Download: Mirror Download [FCC.gov] Document ID 1099908 Application ID l9V/qM4y5BGPkiu5seH7yw== Document Description User Manual Part 1 of 2 Short Term Confidential No Permanent Confidential No Supercede No Document Type User Manual Display Format Adobe Acrobat PDF - pdf Filesize 361.84kB (4523032 bits) Date Submitted 2009-04-22 00:00:00 Date Available 2009-06-26 00:00:00 Creation Date 2009-04-21 15:30:00 Producing Software GPL Ghostscript 8.54 Document Lastmod 2009-04-21 15:30:00 Document Title User Manual Part 1 of 2 Document Creator PDFCreator Version 0.9.3 Document Author: jzb
P-08A
ISSUE DATE:
‘09.6
Easy Search/Contents/Precautions
Before Using the Handset
Voice/Videophone Calls/PushTalk
Phonebook
Sound/Screen/Light Settings
NAME:
Security Settings
Mail
PHONE NUMBER:
i-mode/Full Browser
i-motion/Movie/i-Channel/i-concier
MAIL ADDRESS:
Camera
1Seg
INSTRUCTION MANUAL
Music
i-αppli/i-Widget
Osaifu-Keitai/ToruCa
Map/GPS Function
Data Management
Convenient Functions
Character Entry
Network Services
Overseas Use
PC Connection
Appendix/Troubleshooting
Index/Quick Manual
DOCOMO W-CDMA・GSM/GPRS System
Thank you for selecting the “docomo STYLE series P-08A”.
Before or during use of the P-08A, make sure that you read this manual and the
separate manuals for other optional devices thoroughly so that you can use the
P-08A correctly.
If you feel any inconvenience in reading the manual, contact the docomo
Information Center listed on the back page of this manual.
The P-08A is designed to be your close partner. Treat it carefully at all times to
ensure long-term performance.
●It is recommended that you make separate notes of the information (such as
Phonebook entries, schedule events, text memos, record messages, voice
memos, movie memos) stored in the FOMA terminal and keep them in a safe
place. Note that we cannot be held responsible for the unlikely event of loss of
the stored contents due to a malfunction, repair, change of your model, or
other mishandling of the FOMA terminal.
●You are advised to save your important data files to the microSD card. If you
have a personal computer, you can transfer and save the information such as
Phonebook entries, mail messages, schedule events, and others to the
personal computer by using DOCOMO keitai datalink.
Before using your FOMA terminal
●Because the FOMA terminals use radio waves, they cannot be used in places
where radio waves do not reach, such as inside tunnels, underground, or in
buildings; or the outside where radio waves are weak or out of the FOMA
service area. They may not be used in the high-rise buildings even when the
antennas are unobstructed. You may also experience interruption of calls
even when using without moving while the radio waves are strong enough for
the three antennas to appear on the display.
●Use the FOMA terminal carefully to avoid disturbing other people when in
public, or in crowded or quiet places.
●Since the FOMA terminals use radio waves as the medium of
telecommunication, calls may be tapped by the third party.
However, the W-CDMA・GSM/GPRS system automatically supports tapping
prevention, so your conversation will be incomprehensible to the third party,
because it is recognized as mere noise.
●The FOMA terminals change your voice into digital signals and send them to
the other party. In places where the radio waves are weak, the digital signals
may not be converted correctly, and in such a case, the voice may sound
different from the actual original voice.
●The user hereby agrees that the user shall be solely responsible for the result of
the use of SSL/TLS. Neither DOCOMO nor the certifiers as listed herein make any
representation and warranty as for the security in the use of SSL/TLS. In the event
that the user shall sustain damage or loss due to the use of SSL/TLS, neither
DOCOMO nor the certifiers shall be responsible for any such damage or loss.
Certifiers: VeriSign Japan K.K., Cybertrust Japan Co., Ltd., GlobalSign K.K.,
RSA Security Japan Ltd., SECOM Trust Systems Co., Ltd., and
Comodo CA Ltd.
●This FOMA terminal supports FOMA Plus-Area and FOMA High-Speed Area.
●The FOMA terminal can be used only via the FOMA network provided by
DOCOMO and in DOCOMO’s roaming area.
For Using This Manual
This FOMA terminal supports Kisekae Tool (page 114).
If you use Kisekae Tool to change the design of the Menu display,
some menu configurations change according to the usage
frequency depending on the type of the menu. Further, some menu
numbers that are assigned to the menu items do not apply.
You can download the latest information about this manual
from the following DOCOMO website:
・User’s Manual (PDF file) Download
(http://www.nttdocomo.co.jp/english/support/manual/index.html)
※The URL and the content of the website might be modified
without notice.
Easy Search/Contents/Precautions
Viewing/Searching This Manual
The most operating procedures and displays in this manual are described with the
default settings of the “Mat Black” (see page 466) handset. However, the following
settings are changed.
・“Display setting” → “Stand-by display”: OFF
・“Display setting” → “Clock” → “Stand-by clock” → “Position”: Pattern 1
・“Color theme setting”: White
・“Menu icon setting”: Normal
・“Disp. call/receive No.” → “Font color”: Black
Displays and illustrations described in this manual are for reference. The actual ones
might differ.
In this manual, “Osaifu-Keitai compatible i-αppli which supports the IC card function” is
described as “Osaifu-Keitai compatible i-αppli”.
Note that “P-08A” is referred to as “FOMA terminal” in this manual.
In the operating procedures of this manual, key operations are described with
simplified key icons.
The functions which use a microSD card are described in this manual; however, you
need to obtain a microSD card separately to make these functions available. See
page 360 for the microSD card.
From the Index
Search from the index when you know the names of functions or services.
From Easy Search
Search from keywords for the functions you frequently use or the functions that are
convenient if you can know any.
From the Tabs on the Cover
Search from the tabs printed on the cover.
See the next page for details.
From the Contents
!!P.6
Search from the contents that categorize functions.
From the Main Functions !!P.8
Search from here to use the main functions.
From the Function List
!!P.466
Search from the function list.
From Quick Manual
!!P.550
Quick Manual gives you a clear, brief description about basic functions. You can take it
when you go out. Further, Quick Manual “For Overseas Use” is attached, so refer to it
when you use the FOMA terminal overseas.
It is prohibited to copy all or part of this manual without permission.
The instructions contained in this manual may be changed without notice.
Easy Search/Contents/Precautions
In this manual, illustrations and symbols are used in the explanations so
that you can correctly and easily use the FOMA terminal.
How to Refer to This Manual
By the following search methods, you can find pages where your desired
functions and services are described:
Easy Search/Contents/Precautions
How to search for “Alarm” is explained here as an example of search method.
From the Index
Additional guidance . . . . . . . . . . 450
Address link function . . . . . . . . . . . 210
After-sales services . . . . . . . . . . . . 515
Alarm . . . . . . . . . . . . . . . . . . . . . . . 396
Alarm setting . . . . . . . . . . . . . . . . . 405
Answer setting . . . . . . . . . . . . . . . . . 66
Antenna . . . . . . . . . . . . . . . . . . . . . . 23
!!P.540
Search for a function or a service
name as shown on the right.
Other things you can do
From Easy Search
To reduce the battery consumption .............................. 114
!!P.4
To scan QR codes or bar codes ...................................... 243
To listen to music.................................................................. 276
To check your location and area information................. 324
To use the microSD card ...................................................... 362
To exchange information using infrared rays......... 376
Search for the function you
frequently use or that is
convenient if you know any as
shown on the right.
To use the FOMA terminal as an alarm clock..................................... 396
To use the FOMA terminal as a calculator .................................. 410
To use the FOMA terminal overseas ........................ 452
To update software programs........................................... 517
From the Tabs on the
Cover
Osaifu-Keitai/ToruCa
!!Cover page
Convenient Functions
Music
i-αppli/i-Widget
Map/GPS Function
Search for the function you want
to set in the order of “Cover”
→ “First page of Chapter”
→ “Description page” as shown
on the right.
Data Management
Character Entry
Network Services
Overseas Use
PC Connection
Appendix/Troubleshooting
Multitask . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Informing You of an Incoming Call/Mail Message by Voice
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Turning Power On/Off Automatically at a Specified Time
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using Alarm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using Calendar to Manage Schedule . . . . . . . . . . .
Using ToDo to Manage Schedule . . . . . . . . . . . . . . . . .
Setting Operating Conditions of Alarm . . . . .
393
394
396
396
399
403
405
Go to page 394
where “Alarm”
is explained.
Menu number
(See page 34)
+m-4-4
Using Alarm
You can set Alarm to alert you at the specified time with an alarm tone,
animation and illumination. You can store up to 12 alarms.
Operating
procedure
(See page 32)
mStationeryAlarmHighlight an
alarm and press l(
Do the following operations.
Reference display
(Characters and settings
Alarm
are for reference.)
Chapter title
You can
search by
chapter.
Convenient Functions
Time
Options and their
explanations
You can set whether to validate or invalidate the alarm.
ON or OFF
Enter the time for sounding the alarm.
pYou cannot set the same time as the time set for the stored
alarm.
Select a type of alarm toneSelect a folder
Select an alarm tone.
Volume
Use Bo to adjust the volume.
pIf you set “Step”, the alarm tone is silent for about three
seconds, and then the volume steps up every about three
seconds, from Level 1 through Level 6.
Press l(
Function Menu while Alarm is Displayed
Edit
Go to step 1 of “Using Alarm” on page 396.
Detail
You can display the stored alarm contents.
Set this
You can validate the stored alarm.
YES
pYou can validate also by pressing Oo(
Set all
You can validate all the stored alarm.
YES
).
Delete
Tone
Prefer manner
mode
Items shown on the
display
(Some items cannot
be executed.)
You can set the alarm tone which sounds at the specified time
during Manner Mode.
ON or OFF
ON. . . . . Sounds at the same volume as set for “Alarm volume”.
OFF. . . . Sounds at the volume set for this function.
Delete this
YES
Delete all
Enter you Terminal Security CodeYES
Information
pIf the alarm tone sounds during a call, press any key to stop it. Once again press any
key to end the alarm including Snooze. If the other party on the phone hangs up, an
alarm including Snooze ends.
pDuring a call, the alarm tone sounds at the level set for “Volume” (earpiece volume).
pTurn off the FOMA terminal after setting “Auto power ON” to “OFF” when you are near
electronic devices using high-precision control or weak signals, or where the use is
prohibited such as in airplanes and hospitals.
When you set an alarm for “Alarm”, “Schedule”, and “ToDo”
The icon appears on the Stand-by display.
“
” . . . Displayed when an alarm is set for today (except the setting for past time).
“
” . . . Displayed when an alarm is set for tomorrow or onward only.
pIf you set “Alarm” of a schedule event/ToDo item to “OFF”, the icon is not displayed.
Operation and
supplementary
explanation for each
item
Lower sub-menu item
of the Function menu
Cautions or
references for using
each function
Operations related to
the function and
explanations for
supplementary
operations
).
396
Note: The page above is a sample.
Easy Search/Contents/Precautions
Function name
You can find this in
Index.
Easy Search/Contents/Precautions
Easy Search
To retrieve a desired function with simple words, refer to the following:
To know convenient functions for making calls
To change/know display settings
To/Not to notify your phone number to the other party
....................................................................................
To know the meaning of marks (icons) on the display .....................
46
To switch to a videophone call during a voice call
27
To change the Stand-by display (Wallpaper) ...................... 109
To display a calendar on the Stand-by display .............................. 109
...........................................................................
51
To change the menu display .......................................... 114
To change a volume level of the other party’s voice .......................
66
To change the font size .................................................... 118
To put a call on hold during a call....................................................
67
To make full use of mail
To do the following when you cannot answer calls
To send Deco-mail ...................................................................... 145
To put an incoming call on hold before answering .........................
67
To send images ....................................................................... 152
To sort and save mail automatically .............................................. 171
To convey the message that you need to refrain from talking on the phone
..................................................................... Using Public Mode (Drive Mode)
68
....................................................................... Using Public Mode (Power Off)
68
To record voice/video messages..........................
69
To make full use of camera
To shoot with the flash/photo light ........... 236
To change melody or illumination
To change the shooting size...................................................... 237
To save to the microSD card ........................................................... 238
To adjust the ring volume ........................................................
66
To change ring tones according to callers......................
88
To change ring tones........................................................ 102
To know incoming calls by vibrator ................................................. 104
To mute the keypad sound................................................... 105
To activate Manner Mode...................................................... 106
To change colors/lighting patterns of Call indicator for incoming calls
.................................................................................................. 115
To display shot images......................................................... 334
Other things you can do
To lock the FOMA terminal from away when it gets lost
To reduce the battery consumption .............................. 112
......................................................................................... ※1 125
To scan QR codes or bar codes ...................................... 241
To keep Phonebook entries from prying eyes ......................... 133
To listen to music .................................................................. 274
To reject calls without a caller ID .............................. 135
To check your location and area information................. 322
To reject calls from the phone numbers that are not
To use the microSD card ...................................................... 360
in the Phonebook ............................................................ 136
To separately store Phonebook and other data
files in preparation for their erasure.................... ※2 137
※1 This is a pay service.
※2 This is a pay service which is available on a subscription basis.
To make full use of 1Seg
To exchange information using infrared rays......... 374
To use the FOMA terminal as an alarm clock..................................... 394
To use the FOMA terminal as a calculator .................................. 408
To use the FOMA terminal overseas ........................ 450
To update software programs........................................... 515
To update security ......................................................... 520
The operating procedures for frequently used functions are summarized in Quick
Manual. (See page 550)
To watch 1Seg programs ...................................................... 249
To record 1Seg programs.................. 256
To set TV Timer/Timer Recording for 1Seg programs
....................................................................... 257
To change settings of video and audio ................................... 262
Easy Search/Contents/Precautions
To use the FOMA terminal with a sense of security
Easy Search/Contents/Precautions
Contents
Viewing/Searching This Manual . . . . .1
Precautions. . . . . . . . . . . . . . . . . . . . . 10
Easy Search . . . . . . . . . . . . . . . . . . . . . .4
Handling Precautions . . . . . . . . . . . . 16
Contents . . . . . . . . . . . . . . . . . . . . . . . . .6
Standard Accessory Kit and Main
Main Functions of P-08A. . . . . . . . . . . .8
Options . . . . . . . . . . . . . . . . . . . . . . . . 20
Before Using the
Handset
21
Voice/
Videophone Calls/
PushTalk
47
Phonebook
87
Sound/Screen/
Light Settings
101
Security Settings
121
Part Names and Functions, Display, Desktop Icon,
Selecting Menu, Guide, UIM (FOMA Card), Battery,
Charging, Power ON/OFF, Select Language,
Set Time, World Time Watch, Caller ID Notification,
Own Number, etc.
Making a Call/Videophone Call, Call Records,
Chaku-moji, Receiving a Call/Videophone Call, Volume,
Ring Volume, Public Mode, Record Message Setting,
Chara-den, Making a PushTalk Call,
Receiving a PushTalk Call, PushTalk Phonebook, etc.
Available Phonebooks,
Add to Phonebook (FOMA terminal/UIM),
Group Setting, Search Phonebook, Edit Phonebook,
Delete Data, No. of Phonebook, 2-touch Dial,
Voice Dial
Select Ring Tone, Vibrator, Speed Selector Sound,
Manner Mode, Display Setting, Backlight,
Menu Icon Setting, Kisekae Tool, Set to Machi-chara,
Illumination, Font, etc.
Security Codes, Change Security Code,
Releasing PIN Lock, Lock All, Omakase Lock,
Self Mode, Personal Data Lock, Keypad Dial Lock,
Secret Mode, Call Setting without ID, Reject Unknown,
Reset Settings, Initialize, etc.
Mail
141
i-mode/
Full Browser
189
i-motion/Movie/
i-Channel/i-concier
i-mode Mail, Deco-mail, Decome-Anime, Template,
Attachments, Mail Auto-receive, Receive Option,
Check New Messages, Message R/F,
Early Warning “Area Mail”, Chat Mail, SMS, etc.
i-mode, iMenu, My Menu, Change i-mode Password,
Full Browser, Last URL, Enter URL, Bookmark,
Screen Memo, Download, Upload, i-mode Settings,
Certificate, etc.
i-motion/Movie, Download i-motion/Movie,
Movie Auto Play Setting, i-Channel, i-concier
217
Camera
225
1Seg
245
Music
265
Before Using Camera, Still Image Shoot,
Moving Picture Shoot, Settings for Shooting,
Setting Image Size/Image Quality, Bar Code Reader
1Seg, Before Using 1Seg, Channel Setting,
Activate 1Seg, i-αppli Program Guide,
Data Broadcasting, TVlink, Recording 1Seg,
TV Timer/Timer Recording, User Settings
Music&Video Channel, Set Program,
Playing/Operating Programs, Playing Music,
Saving Music Files, MUSIC Player, Playlist
285
Osaifu-Keitai/
ToruCa
309
Map/GPS Function
321
Data Management
331
Convenient
Functions
389
Character Entry
421
Osaifu-Keitai, iC Transfer Service, IC Card Content,
IC Card Lock, Check IC Owner, ToruCa,
Receive ToruCa Files, ToruCa Viewer,
ToruCa File List/Detailed ToruCa File Display,
ToruCa Settings
Using GPS Function, Position Location,
Map/GPS Compatible i-αppli, Provide Location,
Notify of Location, Location History, GPS Settings
Network Services
431
Overseas Use
449
PC Connection
459
Picture Viewer, i-motion Player, Movie Player,
Video Player, Chara-den, Machi-chara, Melody Player,
Kisekae Tool, microSD Card, Voice Recorder,
PDF Viewer, etc.
Appendix/
Troubleshooting
Multiaccess, Multitask, Reading Aloud,
Auto Power ON/OFF, Alarm, Schedule, ToDo,
Multi Key Long Press Setting, Own Number, Call Data,
Calculator, Bluetooth Function, Check Settings, etc.
Index/
Quick Manual
465
Check New Messages, Voice Mail, Call Waiting,
Call Forwarding, Nuisance Call Blocking,
Caller ID Request, Dual Network, Service Numbers,
Remote Control, Multi Number, 2in1, OFFICEED, etc.
Outline of International Roaming (WORLD WING),
Available Services, Confirmation for Using,
Making a Call at the Country You Stay,
Receiving a Call, 3G/GSM Setting,
Set Roaming Guidance, Network Services, etc.
Available Data Communication,
Before Using Data Communication,
Setup Flow for Data Transfer (OBEX™ Communication),
Setup Flow for Data Communication, AT Command,
CD-ROM, DOCOMO Keitai Datalink
Function List, Options and Related Devices,
Troubleshooting, Error Messages, Warranty and
After-sales Services, i-mode Fault Diagnosis Site,
Software Update, Scanning Function, Main Specifications,
SAR, Export Administration Regulations, etc.
Index, Quick Manual,
Quick Manual “For Overseas Use”
539
Character Entry, Mode 1 (5-touch), Common Phrases,
Cut/Copy/Paste, Own Dictionary, Learned Words,
Download Dictionary, Mode 2 (2-touch),
Mode 3 (NIKO-touch)
Easy Search/Contents/Precautions
i-αppli/i-Widget
i-αppli, i-αppli Download, i-αppli Run, iαppli Settings,
Starting i-αppli Automatically, iαppli Call,
i-αppli Stand-by Display, iαppli Data, i-Widget,
Start Widget Appli
Easy Search/Contents/Precautions
Main Functions of P-08A
◆i-concier !!P.222
i-concier is a service that enables you to receive useful information from a character
(Machi-chara image) on the Stand-by display and download schedule event
(i-schedule) files for your convenience.
Downloaded i-schedule events or ToruCa files are automatically updated to the latest
information, and the address information of shops/companies, etc. is automatically
added to the Phonebook.
◆i-αppli Call !!P.302
i-αppli call is a useful function for online games that enables your content provider or
third party to give notice to your opponent to start the specified corresponding
application.
◆International Roaming !!P.293, P.450
Your FOMA terminal, phone number, and mail address are available overseas (3G/
GSM areas are supported).
Further, “日英版／日中版 しゃべって翻訳 for P (J-E/J-C Speech Translation for
P)”, which translates words into English or Chinese if you talk in Japanese, and into
Japanese if in English or Chinese, is pre-installed.
◆i-mode !!P.190
You are now enabled to check websites more easily for information by enhanced
operational performance, and to enjoy various moving picture contents as Flash®
Video and Windows Media® Video are supported.
◆1Seg !!P.246
You can watch 1Seg programs of the terrestrial digital broadcasting for mobile
objects. By Moblie W-Speed, the outline of images are automatically corrected so
that you can watch more smooth videos of 1Seg programs. Also, the light sensor
automatically adjusts the backlight in accordance with the ambient brightness, and
the LCD AI compensates the image quality in accordance with the brightness.
◆Bluetooth Function !!P.412
The wirelessly-connected FOMA terminal and a Bluetooth device enable you to talk
or listen to music while you are carrying the FOMA terminal in your bag.
◆Impressive Liquid Crystal Display
You can check detailed battery level by 100 steps.
You can display still images and moving pictures in the Full Wide VGA (480 dots x
854 dots) display of approx. 3.1 inches and can enjoy watching 1Seg programs on
the impressive display.
Moreover, you can use the side key to shoot still images and moving pictures with
horizontal wide display just like using a digital camera.
◆i-Widget !!P.306
◆Feel＊Mail !!P.176
i-Widget is a useful function that enables you to easily access the tools and
commonly-used contents (Widget Appli) such as a calculator, clock, TV program list,
and stock prices information.
By launching the i-Widget display, you can check your desired latest information at a
glance.
Animation of 45 characters and illumination reproduce the atmosphere of mail
messages. Pleasant animation appears and illumination lights according to the
contents of mail message.
◆Display Battery !!P.43
◆View Blind !!P.113
You can make the display hard to see from an angle. You can use the FOMA
terminal without concern for others’ eyes.
Easy Search/Contents/Precautions
◆Speed Selector !!P.25
By the rotating operation, you can scroll displays and select items quickly. Further, in
various situation, you can comfortably operate functions such as volume adjustment
during music playback or during a call, and zoom adjustment for when shooting with
the camera.
◆Camera !!P.226
◆Swing Slide !!P.24
When you slide to open, the display slightly comes up to your side, so it is easy to see
and you feel the naturally-angled touch when putting it on your face during a call.
You can use approximate 8,100,000 pixels of high-precision camera to shoot still
images and moving pictures. Further, owing to Intelligent Auto, you can shoot still
images in a mode that is most suitable for your photographing scene, and can detect
the outline of a person’s face to automatically focus on his or her face.
Further, you can use a flare of flash or photo light when you are in a dim place for
shooting.
◆Recv. Mail/Call at Open !!P.111
When a missed call or new mail message is found, just open the FOMA terminal to
display the detailed Missed Call display or the Inbox list.
