Panasonic Mobile Communications 208012A UMTS/ GSM Cellular Mobile with Bluetooth® and RFID User Manual Part 2
Panasonic Mobile Communications Development of Europe Ltd UMTS/ GSM Cellular Mobile with Bluetooth® and RFID Part 2
Contents
- 1. User Manual Part 1
- 2. User Manual Part 2
- 3. User Manual Part 3
User Manual Part 2
![212i-mode/i-motion/i-Channel/i-concierWhen the FOMA terminal is in the service area, information automatically arrives.When information arrives, “ ” appears at the top of the display.You can save up to 50 received information files. They are overwritten from the oldest one in order.1When information arrives, “ ” blinks and the content of the information is displayed on the Stand-by display.≥When multiple information files are received at a time, the latest one is displayed on the Stand-by display.≥When a display other than the Stand-by display is shown, the message appears to tell the reception. Select “Confirm” to check the detailed information.■Before Using i-concier≥i-concier is a pay service which is available on a subscription basis (You need to subscribe to i-mode to apply for i-concier).≥If you have not subscribed to Data Security Service (see page 136) but will newly subscribe to i-concier, you will subscribe to Data Security Service as well as i-concier.≥There are two kinds of information; one is sponsored by DOCOMO and the other is by IPs (Information Providers). You are not charged a packet communication fee for DOCOMO-sponsored information. You are separately charged a packet communication fee for IP-sponsored Information when receiving it.≥You are separately charged a packet communication fee for using detailed information.≥While using the international roaming service, you are charged a packet communication fee for both receiving information and browsing detailed information. The packet communication fee for the overseas use differs from the one for the domestic use.≥Depending on the contents (information, i-schedule, and others), you might be separately charged an information fee besides the i-concier monthly fee.≥You are separately charged a packet communication fee for auto-updates of i-schedule, ToruCa, and Phonebook.≥For details on i-concier, refer to “Mobile Phone User’s Guide [i-mode] FOMA version”.Receive Information2Select a message.The detailed information is displayed.≥To clear the message, press h from the Stand-by display, or highlight the message and then press r or h.≥Highlight a message and then press c( ) to switch to the display for selecting a desktop icon. (See page 31)1m1i-concier1Select information.≥An unread mark appears for unread information.≥Schedule event files or ToruCa files might be attached to information, or links are embedded in it for visiting a site of more detailed or related information. To check the contents, select the information with an unread mark.1i-concier display1l(MENU)1スケジューラへ (To scheduler) or トルカへ (To ToruCa)スケジューラへ (To scheduler). . . Displays the Calendar display. (See page 408)トルカへ (To ToruCa). . . Displays the ToruCa Folder list. (See page 318)Displaying i-concier Screeni-concier displayDisplay Schedule/ToruCa](https://usermanual.wiki/Panasonic-Mobile-Communications/208012A.User-Manual-Part-2/User-Guide-1045204-Page-2.png)
![213i-mode/i-motion/i-Channel/i-concier1i-concier display1l(MENU)1設定 (Settings)1Do the following operations.You can set whether to show the received information on the Stand-by display.1i1i-mode settings1Information disp. set.1YES or NOConfiguring i-concier Settingsｉコンシェルとは(What is i-concier?)You can display the explanation about i-concier.インフォメーション受信設定(Information receive settings)You can set the contents of received information, etc.自動お預かり／更新設定 (Automatic saving/Update settings)See page 137.その他共通設定(Other common settings)You can change the profile or perform setting for overseas use, etc.お預かりデータ確認(Check saved data)See page 138.お預かりデータ更新(Update saved data)See page 138.お預かり通信履歴(Communication records of saving)See page 138.各種手続き（ｉコンシェル解約）[Various procedures (i-concier cancellation)]You can cancel a contract of i-concier.ｉコンシェルご利用にあたって(For using i-concier)You can display the usage rules of i-concier.Information Display Setting](https://usermanual.wiki/Panasonic-Mobile-Communications/208012A.User-Manual-Part-2/User-Guide-1045204-Page-3.png)
![216Full Browser/PC Movie You can browse Internet web pages designed for PCs using the Full Browser function. You can display even the Internet web pages that cannot be correctly displayed by i-mode. However, you cannot display or correctly display some Internet web pages.≥The data such as Home URL or Bookmarks registered via Full Browser cannot be used via i-mode. The contents set by Full Browser are invalid for i-mode, either.≥Note that you are charged a high communication fee for the massive data communication such as browsing Internet web pages having many images or downloading data files. For details on the packet communication fee, refer to “Mobile Phone User’s Guide [i-mode] FOMA version”.≥You can browse Internet web pages composed of frames. You can select a frame to display it as well. (See page 218)≥You can display SSL/TLS※-compatible pages via Full Browser.※SSL and TLS are the methods of safer data communication using authentication/encryption technology to protect your privacy. SSL/TLS pages prevent eavesdropping and information alteration during communication by exchanging encrypted data files. Further, server authentication prevents web spoofing, thus making your personal information such as credit card number or postal address exchanged safer.1i1Full Browser1Select an item.Home . . . . . . . . . . . Displays an Internet web page set as Home URL.Bookmark . . . . . . . Displays an Internet web page stored in Bookmark. (See page 196)Last URL . . . . . . . . Displays an Internet web page you viewed last time.Go to location . . . . Displays an Internet web page by entering a URL. (See page 195)Full Browser settings. . . . . . . . . . . . . . . . . Configures Full Browser settings. (See page 220)<Full Browser>Displaying Web Pages Designed for PC≥When “Access setting” is set to “No”, the confirmation display appears asking whether to start Full Browser. Highlight “Yes” and select “OK” to switch setting of “Access setting”, then Full Browser starts up.Further, you can connect to a site for signing up a packet flat-rate service via i-mode by selecting “To sign up a packet flat-rate service, click here”. ≥To end Full Browser, press h with an Internet web page displayed and select “YES”.1…: Displaying in the multiwindow2…Window number/Number of windows3…: During communication in another window: During communication in another frame4…: Phone Mode: PC Mode5…: Displaying in an enlarged frame6…: Normal pointer: Selecting a link: Obtaining or processing data: Drag Mode: Dragging an object: Selecting a text input field: Selecting a Flash movie: Selecting an operable Flash movie: Selecting a text-enterable Flash movieInformation≥You can display up to 1 Mbyte of data per page. For Flash animations of Flash movies, displaying up to 1 Mbyte per page is supported, and for Flash Video, up to 10 Mbytes per file is supported.≥Displaying files of up to Flash8 (Flash9 partly) equivalent is supported. However, depending on the site, you may not be able to play back some files of corresponding version.≥You cannot save Flash movies.≥It may take long to display some Internet web pages.≥You cannot use the following functions in Full Browser:・Phone To function ・Screen memos ・PDF filesFull Browser Display13425Full Browser display6](https://usermanual.wiki/Panasonic-Mobile-Communications/208012A.User-Manual-Part-2/User-Guide-1045204-Page-6.png)
![223Full Browser/PC Movie By using high speed communication, you can play back smooth and high-quality PC movies provided by portal sites, movie specialty sites and other sites on the Internet.≥PC Movie Player supports playback of Windows Media® Video.≥When downloading or streaming a PC movie, you might receive a bulky size of file. Note that you are charged a high packet communication fee for a bulky sent/received file such as a streaming type file whose size is not limited. For the details of the packet communication fee and billing plan, refer to “Mobile Phone User’s Guide [i-mode] FOMA version”.≥The distribution server for streaming type supports Windows Media Services 4.1 and Windows Media Services 9. You cannot play back a streaming type of PC movie distributed from other than Windows Media Services 4.1 and Windows Media Services 9.≥Some sites check the operating environment (browser type, OS type, etc.) are checked and you might not be able to play back PC movies.≥See page 226 for the supported file format of PC movies.PC MovieCategories DescriptionType Playback typeStreaming type(cannot be saved)Plays back while obtainingYou can play back a PC movie while obtaining it. A long time playback is available.Download type(can be saved)Plays back while obtainingWhen “PC Movie auto-play” is set to “ON”, you can play back a PC movie while obtaining it. You can save it to the microSD card after download and play it back without re-connection. Up to 10 Mbytes of a file can be downloaded.Plays back a file saved to the microSD cardTo the microSD card, you can save not only data files obtained by the FOMA terminal but also PC movies obtained or created on a personal computer, and then play them back. You can save a bulky file of up to the space size of microSD card.1Select a PC movie from a PC movie obtainable site1YESSee page 225 for the operation during playback.≥Among the PC movies protected by the license, you can play back the streaming type of PC movies only. You cannot play back the download type of PC movies protected by the license.≥You might not be able to play back PC movies depending on the license setting of the PC movies.≥If files are stored to the maximum when you try to obtain a license to save it to the FOMA terminal, the confirmation display appears asking whether to delete currently stored licenses to save a new one. Select “YES” to delete all the stored licenses to save it. You need to obtain a license again to play back a PC movie whose license is deleted.Downloading PC MoviesPlaying Back a Streaming Type of PC MovieAbout license (Windows Media DRM)](https://usermanual.wiki/Panasonic-Mobile-Communications/208012A.User-Manual-Part-2/User-Guide-1045204-Page-13.png)
