Panasonic Mobile Communications 208014A UMTS/ GSM Cellular Mobile with Bluetooth® and RFID User Manual 000 P 07A

Download:
Mirror Download [FCC.gov]
Document ID	1093085
Application ID	yeF5gtcNQtz4Did9a6OJfg==
Document Description	User Manual 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	291.14kB (3639196 bits)
Date Submitted	2009-04-08 00:00:00
Date Available	2009-06-12 00:00:00
Creation Date	2009-04-06 11:03:34
Producing Software	Acrobat Distiller 8.1.0 (Windows)
Document Lastmod	2009-04-06 11:03:47
Document Title	000.P-07A.book
Document Creator	FrameMaker 7.2
Document Author:	Administrator

Information
Obtain a Program Manually
“
” appears on the desktop when the automatic program acquisition
fails or the program is not updated even after the program distribution
date. When the automatic acquisition fails, you can manually obtain the
program.
Music&Video Channel displaySelect a programYES
For a partially obtained program, select “Play” to play it back.
For a program which has not been updated, select “Play” to play it back.
See page 210 when data files are stored to the maximum.
Information
When obtaining of a program is suspended, the part of the program obtained up to
that point is saved. To obtain remaining part, you can manually obtain it except in
some time zones. When a program has been updated or switched to another
program, obtaining starts not from the suspended point but from the beginning.
You cannot re-obtain the program whose playable deadline has expired. Such a
program cannot be updated until the next distribution date.
You may not be able to manually obtain programs depending on the time zone.
Music
You cannot copy or save the obtained program to the microSD card.
To set programs, you need to register the site which offers Music&Video Channel
programs to your My Menu. (See page 195)
If you have not subscribed to Music&Video Channel, select “About this service” to see
the Music&Video Channel introduction page.
When the programs could not be obtained due to “power off” or “low battery” at the
start time of program obtaining, re-obtaining is performed at night of the following day.
It may take a time to obtain programs, so fully charge the battery and operate in the
good radio wave conditions.
You cannot perform the setting operation and automatic obtaining of the program
selected on the Music&Video Channel display or the program in use.
When you cancel Music&Video Channel, the programs other than those moved by
“Move program” are deleted.
If you insert a UIM which is different from the one you used to set programs, programs
cannot be automatically obtained. Set the programs again from the Music&Video
Channel display.
When you select a service menu for Music&Video Channel, the message “Confirm
set up information?” appears. If you select “YES”, the programs that have been
distributed might be deleted. However, they will not be deleted while the distribution is
set to be halted.
If you insert the UIM of the FOMA terminal that you have been set for programs into
another Music&Video Channel compatible FOMA terminal, the programs cannot be
obtained automatically. Select “Set program” again from the Music&Video Channel
display to automatically update the program setting on the FOMA terminal, then the
programs can be obtained automatically.
Check/Cancel the Set Program
Music&Video Channel displaySet program
Follow the instructions on the display.
You can check or cancel the set program. For details, refer to “Mobile Phone
User’s Guide [i-mode] FOMA version”.
Information
Even if the setting of a program is canceled, My Menu is not deleted.
271
Playing/Operating Programs
You can enjoy playing back programs in stereo sound by connecting to the Stereo
Earphone Set (option). Also, you can enjoy playing back programs wirelessly by using
a commercial Bluetooth device. (See page 424)
Music
mMUSICMusic&Video Channel
Select a program.
“
” is displayed while Music&Video Channel is
activated, and “
” is displayed when the program
shifts to pause state during Play Background.
When a program is highlighted, the next distribution
date is displayed under the program name. It is not
displayed when the program distribution is suspended.
It might not be displayed when the automatic program
obtaining fails.
When information of the previously played program
exists, playback starts from the position and/or in the
Music&Video
mode accordingly.
Channel display
 Highlight a program and press l(
); then the
Chapter list is displayed.
Highlight a program and press m(
) to connect to the URL of the
program URL information.
 The images on the right are displayed
when you cannot display a preview
image:
Obtaining Unplayable No preview
program
image
images
When you press and hold p for at least one second or press h during
playback or pause, playing back program ends.
Operate Music&Video Channel from Data Box
You can play back programs also from Data Box. From Data Box, you can
play back currently distributed programs as well as the programs that
have been distributed in the past and moved to the “Saved program”.
mData boxMusic&Video Channel
Downloaded program or Saved program
Select a program.
You can switch display
format each time you press
c(
) from the
Program list.
Program Folder list
Program list
■About Music&Video Channel Playback display
…Program image or program video
(When no images are stored, an animation
appears.)
…Chapter number/Number of chapters
…Chapter name/Artist name
…Program name
…Playback state
…Playback time/Total playback time
…Play mode (No indication for “Normal”)
: Repeat
…Equalizer
: Normal
: H.BASS2
: H.BASS1
: Train
…Stereo/Monaural
: Stereo
272
: Monaural
 
 
…Listening (No indication for “OFF”)
: Surround
: Natur1
: Natur2
…Icon of Bluetooth connection (No indication for not connected)
: Being connected
…Sound volume
■Operation while playing back a Music&Video Channel program
Operation
Key operation
Halt
l(
Pause
Oo(
) or p
Oo(
Sound volume
adjustment
Operation
Equalizer
…Remaster (No indication for “OFF”)
: ON
) or p to play back
Bo or 
※ You cannot operate during pause.
From the Music&Video Channel Playback display, you can do the following
operations by using the switch of an earphone/microphone (option):
Operation
Press once.
To play back, press again.
Replay next
chapter
Press twice in succession.
Replay previous
chapter
Press three times in succession.
When playback time is over three seconds or no previous
chapter is found, you go back to the beginning of the file.
Search
(fast forward)※
Press and hold Vo.
Search
(fast rewind)※
Press and hold Co.
Connect to site
m(
Switch vertical
display/horizontal
display
c(
Each time of pressing switches in order of playback on the
vertical display → playback on the horizontal display fitted to
the display size → playback on the enlarged full display.
■Icons on the Music&Video Channel display/the Program list
The icons on the Music&Video Channel display indicate the download status.
Icon
Description
Music
Co or <(for at least one second)
When playback time is over three seconds or no previous
chapter is found, you go back to the beginning of the file.
Switch operation
Pause
Replay next chapter Vo or >(for at least one second)
Replay previous
chapter
Key operation
Each time of pressing switches in order of “Normal” →
“H.BASS1” → “H.BASS2” → “Train”.
Successfully obtained program
Broken program
Partially obtained program or unsuccessfully obtained program
Display next image 3
Display previous image 1
Remaster
Each time of pressing switches between “ON” and “OFF”.
Listening
Each time of pressing switches in order of “OFF” → “Surround”
→ “Natur1” → “Natur2”.
“
” is added to the newly obtained program.
Some programs have restrictions on the number of playbacks, playable deadline, or
playback period. “ ” is added to the icon of the program with playback restrictions and
“ ” is added to the icon of the program with restrictions expired. You can check the
playback restrictions for the program by “Program info”.
Some programs have restrictions on operation. “ ” is added to the icon of the
program with operation restrictions.
Depending on the program, its playable time zone is fixed. “ ” is added to the icon of
the program with time zone restrictions. The time follows the time information obtained
from the network.
When obtaining a periodically-updated program fails, “ ” appears to tell the program
has not been updated. “ ” disappears when obtaining the program starts.
The file restriction is set to all the Music&Video Channel programs. See page 244 for
the file restrictions.
273
Music
Information
The information of the previously played program is erased if you do the following
operations:
ｼ When you turn on/off the FOMA terminal
ｼ When you update the program
ｼ When you delete or move the previously played program
If you try to play back a program with a low battery, the confirmation display appears
asking whether to play it back. The battery alert tone sounds regardless of the setting
of “Keypad sound”. When the battery becomes low during playback (including during
Play Background), the playback pauses, and the confirmation display appears asking
whether to end the playback.
In the following cases, playback pauses and resumes after you finish each operation:
ｼ When you make/receive a voice call, videophone call, or PushTalk call
･ When you receive a mail message or Message R/F while “Receiving display” is set
to “Alarm preferred” or the Stand-by display is shown
･ When an alarm of “Alarm”, “Schedule”, “ToDo”, “TV timer” or “Timer recording”
sounds
Depending on the function which occurred, the confirmation display might appear
asking whether to end the Music&Video Channel program.
If a black display appears after you play back a program with time zone restrictions,
playback starts at the next playable time zone.
If you playback a program in countries other than Japan, the playable deadline might
expire before or after the displayed deadline.
On the full display, you cannot play back the audio-only music programs and video
programs of QCIF (176 x 144) or smaller.
Function Menu of Music&Video Channel Display/Program
Folder List/Program List
Chapter list
274
You can display the list of chapters set for the program. Select
a chapter to play back the selected chapter and afterward.
Press i(
) and select “Chapter info” to display the
information about the chapter title, playback time, etc.
Play mode setting
Normal or Repeat
Normal . . .Plays back the program once in the order of the
chapters.
Repeat. . . .Plays back the program repeatedly in the order of
the chapters.
Program info
You can display the program title, distribution source,
playback restrictions, etc.
Move program
Programs currently distributed are updated to new programs
on the next distribution date. You can save the current
programs by moving them to the “Saved program” folder
before the distributed program is updated. You can check
“Memory info” for unused memory space you can save to.
You can save up to 10 programs sharing the memory space
with other data files, however, the number of programs you
can save decreases depending on the data volume. (See
page 534)
YES
See page 210 when programs are stored to the maximum.
Set desktop/
key
Add desktop icon
See page 32.
long press set. See page 410.
Edit title
Enter a title.
You can enter up to 31 full-pitch/63 half-pitch characters.
Reset title
You can reset the title to the default.
YES
Multiple-choice
You can select and delete multiple programs stored in “Saved
program” folder.
Put a check mark for programs to be deleted
i(
)DeleteYES
Connect to URL
You can access the URL when the program has the URL
information.
YES
Display image
You can display the program images stored in the program.
Press r to return to the list.
Memory info
You can display the used memory space (estimate).
You can display them also by pressing c(
).
Delete/Delete this
You can delete the program.
YES
Delete all
You can delete all the programs stored in the “Saved
program” folder.
Enter your Terminal Security CodeYES
Listening
You can set the effect of the sound from an earphone or
Bluetooth device.
Select an item.
Surround . . . .Makes the sound natural and stereophonic.
Natur 1/2 . . . .Complements the cooped-up feeling specific to
earphones and plays back natural sound.
Select 1 or 2 according to your taste.
OFF . . . . . . . .Sets Listening to “OFF”.
Equalizer
You can change the quality of the sound from an earphone or
Bluetooth device.
Select an item.
Normal . . . . . Reproduces normal sound quality.
H.BASS1 . . . Enhances bass sound.
H.BASS2 . . . Enhances bass sound more deeply than
H.BASS1.
Train. . . . . . . Minimizes abnormal sound that causes sound
leakage.
Information

The playable mode setting is invalid for the programs having the time zone
restrictions.
Even if you set to “Repeat”, the program is not played back repeatedly if it has no time
zone restrictions but has restrictions on the number of playbacks.

You cannot move the program when its obtaining is not completed, or the move
restriction or time zone restriction is set for the program.

When the next program is delivered, the edited title is overwritten by the new title.
  
Even when you delete the program, the program setting is not released.
See page 274.
Chapter info
You can display the title, play time, etc. of the chapter currently
played back.
Connect to URL
See page 274.
Chapter list
See page 274.
Previous image
You can display a previous image.
Play mode setting
See page 274.
Next image
You can display a next image.
Music
Function Menu during Playback/Pause
Program info
Sound effect
Remaster
You can bring the sound from an earphone or Bluetooth
device to the original sound by complementing high-pitch
range lost at data compression.
ON or OFF
Information

Even if an earphone or Bluetooth device is not connected, the respective setting
contents are displayed on the display.
 
You can display up to three images, however, you may not be able to display them
depending on the program.
275
Playing Music
You can play back music files on your FOMA terminal by using MUSIC
Player or i-motion player.
■MUSIC Player (See page 278)
By “MUSIC Player” of “MUSIC”, you can play back Chaku-uta Full® music files or music
files saved from music CDs to the microSD card via a personal computer.
You can display mail, i-mode sites, and so on, while listening to music by MUSIC
Player (Play Background).
See page 505 for the combination patterns that can be started.
■i-motion Player (See page 348)
From the “imotion” folder in “Data box”, you can play back the voice-only i-motion file
(including music data of AAC format) or AAC format files stored on the microSD card.
Saving Music Files
Download Chaku-uta FullÂŽ Music Files
Music
You can download Chaku-uta FullÂŽ music files from sites. You can save
up to 250 Mbytes of files including other data files. (See page 530)
Call up a Chaku-uta FullÂŽ music file downloadable site
Select a Chaku-uta FullÂŽ music fileSaveYES
Select “Play” to play back the Chaku-uta Full® music file. See page 281 for
operations while a Chaku-uta FullÂŽ music file is being played back.
Select “Property” to display the Chaku-uta Full® music file information. (See
“Music info” on page 284)
See page 210 when Chaku-uta FullÂŽ music files are stored to the maximum.
Select a destination folder.
Press l(
) to display folders at the second-tier level or lower, if they
exist. Press r to return to the upper level.
276
When downloading Chaku-uta FullÂŽ music file is suspended
When you press l(
) to suspend downloading or when the downloading is
suspended by an incoming call, the confirmation display appears asking whether to
resume downloading. Select “YES” to resume downloading the remaining part. Select
“NO” to show the data acquisition completion display. Select “Save pt.” to save it to a
folder in “i-mode” folder in “MUSIC” in “Data box”.
You can re-download the rest of the partially saved file from “Data box”.
The title name of the partially saved Chaku-uta FullÂŽ music file takes the date and time
when it is downloaded.
When the playable period or playable deadline of the partially saved Chaku-uta FullÂŽ
music file has expired, you cannot download the remaining segments of the file.
Further, the partially saved file is deleted when you save re-obtained data.
About Uta-hodai
Uta-hodai files are the Chaku-uta FullÂŽ music files you can play back just for a period of
the contract with a content provider. The playable deadline is specified in the license
information that is downloaded together with the music file.
Even when the playable deadline has expired, you can play back the music file by
updating the license.
When a music file (Chaku-uta FullÂŽ music file downloaded on the membership service
basis) whose playable deadline has expired is found at the start of MUSIC Player, the
confirmation display appears asking whether to update the playable deadline. Select
“YES” to update the file (Packet communication fee is charged). Select “NO” not to use
the music file. See page 279 for starting MUSIC Player.
Some Uta-hodai music files are applied with surplus playable days even after the
playable deadline has passed. During this period, you can play back files without
updating the playable deadline information. When the surplus playable days are over,
you cannot play back the files. Also if you download a music file with playable period
not updated, you cannot play it back before it is saved.
When the upper limit of the (membership) music services you can register is exceeded,
the confirmation display appears asking whether to overwrite them. Select “YES” to
overwrite a music service whose playable deadline is the oldest. You can no longer
play back the music files downloaded from the overwritten service.
Packet communication fee for updating the playable deadline during international
roaming is not supported by Pake-hodai, Pake-hodai full, and Pake-hodai double.
Information
You can save up to 5 Mbytes per Chaku-uta FullÂŽ music file.
When the Uta-hodai music file set for the ring tone or alarm tone needs to be updated
because the playable deadline has expired, the default tone sounds when a call
comes in, or an alarm sounds/vibrates.
For a Chaku-uta FullÂŽ music file that has restrictions on the number of playbacks,
playable period, or playable deadline, “
” is displayed at the head of the title. If you
remove the battery and keep it aside for a long time, the date/time information in the
FOMA terminal might be reset. In that case, you cannot play back the Chaku-uta FullÂŽ
music file that has restrictions on the playable period or playable deadline. See “Music
info” for checking the playback restrictions.
Partially saved Chaku-uta FullÂŽ music files cannot be played back from Data Box.
Save WMA Files
You can use Windows Media Player 10/11 to save Windows MediaÂŽ
Audio (WMA) files from a personal computer to the microSD card.
You can save up to 1000 WMA files.
As well as music files, you can save playlists, jacket images, and license keys.
Prepare devices required for saving WMA files
P-07A
microSD card
FOMA USB Cable with Charge Function 01/02 (option)
Personal computer with Windows Media Player 10 (10.00.00.3802 or later)/11 installed
ｼWhen you use Windows Media Player 10/11 in Windows XP, use Windows XP
Service Pack 2 or later. When you use Windows Vista, use Windows Media Player 11.
Before connecting the FOMA terminal to a personal computer, you need to check the
version of Windows Media Player.
Use the FOMA terminal as reader/writer
Set “USB mode setting” to “MTP mode”. (See page 376)
Save music files to the microSD card
You cannot save WMA files to the FOMA terminal.
For how to operate Windows Media Player 10/11, refer to Help for Windows Media
Player 10/11.
When you finish saving, remove the FOMA USB Cable with Charge Function 01/02
from the FOMA terminal.
When you remove the FOMA USB Cable with Charge Function 01/02, remove it after
finishing the software in use.
About the NapsterÂŽ Application
You have the ability to save music files using the NapsterÂŽ application.
Please download the NapsterÂŽ application from the following website (in Japanese
only):
http://www.napster.jp/
If you have any questions about the NapsterÂŽ application, refer to the following website
(in Japanese only):
http://www.napster.jp/support/
Information
Do not remove the microSD card during saving a file. You may lose the file.
Music files and jacket images are saved to /PRIVATE/DOCOMO/MMFILE/WM/ on
the microSD card.
The WMA files saved to the microSD card using another FOMA terminal might not be
recognized by the P-07A. Further, the files might not be recognized by the P-07A
even when it is connected to the personal computer with “USB mode setting” set to
“MTP mode”.
In that case, delete “WM” folder and “WM_SYSTEM” folder on the microSD card by
using your personal computer, or format the microSD card (see page 375). Note that
not only music files but also all the other files are deleted when the microSD card is
formatted.
When unused memory space on the microSD card becomes less than 300 Kbytes,
the card might not be recognized by a personal computer. Check the unused memory
space on the microSD card and delete unnecessary data files if unused memory
space is 300 Kbytes or less. Then connect to the personal computer after setting
“USB mode setting” to “MTP mode” again.
277
Music
First, prepare the devices required for saving WMA files.
Start Windows Media Player 10/11 and save WMA files to the microSD
card.
Save Music Files by Using SD-Audio
By using SD-Jukebox (commercial item), you can save the music files on
the music CDs to the microSD card as AAC format data.
By using the microSD card adapter (option), you can save music files to the microSD
card directly from a personal computer as well.
※The following steps are an example for when the FOMA terminal is used as a
microSD reader/writer for saving music files.
About SD-Jukebox
You can purchase SD-Jukebox from the following website (in Japanese only):
http://club.panasonic.jp/mall/sense/
For details about operating environments, refer to the following website (in Japanese
only):
http://panasonic.jp/support/software/sdjb/
Prepare devices required for saving music files
Music
First, prepare the devices required for saving music files.
P-07A
microSD card
FOMA USB Cable with Charge Function 01/02 (option)
Personal computer (Windows XP, Windows 2000, or Windows Vista)
SD-Jukebox (commercial item)
Music CD you want to save
Install SD-Jukebox
Install SD-Jukebox on the personal computer.
Use the FOMA terminal as reader/writer
Set “USB mode setting” to “microSD mode”. (See page 376)
278
Save music files to the microSD card
Start SD-Jukebox and set a music CD on the personal computer. Then
use SD-Jukebox to save music files to the microSD card.
For how to operate SD-Jukebox, refer to Help for SD-Jukebox.
When you finish saving, remove the FOMA USB Cable with Charge Function 01/02
from the FOMA terminal.