◆Voice Recorder !!P.380
You can record your voice as a substitute for taking notes. You can repeatedly play it
back, so it is convenient to record the proceedings at a meeting, etc.
◆Chaku-moji !!P.54
◆Videophone !!P.48
◆i-mode mail/Deco-mail/Deco-mail pictogram !!P.142, P.145, P.332
◆i-αppli/Mega i-αppli/Intuitive Games !!P.286
◆High-Speed Communication Supported !!P.460
◆Chaku-uta Full®/Uta-hodai/Music&Video Channel !!P.266, P.272, P.274
“Chaku-uta Full” is a registered trademark of Sony Music Entertainment Inc.
◆MUSIC Player !!P.274
◆GPS !!P.322
◆Osaifu-Keitai/ToruCa !!P.310, P.312
◆Kisekae Tool !!P.114, P.359
◆Respective Network Services !!P.431
◆Security Settings !!P.121
Easy Search/Contents/Precautions
Precautions
■The following symbols show specific directions:
ALWAYS FOLLOW THESE DIRECTIONS
■Before using the FOMA terminal, read these safety precautions carefully so that
you can use it correctly.
After reading the precautions, keep them in a safe place.
Denotes things not to do. (Prohibition)
Don’t
■Be sure to observe these safety precautions because they are designed to
protect you or those around you from causing injury and to avoid unnecessary
damage to the property.
■The symbols below indicate the levels of danger or damage that can be caused
if the particular precautions are not observed.
Danger
This symbol indicates that incorrect handling
will almost certainly cause death or serious
injury.
Warning
This symbol indicates that incorrect handling
poses a risk of causing death or serious
injury.
Caution
This symbol indicates that incorrect handling
poses a risk of causing injury or damage to
the product or property.
Denotes not to disassemble.
Do not
disassemble
Denotes not to touch with wet hands.
Not wet
hands
Denotes not to use where it could get wet or not to wet it.
Avoid
Water
Denotes mandatory instructions (matters that must be complied
with).
Do
Denotes to pull the power plug out of the outlet.
Pull the
power plug
out
■“Safety Precautions” are divided into the following six sections:
General precautions for FOMA terminal, batteries, adapters, and UIM... P.11
Precautions for FOMA terminal ................................................................. P.12
Precautions for batteries ............................................................................ P.14
Precautions for adapters............................................................................ P.15
Precautions for UIM.................................................................................... P.16
Notes on using near electronic medical equipment .................................. P.16
10
General precautions for FOMA
terminal, batteries, adapters, and UIM
Warning
Don’t
Do not use, store or leave the
FOMA terminal and its
accessories in places with a high
temperature such as near fire or
places exposed to direct sunlight,
or in cars under the blazing sun.
The devices could be deformed or
malfunction, or the battery may leak,
overheat, burst, or catch fire, thus resulting
in the deterioration of performance and
shortening of the life of devices.
Also, part of the case could get heated,
causing bare skin burns.
Don’t
Accidents such as fire, injury, or electric
shock, or malfunction may result. The
battery may leak, overheat, burst or
catch fire.
Don’t
Don’t
Do
If you use any type of battery or adapter
other than the specified one, your FOMA
terminal, battery or other accessories
may leak, overheat, burst, catch fire or
malfunction.
Do
Caution
The battery may leak, overheat, burst, or
catch fire. Also, malfunction or fire may
result.
Be careful not to let
electroconductive materials (metal
pieces, pencil leads etc.) contact
with the charging terminal or
connector terminal. Also, make
sure that those are not entered into
the inside of the FOMA terminal.
Short-circuit could cause fire or
malfunction of the FOMA terminal.
If liquids such as water or pet urine get
onto them, overheating, electric shock,
fire, malfunction, injury or others may
result. Pay attention to the place of use
and the way of handling.
With your FOMA terminal, use the
batteries and adapters specified
by NTT DOCOMO, INC.
If you use the FOMA terminal and its
accessories as they are, overheat, burst,
or catching fire could result or the
battery could leak.
Do not throw the FOMA terminal
or accessories, or subject them
to severe shocks.
Do not wet the FOMA terminal or
accessories.
Avoid
Water
Do
The battery may leak, overheat, burst, or
catch fire. The FOMA terminal or the
adapter may overheat, smoke, or catch
fire, or its circuit parts may become
damaged.
Do not disassemble, modify or
solder the FOMA terminal or
accessories.
Do not
disassemble
Do not place the batteries, the
FOMA terminal, adapters, or UIM
in cooking appliances such as
microwave ovens or
high-pressure containers.
When you are in a place such as a
gas station where flammable gas
is generated, turn off the FOMA
terminal, and never do charging.
Otherwise, catching fire may
result.
Ensure that you use Osaifu-Keitai with
the FOMA terminal turned off when you
are in the vicinity of the gas station.
(When IC Card Lock is set, turn off the
power with the lock released.)
Don’t
Do not place the FOMA terminal
or accessories on unstable
locations such as wobbly tables
or slanted locations.
The FOMA terminal or accessories may
fall, resulting in injury or malfunction.
Do not store in humid or dusty
places, or in high temperature
environments.
Don’t
Do
Malfunction may result.
If children use the FOMA terminal or
accessories, a guardian should
explain the safety precautions and
correct operations. The guardian
should also make sure that the
instructions are followed during use.
Otherwise, injury may result.
Keep out of the reach of babies
and infants.
Do
Accidental swallowing or injury may
result.
11
Easy Search/Contents/Precautions
Danger
If odor, overheat, discoloration,
or deformation is detected during
use, battery charge, or storage,
immediately observe the
following:
1. Pull the power plug out of the
outlet or cigarette lighter socket.
2. Turn off the power to the FOMA
terminal.
3. Remove the battery pack from
the FOMA terminal.
Easy Search/Contents/Precautions
Be especially careful when you
use the FOMA terminal for a long
time with the adapter connected.
Do
If you use i-αppli programs, talk on the
videophone, watch 1Seg programs and
so on for a long time during charging,
the temperature of the FOMA terminal,
battery pack, or adapter might rise.
If you directly touch the part of high
temperature continuously, redness,
itching, rash, or low-temperature bare
skin burns may result depending on your
physical conditions or predisposition.
Precautions for FOMA terminal
Don’t
Don’t
Don’t
Don’t
His/her eyes may possibly be affected.
Other infrared devices may operate
erroneously if the infrared data port is
pointed at them during transmission.
Doing so can damage eyesight. Also,
accidents such as injury might occur if
someone is startled or dazzled by the
light.
Do
If you have any implanted
electronic medical equipment, do
not place your FOMA terminal in
a chest pocket or inner pocket.
If the FOMA terminal is positioned close
to electronic medical equipment, it may
cause that equipment to malfunction.
Do not allow liquids such as
water, or foreign materials such
as metal pieces or flammable
materials to get into the UIM or
microSD card slot of the FOMA
terminal.
Do
Do not turn on the flash/photo
light to drivers of cars, and others.
Don’t
Otherwise, electronic devices and
electronic medical appliances may be
adversely affected. If the Auto Power
ON function is set, deactivate the
setting, then turn the power off.
For use inside medical facilities, make
sure that you comply with their
regulations. You may be punished for
using the FOMA terminal in airplanes,
which is prohibited by law.
When talking with the FOMA
terminal set to Hands-free, be
sure to keep the FOMA terminal
away from your ear.
Further, when you play games or
play back music with the
earphone/microphone
connected, adjust the sound
volume to moderate volume.
The excessive sound volume impairs
your hearing.
Further, accidents may result due to the
hardness of hearing of surrounding
sound.
Fire, electric shock or malfunction may
result.
Do not shine the flash/photo light
close to eyes.
Don’t
Turn off the FOMA terminal in
places where use is prohibited
such as in airplanes and hospitals.
If the airbag expands, the FOMA
terminal could hit you and others,
causing accidents such as injury and the
FOMA terminal could malfunction and
become damaged.
Warning
Do not directly point the infrared
data port at someone’s eyes
during transmission.
Do not put the FOMA terminal in
the place where it could be
affected by an expanded airbag,
e.g., on the dashboard.
For those with weak heart
conditions, the vibrator and ring
volume must be adjusted carefully.
It disturbs driving, and accidents may
result.
Do
Do
Those functions may cause an effect on
the heart.
If thunder starts to rumble while
you are using the FOMA terminal
outdoors, house the antenna,
turn off the power and move to a
safe place.
Otherwise, you could be struck by
lightning or suffer an electric shock.
12
The FOMA terminal may possibly cause
these devices to malfunction.
※Electronic devices that may be affected:
Hearing aids, implanted cardiac
pacemakers, implanted defibrillators,
other medical electronic devices, fire
alarms, automatic doors and other
automatically controlled devices. If you
use an implanted cardiac pacemaker,
implanted defibrillator or any other
electronic medical device, consult the
manufacturer or retailer of the device for
advice regarding possible effects from
the radio waves.
Do
If the display part or camera lens
is broken, be careful about
broken glasses or the exposed
interior of the FOMA terminal.
Plastic panels are used for the surfaces
of the display part and camera lens so
that glasses do not easily get scattered,
however, pay attention not to
erroneously touch the broken part or
interior. Otherwise, injury may result.
Caution
Do not swing the FOMA terminal
by its antenna or strap.
Don’t
Don’t
The FOMA terminal may hit you or
persons around you, and accidents such
as injury or malfunction and damage
may result.
Do not use in places crowded
with people.
Don’t
The antenna may hit against others,
causing an accident such as injury.
Otherwise, the loss of eyesight or injury
to your skin may result.
Do not use the FOMA terminal
with the damaged antenna.
Don’t
Don’t
If the damaged antenna comes in
contact with your skin, an accident such
as a burn or injury could be caused.
When using the motion tracking,
ensure that you check around
you for safety, securely take hold
of your FOMA terminal, and do
not swing to an extent more than
necessitated.
The motion tracking is the function to
incline or swing the FOMA terminal for
operation. If you excessively swing your
FOMA terminal, it might happen that it
hits against persons or objects, resulting
in critical accidents or damage.
Don’t
If you erroneously break the
display part and then crystal
liquid gets leaked, never take or
suck the liquid to or into your
mouth, or apply to skin.
If the crystal liquid gets into the
eyes or mouth, immediately rinse
it out with clean water and then
seek medical attention.
When it adheres to your skin or
clothes, immediately wipe it away
with alcohol etc., and then rinse it
out with water and soap.
Don’t
Do not bring your ears close to
the speakers while a ring tone
sounds or a melody is played
back from the FOMA terminal.
Otherwise, your hearing could be
impaired.
Electronic devices in some types
of cars can be affected by use of
the FOMA terminal.
Do
For safety’s sake, make sure not to use
the FOMA terminal inside such cars.
When a metallic strap is attached
to your FOMA terminal, be careful
that it does not hit against
persons or objects when using
the motion tracking.
Accidents such as injury or malfunction
and damage may result.
13
Easy Search/Contents/Precautions
Do
Turn off the FOMA terminal when
near electronic devices using
high-precision control or weak
signals.
Easy Search/Contents/Precautions
Do
Itching, rash or eczema may be
caused depending on your
physical conditions or
predisposition. If an abnormality
occurs, stop using the FOMA
terminal immediately, and then
seek medical attention.
Metals are used for the following parts:
Where it is used
Material
Finishing
Charging terminal Phosphor Gold-plated finish with
bronze
nickel-plated ground
Slide rail
SUS304 Fluorine coating
Metal
Top
Brass
Tin-and-cobalt-plated
part of
finish with
the 1Seg
nickel-plated ground
antenna Middle
SUS304
—
Hinge at SUS304 Tin-and-cobalt-plated
bottom
finish with
part
nickel-plated ground
Screw at Brass
Nickel-plated
bottom
part
Metal part of the
PC
Evaporated aluminum
speed selector
Shutter/
PushTalk key
Do
Be careful not to get your finger
or a strap caught in the parts
when you close or open the
FOMA terminal.
Accidents such as injury or damage may
result.
Do
When you watch a 1Seg program,
watch in a place bright enough
taking a certain distance from the
display.
Otherwise, your visual acuity could be
reduced.
14
Precautions for batteries
■Check the description on the label of the
battery pack for the type of battery.
Description
Li-ion
Type
Lithium-ion battery
Do
Otherwise, the loss of eyesight may
result.
Warning
Danger
Don’t
Do not let any metal object such
as a wire come in contact the
battery terminals. Also do not
carry or store the battery together
with any metal objects like a
necklace.
Don’t
Don’t
If charging is not completed at
the end of the specified charging
time, stop charging.
Do
The battery may leak, overheat, burst or
catch fire.
Do not throw the battery into fire.
The battery may leak, overheat, burst or
catch fire.
Do
Immediately stop using the FOMA
terminal and keep it away from
fire if the battery leaks or emits
an odor.
Be careful that your pets do not
bite into the battery pack.
Do not pierce it with nails, hit it
with a hammer, or step on it.
The battery may leak, overheat, burst or
catch fire.
Otherwise, the battery may leak,
overheat, become damaged or catch
fire.
The leaked battery fluid may ignite,
causing fire or burst.
Don’t
Don’t
When any abnormality due to
external shock such as the
deformation or scratches by
dropping is found on the battery
pack, immediately stop using it.
The battery may leak, overheat, burst, or
catch fire. Also, malfunction or fire may
result.
The battery may leak, overheat, burst or
catch fire.
Do not use excessive force to
attach the battery to the FOMA
terminal even when you cannot
attach it successfully. Also,
check that the battery is the right
way round when you attach it.
If the battery fluid gets into your
eyes, do not rub them. Flush your
eyes with clean water and seek
medical attention immediately.
Do
The battery may leak, overheat, burst, or
catch fire. Also, malfunction or fire may
result.
Caution
Don’t
The battery may catch fire or damage
the environment. After insulating the
battery terminals with tape, take the
unneeded battery to a handling counter
such as a docomo shop or dispose of it
in accordance with local waste disposal
regulations.
Don’t
If it starts to thunder, do not
touch the FOMA terminal and
adapter.
Don’t
Don’t
Don’t
Do
If the battery fluid comes in
contact with skin or clothes,
immediately stop using, then
rinse it out thoroughly with clean
water.
Never short-circuit the charging
terminal when the adapter is
plugged into the power outlet or
cigarette lighter socket. Also,
never touch the charging terminal
with fingers or other bare skin.
Do
Otherwise, fire may result.
Warning
The FOMA terminal may drop off, or the
adapter and desktop holder may
overheat, causing fire or malfunction.
Do
Do not use a damaged adapter
cord or power cord.
Do not place something heavy on
the adapter cord and power cord.
Electric shock, overheating or fire may
result.
When pulling the AC adapter into
the power outlet, firmly plug it in,
taking care not to contact with
metal straps or the like.
Otherwise, electric shock, short-circuit or
fire may result.
Electric shock or fire may result.
Don’t
Do not touch the adapter cord or
power outlet with wet hands.
Do not use the AC adapter and
desktop holder in steamy places
such as a bathroom.
Electric shock may occur.
If you use an unspecified fuse, fire or
malfunction may result. For the specified
fuse, refer to each instruction manual.
Keep the power plugs dust-free.
Do
Don’t
If you use it at a wrong voltage, fire or
malfunction may result. When using the
FOMA terminal overseas, use FOMA
AC adapter available overseas.
AC adapter: 100 V AC
DC adapter: 12/24 V DC
[For negative (-) grounded vehicles only]
AC adapter available overseas: 100 V to
240 V AC
[Connect only to household AC outlet]
If a fuse of the DC adapter has
blown, replace it with a specified
fuse.
Place the adapter and desktop
holder on a stable location while
charging. Do not cover or wrap
the adapter and desktop holder in
cloth or bedding.
Precautions for adapters
Don’t
You might be struck by lighting or suffer
an electric shock.
Fire, malfunction, electric shock or injury
may result.
Skin injury may result.
Don’t
Do
Fire may result.
Do not charge the wet battery.
The battery pack may overheat, catch
fire, or burst.
Use the adapter at the specified V
AC.
Electric shock may result.
Not wet
hands
15
Easy Search/Contents/Precautions
An exhausted battery should not
be disposed of with other waste.
The DC adapter is for use only in
a negative (-) grounded vehicle.
Do not use it in a positive (+)
grounded vehicle.
Easy Search/Contents/Precautions
Do
When removing the adapter out
of the outlet or cigarette lighter
socket, do not forcibly pull the
adapter cord or power cord,
instead take hold of the power
plug and then pull.
If you pull the plug out by the cord, the
cord may be damaged, which could
result in electric shock or fire.
Pull the
power plug
out
Pull the
power plug
out
Notes on using near electronic
medical equipment
■The description below meets “Guidelines on
the Use of Radio-communication Equipment
such as Cellular Telephones – Safeguards for
Electronic Medical Equipment” by the
Electromagnetic Compatibility Conference
Japan.
When the adapter is not to be
used for a long period of time,
unplug the power cord from the
outlet.
Comply with the following in
hospitals or health care facilities:
Do
Otherwise, electric shock, smoke or fire
may result.
Before cleaning, pull the power
plug out of the outlet or cigarette
lighter socket.
Pull the
power plug
out
Otherwise, electric shock may result.
Precautions for UIM
Caution
Do
Be careful not to touch the cut
surface of the UIM (IC portion)
when removing it.
Do
16
You may hurt your hand or fingers.
Operation of an implanted cardiac
pacemaker or implanted defibrillator can
be affected by radio waves.
Warning
Otherwise, electric shock, fire, or
malfunction may result.
If liquids such as water get in the
adapter, unplug the power cord
immediately from the outlet or
cigarette lighter socket.
Do
Do not carry the FOMA terminal into
operating rooms, intensive care units
(ICU) or coronary care units (CCU).
Turn off the FOMA terminal in hospital
wards.
If there is any electronic medical
equipment near you, turn off the
FOMA terminal even when in a
location such as a lobby.
Comply with any regulations of
hospital and health care facilities
instructing you not to use or carry in a
mobile phone.
If the Auto Power ON function is set,
deactivate the setting, then turn the
power off.
Turn off the FOMA terminal in
crowded areas such as inside
trains during rush hour, as
someone with an implanted
cardiac pacemaker or implanted
defibrillator may be near you.
Operation of an implanted cardiac
pacemaker or implanted defibrillator can
be affected by radio waves.
If you use an implanted cardiac
pacemaker or implanted
defibrillator, use the mobile
phone 22 cm or more away from
an implanted cardiac pacemaker
or implanted defibrillator.
Do
Patients using electronic medical
equipment other than implanted
cardiac pacemakers or implanted
defibrillators (outside medical
establishments for treatment at
home, etc.) should check the
influence of radio waves upon the
equipment by consulting its
manufacturer.
Operation of electronic medical
equipment can be affected by radio
waves.
Handling Precautions
General notes
■Do not wet the equipment.
The FOMA terminal, battery, adapter, and UIM are not
waterproofed. Do not use them in environments, which
are high in humidity such as in bathrooms, and do not
allow them to get wet from rain. Furthermore, if carrying
them against your body, they become moist due to
perspiration and the internal parts may become
corroded, causing malfunction. If the parts are found to
have been damaged due to exposure to the liquids, any
repairs will not be covered by warranty, or repairs may
not be possible. This may be repaired at a cost if
repairs are possible.
■Use a dry soft cloth such as the one for
cleaning glasses to clean the equipment.
■Occasionally clean the terminals of the
equipment using a dry cotton swab, etc.
The soiled terminals deteriorate the connection and
might cause power discontinuity or incomplete
charging. Wipe the terminals with a cotton swab, etc.
Take care not to damage the terminals when cleaning
them.
■Do not place the FOMA terminal near an air
conditioner outlets.
Condensation may form due to rapid changes in
temperature, and this may corrode internal parts and
cause malfunction.
■Do not apply excessive force onto the FOMA
terminal and battery pack.
If you put the FOMA terminal in a bag along with many
other articles or sit with the FOMA terminal in a clothes
pocket, the display, internal circuitry and the battery
pack could be damaged or malfunction. Also, if an
external device is left connected to the connector
terminal (earphone/microphone terminal), the
connector could be damaged, or malfunction.
■Carefully read each instruction manual
attached to the FOMA terminal, adapter, or
desktop holder.
Doing so might cause damage to the part, resulting in
trouble or malfunction.
Notes on handling the FOMA terminal
■Avoid using in extremely high or low
temperatures.
The FOMA terminal should be used within a temperature
range of 5°C to 35°C and a humidity range of 45% to 85%.
■The FOMA terminal, if operated near land-line
phones, television sets, radios or other
devices that are in use, may affect them. You
should operate your FOMA terminal as far
away from such equipment as possible.
■It is recommended that you make separate
notes of the information stored in the FOMA
terminal and keep such notes in a safe place.
We take no responsibility for any loss of the stored data
items.
■Do not drop the FOMA terminal or subject it to
strong impacts.
Malfunction or damage may result.
■Do not insert an external device to the
connector terminal (earphone/microphone
terminal) at a slant when connecting, and do
not pull it out when it is inserted.
Malfunction or damage may result.
■Make sure that nothing, such as a strap, gets
caught between the parts of the FOMA
terminal when you close it.
Otherwise, malfunction or damage may result.
■The FOMA terminal becomes warm during
use or charging but this is not an abnormality.
Use the FOMA terminal as it is.
■Do not leave the camera in places exposed to
direct sunlight.
■Usually, put the cover of the connector
terminal and microSD card slot to use the
FOMA terminal.
Dust or water might enter into the FOMA terminal,
causing malfunction.
■Do not use the FOMA terminal with the back
cover left removed.
The battery pack might come out, or malfunction or
damage may result.
■Do not put a label or sticker on the back of the
display part of the FOMA terminal.
They may be caught in when you open/close the FOMA
terminal, and malfunction or damage may result.
■While you are using the microSD card, never
take it off or turn off the power to the FOMA
terminal.
Data may be erased or malfunction may result.
■Do not place magnetic cards or similar
objects near the FOMA terminal or between
phone parts.
Magnetic data on cash cards, credit cards, telephone
cards and floppy disks, etc. may be deleted.
■Do not bring magnetic substances close to
your FOMA terminal.
Strong magnetic items might cause in erroneous
operation.
Notes on handling batteries
■Batteries have a limited life.
Though it varies depending on the usage state, you are
advised to replace the battery if its usable time is
extremely short even when you fully charge it. Make
sure that you buy the specified battery.
■Charge the battery in a place with an
appropriate ambient temperature of 5°C to
35°C.
Pixels may be discolored or burns may result.
17
Easy Search/Contents/Precautions
The screen of the FOMA terminal sometimes has a
special coating so that they are easier to see. If you
rub it roughly with a dry cloth, it might be scratched.
Take care of the way of handling, and use only a dry,
soft cloth such as the one for cleaning glasses. If the
screen is left with water drop or stain adhered, smear
may be generated or the coating might peel off.