![240CameraSetting Image Size and Image QualityFunction Menu of the Finder DisplayInside camera/Outside cameraYou can switch between the inside camera and outside camera.CHG camera-mode 1Select a mode.≥When you select “Continuous mode”, the camera starts in the mode you used last time, “Auto”, “Manual”, or “Auto bracket”.Image size 1Select an image size.File size setting[Movie Mode only]1Select an item.Mail restrict’n (S). . . You can shoot up to 500 Kbytes.Mail restrict’n (L) . . . You can shoot up to 2 Mbytes.Long time . . . . . . . . . You can shoot for a long time. The movie is saved to the microSD card.Image quality You can set the image quality for saving.1Select an image quality.Normal . . . . . .For shooting with standard image quality.Fine . . . . . . . . .For shooting with fairly high image quality.Super fine. . . .For shooting with high image quality.Camera settingsBrightness You can adjust to -3 (dark) through +3 (bright).1Select a brightness level.White balance You can adjust the coloring of the image on the Finder display to create a natural color tone.1Select an item.Auto . . . . . . . . . . . . . .For adjusting white balance automaticallyFine . . . . . . . . . . . . . . .For shooting outdoors in fine weatherCloudy . . . . . . . . . . . .For shooting in cloudy weather or in the shadeLight bulb . . . . . . . . . .For shooting under incandescent lightFluorescent light. . . .For shooting under fluorescent lightAt Camera start-up±0At Camera start-upAutoColor mode set 1Select a color mode.Normal . . . . . . . . For shooting in normal color.Sepia . . . . . . . . . . For shooting in sepia color.Monochrome . . . For shooting in monochrome.Vivid . . . . . . . . . . For shooting with the vivid contours and raised color saturation.Natural . . . . . . . . For shooting with the smooth contours and lowered color saturation.Whitening . . . . . . For shooting faces in bright color.Suntan. . . . . . . . . For shooting faces in dark color.Photo mode You can set a photo mode suitable for the place. 1Select a photo mode.Normal . . . . . . Standard modePortrait . . . . . . For shooting portraitsSports . . . . . . . For shooting moving subjects such as athletesFood . . . . . . . . For shooting dishesScenery. . . . . . For shooting sceneryNight mode. . . For shooting in dark places such as in nighttimeBacklight. . . . . For shooting against the sun (from behind)Character . . . . For shooting charactersSnow . . . . . . . . For shooting in snowy placesSunset. . . . . . . For shooting in sunsetPet . . . . . . . . . . For shooting pets, etc.At Camera start-upNormalAt Camera start-upNormal](https://usermanual.wiki/Panasonic-Mobile-Communications/208012A.User-Manual-Part-2/User-Guide-1045204-Page-30.png)
![241CameraFocus You can set the focus of the outside camera.1Select an item.Face detection . . . For focusing on a person’s faceAuto . . . . . . . . . . . . For focusing automatically before shooting (See page 239)Close-up . . . . . . . . For focusing on a subject in a short distanceLandscape . . . . . . For focusing on a landscape in a long distance≥“Face detection” is available only in Photo Mode.Img. stabilizer[Photo/Movie Mode]You can correct camera shake for when shooting with the outside camera.1Auto or OFFShoot with frame[Photo Mode only]You can shoot a still image with a frame.1ON or OFF1Select a frame.Shutter sound You can set a shutter sound. You can set a shutter sound each for Photo Mode (Continuous Mode) and Movie Mode.1Select a shutter sound.≥While selecting a shutter sound, you can check the selected sound.Flicker correction You can suppress flicker on the Finder display for shooting with the outside camera.1Auto, Mode 1 (50Hz) or Mode 2 (60Hz)Storage settingStore in You can set the storage location for the still images or movies you shot.1Phone or microSDAuto save set You can set whether to automatically save the image after shooting. When “Store in” is “Phone”, the image is saved to the “Camera” folder. When “Store in” is “microSD”, the image is saved to the folder set by “Select storage”.1ON or OFFFile restriction See page 243.At Camera start-upPhoto Mode:Face detectionContinuous/Movie Mode: AutoAt Camera start-upOFFHigh sensitiv.[Photo Mode only]You can shoot with high-sensitivity when shooting with the outside camera.1ON or OFFPhoto light See page 239.Auto timer See page 244.Cont. shooting set.Continuous mode[Continuous Mode only]1Select a mode.Auto . . . . . . . . . . Shoots automatically at an interval and with the number of frames as specified by “Shot interval” and “Shot number”.Manual . . . . . . . . Shoots one by one manually with the number of frames specified by “Shot number”.Auto bracket . . . Shoots automatically nine still images at an interval of about 0.3 second while changing the brightness and color tone one by one.≥Select “Manual” to display the number of frames for continuous shooting.Shot interval[Continuous Mode only]1Select a shooting interval.≥You can set this only in “Auto” of Continuous Mode.Shot number[Continuous Mode only]1Enter the number of photos.≥When “Image size” is set to “VGA (480 x 640)”, you cannot change “Shot number”.≥You can set this only in “Auto” or ”Manual” of Continuous Mode.Movie type set[Movie Mode only]You can select whether to record both the video and voice, or one of them when you shoot the movie.1Normal, Video, or VoiceAt Camera start-upOFFAt Camera start-upNormal](https://usermanual.wiki/Panasonic-Mobile-Communications/208012A.User-Manual-Part-2/User-Guide-1045204-Page-31.png)
![242CameraDisplay size You can set whether to display a still image or movie in the original size (Actual size) or to fit to the screen size on the Finder display.1Actual size or Fit in displayCommon replay mode[Movie Mode only]You can set a shooting size appropriate for attaching to i-mode mail. 1YES≥Image Size is set to “QCIF”, File Size Setting is set to “Mail restrict’n (S)”, and Image Quality (Movie Mode) is set to “Normal”.Icon You can set whether to display icons.1ON or OFFMemory info You can display the used memory space (estimate)/number of stored items.Information<Inside camera/Outside camera>≥When “Image size” is set to larger than “Stand-by (480 x 854)”, and you switch to the inside camera, the camera starts up in “VGA (640 x 480)”.<File size setting>≥When “Long time” is set, “Store in” is set to “microSD”. If you switch “File size setting” to other than “Long time” without ending the camera, “Store in” returns to “Phone”.<Photo mode>≥Even if you change the setting of “Brightness”, “White balance”, “Color mode set”, or “Focus”, each setting changes to appropriate one for each shooting mode when you change “Photo mode”.≥Note that the image may blur in Night Mode because the exposure takes a longer time.<Img. stabilizer>≥Image Stabilizer function is only for decreasing the degree of camera shake, so its effect differs depending on the subject or condition.≥Image Stabilizer might not work effectively in the following cases:・When the camera shakes to a great extent・When zooming is in use・When shooting moving subjects≥“Img. stabilizer” becomes invalid when “Photo mode” of “Camera settings” is set to “Sports”, “Night mode”, or “Pet” in Photo Mode.≥Residual images might remain in the area where the subject is moving, or noise might be found in overall area. In that case, set this function to “OFF”.≥In Movie Mode, the shooting range varies depending on the “Auto” or “OFF” setting because peripheral pixels are used for the processing by Image Stabilizer.≥When this function is activated in Photo Mode, the processing after shooting might be about two seconds longer due to the processing by Image Stabilizer.≥You cannot use Image Stabilizer for the inside camera.<Shoot with frame>≥When “Image size” is set to larger than “1M (960 x 1280)”, you cannot shoot with a frame.≥If you shoot a still image with a frame using the inside camera and save it, the frame is also horizontally reversed when the still image is automatically reversed as a correct image.≥You cannot save the still image shot with a frame as the mirrored image.<Flicker correction>≥If you set to “Auto”, it may take a while to automatically adjust the flicker. In this case, switch to Mode 1 or Mode 2 according to the power frequency provided in the shooting location.<Storage setting>≥See “Select storage” for how to set a storage location on the microSD card.≥If you change “File size setting” to “Long time”, “Store in” is set to “microSD” and “Storage setting” cannot be operated.≥When “Auto save set” is set to “ON”, the image is saved to the latest folder if “Select storage” is not set or the folder set as a destination folder is deleted.Information](https://usermanual.wiki/Panasonic-Mobile-Communications/208012A.User-Manual-Part-2/User-Guide-1045204-Page-32.png)
