[U] to capture the image
4.
[0] 7 Select Send as postcard
To add text and send the postcard:
5. [6] (Back)
6.
Repeat steps 4-9 in “Creating a postcard by using the
stored picture or by downloading a picture” on page 65
Edit the selected field.
Edit
From
contacts*1
Select the required contact. The
contact’s name and the information
stored in Postal address field are
pasted into the postcard.
Last address
Paste the address of the last sent
postcard.
Edit postcard
Edit the picture or the text message.
Save address
Save the address to Contacts.
*1 Available only when Name is highlighted.
66
VS3_VF_AAA.book
Page 67
Monday, May 23, 2005
11:25 AM
Messaging
Receiving messages
Receiving MMS messages
When you receive a new MMS message, the message icon ( )
is displayed along with a tone, illumination, and/or vibration. The
received MMS messages are stored in Inbox.
Reading MMS messages
Receiving SMS messages
When you receive a new SMS message, the message icon ( )
is displayed along with a tone, illumination, and/or vibration. The
SMS notification also appears on the standby screen.
Reading SMS messages
When an SMS notification is displayed on the standby screen:
1.
[0]9[5] (View)
To read the received MMS messages, see “Inbox” on page 68.
If there is more than one notification, [192] to scroll to
New SMS before step 1.
Note: If you do not want to receive MMS messages
automatically, select Never in Auto download setting (see
page 75). In this case, you will receive a message notification
first, and then you will need to receive messages manually.
If there is one SMS message, the message is automatically
displayed.
2.
If there is more than one SMS message, [192] to scroll
to the required message header in SMS Inbox 7 [0]
3.
When the message is displayed, [0] to show the message
details (sender’s number, date, message centre’s number)
if required
67
VS3_VF_AAA.book
Page 68
Monday, May 23, 2005
11:25 AM
Messaging
Inbox
Reading MMS messages
Inbox stores received MMS and SMS messages.
1.
d Main menu > Messaging > Inbox
Numbers in brackets show the
number of unread messages and the
total number of messages in each
inbox.
When viewing the list of messages, the following options are
available by pressing [5] (Options).
MMS message icons
Read message
68
[192] to scroll to the required message header 7 [0]
Options in the message list
MMS Inbox
Unread message
d Main menu > Messaging > Inbox > MMS
Reply
Create reply message by MMS or
SMS.
Reply to all
Create reply message to all
recipients.
Forward
Forward the selected message.
Copy to album*1
Copy the selected message to
Media Album.
Call
Call the sender’s number.
Add to contacts
Store the sender’s number or e-mail
address to Contacts.
Delete
Delete the selected message.
Delete all
Delete all the MMS messages and
notifications.
MMS notification
VS3_VF_AAA.book
Page 69
Monday, May 23, 2005
11:25 AM
Messaging
Protect/Unprotect
Protect or unprotect the selected
message.
Save picture
Save the attached picture to My
Files.
Details
Show details for the selected
message.
Save sound
Save the attached sound clip to My
Files.
Save video
Save the attached video clip to My
Files.
Use detail
Use the phone number, e-mail or
web address in the selected
message to call, create message,
add to Contacts, etc.
Attached files
Show the attached files.
*1
Options while viewing messages
When viewing the message, the following options are available by
pressing [5] (Options).
Reply
Create a reply message by MMS or
SMS.
Reply to all
Create a reply message to all the
recipients.
Forward as
postcard*1
Select the required text or picture file
to create a postcard. For further
operation, see “Creating a postcard”
on page 65.
Play again
Play the selected message.
Message font size
Select the required font size.
*1
69
VS3_VF_AAA.book
Page 70
Monday, May 23, 2005
11:25 AM
Messaging
Options for notification
SMS Inbox
When the notification is highlighted, the following options are
available by pressing [5] (Options).
SMS message icons
Unread message
Read message
Receive
Receive new messages.
Forward
Forward the message.
Reading SMS messages
d Main menu > Messaging > Inbox > SMS
Reject
Delete the notification from the
message list and the message from
the server.
Call
Call the sender’s number.
Delete all
Delete all the MMS messages and
notifications.
Options
Protect/Unprotect
Protect or unprotect the message.
When viewing the list of messages or the selected message, the
following options are available by pressing [5] (Options).
Details
Show details for the selected
message.
70
1.
[192] to scroll to the required message header 7 [0]
2.
[0] to show the message details (sender’s number, date,
message centre’s number) if required
Reply
Create reply message in MMS or
SMS.
Forward
Forward the selected message.
Call
Call the sender’s number.
Add to contacts
Store the sender’s number to
Contacts.
VS3_VF_AAA.book
Page 71
Monday, May 23, 2005
11:25 AM
Messaging
Use detail*1
Use phone number, e-mail or web
address in the selected message to
call, create message, add to
Contacts, etc.
Delete
Delete the selected message.
all*2
Delete all the SMS messages.
View illumination*1
Check the illumination of the
message.
Delete
*1 Available only when viewing the selected message.
*2 Available only when viewing the list of messages.
Archive
Archive stores MMS and SMS messages that are sent or waiting
to be sent.
MMS
SMS
Sent
Store sent MMS messages.
Outbox
Store undelivered MMS messages.
Drafts
Store unfinished MMS messages.
Sent
Store sent SMS messages.
Unsent
Store undelivered and unfinished SMS
messages.
Viewing messages
d Main menu > Messaging > Archive > MMS or SMS
1.
Select the required folder
2.
[192] to scroll to the required message 7 [0]
71
VS3_VF_AAA.book
Page 72
Monday, May 23, 2005
11:25 AM
Messaging
Options for MMS
Options for SMS
In Sent, Outbox and Drafts folders, the following options are
available by pressing [5] (Options).
In Sent and Unsent folders, the following options are available by
pressing [5] (Options).
Edit
Edit the selected message.
Send
Send the selected message.
Forward*1
Forward the selected message.
Call
Call the sender’s number.
Send*2
Send the selected message.
Copy to album*3
Copy the selected message to
Media Album.
Use detail*1
Use phone number, e-mail or web
address in the selected message to
call, create message, add to
Contacts, etc.
Delete
Delete the selected message.
Delete
Delete the selected message.
Delete all
Delete all the messages in the
folder.
Delete all*2
Delete all the SMS messages in the
folder.
Protect/Unprotect
Protect or unprotect the selected
message.
View illumination*1
Check the illumination of the
message.
Details
Show details for the selected
message.
*1 Available only in Sent folder.
*2 Available only in Outbox and Drafts folder.
*3
72
*1 Available only when viewing the selected message.
*2 Available only when viewing the list of messages.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 80
Has XFA                         : No
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:6f51217d-1f4b-47e4-a61c-11e0eec68eec
Modify Date                     : 2005:06:14 10:17:45+01:00
Create Date                     : 2005:06:14 10:17:26+01:00
Metadata Date                   : 2005:06:14 10:17:45+01:00
Document ID                     : uuid:a47d5829-bdac-4426-8ad1-791f3ffb7054
Format                          : application/pdf
Title                           : VS3_VF_AAA.book
Creator                         : PScript5.dll Version 5.2.2
Author                          : shinsei
Producer                        : Acrobat Distiller 6.0.1 (Windows)

EXIF Metadata provided by EXIF.tools