Do not use alcohol, thinner, benzene, detergent or
other solvents for cleaning, otherwise the printing
may be removed or discoloration may result.
■Do not rub or scratch the display part with
metals.
Easy Search/Contents/Precautions
■Make sure that the battery is charged when
you use the FOMA terminal for the first time
or have not used it for a long period of time.
■The usable time of the battery differs
depending on the usage environment or its
remaining life.
■Depending on how the battery pack is used, it
might swell as its operating life becomes
short, but this is not a problem.
■Note the following points when you store a
battery pack over a long period:
Storage in a fully charged state (the state immediately
after charging is completed)
Storage with no battery power left (the state you cannot
turn on the power of the handset due to battery drain)
These may lower the battery pack’s performance and
shorten its operating life.
You are advised to store the battery pack in the state of
two or three bars of battery icon indication as a guide
for when you store it for a long period.
Notes on handling adapters
■Charge the battery in a place with an
appropriate ambient temperature of 5°C to
35°C.
■Charge the battery where:
There is very little humidity, vibration, and dust.
There are no land-line phones, television sets or
radios nearby.
■While you are charging, the adapter may
become warm. This is not a malfunction, so
you can keep on using.
■Do not use the DC adapter for charging the
battery when the car engine is not running.
The car battery could go flat.
■When using the power outlet having the
disengaging prevention mechanism, observe
the instructions given in that instruction
manual.
18
■Do not give a strong shock. Also, do not
deform the charging terminal.
Malfunction may result.
■Be careful not to get your finger or the
adapter cord caught in the parts when you
house the stand of the desktop holder.
Accidents such as injury or damage may result.
Notes on handling the UIM
■Never use more force than necessary when
inserting/removing the UIM.
■The UIM may become warm during use, but
this is not a sign of a malfunction. Continue
using it as it is.
■The warranty does not cover damage caused
by inserting the UIM into some other types of
IC card reader/writer.
■Always keep the IC portion clean.
■Use a dry soft cloth such as the one for
cleaning glasses to clean the equipment.
■It is recommended that you make separate
notes of the information stored on the UIM
and keep such notes in a safe place.
We take no responsibility for any loss of the stored data
items.
■For the environmental protection, bring any
unneeded UIMs to a handling counter such as
a docomo shop.
■Avoid using in extremely high or low
temperatures.
■Do not damage, carelessly touch, or
short-circuit the IC.
Data might be lost or malfunction may result.
■Do not drop the UIM or subject it to strong
impacts.
Malfunction may result.
■Do not bend the UIM or place something
heavy on it.
Malfunction may result.
■Into the FOMA terminal, do not insert the UIM
with a label or sticker pasted.
Malfunction may result.
Notes on using Bluetooth function
■As the security for communication using the
Bluetooth function, the FOMA terminal
supports the security function that meets the
Bluetooth Specification. However, the
security may not be sufficient depending on
the configuration. Take care of the security
for communication using the Bluetooth
function.
■Note that even if any leak of data or
information occurs while making connection
using the Bluetooth function, we take no
responsibility.
■With the FOMA terminal, you can use the
following: Headset, Hands-Free, Audio,
Dial-up Communication, Object Push, and
Serial Port. With Audio, you might be able to
use Audio Video Remote Control. (Only with
the compatible Bluetooth devices)
2.4 FH 1
2.4
FH
: Indicates radio facilities that use 2400 MHz
frequencies.
: Indicates the modulation system is the FH-SS
system.
: Indicates that a supposed coverage distance is
10 meters or less.
: Indicates that all radio frequencies 2400 MHz
through 2483.5 MHz are used, and that the
frequencies for mobile object identifiers shall
not be avoided.
■Cautions on Using Bluetooth Devices
Bluetooth operates at radio frequencies assigned to
the in-house radio stations for mobile object
identifiers that have to be licensed and are used in
production lines of a factory, specific unlicensed low
power radio stations, and amateur radio stations
(hereafter, referred to “another radio station”) in
addition to scientific, medical, industrial devices, or
home electric appliances such as microwave ovens.
1. Before using this product, make sure that
“another radio station” is not operating nearby.
2. If radio interference between this product and
“another radio station” occurs, move immediately
to another place or turn off power to avoid
interference.
3. For further details, contact “docomo Information
Center” on the back page of this manual.
Notes on handling the FeliCa reader/
writer
■The FeliCa reader/writer function on the
FOMA terminal uses very weak radio waves
which do not require to be licensed as radio
stations.
■The FeliCa reader/writer is operated on the
13.56 MHz frequencies. When you use
another reader/writer nearby, take enough
distance between your FOMA terminal and
the reader/writer. Further, ensure that there
are no radio stations that use the same
frequencies.
■Use the FeliCa reader/writer functions in
Japan only.
The FeliCa reader/writer functions on the FOMA
terminal have been authorized in compliance with the
radio transmission standards in Japan.
You might be imposed punishment if you use them
overseas.
Caution
■Do not use the modified FOMA terminal.
Using a modified FOMA terminal infringes the
Radio Law.
The FOMA terminals are granted technical regulations
conformity certification as the specified radio equipment
under the Radio Law and bear a “technical conformity
mark
” on the nameplate as evidence of conformity.
Unscrewing the FOMA terminal and modifying internal
components void the technical regulations conformity
certification. Do not use the FOMA terminal in this state,
which infringes the Radio Law.
■Be especially careful not to operate the FOMA
terminal while driving.
You will be imposed punishment if you use the mobile
phone in your hand while driving. If you answer a call
out of necessity, tell the caller with Hands-free that you
will call him/her back, park your car to somewhere safe,
and then dial.
■Use the Bluetooth functions in Japan only.
The Bluetooth functions on the FOMA terminal have
been authorized in compliance with the radio
transmission standards in Japan.
You might be imposed punishment if you use them
overseas.
19
Easy Search/Contents/Precautions
■Radio frequencies
The radio frequencies the Bluetooth function
of the FOMA terminal uses are as follows:
Easy Search/Contents/Precautions
Standard Accessory Kit and Main Options
P-08A Handset
(With Warranty and Back Cover P36)
P-08A CD-ROM
The PDF versions of “Manual for PC Connection”
and “Kuten Code List” are included.
FOMA AC Adapter 01/02
(With Warranty and Instruction Manual)
Instruction Manual
Quick Manual included (See page 550)
Battery Pack P19
Desktop Holder P33
(With Instruction Manual)
モ
NTT ドコ
Other Options → Page 500
20
Before Using the Handset
Part Names and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Opening/Closing FOMA Terminal. . . . . . . . . . . . . . . . . . . . . . . .
Navigation Displays and Key Operations . . . . . . . . . . . . . . . . .
Main Key Operations from the Stand-by Display . . . . . . . . . . .
Viewing Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using Icons on Desktop . . . . . . . . . . . . . . . . . .
i-Widget Display and Operations . . . . . . . . . . . . . . . . . . . . . . . .
Displaying Description of Icons . . . . . . . . . . . . . . . . . .
Selecting Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
When You Forget Key Operation . . . . . . . . . . . . . . . . .
Using UIM (FOMA Card) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Attaching/Removing Battery Pack . . . . . . . . . . . . . . . . . . . . . . .
Charging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Checking Battery Level . . . . . . . . . . . . . . . . . . .
Turning Power ON/OFF . . . . . . . . . . . . . . . . .
Switching to English Display . . . . . . . . . . .
Configuring Initial Setting . . . . . . . . . . . . . . . . .
Setting Date and Time . . . . . . . . . . . . . . . . . . . . . . .
Displaying World Time . . . . . . . . . . . . . .
Notifying the Other Party of Your Phone Number
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Checking Your Own Phone Number . . . . . . . .
22
24
24
26
27
29
32
32
32
37
37
39
40
42
43
44
44
45
46
46
46
21
Part Names and Functions
Before Using the Handset
■For using earphone
Connect an optional connector-terminal-compatible earphone. When using a
connector-terminal-non-compatible earphone, use an optional plug adapter for connection.
When inserting or pulling the plug adapter, take hold of the plug for the handset side and insert or pull
it straight. Be careful not to take hold of the cover of the connector terminal and plug for the handset
side together when you pull it out.
The Earphone Plug Adapter for External connector terminal 01 (option) can be connected with a
triple pole mini plug only. For details, refer to the instruction manual for the Earphone Plug Adapter
for External connector terminal 01.
22
Flat plug of the
Flat-plug Earphone/
Microphone with Switch
Earphone terminal (Flat-plug)
Example for connecting the Flat-plug
Earphone/Microphone with Switch (option)
Plug for the
handset side
Earpiece
・For listening to the other party’s voice
(Display
(See page 27)
*l Mail key
/m Menu key
&d Start key/Hands-free key
・For making/receiving calls (See page 48 and page 62)
・For talking with Hands-free (See page 61)
%h Power/End key
・For ending calls
・For ending respective functions
・For turning on the power (for at least one second)/
For turning off the power (for at least two seconds)
(See page 43)
1Flash/Photo light
・Lights/Flickers when you shoot with the camera.
・Used for shooting in a dark place. (See page 236)
#Numeric keys
・For entering phone numbers and text
;Back cover
・Remove this when attaching/removing the battery
pack and UIM. (See page 37 and page 39)
Do not peel off the sticker on the back of the back
cover. If you peel it off, you might not be able to read
and write the IC card.
'Connector terminal
・For connecting the AC adapter (option), DC adapter
(option), FOMA USB Cable with Charge Function 01/
02 (option), or Stereo Earphone Set 01 (option), etc.
Integrated terminal for connecting earphone or for
charging, etc.
2microSD card slot
・For inserting microSD card (See page 360)
8Charging terminal
-x Multi key
61Seg antenna
・For receiving 1Seg broadcasting (See page 247)
.< Side ▲ key
・For scrolling up page by page
3> Side ▼ key
・For scrolling down page by page
)Microphone
・For speaking to the other party
,Outside camera
・For shooting portraits and/or landscapes
(See page 226)
・For catching sight of persons and/or landscapes
during a videophone call
9Inside camera
・For shooting photos of yourself (See page 226)
・For displaying your face during a videophone call
=Infrared data port
・Used for infrared communication and the infrared
remote control. (See page 374 and page 378)
+o Speed selector
・For operation of function or menu (See page 25)
>f mark
・The IC card is mounted.
Use the IC card function placing this mark over the
scanning device. You cannot dismount the IC card.
(See page 311)
0r Clear key/i-Widget key
・For returning to the previous operation
・For clearing entered text or a phone number
$Call/Charging indicator
・Flickers for incoming calls/mail and during a call.
(See page 115)
・Lights in red during charging.
・Lights/Flickers when you shoot with the camera.
The flickering pattern and color tone of the illumination
might look different depending on the FOMA terminal
you use.
!i i-mode key/i-αppli key
"c Camera key/1Seg key
4p Shutter key/PushTalk key
・For making/receiving PushTalk calls
(See page 79 and page 82)
You can focus on a subject by pressing half way when
shooting with the camera. (See page 235)
Plays back a videophone record
Plays back a record message/voice
message/movie memo.
memo. (See page 71)
(See page 71)
.p
Shows the PushTalk Phonebook list. Activates MUSIC Player.
(See page 83)
(See page 275)
Viewing Display
&9
Radio waves reception level (estimate)
(yellow)
During i-mode communication (See page 190)
0 (yellow)
During SSL/TLS communication (See page 190)
Unread i-mode mail or an SMS message
exists. (See page 154 and page 186)
New i-concier information exists.
(See page 223)
An i-αppli call you did not reply to exists.
(See page 303)
The area for i-mode mail and SMS
(dark blue) messages in the FOMA terminal is full.
(See page 154 and page 186)
The area for SMS messages on the UIM
(FOMA card) is full.
(pink)
Unread mail exists, and the area for SMS
messages on the UIM (FOMA card) is full.
Both the FOMA terminal and UIM (FOMA
(dark blue) card) are full.
Location Request Set. is set to “ON” or
“Reject numbers unset”, and it is out of the
validity period. (See page 328)
A microSD card is inserted.(See page 361)
Messages R/F are held at the i-mode
Center. (See page 177)
i-mode mail is held at the i-mode Center
while Receive Option Setting is set to “ON”.
(See page 155)
You get out of the service area while
Network Search Mode is set to “Manual”.
(See page 455)
i-mode mail is held at the i-mode Center.
(See page 155)
Data is being read to/written from the
microSD card.
The box for Messages R/F at the i-mode
(dark blue) Center is full. (See page 177)
During PushTalk communication (See page 79)
(pink)
Location Request Set. is set to “ON” or
“Reject numbers unset”, and it is within the
validity period. (See page 328)
The box for i-mode mail at the i-mode
(dark blue) Center is full. (See page 154)
During i-mode (See page 190)
During measuring the current location
(See page 322)
The area for Messages R/F in the FOMA
(pink)
During Self Mode (See page 126)
During packet communication (The icon differs
depending on the communication status.)
Unread Messages R/F exist.
(See page 176)
(dark blue) terminal is full. (See page 177)
Weak
You are out of the FOMA service area or
radio waves do not reach.
'6
Battery level (estimate) (See page 42)
Strong
A write-protected microSD card is inserted.
(See page 361)
The inserted microSD card cannot be used.
(See page 361)
A microSD card is inserted, and the FOMA
USB Cable with Charge Function 01/02
(option) is connected in microSD Mode.
(See page 369)
A microSD card is inserted, and the FOMA
USB Cable with Charge Function 01/02
(option) is connected in MTP Mode.
(See page 369)
During a voice call
During a videophone call
During 64K data communication
(blue)
A Bluetooth device is connected.
(See page 415 and page 417)
(black)
A Bluetooth device is connected and power
consumption is low. (See page 415)
Area Mail exists. (See page 179)
27
Before Using the Handset
(/ ) $ "
* 0 + ! %
During Lock All (See page 124)
During Multitask (See page 391)
During Personal Data Lock (See page 127)
Multiple functions are activated.
(See page 391)
Before Using the Handset
During Keypad Dial Lock (See page 131)
During Secret Mode or Secret Data Only
(See page 133)
During IC Card Lock (See page 312)
Both Keypad Dial Lock and Personal Data
Lock are set.
During recording of a 1Seg program by
Timer Recording (See page 260)
Both IC Card Lock and Lock All are set.
Both IC Card Lock and Keypad Dial Lock
are set.
The FOMA USB Cable with Charge
Function 01/02 (option) is connected in
microSD Mode. (See page 369)
Type of in-use network (See page 451)
A USB Hands-free compatible device is
connected in microSD Mode. (See page 61)
You are in the OFFICEED area.
(See page 447)
Vibrator is set to other than “OFF”.
(See page 104)
Ring Volume is set to “Silent” or
Mail/Msg. Ring Time is set to “OFF”.
(See page 66 and page 106)
While Key Lock is temporarily released
(See page 132)
During Manner Mode (See page 106)
28
During talk or communication through a
USB Hands-free compatible device
(See page 61)
A USB Hands-free compatible device is
connected. (See page 61)
During Key Lock (See page 132)
An alarm is set.
(See page 260 and page 395)
A Music&Video Channel program is booked.
(See page 266)
Backlight is set to “OFF”. (See page 112)
View Blind is set to “ON”. (See page 113)
Backlight is set to “OFF” and View Blind is
set to “ON”.
USB Mode Setting is set to “microSD
mode”. (See page 369)
During infrared communication
(See page 374 and page 378)
The FOMA USB Cable with Charge
Function 01/02 (option) is connected in
Communication Mode.
IC Card Lock, Keypad Dial Lock, and
Personal Data Lock are simultaneously set.
Timer Lock ON At Close is set.
(See page 128)
During pause of 1Seg program recording
(See page 256)
During music pause (See page 275)
Both IC Card Lock and Secret Mode/Secret
Data Only are set.
IC Card Lock, Keypad Dial Lock, and Secret
Mode/Secret Data Only are simultaneously
set.
The call cost has exceeded the specified
limit. (See page 408)
During music playback (See page 275)
Both IC Card Lock and Personal Data Lock
are set.
While watching a 1Seg program
(See page 249)
During recording of a 1Seg program
(See page 256)
Both Keypad Dial Lock and Secret Mode/
Secret Data Only are set.
Remote Monitoring is set to “ON”.
(See page 77)
During Public mode (Drive mode)
(See page 68)
USB Mode Setting is set to “MTP mode”.
(See page 369)
∼
・ Voice mail messages for Number B are held
at the Voice Mail Center in Dual Mode of
2in1. (See page 446)
∼
・ Voice mail messages are held at the Voice
Mail Center. (See page 432)
∼
The number of record messages
(See page 69)
∼
The number of videophone record
messages (See page 69)
For the horizontal display, icons appear at the lower right
of the display.
The clock at the upper right of the display (at the lower
right of the horizontal display) does not appear when the
icon , or = is displayed.
Information
Some characters and symbols on the display might be
modified or abbreviated.
The color liquid crystal display uses high-precision
production technology. The slightest change in the
environment or other factors may result in unlit or
permanently lit pixels, but this is not a manufacturing
defect.
■Operation when a notification icon is selected
Missed call
Shows the Missed Call list. (See page 53)
Using Icons on Desktop
Notification icon
Desktop icon
■Operation when a status icon is selected
Shows the display for Vibrator. (See page 104)
Shows the display for Ring Volume. (See page 66)
Shows the display for Manner Mode Set. (See page 108)
Shows the display for Remote Monitoring. (See page 77)
Shows the display for releasing Public mode (Drive mode).
(See page 68)
Missed call to Number B of 2in1
Shows the Missed Call list. (See page 53)
Before Using the Handset
Status icon
Record message
Shows the Record Message list. (See page 71)
Videophone record message
Shows the Videophone Record Message list. (See page 71)
New i-mode mail or SMS
Shows the Inbox list. (See page 159)
New chat mail
Starts Chat Mail. (See page 183)
New Message R/F
Shows the Message R/F list. (See page 177)
Shows the display for Notice Call Cost. (See page 408)
Shows the list of Alarm, Schedule, ToDo, TV Timer, or Timer Recording.
(See page 257, page 258, page 394, page 398 or page 401)
i-αppli did not start automatically
Shows the i-αppli Auto Start Info. (See page 302)
Shows the Music&Video Channel display. (See page 266)
i-αppli call you did not reply to
Shows the i-αppli call logs. (See page 303)
Shows the display for Backlight. (See page 112)
Shows the display for View Blind. (See page 113)
Shows the display for “Set./Service” → “Display”.
A ToruCa file is received from a scanning device
Shows the ToruCa File list. (See page 316)
Shows the display for USB Mode Setting. (See page 369)
A security error occurred on the i-αppli Stand-by display
Shows the Security Error History. (See page 289)
∼
・
Shows the display for playing back Voice Mail messages.
(See page 433)
Success in downloading a Music&Video Channel program
Activates Music&Video Channel. (See page 266)
∼
・
Shows the display for playing back Voice Mail messages.
(See page 433)
Failure in downloading a Music&Video Channel program
Activates Music&Video Channel. (See page 267)
∼
Shows the display for Rec. Msg/Voice Memo.
(See page 69, page 71, page 104 and page 406)
Missed alarm
Shows the contents of the alarm that could not be notified. (See page 396)
∼
Shows the display for Rec. Msg/Voice Memo.
(See page 69, page 71, page 104 and page 406)
Missed TV timer
Shows the contents of the TV timer that could not be notified.
(See page 261)
29
Timer recording was completed
Shows the contents and results of the timer recording. (See page 261)
Before Using the Handset
Messages are held at the Voice Mail Center
Shows the display for playing back Voice Mail messages. (See page 433)
The Phonebook could not be updated by Data Security Service
Shows the update display for Data Security Service. (See page 137)
Shows it on the Picture viewer.※ (See page 334)
Plays it back by the i-motion player.※ (See page 342)
Plays it back by the Video player.※ (See page 350)
Plays it back by the Chara-den player.※ (See page 353)
Provide Location was executed automatically
Shows Location History. (See page 326)
Plays it back by the Melody player.※ (See page 356)
Provide Location could not be executed automatically
Shows Location History. (See page 326)
Shows it on the ToruCa viewer.※ (See page 314)
You did not respond to a location provision request
Shows Location History. (See page 326)
Shows it on the PDF viewer.※ (See page 381)
Shows the Bookmark Folder list. (See page 200)
Shows the Private menu. (See page 403)
Software Update is needed
Starts Software Update. (See page 517)
Shows the Still Image list for the storage location folder of the camera.
(See page 334)
Software Update was executed
Shows the Update Completion display or the reason for not completing.
(See page 518)
Shows the list of Alarm. (See page 394)
Software rewriting is possible
Shows the rewriting confirmation display. (See page 516)
Pattern data was updated automatically
Shows the updated result. (See page 521)
The FOMA terminal and a personal computer are connected by the FOMA
USB Cable with Charge Function 01/02 (option)
Shows the display for USB Mode Setting. (See page 369)
Charging stopped midway
Shows the message to the effect that charging stopped automatically.
(See page 42)
■Operation when a desktop icon is selected
Shows the Calendar display. (See page 398)
Shows the ToDo list. (See page 401)
Shows the list of Text Memo. (See page 408)
Shows the calculator. (See page 408)
Shows the display for 使いかたナビ (Guide). (See page 37)
Shows the Bar Code Reader menu. (See page 241)
Shows the Ir Data Receiving display. (See page 377 and page 378)
Shows the Camera menu. (See page 230 and page 233)
Shows the Bluetooth Function Selection display.
(See page 415, page 417, and page 419)
Starts Voice Recorder. (See page 380)
Shows the dialing display with the phone number entered.
(See page 48 and page 79)
Shows the i-concier display. (See page 223)
Shows the site of that URL. (See page 190)
Starts MUSIC Player. (See page 274)
Shows the site of that URL by Full Browser. (See page 192)
Shows the Viewer display. (See page 249)
Shows the Message Composition display with the mail address entered.
(See page 142)
Shows the SMS Composition display with the mail address entered.
(See page 185)
30
Starts the i-αppli program.※ (See page 287)
Shows the Music&Video Channel display. (See page 268)
Starts i-αppli Program Guide. (See page 254)
※ When the original data is deleted or overwritten, the desktop icon is disabled.
Information
Paste Icons to Desktop
You can paste up to 15 desktop icons of such as phone numbers, mail
addresses, etc.
Select “Add desktop icon” from the Function menu of
the item to be pasted !YES
If the addresses of the sender and another recipient of simultaneous mail are
found or the multiple destination addresses are found when you operate from the
Function menu of the detailed mail display, select a mail address or phone
number to be pasted.
Check Details of Desktop Icon
m!Set./Service!Display
!Desktop icon
The list of desktop icons pasted to the desktop is
displayed.
Information
You may not be able to paste the URL to the desktop depending on the site.
When the URL title exceeds 16 full-pitch/32 half-pitch characters, the excess is
deleted. If no title exists, up to 22 half-pitch characters of the URL excluding “http://” or
“https://” is displayed.