![2581SegBy using the i-αppli Program Guide, you can select a program from the program guide to start 1Seg or set TV Timer/Timer Recording. (See page 297)1m11Seg1Program guide≥Press l( ) from the display of “Gガイド番組表リモコン (G Guide Program List Remote Control)” to watch the program currently broadcast on the selected channel.≥For details, refer to “Mobile Phone User’s Guide [i-mode] FOMA version”.Information≥Even if “Mail ticker display” is set to “Sender+subject”, the titles are not displayed for Messages R/F, i-mode mail messages, and SMS messages received from the parties not stored in the Phonebook.≥Even when you show the detailed Received Mail display by Multitask while you are watching a 1Seg program, the display appears in the multiwindow. ≥When “Mail ticker display” is set to “OFF” and “Receiving display” is set to “Alarm preferred” and you receive a mail message while watching a 1Seg program, the Reception Result display appears. The mail message is shown in the multiwindow even when you show it from the Reception Result display. However, the viewer display does not appear and the audio from a 1Seg program is not output when you show a mail message from the party whose mail address is not stored in the Phonebook.≥When “ ” appears, press and hold +c for at least one second to switch to the viewer display and then operate.<i-αppli Program Guide>Using i-αppli Program GuideInformation≥You can set the i-αppli Program Guide by “Program guide key” of “Software setting”.≥When you use “Gガイド番組表リモコン (G Guide Program List Remote Control)” for the first time, you need to do initial settings.1Seg enables you to use the data broadcasting in addition to the video and audio. Various information including still images/movies is available from the site linked with TV programs.1Viewer display (Video Mode)1m()Video Mode switches to Data Broadcasting Mode and “ ” appears.≥Audio from a 1Seg program is output even during Data Broadcasting Mode.≥You can display only data broadcasting when you press c( ) in Data Broadcasting Mode. Press c( ) to return to the former display.2Select an item (link).≥The confirmation display appears asking whether to connect to i-mode depending on the data broadcasting and data broadcasting site.≥See page 191 for the operation while a site is displayed.≥This program guide is not available when the mode of 2in1 is set to B Mode.<Data Broadcasting>Using Data BroadcastingInformationInformation≥Each time you press +m( ), Video Mode and Data Broadcasting Mode are switched.≥You cannot display the data broadcasting on the horizontal display.≥You cannot enter pictograms when you enter characters on data broadcasting or data broadcasting site.≥Depending on the program, the audio might be output while the i-mode site is displayed. However, the 1Seg video is not displayed.≥Depending on the program, a tone might be output when you display the data broadcasting or data broadcasting site. In that case, the output of the 1Seg audio temporarily stops, and the tone of the data broadcasting is preferentially output.](https://usermanual.wiki/Panasonic-Mobile-Communications/208012A.User-Manual-Part-2/User-Guide-1045204-Page-48.png)
![2641SegThe icon appears on the desktop.“ ” . . . . Displayed when an alarm is set for today (except the setting for past time).“ ” . . . . Displayed when an alarm is set for tomorrow or onward only.≥If you set TV Timer with “Alarm” set to “OFF”, the icons are not displayed.≥“ ” appears on the viewer display during recording by Timer Recording.≥The audio from a 1Seg program is not output during recording started by Timer Recording. You can output the audio by pressing -r or adjusting the sound volume, however.Function Menu while the TV Timer List or the Timer Recording List is DisplayedInformationNew Go to step 1 of “TV Timer List” on page 261 for TV Timer.Go to step 1 on page 262 for Timer Recording.Edit Go to step 1 of “TV Timer List” on page 261 for TV Timer.Go to step 1 on page 262 for Timer Recording.Sort You can change the display order.1Select an order.Delete this 1YESDelete past You can delete the setting of TV Timer/Timer Recording whose start date/time or end date/time is set for the past date/time.1YESDelete selected 1Put a check mark for the setting of TV Timer/Timer Recording to be deleted1l()1YESDelete all 1Enter your Terminal Security Code1YESMemory info[Timer Recording list only]You can display the used memory space (estimate).When you set an alarm for “TV Timer” or “Timer recording”<TV Timer>If you set “Act. TV w/ alarm” to other than “Auto ON”, the alarm sounds for about five minutes, and illumination lights. The vibrator works as the same setting for “Phone” of “Vibrator”. The set start date/time, channel, program name and an animation appear on the display.If you set “Alarm” to “ON” and “Act. TV w/ alarm” to “Auto ON”, 1Seg automatically starts when the specified time comes. The alarm does not sound.To end watching, press h and select “End 1Seg”.If you set “Off timer”, the confirmation display appears asking whether to continue watching when the specified time elapses. If you select “NO” or do nothing for about 15 seconds, 1Seg automatically terminates.<Timer Recording>About one minute before starting time, the alarm sounds for about two seconds, and illumination lights. The vibrator works as the same setting for “Phone” of “Vibrator”. The set start date/time, end date/time, channel, program name and an animation appear on the display, then the viewer display appears. If you do nothing for about one minute after the recording starts, the Stand-by display appears. You can show the viewer display by pressing x and selecting “Activate 1Seg”.To end recording started by Timer Recording to save video, press p from the viewer display and select “YES”. In Video Mode, you can end recording to save video also by pressing Oo ( ) and selecting “YES”.≥During a callThe alarm sounds from the earpiece.≥During operations<TV Timer>When “Alarm setting” is set to “Operation preferred”, the timer alarm sounds only when the Stand-by display is shown. When it is set to “Alarm preferred”, the timer alarm sounds even while you are operating another function or during a call. (See page 413)<Timer Recording>Timer Recording works according to the setting of “Priority”. (See page 263) However, Timer Recording might not work when you are reading to/writing from the microSD card, or accessing the Data Storage Center.When the time specified for “TV Timer” or “Timer recording” comes](https://usermanual.wiki/Panasonic-Mobile-Communications/208012A.User-Manual-Part-2/User-Guide-1045204-Page-54.png)
![270MusicMusic&Video Channel is a service which automatically delivers up to about one-hour programs at night by just setting your favorite music programs in advance. Further, you can enjoy high-quality movie program of up to about 30 minutes. Programs are updated periodically and you can enjoy the delivered programs at your convenient time such as on commuting.■Before using Music&Video Channel≥Music&Video Channel is a pay service which is available on a subscription basis. (To apply for Music&Video Channel, you need to subscribe to Pake-hodai, Pake-hodai full or Pake-hodai double besides i-mode.)≥Other than the service fee for using Music&Video Channel, you might be separately charged an information fee depending on the program.≥If you insert the UIM to the Music&Video Channel incompatible FOMA terminal after you subscribe to Music&Video Channel, you cannot use Music&Video Channel Service. Note that the service fee applies unless you cancel the Music&Video Channel subscription.≥You cannot set or obtain programs during international roaming.※ Take procedures to halt the distribution of programs before going abroad. Then, after homecoming, resume receiving distribution.※When you try to set or obtain programs during international roaming, note that you are charged a packet communication fee for the i-mode communication. ≥You can use mail functions, display i-mode sites, and so on, while listening to program using Music&Video Channel (Play Background).See page 504 for the combination patterns of simultaneously usable functions.≥For the details on Music&Video Channel, refer to “Mobile Phone User's Guide [i-mode FOMA version]”.Music&Video ChannelIf you previously set a program that you want to watch, the FOMA terminal automatically downloads the program data at night.1m1MUSIC1Music&Video Channel2Set program1Follow the instructions on the display to set a program.For details, refer to “Mobile Phone User’s Guide [i-mode] FOMA version”.≥See page 201 when data files are stored to the maximum.“ ” appears on the Stand-by display 12 hours before the time the program obtaining starts. However, it does not appear if you have inserted a UIM which is different from the one you used to set the program.Programs are automatically obtained at night. The display for obtaining programs does not appear but “ ” appears on the desktop when they are successfully obtained. Press Oo, highlight “ ”, and press Oo( ) to display the Music&Video Channel display. When obtaining fails, “ ” appears.Setting ProgramsWhen a program is setInformation≥When the communication is disconnected during obtaining a program, re-obtaining is automatically tried up to five times by an interval of about three minutes. When a display for obtaining a program is shown, however, the confirmation display appears asking whether to re-obtain the program.≥The ring tone does not sound and the vibrator does not work to notify that obtaining programs starts or is completed. When you set “Music&Video Ch illum.” of “Illumination” to “ON”, the Call/Charging indicator flickers when obtaining programs is completed. (See page 117)≥You can set up to two programs at once.≥Note that a newly obtained program overwrites a saved program and you can no longer play back that saved program afterward. To avoid overwriting, perform “Move program” to move the program to the “Saved program” folder.≥You cannot save the obtained program to the microSD card.](https://usermanual.wiki/Panasonic-Mobile-Communications/208012A.User-Manual-Part-2/User-Guide-1045204-Page-60.png)