Using MUSIC Player
You can play back Chaku-uta FullÂŽ music files obtained from sites or
music files saved to the microSD card.
To play back music files, select “MUSIC Player” from “MUSIC” on Main
Menu. Play Background is available so that you can use mail functions,
display sites, and so on, while listening to music.
To manage folders or data files, select “MUSIC” from “Data box” on Main
Menu.
Note that battery consumption will be faster when you use MUSIC Player.
You can enjoy playing back music in stereo sound by connecting to the Stereo
Earphone Set (option). Also, you can enjoy listening to music wirelessly by using a
commercial Bluetooth device. (See page 424)
If the number of stored files increases, it may take long to start MUSIC Player.
For details on MUSIC Player, refer to the DOCOMO website.
1
The Player Menu display appears.
When the information of the previously played music file
Player Menu display
remains, the playback starts at the position and in the
mode according to the information. You can play back also by pressing and
holding p for at least one second with the FOMA terminal closed.
Select an item.
All tracks. . . Displays all the music files saved on the FOMA terminal and
microSD card.
Artist . . . . . . Displays all the artist names.
Highlight the name of the artist you want to listen to and press
Oo(
), then all the album names of the selected artist are
displayed. (Go to Album)
Album . . . . . Displays all the albums.
Highlight the name of the album you want to listen to and press
Oo(
).
Genre. . . . . . Displays all the genres.
Highlight the genre you want to listen to and press Oo(
).
Playlist. . . . . Displays all the playlists created by the FOMA terminal and personal
computer.
See page 287 for the playback of playlists.
Select a music file.
Playback starts from the selected music file in the order listed on the Type list or
playlist. “
” is displayed while MUSIC Player is activated, and “
” is
displayed when the music shifts to pause state during Play Background.
The “★” mark is added to the music file which is currently played back or was
previously played back.
Press and hold p for at least one second during playback, pause, or halt, or
press h to end MUSIC Player.
When you press m(
) or r during playback, the former Music list is
displayed.
279
Music
The “★” mark is added to the
playlist which is being played
back or was previously played
back.
When you select “Artist”,
“Album”, or “Genre”, and press
l(
) from the Type list,
all the music files stored in the
selected item are played back.
You can switch display format
each time you press
c(
) from the Music
list.
Type list
Music list
When “
” is displayed on
(For Artist)
the Type list or the Music list,
you can display the playback display of previously played back music file or
music file in-play by pressing m(
).
You might not be able to display all the stored music files depending on their file
size.
The images on the right are displayed
when you cannot display a preview
image:
Incomplete Cannot be No image,
download
displayed
etc.
Play Back Music Files
Press and hold p for at least one
second.
3
Manage Folders or Music Files
mData boxMUSIC
Music Folder list
Music
Select an item.
MUSIC Player. . . MUSIC Player starts. (See page 279)
i-mode. . . . . . . . . Displays the i-mode (Chaku-uta FullÂŽ) Folder list. Select a folder.
WMA . . . . . . . . . . Displays the WMA list.
Each time you press m
from the i-mode (Chaku-uta
FullÂŽ) Folder list, you can
switch between the folders
in the FOMA terminal and
the microSD card.
You can switch display
format each time you press
c(
) from the
Chaku-uta FullÂŽ Music list
and WMA list.
See page 279 when you
cannot display a preview
i-mode (Chaku-uta
Chaku-uta FullÂŽ
image.
FullÂŽ) Folder list
Music list
See page 209 when you
select “Search by i-mode”.
Some WMA files have playable license (number/period/
deadline).
Select a Chaku-uta FullÂŽ music file or WMA file.
Only the selected music file is played back as a demo.
When you close the FOMA terminal during playback, the playback stops.
Press and hold p for at least one second or press h during playback or pause
to end playback.
You might be able to play back a Chaku-uta FullÂŽ music file by pressing
l(
) or selecting “Play” from the Function menu while selecting it on
another function.
Chaku-uta Full® music files are shown by titles for control (“Music title - Artist
name” in default title) when you display them from the “i-mode” folder. When you
operate them from “MUSIC Player”, they are shown by titles.
■About playback display during using MUSIC Player
…The jacket image which is stored in the music file
(When no images are stored, an animation
appears.)
…Track number/Number of total music files
…Title
…Playback state
…Playback time/Total playback time
…Play mode (No indication for “Normal”)
: Play only one
: Repeat one
: Repeat all
: Random
: Random play & repeat
: Demo (Displayed only in demo playbacks.)
…Equalizer
: Normal
: Train
…Stereo/Monaural
: Stereo
WMA list
…Artist name
…Listening (No indication for “OFF”)
: Surround
: H.BASS1
: Natur1
…Icon of Bluetooth connection (No indication for not connected)
: Being connected
280
 
 
: H.BASS2
: Monaural
…Remaster (No indication for “OFF”)
: ON
…Sound volume
: Natur2
■Operations of MUSIC Player in use
Operation
Halt
Key operation
l(
Oo(
Pause
Oo(
) or p to play back
) or p
Oo(
) or p to play back
Sound volume
adjustment
Bo or 
Replay next file
Vo or > (for at least one second)
Replay previous file
Co or < (for at least one second)
When playback time is over three seconds, no previous
music file is found, and “Random” or “Random play&repeat”
is set, you go back to the beginning of the file.
Search (fast forward)※ Press and hold Vo.
From the playback display during use of MUSIC Player, you can do the
following operations by using the switch of an earphone/microphone
(option):
Operation
Switch operation
Pause
Press once.
To play back, press again.
Replay next file
Press twice in succession.
Replay previous file
Press three times in succession.
When playback time is over three seconds, no previous
music file is found, and “Random” or “Random play&repeat”
is set, you go back to the beginning of the file.
■Playback specifications of Chaku-uta Full® music files
File format
MP4
Codec
MPEG-4 AAC
MPEG-4 AAC+ (HE-AAC)
Search (fast rewind)※ Press and hold Co.
Enhanced aacPlus
m(
Bit rate
8 to 128 kbps
Play background
c(
Extension
3gp
Display image/
Display lyric/Player
Each time of pressing switches displays in order of “Playback
display (Jacket image)” → “Full display lyric image” → “Full
display jacket image”.
■Playback specifications of SD-Audio files and number of storable files
Display next image
Display previous image 1
Music
Display list
File format
MPEG-2 AAC, MPEG-2 AAC+SBR
Bit rate
32 to 256 kbps
Maximum number of
storable files
999 files
Maximum number of
playlist
99 files (Up to 99 files can be stored in a single playlist.)※
Remaster
Each time of pressing switches between “ON” and “OFF”.
Listening
Each time of pressing switches in order of “OFF” →
“Surround” → “Natur1” → “Natur2”.
※Except “All tracks”.
File format
WMA (Windows Media Audio 9 Standard)
Equalizer
Each time of pressing switches in order of “Normal” →
“H.BASS1” → “H.BASS2” → “Train”.
Bit rate
32 to 192 kbps
Maximum number of
storable files
Maximum 1000 files
Maximum number of
playlist
100 files (Up to 250 files can be stored in a single playlist.)
※ You cannot operate during halt or pause.
You cannot use some operations during playback of a demo.
■Playback specifications of WMA files and number of storable files
281
■Icons on the Music list
When you select a music file from “MUSIC→MUSIC Player”, the following icons are
displayed:
Icon
Description
All Chaku-uta FullÂŽ music files are set with file restrictions. See page 244 for file
restrictions.
Icon
※
Stored in the FOMA terminal
Acquired source
Sites
※For the copyrighted file movable to the microSD card, “
” is displayed.
Stored on the microSD card
Information
SD-Audio file format
Chaku-uta
FullÂŽ
file format
WMA file format
UIM security function
Chaku-uta FullÂŽ music file with playback restrictions
Chaku-uta FullÂŽ music file with expired playback restrictions
Playable Uta-hodai music file
Uta-hodai music file which needs to be updated because the
playable deadline has expired
Music
Unplayable Uta-hodai music file
File with file restrictions
■Icons on the Chaku-uta Full® Music list
When you select a Chaku-uta Full® music file from “Data box→MUSIC”,
the following icons are displayed:
Icon
Audio format
AAC, AAC+(HE-AAC),
Enhanced aacPlus
—
Type
MP4 file
Partially saved Chaku-uta FullÂŽ music files
Some Chaku-uta FullÂŽ music files and Uta-hodai music files have restrictions on the
number of playbacks, playable deadline, or playable period. The following icons are
added.
･File with playback restrictions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . “ ”
･File with playback restrictions expired . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . “ ”
･Playable Uta-hodai music file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . “
”
ｼUta-hodai music file which needs to be updated because the playable
deadline has expired. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . “
”
･Unplayable Chaku-uta Full® music file or Uta-hodai music file. . . . . . . . . . . “ ”
You can check the playback restrictions for the file by “Music info”.
282
Regardless of the number of stored music files, MUSIC Player can recognize up to
1,500 music files in the display order on the All tracks list. However, the number of
recognizable music files decreases depending on the data size of music files.
Even when the file format is supported, you might not be able to play back some files.
The information of the previously played music file is erased if you do the following
operations:
ｼ When you remove/insert the microSD card
ｼ When you turn on/off the FOMA terminal
･ When you execute “Reset settings” or “Initialize”
ｼ When you delete the previously played music file
ｼ When you delete the previously played playlist
ｼ When you do not insert the microSD card on which the previously played music file
is stored
･ When you set “USB mode setting” to “microSD mode” or “MTP mode” and connect
to a personal computer
ｼ When you played back a music file from other than a playlist last time, and then
when you perform “Edit music info” or “Reset music info”, or you newly download,
save or delete a Chaku-uta FullÂŽ music file
ｼ When the music file previously played is an Uta-hodai music file which needs to be
updated because the playable deadline has expired
ｼ When the previously played music file is a WMA file and the WMA license becomes
invalid
Partially saved Chaku-uta FullÂŽ music files are not displayed when you operate from
MUSIC Player.
If you try to play back a music file with a low battery, the confirmation display appears
asking whether to play it back. The battery alert tone sounds regardless of the setting
of “Keypad sound”. When the battery becomes low during playback (including during
Play Background), the playback pauses, and the confirmation display appears asking
whether to end the playback.
Note that the battery is consumed sooner if you perform the fast-forward and other
similar operations frequently.
Information
In the following cases, the playback pauses and resumes after you finish each
operation:
ｼ When you make/receive a voice call, videophone call, or PushTalk call
･ When you receive a mail message or Message R/F while “Receiving display” is set
to “Alarm preferred” or the Stand-by display is shown
･ When an alarm of “Alarm”, “Schedule”, “ToDo”, “TV timer” or “Timer recording”
sounds
Depending on the event which occurred, the confirmation display might appear
asking whether to end MUSIC Player.
When a music file is switched to the previous or next one, the music file whose
playable deadline or playable period has expired, or WMA file whose WMA license
becomes invalid is skipped. When the Chaku-uta FullÂŽ music file has restrictions on
the number of playbacks, the confirmation display appears asking whether to play it
back regardless of the remaining number of playbacks. However, the music file
whose number of playbacks has finished is skipped.
When unused memory space on the microSD card becomes less than 300 Kbytes,
you can no longer play back WMA files. To play back WMA files, check the unused
memory space on the microSD card and delete unnecessary data files if unused
memory space is 300 Kbytes or less.
Function Menu of the Music Folder List/i-mode (Chaku-uta
FullÂŽ) Folder List/Player Menu Display
Select a play mode.
Normal . . . . . . . . . Plays back the music files sorted by type or
in the playlist in order as listed.
Finishes after the last music file is played
back.
Play only one . . . Plays back the selected music file once.
Repeat one . . . . . Plays back the selected music file
repeatedly.
Repeat all . . . . . . Plays back the music files sorted by type or
in the playlist in order as listed repeatedly.
Random. . . . . . . . Plays back the music files sorted by type or
in the playlist at random. Finishes after all
the music files are played back.
Random play&repeat
. . . . . . . . . . . . . . . Plays back the music files sorted by type or
in the playlist at random repeatedly.
Add folder
Enter a folder name.
You can enter up to 10 full-pitch/20 half-pitch characters.
You can create a total of 25 folders at each level up to the
second-tier level in the FOMA terminal. You can create
folders at each level up to the seventh-tier level on the
microSD card.
Edit folder name
Enter a folder name.
You can enter up to 10 full-pitch/20 half-pitch characters.
Delete folder
Delete this
You can delete a highlighted user folder.
Enter your Terminal Security CodeYES
Delete selected
Put a check mark for user folders to be deleted
l(
)Enter your Terminal Security Code
YES
Delete all
You can delete all user folders at the same level.
Enter your Terminal Security CodeYES
283
Music
Play mode setting
Select storage
You can set the destination folder for when you move the
Chaku-uta FullÂŽ music file to the microSD card. You can set it
for up to seventh-tier-level folders.
YES
Memory info
You can display the used memory space (estimate)/number of
stored items.
You can display them also by pressing c(
).
Point ring tone
Music info
You can display the title, artist name, playback time, etc.
Press i(
) with the music information of Chaku-uta
Full® music file displayed and select “Edit music info”; then
you can edit the information contents. Select a desired item
and then edit it. To return the edited information to the
unedited one, select “Reset music info”. Select a desired
item and select “YES”.
Add to playlist
Select a storing method.
Add one . . . . You can store the music file.
Add some . . . Select the music files to be stored, and press
l(
).
The music files are stored in the displayed order.
Music
Information

You cannot create a user folder in the WMA folder.

All the data files in the folder are deleted.
This function works as “Delete this” on the microSD card.
If you delete the Chaku-uta FullÂŽ music file set for another function, the setting returns
to the default.

“
” is displayed for the folder set as a destination.
When you execute Check microSD, or create or edit a folder by using a personal
computer, the destination folder on the microSD card might be changed. When the
setting is changed, set the destination folder again.
Select a playlist you store music files to.
When you create a new playlist to store music files to, select
“New playlist” and enter a playlist name. When 30 playlists
are already stored, the confirmation display appears asking
whether to delete them to save a new one.
Function Menu of the Chaku-uta FullÂŽ Music List/Type List/
Music List/WMA List
Player menu
You can show the Player Menu display from the Type list or
Music list.
Play mode setting
See page 283.
Move
You can move the Chaku-uta FullÂŽ music file in the FOMA
terminal to another folder inside it, or can move the Chaku-uta
FullÂŽ music file on the microSD card to another folder inside it.
Select a destination folder.
Press l(
) to display folders at the second-tier level
or lower, if they exist. Press r to return to the upper level.
Move to microSD
You can move the Chaku-uta FullÂŽ music file to the microSD
card. (See page 372)
Set as ring tone
Fullsong ring tone
284
You can set a full piece of Chaku-uta FullÂŽ music file as a ring
tone.
Select an item.
For a Chaku-uta FullÂŽ music file on the microSD card, the
confirmation display appears asking whether to move it to
the FOMA terminal. (See page 372)
You can set a part of Chaku-uta FullÂŽ music file as a ring tone.
Select a range to be setSelect an item.
You can check the range to be set by pressing
l(
).
For a Chaku-uta FullÂŽ music file on the microSD card, the
confirmation display appears asking whether to move it to
the FOMA terminal. (See page 372)
Move to phone
You can move the Chaku-uta FullÂŽ music file on the microSD
card to the FOMA terminal. (See page 372)
Edit title
You can edit the title of Chaku-uta FullÂŽ music file.
Enter a title.
For a Chaku-uta FullÂŽ music file in the FOMA terminal, you
can enter up to 9 full-pitch/18 half-pitch characters.
For a Chaku-uta FullÂŽ music file on the microSD card, you
can enter up to 18 full-pitch/36 half-pitch characters.
Reset title
You can reset the title of a Chaku-uta Full® music file to “Music
title - Artist name”.
YES
Add folder
See page 283.
Edit folder name
See page 283.
Display lyric
You can display lyric images stored in the Chaku-uta FullÂŽ
music file.
When multiple lyric images are stored, press No to display
a previous or next lyric image. You can display up to seven
lyric images.
When the image is storable, press Oo(
) and select
“YES”, then select any destination folder to save it.
Select storage
See page 284.
Memory info
You can display the used memory space (estimate)/number of
stored items.
Delete this
YES
Delete all
You can delete all Chaku-uta FullÂŽ music files or WMA files in
the folder.
Enter your Terminal Security CodeYES
If there is a user folder in a folder, you cannot delete the user
folder or Chaku-uta FullÂŽ music files in the user folder.
Delete folder
Delete this
See page 283.
Delete selected
See page 283.
Delete all
See page 283.
Information
FullÂŽ
You can select multiple Chaku-uta
music files and
operate them.
Put a check mark for Chaku-uta FullÂŽ music files to be
operatedi(
)Select an item.
Delete. . . .See “Delete this” on page 285.
Move . . . .See page 284.
Connect to URL
You can access the URL when the Chaku-uta FullÂŽ music file
has the URL information.
YES
Display image
You can display jacket images stored in the music file.
When multiple jacket images are stored, press No to
display a previous or next jacket image.
When the image is storable, press Oo(
) and select
“YES”, then select any destination folder to save it.
285
Music
Multiple-choice

When an Uta-hodai music file set for a ring tone cannot be played back or needs to be
updated because playable deadline is expired or the UIM security function is set, the
default ring tone returns.
See “Music info” for checking whether to be set as ring tone.

You cannot add music files to the playlist created using a personal computer.

If there is no music title or artist name, it is displayed as “Unknown” for each.

Some images may not be displayed correctly.
 