Some files and data might not be pasted to the desktop.
Proceed to Respective Functions from Icons on Desktop
Press"Oo.
Use Mo to highlight an icon, and press Oo(
Desktop Icon list
Select the icon whose details are to be displayed.
Function Menu of the Desktop Icon List
You can show the Function menu also by pressing i(
icon from the Stand-by display.
), while highlighting an
Add to desktop
!Put a check mark for the function to be added
!l(
Edit title
!Enter a title.
You can enter up to 16 full-pitch/32 half-pitch characters.
However, the number of characters for the title displayed when
you highlight the icon is up to 11 full-pitch/ 22 half-pitch
characters from the beginning of the title.
Sort
!Select a desktop icon!Use Bo to change the order
!Oo(
To change the order in succession, repeat the above steps.
).
Up to five “Desktop icons”
are displayed. If there are
six or more icons, “ ” and
“ ” are displayed.
A “Notification icon” is
deleted when each function
When a record message
is executed. To delete all
icon is selected
“Notification icons”, press
and hold r for at least one second from the display in step 1.
+m-6-3
!l(
)!YES
long press set. See page 404.
31
Before Using the Handset
When the notification icon of “Messages are held at the Voice Mail Center” (
appears while you are overseas, you cannot operate the Voice Mail function from the
notification icon. Follow the steps of “Operate Voice Mail Service at the Country You
Stay” on page 458.
Before Using the Handset
Reset desktop
The desktop icons are reset to the default.
!YES
Delete this
!YES
Delete all
!YES
Selecting Menu
Press m of the FOMA terminal to show Main Menu and then execute,
set, or check respective functions. In this manual, the way to call up
functions from Main Menu is described as a standard method.
Menus are classified by functions. (See page 466)
i-Widget Display and Operations
From the i-Widget display, you can simultaneously start multiple Widget
Appli programs and show them on a list.
7Widget Appli
You can show a Widget Appli program.
You can show the Widget Appli operation display by
selecting it.
Navigation displays
Navigations corresponding to the key operations are
indicated.
You can randomly change the display order of Widget
Appli programs by pressing i[シャッフル (Shuffle)]
from the i-Widget display.
See page 306 for detailed operations of i-Widget.
■Scroll Selection
Main Menu is composed of 12 main menu icons indicating each function.
If you select a main menu icon, the Sub-menu Item Selection display appears. If you
further select a sub-menu item, the Lower Sub-menu Item Selection display appears.
By repeating selecting, you can set and check the function.
■Menu Number Selection
You can display some functions by pressing m + menu number (see page 466).
■Multitask is Supported
You can simultaneously use some functions in Main Menu. (See page 391)
i-Widget display
+m-3-6
Displaying Description of Icons
The symbols on the display (such as , , and
can check the meanings of them on the display.
32
m!Set./Service!Display!Icons
!Use Mo to highlight an icon.
Some functions can be selected also by the operation other than pressing m. In this
case, the operation by the easier way is described.
This FOMA terminal supports Kisekae Tool (see page 114). If you use Kisekae Tool to
change the design of the Menu display, some menu configurations change according
to the usage frequency depending on the type of the menu.
Further, some menu numbers that are assigned to the menu items do not apply.
) are called icons. You
Scroll Selection
Select a main menu icon from the menu function
Select “Set./Service” from Main Menu. Main Menu at purchase differs depending on the
body color. (See page 471)
Description Example of Steps
Main menu icon
Sub-menu item
Function name of lower sub-menu item
1 mSet./ServiceTalkQuality alarmSelect an alarm.
No tone. . . . . . . . . Does not sound.
High tone. . . . . . . . High alarm sounds.
Low tone. . . . . . . . Low alarm sounds.
M*
Items which appear on the display
Main Menu
O*
Press *Mo to highlight the icon. Press and hold *Mo to scroll
the icons continuously.
If you have not touched any key for 15 seconds, the
Stand-by display returns.
33
Before Using the Handset
In this manual, the description of the speed selector operation (selection
of top/bottom/left/right, and press of Oo after selecting/entering a
function item) is omitted. Scroll selection is explained below using the
example of selecting the function “Quality alarm”:
Before Using the Handset
Select a sub-menu item from the menu function
Select “Talk” from “Set./Service”.
*Oo
Set or check the function
Some menu items have even more detailed menus.
The example below shows how to set “Low tone” for “Quality alarm”.
*Oo
The highlighted item is the currently
selected one.
Press *Xo to highlight the item
to highlight the item
below, and Zo
above.
Press and hold *Bo to scroll the
items continuously.
Press *No to scroll page by page.
Select a desired lower sub-menu item (function)
Select “Quality alarm” from “Talk”.
The highlighted item is the currently
selected one.
Press *Xo to highlight the item
below, and *Zo to highlight the item
above.
Press and hold *Bo to scroll the
items continuously.
Menu Number Selection
Menu Number Selection is explained below using the following example:
Description Example of Menu Number
*Oo
and *Zo to highlight the item above.
Sounding Alarm when a Line is Nearly Disconnecting
Press and hold Bo
to scroll the items
continuously.
When the items are listed over
multiple pages, the total number of
pages and the current page number
are shown at the upper right of the
display.
34
Menu number
Press o
*X
to highlight the item below,
-7-5
Function Menu
Call up the function using the menu number
+m
-7-5
Simple Menu
Simple Menu is a menu focusing on only basic functions for easy
operation. By setting “Menu icon setting” to “Simple menu”, you can
show the Simple Menu by pressing m from the Stand-by display.
Some operating procedures or items which appear on the display in Simple Menu differ
from the ones described in this manual.
See “Simple Menu Function List” on page 486 for the contents of Simple Menu.
When the items are listed
over multiple pages, the total
number of pages and the
current page number are
shown at the upper right of
the Function Menu display.
+i
Description Example for Function Menu
In this manual, the operation of the Function menu is described as
follows:
Item displayed in the Function menu
Operating procedures after selecting
an item in the Function menu
Delete all
You can delete all files.
Enter your Terminal Security CodeYES
35
Before Using the Handset
From the Stand-by display, press m75.
If you press i when “
” is shown at the lower right of the display,
the Function menu including selectable items such as “Save”, “Edit”,
and “Delete” appears in each operation. The contents of the Function
menu depend on the display from which you show the Function menu.
An actual operation is done as follows:
Before Using the Handset
Press +i(
Check box
).
Use *Mo to highlight
“Delete all” and press
*Oo(
).
Enter your Terminal
Security Code and press
*Oo(
).
Use *Bo to highlight
“YES” and press
*Oo(
).
With the functions you can select multiple items, put a check
mark for check boxes to select them.
Each time you press Oo(
), you can switch “
” and
“
”.
With some functions, you can put or clear check marks at a time by pressing i(
and selecting “Select all/Release all” or by pressing m(
).
“
” is placed to the selected item depending on the function.
After finishing the operation
The Lower Sub-menu Item Selection display is shown. When you press h, the
Stand-by display returns (except during Multitask). The Stand-by display or the former
display automatically returns depending on the function.
To cancel the operation midway
To select an item quickly
Press h. The contents of the setting are abandoned and the Stand-by display or the
former display returns. The confirmation display appears asking whether to abandon the
setting contents depending on the function. You can press r to return to the previous
operation.
When the “YES/NO” selection display appears
Press the numeric key corresponding to the
displayed item number.
Press Bo to highlight “YES” or “NO”, then press Oo(
).
Item number
Item scroll
When menu items are listed over multiple pages, you can show the previous/next page
by pressing Bo with the uppermost/lowermost item highlighted. You can press No to
scroll through page by page. When
is displayed on the display, you can
scroll through page by page also by pressing m(
)/c(
).
Depending on the display being shown, such as lower sub-menu items, you might be
able to scroll through page by page also by pressing instead of No.
36
For Reset Settings
When You Forget Key Operation
m!ステーショナリー (Stationery)
!使いかたナビ (Guide)!Select an item.
おすすめ機能 (Recommendable functions)
. . . Displays the recommendable functions. Go to step 3.
キーワード検索 (From keywords)
. . . Enter keywords and retrieve. Go to step 2
機能一覧検索 (From Function list)
. . . Retrieves from the function list. Go to step 3.
検索履歴 (Search history)
. . . Displays up to 30 search histories. Go to step 3.
Highlight each item and press l(
); then the
detailed operating methods are displayed.
The 使いかたナビ (Guide) display appears also by selecting the 使いかたナビ
(Guide) icon “
” pasted on the desktop at purchase.
You can store “使いかたナビ (Guide)” for Multi Key Long Press Setting. (See
page 404)
Insert/Remove
You need to turn off the power and then remove the battery before you
insert the UIM. (See page 39)
■Inserting
With the golden IC surface
downward, push the UIM slowly
to the end while pressing the
surface of it.
Cut
Enter a keyword.
Up to 50 search results are displayed.
You can enter up to 24 full-pitch/48 half-pitch characters.
Select a function!Select an item.
機能の説明 (Description) . . . . . . . .Displays explanations for the function.
操作のしかた (How to operate) . . .Displays the operating method.
この機能を使う (Operate function)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Executes the function. Operate each function.
For some functions, press Oo(
) several times for selection.
You can display explanations about the function also by pressing l(
while highlighting the function.
To delete search history, press i(
) and select “1件削除 (Delete this)” or
“全削除 (Delete all)”, then select “YES”.
■Removing
While sliding the UIM, pull it out
slowly.
37
Before Using the Handset
You can search for the functions you want to know and use, and then
check the operating methods. You can execute some functions from
“使いかたナビ (Guide)”. This function is available in Japanese Mode only.
Using UIM (FOMA Card)
The UIM is an IC card that holds your information such as phone
numbers. It can hold data such as Phonebook entries and SMS
messages as well. By sharing a UIM, you can operate multiple FOMA
terminals for multiple purposes.
You cannot use the FOMA terminal for communication such as voice and
videophone calls, i-mode, sending/receiving mail, or packet
communication unless the UIM is inserted.
For details on how to use the UIM, refer to the UIM instruction manual.
When inserting or removing the UIM, take care not to accidentally touch
or scratch the IC.
Before Using the Handset
Information
Make sure that you insert/remove the UIM with the FOMA terminal closed and held in
your hand.
Take care not to force the UIM into place because this can break it.
Take care not to lose the UIM once you remove it.
When you replace your UIM (except during Omakase Lock), you need to enter the
four- to eight-digit Terminal Security Code after turning on the power. When you enter
the correct Terminal Security Code, the Stand-by display appears. If you enter the
incorrect Terminal Security Code five times in succession, the power turns off.
(However, you can turn on the power again.)
Security Code
You can set two security codes, PIN1 and PIN2, for a UIM. (See page 122)
Security Function of UIM
The FOMA terminal has the UIM security function (UIM restriction
function) as a security function to protect your data files.
If you obtain data files by the method below with the UIM inserted, UIM
security function is automatically set to them.
・When downloading images or melodies and so on, from sites or
Internet websites
・When receiving i-mode mail with file attachments
The data files with the UIM security can be browsed, played back, started,
edited, attached to mail, or transferred via infrared rays only when the
UIM used for obtaining is inserted. When the UIM used for obtaining the
data or files is not inserted, or when another UIM is inserted, these
functions are not operable.
In the explanation hereafter, the UIM used to obtain data and files is referred to
as “your UIM” and other UIMs as “another person’s UIM”.
38
♪♪♪♪♪
Your UIM
♪♪♪♪♪
Another
person’s UIM
If the UIM used for
obtaining data files
or mail messages is
inserted, you can
browse/play back the
data files with the UIM
security.
Replacing UIMs
Unless the UIM used
for obtaining data files
or mail messages is
inserted, you cannot
browse/play back the
data files with the UIM
security.
When the UIM is not inserted or when another person’s UIM is inserted, the following
types of data and files are displayed with the restrictions symbol, “
”:
・Videophone record messages ・Movie memos
・Screen memos
・Templates
・i-αppli programs
・Images
・i-motion files
・Chara-den images
・Melodies
・Machi-chara images
・Kisekae Tool files
・PDF files
・Downloaded dictionaries
・Chaku-uta®/Chaku-uta Full® music files
・Files attached or pasted to i-mode mail in the Inbox
・Files attached to i-mode mail in the Outbox/Draft (except the data shot or edited
with the FOMA terminal)
・Messages R/F with files (melodies or images) attached or pasted
・Images inserted into Deco-mail text
※This function applies to the pre-installed i-αppli programs, Chara-den images,
Deco-mail pictograms, etc. if they are reinstalled (upgraded) from a site.
※“Chaku-uta” is a registered trademark of Sony Music Entertainment Inc.
The preview image for the data file with the UIM security appears as
shown on the right.
Information
Types of UIM (FOMA Card)
If you use the blue UIM with your FOMA terminal, note that following
specifications differ from those of the green/white UIM:
Functions
UIM
Reference
(blue)
(green/white)
20 max.
26 max.
89
Operation of user certificate to use
FirstPass
Not available
Available
213
Use of WORLD WING
Not available
Available
450
Use of Service Numbers for “DOCOMO
repair counter” and “General inquiries
”
Not available
Available
439
Number of digits of the phone number
that can be stored in the UIM Phonebook
■WORLD WING
WORLD WING is the DOCOMO FOMA international roaming service that enables
you to use the current phone number overseas for making and receiving calls using
the UIM (green/white) and service compatible mobile phone.
You do not need to subscribe to WORLD WING if you have subscribed to the FOMA
service after September 1, 2005. If you offered that you did not need WORLD WING
at the time you signed up for the FOMA service, or when you have midway canceled
WORLD WING, you are required to take the procedures to newly subscribe to
WORLD WING.
If you have signed up for the FOMA service before August 31, 2005, and have not
yet subscribed to WORLD WING, you are required to subscribe to it.
This service is not available with some billing plans.
If you lose your UIM (green/white) or have it stolen overseas, immediately contact
DOCOMO to take the steps necessary for suspending the use of the UIM. For
inquiries, see “docomo Information Center” on the back page of this manual. Note
that you are still charged the call and communication fees incurred after you lose it or
have it stolen.
Attaching/Removing Battery Pack
Use the FOMA terminal’s dedicated Battery Pack P19.
■Attaching
While pressing the “ ” part of
the back cover in the direction A,
slide the back cover (2 mm or
more) in the direction B to
unlock and remove it.
Securely hold the FOMA terminal not to let it
open and then remove the back cover.
With the arrow mark facing up, fit
the tab side of the battery pack to
the FOMA terminal securely, and
then push the battery pack into
the direction B while pressing it
against the direction A.
Arrow mark
39
Before Using the Handset
When the UIM security is set for data files, you cannot set them for the functions such
as “Display setting” and “Select ring tone” when another person’s UIM is inserted.
When the data files with the UIM security is set for “Display setting” or “Select ring
tone”, the FOMA terminal works with their default settings if you remove your UIM or
replace it with another person’s UIM. Also, a Machi-chara image is cleared. If you
insert your UIM again, your settings are enabled again.
The UIM security function is not set for the data files received using the infrared
communication function or data transmission (OBEX™ communication) function and
the still images/moving pictures shot or edited with the FOMA terminal.
Even when another person’s UIM is inserted, you can move/delete data files with the
UIM security.
The settings of the following functions are stored on the UIM:
・SMS validity period
・SMS center setting
・Select language
・PLMN setting
・PIN1 code, PIN2 code
・PIN1 code entry set
・Validating/Invalidating DOCOMO Certificate 1 and user certificate
Before Using the Handset
Put the back cover to the FOMA
terminal as illustrated, and while
pressing the whole part of back
cover downward, slide it in the
direction of the arrow to attach it.
Charging
Use the FOMA terminal’s dedicated Battery Pack P19.
Life of battery pack
Confirm there is no gap between the back
cover and the FOMA terminal.
■Removing
Remove the back cover
following the step 1 of
“■Attaching”, and take hold of
the projection of the battery pack
to lift it up.
Projection
Information
Make sure that you turn off the power, hold the closed FOMA terminal in your hand,
and then attach/remove the battery pack. Also, take care not to press the one-push
open button when you attach/remove the battery pack.
If you try to force the battery pack into place, you could damage the UIM or the
terminal part of the FOMA terminal.
40
Battery packs are consumables. The usable time shortens slightly each time they are
charged.
When the usable time of the battery pack becomes half the time it was purchased,
replacing is recommended because the battery pack is nearing the end of its life.
Depending on the use conditions, the battery pack may swell as it nears the end of its
life, but this is not a problem.
The life of the battery pack may shorten if you use i-αppli programs, talk on the
videophone, watch 1Seg programs and so on for a long time during charging.
To prevent damage to the environment, bring used battery
packs to a docomo service counter, a docomo agent or a
recycle center.
Li-ion 00
Charging
For details, refer to the instruction manuals for the FOMA AC Adapter 01/02 (option),
FOMA AC Adapter 01 for Global use (option), and FOMA DC Adapter 01/02 (option).
The FOMA AC Adapter 01 supports 100 V AC only. The FOMA AC Adapter 02 and
FOMA AC Adapter 01 for Global use support from 100 V AC through 240 V AC.
The shape of the plug for the AC adapter is for 100 V AC (for domestic use). To use the
AC adapter that supports from 100 V AC through 240 V AC overseas, you need to
have a conversion plug adapter that is compatible with the voltage of the country you
stay. Do not use a transformer for overseas travel to charge the battery pack.
Even during charging, you can still answer calls if the FOMA terminal is turned on. This
will consume the charged amount so that charging will take longer. Also, the standby
time or talk time might be shorter if you charge the battery pack with your FOMA
terminal open.
If you have a long time videophone call during charging, the temperature in the FOMA
terminal may rise and charging may be suspended. In such a case, wait for a while and
try charging again.
Remove and insert the connector slowly and carefully, without using unnecessary
force.
Do not remove the battery pack during charging.
Do not charge for long periods of time (several days) with the FOMA
terminal turned on.
Estimated usable time for battery pack (The usable time for the battery pack
varies with the charging time and the remaining life of the battery pack.)
Continuous FOMA/3G 3G/GSM setting
standby time
[3G]
3G/GSM setting
[Auto]
GSM
3G/GSM setting
[Auto]
Continuous FOMA/3G
talk time
GSM
1Seg watching time
Estimated time for charging battery pack
AC adapter
Approx. 120 minutes
DC adapter
Approx. 120 minutes
※The charging time is an estimate of time for when empty battery pack is charged with
the FOMA terminal turned off. The charging time will be longer if you charge the
battery pack with the power of the FOMA terminal turned on.
In motion: Approx. 390 hours
Standstill: Approx. 620 hours
In motion: Approx. 370 hours
Standstill: Approx. 270 hours
Voice call: Approx. 200 minutes
Videophone call: Approx. 110 minutes
Voice call: Approx. 260 minutes
Approx. 220 minutes
(when Mobile W-Speed is OFF:
Approx. 270 minutes)
(in ECO Mode: Approx. 380 minutes)
※The continuous talk time is the estimated time that the FOMA terminal can be used for
calls when radio waves can be sent and received normally.
※The 1Seg watching time is the estimated time for when radio waves can be received
normally with the Stereo Earphone Set 01 (option) connected.
※The continuous standby time is the estimated time for when radio waves can be
received normally. The talk/communication time and standby time could be about half
of the estimate and 1Seg watching time could be shorter depending on the charge
level of the battery pack, function settings, other ambient conditions such as
temperature, and the status of radio waves in the area (weak or no radio waves, for
instance). When you use i-mode communication, the talk/communication time and
standby time will be shorter. Further, even if you do not make calls or not execute
i-mode communication, the talk/communication time and standby time will be shorter if
you watch 1Seg programs, compose i-mode mail, start up a downloaded i-αppli
program or the i-αppli Stand-by display, execute data communication or Multiaccess,
use the camera, play back i-motion files, movie files or music, or use Bluetooth
connections.
※The continuous talk time and the continuous standby time may be shortened
depending on the network environment in the country you stay.
Charge with AC Adapter and Desktop Holder
Plug the connector of AC
Adapter (option) horizontally
with its engraved side facing
down into the connector
terminal of the Desktop Holder
(option).
Call/Charging
indicator
Pull out the AC Adapter's plug,
and plug it into a household
power socket of 100 V AC. Stopper
Power
socket
Lock claw
Connector
Desktop Holder
Engraved surface
(down side)
AC
Adapter’s
plug
AC Adapter
41
Before Using the Handset
If you leave the FOMA terminal powered on for long periods of time during charging,
you may not be able to use the FOMA terminal for long duration as expected and the
low battery alarm may sound soon, because the FOMA terminal receives the power
from the battery pack after charging is completed. If this happens, charge the battery
pack correctly. When charging the battery pack again, first remove the FOMA terminal
from the AC adapter (or desktop holder) or DC adapter and then set it again.
※The continuous standby time for standstill is the average number of hours you can use the
FOMA terminal in standstill status when it is closed and can receive radio waves normally.
※The continuous standby time for in motion is the average number of hours you can
use the FOMA terminal in the combined status of “standstill” “moving” and “out of the
service area” when it is closed, in an area where it can receive radio waves normally.
Before Using the Handset
Put the bottom of the FOMA terminal into the stopper of
the desktop holder (A) to fit the head to the lock claw,
and then depress the FOMA terminal until it clicks (B).
Check that the Call/Charging indicator lights in red.
When the Call/Charging indicator flickers, dismount the AC adapter and battery
pack from the FOMA terminal and then re-mount them for charging.
If the symptom persists, troubles with the AC adapter, desktop holder or battery
pack may be involved, so consult a handling counter such as a docomo shop.
The charging confirmation tone (see page 105) sounds when charging starts and
ends. However, it does not sound when the power is off or during Manner Mode
or Public mode (Drive mode).
Be sure to set the FOMA terminal firmly onto the desktop holder. Also, be careful
that the connector cover or a commercial strap is not caught between the FOMA
terminal and desktop holder.
When charging is completed, hold the desktop holder
with fingers and lift up the head of FOMA terminal to
remove.
Unplug the AC adapter from the power socket when you are not going to use it for
a long time.
■Indicator and display during charging and when charging is completed
Charging
Charging completed
Call/Charging indicator
Battery icon
Lights in red
Blinks
Off
Lights
When the FOMA terminal is turned off, the battery icon does not appear.
If you start charging with the battery flat, the Call/Charging indicator might not light
immediately; however, charging itself has started.
When charging automatically stops for safety, “
” might be displayed on the
desktop.
■Stand
Standing up the desktop holder to put the FOMA terminal with a slope makes easier to
watch 1Seg programs, etc. For details, refer to the instruction manual for the desktop
holder.
When charging only with the AC adapter
Insert the connector with the engraved surface
facing up until it clicks. Pull straight the connector
out while pressing the release buttons.
To charge the battery, place the cover of the
connector terminal as illustrated. Pull out the
cover of the connector terminal to direction A,
and turn it as direction B.