![271Music1Music&Video Channel display1Set program1Follow the instructions on the display.You can check or cancel the set program. For details, refer to “Mobile Phone User’s Guide [i-mode] FOMA version”.≥To set programs, you need to register the site which offers Music&Video Channel programs to your My Menu. (See page 194)≥If you have not subscribed to Music&Video Channel, select “About this service” to see the Music&Video Channel introduction page.≥When the programs could not be obtained due to “power off” or “low battery” at the start time of program obtaining, re-obtaining is performed at night of the following day.≥It may take a time to obtain programs, so fully charge the battery and operate in the good radio wave conditions.≥You cannot perform the setting operation and automatic obtaining of the program selected on the Music&Video Channel display or the program in use.≥When you cancel Music&Video Channel, the programs other than those moved by “Move program” are deleted.≥If you insert a UIM which is different from the one you used to set programs, programs cannot be automatically obtained. Set the programs again from the Music&Video Channel display.≥When you select a service menu for Music&Video Channel, the message “Confirm set up information?” appears. If you select “YES”, the programs that have been distributed might be deleted. However, they will not be deleted while the distribution is set to be halted.≥If you insert the UIM of the FOMA terminal that you have been set for programs into another Music&Video Channel compatible FOMA terminal, the programs cannot be obtained automatically. Select “Set program” again from the Music&Video Channel display to automatically update the program setting on the FOMA terminal, then the programs can be obtained automatically.Check/Cancel the Set ProgramInformationInformation≥Even if the setting of a program is canceled, My Menu is not deleted. “ ” appears on the Stand-by display when the automatic program obtaining fails or the program is not updated even after the program distribution date. When the automatic obtaining fails, you can manually obtain the program.1Music&Video Channel display1Select a program1YES≥For a partially obtained program, select “Play” to play it back.≥For a program which has not been updated, select “Play” to play it back.≥See page 201 when data files are stored to the maximum.Obtain a Program ManuallyInformation≥When obtaining of a program is suspended, the part of the program obtained up to that point is saved. To obtain remaining part, you can manually obtain it except in some time zones. When a program has been updated or switched to another program, obtaining starts not from the suspended point but from the beginning.≥You cannot re-obtain the program whose playable deadline has expired. Such a program cannot be updated until the next distribution date.≥You may not be able to manually obtain programs depending on the time zone.](https://usermanual.wiki/Panasonic-Mobile-Communications/208012A.User-Manual-Part-2/User-Guide-1045204-Page-61.png)
![290i-αppli/i-Widget“i-αppli” is a software program for i-mode mobile phones. You can use your FOMA terminal more conveniently by downloading※ various software programs from the i-mode site. For example, you can automatically update the stock price information or weather information, and enjoy games without accessing network.It also supports i-αppli online which enables the online communication among multiple parties using real time communication and i-αppli call (see page 306), so you can enjoy versus games and chat applications.Also, some i-αppli programs are compatible with i-Widget (see page 309).※You are separately charged a packet communication fee.≥The packet communication fee for the overseas use differs from the one for the domestic use. (See page 460)≥For details on i-αppli, refer to “Mobile Phone User’s Guide [i-mode] FOMA version”.You can download software programs from sites to the FOMA terminal. You can save up to 100 files (up to about 2 Mbytes per file), however, the number of files you can save decreases depending on the data volume because the memory space is shared with other data files. (See page 535)1Call up an i-αppli downloadable site1Select a software program.2Select “OK” when downloading ends.≥See page 201 when i-αppli programs are stored to the maximum.≥When downloading ends, the display for Software Setting (Network Set, Stand-by Set, Location Usage, Program Guide Key, or iαppli call) might appear. These settings can be done also from the Software list.3YES or NOYES . . . . Starts i-αppli.NO . . . . . Returns to the site display.i-αppli<i-αppli Download>Downloading i-αppli from SitesWhen you press r or h to suspend downloading an i-αppli program of 100 Kbytes or more, or when downloading is suspended by the radio wave conditions, the confirmation display appears asking whether to resume downloading. Select “YES” to resume downloading the remaining part. Select “NO” to show the confirmation display asking whether to save the file downloaded halfway. Select “YES” to partially save the file.You can re-download the rest of the partially saved i-αppli program from the Software list.An i-αppli mail folder is created automatically each in the Inbox/Outbox Folder list, and the title of the downloaded mail-linked i-αppli becomes the name of the folder.≥You can save up to five mail-linked i-αppli programs.≥You cannot download the software program if the mail-linked i-αppli using the same folder is already in the Software list.≥You cannot download mail-linked i-αppli while Mail Security is set.≥You cannot download mail-linked i-αppli if the Inbox/Outbox Folder list contains five i-αppli mail folders.≥When re-downloading mail-linked i-αppli whose folder only remains, the confirmation display appears asking whether to use the existing i-αppli mail folder. If you select “YES”, the existing folder is used. If you select “NO” because you do not use it, the confirmation display appears asking whether to delete an existing folder and create a new one. You cannot download mail-linked i-αppli without creating a new folder.When downloading is suspendedWhen you downloaded mail-linked i-αppliInformation≥You can download pre-installed i-αppli programs from the “P-SQUARE” site (in Japanese only).iMenu→メニューリスト (Menu List)→ケータイ電話メーカー (Mobile Phone Maker)→P-SQUARE≥Downloading is not available from some accessed sites.QR code for accessing the site](https://usermanual.wiki/Panasonic-Mobile-Communications/208012A.User-Manual-Part-2/User-Guide-1045204-Page-80.png)
![296i-αppli/i-WidgetWith the Spur-of-the-moment English conversation dictionary, you can check the English expressions used in your daily life or for overseas travel, or which is useful in business. Further, this is a comprehensive English dictionary that comes with “English-Japanese/Japanese-English dictionary of Gakken JISUPA” that enables you to check English words and Japanese phrases. You can also perform cross-reference between dictionaries.≥You are charged a packet communication fee for downloading audio data. As the size of voice data is bulky, you are advised to subscribe to Pake-hodai, Pake-hodai full or Pake-hodai double.≥The voice data of the “Spur-of-the-moment English conversation dictionary” and dictionary data of “English-Japanese dictionary” and “Japanese-English dictionary” are saved to the microSD card. While accessing the microSD card, wait without operating the keys. According to the number of audio data files on the microSD card, it may take long to finish accessing.≥The installed e-dictionary uses “Spur-of-the-moment English conversation dictionary” and “English-Japanese/Japanese-English dictionaries of Gakken Co., Ltd.”.1Software list1とっさの英語辞典 (Spur-of-the-moment English Dictionary)1Read “免責 (Exemption clause)” thoroughly1OK≥If you remove a check mark for “アプリ起動時に常に表示する。 (Always shows this display at the start of this application program.)”, “免責 (Exemption clause)” does not appear when you start the program next time.2Select a dictionary to be used.英会話とっさのひとこと辞典(Spur-of-the-moment English conversation dictionary). . . .The Spur-of-the-moment English conversation dictionary starts. Check the English expressions by specifying a scene or keyword you encounter or use in your daily life. Further, you can confirm those English expressions with voice.学研 辞スパ英和／和英辞典(English-Japanese/Japanese-English dictionary of Gakken JISUPA). . . . The English-Japanese/Japanese-English dictionary starts. Enter the English spelling/Japanese reading for a word into the input box for searching. When the dictionary is not downloaded, the confirmation display appears asking whether to download it.英会話とっさのひとことクイズ(Spur-of-the-moment English conversation quiz). . . .You can enjoy quizzes made from the title expressions.≥If you select l() → “お気に入り登録 (Store as bookmark)” from the search result display, you can bookmark the result. Further, if you press Oo or select l() → “音声データ管理 (Manage voice data)” → “章毎ダウンロード (Download by chapter)”/“一括ダウンロード (Download at one time)”, you can download voice data to play back.とっさの英語辞典 (Spur-of-the-moment English Dictionary)Just by speaking a phrase to be translated into your FOMA terminal, this application program translates it from Japanese to English or Chinese and vice versa.≥You can use all the functions charge free for 60 days from when you start using this application program. Some phrases available for translation are restricted on and after the 61st day. To use all the services, you need to register in My Menu (charged) from the “しゃべって翻訳 (Speech Translation)” site by ATR-Trek Co., Ltd. (in Japanese only)[How to access: iMenu→メニューリスト (Menu List)→辞書／学習／便利ツール (Dictionary/Study/Convenient Tool)→辞書／翻訳 (Dictionary/Translation)→しゃべって翻訳 (Speech Translation)]≥You are separately charged a packet communication fee.1Software list1日英しゃべって翻訳_P (J-E Speech Translation_P) or 日中しゃべって翻訳_P (J-C Speech Translation_P)1SKIP≥Select “日英しゃべって翻訳_P (J-E Speech Translation_P)” for using J-E version, or select “日中しゃべって翻訳_P (J-C Speech Translation_P)” for using J-C version.2Read “しゃべって翻訳とは (What is Speech Translation?)” and “ご利用規約 (Usage rules)” thoroughly1同意する (Agree)≥You need to agree with “ご利用規約 (Usage rules)” when you use the program for the first time.3Read “ご利用注意事項 (Cautions in use)” thoroughly1OK1はい (YES)≥If you select “いいえ (NO)”, “しゃべって翻訳とは (What is Speech Translation?)”, “ご利用規約 (Usage rules)”, and “ご利用注意事項 (Cautions in use)” do not appear when you start the program next time.4はい (YES)1OK≥“アプリの使い方 (How to use application)” appears at the first startup.日英版／日中版 しゃべって翻訳 for P(J-E/J-C Speech Translation for P)The display is for J-E version.© ATR-Trek Co., Ltd.](https://usermanual.wiki/Panasonic-Mobile-Communications/208012A.User-Manual-Part-2/User-Guide-1045204-Page-86.png)