If you delete the Chaku-uta FullÂŽ music file set for another function, the setting returns
to the default.
If you delete the WMA file stored in the WMA playlist, it is released from WMA playlist.
When the last WMA file is deleted or all the WMA files are deleted, the licensed file is
deleted at the same time.
Function Menu during Playback/Pause/Halt
Player menu
Play mode setting
You can show the Player Menu display from the playback
display during using MUSIC Player.
Playback state continues even when you show the Player
Menu display.
See page 283.
Music
Sound effect
Remaster
You can bring the sound from an earphone or Bluetooth
device to the original sound by complementing high-pitch
range lost at data compression.
ON or OFF
Listening
You can set the effect of the sound from an earphone or
Bluetooth device.
Select an item.
Surround . . . .Makes the sound natural and stereophonic.
Natur 1/2 . . . . .Complements the cooped-up feeling specific
to earphones and plays back natural sound.
Select 1 or 2 according to your taste.
OFF . . . . . . . . .Sets Listening to “OFF”.
Equalizer
You can change the quality of the sound from an earphone or
Bluetooth device.
Select an item.
Normal . . . . .Reproduces normal sound quality.
H.BASS1. . . .Enhances bass sound.
H.BASS2. . . .Enhances bass sound more deeply than
H.BASS1.
Train . . . . . . .Minimizes abnormal sound that causes sound
leakage.
Music info
See page 284.
Connect to URL
See page 285.
Display image/
Display lyric/Player
You can change the playback display.
Display image . . . Shows the jacket image on the full display.
Display lyric . . . . . Shows the lyric image on the full display.
Player . . . . . . . . . . Shows the playback display.
286
Previous image/
Previous lyric
You can display a previous jacket image or lyric image.
Next image/Next lyric
You can display a next jacket image or lyric image.
Information

Even if an earphone or Bluetooth device is not connected, the respective setting
contents are displayed on the display.
 

For Chaku-uta FullÂŽ music files, you can display up to 3 jacket images and up to 7
lyric images.
For SD-Audio files saved by SD-Jukebox, you can display up to 20 jacket images, and
for WMA file, you can display up to 2 image buried in a file. When you use the
NapsterÂŽ application program, you can display 1 image stored as a jacket image.
There are no lyric images for them.
Using Playlist
You can create the list of music files you want to listen to, and play them
back in the order you like.
You can play back using the playlists created by the FOMA terminal or
Windows Media Player, or the SD-Audio playlists created by SD-Jukebox.
Create Playlist
Player Menu displayPlaylist
The maximum number of playlists that can be created and the number of music files
that can be stored per playlist are as follows:
Creating source
Number of playlist
Number of music files that
can be stored per playlist
Playlists created by FOMA
terminal
Maximum 30
(Except “All tracks”)
100
Maximum 100
250
Maximum 99
(Except “All tracks”)
99
Playlists created by
Windows Media Player
SD-Audio playlists created
by SD-Jukebox
■Icons on the Playlist list
Icon
Type
All tracks
All tracks for SD-Audio
FOMA playlist
SD-Audio playlist
i(
)Create playlist
Select a type and display the Music list
Put a check mark for music files to be stored
l(
The music files are stored in the displayed order.
Enter a playlist name.
You can enter up to 18 full-pitch/36 half-pitch characters.
Information
In a playlist, you cannot store partially saved Chaku-uta FullÂŽ music files or files with
playback restrictions expired.
Play Back Playlist
Playlist listSelect a playlist
Select a music file.
Press l(
) from the Playlist list to play back the
music files from the top one in the selected playlist.
You cannot play back a playlist from “MUSIC” of Data
Box.
WMA playlist
Music list of a Playlist
287
Music
When you create a playlist on the FOMA terminal, you can store the Chaku-uta FullÂŽ
music files saved on the FOMA terminal or microSD card, the WMA files saved by
Windows Media Player, and the SD-Audio files saved by SD-Jukebox into the same
playlist.
Playlist list
Music
Function Menu of the Playlist List
Player menu
You can show the Player Menu display.
Play mode setting
See page 283.
Create playlist
See page 287.
Copy playlist
Enter a playlist name.
You can enter up to 18 full-pitch/36 half-pitch characters.
When you copy the SD-Audio playlist or WMA playlist, it is
copied to the FOMA terminal as the FOMA playlist.
Edit playlist name
You can edit the name of the FOMA playlist.
Edit the playlist name.
You can enter up to 18 full-pitch/36 half-pitch characters.
Add
You can add the music files to the FOMA playlist.
Select a type and display the Music list
Put a check mark for the music files to be added
l(
The music files are stored at the end of the list in the displayed
order.
Delete playlist
You can delete the FOMA playlist.
Select a deleting method.
Delete this . . . . . . . You can delete the playlist.
Delete selected . . . Select the playlists to be deleted, and press
l(
).
Delete all . . . . . . . . Enter your Terminal Security Code.
YES
Information

You cannot copy the WMA playlist with no music file stored in.
288
Function Menu of the Music List of a Playlist
Player menu
You can display the Player Menu display.
Playback state continues even when you show the Player Menu
display.
Play mode setting
See page 283.
Music info
See page 284.
Add
See page 288.
DEL from playlist
You can release the music files from the FOMA playlist.
Select a deleting method.
DEL one from list . . . . . . You can release the music file.
DEL some from list. . . . . Select the music files to be released,
and press l(
).
DEL all from list. . . . . . . . You can delete the whole playlist.
YES
Order to play
You can change the order of playlist created on the FOMA
terminal.
Select a music fileUse Bo to change the order to play
Oo(
To change the order in succession, repeat the above steps.
Add to playlist
See page 284.
Display image
See page 285.
Display lyric
See page 285.
l(
Information

You cannot release music files from the playlists created on a personal computer.
i-Îąppli/i-Widget
i-Îąppli . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Downloading i-Îąppli from Sites . . . . . . . . .
Starting i-Îąppli . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting i-Îąppli . . . . . . . . . . . . . . . . . . . . . . . . 
Starting i-Îąppli Automatically . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using i-Îąppli Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting i-Îąppli Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operating i-Îąppli Stand-by Display
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Displaying i-Îąppli Data Files on the microSD Card
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 
i-Widget. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using i-Widget . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting i-Widget . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Starting Widget Îąppli . . . . . . . . . . . . . . . . .
290
290
291
306
307
307
308
309
310
311
311
312
313
289
i-Îąppli
“i-αppli” is a software program for i-mode mobile phones. You can use
your FOMA terminal more conveniently by downloading※ various
software programs from the i-mode site. For example, you can
automatically update the stock price information or weather information,
and enjoy games without accessing network.
It also supports i-Îąppli online which enables the online communication
among multiple parties using real time communication and i-Îąppli call
(see page 307), so you can enjoy versus games and chat applications.
Also, some i-Îąppli programs are compatible with i-Widget (see page 311).
※You are separately charged a packet communication fee.
The packet communication fee for the overseas use differs from the one for the
domestic use. For details, refer to “Mobile Phone User’s Guide [International Services]”
or the DOCOMO Global Service website.
For details on i-αppli, refer to “Mobile Phone User’s Guide [i-mode] FOMA version”.

i-Îąppli/i-Widget
Downloading i-Îąppli from Sites
You can download software programs from sites to the FOMA terminal.
You can save up to 100 files (up to about 2 Mbytes per file), however, the
number of files you can save decreases depending on the data volume
because the memory space is shared with other data files. (See page 534)
Call up an i-Îąppli downloadable site
Select a software program.
Select “OK” when downloading ends.
See page 210 when i-Îąppli programs are stored to the maximum.
When downloading ends, the display for Software Setting (Network Set, Stand-by
Set, Location Usage, Program Guide Key, or iÎąppli call) might appear. These
settings can be done also from the Software list.
YES or NO
YES . . . . Starts i-Îąppli.
NO . . . . . Returns to the site display.
290
When downloading is suspended
When you press r or h to suspend downloading an i-Îąppli program of 100 Kbytes
or more, or when downloading is suspended by the radio wave conditions, the
confirmation display appears asking whether to resume downloading. Select “YES” to
resume downloading the remaining part. Select “NO” to show the confirmation display
asking whether to save the file downloaded halfway. Select “YES” to partially save the
file.
You can re-download the rest of the partially saved i-Îąppli program from the Software list.
When you downloaded mail-linked i-Îąppli
An i-Îąppli mail folder is created automatically each in the Inbox/Outbox Folder list, and
the title of the downloaded mail-linked i-Îąppli becomes the name of the folder.
You can save up to five mail-linked i-Îąppli programs.
You cannot download the software program if the mail-linked i-Îąppli using the same
folder is already in the Software list.
You cannot download mail-linked i-Îąppli while Mail Security is set.
You cannot download mail-linked i-Îąppli if the Inbox/Outbox Folder list contains five
i-Îąppli mail folders.
When re-downloading mail-linked i-Îąppli whose folder only remains, the confirmation
display appears asking whether to use the existing i-Îąppli mail folder. If you select
“YES”, the existing folder is used. If you select “NO” because you do not use it, the
confirmation display appears asking whether to delete an existing folder and create a
new one. You cannot download mail-linked i-Îąppli without creating a new folder.
Information
You can download pre-installed i-Îąppli programs from the
“P-SQUARE” site (in Japanese only).
iMenu→メニューリスト (Menu List)
→ケータイ電話メーカー (Mobile Phone Maker)→P-SQUARE
QR code for
accessing the site
Downloading is not available from some accessed sites.
Some i-Îąppli programs can automatically connect to the i-mode Center after they are
downloaded. However, to use this service, you need to set it in advance in “Network
set” of “Software setting”.
Information
Display Software Info
You can display software information when downloading i-Îąppli.
mi-ÎąppliiÎąppli settingsDisp. software info
Display or Not display

Starting i-Îąppli
i(for at least one second)
Select a software program to be started.
On the Software list, the icons show the types of i-Îąppli
programs and supported functions.
: GPS compatible i-Îąppli
: Osaifu-Keitai compatible i-Îąppli
: Management information i-Îąppli
: microSD card compatible i-Îąppli
: Vertical full display compatible i-Îąppli
: Horizontal display compatible i-Îąppli (incompatible
with full display)
: Horizontal full display compatible i-Îąppli
: i-Îąppli DX
: Mail-linked i-Îąppli
Software list
: Partially saved i-Îąppli
: Set for Auto Start
: Set for the i-Îąppli Stand-by display
: Set for both Auto Start and the i-Îąppli Stand-by display
: Can set for the i-Îąppli Stand-by display
: Downloaded from an SSL/TLS page
: Not set for IC application
: Downloaded or upgraded by using a different UIM
You can display the Software list on the microSD card by
mi-ÎąppliiÎąppli(microSD)Software list.
Each time you press c(
) from the Software list in the FOMA terminal,
the display format changes.
When you start an i-Îąppli DX program or while it is running, the confirmation
display might appear asking whether to permit the i-Îąppli DX program to use the
FOMA terminal’s information and functions.
When you start the Osaifu-Keitai compatible i-Îąppli program for the first time, the
confirmation display appears asking whether to make the UIM and IC card
compatible. The UIM information that has been made compatible is saved on the
IC card as IC owner information.
291
i-Îąppli/i-Widget
“ ” appears at the top of the display while software information or a software program
is being downloaded from SSL/TLS pages.
At downloading, the confirmation display might appear asking whether to send the
“Phone/Terminal and UIM ID”. Select “YES” to start downloading. In this case, the
“Phone/Terminal and UIM ID” is sent to the IP (Information Provider) over the Internet,
so could be deciphered by third parties. However, your phone number, address, age,
and gender are not notified to the IP (Information Provider) or others by this operation.
If you attempt to re-download the software program that was downloaded using a
different UIM, the confirmation display appears asking whether to overwrite the
software program. With the Osaifu-Keitai compatible i-Îąppli, the confirmation display
appears telling that the data on the IC card is to be deleted. Select “YES” to start
downloading. When downloading ends, the software program that was downloaded
using a different UIM and the data on the IC card are deleted.
You cannot download some software programs while the IC card function is working
or IC Card Lock is activated.
Some software programs that start immediately after downloading cannot be saved.
Depending on the data volume on the IC card, you might not be able to download
Osaifu-Keitai compatible i-Îąppli even if there is still available space for software
storage. Delete the displayed software programs following the confirmation display,
and then download it again. (Some software programs might not be targeted for
deletion, depending on the software type to be downloaded.)
Depending on the software program, you need to start it and delete the files on the IC
card before deleting the software program itself.
“i-αppli mail” is the mail sent and saved by mail-linked i-αppli and mail received as
mail-linked i-Îąppli. i-Îąppli mail is automatically saved to the i-Îąppli mail folder.
When you select a partially saved i-Îąppli program, you can download the
remaining part of it.
“
” or “
” is displayed while an i-αppli program is running.
To end i-Îąppli, press and hold r for at least one second or press h; then
select “YES”.
The software program you started last time comes at the top of the list. You
cannot manually change the order of software programs.
See page 209 when you select “Search by i-mode”.
i-Îąppli/i-Widget
Information
When a software program can be started from another program, the confirmation
display appears. When a software program to be started is not specified, select a
software program.
To start up i-αppli DX, set the data and time by “Set time” beforehand.
When a software program is running, melodies are played back at the volume set for
“Phone” of “Ring volume”. However, melodies are not played back during a call.
You may need to set the communication setting while a software program is running.
When communicating frequency is extremely high in a certain period of time while an
i-Îąppli program is running, the confirmation display appears asking whether to
continue communicating.
With some software programs, you can use the Web To function and the Phone To/
AV Phone To function from i-Îąppli. However, you cannot use them while the software
program is running as the i-Îąppli Stand-by display.
If you start the camera from i-Îąppli, the shot images are not saved with ordinary
images, but are saved as part of i-Îąppli for its usage.
If you start the camera from i-Îąppli, you can specify the image size or image quality for
some i-Îąppli programs.
Images※ that are used by i-αppli and data you have entered might be sent over the
Internet to the server automatically.
※i-αppli uses the following types of images:
ポImages shot by the camera after it is started from a camera-linked application
program
ポImages obtained by the infrared communication function of i-ιppli
ポImages downloaded from sites or Internet websites
ポImages obtained from Data Box by i-ιppli
i-Îąppli mail running under mail-linked i-Îąppli might not be displayed correctly.
292
Information
Some i-Îąppli programs save the various information used on the i-Îąppli programs
when you end them. However, the information might not be saved if the low battery
alarm sounds or the battery pack is removed while the i-Îąppli program is running. If
the battery level indicates “ ”, either press -h or end the i-αppli program in
accordance with the operation of each software program.
You can save the data files of some software programs to the microSD card, but you
might not be able to use them for another model. You can check “iαppli data” for the
software programs that use the microSD card.
Some IPs (Information Providers) may access the software program stored in your
mobile phone and have it directly halted, depending on the software program. In that
case, you will not be able to start or upgrade the software program, or use it for the
Stand-by display. You can delete it or display the software information. To resume
running the software program, you need to receive the communication to cancel the
software halting state. Contact the IP (Information Provider) to inquire about that.
Some IPs (Information Providers) might send data to the software program stored in
your mobile phone depending on the software program.
When the IP (Information Provider) requests to halt or re-open the software program
or sends data to it, the mobile phone communicates and “ ” is displayed. In this
case, you are not charged a communication fee.
With some software programs, you can perform registering or deleting My Menu on
the i-Îąppli program.
With some software programs, you can download Chaku-uta FullÂŽ music files via
i-Îąppli program. You can save the obtained Chaku-uta FullÂŽ music files to the same
storage location as the ordinary Chaku-uta FullÂŽ music files.
To creators of i-Îąppli
If you encounter an error while creating a software program, the Trace Information
display might help identify the problem.
For how to check the trace information, see “Trace Information” on page 293.
You can show the information of i-Îąppli by -mi-ÎąppliAbout iÎąppli.
Use Bar Code Reader
You can use the camera to scan JAN codes, QR codes, and CODE 128 depending on
the software program.
When you start Bar Code Reader while an i-Îąppli program is running, the camera (Bar
Code Reader) starts up. Put the code to be scanned within the guide frame and shoot.
You need to download CODE 128 compatible i-Îąppli program to scan CODE 128.
The scanned data file is used/saved by the i-Îąppli program.
Trace Information
You can check the details when a software program malfunctions.
Motion tracking
The FOMA terminal supports “Motion Tracking” which enables you to operate i-αppli
programs (by inclining or swinging the FOMA terminal) through the recognition
technology of the inside camera.
Motion Tracking might not work in the following cases:
ポWhen the lens of the inside camera is dirty
ポWhen the clothes you wear are similar to the background
ポWhen the background is not stable such as when you are moving
ポWhen you are in a dark or too bright place
Use i-Îąppli Touch
When the memory space for Trace Info becomes full, the information is
overwritten from the oldest one.
When “
” is displayed on the Trace information display, press
i(
), and select “Copy info” to copy the information. Select “Delete info”,
and select “YES” to delete the information.
Select “Store in microSD”, and select “YES” to store in the microSD card.
Security Error History
You can check the details when an i-Îąppli program ends because of a
security error.
mi-ÎąppliiÎąppli infoSecurity error history
When “
” is displayed on the Security error history display, press
i(
), and select “Copy info” to copy the information. Select “Delete info”,
and select “YES” to delete the information.
You can display the security error history also by selecting “
” from the
desktop.
Function Menu of the Software List
Set iÎąppli To
You can set whether to permit the i-Îąppli program to start from
a link on site or mail message. You can set also for when you
place the FOMA terminal over an IC card compatible scanning
device. You can set this for each software program.
Put a check mark for items to be setl(
Some items might not be set depending on the software
program.
Auto start time
See page 307.
With software programs that enable you to play a match via Bluetooth communications,
you can easily connect via Bluetooth by placing the f mark over that of another FOMA
terminal equipped with i-Îąppli Touch.
When you start the program from the i-Îąppli Stand-by display or you are using the IC
card, you cannot use the program.
Software setting
293
i-Îąppli/i-Widget
■Warning
The motion tracking compatible application program is the game to play by inclining or
swinging the FOMA terminal. If you excessively swing your FOMA terminal, it might
happen that it hits against persons or objects, resulting in accidents or damage. When
playing the game, securely take hold of your FOMA terminal, do not swing to an extent
more than necessitated, and check around you for safety.
mi-ÎąppliiÎąppli infoTrace info
Stand-by set
See page 309.
Upgrade
Network set
You can set whether to communicate while an i-Îąppli program
is running.
ON or OFFl(
Set desktop/
Stand-by net
See page 310.
Icon info
You can set whether to permit the i-Îąppli program to use
information of icons indicating i-mode mail, SMS messages,
Messages R/F, battery level, Manner Mode, and within/out-of
service area.
ON or OFFl(
Change mld./img.
i-Îąppli/i-Widget
View P. book/hist.
You can set whether to permit the i-Îąppli program to change
the setting for the ring tones, Stand-by display, etc. This
function is available only for i-Îąppli DX programs.
ON, OFF or Check every changel(
If you select “Check every change”, the confirmation display
appears each time the i-Îąppli program tries to change the
setting for the ring tones, Stand-by display, etc.
You can set whether to permit the i-Îąppli program to refer to
the Phonebook, Redial, and Received Calls. This function is
available only for i-Îąppli DX programs.
ON or OFFl(
View ToruCa
You can set whether to permit the i-Îąppli program to refer to
ToruCa files. This function is available only for i-Îąppli DX
programs.
ON or OFFl(
Location usage
You can set whether to permit the i-Îąppli program to use
location information. This function is available only for i-Îąppli
DX programs.
ON or OFFl(
Program guide key You can set the software program for the i-Îąppli Program
Guide that starts up from 1Seg. You can set this only for the
i-Îąppli DX program that links to 1Seg.
ON or OFFl(
Map setting
iÎąppli call
Software info
294
You can set the software program used on the GPS function.
ON or OFFl(
See page 308.
You can display the software name, version, and others of the
i-Îąppli program.
YES
key
Add desktop icon
See page 32.
long press set. See page 410.
Delete
Delete this
YES
Delete selected
Put a check mark for software programs to be deleted
l(
)YES
Delete all
Enter your Terminal Security CodeYES
Move to microSD
See page 373.
Move to phone
See page 373.
Power saver
You can set whether to validate Power Saver Mode for each
i-αppli program for when “αPower saver” is set to “ON”.
ON or OFF
Information