※Check the facing direction (front or rear) of the
AC adapter plug and then insert or pull it
horizontally into or out of the FOMA terminal.
Malfunction could result if you try to pull it
forcibly.
Release
buttons
Engraved
surface
■DC adapter (option)
With the DC adapter, you can use a cigarette lighter socket (12 V/24 V) of cars to
charge the FOMA terminal with the battery pack attached.
For details, refer to the instruction manual for the FOMA DC Adapter 01/02.
Information
If the fuse blows off when charging with the DC adapter, be sure to use a 2A fuse. The
2A fuse is consumables, so purchase at auto parts stores in your neighborhood.
Checking Battery Level
When you turn on the FOMA terminal, an estimate of the battery level is
indicated. It is indicated by icons when you set “Battery” of “Display
setting” to “Icon”, and it is indicated in percent figures when you set it to
“Numerals”.
Battery level
Icon display
Numerals display
Almost full
∼
Slightly low
∼
Getting low
∼
Fairly low
∼
Almost empty
∼
Charge the battery pack when it is almost empty.
42
Cover
Information
Depending on the usage state, the battery level indication might significantly vary.
Turning Power ON/OFF
You can check an estimate of the battery level by the display and sound.
m!Set./Service!Other settings!Battery
!Battery level
Almost full
Five beeps
Slightly low
Four beeps
Fairly low
Two beeps
Almost empty
One beep
Getting low
Three beeps
※Almost empty.
Charge the battery pack.
Turn Power On
Press and hold h for at least one
second.
Before Using the Handset
Check Estimate of Battery Level by Display and Tone
After the Wake-up display (see page 110) is displayed,
the Stand-by display appears.
It may take a while for the Wake-up display to appear.
If Set Time is set, the current date and time are shown.
When “
” is displayed, the FOMA terminal is out of
the service area or in the place where the radio waves
do not reach. Move to a location where “
”
disappears.
Stand-by display
When your UIM is replaced (except during Omakase Lock)
The estimate of the battery level is indicated in percent figures below the
pictograms.
The pictogram disappears in about three seconds.
The battery level tone does not sound during Manner Mode or when you set
“Keypad sound” to “OFF”.
When the battery is running out
When the battery runs out, the display on the right appears and
the low battery alarm sounds for about 10 seconds. To stop
this alarm, press any key other than < and >. About one
minute later, the FOMA terminal will be turned off.
During a call, a beeping tone from the earpiece notifies you of
the low battery. About 20 seconds later your call will be cut
Recharge Battery
and then one minute later the FOMA terminal will be turned
display
off.
The low battery alarm may sound when the battery level becomes about 10 percent or
less.
Enter the four- to eight-digit Terminal Security Code after turning on the power. When
you enter the correct Terminal Security Code, the Stand-by display appears. If you enter
the incorrect Terminal Security Code five times in succession, the power turns off.
(However, you can turn on the power again.)
When “PIN1 code entry set” of “UIM setting” is set to “ON”
Enter the four- to eight-digit PIN1 code after you turn on the power. When you enter the
correct PIN1 code, the Stand-by display appears. See page 122 for PIN1 code.
When “Auto reset setting” of “Notice call cost” is set to “ON”
(except during Omakase Lock)
Enter the four- to eight-digit PIN2 code after you turn on the power. When you enter the
correct PIN2 code, the Stand-by display appears. If you press r or h without
entering the correct PIN2 code, “Auto reset setting” is set to “OFF” and the Stand-by
display appears. See page 122 for PIN2 code.
43
Before Using the Handset
Check Welcome Mail
The mail messages “Welcome
ドコモ動画
(Welcome
DOCOMO moving
picture
)” and “緊急速報「エリアメール」のご案内 (Introduction of Early Warning
“Area Mail”)” have been saved by default. Press Oo twice or perform step 1 of “Display
Mail from Inbox” on page 158 to show the Inbox list.
Information
Each entry display appears in the order of “PIN1 code” → “Terminal Security Code”
→ “PIN2 code”.
Configuring Initial Setting
If the date and time, Terminal Security Code, Keypad Sound, Speed
Selector Sound, Location Request Set., or Font Size Setting is not set, the
Initial Setting display appears when you turn on the power. You can set
the initial settings also from each menu function separately.
Turn on the power!YES
Set the date and time.
Set Keypad Sound.
Turn Power Off
Press and hold h for at least two seconds.
The exit display appears and the power turns off.
You cannot turn on the power immediately after turning off the power. Wait a few
seconds.
+m-1-5
Switching to English Display
m!設定／サービス (Set./Service)
!ディスプレイ (Display)!バイリンガル (Select language)
!Japanese (日本語) or English (英語)
The following functions are different between Japanese display and English display:
Functions
Japanese
English
“Clock” of Display Setting
→ “Stand-by clock” → “Day of week”
Available
Not available
使いかたナビ (Guide)
Available
Not available
Voice Guidance
Available
Not available
Information
When you insert the UIM, the “バイリンガル (Select language)” setting is stored on
the UIM.
44
When the display for entering your Terminal Security
Code, PIN1 code, or PIN2 code appears, follow the
operation on page 43.
You can select “Auto time adjust ON” or “Auto time adjust OFF” for setting the time.
(See page 45)
Set your Terminal Security Code.
You can set your Terminal Security Code required for setting functions.
(See page 122)
1. Enter “0000”!Enter your new Terminal Security Code (four to eight digits)
!YES
You can set whether to make a keypad sound. (See page 105)
Set Speed Selector Sound.
You can set the sound for when you rotate the speed selector. (See page 105)
Set Location Request Set..
You can set whether to notify your current location for when a GPS location
provision request arrives. (See page 328)
7
Set the size of characters.
You can set the size of characters on the display at a time. (See page 118)
Information
+m-3-1
Setting Date and Time
You can select whether to correct the time automatically or set it
manually. The time is set/displayed on the 24-hour basis.
m!Set./Service!Clock!Set time
!Auto time adjust ON or Auto time adjust OFF
Auto time adjust ON
. . . .Corrects the date/time automatically. The setting is completed.
When the time cannot be corrected automatically such as when “
” is
displayed and the date/time has not been set, the Manual Time Setting
display appears. Follow step 2 to set the date/time.
Auto time adjust OFF
. . . .Sets the date/time manually.
When “Notice call cost” is set to “ON”, you need to enter your Terminal Security
Code.
Enter year, month, date and time.
Use Mo to move the cursor and enter numbers by the
numeric keys.
To enter one-digit numeral for the date and time, enter
two digits beginning with “0” as in “01” through “09”.
Highlight “Time zone” and press l(
) to set the
time zone. Use Mo to select a region and press Oo(
).
About date/time correction function
This function corrects the time of the FOMA terminal according to the clock information
obtained from the network when you turn on the power.
The time is corrected when you show the Stand-by display with “Auto time adjust ON”
set.
If the time is not corrected for a while after you turn on the power, turn it off and then on
again.
Some few second errors might occur. You might not be able to correct the time depending
on the radio wave conditions, or the i-αppli program set for the i-αppli Stand-by display.
When you receive the clock information overseas and the time difference correction
information differs from the previously received one, “Time is adjusted” is displayed and
the time difference is corrected automatically. Press “OK” to update the time and show
Redial, Dialed Calls, Received Calls, sent/received mail messages and others in local
time.
Depending on the overseas carrier, the time difference might not be correctly adjusted.
In such a case, set a time zone manually.
Information
Unless Set Time is set, the functions which use the clock such as Schedule do not
work correctly. Further, the date/time for redial items and received call records are not
stored.
The set time is retained even when the battery pack is replaced, however, it might be
reset if the battery pack is left removed for a long time. In that case, charge the FOMA
terminal and then perform the clock setting.
When “Time zone” is set to other than “GMT +9” or the time difference is corrected
overseas, the sub clock (Japanese date/time, etc.) is displayed on the Stand-by
display.
This function supports clock settings from 00:00 on January 1, 2009 through 23:59 on
December 31, 2037.
45
Before Using the Handset
When an unset function is found, the Initial Setting display for the unset function
appears each time you turn on the power.
The completed settings are valid even when total setting is interrupted by an incoming
call or canceled by pressing -h or -r midway.
When the power is automatically turned on by alarm notification, the Initial Setting
display does not appear even if there is any unset function.
When you finish the initial settings, the confirmation display appears telling that
updating software is executed automatically. This display appears only at the first
time, and after that, does not appear until you execute Reset Settings or Initialize.
Before Using the Handset
Displaying World Time
You can display the time of the specified area on the Stand-by display.
m!Set./Service!Clock!World time watch
!ON or OFF
!Use Mo to select an area and press Oo(
m!Set./Service!NW services!Caller ID notification
!Do the following operations.
Activate/Deactivate !Activate or Deactivate
).
Information
World Time Watch does not appear when “Display setting” → “Clock” → “Stand-by
clock” → “Position” is set to “OFF”, or when you use the FOMA terminal overseas.
Summer Time
You can advance the time displayed for the overseas country you stay
and for a region of World Time Watch by one hour.
m!Set./Service!Clock!Summer time!ON or OFF
Check setting
“Activate/Deactivate” of “Caller ID notification” is also valid for making a PushTalk call.
+m-0
Checking Your Own Phone Number
Your phone number (own number) is stored on the UIM.
m!Phonebook!Own number
You can press No to switch the tabs.
See page 405 for storing/displaying personal data.
List tab
Phone number tab
Notifying the Other Party of Your Phone
Number
You can set the FOMA terminal to send your phone number to the called
party’s phone when dialing. Your phone number is important
information, so take utmost care when notifying your phone number.
This function is available only when the other party’s phone supports
Caller ID.
You can check the setting contents of “Activate/Deactivate”.
Information
46
+m-1-7
Set Caller ID Notification to Network
You can set whether to notify your caller ID on the network.
Own Number display
Information
In Dual Mode of 2in1, you can switch between Number A and Number B by pressing
*Oo(
) from the Own Number display. “
” appears for Number A, and “
”
appears for Number B.
When you replace a UIM with another one while using 2in1, 2in1 Setting is
deactivated. For using 2in1, activate 2in1 Setting.
Voice/Videophone Calls/PushTalk
Making Calls/Videophone Calls
Videophone Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Making a Call/Videophone Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Switching a Voice/Videophone Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using Call Records. . . . . . . . .
Using Chaku-moji . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting Caller ID to Send/Not to Send for Each Call . . . . . . . . . <186/184>
Sending Touch-tone Signals . . . . . . . . . . . . . . . . . . . . . . . . . .
Making International Calls . . . . . . . . . . . . . . . . . . . . . . . . .
Setting for International Calls . . . . . . . . . . . . .
Storing Numbers to be Added to the Beginning of a Phone Number
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Making a Call Specifying a Sub-address . . . . . . .
Setting Alarm for Reconnecting . . . . . . . . . . . . . . . . .
Making Voice Clear According to Surrounding Noise . . .
Reducing Surrounding Noise to Make Voice Clear . . .
Slowing Down the Other Party’s Speaking Speed . . . . . . .
Switching to Hands-free. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using Hands-free Compatible Devices. . . . . . . . . . . .
48
48
51
52
54
56
57
58
59
60
60
60
61
61
61
61
61
Receiving Calls/Videophone Calls
Receiving a Call/Videophone Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Switched between a Call and a Videophone Call by the Other Party . . .
Setting Response of Key Operation for Answering Incoming Calls
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting Response for when Opening FOMA Terminal while Ringing
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting Response for when Closing FOMA Terminal during a Call
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adjusting Earpiece Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adjusting Ring Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . .
62
64
64
65
65
66
66
When You cannot/could not Answer a Voice/Videophone Call
Putting a Call on Hold when You cannot Answer Immediately
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Putting a Call on Hold during a Call . . . . . . . . . . . . . . . . . . . . . .
Setting Hold Tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
67
67
67
Using Public Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
When You could not Answer an Incoming Call . . . . . . . .
Recording Voice/Video Messages when You cannot Answer a Call
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Recording a Message when You cannot Answer an Incoming Call
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Playing/Erasing Record Messages/a Voice Memo/Videophone Record
Messages/Movie Memos
. . . . . . . . . .
68
69
69
70
71
Making Full Use of Videophone Calls
Using Chara-den . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Useful Functions for Videophone Calls. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting Hands-free Videophone . . . . . . . .
Setting Image Quality for Videophone Calls . . . . . . .
Changing Image Displays for Videophone Calls . . . . . . .
Redialing as a Voice Call when a Videophone Call cannot be Connected
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting for Switching a Voice/Videophone Call during a Call
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Selecting Response to Incoming Videophone Calls during i-mode
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using Videophone Calls by Interfacing to External Devices . . . . . . . . . . .
Checking inside of a Room when You are Out . . . .
72
73
75
75
75
76
76
76
77
77
PushTalk
PushTalk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Making a PushTalk Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adding a Member during a PushTalk Call . . . . . . . . . . . . . . . . . . . . . . . . . .
Receiving a PushTalk Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adding Entries to PushTalk Phonebook
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Making a Call from PushTalk Phonebook . . . . . . . . . . . . . . . . . . . . . . . . . .
Deleting PushTalk Phonebook Entries
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting for Making/Receiving a PushTalk Call . . . . . . . . . . . . . . . . . . . . . .
79
79
81
82
83
84
85
86
47
Videophone Calls
Making a Call/Videophone Call
Voice/Videophone Calls/PushTalk
You and the other party can talk viewing each other’s images.
DOCOMO videophones conform to 3G-324M, standardized by the international
standard 3GPP. You cannot connect to the videophone that uses a different format.
3GPP (3rd Generation Partnership Project):
This is the regional standards organization for developing common technical
specifications for third-generation mobile telecommunication systems (IMT-2000).
3G-324M:
This is the international standard for the third generation of mobile videophones.
P-08A supports only 64 kbps communication speed of the videophone.
You cannot talk on the videophone at 32 kbps communication speed.
■Display during videophone calls
7…Received image (The other party’s image through the
camera or substitute image)
…Sent image (Image through your camera or substitute
image)
(…Call duration
*…Status
: Voice sending/receiving
(gray): Voice sending/
receiving failed※1
: Image sending/receiving
(gray): Image sending/
receiving failed※2
: Camera image sending
: Still image sending
: Chara-den talking
Enter the other party’s phone number,
starting with the city code.
When 27 or more digits are entered, the lower 26 digits
only are displayed.
To store an entered phone number in the Phonebook,
press m(
). Go to step 2 on page 92.
Even when you are dialing within the same area, you
need to enter the city code before the phone number.
When Making a Voice Call
Press d or Oo(
“
: Portrait
: Close-up
: Landscape
: Night Mode
: Chara-den Whole
Action Mode
: Chara-den Parts Action
Mode
: DTMF Transmission
Mode
: Hands-free activated
: AV output
: Bluetooth
communicating
※1 When voice sending fails, the other party cannot hear your voice.
When voice receiving fails, you cannot hear the other party’s voice.
※2 When image sending fails, the sent image is not displayed at the other end.
When image receiving fails, the received image is not displayed.
When voice or image sending/receiving fails, it does not recover automatically. You need
to make a videophone call again.
48
).
” blinks during dialing, and lights during a call.
Information
When Making a Videophone Call
Press l(
).
“ ” blinks during dialing and lights during the call.
Press m during a videophone call to switch between
the image through your camera and substitute image
for sending to the other party.
The digital communication
charging starts from this
display.
Press h to end the call after talking.
Information
If you hear the guidance requesting your caller ID (see page 438), follow the steps of
“To notify your caller ID” on page 57 to enter “186” and redial.
When an earphone/microphone (option) is connected, you can hear the other party’s
voice from the earphone. (See page 410)
If you close the FOMA terminal during a call, the FOMA terminal works in accordance
with the setting of “Setting when closed”. (See page 65)
You can press numeric keys to send touch-tone signals during a call. During a
Chara-den call, you need to switch to DTMF Transmission Mode. (See page 74)
In Dual Mode of 2in1, you can make a call after selecting Number A or Number B.
(See page 444)
You can make a voice call also by pressing -d and then entering the party’s phone
Display when dialing
The other party’s name and icon are displayed if the party’s phone number and name
are stored in the Phonebook. However, the image is not displayed even if it is stored in
the Phonebook.
If the same phone number is stored with multiple names in the Phonebook, the name
that comes first in the search order (see page 94) is displayed.
The phone number instead of the name is displayed when you make a call during
Personal Data Lock or to the party stored as secret data in the Phonebook.
If you entered a wrong phone number
Each time you press r, the digit on the far right is cleared. If you press and hold r
for at least one second, all the digits are cleared and the Stand-by display returns.
Press No to move the cursor to the digit you want to clear, and then press r to clear
it. To clear all the digits on and to the right of the cursor, press and hold r for at least
one second.
number. If you enter a wrong number, press -h to clear the display and then redial.
49
Voice/Videophone Calls/PushTalk
Just after purchase, Hands-free is automatically activated by “Hands-free
w/ V. phone”. (See page 75) However, Hands-free is deactivated during Manner
Mode regardless of “Hands-free w/ V. phone”.
When you make a videophone call with substitute image, note that you will still be
charged for the digital communication, not the voice calls.
If you make a videophone call at 110/119/118 from the FOMA terminal, it is
automatically dialed out as a voice call.
During a videophone call, you can send a Chara-den image to the other party instead
of the image through your camera. (See page 72)
The international videophone call is available using the DOCOMO international call
service “WORLD CALL”. (See page 58)
If a videophone call could not be connected
Voice/Videophone Calls/PushTalk
The reason why it could not be connected is displayed. (The displayed reason might not
be the same as the actual reason depending on the type of the other party’s phone and
contract for network services.)
Messages
Check number, then
redial
Busy
Busy with packet
transmission
Out of service area/power
off
Set caller ID to ON
Your call is being
forwarded
Redial using voice call
Reasons
You have dialed a non-existent phone number.
The other party is busy. (Depending on the receiver’s
phone, this message might be displayed during packet
communication as well.)
The packet communication is progress at the other end.
The other party’s phone is out of the service area or turned
off.
Your caller ID is not notified. (when dialing “visualnet”, etc.)
During forwarding
The other party activates Call Forwarding Service but the
forwarding destination phone does not support videophone
calls.
The upper limit for the plan with the limit function (Type
Limit, Family Wide Limit) is exceeded.
Upper limit has been
exceeded
Connection failed
Please make your call
You did not make a videophone call from the IP (Information
from the i-mode web page Provider) site among i-mode official sites (at dialing to
V-live).
Connection failed
Redial after setting “Activate/Deactivate” of “Caller ID
notification” to “Activate”.
This may appear in the case other than above.
50
Auto-redialing
If “Voice call auto redial” is set to “ON”, and a videophone call is not connected, a voice
call is automatically made.
Videophone calls cannot be connected to the phones that do not support the
videophone function, or to the phones that are out of the service area or turned off even
if they are videophones. If you have set “Voice call auto redial” to “ON” and attempt to
dial a phone that does not have the videophone function, the number will be redialed
as a voice call. However, this operation might not work if you call the phone connected
with ISDN-synchronous 64K or the ISDN videophone that does not support 3G-324M
(as of April 2009), or if you dial the wrong number. Note that you could be charged for
the communication.
Function Menu while Entering Phone Number
Notify caller ID
See page 56.
Prefix numbers
See page 60.
Int’l dial assist
See page 59.
Select image
See page 76.
Multi number
You can select a phone number to be notified to the other party.
(See page 441.)
Add to phonebook See page 92.
Compose message You can compose a mail message to send to the phone number
set as the destination address.
Go to step 3 on page 142.
Chaku-moji
See page 55.
Switching a Voice/Videophone Call
You (caller) can switch between a voice call and a videophone call. This
function is available for the mobile phones that can switch between a
voice call and a videophone call.
When the other party’s phone has a function to switch between the calls,
“
” is displayed on your phone and you can switch from the voice
call to videophone call.
During a voice call!c(
When you select an image
to be sent to the other
party, select “Select
image”. Go to step 2 on
page 76.
When “Cancel” is selected,
the FOMA terminal cancels
switching and returns to the
voice call.
While switching, the voice
guidance is played back.
)!Change
During a videophone call!i(
!CHG to voice call!YES
Select “NO” on the
confirmation display to stop
switching and to resume
the videophone call.
While switching, the voice
guidance is played back.
Information
You can switch between a voice call and a videophone call repeatedly.
When i-mode or packet communication is in progress, the communication is
disconnected and then the voice call is switched to the videophone call.
When packet communication is in progress at the other end, the message to the
effect that the communication cannot be switched is displayed and the voice call
continues without switching to the videophone call.
You cannot switch from a voice call to a videophone call while “Multi calling” is
displayed during a call if you have signed up for Call Waiting Service.
It takes about five seconds to switch. Switching may take a longer time depending on
the radio wave conditions.
Depending on how the caller’s phone is working or on the radio wave conditions, switching
between a voice call and a videophone call may fail and the connection may be cut off.
If you switch between a voice call and a videophone call during a call, the call duration
and call cost are counted respectively for each call. You are not charged while
“Changing” is displayed.
You cannot switch between a videophone call and a voice call unless “Notify
switchable mode” on page 76 is set to “Indication ON” at the other end.
When you switch from a videophone call to a voice call, Hands-free is deactivated.
51
Voice/Videophone Calls/PushTalk
Switch from a Voice Call to a Videophone Call
Switch from a Videophone Call to a Voice Call
When the other party’s phone has a function to switch between calls, you
can switch from a videophone call to a voice call by selecting “CHG to
voice call” from the Function menu.
※
※
Received calls/missed calls of 64K data communication
Dialed calls of packet communication
Using Call Records
Voice/Videophone Calls/PushTalk
Received calls/missed calls of packet communication
The FOMA terminal can store the other party’s phone number and date/
time you have dialed or received. You can call back to the other party.
Received calls of 64K data communication and packet
communication when no external device is connected
■Redial
Up to 30 records of dialed voice calls, videophone calls and PushTalk calls are stored in
total, and the older record of dialing to the same phone number is deleted. However, the
dialing by PushTalk is retained in Redial separately from that of the voice call or
videophone call even if you dial to the same phone number.
Received Chaku-moji message
■Dialed Calls
Up to 30 records of dialed voice calls, videophone calls and PushTalk calls are stored in
total, and up to 30 records of 64K data and packet communications are stored in total as
well. The older records of dialing to the same phone number are also retained.
■Received Calls
Up to 30 records of incoming voice calls, videophone calls and PushTalk calls are stored
in total, and up to 30 records of 64K data and packet communications are stored in total
as well. The older records coming from the same phone number are also retained.
When a call is switched between a voice call and a videophone call, the call of the type
that is dialed/received first is stored.
When more than 30 calls are dialed, the older records are automatically deleted. Even
if you turn off the FOMA terminal, call records are not deleted.