![297i-αppli/i-Widget5Select a menu item.日→英 翻訳 (Translate Japanese to English) . . .Starts translation from Japanese to English.英→日 翻訳 (Translate English to Japanese) . . .Starts translation from English to Japanese.日→中 翻訳 (Translate Japanese to Chinese) . . .Starts translation from Japanese to Chinese.中→日 翻訳 (Translate Chinese to Japanese) . . .Starts translation from Chinese to Japanese.シーンを変更 (Change scene) . . .Select a scene suitable for words to be translated.≥Press i to switch between Japanese and English or Chinese.This is a convenient i-αppli program that bundles the TV program list and AV remote control function and the monthly charge is free.Anytime and anywhere you are, you can easily obtain the terrestrial digital, terrestrial analog or BS digital TV program information for the desired time zone. You can know about titles, contents, and start/end times of TV programs. Further, you can start a 1Seg program from the program list and vice versa.If there is any program you want to watch, you can set timer recordings of the program on a DVD recorder, etc. over the Internet. (You need to have a DVD recorder, etc. that supports the remote timer recording function. And you need to perform initial settings of this application program.) Further, you can search for the program information by keywords such as program genres or celebrities you like, or pickup keywords on the top of the display. You can also remote-control a TV, video recorder, and DVD player. (Some models are not supported.)≥See “Using Infrared Remote Control Function” on page 386 for details on the infrared remote control.≥You need to make the initial settings and to agree with the usage rules for the first time.≥You are separately charged a packet communication fee.≥To use this application program overseas, set the FOMA terminal’s clock to Japan time.≥For details, refer to “Mobile Phone User’s Guide [i-mode] FOMA version”.≥This software program is not available when the mode of 2in1 is set to B Mode.Gガイド番組表リモコン (G Guide Program List Remote Control)※The display is for reference. The actual one may differ.Local programs according to your region appear on your display.You can set 1Seg TV Timer for programs you want to watch by selecting from the program list of this application program.How to set TV Timer1. Software list1Gガイド番組表リモコン (G Guide Program List Remote Control)1Highlight a program you want set TV Timer for and press i()1視聴予約 (TV Timer)1予約実行 (Execute booking)1Operate following the instructions on the display.You can select a program you want to record and set a timer recording from the program list of this application program.How to set a timer recording1. Software list1Gガイド番組表リモコン (G Guide Program List Remote Control)1Highlight a program to be set for a timer recording and press i()1♯ワンセグ録画予約 (1Seg timer recording)1予約実行 (Execute booking)1Operate following the instructions on the display.(You can set a timer recording also by highlighting a program and pressing s.)If you have a DVD recorder, etc. that supports the remote timer recording function, you can set timer recordings from the program list of this application program over the Internet even if you are away. For remote timer recording, you need to make initial settings of this application program.How to make initial settings1. Set the Internet connection for the DVD recorder, etc.(Refer to the instruction manual of the DVD recorder, etc. you use.)2. Software list1Gガイド番組表リモコン (G Guide Program List Remote Control)1i()1リモート録画予約 (Remote timer recording)1Operate following the guidance.How to set timer recordingsAfter the initial settings, specify your desired program and select “リモート録画予約 (Remote timer recording)”. Then, the DVD recorder, etc. specified on this application program is connected via the Internet, and you can set timer recordings.≥You are separately charged a packet communication fee.About TV timer functionAbout timer recording functionAbout remote timer recording function](https://usermanual.wiki/Panasonic-Mobile-Communications/208012A.User-Manual-Part-2/User-Guide-1045204-Page-87.png)
![299i-αppli/i-Widget≥For service contents and details of subscriptions, refer to the i-mode site of DCMX (in Japanese only).・i-mode site: iMenu→DCMX iDi-αppli Banking is an i-αppli program that enables you to conveniently use mobile banking (check your account balance and deposits/withdrawals, and transfer/shift money) from your FOMA terminal. You can use up to two financial institutions by entering your specified password at the startup of the i-αppli program. You can pay bills/payment notices also by Pay-easy.≥To use mobile banking on i-αppli Banking, you need to have the bank account and subscribe to the internet banking service of each bank.≥You are separately charged a packet communication fee.≥For details on i-αppli Banking, refer to “Mobile Phone User’s Guide [i-mode] FOMA version”.≥For the information about i-αppli Banking, refer to i-mode site (in Japanese only).i-mode site: iMenu→メニューリスト (Menu List)→モバイルバンキング (Mobile Banking)→ ｉアプリバンキング (i-αppli Banking)QR code for accessing the siteInformation≥To start this application program for the first time, you need to agree with “ご利用上の注意 (Cautions in use)”.≥You are charged a packet communication fee for settings and operations. ■Cautions on Osaifu-Keitai compatible i-αppliNote that we take no responsibility for any information set on your IC card.ｉアプリバンキング (i-αppli Banking)※The display is for reference.The actual one may differ.QR code for accessing the siteOn the map, you can easily find out area information, shop information, and the contents created by users. You can switch to the aerial photo mode and view the map by Street View. You can also check the transportation to the destination by the line search.© 2008 Google - Map data© 2008 Geocentre Consulting, NFGIS, Zenrin,Europa Technologies■About the Map displayl: Displays the menu.i: Searches. (Searches shops in the area, service information, and other places to show on the map.)Mo: Moves the cursor.Oo: Context menu [現在地の住所 (Postal address of current location), ここまでの経路 (Route up to here), ここからの経路 (Route from here), ストリートビュー (Street view), お気に入りに保存 (Bookmark), 付近を検索 (Search the vicinity)]1: Zoom out2: Switches map/aerial photo.3: Zoom in0: Shows the current location.a: Saves to/Displays from bookmark.≥You need to agree to the usage rules when you use it for the first time.≥You are separately charged a packet communication fee.≥For details, refer to “ヘルプ (Help)” in the menu.モバイルGoogleマップ (Mobile Google Map)](https://usermanual.wiki/Panasonic-Mobile-Communications/208012A.User-Manual-Part-2/User-Guide-1045204-Page-89.png)
![300i-αppli/i-Widget“モバイルSuica登録用ｉアプリ (Mobile Suica Setup i-αppli)” is the i-αppli program NTT DOCOMO provides for making initial settings required before you use the Osaifu-Keitai compatible service, “Mobile Suica”, offered by JR East. Make the initial settings on this application program, and follow the online instructions to download the Suica application from the JR East site and subscribe to it.≥You need to agree with “ご注意事項（必読） [Cautions (Must read)]” when you use this program for the first time.≥You are separately charged a packet communication fee.≥You can delete this application program after completing initial settings, but the area within the IC card you set remains occupied. To use the occupied area for other services, you need to initialize all the data in the IC card (full format, hereafter).≥You need to visit a docomo shop to perform a full format.≥All the data files on the IC card are deleted by the full format.≥When you use Mobile Suica Service after a full format, you need to make initial settings again using this i-αppli program.≥For the information about Mobile Suica, refer to the i-mode site (in Japanese only).i-mode site:iMenu →メニューリスト (Menu List) → おサイフケータイ(Osaifu-Keitai) → モバイルSuica (Mobile Suica)≥“Mobile Suica” is a registered trademark of East Japan Railway Company.モバイルSuica登録用ｉアプリ (Mobile Suica Setup i-αppli)※The display is for reference.The actual one may differ.What you can do with i-Avatar Maker■Create avatarsYou can easily create avatars by using various parts prepared by i-Avatar Maker. You can create avatars viewing the images shot by the camera or stored in Data Box, or can create avatars based on the prepared samples.■Use avatarsYou can use the created avatars by converting to the materials for Deco-mail, Deco-mail pictograms, Decome-Anime, or the Machi-chara images which support i-concier.By registering the created avatars on the i-avatar site, you can change their clothes and publicize them on the competition site.≥You are separately charged a packet communication fee for converting avatars to Decome-Anime templates or Machi-chara images.≥You are separately charged a packet communication fee for registering avatars on the i-avatar sites.≥You might need to purchase items for changing their clothes on the i-avatar site.≥i-avatar is a trademark of D2 COMMUNICATIONS.≥“Avatar Maker” is a trademark of ACRODEA, Inc.ｉアバターメーカー (i-Avatar Maker)※The display is for reference.The actual one may differ.© 2008 Acrodea, Inc./© eitarosoft](https://usermanual.wiki/Panasonic-Mobile-Communications/208012A.User-Manual-Part-2/User-Guide-1045204-Page-90.png)