When you set “Icon info” to “ON” for the i-αppli Stand-by display, the icon information
for unread mail/message, battery level, Manner Mode, radio wave strength and
out-of-service area can be sent to the IP (Information Provider) over the Internet in the
same way as the Phone/Terminal and UIM ID, and can be deciphered by third parties.
When the software program needs “Icon info”, the software program might not run if
“OFF” is selected.
Information

Depending on the software program, you can upgrade it at start.
At upgrading, the confirmation display might appear asking whether to send the
“Phone/Terminal and UIM ID”. Select “YES” to start upgrading. In this case, the
“Phone/Terminal and UIM ID” is sent to the IP (Information Provider) over the Internet,
so could be deciphered by third parties. However, your phone number, address, age,
and gender are not notified to the IP (Information Provider) or others by this operation.
You cannot upgrade the mail-linked i-Îąppli in the following cases:
ポWhile details of the corresponding i-ιppli mail folder are displayed
ポWhile Mail Security is set
ポWhen Mail Security is set for the corresponding i-ιppli mail folder
When you delete mail-linked i-Îąppli
When you delete an i-Îąppli program whose files are on the
microSD card
The confirmation display appears asking whether to delete files on the microSD card as
well.
YES . . . . . . Deletes both the software program and files on the microSD card. Press
“YES” again on the confirmation display. You need to enter your Terminal
Security Code to execute “Delete” or “Delete selected”.
NO. . . . . . . Deletes the software program only and the files on the microSD card are left.
Cancel . . . . Does not delete both the software program and files on the microSD card,
and the former display returns.
Pre-installed i-Îąppli Programs
The following i-Îąppli programs are pre-installed:
You can delete the pre-installed i-Îąppli programs. You can re-download them from the
“P-SQUARE” site (see page 209). When you use a UIM other than the one used for
downloading, the UIM security function (see page 39) is set for them.
Deadlines for re-download services
・“機動戦士ガンダムオンライン (MOBILE SUIT GUNDAM ONLINE)”:
the end of April, 2013
・“レイトン教授と悪魔の箱 (Professor Layton and Pandora’s Box)”:
the end of April, 2013
・“ケータイTOOL＜辞書＞ (KEITAI TOOL )”: the end of March, 2013
・“日英版／日中版 しゃべって翻訳 for P (J-E/J-C Speech Translation for P)”:
the end of March, 2013
・“ファミリー伝言板 (Family Message Board)”: the end of April, 2010
・“時刻表ウィジェット (Timetable Widget)”: the end of May, 2012
・“P-SQUARE INFO”: the end of April, 2013
・“付箋 (Sticky)”: the end of April, 2013
The re-download service might be halted or closed without notice even in the service
period.
Deadlines for downloading i-Îąppli additional data
・“機動戦士ガンダムオンライン (MOBILE SUIT GUNDAM ONLINE)”:
the end of April, 2013
(The online match is the service of up to the end of April, 2010.)
・“レイトン教授と悪魔の箱 (Professor Layton and Pandora’s Box)”:
the end of April, 2013
・“ケータイTOOL＜辞書＞ (KEITAI TOOL )”: the end of April, 2013
・“日英版／日中版 しゃべって翻訳 for P (J-E/J-C Speech Translation for P)”:
the end of April, 2013
・“ファミリー伝言板 (Family Message Board)”: the end of April, 2010
・“時刻表ウィジェット (Timetable Widget)”: the end of June, 2012
・“P-SQUARE INFO”: the end of April, 2013
295
i-Îąppli/i-Widget
The confirmation display appears asking whether to delete the i-Îąppli mail folder as well.
If you do not delete it, you can check the text of mail from the Outbox/Inbox list.
YES . . . . . . Deletes both the software program and the i-Îąppli mail folder.
NO. . . . . . . Deletes the software program only and the i-Îąppli mail folder is left.
Cancel . . . . Does not delete both the software program and i-Îąppli mail folder; the former
display returns.
You can delete neither the i-Îąppli program nor the i-Îąppli mail folder even if you select
“YES”, in the following cases:
ポWhile Mail Security is set
ポWhile the folder is set with security
ポWhile displaying details of the folder
ポWhen the folder contains protected mail
When you delete Osaifu-Keitai compatible i-Îąppli
The confirmation display appears telling that the files on the IC card will be deleted.
You cannot delete the “iD 設定アプリ (iD appli)”.
You might not be able to delete the Osaifu-Keitai compatible i-Îąppli while the IC card
function is working or IC Card Lock is set.
機動戦士ガンダムオンライン プロローグ版
(MOBILE SUIT GUNDAM ONLINE PROLOGUE)
You can play a match online with the other
party in the world of MOBILE SUIT GUNDAM.
By making full use of the i-Îąppli online
function, you can play the match online
between the E. F. S. F. and Zeon. The
number of available mobile suits is going to
increase depending on the playing results or
by time release.
This is a fantasy adventure game. You
challenge various puzzles to solve a mystery
of “Pandora’s Box” that those who open the lid
shall die without fail.
With the complete version, you can enjoy
whole story and mini games with animation
and voice of characters.
Š SOTSUポSUNRISE
Š NBGI
レイトン教授と悪魔の箱
(Professor Layton and Pandora’s Box)
Software listガンダムオンライン (GUNDAM ONLINE)
Oo
Š 2007-2009 LEVEL-5 Inc.
When you start this program in Normal Style, the display appears advising you to
play the game in Horizontal Open Style.
With this game, you can select items and proceed operations also by pressing
0 instead of Oo.
When you activate this i-Îąppli program in Normal Style, the display appears
advising you to play the game in Horizontal Open Style.
i-Îąppli/i-Widget
Select a menu.
TIME ATTACK . . . . . . . . . You can play in time attack mode offline.
SURVIVAL . . . . . . . . . . . . You can play in survival mode offline.
RECORD . . . . . . . . . . . . . Displays the game record.
HELP. . . . . . . . . . . . . . . . . Displays how to operate the game.
UPGRADE . . . . . . . . . . . . Accesses the site and upgrades the program to the
network battle version.
OPTION . . . . . . . . . . . . . . Sets a key operation type, volume level, and vibration.
QUIT . . . . . . . . . . . . . . . . . Ends the application program.
When you upgrade to the network battle version, the items of “NETWORK
BATTLE” are added.
You are charged a packet communication fee for when you access the site.
The network battle version data is saved to the microSD card.
As upgrading the program requires the download of bulky data, you need to
subscribe to Pake-hodai, Pake-hodai full, or Pake hodai double.
296
Software listレイトン教授と悪魔の箱 (Professor
Layton and Pandora’s Box)OoOo
Select a menu.
はじめから (From the beginning) . . . Starts the game from the beginning.
オプション (Option) . . . . . . . . . . . . . . Sets the volume level and vibration.
アップグレード (Upgrade) . . . . . . . . . Upgrades the program to the complete
version.
You are charged a packet communication fee for accessing the site.
The complete version data is saved to the microSD card.
As upgrading the program requires the download of bulky data, you need to
subscribe to Pake-hodai, Pake-hodai full, or Pake-hodai double.
ケータイTOOL＜辞書＞ (KEITAI TOOL )
With the Spur-of-the-moment English conversation dictionary,
you can check the English expressions used in your daily life or
for overseas travel. Further, this is a comprehensive dictionary
that comes with “English-Japanese/Japanese-English
dictionary of Gakken JISUPA” and “Japanese dictionary of
Gakken” that enables you to check Japanese/English words
and phrases.
You can also perform cross-reference between dictionaries.
As the size of audio data of “Spur-of-the-moment English
conversation dictionary” and dictionary data of
“English-Japanese/Japanese-English dictionary of Gakken
JISUPA” and “Japanese dictionary of Gakken” are bulky, you need to subscribe to
Pake-hodai, Pake-hodai full, or Pake-hodai double for downloading.
The voice data of the “Spur-of-the-moment English conversation dictionary” and
dictionary data of “English-Japanese/Japanese-English dictionary of Gakken JISUPA”
and “Japanese dictionary of Gakken” are saved to the microSD card. While accessing
the microSD card, wait without operating the keys. According to the number of audio
data files on the microSD card, it may take long to finish accessing.
The installed e-dictionary uses “Spur-of-the-moment English conversation dictionary”
and “English-Japanese/Japanese-English/Japanese dictionaries of Gakken Co., Ltd.”.
Software list
ケータイTOOL＜辞書＞ (KEITAI TOOL )
Read “免責 (Exemption clause)” thoroughlyOK
If you remove a check mark for “アプリ起動時に常に表示する。(Always shows
this display at the start of this application program.)”, “免責 (Exemption clause)”
does not appear when you start the program next time.
Just by speaking a phrase to be translated into your FOMA
terminal, this application program translates it from Japanese
to English or Chinese and vice versa.
You can use all the functions charge free for 60 days from
when you start using this application program. Some phrases
available for translation are restricted on and after the 61st
day. To use all the services, you need to register in My Menu
(charged) from the “しゃべって翻訳 (Speech Translation)”
site by ATR-Trek Co., Ltd. (in Japanese only)
[How to access: iMenu→メニューリスト (Menu List)
→辞書／学習／便利ツール (Dictionary/Study/
Convenient Tool)→辞書／翻訳 (Dictionary/Translation)
→しゃべって翻訳 (Speech Translation)]
You are separately charged a packet communication fee.
学研 辞スパ英和／和英／国語
(English-Japanese/Japanese-English/Japanese dictionary of Gakken JISUPA)
. . . The English-Japanese/Japanese-English dictionary starts. Enter the
Japanese/English word or phrase into the input box for searching.
英会話とっさのひとことクイズ
(Spur-of-the-moment English conversation quiz)
. . . You can enjoy quizzes made from the title expressions.
Software list
日英しゃべって翻訳_P (J-E Speech Translation_P) or
日中しゃべって翻訳_P (J-C Speech Translation_P)
SKIP
Select “日英しゃべって翻訳_P (J-E Speech Translation_P)” for using J-E
version, or select “日中しゃべって翻訳_P (J-C Speech Translation_P)” for using
J-C version.
Select a dictionary to be used.
英会話とっさのひとこと辞典
(Spur-of-the-moment English conversation dictionary)
. . . The Spur-of-the-moment English conversation dictionary starts. Check the
English expressions by specifying a scene or keyword you encounter or use in
your daily life. Further, you can confirm those English expressions with voice.
The display is for
J-E version.
Š ATR-Trek
Read “しゃべって翻訳とは (What is Speech
Translation?)” and “ご利用規約 (Usage rules)”
thoroughly同意する (Agree)
You need to agree with “ご利用規約 (Usage rules)” when you use the program
for the first time.
Read “ご利用注意事項 (Cautions in use)” thoroughly
OKはい (YES)
If you select “いいえ (NO)”, “しゃべって翻訳とは (What is Speech
Translation?)”, “ご利用規約 (Usage rules)”, and “ご利用注意事項 (Cautions in
use)” do not appear when you start the program next time.
はい (YES)OK
“アプリの使い方 (How to use application)” appears at the first startup.
297
i-Îąppli/i-Widget
日英版／日中版 しゃべって翻訳 for P
(J-E/J-C Speech Translation for P)
5
Select a menu item.
日→英 翻訳 (Translate Japanese to English)
. . . Starts translation from Japanese to English.
英→日 翻訳 (Translate English to Japanese)
. . . Starts translation from English to Japanese.
日→中 翻訳 (Translate Japanese to Chinese)
. . . Starts translation from Japanese to Chinese.
中→日 翻訳 (Translate Chinese to Japanese)
. . . Starts translation from Chinese to Japanese.
シーンを変更 (Change scene)
. . . Select a scene suitable for words to be translated.
Press i to switch between Japanese and English or Chinese.
i-Îąppli/i-Widget
Gガイド番組表リモコン (G Guide Program List Remote Control)
This is a convenient i-Îąppli program that bundles the TV
program list and AV remote control function and the
monthly charge is free.
Anytime and anywhere you are, you can easily obtain the
terrestrial digital, terrestrial analog or BS digital TV
program information for the desired time zone. You can
know about titles, contents, and start/end times of TV
programs. Further, you can start a 1Seg program from the
program list and vice versa.
If there is any program you want to watch, you can set
timer recordings of the program on a DVD recorder, etc.
over the Internet. (You need to have a DVD recorder, etc.
that supports the remote timer recording function. And you
need to perform initial settings of this application
program.) Further, you can search for the program
information by keywords such as program genres or
celebrities you like, or pickup keywords on the top of the
display. You can also remote-control a TV, video recorder, ※The display is for
and DVD player. (Some models are not supported.)
reference. The actual one
You can browse and operate the program guide even on
may differ. Local programs
according to your region
the horizontal display. (Some functions are not supported
appear on your display.
on the horizontal display.)
See page 384 for details on the infrared remote control.
You need to make the initial settings and to agree with the usage rules for the first time.
You are separately charged a packet communication fee.
To use this application program overseas, set the FOMA terminal’s clock to Japan time.
For details, refer to “Mobile Phone User’s Guide [i-mode] FOMA version”.
298
About TV timer function
You can set 1Seg TV Timer for programs you want to watch by selecting from the
program list of this application program.
How to set TV Timer
1. Software listGガイド番組表リモコン (G Guide Program List Remote Control)
Highlight a program you want set TV Timer for and press i(
視聴予約 (TV Timer)予約実行 (Execute booking)
Operate following the instructions on the display.
About timer recording function
You can select a program you want to record and set a timer recording from the program
list of this application program.
How to set a timer recording
1. Software listGガイド番組表リモコン (G Guide Program List Remote Control)
Highlight a program to be set for a timer recording and press i(
♯ワンセグ録画予約 (1Seg timer recording)予約実行 (Execute booking)
Operate following the instructions on the display.
(You can set a timer recording also by highlighting a program and pressing s.)
About remote timer recording function
If you have a DVD recorder, etc. that supports the remote timer recording function, you
can set timer recordings from the program list of this application program over the
Internet even if you are away.
For remote timer recording, you need to make initial settings of this application program.
How to make initial settings
1. Set the Internet connection for the DVD recorder, etc.
(Refer to the instruction manual of the DVD recorder, etc. you use.)
2. Software listGガイド番組表リモコン (G Guide Program List Remote Control)
i(
)リモート録画予約 (Remote timer recording)
Operate following the guidance.
How to set timer recordings
After the initial settings, specify your desired program and select “リモート録画予約
(Remote timer recording)”. Then, the DVD recorder, etc. specified on this application
program is connected via the Internet, and you can set timer recordings.
You are separately charged a packet communication fee.
iD 設定アプリ (iD appli)
DCMXクレジットアプリ (DCMX credit appli)
“iD” denotes convenient electronic money that makes use of
the credit settlement system. You can easily do shopping by
placing your Osaifu-Keitai with your credit card information set
or your credit card which supports “iD” over a scanning device
at shops. You can set up to two kinds of credit card information
on Osaifu-Keitai and can use it by shops according to specific
benefit. Depending on the card publishing company, cashing is
also supported.
※The display is for reference.
For using “iD” on Osaifu-Keitai, you need to subscribe to a
The actual one may differ.
card publishing company that supports “iD” and to set with “iD
設定アプリ(iD appli)” or card application provided by the card publishing company.
Depending on the card you use, you need to set with “iD 設定アプリ (iD appli)” and
then set the card application.
The expense (annual fees, etc.) charged for the iD service differs depending on the
card publishing company.
You cannot delete “iD 設定アプリ (iD appli)”. Before you initialize iC owner, perform “iD
アプリ初期化 (Initialize iD Application)” from “設定メニュー (Setting M)” of “iD 設定ア
プリ (iD appli)”.
For the information about “iD”, refer to the i-mode site of “iD” (in
Japanese only).
i-mode site: iMenu→メニューリスト (Menu List)→「iD」
※The display is for reference.
The actual one may differ.
Subscribing for membership/Screening ※1
Setting card information
Use
Check
No troublesome deposit is required!
Just by placing the mobile phone with the
card information setting completed, at a
shop where the following iD mark is put
up, you can enjoy shopping without
signing※2.
You can check, on the application
program, the service contents of DCMX,
the balance for this month※3, and
detailed account!
Change
You can perform setting from the
application program when changing
models or updating your validity period.
※1 The online screening is conducted at your subscription for DCMX mini. For
subscribing to a service other than “DCMX mini”, you are connected to the
subscription page for i-mode.
※2 You might be required to enter your pin number under certain conditions.
※3 Available for DCMX mini only.
299
i-Îąppli/i-Widget
QR code for
accessing the site
“DCMX” is a credit service that supports “iD” and offered by
NTT DOCOMO, INC. DCMX provides DCMX mini that enables
you to use up to ÂĽ10,000 per month and respective DCMX/
DCMX GOLD services that enable you to use more amount
and save up DOCOMO points.
With “DCMX mini”, you can easily make a subscription from
this application program and immediately use Mobile Phone
Credit.
For service contents and details of subscriptions, refer to the
i-mode site of DCMX (in Japanese only).
・i-mode site: iMenu→DCMX iD
モバイルGoogleマップ (Google Map for Mobile)
QR code for
accessing the site
On the map, you can easily find out area information, shop
information, and the contents created by users. You can switch
to the aerial photo mode or view the map by Street View. You
can also check the transportation to the destination by the line
search and navigate yourself to the destination.
Information
“未設定 (Unset)” or
is displayed on the Software list until the card information
setting is completed.
To start this application program for the first time, you need to agree with “ご利用上の
注意 (Cautions in use)”.
You are charged a packet communication fee for settings and operations.
■Cautions on Osaifu-Keitai compatible i-αppli
Note that we take no responsibility for any information set on your IC card.
Š 2009 Google - Map data Š 2009 ZENRIN
■About the Map display
l: Displays the menu.
i: Searches. (Searches shops in the area, service information, and other places to
show on the map.)
Mo: Moves the cursor.
i-Îąppli/i-Widget
Oo: Context menu [現在地の住所 (Postal address of current location),
ここまでの経路 (Route up to here), ここからの経路 (Route from here),
ストリートビュー (Street view), お気に入りに保存 (Bookmark),
付近を検索 (Search the vicinity)]
1: Zoom out
2: Switches map/aerial photo.
3: Zoom in
0: Shows the current location.
a: Saves to/Displays from bookmark.
You need to agree to the usage rules when you use it for the first time.
You are separately charged a packet communication fee. You are advised to subscribe
to Pake-hodai, Pake-hodai full or Pake-hodai double for using this software program.
For details, refer to “ヘルプ (Help)” in the menu.
300
モバイルSuica登録用ｉアプリ (Mobile Suica Setup i-αppli)
ｉアバターメーカー (i-Avatar Maker)
What you can do with i-Avatar Maker
■Create avatars
You can easily create avatars by using various parts prepared
by i-Avatar Maker. You can create avatars viewing the images
shot by the camera or stored in Data Box, or can create
avatars based on the prepared samples.
■Use avatars
You can use the created avatars by converting to the materials
for Deco-mail, Deco-mail pictograms, Decome-Anime, or the
Machi-chara images which support i-concier.
By registering the created avatars on the i-avatar site, you can
change their clothes and publicize them on the competition
site.
Š 2009 Acrodea, Inc./
You are separately charged a packet communication fee for
Š eitarosoft
converting avatars to Decome-Anime templates or
※The display is for reference.
Machi-chara images.
The actual one may differ.
You are separately charged a packet communication fee for
registering avatars on the i-avatar sites.
You might need to purchase items for changing their clothes on the i-avatar site.
i-avatar is a trademark of D2 COMMUNICATIONS.
“Avatar Maker” is a trademark of ACRODEA, Inc.
i-Îąppli/i-Widget
“モバイルSuica登録用ｉアプリ (Mobile Suica Setup i-αppli)”
is the i-Îąppli program NTT DOCOMO provides for making
initial settings required before you use the Osaifu-Keitai
compatible service, “Mobile Suica”, offered by JR East. Make
the initial settings on this application program, and follow the
online instructions to download the Suica application from the
JR East site and subscribe to it.
You need to agree with “ご注意事項（必読）[Cautions (Must ※The display is for reference.
The actual one may differ.
read)]” when you use this program for the first time.
You are separately charged a packet communication fee.
You can delete this application program after completing initial settings, but the area
within the IC card you set remains occupied. To use the occupied area for other
services, you need to initialize all the data in the IC card (full format, hereafter).
You need to visit a docomo shop to perform a full format.
All the data files on the IC card are deleted by the full format.
When you use Mobile Suica Service after a full format, you need to make initial settings
again using this i-Îąppli program.
For the information about Mobile Suica, refer to the i-mode site (in Japanese only).
i-mode site: iMenu →メニューリスト (Menu List)
→ おサイフケータイ (Osaifu-Keitai)
→ 対応サービス (Compatible services) → モバイルSuica (Mobile Suica)
“Mobile Suica” is a registered trademark of East Japan Railway Company.
いっしょにデコ (Deco Together)
This is the i-Îąppli touch (see page 293) compatible application
that enables you, just by placing f mark of your FOMA
terminal over that of the other party, to decorate a still image
you and he or she shot together, by pasting stamps, drawing
lines, or writing letters on it.
You can save the decorated image to the folder in “My
picture”.
For details, refer to the “ヘルプ (Help)” on the Menu.
※The display is for reference.
The actual one may differ.
301
ファミリー伝言板 (Family Message Board)
Family Message Board is an application program that enables
you to share memos and schedule events among your family
or friends. After registering to join a group, you can share the
memos and schedule events with other members of the group.
Further, you can check the memos and schedule events by
using compatible TV.
You are separately charged a packet communication fee.
For details, press m[説明(Explanation)] from each display
to show them.
For the compatible TV sets and how to access on the TVs,
refer to the information of the Function menu.
Š Panasonic Mobile Communications Co.,Ltd.
Software listファミリー伝言板 (Family Message Board)
Read “利用規約 (Usage rules)” thoroughly
“同意のうえ利用する (Agree with Exemption Clause)”
i-Îąppli/i-Widget
If you put a check mark for “次回から表示しない (Does not show from the next
time)”, “利用規約 (Usage rules)” does not appear when you start the program
next time.
Register yourself.
You need to register yourself at the first startup. Select “ユーザーの登録 (User's
registration)” and register yourself following the instructions on the display.
Set your group.
You need to set a group you join at the first startup.
新しいグループを作る (Make a new group)
. . . . You can make a new group as a manager. Make a new group following the
instructions on the display.
グループに参加 (Join a group)
. . . . You can join a group already created. Join the group following the instructions
on the display.
Every user can join only one group.
302
時刻表ウィジェット (Timetable Widget)
With this Widget application, you can download the timetable
and check the countdown of minutes/seconds until the train’s
departure. The schedule registration function is also provided
to notify you of the departure time by sounding an alarm. You
can update the timetable from the menu, and search for the
nearest station using the GPS function.
You are separately charged a packet communication fee.
For details, refer to “ヘルプ (Help)” in the menu.
Powered by JR Travel Navigator
Software list時刻表ウィジェット (Timetable Widget)
Read “免責事項 (Exemption clause)” thoroughly
i(
Select an item.
駅名入力／時刻表登録 (Enter station name/Store timetable)
. . . Stores the timetable of the station you want to use.
全体設定／ヘルプ／免責事項 (Whole setting/Help/Exemption clause)
. . . Sets a font size, and displays “ヘルプ (Help)” and “免責事項 (Exemption
clause)”.
アプリ終了 (End application)
. . . Ends this application.
楽オク☆アプリ (Rakuoku ☆ Application)
地図アプリ (Map Application)
“楽オク☆アプリ (Rakuoku ☆ Application)” enables you to
easily exhibit your goods on Rakuoku whenever you want
wherever you are. The instruction guides you through
exhibition procedures, and you can make “体験出品 (trial
entries)”, so you can use it easily even if you are a beginner.
As the “かんたん入力 (Easy entering)” function and the
convenient functions such as shooting/editing photos and
saving records are available, you can exhibit your goods in a
※The display is for reference.
shorter time than you do on sites.
The actual one may differ.
You need to agree with “利用規約 (Usage rules)” when you
use this program for the first time.
You are separately charged a packet communication fee.
For details on Rakuoku, refer to “Mobile Phone User’s Guide [i-mode] FOMA version”.
To exhibit on Rakuoku, you need to subscribe to the Rakuten membership and register
on My menu.
For the information about Rakuoku, refer to i-mode site (in Japanese only).
i-mode site: iMenu→オークション (Auction)
■Widget αppli Supported (see page 311)
The information of the goods recommended by Rakuoku or the
goods you exhibit/bid for is displayed, so you can easily check
the auction state.
ｉアプリバンキング (i-αppli Banking)
i-Îąppli Banking is an i-Îąppli program that enables you to
conveniently use mobile banking (check your account balance
and deposit/withdrawal details, and transfer/shift money, etc.)
from your FOMA terminal. You can use up to two financial
institutions by entering your specified password at the startup
of the i-Îąppli program. You can pay bills/payment notices also
by Pay-easy.
To use mobile banking on i-Îąppli Banking, you need to have
※The display is for reference.
the bank account and subscribe to the Internet banking
The actual one may differ.
service of each bank.
You are separately charged a packet communication fee.
For details on i-αppli Banking, refer to “Mobile Phone User’s Guide [i-mode] FOMA
version”.
For the information about i-Îąppli Banking, refer to i-mode site (in Japanese only).
i-mode site: iMenu→メニューリスト (Menu List)
→モバイルバンキング (Mobile Banking)
→
ｉアプリバンキング (i-αppli Banking)
QR code for
accessing the site
■Widget αppli Supported (see page 311)
With i-Îąppli Banking Widget, you can easily start i-Îąppli
Banking by entering your password on the Widget display, and
can use your registered financial institutions and optional
functions more conveniently.
303
i-Îąppli/i-Widget
QR code for
accessing the site
This is a convenient i-Îąppli program that enables you to read the map of the place you
are currently in or you specify, check area information, or navigate yourself to the
destination by using the location information. You can search for information of facilities
which are useful in a time of disaster. Further, using Chizu Talk function, you can
exchange messages with your friends on the map.
See page 329 for details on operations.
Start! ｉウィジェット (Start! i-Widget)
“Start! ｉウィジェット (Start! i-Widget)” is an application
program that enables you to watch how to use i-Widget
through a moving picture.
Further, you can access and display the i-mode site where you
can download application programs other than the ones stored
in the FOMA terminal.
You are charged a packet communication fee when you
※The display is for reference.
select “ダウンロード (Download)” and access i-mode.
The actual one may differ.
i-Îąppli/i-Widget
マクドナルド トクするアプリ
(McDonald’s TOKUSURU KEITAI application)
You can quickly check the attractive information such as
McDonald’s new products. You can download “かざすクーポ
ン (Coupon for scanning)”, the discount coupon usable in
McDonald’s shops.
Before using “かざすクーポン (Coupon for scanning)”, you
need to subscribe on “トクするケータイサイト (TOKUSURU
KEITAI site)”. Then, select/set your favorite coupon from the
application, and place it over a scanning device at a
© 2009 McDonald’s
McDonald’s shop.
For the information about “マクドナルド トクするアプリ
※The display is for reference.
The actual one may differ.
(McDonald’s TOKUSURU KEITAI application)”, refer to
“トクするケータイサイト (TOKUSURU KEITAI site)”, the McDonald’s official site (in
Japanese only).
i-mode site:iMenu → メニューリスト (Menu List) → グルメ／レシピ (Gourmet/
Recipe) → マクドナルド
トクする (McDonald
TOKUSURU)
“かざすクーポン (Coupon for scanning)” is not available at the shops in some area. In
those areas, “見せるクーポン (Coupon for showing)” is available.
Even if you have not subscribed to “トクするケータイサイト (TOKUSURU KEITAI
site)”, you can browse “おすすめ情報 (Recommendation news)”.
The functions and service contents of “マクドナルド トクするアプリ (McDonald’s
TOKUSURU KEITAI application)” are subject to change.
You are separately charged a packet communication fee.