When you use 2in1, up to 30 records for Number A and up to 30 records for Number B
are stored respectively regardless of the mode.
Records with time difference corrected
Records for Number B (only in Dual Mode of 2in1)
※ The unchecked missed call icons are highlighted.
Use Redial/Dialed Calls
When Using Dialed Calls
m!Phonebook!Dialed/recv. calls
!Dialed calls
The list for call records is displayed.
For Redial
For redial items of PushTalk, press Oo(
) to
show the Redial list of the group. Highlight a party and press p to make a
PushTalk call. If you do not highlight any party and press p, you can make a
group call.
Press m(
) to display the Sent Address list.
■Icons for Redial, Dialed Calls, and Received Calls
※
Dialed and received calls/missed calls of voice call
※
Dialed and received calls/missed calls of videophone call
※
Dialed and received calls/missed calls of PushTalk
※
Dialed and received group calls/missed group calls of PushTalk
※
Dialed and received calls/missed calls of PushTalk via server’s
phonebook
Voice/Video messages are recorded on Record Message
Incoming calls of Remote Monitoring
※
Dialed and received calls/missed calls of international call
※
Dialed and received calls/missed calls of international videophone
call
Dialed calls of 64K data communication
52
When Using Redial
Press Vo.
Select a call record.
The detailed display for the call record is displayed.
When the other party is stored in the Phonebook, the
phone number, name, and icon are displayed. If the
same phone number is stored with multiple names in
the Phonebook, the name and icon that come first in the
search order (see page 94) are displayed.
For Redial
Use Received Calls
Press Co.
Select a received call record.
The other party’s phone number is displayed if it is
provided. If that phone number is not stored in the
Phonebook but recorded as a voice call in Redial,
“Callback” is displayed.
If this caller is stored in the Phonebook, the phone
number, name, and icon are displayed.
Detailed Received
If the same phone number is stored with multiple names
Call display
in the Phonebook, the name and icon that come first in
search order
(see page 94) are displayed. If there is a call for packet communication, the
sender’s access point name (APN) is displayed.
When the other party’s phone number is not notified, the reason for no caller ID is
displayed.
For missed calls, the ring time is displayed on the right of the received date/time.
When a Chaku-moji message is received, it is displayed.
Function Menu while Redial/Dialed Calls/Received Calls is Displayed
Notify caller ID
See page 56.
Prefix numbers
See page 60.
Int’l dial assist
See page 59.
Select image
See page 76.
2in1 dial
You can select a phone number to be notified to the other
party in Dual Mode of 2in1. (See page 444)
Multi number
You can select a phone number to notify the other party. (See
page 441)
Chaku-moji
See page 55.
Search location
You can access the site of “イマドコかんたんサーチ
(imadoco kantan search)”.
!YES
Add to phonebook
See page 92.
You can store the phone number in the Phonebook also by
pressing m(
) from the detailed display. Go to
step 2 on page 92.
To make a call to a displayed redial item, dialed call record, or
received call record
Press d to make a voice call. You can make a voice call also by pressing
Oo(
) from the detailed display. Press l(
) to make a videophone call
and press p to make a PushTalk call.
Add to PushTalk
53
Voice/Videophone Calls/PushTalk
You can display the Received Call list also by
m!Phonebook!Dialed/recv. calls!Received calls
!All calls or Missed calls.
All calls . . . . . . All the records including missed calls
Missed calls. . . The records of missed calls only
In Dual Mode of 2in1, the number of missed calls for
Received Call list
Number A and Number B is displayed respectively.
(If unchecked missed calls are found, the number of them is displayed.)
For received call records of PushTalk, press Oo(
) to show the Received
Call list of the group with “★” mark added to the caller. Highlight a party and
press p to make a PushTalk call. If you do not highlight any party and press p,
you can make a group call.
Press m(
) to display the Received Address list.
Information
You can make a voice call to the most recently dialed or received number by pressing
-d from the Stand-by display and then *No.
“Callback” is not displayed for incoming videophone calls and Pushtalk calls.
When you make/receive a call with an additional number of Multi Number, the stored
name for the additional number is displayed below the phone number on the detailed
display. If you store a phone number for “Number setting” of “Multi number”, the
phone number is displayed as well.
Dialed call records of 64K data communication are not stored when you use a
Bluetooth device.
Even if you make a voice call (or videophone call) to the phone number in a received
call record with a Chaku-moji message displayed, the received message is not sent.
When a call comes in from a party who uses a dial-in phone number, a different
phone number might be displayed.
Store in P-Talk PB
!YES
Voice/Videophone Calls/PushTalk
Store P-Talk group !Select a group.
When members who are not stored in the PushTalk
Phonebook are found, the confirmation display appears
asking whether to store them.
!Enter a group name.
You can enter up to 16 full-pitch/32 half-pitch characters.
Mail
Compose message You can compose a mail message to send to the phone
number set as the destination address.
Go to step 3 on page 142.
Compose SMS
You can compose an SMS message to send to the phone
number set as the destination address.
Go to step 3 on page 185.
Ring time
You can display the ring time for missed calls. Even if you
[Received Call list only] have set “Missed calls display” of “Ring time” to “Not display”,
the missed calls which stopped ringing within the ring start
time and their ring times are displayed.
Change font size
Set desktop/
You can switch font sizes for Redial, Dialed Calls, Received
Calls, Sent Address, and Received Address. (See “Dialed/
recv. calls” on page 118)
key
Add desktop icon
See page 31.
long press set. See page 404.
Sent address
See page 169.
[Redial/Dialed Calls only]
Received address
[Received Calls only]
See page 169.
Delete
Delete this
54
!YES
Delete selected
!Put a check mark for redial items, dialed call records, or
received call records to be deleted!l(
)!YES
Delete all
!Enter your Terminal Security Code!YES
Information
You cannot store from the call record for the party who is not stored in the Phonebook.
You cannot store in a PushTalk group unless all the members are stored in the FOMA
terminal’s Phonebook.
If you execute “Delete all” from the Function menu of Redial/Dialed Calls, all records
in both Redial and Dialed Calls are deleted. Even if you execute “Delete this” or
“Delete selected” of Redial, the records are not deleted from Dialed Calls and they are
retained. To delete the dialed call records, delete them from the Function menu while
“Dialed calls” is displayed.
Using Chaku-moji
When making a voice call or videophone call, you can send your text
message to tell the subject during calling.
For details on Chaku-moji or compatible models, refer to DOCOMO website or “Mobile
Phone User’s Guide [Network Services]”.
The sending end is charged, but the receiving end is not charged.
When a message is received
A Chaku-moji message is displayed below a caller. The
Chaku-moji message is stored in Received Calls as well.
The Chaku-moji message is displayed only during ringing. It
is not displayed during a call.
Even when a Chaku-moji message comes in within the ring
start time set by “Ring time”, it is received and recorded in
Received Calls.
The Chaku-moji message is not displayed during Lock All, Omakase Lock, or Personal
Data Lock. However, you can check the Chaku-moji message from Received Calls
after the lock is released.
Information
Store Messages
You can store up to 10 Chaku-moji messages in the Message list.
To edit a stored message, highlight it and press l(
).
You can enter up to 10 characters regardless of whether they are pictograms,
symbols, or full-pitch/half-pitch characters.
Make a Call with a Message
Enter a phone number
or
call up the detailed display of a Phonebook entry, redial
item, dialed call record, or received call record.
i(
)!Chaku-moji!Do the following operations.
Create message
You can create a Chaku-moji message just before dialing.
!Enter a message.
You can enter up to 10 characters regardless of whether they
are pictograms, symbols, or full-pitch/half-pitch characters.
The Chaku-moji message created using this function is not
stored in the Message list.
Select message
From the Message list, you can select a stored message.
!Select a message.
Sent messages
From the Sent Message list, you can select a Chaku-moji
message to be sent. Up to 10 sent Chaku-moji messages only
are stored in the Sent Message list. If you send the same
Chaku-moji message, the older one also remains. When the
number of sent Chaku-moji messages exceeds 10, the
messages are deleted from the oldest one.
!Select a sent message.
Press d or Oo(
).
Press l(
) to make a videophone call.
The Chaku-moji message being sent is displayed while you are dialing.
Sent Messages
Up to 10 sent Chaku-moji messages are stored in Sent Messages, and
you can check for the other party’s phone number and the date/time the
Chaku-moji messages were sent. Older messages sent to the same
phone number are also retained.
In Dual Mode of 2in1, up to 10 latest records for Number A and Number B can be
displayed in total.
m!Set./Service!NW services
!Chaku-moji!Sent messages
. . . . Chaku-moji message successfully sent
. . . . Chaku-moji message unsuccessfully sent
. . . . . . . Chaku-moji message for Number B (only in Dual Mode of 2in1)
When the transmission result is not displayed, “
” or “
” is not
displayed.
Depending on the radio wave conditions, the transmission result might not be
displayed correctly.
55
Voice/Videophone Calls/PushTalk
m!Set./Service!NW services!Chaku-moji
!Create message
!Highlight and press l(
!Enter a message.
When a Chaku-moji message has arrived at the other party’s phone, “Transmission
completed” is displayed, and you are charged a transmission fee.
When a Chaku-moji message does not arrive at the other party’s phone such as when
the other party’s phone is not a Chaku-moji compatible mobile phone or the call is not
allowed by “Message disp. settings” at the receiving end, “Transmission failed” is
displayed. In this case, you are not charged a transmission fee.
Depending on the radio wave conditions, the transmission result may not be
displayed at the sending end even if a Chaku-moji message has arrived at the other
party’s phone. In this case, you are charged a transmission fee.
Even if you make a call sending a Chaku-moji message, the Chaku-moji message is
not displayed and you are not charged a transmission fee (the call is not recorded in
Received Calls at the receiving end) when the other party’s phone is out of the service
area, turned off, during Public mode (Drive mode), or the ring time for Record
Message Setting is set to 0 seconds. Also, the transmission result is not displayed at
the sending end.
When a videophone call is not connected and automatically dialed as a voice call, the
Chaku-moji message is resent as well.
Chaku-moji does not support PushTalk.
You cannot send/receive Chaku-moji messages overseas.
Voice/Videophone Calls/PushTalk
Select a sent message.
When the other party’s phone number is stored in the
Phonebook, the phone number, name, and icon are
displayed.
Prefer Chaku-moji
You can set how your FOMA terminal works for incoming Chaku-moji
messages for when “Setting when opened” is set to “Answer”.
ON . . . . Does not answer by opening the FOMA terminal during ringing, so you
can check a Chaku-moji message.
OFF . . . Answers by opening the FOMA terminal while it is ringing.
Function Menu while “Sent Messages” is Displayed
Store
You can store a sent Chaku-moji message in the Message list.
!
You can store also by pressing l(
).
Delete this
!YES
Delete all
!Enter your Terminal Security Code!YES
Message Display Settings
You can set how incoming Chaku-moji messages are displayed.
m!Set./Service!NW services!Chaku-moji
!Message disp. settings!Select an item.
Display all messages . . . .Displays Chaku-moji messages from all callers.
Numbers stored in PB . . .Displays Chaku-moji messages only from the callers
stored in the Phonebook.
Calls with callerID . . . . . . .Displays Chaku-moji messages only from the caller
notifying his/her phone number.
Hide all messages. . . . . . .Does not display Chaku-moji messages.
Information
When you set to “Numbers stored in PB”, you cannot receive Chaku-moji messages
from the callers stored in the Phonebook B in A Mode of 2in1 (and vice versa).
56
m!Set./Service!NW services!Chaku-moji
!Prefer Chaku-moji!ON or OFF
<186/184>
Setting Caller ID to Send/Not to Send for
Each Call
Set Caller ID Notification when Making a Call
Each time you dial out, you can set whether to notify your caller ID.
Enter a phone number
or
call up the detailed display of a Phonebook entry, redial
item, dialed call record, or received call record.
i(
)!Notify caller ID
!Don’t notify or Notify caller
To release “Notify caller ID”, select “Cancel prefix”. Whether to notify or not
follows the setting for “Activate/Deactivate” of “Caller ID notification”.
Set “Notify/Not Notify” by Entering “186/184”
You can select whether to notify the other party of your phone number
also by entering “186”/“184” before the other party’s phone number.
To notify your caller ID
186→Destination phone number!d or Oo(
Press l(
) to make a videophone call.
Press l(
) to make a videophone call.
Information
When you make a call and hear the guidance requesting your caller ID (see
page 438), follow the steps of “To notify your caller ID” to enter “186” and redial.
When you make a PushTalk call, “Notify caller ID” is valid, but “notify/not notify” by
adding “186”/ “184” is invalid.
You cannot set “Caller ID notification” while “
” is displayed.
Store Pause Dial
m!Set./Service!Other settings!Pause dial
!l(
When a number string is already stored, it is displayed.
To delete a stored pause dial, press i(
) and select “Delete”, then select
“YES”.
!Oo(
!d or Oo(
)!Enter a phone number
A voice call is made. Once the line is connected, a number string stored in Pause
Dial is displayed up to the first pause (p).
When the other party’s phone number is stored in the Phonebook, you can
retrieve it selecting from the Search Phonebook display by pressing Bo.
You can search for the phone number also from Received Calls by pressing Co
or from Redial by pressing Vo.
Sending Touch-tone Signals
You need to store a number string to be sent as a touch-tone signal in the
Pause Dial list. If you have inserted a pause (p), you can send a number
string breaking at the point where the pause is inserted.
Enter the pause (p) by pressing and holding a for at least one second.
You can use only 0 through 9, s, a to enter a number string and the
pause (p).
You can enter up to 128 digits.
You cannot enter a pause (p) at the beginning and end of a number string, or
enter it consecutively.
Send Pause Dial
m!Set./Service!Other settings!Pause dial
+m-8-4
You can send touch-tone signals from your FOMA terminal to use
services such as reserving tickets, checking bank balance, etc.
Enter a number string.
Check that the line is connected!d or Oo(
A number string up to the first pause (p) is sent, and a number string up to the next
pause (p) is displayed.
A number string up to the pause (p) is sent each time you press d or
Oo(
).
When you have finished sending the last number, the “Talking” display appears.
To send multiple pieces of a number string at a time, press and hold Vo for at
least one second, and select “Send at one time”.
Information
During a call, you can send a number string also by displaying the Function menu of
the Pause Dial display.
Some devices on the receiving end cannot receive signals.
You cannot send a number string with pauses during a videophone call.
57
Voice/Videophone Calls/PushTalk
Not to notify your caller ID
184→Destination phone number!d or Oo(
Voice/Videophone Calls/PushTalk
Making International Calls
WORLD CALL is the international call service available from DOCOMO
mobile phones.
When you have signed up for FOMA service, you have contracted to use
“WORLD CALL” (except those who have applied not to use it).
You can make calls to about 240 countries and regions.
The WORLD CALL charges are added to your monthly bill for FOMA service.
The application/monthly fee is free of charge.
The service is not available with some billing plans.
Contact “docomo Information Center” on the back page of this manual for inquiries
about WORLD CALL.
When using international carriers other than DOCOMO, contact them.
The caller ID might not be notified, or might not be displayed correctly depending on
the carrier. In this case, you cannot make a call by using Received Calls.
Use “+” to Make an International Call
When you enter a phone number for dialing or storing it in the
Phonebook, press and hold 0 for at least one second to enter “+”. You
can use “+” to make international calls without entering an international
call access code.
If you set “Auto assist setting” of “Int’l dial assist” to “ON”, an international call access
code of “IDD prefix setting” is automatically entered.
When the area code (city code) begins with “0”, enter it except for the “0”. However,
include “0” when making a call to some countries or regions such as Italy.
Press l(
) to make an international videophone call.
When you select “Dial with orig. No.”, you can make a call without adding an
international call access code.
About international videophone calls
You can make international videophone calls to users of the specified 3G mobile phone
carriers overseas and FOMA users. Press l(
) instead of d or Oo(
in the steps of “Enter a Phone Number to Make an International Call”. (See page 58)
For the information about connectable countries and telecommunications carriers, refer
to “Mobile Phone User’s Guide [International Services]” or the DOCOMO Global
Service website.
Images sent from the other party may blur on your FOMA terminal or you may not be
able to connect, depending on the other party’s phone used for the international
videophone call.
58
0(for at least one second)
!Enter numbers in order of country/area code
→area code (city code)→destination phone number
!d or Oo(
)!Dial
Enter a Phone Number to Make an International Call
Enter numbers in order of 010→country/area code
→area code (city code)→destination phone number
!d or Oo(
You can make an international call also by entering 009130→010
→country/area code→area code (city code)→destination phone number.
When the area code (city code) begins with “0”, enter it except for the “0”. However,
include “0” when making a call to some countries or regions such as Italy.
Press l(
) to make an international videophone call.
International Dial Assist
You can make a call adding a country/area code or international call
access code to a phone number. (Except for some countries and regions,
if the phone number starts with “0”, the “0” at the beginning is
automatically deleted.)
Enter a phone number
or
call up the detailed display of a Phonebook entry, redial
item, dialed call record, or received call record.
i(
)!Int’l dial assist
!Select a country/area name
!Select a name of International call access code
!d or Oo(
Press l(
) to make an international videophone call.
When the beginning of the phone number is “+”, the display for selecting a
country/area name is not displayed.
When “Japan” is selected as a country/area name, the display for selecting a
name of International call access code is not displayed.
m!Set./Service!Network setting!Int’l dial assist
!Country/Area Code
!Highlight and press l(
).
Enter a country/area name !Enter a country/area code.
If you select a stored country/area name, you can check the stored contents.
IDD Prefix Setting
You can store up to three international call access codes to be added to
the beginning of a phone number for making an international call.
m!Set./Service!Network setting!Int’l dial assist
!IDD prefix setting
!Highlight and press l(
).
Enter a name!Enter an international call access code.
Setting for International Calls
Auto Assist Setting
You can set whether to replace “+” at the beginning of a phone number
with an international call access code for when you make an international
call from Japan.
m!Set./Service!Network setting!Int’l dial assist
!Auto assist setting!ON or OFF
!Select a country/area name
!Select a name of International call access code.
When no country/area code or international call access code is stored, the
confirmation display appears asking whether to store it. Select “YES” and go to
step 2 of “Country/Area Code” on page 59 for a country/area code, and go to
step 2 of “IDD Prefix Setting” on page 59 for an international call access code.
You can enter a country/area name of up to 8 full-pitch/16 half-pitch characters.
You can enter a country/area code of up to 5 digits. But you cannot use #, :, and
+.
If you select the stored item, you can check the stored contents.
You can enter a name of up to 8 full-pitch/16 half-pitch characters.
You can enter an international call access code of up to 16 digits.
Function Menu while Country/Area Code /IDD Prefix
Setting is Displayed
Edit
Go to step 2 of “Country/Area Code” on page 59 for Country/Area
Code, and go to step 2 of “IDD Prefix Setting” on page 59 for IDD
Prefix Setting.
You can edit the item also by pressing l(
).
Delete this
!YES
59
Voice/Videophone Calls/PushTalk
Country/Area Code
You can store up to 27 country/area codes to be added for making
international calls from overseas.
Delete all
!Enter your Terminal Security Code!YES
Information
)!Prefix numbers!Select a name
Press l(
) to make a videophone call and press p to make a PushTalk
call.
For making a PushTalk call, adding a prefix number such as “186” or “184” to the
beginning of the phone number is disabled.
You cannot delete the country/area code or international call access code set by
“Auto assist setting”.
Voice/Videophone Calls/PushTalk
i(
!d or Oo(
Storing Numbers to be Added to the
Beginning of a Phone Number
You can store prefix numbers such as international call access codes or
“186”/“184” and add them to the phone number for dialing. You can store
up to seven prefix numbers.
m!Set./Service!Network setting!Prefix setting
!Highlight and press l(
).
If you select a stored prefix, you can check the stored contents.
To delete a stored prefix, press i(
) and select “Delete this” or “Delete
all” then select “YES”. If you select “Delete all”, you need to enter your Terminal
Security Code.
Enter a name!Enter a prefix number.
You can enter a name of up to 8 full-pitch/16 half-pitch characters.
You can enter a prefix number of up to 16 digits. The keys for entry are limited to
0 through 9, s and a.
Prefix Numbers
You can add a prefix number to the beginning of phone number when
you make a call.
60
Enter a phone number
or
call up the detailed display of a Phonebook entry, redial
item, dialed call record, or received call record.
Making a Call Specifying a Sub-address
You can set whether to regard the numbers after “:” of a phone number
as a sub-address to access the specified phones or data terminals.
The sub-address is a number assigned to identify each ISDN terminal connected to an
ISDN line. It is also used for selecting contents on “V-live”.
m!Set./Service!Other settings
!Sub-address setting!ON or OFF
Information
Even if you set “Sub-address setting” to “ON”, “:” at the top of phone numbers and
“:” immediately after the prefix number or “186”/“184” are not regarded as
sub-address mark-off symbols.
+m-7-7
Setting Alarm for Reconnecting
You can set an alarm that sounds until a voice call, videophone call, or
PushTalk communication is reconnected after disconnected owing to
bad radio wave conditions.
m!Set./Service!Talk!Reconnect signal
!Select an alarm.
Information
The reconnectable time differs depending on the usage status and radio wave conditions.
An estimate is about 10 seconds and the call charge is applied also for that duration.
While you are disconnected, no sound is transmitted to the other party.
Making Voice Clear According to
Surrounding Noise
The volume of the other party’s voice is turned up according to the
surrounding noise during a call. This setting is effective only when the
other party’s voice is output from the earpiece.
m!Set./Service!Talk!Shikkari Talk!ON or OFF
Reducing Surrounding Noise to Make
Voice Clear
The noise sent to the other party is reduced according to the surrounding
noise during a call.
m!Set./Service!Talk!Noise reduction!ON or OFF
Slowing Down the Other Party’s Speaking
Speed
When Hands-free is activated, “
” is displayed.
Press d again to deactivate Hands-free.
The sound volume during a Hands-free call follows the setting specified by
“Volume” (earpiece volume).
You can switch to Hands-free even during Manner Mode. Also, you will still hear
voice through the speaker even when you activate Manner Mode during a
Hands-free call.
Information
+m-7-6
During a call, dialing, or connecting!d
During a voice call!m(
While Yuttari Talk is activated, “
” is displayed.
Press m(
) again to return to the normal speed.
Information
Yuttari Talk is effective only during a current voice call. The speaking speed returns to
normal one when you end the call, switch calling parties during Multi calling, or switch
from the voice call to a videophone call.
While an earphone/microphone (option) is connected, you cannot hear voice through
the speaker even if you switch to Hands-free.
Keep the FOMA terminal well away from your ear during a Hands-free call. Otherwise
you could affect or damage your hearing.
Talk into the FOMA terminal within a distance of about 50 cm.
Using Hands-free Compatible Devices
You can make or receive voice calls from a Hands-free compatible device
such as In-Car Hands-Free Kit 01 (option) or a car navigation system by
connecting with your FOMA terminal.