![302i-αppli/i-Widget“楽オク☆アプリ (Rakuoku ☆ Application)” enables you to easily exhibit your goods on Rakuoku whenever you want wherever you are. The instruction guides you through exhibition procedures, and you can make “体験出品 (trial entries)”, so you can use it easily even if you are a beginner. As the “かんたん入力 (Easy entering)” function and the convenient functions such as shooting/editing photos and saving records are available, you can exhibit your goods in a shorter time than you do on sites.≥You need to agree with “利用規約 (Usage rules)” when you use this program for the first time.≥You are separately charged a packet communication fee.≥For details on Rakuoku, refer to “Mobile Phone User’s Guide [i-mode] FOMA version”.≥To exhibit on Rakuoku, you need to subscribe to the Rakuten membership and register on My menu.≥For the information about Rakuoku, refer to i-mode site (in Japanese only).i-mode site: iMenu→オークション (Auction)■Widget αppli Supported (see page 309)The information of the goods recommended by Rakuoku or the goods you exhibit/bid for is displayed, so you can easily check the auction state.楽オク☆アプリ (Rakuoku ☆ Application)※The display is for reference.The actual one may differ.QR code for accessing the siteBy using the GPS function and map, you can read the map of the place you are currently in or you specify, or check area information. You can also navigate yourself to the destination by vehicle, on foot, or by car. Further, you can easily get transfer information by voice input. ≥You are separately charged a packet communication fee. You are advised to subscribe to Pake-hodai, Pake-hodai full or Pake-hodai double for using this software program.≥If you delete this software program and then when you want to resume it, download it from “ｉエリアー周辺情報ー (i-area -Area Information-)”.≥This software program is not available when the mode of 2in1 is set to B Mode.≥Note that we are not held responsible for the accuracy and promptness of the map and route information.≥While driving, ensure that a person other than the driver operates this application program.≥This software program supports motion tracking.≥See page 327 for details on operations.“Start! ｉウィジェット (Start! i-Widget)” is an application program that enables you to watch how to use i-Widget through a movie.Further, you can access the i-mode site where you can download application programs other than the ones stored in the FOMA terminal.≥You are charged a packet communication fee when you select “ダウンロード (Download)” and access i-mode.地図アプリ (Map Application)Start! ｉウィジェット (Start! i-Widget)※The display is for reference.The actual one may differ.](https://usermanual.wiki/Panasonic-Mobile-Communications/208012A.User-Manual-Part-2/User-Guide-1045204-Page-92.png)
![306i-αppli/i-WidgetWith the i-αppli call function, you can call up your friends on the i-αppli program to have online matches and to share the information with them.≥With i-αppli calls, you are called up in two ways; directly by your friend or by the IP (Information Service Providers).≥Rejecting all i-αppli calls is also available.For details, refer to “Mobile Phone User’s Guide [i-mode] FOMA version”.1While an i-αppli program which supports i-αppli call is running1Make an i-αppli call1YES≥The operation differs depending on the i-αppli program.Information≥Software programs do not start automatically in the following cases:・When the FOMA terminal is turned off・When the date and time are not set・When another function is working・During Lock All・During Personal Data Lock・During playback of animations/Flash movies・When the time set for automatic start is identical to the reserved time set for “Software update”, or the time set for an alarm of “Alarm”, “Schedule”, “ToDo”, “TV timer”, or “Timer recording”・When a start time has been specified to the same software program within 10 minutes from the previous auto-start≥If automatic start fails, “ ” appears on the desktop. Select the icon to show the Auto Start Info.Using i-αppli CallSend i-αppli Calls to Call up MembersWhen an i-αppli call comes in, the i-αppli call ring tone sounds and the confirmation display appears asking whether to answer it.1The i-αppli call confirmation display appears1Select an item.Accept. . . . . . . Answers the i-αppli call. The target i-αppli program starts.Reject . . . . . . . Rejects the i-αppli call.Hold. . . . . . . . . Holds the i-αppli call. “ ” appears at the top of the display, and “ ” appears on the desktop. Press Oo, highlight “ ” and press Oo to show the i-αppli call logs.≥Some i-αppli calls activate the i-αppli program without showing the confirmation display.≥When you answer an i-αppli call, you might be charged a packet communication fee.≥While a display other than the Stand-by display is shown, only “ ” tells you the arrival of i-αppli calls.≥When the target i-αppli program is already running, the operation varies depending on the i-αppli program.The confirmation display might appear asking whether to download the target i-αppli program or to access a site. Select “YES” to download it or to access the site. Select “NO” to return to the Stand-by display. In this case, “Accept” is recorded on the i-αppli call log.Receive i-αppli CallsWhen the target i-αppli program is not found on the FOMA terminal when you select “Accept”](https://usermanual.wiki/Panasonic-Mobile-Communications/208012A.User-Manual-Part-2/User-Guide-1045204-Page-96.png)
![309i-αppli/i-WidgetWhen the i-αppli Stand-by display does not end successfully, you can check the date/time and its reason.1m1i-αppli1iαppli info1End stand-by info≥When “ ” is displayed on the End Stand-by Info display, press i( ), and select “Copy info” to copy the information. Select “Delete info”, and select “YES” to delete the information.Depending on the i-αppli program, you can save its data files on the microSD card. You can display the i-αppli data files saved on the microSD card.1m1i-αppli1iαppli(microSD)1iαppli dataEnd Stand-by Info<iαppli Data>Displaying i-αppli Data Files on the microSD CardFunction Menu while i-αppli Data File is DisplayedFolder info You can display the information of the software program that uses the selected folder, available/unavailable for folder usage, and the reason if unavailable.Delete folder You can delete the selected folder and files in the folder.1Enter your Terminal Security Code1YESi-Widget is a useful function that enables you to access the frequently-used contents such as the calculator, clock, and stock price information (Widget αppli) by pressing the i-Widget key (r).You can add Widget αppli programs by downloading from sites offered by IPs (Information Providers). (See page 290)Also, you can paste multiple (up to eight) Widget αppli programs to the i-Widget display to customize it to your taste.≥Multiple Widget αppli programs might communicate when you show the i-Widget display.≥You are separately charged a packet communication fee for downloading Widget αppli programs or showing the i-Widget display.≥As for overseas use, you are charged a packet communication fee each time a Widget αppli program communicates (The domestic toll free service does not apply).≥For details on i-Widget, refer to “Mobile Phone User’s Guide [i-mode] FOMA version”.■Widget αppli listi-Widgetファミリー伝言板 (Family Message Board) See page 301時刻表ウィジェット (Timetable Widget) See page 301楽オク☆アプリ (Rakuoku ☆ Application) See page 302地図アプリ (Map Application) See page 302Start! ｉウィジェット (Start! i-Widget) See page 302マクドナルド トクするアプリ (McDonald’s TOKUSURU KEITAI application)See page 303iWウォッチ (iW Watch) See page 303株価アプリ (Stock Prices Application) See page 304Googleモバイル (Google Mobile) See page 304](https://usermanual.wiki/Panasonic-Mobile-Communications/208012A.User-Manual-Part-2/User-Guide-1045204-Page-99.png)
![310i-αppli/i-WidgetAfter starting i-Widget, you can simultaneously start multiple Widget αppli programs. You can show the multiple running Widget αppli programs on the i-Widget display.1Press r.i-Widget starts.When any Widget αppli program is running, the i-Widget display is displayed. When no Widget αppli program is running, the Widget αppli list is displayed.≥You can start i-Widget also by selecting a Widget αppli program from the Software list.Using i-WidgetStart i-Widgeti-Widget displayInformation≥With i-Widget, you can simultaneously start and show up to eight Widget αppli programs. When you switch Widget αppli programs to be displayed while eight Widget αppli programs are running, end an unwanted Widget αppli program and then start another one from the Widget αppli list. See page 311 for ending a Widget αppli program. ≥If you have not operated for three minutes from the Widget αppli list or i-Widget display, the Stand-by display automatically returns. The Stand-by display does not automatically return from the Widget αppli operation display.≥Even if you end i-Widget while a pre-installed Widget αppli program is running and change the UIM or initialize the FOMA terminal, the Widget αppli program does not end and remains running as launched from i-Widget.■About i-Widget display1Widget αppli displayOn the Widget αppli list, all Widget αppli programs are displayed and “ACTIVE” is displayed for the running Widget αppli program. On the i-Widget display/Widget αppli operation display, each application program is shown in running state.: Widget αppli:i-αppli DX compatible Widget αppli: Widget αppli for communication: GPS compatible Widget αppli: Osaifu-Keitai compatible Widget αppli: Downloaded from an SSL page2Navigation displayNavigation that corresponds to the key operation is displayed.You can change the position of Widget αppli programs on the i-Widget display. You cannot specify each position as it is automatically changed.1i-Widget display1i[シャッフル (Shuffle)]Shuffle i-WidgetWidget αppli list i-Widget display Widget αppli operation display21](https://usermanual.wiki/Panasonic-Mobile-Communications/208012A.User-Manual-Part-2/User-Guide-1045204-Page-100.png)