Start the application
Select a coupon and the number of sheets you use
Press “決定 (OK)” to complete the setting of coupon information
Order by placing the coupon over a scanning device at a shop.
■Widget αppli Supported (See page 311)
When McDonald’s “おすすめ情報 (Recommendation news)” is
updated, the McDonald’s signboard of Widget αppli turns
around to tell you the update.
When you select the signboard, “おすすめ情報
(Recommendation news)” is displayed.
You can read more detailed information by pressing
“もっと詳しく (More detail)” in “おすすめ情報
(Recommendation news)”.
iWウォッチ (iW Watch)
“iWウォッチ (iW Watch)” application enables you to check a
watch or battery level on a graphical i-Widget.
You can change the designs and colors according to your
taste.
※The display is for reference.
The actual one may differ.
304
株価アプリ (Stock Prices Application)
P-SQUARE INFO
“P-SQUARE INFO” is a Widget application that periodically
distributes the updated information and recommendable
content of maker’s site P-SQUARE.
If you select displayed information, the i-mode browser starts
and then P-SQUARE opens.
You are separately charged a packet communication fee.
Š Millmo Inc.
付箋 (Sticky)
Sticky is a Widget application that enables you to easily create,
edit, and browse sticky notes. You can store up to 300
characters, up to 50 items. You can change colors and display
positions of sticky notes.
ROID ウィジェット (ROID Widget)
Googleモバイル (Google Mobile)
Š team ROID
※The display is for reference.
The actual one may differ.
“Googleモバイル (Google Mobile)” is a useful application
program that enables you to use the mobile web search
function. You can easily enter the trendy words and keywords
you entered in the past. You can easily call up the helpful
Google services such as Mail Service (Gmail) and Train Route
Search.
You are separately charged a packet communication fee.
※The display is for reference.
The actual one may differ.
305
i-Îąppli/i-Widget
“ROID Widget” is a Widget application with which a cartoon
character called Mr. ROID lets you know of updated
information (informtaion of traial version, moving pictures, site
updates, etc.) about the mobile site “ROID”.
Actions and comments of Mr. ROID vary according to updated
information of the mobile site “ROID”. You can view details of
updated information by moving from “ROID Widget” to the
mobile site “ROID”.
You need to agree with “利用規約 (Usage rules)” when you
use this program for the first time.
You are separately charged a packet communication fee.
Type of index
“株価アプリ (Stock Prices Application)”
enables you to easily check stock prices (Nikkei225/TOPIX/
Hercules index)
on i-Widget.
The stock prices index you can check
Chart
are: Nikkei225, TOPIX, and Hercules
Present index
index.
value
You can check the present index value
and its up/down from the day before.
Change of index
※The display is for reference.
You can switch the charts among “日中足
The actual one may differ.
(intraday)”, “日足 (daily)”, “週足 (weekly)”,
and “月足 (monthly)”.
You need to agree with “利用規約 (Usage rules)” when you use this program for the
first time.
You are separately charged a packet communication fee.
The present index value is the information with a delay of about 20 minutes.
The information from this application program is not for buying/selling stocks nor for
supporting them.
We take all possible measures to ensure the contents of information of this application
program, but this does not provide guarantees to the contents. Note that we at
DOCOMO and the Information Provider cannot be held responsible for the loss due to
the information from this application program.
FOMA 通信環境確認アプリ
(FOMA Communication Environment Check Application)
“FOMA 通信環境確認アプリ (FOMA Communication
Environment Check Application)” enables you to check
whether the FOMA terminal is available at the FOMA
High-Speed Area.
Use “FOMA 通信環境確認アプリ (FOMA Communication
Environment Check Application)” with your consent to “ご利
用の注意 (Cautions in use)”.
Depending on the communication environment (such as
weather, radio wave conditions, network congestion state) at ※The display is for reference.
communication environment check, the different result or “out
The actual one may differ.
of service” might appear even in the same area or at the
same period of time.
You might not be able to check correctly if you use another function while using this
application program.
Preferred tone
You can set which sound to be output preferentially, from
MUSIC/1Seg or i-Îąppli program, for when you start an i-Îąppli
program during music playback or use of 1Seg.
MUSIC/1Seg or iÎąppli
ÎąBacklight
You can set the backlight operation for when an i-Îąppli
program is running.
Select an item.
Depend on system . . . . .Follows the setting of “Backlight”.
Depend on software . . . .Follows the setting of each
software program.
Constant light . . . . . . . . .Lights constantly.
ÎąPower saver
You can set to Power Saver Mode to decrease battery
consumption by temporarily suspending the i-Îąppli program
for when you close the FOMA terminal while i-Îąppli is running.
ON or OFF
This setting is valid from when you start an i-Îąppli program to
when you exit it.
Even when this function is set to “ON”, Power Saver Mode
becomes invalid if “Power saver” that can be set for each
i-αppli program is set to “OFF”.
ÎąVibrator
You can set the vibrator operation for when an i-Îąppli program
is running.
Depend on system or Depend on software
Depend on system . . . . .Does not work regardless of the
setting of “Vibrator”. With some
software programs, the vibrator
works.
Depend on software . . . .Follows the setting of each
software program.
Check settings
You can check each of “iαppli settings”.

i-Îąppli/i-Widget
Setting i-Îąppli
mi-ÎąppliiÎąppli settings
Do the following operations.
Auto start setting
See page 307.
Disp. software info
See page 291.
i-Widget roaming set.
See page 312.
i-Widget sound effect
See page 312.
iÎąppli call settings
iÎąppli call DL set. See page 309.
iÎąppli call sound
306
See page 309.
Information
<ÎąBacklight> <ÎąVibrator>
With some software programs, the backlight and vibrator settings are “OFF”.
Consequently, if you set “Depend on software”, the backlight and vibrator will not
work; if you want them to work, set “Depend on system”.
Auto Start Info
Starting i-Îąppli Automatically
You can make an i-Îąppli program start automatically at the set date and
time. Set the date and time for automatic start using Auto Start Time.
Auto Start Setting
You can set whether to enable automatic start of i-Îąppli programs.
mi-ÎąppliiÎąppli settingsAuto start setting
ON or OFF
Auto Start Time
You can set the date and time for automatic start. You can set for up to
three software programs.
Software listi(
Select start timeEnter the date and time to be set.
)Auto start time
Put a check mark for an item to be setl(
Time interval set . . . . Starts at an interval specified by the software program. The
setting is completed.
Start time set . . . . . . .Starts at the set start time automatically.
1 timeSelect a type of repeat.
If you select “Weekly”, put a check mark for days of the week to be set and press
l(
).
Press l(
).
mi-ÎąppliiÎąppli infoAuto start info
StartO . . . . Started automatically and properly.
StartX. . . . . Did not start automatically.
When “
” is displayed, you can press Oo(
software program.
Start– . . . . . Has not started yet.
) to start the
Information
Software programs do not start automatically in the following cases:
ポWhen the FOMA terminal is turned off
ポWhen the date and time are not set
ポWhen another function is working
ポDuring Lock All
ポDuring Personal Data Lock
ポDuring playback of animations/Flash movies
ポWhen the time set for automatic start is identical to the reserved time set for
“Software update”, or the time set for an alarm of “Alarm”, “Schedule”, “ToDo”, “TV
timer”, or “Timer recording”
ポWhen a start time has been specified to the same software program within 10
minutes from the previous auto-start
If automatic start fails, “
” appears on the desktop. Select the icon to show the
Auto Start Info.
Using i-Îąppli Call
With the i-Îąppli call function, you can call up your friends on the i-Îąppli
program to have online matches and to share the information with them.
With i-Îąppli calls, you are called up in two ways; directly by your friend or by the IP
(Information Service Providers).
Rejecting all i-Îąppli calls is also available.
For details, refer to “Mobile Phone User’s Guide [i-mode] FOMA version”.
307
i-Îąppli/i-Widget
You can check whether a software program has started automatically
and properly. Also, you can check the information of start failure from IC
card. Up to three records of automatic start, a record of automatic start
set by i-Îąppli, and a record of start failure from IC card are stored.
Send i-Îąppli Calls to Call up Members
While an i-Îąppli program which supports i-Îąppli call is
runningMake an i-Îąppli callYES
The operation differs depending on the i-Îąppli program.
Receive i-Îąppli Calls
When an i-Îąppli call comes in, the i-Îąppli call ring tone sounds and the
confirmation display appears asking whether to answer it.
i-Îąppli/i-Widget
Check i-Îąppli Call Logs
Up to 30 received i-Îąppli calls are recorded in i-Îąppli call logs, and you
can check how they were replied.
After 30 i-Îąppli calls are received, the older log is automatically deleted from the oldest
one, but the logs for the held i-Îąppli calls are not deleted. (If 30 logs are all for the held
calls, they are deleted.)
The i-Îąppli call confirmation display appears
Select an item.
Accept . . . . . . .Answers the i-Îąppli call. The target i-Îąppli program starts.
Reject . . . . . . . .Rejects the i-Îąppli call.
Hold. . . . . . . . . .Holds the i-αppli call. “
” appears at the top of the display, and
“
” appears on the desktop. Press Oo, highlight “
” and
press Oo to show the i-Îąppli call logs.
Some i-Îąppli calls activate the i-Îąppli program without showing the confirmation
display.
When you answer an i-Îąppli call, you might be charged a packet communication
fee.
While a display other than the Stand-by display is shown, only “
” tells you
the arrival of i-Îąppli calls.
When the target i-Îąppli program is already running, the operation varies
depending on the i-Îąppli program.
When the target i-Îąppli program is not found on the FOMA
terminal when you select “Accept”
The confirmation display might appear asking whether to download the target i-Îąppli
program or to access a site. Select “YES” to download it or to access the site. Select
“NO” to return to the Stand-by display. In this case, “Accept” is recorded on the i-αppli call
log.
308
mi-ÎąppliiÎąppli call logs
: Held i-Îąppli calls (not replied)
: Answered i-Îąppli calls
: Rejected i-Îąppli calls
: Expired i-Îąppli calls
Highlight a log for a held i-Îąppli call and press
Oo(
) to show again the confirmation display for
the i-αppli call. (See “Receive i-αppli Calls” on page 308)
To delete i-Îąppli call logs, press i(
), select “Delete this” or “Delete all”,
and then select “YES”. When you select “Delete all”, you need to enter your
Terminal Security Code.
Setting i-Îąppli Call
Software Setting (i-Îąppli Call)
You can set whether to allow each i-Îąppli program to start from i-Îąppli
calls. When you set to “OFF”, you cannot receive i-αppli calls for the set
i-Îąppli program.
Software listi(
)Software setting
iÎąppli callSelect an iteml(
ON . . . . . . . . . . Allows to start i-Îąppli programs from i-Îąppli calls.
OFF . . . . . . . . . Does not start i-Îąppli programs from i-Îąppli calls.
Even if you set to “OFF”, it might not become valid depending on the i-αppli
program.
i-Îąppli Call Download Setting
You can set whether to reject the i-Îąppli download notice for when a
target i-Îąppli program for i-Îąppli calls is not found.
mi-ÎąppliiÎąppli settingsiÎąppli call settings
iÎąppli call DL set.Rejector Not reject
i-Îąppli Call Sound
You can set the operation for when an i-Îąppli call is received.
mi-ÎąppliiÎąppli settingsiÎąppli call settings
iÎąppli call soundDo the following operations.
Select a folderSelect a ring tone.
While selecting a ring tone, you can check the selected tone.
Ring time setting
You can set a ring time for i-Îąppli call ring tone.
Enter a ring time (seconds).
Enter two digits from “00” through “15”.
Select vibrator
Select a vibration pattern.
If you select “Melody linkage”, the FOMA terminal vibrates in
time with ring tone.
While selecting a vibration pattern, you can check the selected
vibration.
Select illumination Select an item.
While selecting an item, you can check the lighting/flickering of
the Call/Charging indicator.
Operating i-Îąppli Stand-by Display
Software Setting (Stand-by Set)
You can set an i-Îąppli program for the Stand-by display. Once set, the
i-Îąppli Stand-by display automatically appears each time you show the
Stand-by display.
Software listi(
)Software setting
Stand-by setON or OFFl(
“
” is displayed for the software program set as the Stand-by display.
“
” or “
” is displayed while an i-αppli Stand-by display is running.
To operate an i-Îąppli program as a normal i-Îąppli program
when an i-Îąppli Stand-by display is running
From the i-Îąppli Stand-by display, press <.
“
” or “
” changes to a blinking “
” or “
” and then you can operate the i-αppli
program as a normal one.
To return to the i-Îąppli Stand-by display, press and hold r for at least one second or
press h; then select “Ended”. To release the i-αppli Stand-by display, select
“Terminated”, and select “YES”.
Information
If you turn off the FOMA terminal while the i-Îąppli Stand-by display is running, the
confirmation display appears asking whether to start the i-Îąppli program when you
turn on the power again.
You can set only one software program for the i-Îąppli Stand-by display.
Some i-Îąppli programs cannot be set for the Stand-by display.
With some software programs set as the i-Îąppli Stand-by display, you can press a key
to go from the normal i-Îąppli status to the i-Îąppli Stand-by display status. However,
you cannot return to the i-Îąppli Stand-by display if another menu function is running.
Note that you might not be able to receive timely information if you have set “Stand-by
net” of “Software setting” to “OFF”.
You cannot use the Web To function and the Phone To/AV Phone To function from
the i-Îąppli Stand-by display.
If the software program which connects to the network is set for the i-Îąppli Stand-by
display, it might not operate successfully because of radio wave conditions or other
factors.
309
i-Îąppli/i-Widget
Select ring tone