You can connect your FOMA terminal to a Hands-free compatible device
using two ways of connections as follows:
Connect using a cable (USB connection):
To use/charge via the In-Car Hands-Free Kit 01 (option), you need to have the FOMA
In-Car Hands-Free Cable 01 (option).
Connect using Bluetooth (wireless):
To connect to a Bluetooth communication compatible Hands-free device, you need to
register and connect it to the FOMA terminal.
※For how to operate Hands-free compatible devices, refer to the respective instruction
manuals.
61
Voice/Videophone Calls/PushTalk
Switching to Hands-free
When you switch to Hands-free, sound such as the other party’s voice is
audible over the speaker.
Voice/Videophone Calls/PushTalk
Information
To connect using a cable (USB connection), set “USB mode setting” to
“Communication mode”.
“ ” appears while you are talking or communicating using a USB Hands-free
compatible device.
“ ” might appear while the FOMA terminal is connected to a USB Hands-free
compatible device, and “ ” while “USB mode setting” is set to “microSD mode”,
depending on the Hands-free device connected.
The display or ring tone for incoming calls follows the settings of the FOMA terminal.
When the sound is set to output from a Hands-free compatible device, the ring tone
sounds from that device even when Manner Mode is activated or “Ring volume” of the
FOMA terminal is set to “Silent”.
The receiving operation in Public mode (Drive mode) follows the setting of “Public
(Drive) mode”.
The receiving operation while Record Message is activated follows the setting of
“Record message setting”.
When the sound is set to output from the FOMA terminal, the operation for when the
FOMA terminal is closed during a call follows the setting of “Setting when closed”.
When the sound is set to output from a Hands-free device, the communication state
does not change regardless of “Setting when closed” even if you close the FOMA
terminal.
62
) to answer
You can send the image through your camera to the
other party.
When you press m(
) to answer the videophone
call, the substitute image is sent to the other party.
(Substitute image answering)
Press m during a videophone call to switch between
the image through your camera and substitute image
for sending to the other party.
When you receive a call, the ring tone
sounds and the Call/Charging indicator
flickers.
To vibrate the FOMA terminal for incoming calls, set
“Phone” or “Videophone” of “Vibrator” to other than
“OFF”.
While the phone is ringing for a videophone call,
“Incoming V.phone” is displayed. However, while
ringing for a voice call, this kind of indication is not
displayed.
“
” is displayed at the upper left of the phone
number for incoming international calls.
) to answer
For Answering a Videophone Call
Press d or Oo(
the videophone call.
Receiving a Call/Videophone Call
For Answering a Voice Call
Press d or Oo(
the call.
Press h to end the call after talking.
Information
If you close the FOMA terminal during a call, the FOMA terminal works in accordance
with the setting of “Setting when closed”. (See page 65)
Chaku-moji message
(See page 54)
Information
Display for incoming calls
When a caller’s phone number is provided
The phone number is displayed. If that phone number is not stored in the Phonebook but
recorded in Redial, “Callback” is displayed.
If the caller’s name, phone number, and image are stored in the Phonebook, the name,
phone number, and icon (or image) are displayed.
“Callback” is not displayed for incoming videophone calls and Pushtalk calls.
If the same phone number is stored with multiple names in the Phonebook, the name
that comes first in the search order (see page 94) is displayed.
The phone number but not the name is displayed during Personal Data Lock.
However, when “Phonebook available” is set to “Accept” for “Customize” of Personal
Data Lock, the name is displayed even during Personal Data Lock.
For a forwarded call, the forwarder’s phone number is displayed below the caller. (It
might not be displayed in the case of some forwarders.)
When you receive a call to an additional number of Multi Number, the stored name for
the additional number is displayed below the caller. (With a forwarded call, you can
press c(
) to switch to display of the forwarder.)
When a caller’s phone number is not provided
The reason for no caller ID is displayed. (See page 135)
Function Menu while a Call is Ringing
Call rejection
You can disconnect the call without answering.
Call forwarding
See page 437.
Voice mail
See page 434.
63
Voice/Videophone Calls/PushTalk
You might hear beeps (in-call ring tone) during a call.
If you have signed up for any of Voice Mail Service, Call Waiting Service, or Call
Forwarding Service and set “Arrival call act” to “Answer”, the beeps (in-call ring tone)
will sound for another incoming call, enabling you to do the following operations:
Voice Mail Service
. . . . Transfer the call to the Voice Mail Service Center. (See page 434)
Call Waiting Service
. . . . Put your current call on hold and answer the incoming call. (See page 434)
Call Forwarding Service
. . . . Transfer the call to the registered forwarding destination. (See page 437)
You can set “Reject unknown” not to accept calls from the phone numbers that are not
stored in the Phonebook.
Just after purchase, Hands-free is automatically activated during a videophone call as
“Hands-free w/ V. phone” has been set to “ON”. (See page 75) However, Hands-free
is deactivated during Manner Mode regardless of “Hands-free w/ V. phone”.
Even if Call Forwarding Service is set to “Activate”, the call is not forwarded unless the
forwarding destination is a phone compatible with the videophone conforming to
3G-324M (see page 48). Check the phone you are forwarding the call to and then
activate the service. The videophone caller does not hear the guidance to the effect
that the call is forwarded. (The message to the effect that the call is to be forwarded
appears, depending on the receiver’s FOMA terminal.)
If a videophone call comes in from the phone number to be rejected by Nuisance Call
Blocking Service, the video guidance for Call Rejection is played back and the call is
disconnected.
You can send a Chara-den image to the other party instead of the image through your
camera. (See page 72)
Switched between a Call and a
Videophone Call by the Other Party
Voice/Videophone Calls/PushTalk
When you have set “Notify switchable mode” to “Indication ON”, a caller
(the other party) can switch between a voice call and a videophone call.
You (receiving end) cannot switch between a voice call and a videophone call.
Switched from a Voice Call to Videophone Call by the
Other Party
The display for switching to a
videophone call appears during a voice
call.
YES . . . Sends the image through your camera to the
caller.
NO . . . . Sends a pre-installed substitute image to the
caller.
While switching, the message to that effect is displayed
and the voice guidance is played back.
Switched from a Videophone Call to Voice Call by the
Other Party
When the caller (the other party) switches a videophone call to a voice
call, the message telling that the call is being switched appears, the voice
guidance is played back, and then the call is switched to a voice call.
+m-5-8
Setting Response of Key Operation for
Answering Incoming Calls
You can set to start talking (Any key answer) or to stop the ring tone
(Quick silent) by pressing a key besides d, Oo, m (for videophone
call), or p (for PushTalk call) for when a call or PushTalk call comes in.
m!Set./Service!Incoming call!Answer setting
!Select a key operation.
Any key answer
You can start talking by pressing any key shown below:
Voice call※1※2
PushTalk call
d, Oo, 0 through 9, a, s, r, m, c※3, o
d, Oo, p, 0 through 9, a, r, l, c, Bo, <
When receiving a videophone call, you can start talking by pressing d, Oo or
m.
Quick silent
The following are the keys you can press to stop the ring tone, vibrator or voice
guidance:
When “Setting when opened” is set to “Keep ringing”, you can stop the ring tone,
vibrator or voice guidance also by opening the FOMA terminal. Even if you stop it,
the other party still hears a ringback tone.
Voice call※1※2
0 through 9, a, s, r, m, c※3, No, <
Videophone call※2 0 through 9, a, s, r, c※3, No, <
PushTalk call
0 through 9, a, r, l, c, Bo, <
After you stop the ring tone, vibrator or voice guidance, you can start talking by
pressing d, Oo, m (for videophone calls), or p (for PushTalk calls).
64
OFF
You can start talking by pressing a key shown below:
d, Oo
Videophone call
d, Oo, m
PushTalk call
d, Oo, p
※1 You can activate Any Key Answer or Quick Silent also by pressing l when
five record messages have already been recorded.
※2 During Key Lock, you can activate Any Key Answer and Quick Silent by
pressing and holding < for at least one second.
※3 While “
” is displayed, you cannot activate Any Key Answer or Quick
Silent by pressing c.
Setting Response for when Closing FOMA
Terminal during a Call
Set Response for when Closing FOMA Terminal during a
Voice Call/Videophone Call
m!Set./Service!Talk!Setting when closed
!Phone/Videophone!Select an item.
Continue . . . . . .The call is continued. The setting is completed.
Hold . . . . . . . . . .The other party hears the hold tone set for “Holding tone” of “Hold
tone setting”. For videophone calls, the still image set for
“Holding” of “Select image” is displayed.
End the call. . . .The call is finished. This is the same operation as pressing h
during a call. The setting is completed.
Information
While an earphone/microphone (option) is connected, you can press the switch to
start talking, regardless of “Answer setting”. (See page 411)
Setting Response for when Opening
FOMA Terminal while Ringing
m!Set./Service!Incoming call
!Setting when opened!Select an incoming type
!Keep ringing or Answer
Keep ringing. . .You can keep the incoming call ringing.
Answer . . . . . . .You can answer the incoming call. For videophone calls, the still
image set for “Substitute image” of “Select image” is sent to the
other party.
+m-1-8
Speaker ON or Speaker OFF
Speaker ON. . . . . The hold tone sounds from the speaker.
Speaker OFF. . . . The hold tone does not sound from the speaker.
Set Response for when Closing FOMA Terminal during
PushTalk
m!Set./Service!Talk!Setting when closed
!PushTalk!Speaker call or End the call
Information
This function is disabled when an earphone/microphone (option) is connected. The
communication state does not change even if you close the FOMA terminal.
65
Voice/Videophone Calls/PushTalk
Voice call
Adjusting Earpiece Volume
Voice/Videophone Calls/PushTalk
m!Set./Service!Talk!Volume!Use Bo or to
adjust the earpiece volume.
Adjust the earpiece volume to Level 1 (minimum) through Level 6 (maximum).
You can adjust the volume by pressing Zo or during a voice call and
calling, Bo or during a videophone call and PushTalk call, and by
pressing and holding Zo (for at least one second) while you are entering a
phone number. Press Bo or within two seconds to adjust it.
Information
The earpiece volume adjusted during a call is retained even after the call ends.
When you adjust the earpiece volume, the sound volume during a Hands-free call or
speaker call for PushTalk is also adjusted.
66
+m-5-0
Adjusting Ring Volume
You can adjust the ring volume for incoming calls and mail.
m!Set./Service!Sound!Ring volume
!Select an incoming type
!Use Bo to adjust the volume.
The following icons are displayed on the Stand-by display while “Ring volume” is
set to “Silent”:
: Set for “Phone”, “PushTalk”, or “Videophone”.
: Set for “Mail”, “Chat mail”, “MessageR”, “MessageF”, or “i-concier”.
: Set for “Phone”, “PushTalk”, or “Videophone”, and for “Mail”, “Chat mail”,
“MessageR”, “MessageF”, or “i-concier”.
If you have set “Step”, the ring tone is silent for about three seconds, and then the
volume steps up every three seconds, from Level 1 through Level 6.
While the phone is ringing for a voice call or videophone call, you can adjust the
ring volume by pressing Bo. However, you cannot adjust the ring volume in the
following cases:
・When “Ring volume” is set to “Step”
・When “Answer setting” is set to “Quick silent” and you stop the ring tone or
voice guidance
・During Manner Mode
・When a call is cut off within the ring start time specified by “Ring time”
2
Putting a Call on Hold when You cannot
Answer Immediately
Press d or Oo(
the call.
) to release hold and answer
If “Answer setting” is set to “Any key answer”, you can release hold of voice calls
by pressing any key of 0 through 9, a, s, r, m, c, Mo, <, >,
l, or i.
If a videophone call is on hold, the image through your camera is sent to the other
party by pressing d or Oo(
) to release hold. If you press m(
to release hold, the substitute image is sent.
Information
The caller is charged for the call even during answer-hold (On Hold).
If you press -h during answer-hold (On Hold), the call will be disconnected.
Putting a Call on Hold during a Call
When you have put a voice call on hold, you can release the hold also by
pressing r.
If a videophone call is on hold, the image through your camera is sent to the other
party by pressing d or Oo(
) to release hold. If you press m(
to release hold, the substitute image is sent.
You can release hold also by opening the FOMA terminal.
During ringing!h
The FOMA terminal makes three rapid beeps for confirmation and the call is put on
answer-hold (On Hold).
The confirmation tone does not sound during Manner Mode or when “Ring
volume” is “Silent”.
The other party hears the hold tone set for “On hold tone” of “Hold tone setting”.
For videophone calls, the still image set for “On hold” of “Select image” is
displayed.
During a call!Oo (
) to release hold and answer
Information
The caller is charged for the call even while the call is on hold.
If a new call comes in while the current call is put on hold, the hold (Holding) is
released.
Setting Hold Tone
You can set the guidance the other party hears while a call is put on hold.
m!Set./Service!Talk!Hold tone setting
!On hold tone or Holding tone!Select a hold tone.
Tone 1/2 . . The caller hears the pre-installed guidance in Japanese.
RHAPSODY ON A THEME OF
. . . . . . . . . . The caller hears the melody. You can set this for “Holding tone” only.
Voice announce
. . . . . . . . . . The caller hears the sound recorded by “Voice announce”. If it has
not been recorded, this is not displayed.
Press l(
) to play back a hold tone. Press r to end the demo
playback.
The other party hears the hold tone set for “Holding tone” of “Hold tone setting”.
For videophone calls, the still image set for “Holding” of “Select image” is
displayed.
You can put the call on hold by closing the FOMA terminal during the call if you
have set “Setting when closed” to “Hold”.
67
Voice/Videophone Calls/PushTalk
Press d or Oo(
the call.
Using Public Mode
Voice/Videophone Calls/PushTalk
Using Public Mode (Drive Mode)
Public mode is an auto-answer service that puts importance on manners
in public spaces. Once you activate Public mode, the guidance is played
back telling that you cannot answer the call as you are currently driving
or in a place where you should refrain from speaking on the phone (a
train, bus, movie theater, etc.). Then the call is disconnected.
Voice Mail Service※1, Call Forwarding Service※1, and Caller ID Display Request
Service※2 work taking priority over Public mode.
※1 If a ring time is set to other than 0 seconds for incoming calls, the service works
after the Public mode guidance.
※2 When the other party notifies you of the phone number, Public mode works.
Public mode does not work to the calls from the party set to be rejected by Nuisance
Call Blocking Service.
Press and hold a for at least one second.
Public mode is activated and “
” is displayed.
When a call comes in, the guidance “The person you are calling is currently driving
or in an area where cell phone should not be used. Please try again later.” is played
back for incoming calls.
To deactivate Public mode, perform the same operation. Then, Public mode is
deactivated and “
” disappears.
Information
You can activate/deactivate Public mode only from the Stand-by display. You can
activate/deactivate Public mode even when “
” is displayed.
You can make calls as usual even during Public mode.
If you make an emergency call at 110/119/118, Public mode is released.
When Public mode and Manner Mode are activated simultaneously, Public mode has
priority.
If a “User unset” call comes in while “Caller ID request” is set to “Activate”, the Caller
ID Request guidance is played back. (The Public mode guidance is not played back.)
You cannot use this function during data communication.
68
When Public mode (Drive mode) is activated
・Even when a call comes in, the ring tone does not sound. The “Missed call” icon
appears on the display and the call is stored in “Received calls”. The guidance is
played back to the caller to the effect that you are currently driving or in an area where
mobile phones should not be used. Then the call is disconnected. When a PushTalk
call comes in, no answer is made and the message “Connection failed” appears on the
caller’s display. For the talk among three or more members, the message to the effect
that you are driving is conveyed to them.
However, when the power is off or “
” is displayed, the caller hears the
out-of-service area guidance instead of the Public mode guidance.
・The ring tone does not sound and the Call/Charging indicator does not flicker even
when mail or a message comes in. In addition, the set vibrator does not work.
・The ring tone for 64K data communication, alarm tone, charging confirmation tone, the
ring tone for i-αppli call and effect tone at the start of i-Widget do not sound, and a
melody while an i-αppli program is running is not played back.
・The tickers of i-Channel are not displayed.
・See page 68 for how Public mode (Drive mode) and each network service work for
incoming calls when they are simultaneously activated.
Using Public Mode (Power Off)
Public mode (Power off) is an auto-answer service that puts importance
on manners in public spaces. Once you activate Public mode (Power off),
the guidance is played back telling that you cannot answer the call as
you are currently in a place where the power should be turnd off
(hospital, airplane, around priority seat in a train, etc.). Then the call is
disconnected.
Enter “:25251”!d
Public mode (Power off) is set. (Nothing is changed on the Stand-by display.)
After setting Public mode (Power off) and turning off the power, the guidance “The
person you are calling is currently in an area where use is prohibited. Please try
again later.” is played back for incoming calls.
To release Public mode (Power off), dial “:25250”.
To check the setting for Public mode (Power off), dial “:25259”.
When Public mode (Power off) is activated
When You could not Answer an Incoming
Call
When you could not answer calls (Missed calls), the “Notification icon”
appears on the Stand-by display. You can check Received Calls by
selecting the icon.
Oo!Oo(
Recording Voice/Video Messages when
You cannot Answer a Call
By activating Record Message, you can play back an answer message to
incoming calls and record callers’ voice/video messages when you
cannot answer them even if you have not signed up for Voice Mail
Service.
You can record up to five messages for voice calls and up to two
messages for videophone calls. Each message can be recorded for up to
20 seconds.
Activate Record Message
m!LifeKit!Rec. msg/voice memo
!Record message setting!ON or OFF
!Select an answer message.
Press l(
) to play back the answer message. Press r to end the
demo playback.
When “Japanese 1”, “Japanese 2”, or “English” is set, a beep sounds after
playing back the answer message to the other party. If “Voice announce” is set,
the beep does not sound.
Press h or r to return
to the former display.
When multiple icons are
found, use Mo to highlight
an icon and press
Oo(
).
Notification icon
+m-5-5
Enter a ring time (seconds).
Enter from “000” through “120” in three digits.
You cannot set the same ring time for Remote Monitoring, Auto Answer Setting
and Record Message Setting. Set a different time for each.
While Record Message is activated, “
”∼“
” (the number of recorded
messages for voice calls) and “
”∼“
” (the number of recorded messages
for videophone calls) are displayed.
69
Voice/Videophone Calls/PushTalk
The setting stays activated until you dial “:25250” to deactivate Public mode (Power
off). You cannot deactivate the setting just by turning on the power.
The guidance is played back to the caller telling that you are currently in a place where
you should turn off the power. Then the call is disconnected. When a PushTalk call
comes in, no answer is made and the message “Connection failed” appears on the
caller’s display. For the talk among three or more members, the message to the effect
that you do not participate is conveyed to them.
The Public mode (Power off) guidance is played back even when you are out of the
service area or out of reach of radio waves.
・See page 68 for how Public mode (Power off) and each network service work for
incoming calls when they are simultaneously activated.
Voice/Videophone Calls/PushTalk
Incoming calls when Record Message Setting is set to “ON”
The ring time
elapses
Incoming Call
Playing back the
answer message
Recording a voice/
video message
For videophone calls, the still image set for “Preparing” of
“Select image” is displayed on the other party’s display while
playing back the answer message, and the still image set for
“Record message” of “Select image” is displayed while
recording.
To answer a call while the answer message is being played
back or a voice/video message is being recorded, press
).
d or Oo(
For videophone calls, press d or Oo(
) to send
the image through your camera, or press m(
) to
Displaying an icon on the
send a substitute image.
desktop (See page 29)
You can answer a call also by pressing the switch on an
earphone/microphone (option). For videophone calls, the image through your camera
is sent to the other party.
Information
Record Message does not work when “
” is displayed.
When Public mode (Drive mode) and Record Message are simultaneously activated,
the former has priority and the latter does not work.
The priority order of answer messages is as follows: “Setting for Phonebook entry” →
“Group setting” → “Record message setting”.
If “Voice announce” selected as an answer message is deleted, the answer message
will be set to “Japanese 1”.
70
Information
When Voice Mail Service or Call Forwarding Service is set at the same time as
Record Message, the priority depends on the ring time set for Voice Mail Service or
Call Forwarding Service. To give Record Message priority, set the ring time for
Record Message Setting shorter than that for Voice Mail Service or Call Forwarding
Service. Even when you do this, Voice Mail Service or Call Forwarding Service works
if there are already five record messages for voice calls and two record messages for
videophone calls.
You cannot receive a call from a third party while a voice/video message is being
recorded. The third party will hear the busy tone.
Recording a Message when You cannot
Answer an Incoming Call
Even if a call comes in while Record Message is not activated, you can
record the caller’s voice/video message just for that incoming call.
During ringing!l(
) or >
The caller will hear the answer message and then can leave you a voice/video
message.
During Key Lock, press and hold > for at least one second.
Record Message does not work when five messages for voice calls and two
messages for videophone calls have already been recorded. Also if you press >
while a PushTalk call is arriving, Record Message does not work and Manner
Mode is set.
+m-5-5
Play Back/Erase Record Messages/a Voice Memo
m!LifeKit!Rec. msg/voice memo
!Play/Erase msg.
!Select a record message or voice
memo.
Record Message list
A beep sounds and playback starts.
On the Record Message list, recorded items are indicated by “★”.
It is played back at the volume set for “Volume” (earpiece volume).
When playback ends, a double-beep sounds and the message “Playing” is
cleared from the display.
The date and time the message/memo was recorded are displayed during
playback. When a caller’s phone number is provided, it is displayed. If the caller is
stored in the Phonebook, his/her name is also displayed.
However, the name is not displayed and the phone number only is displayed in
the following cases:
・When you play back a record message from the caller stored as secret data in
Normal Mode
・When you play back a record message for Number A in B Mode (or vice versa)
while using 2in1
If the caller’s phone number is displayed during playback, you can make a voice
call to that phone number by pressing d. Press l(
) to make a
videophone call and press p to make a PushTalk call.
To play back using .>
From the Stand-by display, press > to play back the latest record message. When
record messages are not recorded, a voice memo is played back.
To cancel playback midway
Press Oo(
) or r.
Play Back/Erase Videophone Record Messages/Movie Memos
m!LifeKit!Rec. msg/voice memo
!Play/Erase VP msg.
!Select a videophone record message
or movie memo.
On the Videophone Record Message list, recorded
Videophone Record
items are indicated by “★”.
Message list
It is played back at the same volume of the playback
sound of i-motion files.
The date and time the message/memo was recorded are displayed during
playback.
To play back using .>
From the Stand-by display, press and hold > for at least one second to play back the
latest videophone record message. When videophone record messages are not
recorded, the latest movie memo is played back.
To cancel playback midway
Press Oo(
) or r.
Function Menu of the Record Message List/Videophone
Record Message List
Play
You can play back the message.
Erase this
!YES
You can erase the message/memo also by pressing
i(
) during playback.