![311i-αppli/i-WidgetYou can end i-Widget to return to the Stand-by display.1Widget αppli list/i-Widget display/Widget αppli operation display1h≥You can return to the Stand-by display also by pressing r or m[戻る (Return)] from the i-Widget display.≥For the Widget αppli operation display, the confirmation display appears asking whether to finish it.You can set whether to communicate via i-Widget overseas.1m1i-αppli1iαppli settings1i-Widget roaming set.1ON or OFFYou can set whether to sound an effect tone at the start of i-Widget.1m1i-αppli1iαppli settings1i-Widget sound effect1ON or OFFEnd i-WidgetSetting i-Widgeti-Widget Roaming SettingInformation≥When you arrive at a destination overseas, the setting changes to “OFF” and the confirmation display appears when you start i-Widget.i-Widget Sound EffectInformation≥The effect tone at the start of i-Widget sounds at the volume set for “Phone” of “Ring volume”. It sounds at Level 2 when “Step” is set.1Widget αppli list1Select a Widget αppli program to be started.You can show the Widget αppli operation display.≥You can start a Widget αppli program also by selecting it from the Software list.≥You can show the Widget αppli operation display also by selecting a running Widget αppli program.≥You can show the i-Widget display by pressing r or m[戻る (Return)] from the Widget αppli operation display.1i-Widget display/Widget αppli operation display1Highlight a Widget αppli program to be ended and press c[アプリ終了 (END Widget αppli)]1YESWhen a Widget αppli program does not end successfully, you can check the date/time and its reason.1m1i-αppli1iαppli info1End Widget appli inf≥When “ ” is displayed on the End Widget αppli Inf display, press i( ), and select “Copy info” to copy the information. Select “Delete info”, and select “YES” to delete the information.<Start Widget αppli>Starting Widget αppliEnd Widget αppliEnd Widget Appli Inf](https://usermanual.wiki/Panasonic-Mobile-Communications/208012A.User-Manual-Part-2/User-Guide-1045204-Page-101.png)
![314Osaifu-Keitai/ToruCaOsaifu-Keitai is the function that enables you to save points and tickets as well as bills and changes to the mobile phone.Osaifu-Keitai mounts the IC card, so you can make payment and others just by placing the FOMA terminal over the scanning device in a shop.Further, you can use communications to deposit electronic money or to check your account for balance or usage histories. Security is fully secure※1 so that you can make use with a sense of security.For details on Osaifu-Keitai, refer to “Mobile Phone User’s Guide [i-mode] FOMA version”.≥To use the Osaifu-Keitai compatible service, you need to download the Osaifu-Keitai compatible i-αppli program from the Osaifu-Keitai compatible site※2 (in Japanese only) to make the settings.※1 You can use Omakase Lock and IC Card Lock. (See page 125 and page 316)※2iMenu→メニューリスト (Menu List)→おサイフケータイ (Osaifu-Keitai)≥Data on the IC card (including electronic money, reward points, etc.) might be lost or deformed owing to the malfunction of the FOMA terminal. (When we keep your FOMA terminal for repair, we cannot keep it with data files left, so the data files shall be deleted beforehand by yourself as a rule.) For supports such as reissue, restoration, temporary storage, or transfer of data files, consult the service provider which supports Osaifu-Keitai, except for the data transfer by iC transfer service. For your important data files, be sure to use the service with backup support.≥In any case including malfunction or model change, we cannot be held responsible for the loss or deformation of data on the IC card or other losses caused regarding Osaifu-Keitai compatible services.≥If your FOMA terminal is stolen or lost, inquire of the provider for Osaifu-Keitai compatible service you use about ways of dealing with the trouble, immediately.Osaifu-KeitaiiC transfer service※1 is the service for moving※2 a package of data files※3 on the IC card of your Osaifu-Keitai to your new Osaifu-Keitai when you replace your Osaifu-Keitai such as at the time of phone model change or malfunction. After moving data files on the IC card, just download※4 an Osaifu-Keitai compatible i-αppli program, and then you can use the Osaifu-Keitai services continuously. iC transfer service is available at the service counters such as a nearby docomo shop.For details on iC transfer service, refer to “Mobile Phone User’s Guide [i-mode] FOMA version”.※1 Both the transferring end and transferred end have to be the FOMA terminal that supports iC transfer service. Visit a nearby counter such as a docomo shop to use iC transfer service.※2 This service is not for “copying” but for “moving” data files, so no data files on the IC card remain in the FOMA terminal at the transferring end. iC transfer services is not available for some cases, so use backup services for Osaifu-Keitai compatible services.※3 Some Osaifu-Keitai compatible services do not cover iC transfer service, and you can move only the files on the IC card of the Osaifu-Keitai compatible service that covers iC transfer service.※4 You are charged a packet communication fee for downloading i-αppli programs and respective settings.iC Transfer Service](https://usermanual.wiki/Panasonic-Mobile-Communications/208012A.User-Manual-Part-2/User-Guide-1045204-Page-104.png)
![316Osaifu-Keitai/ToruCaTo prevent the IC card function from being used by others, you can set the Osaifu-Keitai, received ToruCa, or iC communication disabled.≥If the battery runs out while IC Card Lock is set, the IC card stays locked.1Press and hold m for at least one second.“ ” appears and IC Card Lock is set.≥To release IC Card Lock, perform the same operation and enter your Terminal Security Code. When Timer Lock ON At Close is set, the display for releasing IC Card Lock appears also by opening the FOMA terminal.When you set “PIM/IC security mode” to “Face reader”, follow the operation of “Use Face Reader to Release Lock” on page 130.When you set it to “Double security”, enter your Terminal Security Code after the operation on page 130.You can set whether to lock the IC card function while the power is turned off.1m1Set./Service1Lock/Security1Lock settingorm1Osaifu-Keitai1IC card lock set.2IC lock (power-off)1Enter your Terminal Security Code1Select an item.Setting before OFF . . . . Follows the setting just before turning off the power.Lock . . . . . . . . . . . . . . . . Sets IC Card Lock.<IC Card Lock>Locking IC Card FunctionIC Lock (Power-off)You can check whether IC owner information required for using the IC card is consistent with the information of the currently inserted UIM.1m1Osaifu-Keitai1Check IC owner≥When the UIM differs from the stored one, select “Change” and reset the data on the IC card, and then you can newly store the UIM information. You can reset the IC owner information by deleting data on the IC card. After resetting, you can newly register information of currently inserted UIM.≥When you initialize the IC owner information, the Osaifu-Keitai compatible i-αppli programs except “iD 設定アプリ (iD Setting Application)” are deleted. However, they might not be deleted depending on your usage state, so you need to delete them separately.1m1Osaifu-Keitai1Change IC owner1Reset1YES1Enter your Terminal Security Code1YESToruCa is an electronic card that you can receive with Osaifu-Keitai for use as fliers, restaurant cards, and coupon tickets. You can receive ToruCa files from scanning devices or sites and can easily exchange them using mail, infrared ray, or a microSD card.The received ToruCa files are saved to “ToruCa” of “Osaifu-Keitai”.≥For details on ToruCa, refer to “Mobile Phone User’s Guide [i-mode] FOMA version”.<Check IC Owner>Checking Owner Information of IC CardChange IC Owner<ToruCa>ToruCa](https://usermanual.wiki/Panasonic-Mobile-Communications/208012A.User-Manual-Part-2/User-Guide-1045204-Page-106.png)
![320Osaifu-Keitai/ToruCaInformation<Auto-sort>≥“ ” is displayed when the Genre sort is set, “ ” is displayed when the Title sort is set, and “ ” is displayed when the Index sort is set.≥When a file satisfies multiple conditions, it is sorted into the top of the folder in the ToruCa Folder list.<Copy to microSD>≥The ToruCa file (details) is copied as a ToruCa file before receiving details if it contains the data file with the UIM security or whose output from the FOMA terminal is prohibited.<CPY all to microSD>≥The ToruCa files in the “ToruCa” folder within the FOMA terminal are saved to “SD ToruCa” on the microSD card.<Copy all to phone>≥The ToruCa files in “SD ToruCa” on the microSD card are added or overwritten and then saved to the “ToruCa” folder in the FOMA terminal.<Select storage>≥“ ” is displayed for the folder set as a destination.≥When you execute Check microSD, or create or edit a folder by using a personal computer, the destination folder on the microSD card might be changed. When the setting is changed, set the destination folder again.1State of ToruCa file※1 Does not apply to the ToruCa file downloaded from a site.※2 Appears for only the ToruCa file on the microSD card.≥“ ” is added to the expired ToruCa file.≥“ ” is added to the ToruCa file whose output from the FOMA terminal is prohibited.2CategoryDisplays a category icon that matches the contents of the ToruCa file.3Index fileDisplays the location data of the publisher of the ToruCa file information.4Title5Date and time the ToruCa file was received6ToruCa informationSummary and the “詳細 (Details)” key are displayed for a ToruCa file. Publisher information is displayed for a ToruCa file (details).How to See ToruCa File List/Detailed ToruCa File Display124246335ToruCa File listDetailed ToruCa File display(for ToruCa file)Detailed ToruCa File display[for ToruCa file (details)]6243 5※1Unread ToruCa fileRead ToruCa fileUsed ToruCa file※2FOMA terminal incompatible ToruCa file](https://usermanual.wiki/Panasonic-Mobile-Communications/208012A.User-Manual-Part-2/User-Guide-1045204-Page-110.png)