Information
When you show the Stand-by display while a menu function is operating, the image
set for “Stand-by display” of “Display setting” is displayed, even when the i-αppli
Stand-by display is set.
When the communication is extremely frequent in a certain period of time while an
i-Îąppli program is running as the i-Îąppli Stand-by display, the confirmation display
appears. When you press .<, the confirmation display appears asking whether to
continue communication.
When you close the FOMA terminal, the display shifts to the pause state regardless of
“αPower saver” or “Power saver” of the Function menu.
If you set Lock All or Personal Data Lock when the i-Îąppli Stand-by display is shown,
the i-αppli Stand-by display ends. If you set Lock All, the image set for “Stand-by
display” of “Display setting” is displayed and if you set Personal Data Lock, the default
Stand-by display is displayed. The i-Îąppli Stand-by display returns when you release
each lock. However, when “Display setting” is set to “Accept” for “Customize” of
Personal Data Lock, the Stand-by display you had set before you set the i-Îąppli
Stand-by display is displayed during Personal Data Lock.
Software Setting (Stand-by Net)
i-Îąppli/i-Widget
You can set whether to permit communication for when the i-Îąppli
Stand-by display is running.
Software listi(
)Software setting
Stand-by netON or OFFl(
End Stand-by Info
When the i-Îąppli Stand-by display does not end successfully, you can
check the date/time and its reason.
mi-ÎąppliiÎąppli infoEnd stand-by info
When “
” is displayed on the End Stand-by Info display, press
i(
), and select “Copy info” to copy the information. Select “Delete info”,
and select “YES” to delete the information.

Displaying i-Îąppli Data Files on the
microSD Card
Depending on the i-Îąppli program, you can save its data files on the
microSD card.
You can display the i-Îąppli data files saved on the microSD card.
mi-ÎąppliiÎąppli(microSD)iÎąppli data
Function Menu while i-Îąppli Data File is Displayed
Folder info
You can display the information of the software program that uses
the selected folder, available/unavailable for folder usage, and the
reason if unavailable.
Delete folder
You can delete the selected folder and files in the folder.
Enter your Terminal Security CodeYES
End Stand-by Display
You can temporarily end the running i-Îąppli Stand-by display. Also, you
can release the i-Îąppli Stand-by display.
mSet./ServiceDisplayDisplay setting
Stand-by displayEnd iÎąppli display
End or Terminate
When you select “Terminate”, select “YES”.
310
i-Widget
Using i-Widget
i-Widget is a useful function that enables you to access the
frequently-used contents such as the calculator, clock, and stock price
information (Widget Îąppli) by pressing the i-Widget key (r).
You can add Widget Îąppli programs by downloading from sites offered
by IPs (Information Providers). (See page 290)
Also, you can paste multiple (up to eight) Widget Îąppli programs to the
i-Widget display to customize it to your taste.
Multiple Widget Îąppli programs might communicate when you show the i-Widget
display.
You are separately charged a packet communication fee for downloading Widget Îąppli
programs or showing the i-Widget display.
As for overseas use, you are charged a packet communication fee each time a Widget
Îąppli program communicates.
For details on i-Widget, refer to “Mobile Phone User’s Guide [i-mode] FOMA version”.
■Widget αppli list
See page 302
See page 302
楽オク☆アプリ (Rakuoku ☆ Application)
See page 303
地図アプリ (Map Application)
See page 303
ｉアプリバンキング (i-αppli Banking)
See page 303
Start! ｉウィジェット (Start! i-Widget)
See page 304
マクドナルド トクするアプリ
(McDonald’s TOKUSURU KEITAI application)
See page 304
iWウォッチ (iW Watch)
See page 304
P-SQUARE INFO
See page 305
付箋 (Sticky)
See page 305
ROID ウィジェット (ROID Widget)
See page 305
株価アプリ (Stock Prices Application)
See page 305
Googleモバイル (Google Mobile)
See page 305
Press r.
i-Widget starts.
When any Widget Îąppli program is running, the i-Widget
display is displayed. When no Widget Îąppli program is
running, the Widget Îąppli list is displayed.
You can start i-Widget also by selecting a Widget Îąppli
program from the Software list.
You cannot start i-Widget from the horizontal Stand-by
display even by pressing r.
i-Widget display
Information
With i-Widget, you can simultaneously start and show up to eight Widget Îąppli
programs. When you switch Widget Îąppli programs to be displayed while eight
Widget Îąppli programs are running, end an unwanted Widget Îąppli program and then
start another one from the Widget Îąppli list. See page 313 for ending a Widget Îąppli
program.
If you have not operated for three minutes from the Widget Îąppli list or i-Widget
display, the Stand-by display automatically returns. The Stand-by display does not
automatically return from the Widget Îąppli operation display.
Even if you end i-Widget while a pre-installed Widget Îąppli program is running and
change the UIM or initialize the FOMA terminal, the Widget Îąppli program does not
end and remains running as launched from i-Widget.
311
i-Îąppli/i-Widget
ファミリー伝言板 (Family Message Board)
時刻表ウィジェット (Timetable Widget)
Start i-Widget
After starting i-Widget, you can simultaneously start multiple Widget
Îąppli programs. You can show the multiple running Widget Îąppli
programs on the i-Widget display.
■About i-Widget display
End i-Widget
You can end i-Widget to return to the Stand-by display.
Widget Îąppli list/i-Widget display/Widget Îąppli operation
displayh
You can return to the Stand-by display also by pressing r or
m[戻る (Return)] from the i-Widget display.
For the Widget Îąppli operation display, the confirmation display appears asking
whether to finish it.
Widget Îąppli list
Setting i-Widget
i-Widget display
Widget Îąppli operation
display
Widget Îąppli display
On the Widget αppli list, all Widget αppli programs are displayed and “ACTIVE” is
displayed for the running Widget Îąppli program.
On the i-Widget display/Widget Îąppli operation display, each application program is
shown in running state.
i-Îąppli/i-Widget
: Widget Îąppli
i-Widget Roaming Setting
You can set whether to communicate via i-Widget overseas.
mi-ÎąppliiÎąppli settingsi-Widget roaming set.
ON or OFF
Information
When you arrive at a destination overseas, the setting changes to “OFF” and the
confirmation display appears when you start i-Widget.
: i-Îąppli DX compatible Widget Îąppli
: Widget Îąppli for communication
: GPS compatible Widget Îąppli
: Osaifu-Keitai compatible Widget Îąppli
: Downloaded from an SSL/TLS page
Navigation display
Navigation that corresponds to the key operation is displayed.
i-Widget Sound Effect
You can set whether to sound an effect tone at the start of i-Widget.
mi-ÎąppliiÎąppli settingsi-Widget sound effect
ON or OFF
Information
Shuffle i-Widget
You can change the position of Widget Îąppli programs on the i-Widget
display. You cannot specify each position as it is automatically changed.
i-Widget displayi[シャッフル (Shuffle)]
312
The effect tone at the start of i-Widget sounds at the volume set for “Phone” of “Ring
volume”. It sounds at Level 2 when “Step” is set.

Starting Widget Îąppli
Widget Îąppli list
Select a Widget Îąppli program to be started.
You can show the Widget Îąppli operation display.
You can start a Widget Îąppli program also by selecting it from the Software list.
You can show the Widget Îąppli operation display also by selecting a running
Widget Îąppli program.
You can show the i-Widget display by pressing r or m[戻る (Return)] from
the Widget Îąppli operation display.
End Widget Îąppli
i-Widget display/Widget Îąppli operation display
Highlight a Widget Îąppli program to be ended and
press c[アプリ終了 (END Widget αppli)]YES
End Widget Appli Inf
i-Îąppli/i-Widget
When a Widget Îąppli program does not end successfully, you can check
the date/time and its reason.
mi-ÎąppliiÎąppli infoEnd Widget appli inf
When “
” is displayed on the End Widget αppli Inf display, press
i(
), and select “Copy info” to copy the information. Select “Delete info”,
and select “YES” to delete the information.
313
314
Osaifu-Keitai/ToruCa
Osaifu-Keitai . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
iC Transfer Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Starting Osaifu-Keitai Compatible i-Îąppli
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 
Locking IC Card Function . . . . . . . . . . . . . . . . . 
Checking Owner Information of IC Card
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 
ToruCa . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Receiving ToruCa . . . . . . . . . . . . . . . . 
Displaying ToruCa . . . . . . . . . . . . . . . . . . . . . 
How to See ToruCa File List/Detailed ToruCa File Display . . .
Setting ToruCa . . . . . . . . . . . . . . . . . . . . . . . 
316
316
317
318
318
318
319
320
322
325
315
Osaifu-Keitai
Osaifu-Keitai/ToruCa
Osaifu-Keitai mounts the IC card, so you can make payment and others
just by placing the FOMA terminal over the scanning device in a shop.
Further, you can use communications to deposit electronic money or to
check your account for balance or usage histories. Security is fully
secure※1 so that you can make use with a sense of security.
For details on Osaifu-Keitai, refer to “Mobile Phone User’s Guide [i-mode]
FOMA version”.
To use the Osaifu-Keitai compatible service, you need to download the Osaifu-Keitai
compatible i-αppli program from the Osaifu-Keitai compatible site※2 (in Japanese only)
to make the settings.
※1 You can use Omakase Lock and IC Card Lock. (See page 127 and page 318)
※2 iMenu→メニューリスト (Menu List)→おサイフケータイ (Osaifu-Keitai)
Data on the IC card (including electronic money, reward points, etc.) might be lost or
deformed owing to the malfunction of the FOMA terminal. (When we keep your FOMA
terminal for repair, we cannot keep it with data files left, so the data files shall be
deleted beforehand by yourself as a rule.) For supports such as reissue, restoration,
temporary storage, or transfer of data files, consult the service provider which supports
Osaifu-Keitai, except for the data transfer by iC transfer service. For your important
data files, be sure to use the service with backup support.
In any case including malfunction or model change, we cannot be held responsible for
the loss or deformation of data on the IC card or other losses caused regarding
Osaifu-Keitai compatible services.
If your FOMA terminal is stolen or lost, inquire of the provider for Osaifu-Keitai
compatible service you use about ways of dealing with the trouble, immediately.
316
iC Transfer Service
iC transfer service※1 is the service for moving※2 a package of data
files※3 on the IC card of your Osaifu-Keitai to your new Osaifu-Keitai
when you replace your Osaifu-Keitai such as at the time of phone model
change or malfunction.
After moving data files on the IC card, just download※4 an Osaifu-Keitai
compatible i-Îąppli program, and then you can use the Osaifu-Keitai
services continuously. iC transfer service is available at the service
counters such as a nearby docomo shop.
For details on iC transfer service, refer to “Mobile Phone User’s Guide
[i-mode] FOMA version”.
※1 Both the transferring end and transferred end have to be the FOMA terminal that
supports iC transfer service. Visit a nearby counter such as a docomo shop to use
iC transfer service.
※2 This service is not for “copying” but for “moving” data files, so no data files on the IC
card remain in the FOMA terminal at the transferring end. iC transfer services is not
available for some cases, so use backup services for Osaifu-Keitai compatible
services.
※3 Some Osaifu-Keitai compatible services do not cover iC transfer service, and you
can move only the files on the IC card of the Osaifu-Keitai compatible service that
covers iC transfer service.
※4 You are charged a packet communication fee for downloading i-αppli programs and
respective settings.

Starting Osaifu-Keitai Compatible i-Îąppli
Read and Write Data inside the IC Card
You can start the Osaifu-Keitai compatible i-Îąppli from the Software list.
By using Osaifu-Keitai compatible i-Îąppli, you can read/write the data
inside the IC card and use convenient functions such as depositing
electronic money or checking your account for the balance and usage
details on the mobile phone.
Take care of your Terminal Security Code and password used for each service not to
reveal to anyone.
When you start or download the Osaifu-Keitai compatible i-Îąppli program for the first
time, the message “Use IC card for current UIM?” appears. When you select “YES”,
you cannot use the IC card function afterward unless you insert the same UIM.
To use the IC card function with another UIM, delete all the information of the IC card
by “Change IC owner”, and then delete all the Osaifu-Keitai compatible i-αppli
programs other than “iD 設定アプリ (iD appli)”. Otherwise, you cannot use it.
Reading and writing data from the software program and to the IC card is suspended in
the following cases:
In that case, the read or written data is discarded. The operation after the
communication ends differs depending on the service you use.
ポWhen a call comes in while an i-ιppli program is running
ポWhen the battery goes flat
mOsaifu-KeitaiIC card content
The list of the Osaifu-Keitai compatible i-Îąppli programs is displayed. When you
select an i-Îąppli program, it starts up.
See page 291 for the Software list.
Even during a call or i-mode access, you can use Osaifu-Keitai by placing the f
mark over the scanning device.
Place the f mark of the FOMA terminal over the
scanning device to use the target service.
The Call/Charging indicator lights when you bring your FOMA terminal close to a
scanning device and communication becomes ready.
Place the f mark of the FOMA
terminal over the scanning device.
Information
Mount the battery pack to use Osaifu-Keitai. Even when the power is turned off or
when the battery has gone flat, you can use Osaifu-Keitai by placing the f mark
over the scanning device, however, you cannot start the Osaifu-Keitai compatible
i-Îąppli. You might not be able to use Osaifu-Keitai if you have left the battery unused
for a long period or not charged it after the low battery alarm sounds. Charge the
battery.
When the f mark of the FOMA terminal placed over the scanning device is not
identified, slightly move the mark forwards, backwards, to left, or to right.
Osaifu-Keitai compatible i-Îąppli might start when you place the FOMA terminal over
the scanning device.
317
Osaifu-Keitai/ToruCa
Use Osaifu-Keitai
Place the f mark of the FOMA terminal over the scanning device, and
you can use the FOMA terminal as electronic money to pay for shopping
or to use it as a traffic ticket. This function is available without starting
the software program.