![321Osaifu-Keitai/ToruCaFunction Menu of the ToruCa File List/Detailed ToruCa File DisplayAttach to mail You can compose an i-mode mail message with the ToruCa file attached.Go to step 2 on page 142.≥You can compose it also by pressing l().Move 1Select a destination folder.≥You cannot select the “Used ToruCa” folder.Search/sortSearch[List only]You can search through ToruCa file in the folder by specifying a search condition.1Select a search condition.Genre. . . .Select a genre.Press l( ) to display a list of category icons belonging to the genre.Title . . . . .Enter characters to be searched for, from those in the title.Index . . . .Enter characters to be searched for, from those in location data.≥You can enter up to 20 full-pitch/40 half-pitch characters for the Title search, and up to 10 full-pitch/20 half-pitch characters for the Index search.Sort[List only]You can change the order of displayed files.1Select an order.CopyCopy You can copy the displayed or highlighted ToruCa file to another folder.1Select a destination folder.≥You cannot select the “Used ToruCa” folder.Copy to microSD The files are copied to the folder as specified by “Select storage” on page 319.Copy to phone You can copy the ToruCa file from the microSD card to the ToruCa folder in the FOMA terminal.Connect to Center[List only]See page 136.ToruCa folders[List only]You can display the ToruCa folder list.≥You can display it also by pressing c().Multiple-choice[List only]You can select multiple ToruCa files and operate them.1Put a check mark for ToruCa files to be selected1i()1Select an item.Move . . . . . . . . . . . . . See page 321.Copy. . . . . . . . . . . . . . See page 321.Copy to microSD . . . See page 321.Copy to phone . . . . . See page 321.Send Ir data. . . . . . . . See page 384.Select all . . . . . . . . . . Selects all files.Release all. . . . . . . . . Releases all selections.Update ToruCa[Detailed display only]You can re-receive the information about the ToruCa file. The re-received ToruCa file (details) is automatically overwritten and then saved.1YES≥You cannot update some ToruCa files.≥See page 201 when ToruCa files are stored to the maximum.Operate imageSave one image[Detailed display only]You can save an image displayed on the ToruCa file.1Select an imageGo to step 2 on page 199.Save some images[Detailed display only]You can save multiple images displayed on the ToruCa file.1Put a check mark for images to be saved1l()Go to step 2 on page 199.Save all images[Detailed display only]Among the images displayed on the ToruCa file, you can save all the images that can be saved at one time.Go to step 2 on page 199.Save BG image[Detailed display only]You can save the background image of the ToruCa file and set it for the Stand-by display or Wake-up display.Go to step 2 on page 199.](https://usermanual.wiki/Panasonic-Mobile-Communications/208012A.User-Manual-Part-2/User-Guide-1045204-Page-111.png)
![322Osaifu-Keitai/ToruCaRetry[Detailed display only]You can play back an animation image or Flash movie in the ToruCa file from the beginning.≥When a part of the Flash movie is outside the display area, the Flash movie might not be played back.Add to phonebook[Detailed display only]See page 92.Add desktop icon See page 31.Ir/ transmissionSend Ir data See page 384. transmission See page 387.Memory info[List only]You can display the used memory space (estimate)/the number of saved files.DeleteDelete this[List only]1YESDelete selected[List only]1Put a check mark for ToruCa files to be deleted1l()1YESDelete all[List only]You can delete all ToruCa files in the folder.1Enter your Terminal Security Code1YESDelete[Detailed display only]1YESInformation<Attach to mail>≥The ToruCa file (details) that contains data whose output from the FOMA terminal is prohibited is attached as a ToruCa file before receiving details.≥You might not be able to attach the ToruCa file to i-mode mail depending on its file size.<Copy>≥You cannot copy ToruCa files whose output from the FOMA terminal is prohibited.<Copy to microSD>≥The ToruCa file (details) is copied as a ToruCa file before receiving details if it contains the data file with the UIM security or whose output from the FOMA terminal is prohibited.≥When the number of files in the destination folder on the microSD card is full, a new folder is automatically created and ToruCa files are saved to that folder.When copying is completed, the message “Storage is changed to XXXXXXXX” (XXXXXXXX denotes a folder name) appears.≥The name of copied ToruCa file is TORUCXXX (XXX denotes a numeral).≥When no folder is set as a destination folder on the microSD card, a new folder is created automatically and the file is saved to the folder. After saving, the newly created folder is set as the destination folder.≥You might not be able to execute “Copy to microSD” for the ToruCa file depending on its file size.<Copy to phone>≥You might not be able to execute “Copy to phone” for the ToruCa file depending on its file size.<Operate image>≥The image satisfying the following conditions is saved as a frame or stamp:・Transparent GIF file (except animation GIF file)・The file extension is “ifm”.・Images of Stand-by (480 x 854) or smallerImages of Stand-by (480 x 854), VGA (480 x 640), CIF (288 x 352), QVGA (240 x 320), QCIF (144 x 176), or Sub-QCIF (96 x 128) are saved as frames, and other images are saved as stamps. Information](https://usermanual.wiki/Panasonic-Mobile-Communications/208012A.User-Manual-Part-2/User-Guide-1045204-Page-112.png)
![329Map/GPS Function◆When 60 days have passed without registering yourself as a memberAt the first start-up on or after 61 days, the message telling that the functions you can use are limited, and the message that refers to the member registration appear.The same messages appear when you select an optional service menu.※To register yourself as a member, access “ゼンリン 地図＋ナビ (ZENRIN/map+navi)” via this software program.■Map display and its operation◆Key operation when the map is shown© 2008 ZENRIN DataCom CO., LTD.Map View displayKey operation Actionl(TOP) Can show the TOP menu.Oo[メニュー (Menu)] Can show the quick access menu.i[縮小(Reduce)] Can reduce the scale by pressing and holding the key to show a large area.c[拡大(Enlarge)] Can enlarge the scale by pressing and holding the key to show the details.MoCan move the map up, down, left, and right.◆Key operation when the quick access menu is shown■The Search Result display for area information and its operation≥The display and operation are for when you show the search result on the map, not for when you select it from the list.◆The Search Result display for area informationrCan close the menu or return to the point retrieved by the first search.aCan turn the map counterclockwise.0Can turn the map northward.sCan turn the map clockwise.Key operation ActionKey operation ActionZo[周辺検索(Check area information)]Can check area information of the place displayed on the map.Xo[ココへナビ(Navigate to this place)]Can set the start point and search for a route to the center of the map.Co[トーク 送信(Talk Send )]≥Can call up friends to show them on the map.≥Can send the URL of the displayed map by mail.Vo[ココを登録(Store this place)]Can store the location information on the center of the map in this software program, on the server, or in the Phonebook. When you store it on the server, the stored point can be shared with your personal computer as well.Oo[詳細 (Details)] Can check the detailed information.© 2008 ZENRIN DataCom Co., LTD.](https://usermanual.wiki/Panasonic-Mobile-Communications/208012A.User-Manual-Part-2/User-Guide-1045204-Page-119.png)
![330Map/GPS Function◆Key operation when the Search Result display for area information is shownYou can set a start point and destination, and search for a route. The routes you can go through on foot, by public transportation, or by car are displayed. After you search for the route, the voice and display navigate you to your destination.1TOP menu display1ナビ Navigation1ナビをする (Navigate)Key operation ActionOoCan show the quick access menu.MoCan move the map up, down, left, and right.1Can display the previous 10 results.3Can display the next 10 results.4Can show the previous search result.5Can re-search the area centered on the displayed map.6Can show the next search result.l(TOP) Can show the TOP menu.i[縮小(Reduce)] Can reduce the scale by pressing and holding the key to show a large area.c[拡大(Enlarge) Can enlarge the scale by pressing and holding the key to show the details.Searching for a Route and Navigating Yourself to Destination by Voice and Display2出発地 (Start point)1Select a setting method.現在地（GPS） [Current location (GPS)]. . . . Set a start point by measuring the current location.フリーワード検索 (Keyword search). . . . . . Set a start point by searching by keywords.地図上で指定 (Specify on map). . . . . . . . . . . Set a start point on the map.TEL／〒検索 (TEL/ZIP code search) . . . . . . Set a start point by searching by a phone number or zip code.住所一覧から (From address list) . . . . . . . . . Set a start point by selecting an address.ジャンルから (From genre) . . . . . . . . . . . . . . Set a start point by selecting a genre.履歴から (From record). . . . . . . . . . . . . . . . . . Set a start point on the map previously searched.登録地点から (From stored point). . . . . . . . . Set a start point from the location information stored in this software program, on the server, or in the Phonebook.自宅 (Home). . . . . . . . . . . . . . . . . . . . . . . . . . . . Set a start point from the location information of your home.出発地の確認 (Confirm start point). . . . . . . . Confirm information about the start point.3目的地 (Destination)1Select a setting method.フリーワード検索 (Keyword search) . . . . . Set a destination by searching by keywords.地図上で指定 (Specify on map) . . . . . . . . . . Set a destination on the map.TEL／〒検索 (TEL/ZIP code search). . . . . . Set a destination by searching by a phone number or zip code.住所一覧から (From address list) . . . . . . . . Set a destination by selecting an address.ジャンルから (From genre). . . . . . . . . . . . . . Set a destination by selecting a genre.履歴から (From record) . . . . . . . . . . . . . . . . . Set a destination on the map previously displayed.登録地点から (From stored point). . . . . . . . . Set a destination from the location information stored in this software program, on the server, or in the Phonebook.自宅 (Home) . . . . . . . . . . . . . . . . . . . . . . . . . . . Set a destination from the location information of your home.目的地の確認 (Confirm destination) . . . . . . Confirm information about the destination.4時間指定 (Specify time)1Select an item.現時刻で指定 (Specify by current time). . . Search for a route by the current time.出発時刻指定 (Specify start time). . . Search for a route by specifying the start time.到着時刻指定 (Specify arrival time). . . Search for a route by specifying the arrival time.終電を利用 (Use last train). . . Search for a route by the last train of the day.](https://usermanual.wiki/Panasonic-Mobile-Communications/208012A.User-Manual-Part-2/User-Guide-1045204-Page-120.png)