Locking IC Card Function
Checking Owner Information of IC Card
To prevent the IC card function from being used by others, you can set
the Osaifu-Keitai, received ToruCa, or iC communication disabled.
You can check whether IC owner information required for using the IC
card is consistent with the information of the currently inserted UIM.
If the battery runs out while IC Card Lock is set, the IC card stays locked.
Press and hold m for at least one second.
“ ” appears and IC Card Lock is set.
To release IC Card Lock, perform the same operation and enter your Terminal
Security Code. When Timer Lock ON At Close is set and “Lock OFF at open” is
set to “ON”, the display for releasing IC Card Lock appears also by opening the
FOMA terminal.
When “PIM/IC security mode” is set to “Face reader”, follow the operation of “Use
Face Reader to Release Lock” on page 133.
When it is set to “Double security”, enter your Terminal Security Code after the
operation on page 133.
IC Lock (Power-off)
You can set whether to lock the IC card function while the power is
turned off.
Osaifu-Keitai/ToruCa

mSet./ServiceLock/SecurityLock setting
or
mOsaifu-KeitaiIC card lock set.
IC lock (power-off)
Enter your Terminal Security CodeSelect an item.
Setting before OFF . . . . Follows the setting just before turning off the power.
Lock . . . . . . . . . . . . . . . . Sets IC Card Lock.
318
mOsaifu-KeitaiCheck IC owner
When the UIM differs from the stored one, select “Change” and reset the data on
the IC card, and then you can newly store the UIM information.
Change IC Owner
You can reset the IC owner information by deleting data on the IC card.
After resetting, you can newly register information of currently inserted
UIM.
When you initialize the IC owner information, the Osaifu-Keitai compatible i-Îąppli
programs except “iD 設定アプリ (iD appli)” are deleted. However, they might not be
deleted depending on your usage state, so you need to delete them separately.
mOsaifu-KeitaiChange IC ownerResetYES
Enter your Terminal Security CodeYES

ToruCa
ToruCa is an electronic card that you can receive with Osaifu-Keitai for
use as fliers, restaurant cards, and coupon tickets.
You can receive ToruCa files from scanning devices or sites and can
easily exchange them using mail, infrared ray, or a microSD card.
The received ToruCa files are saved to “ToruCa” of “Osaifu-Keitai”.
For details on ToruCa, refer to “Mobile Phone User’s Guide [i-mode] FOMA version”.
■Flow for using ToruCa

Receiving ToruCa
Receive from Scanning Device
Place your Osaifu-Keitai over a scanning
device to receive a ToruCa file.
You can receive the ToruCa file from a scanning device using the IC card
function. By receiving detailed information, a ToruCa file becomes a
ToruCa file (details) which has more pieces of information.
For a ToruCa file before receiving the details, you can download up to 1 Kbyte per file,
and for a ToruCa file (details), you can download up to 100 Kbytes per file.
Place the f mark of the FOMA terminal over the
scanning device.
You can view more detailed information by using “詳細 (Details)” key.
■Sources of ToruCa files
When a ToruCa file is received
Scanning device
microSD card
i-Îąppli
Data broadcasting
Data Storage Center
Mail, infrared
communication,
iC communication
Update/Save
ToruCa files to Data
Storage Center.
Exchanges ToruCa
files between
i-mode terminals.
319
Osaifu-Keitai/ToruCa
Site
QR code
A ToruCa-received tone sounds, the Call/Charging indicator lights.
When “Recv. ToruCa display” is set to “ON”, detailed display of received ToruCa file
appears.
For a ToruCa file before receiving detailed information, the confirmation display
appears asking whether to connect to a site to download detailed information. Select
“YES” to display a ToruCa file (details) with detailed information received. Select “NO”
to display a ToruCa file without detailed information.
If no keys are pressed for about 15 seconds or “Recv. ToruCa display” is set to “OFF”,
“
” appears on the desktop.
Press Oo, highlight “
”, and press Oo(
); then the ToruCa File list appears.
About Auto-reading Function of ToruCa
If you set “Auto reading ToruCa” to “Accept” to use the ToruCa files by placing the FOMA
terminal over the scanning device, the available ToruCa files are automatically
recognized. The used ToruCa files are converted into “Used” and then moved to the
“Used ToruCa” folder. Up to 20 used ToruCa files are saved, and when the number of
the files exceeds 20, the files are deleted from the one downloaded at the oldest date.
Even if “Auto reading ToruCa” is set to “Reject”, the confirmation display might appear
asking whether to use “Auto reading ToruCa” when you place the FOMA terminal over
the scanning device. To use ToruCa files, select “YES”, and then set “Auto reading
ToruCa” to “Accept”.
Information
When you fail to receive a ToruCa file, the ToruCa failed-to-received tone sounds,
and the Call/Charging indicator lights.
A ToruCa-received tone and a ToruCa failed-to-receive tone sound at the volume set
for “Phone” of “Ring volume”.
Depending on the settings by IPs (Information Providers), you might not be able to
update ToruCa files or send them by mail or infrared rays.

When receiving detailed information from a ToruCa file
A ToruCa file before receiving detailed information itself does not show the detailed
information. Select “詳細 (Details)” on the ToruCa file display and select “YES” to
connect to the site to receive more detailed information.
After receiving the detailed information, the ToruCa file is overwritten and saved.
Information
You are charged the ordinary packet fee for receiving.
Function Menu of the ToruCa Folder List
Operate folder
Add folder
You can create a user folder. You can create up to 20 folders.
Enter a folder name.
You can enter up to 10 full-pitch/20 half-pitch characters for
the FOMA terminal.
You can enter up to 31 full-pitch/63 half-pitch characters for
the microSD card.
Edit folder name
You can edit the folder name for the user folder.
Enter a folder name.
You can enter up to 10 full-pitch/20 half-pitch characters for
the FOMA terminal.
You can enter up to 31 full-pitch/63 half-pitch characters for
the microSD card.
Delete folder
All ToruCa files in the folder are deleted.
Enter your Terminal Security CodeYES
Osaifu-Keitai/ToruCa
Displaying ToruCa
You can display ToruCa file received by the IC card function or from sites
or mail.
mOsaifu-KeitaiToruCa
Select a folder.
Each time you press m from the ToruCa Folder list,
ToruCa Folder list
you can switch folders between the FOMA terminal and
the microSD card.
When the folder contains unread ToruCa files, “
” appears.
Select a ToruCa file.
320
Search all folders
Auto-sort
You can search through all ToruCa files in the FOMA terminal
(except ToruCa files stored in the “Used ToruCa” folder) by
specifying a search condition.
Select a search condition.
Genre. . . .Select a genre.
Press l(
) to display a list of category
icons belonging to the genre.
Title . . . . .Enter characters to be searched for, from those in
the title.
Index . . . .Enter characters to be searched for, from those in
location data.
You can enter up to 20 full-pitch/40 half-pitch characters for
the Title search, and up to 10 full-pitch/20 half-pitch
characters for the Index search.
You can copy the ToruCa files together with the folder from
the FOMA terminal to the microSD card.
CPY all to microSD You can copy all the ToruCa files together with the folder from
the FOMA terminal to the microSD card.
Enter your Terminal Security CodeYES
Copy to phone
You can copy the ToruCa files together with the folder from
the microSD card to the FOMA terminal.
Copy all to phone
You can copy all the ToruCa files together with the folder from
the microSD card to the FOMA terminal.
Add or OverwriteEnter your Terminal Security Code
YES
When you select “Overwrite”, the confirmation display
appears telling that the ToruCa files in the FOMA terminal
will be deleted.
Connect to Center
See page 139.
All ToruCa disp.
You can display all the ToruCa files stored in the FOMA
terminal.
You can display them also by pressing c(
).
Ir/
transmission
Send all Ir data
All
See page 384.
transmission See page 385.
Memory info
You can display the used memory space (estimate)/the
number of saved files.
Delete all
You can delete all the ToruCa files stored in the FOMA
terminal.
Enter your Terminal Security CodeYES
Select storage
You can set a destination folder for when copying from the
FOMA terminal to the microSD card.
YES
Copy
321
Osaifu-Keitai/ToruCa
You can set to automatically sort and save the ToruCa files
that satisfy the conditions set to the folder for when you
receive them from a scanning device or automatically receive
them from data broadcasting while watching a 1Seg program.
Select a sorting condition.
Genre. . . . . Put a check mark for the genre to sort into and
press l(
). You can put it for multiple
genres.
Title . . . . . . Enter characters from those in the title, to be a
sorting condition.
Index . . . . . Enter characters from those in the location data,
to be a sorting condition.
Release . . . Select “YES” to release the sorting condition you
specified.
You can enter up to 20 full-pitch/40 half-pitch characters for
the Title sort, and up to 10 full-pitch/20 half-pitch characters
for the Index sort.
When a sorting condition is already specified for the folder, it
is displayed. Press i(
) to set a sorting condition
again.
Copy to microSD
Information

“
” is displayed when the Genre sort is set, “
” is displayed when the Title sort is
set, and “
” is displayed when the Index sort is set.
When a file satisfies multiple conditions, it is sorted into the top of the folder in the
ToruCa Folder list.

The ToruCa file (details) is copied as a ToruCa file before receiving details if it
contains the data file with the UIM security or whose output from the FOMA terminal is
prohibited.

The ToruCa files in the “ToruCa” folder within the FOMA terminal are saved to “SD
ToruCa” on the microSD card.

The ToruCa files in “SD ToruCa” on the microSD card are added or overwritten and
then saved to the “ToruCa” folder in the FOMA terminal.

“
” is displayed for the folder set as a destination.
When you execute Check microSD, or create or edit a folder by using a personal
computer, the destination folder on the microSD card might be changed. When the
setting is changed, set the destination folder again.
How to See ToruCa File List/Detailed
ToruCa File Display
ToruCa File list
Detailed ToruCa File display Detailed ToruCa File display
(for ToruCa file)
[for ToruCa file (details)]
State of ToruCa file
※1
Unread ToruCa file
Read ToruCa file
Used ToruCa file
Osaifu-Keitai/ToruCa
※2
FOMA terminal incompatible ToruCa file
※1 Does not apply to the ToruCa file downloaded from a site.
※2 Appears for only the ToruCa file on the microSD card.
“ ” is added to the expired ToruCa file.
“
” is added to the ToruCa file whose output from the FOMA terminal is prohibited.
Category
Displays a category icon that matches the contents of the ToruCa file.
Index file
Displays the location data of the publisher of the ToruCa file information.
Title
Date and time the ToruCa file was received
ToruCa information
Summary and the “詳細 (Details)” key are displayed for a ToruCa file. Publisher
information is displayed for a ToruCa file (details).
322
Function Menu of the ToruCa File List/Detailed ToruCa File
Display
Attach to mail
Move
You can compose an i-mode mail message with the ToruCa
file attached.
Go to step 2 on page 146.
You can compose it also by pressing l(
).
Connect to Center
[List only]
See page 139.
ToruCa folders
[List only]
You can display the ToruCa folder list.
You can display it also by pressing c(
Multiple-choice
[List only]
You can select multiple ToruCa files and operate them.
Put a check mark for ToruCa files to be selected
i(
)Select an item.
Move . . . . . . . . . . . . . See page 323.
Copy. . . . . . . . . . . . . . See page 323.
Copy to microSD . . . See page 323.
Copy to phone . . . . . See page 323.
Send Ir data. . . . . . . . See page 383.
Select all . . . . . . . . . . Selects all files.
Release all. . . . . . . . . Releases all selections.
Update ToruCa
[Detailed display only]
You can re-receive the information about the ToruCa file. The
re-received ToruCa file (details) is automatically overwritten
and then saved.
YES
You cannot update some ToruCa files.
See page 210 when ToruCa files are stored to the
maximum.
Select a destination folder.
You cannot select the “Used ToruCa” folder.
Search/sort
Search
[List only]
You can change the order of displayed files.
Select an order.
Copy
Copy
You can copy the displayed or highlighted ToruCa file to
another folder.
Select a destination folder.
You cannot select the “Used ToruCa” folder.
Copy to microSD
The files are copied to the folder as specified by “Select
storage” on page 321.
Copy to phone
You can copy the ToruCa file from the microSD card to the
ToruCa folder in the FOMA terminal.
Operate image
Save one image
You can save an image displayed on the ToruCa file.
[Detailed display only] Select an image
Go to step 2 on page 208.
Save some images You can save multiple images displayed on the ToruCa file.
[Detailed display only] Put a check mark for images to be savedl(
Go to step 2 on page 208.
Save all images
Among the images displayed on the ToruCa file, you can save
[Detailed display only] all the images that can be saved at one time.
Go to step 2 on page 208.
Save BG image
You can save the background image of the ToruCa file and
[Detailed display only] set it for the Stand-by display or Wake-up display.
Go to step 2 on page 208.
323
Osaifu-Keitai/ToruCa
Sort
[List only]
You can search through ToruCa file in the folder by specifying
a search condition.
Select a search condition.
Genre. . . .Select a genre.
Press l(
) to display a list of category
icons belonging to the genre.
Title . . . . .Enter characters to be searched for, from those in
the title.
Index . . . .Enter characters to be searched for, from those in
location data.
You can enter up to 20 full-pitch/40 half-pitch characters for
the Title search, and up to 10 full-pitch/20 half-pitch
characters for the Index search.
).
Retry
You can play back an animation image or Flash movie in the
[Detailed display only] ToruCa file from the beginning.
When a part of the Flash movie is outside the display area,
the Flash movie might not be played back.
Add to phonebook
[Detailed display only]
See page 94.
Add desktop icon
See page 32.
Ir/
transmission
Send Ir data
transmission
Memory info
[List only]
See page 383.
See page 385.
You can display the used memory space (estimate)/the
number of saved files.
Osaifu-Keitai/ToruCa
Delete
Delete this
[List only]
YES
Delete selected
[List only]
Put a check mark for ToruCa files to be deleted
l(
)YES
Delete all
[List only]
You can delete all ToruCa files in the folder.
Enter your Terminal Security CodeYES
Delete
[Detailed display only]
YES
Information

The ToruCa file (details) that contains data whose output from the FOMA terminal is
prohibited is attached as a ToruCa file before receiving details.
You might not be able to attach the ToruCa file to i-mode mail depending on its file
size.

You cannot copy ToruCa files whose output from the FOMA terminal is prohibited.
324
Information

The ToruCa file (details) is copied as a ToruCa file before receiving details if it
contains the data file with the UIM security or whose output from the FOMA terminal is
prohibited.
When the number of files in the destination folder on the microSD card is full, a new
folder is automatically created and ToruCa files are saved to that folder.
When copying is completed, the message “Storage is changed to XXXXXXXX”
(XXXXXXXX denotes a folder name) appears.
The name of copied ToruCa file is TORUCXXX (XXX denotes a numeral).
When no folder is set as a destination folder on the microSD card, a new folder is
created automatically and the file is saved to the folder. After saving, the newly
created folder is set as the destination folder.
You might not be able to execute “Copy to microSD” for the ToruCa file depending on
its file size.

You might not be able to execute “Copy to phone” for the ToruCa file depending on its
file size.

Transparent GIF file (except animation GIF file) whose file extension is “ifm” is saved
as a frame or stamp.

Setting ToruCa
mOsaifu-KeitaiSettings
Do the following operations.
You can set whether to receive ToruCa file from a scanning
device using the IC card function or from another FOMA terminal
via iC transmission.
Accept or Reject
Auto reading
ToruCa
You can set whether to have the available ToruCa files
automatically recognized for when you place the FOMA terminal
over the scanning device.
Accept or Reject
Recv. ToruCa
display
You can set whether to display the detailed ToruCa File display
when you receive a ToruCa file while the Stand-by display is
shown.
ON or OFF
ToruCa from
dataBC
You can set whether to receive ToruCa files automatically from
data broadcasting while watching a 1Seg program.
Auto receive ON or Auto receive OFF
Check same
ToruCa
You can set whether to check the same ToruCa file is already
received before receiving a ToruCa file from a scanning device or
receiving a ToruCa file automatically from data broadcasting
while watching a 1Seg program.
ON or OFF
ON . . . . Checks and does not receive a new ToruCa file if the
same ToruCa file is already received.
OFF . . . Does not check. Receives even the same ToruCa file.
Osaifu-Keitai/ToruCa
Receive ToruCa
Information

If “Auto reading ToruCa” is set to “Reject”, you might not be able to use ToruCa files.

The ToruCa files stored in the “Used ToruCa” folder or expired ToruCa files are not
included in target files.
325
326
Map/GPS Function
Using GPS Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Checking Your Location . . . . . . . . . . . . . . 
Using Map/GPS Compatible i-Îąppli . . . . . . . . . . . . . . . . . . . . . .
Providing Location Information on Request
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 
Notifying Location Information. . . . . . . . .
Displaying History of Checked Location Information
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 
Setting GPS . . . . . . . . . . . . . . . . . . . . . . . . . . . .
328
328
329
330
331
332
332
327
Using GPS Function
GPS is operated by the United States Department of Defense, so the GPS radio wave
conditions might be controlled (accuracy deterioration, radio wave supply suspension,
etc.) depending on the defense strategy of the United States Department of Defense.
Note that we do not take any responsibility for a loss such as pure economic loss
resulting from the facts that you have missed the chance to check the measurement
(communication) results, which have been caused by external factors such as
malfunctions, erroneous operations, troubles, or power failure (including battery
shortage) on the FOMA terminal.
You cannot use the FOMA terminal as a navigating system for aircraft, vehicles, and
people. Therefore, note that we are not held responsible for any damage resulting from
the use of the location information for navigation.
You cannot use GPS as a high-accuracy measuring device. Note that we do not take
any responsibility for the damage caused by an error in the location information.
You cannot use the GPS function when the FOMA terminal is out of the service area
(or overseas).

Checking Your Location
You can measure your current location and display it.
You can display a map and send your location information by mail as well.
mLifeKitMap/GPSPosition location
Blinks during measuring
Map/GPS Function
Information
You cannot use the GPS function in the following cases:
ポDuring Self Mode
・During Omakase Lock※
・During Lock All※
ポWhile the UIM is not inserted
※Provide Location is available.
As GPS uses radio waves transmitted from the satellites, note that you cannot or
might have difficulty to receive radio waves in the following conditions:
ポIn a building or right under it
ポIn the basement, tunnel, ground, water
ポIn a bag or case
ポIn densely crowded areas with buildings and houses
ポIn densely crowded trees and right under them
ポClose to high-tension wires
ポIn a car or train
ポIn bad weather such as heavy rain and snow
ポWhen there are obstacles (persons and articles) around the FOMA terminal.
ポWhen you cover the displays, keys, microphone, or speakers of the FOMA terminal
with your hand.
In these cases, an error in the obtained location information might become
300 meters or more.
Before you use Provide Location or Notify of Location, refer to the notice by GPS
service providers or on the DOCOMO website. Further, you might be charged a fee
for using these functions.
328
The current location is displayed by the latitude and longitude.
…Measurement date …Latitude …Longitude
…Geographic datum
…Accuracy
★★★: Almost accurate location information (Error is about less than
50 meters)
★★☆: Relatively accurate location information (Error is less than about
300 meters)
★☆☆: Approximate location information (Error is about 300 meters or more)
The accuracy is an estimate. It might differ from actual one depending on the radio
wave conditions in the surrounding area.
Press l(
) to measure again in “Quality mode” (see “Positioning mode”
on page 333).
When “
” is displayed at bottom right of the display during measuring,
press i and select “OK” to display the location using the information during
measuring.
You can measure your location also by pressing and holding 1 for at least one
second from the vertical Stand-by display. After measuring, the “Function Menu
while Current Location is Displayed” on page 329 is performed following the
setting of “GPS button setting” on page 333.
Function Menu while Current Location is Displayed
Read map
You can display a map by starting GPS compatible i-Îąppli
program set by “Select map”.
Map/GPS Îąppli
You can use the location information on a GPS compatible i-Îąppli
program.
Select an i-Îąppli program.
Paste to mail
You can compose an i-mode mail message with the URL of the
location information pasted to the text.
YES
Go to step 2 on page 146.
The URL of the location information to be sent is displayed on
i-mode compatible phones only.
Add to phonebook You can store the location information in the Phonebook.
YES
Go to step 2 on page 94.
Attach to image
You can store the location information in the image.
Select a folderSelect an imagel(
YES or NO
YES . . . . Overwrites and saves.
NO . . . . . Saves as a separate file.
Start GPS Compatible i-Îąppli
You can select an i-Îąppli program from the GPS compatible i-Îąppli list to
start it.
mLifeKitMap/GPSMap/GPS Îąppli
Select an i-Îąppli program.
See page 291 for the Software list.
Information
When you use a GPS compatible i-Îąppli program, the location information is sent to
the information provider of the i-Îąppli program you use.
You need to set “Location usage” of “Software setting” to “ON” when you use the GPS
function of a GPS compatible i-Îąppli program.
Using “地図アプリ (Map Application)”
“地図アプリ (Map Application)” is a useful i-αppli program that enables
you to show the map of your current or specified location, check area
information, or navigate yourself to the destination by using location
information. You can search for information of useful facilities in a time of
disaster. Further, using Chizu Talk function, you can exchange
messages with your friends on the map.
Using Map/GPS Compatible i-Îąppli
Map/GPS Function
Display a Map
You can start GPS compatible i-αppli program set by “Select map”.
At purchase, “地図アプリ (Map Application)” is set and you can read a
map of current or specified location.
mLifeKitMap/GPSMap
When “Select map” is not set, select a GPS compatible i-αppli program you use
for displaying a map.
Š 2009 ZENRIN DataCom CO., LTD.
329
■About Service Charge
The services provided by this application are classified as follows:
Charge-free functions
Map viewing and area information search are available. Gourmet-coupon search is
also available.
On the map, you can color the places for which you previously measured by using
GPS, by the unit of city, ward, town, village, or prefecture. This function shows the
visited places at a glance.
In addition to the ordinary map, you can change the mode to show the various types of
maps such as the 3D map, train-route accentuated map, and day/night mode map, etc.
Charged functions
You can use these functions charge free except traffic information for up to 60 days from
when you start Map Application for the first time. After this charge-free period, you need
to register yourself to My Menu at “ゼンリン
地図＋ナビ (ZENRIN
map+navi)”
(charged) provided by ZENRIN DataCom CO., LTD.
You can navigate yourself to the destination by the comprehensive search including
cars, trains, and on foot. Root search considering traffic snarls is also available.
You can show the train transfer information and timetables.
You can show the locations of your friends on the map and exchange messages with
them.
You can search for facilities which are useful in a time of disaster. You can also use the
disaster map application, the i-Îąppli program which does not require communications.
If you previously download the disaster map of your neighborhood, you will be helped
in case of emergency.
Map/GPS Function
Information
You are separately charged a packet communication fee. You are advised to
subscribe to Pake-hodai, Pake-hodai full or Pake-hodai double for using this software
program.
If you delete this software program, download it from “ｉエリア−周辺情報− (i-area
-Area Information-)”.
Note that we are not held responsible for the accuracy and promptness of the map
and route information.
While driving, ensure that a person other than the driver operates this software
program.
This software program supports motion tracking.
The displays are for reference, so the actual ones might differ.
330

Providing Location Information on Request
You can provide your location information on the request from others.
Depending on the service you use, you need to set GPS service settings
beforehand. (See page 333) Also, you need to set “Location request set.”
to the setting to permit the location provision beforehand.

When a location provision request
arrivesYES or NO
YES . . . . Measures the current location and sends the
location information.
NO . . . . . Rejects to provide the location information.
If no keys are pressed for about 20 seconds, the former
display returns without providing your current location.

When a location provision request
arrivesOK
When you select “OK” or about three seconds elapse,
the current location provision starts.
The information about where to provide might not be
displayed.
Press r to stop providing information. However, your
location information might be sent depending on the
timing.
Information
If no keys are pressed for about 15 seconds from the Position Location Result display
or the Failure display, the former display returns.
To use “imadoco search”, you need to trace from iMenu → “お客様サポート (User
Support)” → “各種設定（確認・変更・利用）[Respective settings (Confirmation/
Change/Use)]” → “その他サービス設定・確認 (Other Service Settings/
Confirmation)” → to set “位置情報利用設定（イマドコサーチ設定）[Location
Information Usage Setting (imadoco search Setting)]”.
When “Location request set.” is set to other than “OFF”, your location information might
be sent and known to the searchers, even if you do not operate the FOMA terminal.
Information

Notifying Location Information
You can notify a service provider of your current location.
mLifeKitMap/GPSNotify of location
Direct inputEnter a party to be notifiedYES
You can enter up to 12
digits by using numerals, #
and :.
If you have stored LCS
clients by “Reg. LCS client”
beforehand, you can select
an LCS client from “View
service clients”.
You can press
l(
) to stop
measuring, but your current
location might be notified
depending on the timing.
OK
Information
Even when you send your location information, it might not be delivered to the service
provider depending on the radio wave conditions.
You are charged a fee for using the function to notify your current location.
To use Notify of Location, you might need to subscribe to a service provider that
supports Notify of Location. Further, you might be charged a fee for using the service.
You cannot enter any digits during Keypad Dial Lock.
Regardless of the mode of 2in1, your location information is notified by Number A.
331
Map/GPS Function
Even when you send your location information, it might not be delivered to the service
provider depending on the radio wave conditions.
In the following cases, the display of location provision request is not shown but the
request is rejected:
・When “Location request set.” is set to “OFF”.
ポWhen you receive a location provision request from a party not stored in the
Phonebook while “Location request set.” is set to “Reject numbers unset”.
ポWhen you receive a location provision request outside the validity period set by
“Location request set.”.
When you set, by GPS service settings, the location provision request to be checked
every time, the location information is not provided on the location provision request
during Public mode (Drive mode).
When you set, by GPS service settings, the location provision request to be accepted,
the location information is provided with a display during Public mode (Drive mode)
but the positioning ring tone, vibrator, and illumination do not work.
When you are requested to provide your location information from the party using
“imadoco kantan search”, the confirmation display appears asking whether to send
the current location information each time you receive a request. Select “YES” to
immediately send the rough position location result. After selecting “YES”, the GPS
Measuring display appears and the precise position location result is notified after
GPS measuring. The rough position location result is notified even if you suspend the
location provision during GPS measuring. In this case, it is recorded in Location
History but the location information is not displayed.
Regardless of the mode of 2in1, the location information can be searched for Number
A only.
When the other party searches you by your Number B, your current location is not
provided and the searcher is notified that the search has failed.
A fee is not charged for using the Provide Location function.
For using the service, refer to the information on your service provider or the
DOCOMO website.

Add to phonebook
You can store the location information, phone number, or mail
address in the Phonebook.
Store loc. info., Store phone number, or Store mail
addressYES
Go to step 2 on page 94.
Attach to image
See page 329.
Compose message
You can compose an i-mode mail message to your location
provision requester.
Go to step 3 on page 146.
Dialing
See page 247.
Displaying History of Checked Location
Information
Up to 50 histories of Position Location, Notify of Location, and Provide
Location are stored.
mLifeKitMap/GPS
Location history
Select a location history.
“
: Position location
: Provide location
: Notify of location
” is displayed for the records of successful positioning.
Map/GPS Function
Information
When the location histories exceed 50, they are automatically overwritten from the
oldest one.
The location information and accuracy stored in Location History may differ from the
ones sent to the location provision requester or LCS client depending on the radio
wave conditions, and others.
When you cancel Position Location midway, fail to measure your location, or reject a
location provision request by the setting of “Location request set.”, the history is not
recorded.
Even when the histories of Provide Location or Notify of Location are stored, they
might not have been delivered to your service providers.
You cannot use the measuring-failed histories of Provide Location or Notify of
Location for the operations other than “Add to phonebook (except “Store loc. info.”)”,
“Compose message”, “Dialing”, and “Delete”.
When Provide Location was used, the name of the location provision requester is checked
against the Phonebook entries which appear in each mode of 2in1 and then shown.
If the phone number of the location provision requester is the one you added in your
“Own number”, the name of the location provision requester is not displayed on
Location History.
Function Menu while Location History is Displayed
Read map
See page 329.
Map/GPS Îąppli
See page 329.
Paste to mail
See page 329.
332
Delete
Delete this
YES
Delete all
Enter your Terminal Security CodeYES

Setting GPS
mLifeKitMap/GPSGPS settings
Do the following operations.
Map setting
Select map
You can select a GPS compatible i-Îąppli program to use when
displaying a map from “Map” or location information.
Select an i-Îąppli program.
See page 209 when you select “Search by i-mode”.
Map activate setting You can set whether to start the GPS compatible i-Îąppli
program after measuring your current location when
displaying a map.
Start after locating or Start without locating
GPS button setting
You can set a function which is performed after measuring
your location by pressing and holding 1 for at least one
second from the vertical Stand-by display. You can select a
function from the “Function Menu while Current Location is
Displayed” on page 329.
Select a function.
If you set to “Confirm every session”, you can select a
function each time you measure the location.
Posit. tone/illum.
See page 333.
Positioning mode
You can select a mode for measuring the current location from
either “Standard mode” or “Quality mode”.
When you select “Quality mode”, it takes a longer time to
measure, but the measuring accuracy might be improved as a
result.
You can set a positioning mode for Position Location, Notify of
Location, and Provide Location respectively.
Select an operation to be set
Standard mode or Quality mode
See page 334.
Location request set.
See page 334.
Service settings
By accessing GPS service settings (a host set by “Host
selection”), you can configure the settings for the Provide
Location service such as the password and search permission
for location information.
See page 197 for operations while a site is displayed.
However, you cannot use the Bookmark or Screen Memo
function.
When you access from overseas, the error display appears
and you cannot use this function. However, you are charged
a packet communication fee.
Host selection
mLifeKitMap/GPSGPS settings
Posit. tone/illum.Select an operation to be set
Do the following operations.
Select posit. ring
tone
Select a folderSelect a ring tone.
While selecting a ring tone, you can check the selected tone.
Ring time setting
You can set a ring time for positioning ring tone.
Enter a ring time (seconds).
Enter two digits from “00” through “30”. For “Location req./
Confirm”, however, enter two digits from “00” through “20”.
If you set to 0 seconds, the tone does not sound.
Select vibrator
Select a vibration pattern.
If you select “Melody linkage”, the FOMA terminal vibrates in
time with ring tone.
While selecting a vibration pattern, you can check the selected
vibration.
Select illumination Select an item.
While selecting an item, you can check the lighting/flickering of
the Call/Charging indicator.
Map/GPS Function
Reg. LCS client
Positioning Tone/Illumination
You can select a tone to sound for when you check your current location
or when you are requested to provide location information. You can set a
color of the Call/Charging indicator and the vibration pattern as well.
See page 336.
333
Information
Register LCS Client
If you have stored LCS clients, you can select an LCS client when you
notify of your current location. Further, you can automatically notify of
your current location when you make a call to the stored phone number.
You can store up to five LCS clients.
mLifeKitMap/GPSGPS settings
Reg. LCS clientHighlight  and press
l(
) or Oo(
Do the following operations.
Even if “Notify when dialing” is set to “ON” or to “Confirm every dial”, you cannot notify
of your current location when you make a call without notifying of your caller ID.
Function Menu while LCS Client is Displayed
Delete
Delete this
YES
Delete all
Enter your Terminal Security CodeYES
Add to phonebook
You can store the service client name and phone number
stored in “Reg. LCS client” into the Phonebook. (See
page 329)
Edit
Go to step 1 of “Register LCS Client” on page 334.
You can edit also by pressing l(
).
Send Ir data
See page 383.
If you select a stored LCS client, you can confirm the stored contents.
Service client name Enter a service client name.
You can enter up to 16 full-pitch/32 half-pitch characters.
Service client ID
Map/GPS Function
Phone number
Enter a service client ID.
You can enter up to 12 digits by using numerals, # and :.
Enter the service client ID specified by your service provider.
Enter a phone number.
You can enter up to 26 digits.
Highlight the phone number field, press i(
), and
select “Enter from PB” to call up a phone number from the
Phonebook and enter it.
If you enter a phone number by “Enter from PB” with “Service
client name” not entered, the name for the Phonebook entry is
entered.
Notify when dialing You can set whether to notify of your current location for when
you make a voice call or videophone call to the stored phone
number.
ON, OFF or Confirm every dial
To check each time you make a call, select “Confirm every dial”.
Press l(
334
).
Send all Ir data
transmission
All
transmission
See page 384.
See page 385.
See page 385.
Location Request Set.
You can set how to operate when you receive a location provision
request. You can set a validity period when you set to permit the location
provision.
mLifeKitMap/GPSGPS settings
Location request set.
Enter your Terminal Security CodeSelect an item.
ON . . . . . . . . . . . . . . . . . . . .Permits the location provision request by all searchers
and notifies the current location.
OFF . . . . . . . . . . . . . . . . . . .Rejects the location provision request.
Reject numbers unset . . .Permits the location provision request only by the
parties stored in the Phonebook. Requests from the
parties not stored in the Phonebook are automatically
rejected.
2
Select “YES” to set a validity period
Do the following operations.
■Operations when the validity period for location provision is specified
Example: When the current date and time are 12:00/18/Nov and you set 14:00 as the
start time and 21:00 as the end time
Permit from
Enter the time for starting permission.
Permit to
Enter the time for ending permission.
1 time
Repeat
Select a repeat type.
When you select “Select day”, put a check mark for days of the
week to be repeated, then press l(
).
Daily
Validity period
When you set to “Repeat”, you can set the period to be valid.
ON or OFFEnter a validity date (from)
ON or OFFEnter a validity date (to).
Press l(
Repeat
Select day
).
Information
You can set “Location request setting” also by “Initial setting” (see page 46).
When a location provision request is rejected by the setting of “Location request set.”,
the history is not recorded.
You can specify from January 1, 2009 through December 31, 2037 for “Permission
schedule”.
When “Reject numbers unset” is set, the location provision requests from all the
parties stored in the Phonebook are permitted regardless of the mode of 2in1.
Even if you set to “Reject numbers unset”, you might receive a location provision
request from the party not stored in the Phonebook depending on the function in use.
Validity period
—
Period of location provision
14:00/18/Nov through 21:00/18/Nov
Start date: 20/Nov
End date: 30/Nov
Every day 14:00 through 21:00 from 20/Nov through
30/Nov
Start date: 10/Nov
End date: 30/Nov
Every day 14:00 through 21:00 from 18/Nov through
30/Nov
OFF
Every day 14:00 through 21:00 on and after 18/Nov
Start date: 20/Nov
End date: 30/Nov
14:00 through 21:00 of the specified days of the
week from 20/Nov through 30/Nov
Start date: 10/Nov
End date: 30/Nov
14:00 through 21:00 of the specified days of the
week from 18/Nov through 30/Nov
OFF
14:00 through 21:00 of the specified days of the
week on and after 18/Nov
Example: When the current date and time are 12:00/18/Nov and you set 10:00 as the
start time and 21:00 as the end time
Repeat
Validity period
1 time
Daily
Period of location provision
12:00/18/Nov through 21:00/18/Nov
Start date: 20/Nov
End date: 30/Nov
Every day 10:00 through 21:00 from 20/Nov through
30/Nov
Start date: 10/Nov
End date: 30/Nov
12:00/18/Nov through 21:00/18/Nov, every day
10:00 through 21:00 from 19/Nov through 30/Nov
OFF
12:00/18/Nov through 21:00/18/Nov, every day
10:00 through 21:00 on and after 19/Nov
Start date: 20/Nov
End date: 30/Nov
10:00 through 21:00 of the specified days of the
week from 20/Nov through 30/Nov
Start date: 10/Nov
End date: 30/Nov
If 18/Nov is the specified day;
12:00/18/Nov through 21:00/18/Nov, 10:00 through
21:00 of the specified days of the week from 19/Nov
through 30/Nov
OFF
If 18/Nov is the specified day;
12:00/18/Nov through 21:00/18/Nov, 10:00 through
21:00 of the specified days of the week on and after
19/Nov
335
Map/GPS Function
Select day
—
Example: When the current date and time are 12:00/18/Nov and you set 14:00 as the
start time and 10:00 as the end time
Repeat
Validity period
Select day
You can use this setting for changing the host for Service Settings.
Start date: 20/Nov
End date: 30/Nov
14:00 through 10:00 of the next day from 20/Nov
through 30/Nov
Start date: 10/Nov
End date: 30/Nov
14:00 through 10:00 of the next day from 18/Nov
through 30/Nov
OFF
14:00 through 10:00 of the next day on and after
18/Nov
Start date: 20/Nov
End date: 30/Nov
14:00 through 10:00 of the next days of the specified
days of the week from 20/Nov through 30/Nov
Start date: 10/Nov
End date: 30/Nov
14:00 through 10:00 of the next days of the specified
days of the week from 18/Nov through 30/Nov
OFF
14:00 through 10:00 of the next days of the specified
days of the week on and after 18/Nov
—
Example: When the current date and time are 12:00/18/Nov and you set 10:00 as the
start time and 10:00 as the end time
Repeat
Validity period
1 time
Map/GPS Function
Daily
Select day
336
※Normally, you do not need to change this setting.
14:00/18/Nov through 10:00/19/Nov
1 time
Daily
Period of location provision
Host Selection
—
Period of location provision
12:00/18/Nov through 10:00/19/Nov
Start date: 20/Nov
End date: 30/Nov
10:00/20/Nov through 10:00/1/Dec
Start date: 10/Nov
End date: 30/Nov
12:00/18/Nov through 10:00/1/Dec
OFF
12:00/18/Nov through 10:00/19/Nov, every day
10:00 through 10:00 of the next day on and after
19/Nov
Start date: 20/Nov
End date: 30/Nov
10:00 through 10:00 of the next days of the specified
days of the week from 20/Nov through 30/Nov
Start date: 10/Nov
End date: 30/Nov
If 18/Nov is the specified day;
12:00/18/Nov through 10:00/19/Nov, 10:00 through
10:00 of the next days of the specified days of the
week from 19/Nov through 30/Nov
OFF
If 18/Nov is the specified day;
12:00/18/Nov through 10:00/19/Nov, 10:00 through
10:00 of the next day of the specified days of the
week on and after 19/Nov
mLifeKitMap/GPSGPS settingsHost selection
Highlight  and press l(
).
If you select a stored host, the setting is changed to that host.
To delete a stored host, press i(
), select “Delete” and select “YES”.
Do the following operations.
Host name
Enter a host name.
You can enter up to 9 full-pitch/18 half-pitch characters.
Host number
Enter a host number.
You can enter up to 99 half-pitch alphanumeric characters.
Host address
Enter a URL.
You can enter up to 100 half-pitch alphanumeric characters.
Press l(
).
Data Management
Data Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 338
Making Full Use of Still Images
Displaying Images . . . . . . . . . . . . . . . . . . . . .  340
Editing Still Images. . . . . . . . . . . . . . . . . . . . . . . . 345
Creating Animations. . . . . . . . . . . . . . . .  347
Making Full Use of Moving Pictures
Playing i-motion/Movie. . . .   348
Using Playlist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 354
Editing i-motion . . . . . . . . . . . . . . . . . . . . . . . . 354
Making Full Use of Video
Playing Video . . . . . . . . . . . . . . . . . . . . . . . . . . .