71
Voice/Videophone Calls/PushTalk
Playing/Erasing Record Messages/a Voice
Memo/Videophone Record Messages/
Movie Memos
To skip to next message
Each time you press > during playback, messages are played back in the following
order: the next new record message → the oldest record message → a voice memo.
Voice/Videophone Calls/PushTalk
Erase rec. msg.
You can erase all record messages from the Record Message
list, and can erase all videophone record messages from the
Videophone Record Message list.
!YES
Erase movie memo You can erase all movie memos.
[Videophone Record !YES
Message list only]
Erase all
Substitute Image
You can set a Chara-den image for “Substitute image” of “Select image”.
Chara-den display/Chara-den list/Chara-den Recording
)!Substitute image
display!i(
From the Chara-den list, you can set it also by pressing m(
You can erase all record messages and a voice memo from the
Record Message list, and can erase all videophone record
messages and movie memos from the Videophone Record
Message list.
!YES
Using Chara-den
You can set up for sending a Chara-den image to the other party.
Chara-den Setup
You can perform settings for a Chara-den call. These settings are
effective only for during a videophone call.
During a Chara-den call!i(
!Chara-den setup!Do the following operations.
Switch Chara-den
!Select a Chara-den image.
If you switch Chara-den images, the action mode switches to
Whole Action Mode.
Action list
You can display the list for actions that you can operate.
Highlight an action and press Oo(
) to execute the
action. Press l(
) to check the details of the action.
You can display the Action list also by pressing a.
Change action
You can switch the action mode between Whole Action Mode
( ) and Parts Action Mode ( ).
You can switch modes also by pressing l.
See page 353 for Chara-den images.
Set by Call
You can set a Chara-den image to be sent to the other party for making a
videophone call.
Chara-den display/Chara-den list!l(
Enter the destination phone number and press l(
) to make a
videophone call.
When the other party’s phone number is stored in the Phonebook, you can
retrieve it selecting from the Search Phonebook display by pressing Bo.
You can search for the phone number also from Received Calls by pressing Co
or from Redial by pressing Vo.
Information
The priority order of substitute images to be sent to the other party is as follows:
“Setting by call” → “Setting for Phonebook entry” →“Group setting” → “Select image”.
72
).
At videophone
start-up
Whole Action
Mode
SW substitute img. You can switch a substitute image to be sent to the other party to
the still image set for “Pre-installed” of “Select image”.
SW orig. subst. img. You can switch a substitute image to be sent to the other party to
the still image set for “Original” of “Select image”.
Useful Functions for Videophone Calls
Switch Image Display Positions
Switching Cameras
You can switch the display locations of the received image and the sent
image.
At videophone start-up
Inside camera
During a videophone call!l(
During a videophone call, press c(
).
Each time you press
c(
), the displays
switch.
Press l(
) again to switch to the image through the inside camera.
The setting here is effective only for the current videophone call.
Voice/Videophone Calls/PushTalk
You can switch images to be sent to the other party from through the
inside camera to through the outside camera.
Send Substitute Images
You can switch images to be sent to the other party from the image
through your camera to the still image or Chara-den image set as the
substitute image.
See page 353 for Chara-den.
During a videophone call!m(
+c
The substitute image is sent to the other party.
“ ” is displayed while the still substitute image is being sent, and “
” is
displayed if you have set a Chara-den image as a substitute image (during a
Chara-den call).
Press m(
) again to switch from the substitute image to the image
through your camera.
Information
+c
The priority order of substitute images to be sent to the other party is as follows:
“Setting by call” → “Setting for Phonebook entry” → “Group setting” → “Select image”.
Note that “Setting for Phonebook entry” and “Group setting” are disabled when a
videophone call comes in without notifying the caller ID.
Even when you make a videophone call sending a substitute image, you are charged
for the digital communication.
73
Brightness
Zoom
Voice/Videophone Calls/PushTalk
At videophone start-up
WIDE
You can adjust the magnification for the camera image to be sent to the
other party. During a videophone call, the maximum magnification is
about 1.9 times for the inside camera and about 6.9 times for the outside
camera.
During a videophone call
!Use No to adjust the magnification.
At videophone
start-up
White balance
At videophone
start-up
Automatic
The former zoom setting returns when the videophone call ends.
Function Menu during Videophone Call
CHG to voice call
See page 51.
Photo light
You can turn on the photo light while sending the images
through the outside camera.
!ON or OFF
At videophone
start-up
OFF
You can set whether to communicate through the FOMA
terminal or a Bluetooth device. (See page 417)
Send DTMF tone/
DTMF tone OFF
During a Chara-den call, you can switch to the DTMF
Transmission Mode that enables you to enter the data from
the numeric keys and to send DTMF (touch-tone signals). You
can operate it only during a Chara-den call.
“Send DTMF tone” is displayed when the mode is not DTMF
Transmission Mode and “DTMF tone OFF” is displayed in
DTMF Transmission Mode.
In DTMF Transmission Mode, you cannot operate the action
of Chara-den images.
The DTMF tone may not be received depending on the
device of a receiving end.
V.phone settings
74
At videophone
start-up
Normal
Night mode
Talk on BT/Phone
Visual preference
Color mode set
See page 75.
At videophone
start-up
OFF
Focus
At videophone
start-up
Landscape
You can adjust the brightness of the camera image to be sent
to other party to -3 (dark) through +3 (bright).
!Select a brightness level.
You can adjust the colors of the camera image to be sent to
the other party, to make the colors look more natural.
!Select an item.
Fine weather. . . . . . For talking outdoors in fine weather
Cloudy weather . . . For talking in cloudy weather or in the
shade
Automatic. . . . . . . . For adjusting white balance
automatically
Light bulb . . . . . . . . For talking under incandescent light
You can switch the color tone of the camera image to be sent
to the other party.
!Select a color tone.
You can lengthen the camera’s exposure time to make the
camera image to be sent clear in a dark place.
!ON or OFF
You can set the focus for the outside camera during a
videophone call.
!Close-up or Landscape
The focus for the inside camera is fixed to “Portrait” (suitable
mode to shoot portraits), so you cannot change the setting.
Chara-den setup
See page 72.
Backlight
You can select whether to light the display constantly or light
for about 15 seconds after an operation.
!Constant light or 15 seconds light
LCD AI
See page 113.
Own number
You can display your phone number.
Key guide
You can display the guide of key operation during a
videophone call.
Setting Hands-free Videophone
Changing Image Displays for Videophone
Calls
You can set whether to switch to Hands-free automatically for when a
videophone call starts.
You can set an image to be sent to the other party.
See page 61 for the operation while Hands-free is activated and how to switch to
Hands-free.
On hold . . . . .Sets an image for during answer-hold (On hold).
Holding . . . . .Sets an image for while a call is on hold (Holding).
Substitute image
. . . . . . . . . . . .Sets a substitute image (still image or Chara-den) for when the
camera is off.
Record message
. . . . . . . . . . . .Sets an image while recording a record message.
Preparing . . . Sets an image for while playing back an answer message.
Movie memo
. . . . . . . . . . . .Sets an image for while recording a movie memo.
Setting Image Quality for Videophone
Calls
You can set the quality of the received image on the display.
m!Set./Service!Videophone!Visual preference
!Select an image quality.
“Prefer motion spd” is effective when there is motion in an image. When there is
little motion, the quality becomes better if you set to “Prefer img qual”.
If you operate from the Function menu during a videophone call, the setting is
effective only for the current videophone call.
Information
If the radio wave conditions weaken during a videophone call, the image may appear
like a mosaic.
m!Set./Service!Videophone!Select image
!Select an item.
Select an image.
Pre-installed . . . For sending a pre-installed still image to the other party.
Original . . . . . . . For sending an appropriate message with a still image stored
using “Set display”.
Chara-den . . . . . For sending a Chara-den image selected by “Substitute image”
from the Function menu while a Chara-den image is displayed.
(See page 72)
(Displayed only when “Substitute image” has been selected in
step 1.)
Press l(
) to play back a demo to check the still image or Chara-den
image.
To change the setting of “Original” or “Chara-den”, press i(
), select
“Change setting”, then select a still image or Chara-den image. If you have
selected “Original”, select a still image after selecting a folder.
Information
Even if you delete the still image selected from “Original”, that still image is displayed
to the other party. To change, set by “Change setting” or “Set display”.
75
Voice/Videophone Calls/PushTalk
m!Set./Service!Videophone
!Hands-free w/ V. phone!ON or OFF
Set by Call
Voice/Videophone Calls/PushTalk
You can set an image to be sent to the other party for making a
videophone call.
Enter a phone number
or
call up the detailed display of a Phonebook entry, redial
item, dialed call record, or received call record.
i(
)!Select image!My side or Chara-den
The setting is completed when you select “My side”.
To cancel the setting by call, select “Release”. The setting is completed.
Select a Chara-den image.
Setting for Switching a Voice/Videophone
Call during a Call
You can let the other party know that your FOMA terminal can switch
between a voice call and a videophone call.
This function is set to “Indication ON” at the time of contract. When
“Notify switchable mode” is set to “Indication ON”, the caller can switch
between the videophone call and voice call.
You cannot operate “Notify switchable mode” when you are out of the service area or
radio waves do not reach, or during a call.
m!Set./Service!Videophone
!Notify switchable mode!Do the following operations.
Indication ON
Redialing as a Voice Call when a
Videophone Call cannot be Connected
If a videophone call cannot be connected, it will be automatically redialed
as a voice call.
m!Set./Service!Videophone!Voice call auto redial
!ON or OFF
Information
The charges for calls once switched to voice calls are billed at the rates for the voice
calls.
Voice Call Auto Redial does not work when a videophone call cannot be connected
such as when the line is busy or the other party’s phone is in Public mode (Drive
mode). However, Voice Call Auto Redial works when you make a videophone call to a
phone that does not support the videophone function.
76
!YES!OK
Indication OFF
!YES!OK
Check indication
You can check the setting of the function.
!OK
Selecting Response to Incoming
Videophone Calls during i-mode
m!Set./Service!Incoming call
!V.phone while packet!Select an item.
V.phone priority
. . . Shows the Videophone Call Receiving display. When you answer the
videophone call, packet communication is disconnected.
Packet downld priority
. . . Rejects the videophone call and continues the communication.
V.phone answerphone
. . . Connects the incoming videophone call to the Voice Mail Service Center.
Call forwarding
. . . Forwards the incoming videophone call to the forwarding destination.
Information
If you have not signed up for Voice Mail Service or Call Forwarding Service, “Packet
downld priority” works even if you set to “V.phone answerphone” or “Call forwarding”.
Checking inside of a Room when You are
Out
You can operate your FOMA terminal from an external device such as
your personal computer for making or receiving videophone calls by
connecting them using the FOMA USB Cable with Charge Function 01/02
(option).
To use this function, you need to install a videophone application
program on a dedicated external device or personal computer, and
further, you need to prepare equipment (commercial item) such as an
earphone/microphone or USB compatible web camera.
For operating environments for a videophone application program and how to set or
operate it, refer to the instruction manual or other literature for an external device.
You can use “ドコモテレビ電話ソフト (DOCOMO Videophone Software)” as the
application program that supports this function.
You can download “ドコモテレビ電話ソフト (DOCOMO Videophone Software)”
from the DOCOMO website.
You can use the inside camera of the FOMA terminal as a monitoring
camera to observe the remote location from a phone that has the
videophone function based on 3G-324M. While “Remote monitoring” is
set to “ON”, the FOMA terminal automatically starts Remote Monitoring
when it receives a videophone call from a phone number stored as
“Other ID” of “Remote monitoring”.
m!Set./Service!Videophone!Remote monitoring
!Enter your Terminal Security Code.
Other ID!
!Enter a phone number.
To release Remote Monitoring, select “Set”, then select “OFF”.
To change, select the stored phone number.
You can enter up to five phone numbers of up to 26
Other ID list
digits by using numerals, #, :, and +.
To return to the setting display for Remote Monitoring, press r from the Other
ID list after storing phone number.
Information
You cannot make a videophone call from the external device during a voice call.
When you have signed up for Call Waiting Service, an incoming videophone call from
an external device during a voice call is recorded as a missed call in Received Calls.
The same applies for an incoming voice call, videophone call, and 64K data
communication during a videophone call from an external device.
Ring time!Enter a ring time (seconds).
Set!ON
You can enter the time from “003” through “120” in three digits until Remote
Monitoring starts after receiving a videophone call.
You cannot set the same ring time for Remote Monitoring, Auto Answer Setting
and Record Message Setting. Set a different time for each.
When receiving videophone calls from the phone numbers stored as “Other ID”,
the FOMA terminal automatically answers to start Remote Monitoring after the
ring time elapses.
“
” is displayed while this function is set to “ON”.
You cannot set to “ON” in Manner Mode.
77
Voice/Videophone Calls/PushTalk
Using Videophone Calls by Interfacing to
External Devices
Voice/Videophone Calls/PushTalk
Function Menu of the Other ID List
Look-up address
You can call up a phone number in the Phonebook, Dialed Calls,
or Received Calls to enter it.
!Select an item.
Phonebook
. . .Call up a Phonebook entry and select a phone number.
Dialed calls
. . .Highlight a phone number and press Oo(
).
Received calls
. . .Highlight a phone number and press Oo(
).
Delete this
!YES
Delete all
!YES
Information
If you delete all phone numbers stored as “Other ID”, “Remote monitoring” is set to “OFF”.
Perform Remote Monitoring
Make a videophone call from a stored phone number.
After the ring time set for “Remote monitoring” elapses, Remote Monitoring
automatically starts.
The image through the receiving end’s camera appears and the sound comes
out of the speaker.
You cannot set Voice-only Remote Monitoring.
Make a videophone call notifying your caller ID. If the caller ID is not notified,
Remote Monitoring will not start and the call will be handled as an ordinary
incoming videophone call.
Remote Monitoring ends when the calling end or
receiving end presses h.
For answering a videophone call without starting Remote
Monitoring at the receiving end
Press d or Oo(
) before the FOMA terminal answers a videophone call
automatically. If you press m(
), the videophone call starts sending the
substitute image to the other party.
When a remote monitoring call comes in, “Setting when opened” is disabled.
If you press h when a remote monitoring call comes in, the call will be cut and
Remote Monitoring will not start.
78
Information
When your FOMA terminal is used for the receiving end, an image through the caller’s
camera appears, and sound comes out. (You cannot switch to a substitute image.)
Remote Monitoring does not start during Manner Mode and Public mode (Drive
mode). However, it starts even during Lock All.
When Remote Monitoring is set to “ON” and a videophone call comes in from the
phone number set as “Other ID”, Remote Monitoring starts after the set ring time,
even when “Ring time”, “Auto answer setting”, or “Record message setting” is set and
regardless of their ring times.
When Remote Monitoring is not performed, it is recorded in Received Calls as a
missed videophone call.
If an earphone/microphone (option) is connected when a remote monitoring call
comes in, the ring tone sounds from both the earphone and the speaker, even when
“Headset usage setting” is set to “Headset only”.
The ring tone for Remote Monitoring sounds. (You cannot change the ring tone for
Remote Monitoring.)
The ring tone sounds at the volume set for “Videophone” of “Ring volume”, but at
“Level 2” if you have set “Step”, “Level 1” or below. The color is “Gradation”, and its
lighting pattern is “Standard”, regardless of the Incoming Illumination setting.
You cannot put incoming remote monitoring calls on answer-hold (On Hold).
If you set both Call Forwarding Service and Remote Monitoring, and give priority to
Remote Monitoring, set its ring time shorter than that for Call Forwarding Service.
To use Call Forwarding Service for Remote Monitoring, store the phone number of
dialing side as “Other ID” and set a 3G-324M videophone as the forwarding destination.
You may be imposed punishment according to the law and rule (such as the
nuisance prevention ordinance) if you use the FOMA terminal to give a
remarkable nuisance and misdeed to the public.
Please be considerate of the privacy of individuals around you
when shooting and sending photos using camera-equipped
mobile phones.
PushTalk
This service provides you a pleasurable group calls among multiple
parties (two to five persons including yourself). The participants can
speak by turns by pressing the PushTalk key.
■PushTalkPlus※
This service enables you to have a PushTalk call with up to 20 persons including you.
You can use the shared Phonebook on the network, and can check the members for
their status, thus PushTalk becomes more useful.
※You need to subscribe separately.
For details such as how to operate, refer to the booklet which is supplied at
subscription.
Enter the other party’s phone number
!p
When you are dialing, a confirmation tone for starting a
PushTalk call sounds for a few seconds, and then the
same ringback tone as the voice (videophone) call
sounds.
You can make a group call to multiple persons using
the PushTalk Phonebook. (See page 83 and page 84)
Press h to end the communication after talking.
A tone to notify the disconnection of communication sounds at the other end.
When a call you made is a group call, the PushTalk communication itself
continues even if you press h, and “Disconnected” appears on each member’s
display and a confirmation tone sounds. However, when all the members cannot
communicate due to “Disconnected”, “No PT Func”, etc., the PushTalk
communication itself ends.
Information
The talker is charged a communication fee from when he/she presses .p and the
talker’s right obtained tone sounds.
You cannot make emergency calls at 110/119/118 from PushTalk.
The duration you can talk per talker’s right is limited. The talker’s right release notice
tone sounds before the limited time arrives, and the talker’s right is released. In
addition, the PushTalk communication itself ends when no one gets the talker’s right
in a certain period of time.
Just after purchase, Hands-free is automatically activated by “Hands-free w/
PushTalk”. (See page 86) However, Hands-free is deactivated during Manner Mode
regardless of “Hands-free w/ PushTalk”.
The FOMA terminal works according to “Setting when closed” if you close it during
communication. You can set also by pressing +i(
) and selecting “Set. when
closed”. (See page 65)
79
Voice/Videophone Calls/PushTalk
When the other party answers, a confirmation tone for
starting communication sounds.
“ ” blinks during dialing and lights during
communication.
When you get the talker’s right, the talker’s right
obtained tone sounds. The other party hears your voice
only while you are pressing p and having the talker’s
right. When you release p, the talker’s right is
released, and a confirmation tone sounds.
You cannot get the talker’s right and an error tone
sounds even if you press p when another member has
it.
Press l(
) or press i(
) and select “Add member” to add a
member. Go to step 1 on page 81.
※You are charged a PushTalk communication fee each time you press the PushTalk
key (speak).
For details on PushTalk or compatible models, refer to DOCOMO website or “Mobile
Phone User’s Guide [Network Services]”.
Making a PushTalk Call
When the other party answers, talk
while pressing p.
Voice/Videophone Calls/PushTalk
Information
Whether to notify others of your phone number when you make PushTalk calls follows
the setting for “Activate/Deactivate” of “Caller ID notification” (see page 46). However,
when you set “Notify caller ID” from the Function menu for dialing, or when “Notify”/
“Not notify” is displayed in the detailed Redial/Dialed Call/Received Call display, each
of those settings will work.
When you make a PushTalk call with your phone number notified, your phone
number as well as all members’ phone numbers are notified to all members including
added members. When you make a PushTalk call without notifying your phone
number, “User unset” appears in the caller’s and member’s fields on the displays of all
the members including added members. Your phone number is very important
information, so take the utmost care to notify others of it.
If you make a PushTalk call during i-mode communication, the i-mode communication
is disconnected.
You cannot use PushTalk by Number B of 2in1.
Making/Receiving a PushTalk group call
You can use the PushTalk Phonebook or Redial/Dialed Calls/Received Calls to
communicate with multiple members.
While making or receiving a PushTalk group call, the group name and the members in
the group are displayed. Press No to confirm other members. When a call is received
with the other party’s phone number not provided, “User unset” is displayed.
■Display while dialing/communicating
7The phone number of the member who has the talker’s
right is displayed, and the state of the talker’s right is
displayed in color of the round icon at the upper left.
When the name of that member, phone number, and
image are stored in the Phonebook, his/her name and
image are displayed. However, when you cannot receive
a member’s information correctly, “?” is displayed.
During group
communication
Color of the
round icon at the
upper left
Blue
Green
State of the talker’s rights
Calling
You can get the talker’s right.
Blinking in green You have the talker’s right.
Blinking in yellow Another member has the talker’s right.
Re-participating or participating midway in PushTalk
communication
Use Redial/Dialed Calls/Received Calls to make a PushTalk call while the PushTalk
communication continues among other members.
If the PushTalk communication has already been finished, your call is dialed as a new
PushTalk call.
80
The talker’s right will be released automatically in a few seconds
Blinking in green
because it has long been retained (A release notice tone
and red
sounds).
The corresponding state※ of each member is shown.
Display
Calling
Corresponding state of members
Calling to the member
Connected
Has participated in the PushTalk call.
No PT Func
The destination phone does not support PushTalk.
The destination phone is out of the service area or turned off.
Busy
A voice call, videophone call, or PushTalk communication is in
progress at the member.
i-mode communication is in progress at the member who has
given priority to i-mode by “i-mode arrival act”.
ID Request
Driving
PublicMode
Disconnected
You made a call without notifying of your caller ID to the member
who has activated “Caller ID request”.
The member has activated Public mode (Drive mode).
The member has activated Public mode (Power off), and is out of
the service area or the power is turned off.
You have dialed a non-existent number.
The state is other than above: the member does not answer, has
ended the PushTalk call, or does not use a DOCOMO mobile
phone.
※The corresponding states other than “Calling” and “Connected” are displayed only
for the PushTalk communication among three or more members.
(The number of times you have got the talker’s right is the total of the number of “
”
and the number shown in “
”. When 999 times are exceeded, the counting is
reset to 0.
Members can be added from the calling end only.
You can add even the members who use the PushTalk compatible models which do
not have this function.
If you have already made a call to four members, you cannot add a new member
though you can call up a member who has exited the call again.
The added members are not stored in Redial/Dialed Calls.
During PushTalk communication!l(
!Do the following operations.
View PushTalk PB
You can call up a PushTalk Phonebook entry to make a PushTalk
call. (See page 84)
Instead of pressing p, press l(
) to call.
Press c to switch between the PushTalk Phonebook list and
PushTalk Group list.
View phonebook
You can call up a Phonebook entry to make a PushTalk call.
!Call up a Phonebook entry!Highlight a phone number
and press l(
).
Direct input
You can enter a phone number to make a PushTalk call.
!Enter a phone number!l(
View call records
You can call up Dialed Calls/Received Calls to make a PushTalk
call.
!Dialed calls or Received calls!Select a record
!Select a phone number!l(
Information
The caller cannot add members if he/she uses a PushTalk compatible model which
does not have this function.
81
Voice/Videophone Calls/PushTalk
Not avail.
Adding a Member during a PushTalk Call
You can make a PushTalk call to another member during PushTalk
communication and add that member to the communication.
You can add a person to the members by accessing the PushTalk
Phonebook, Phonebook, or Dialed Calls/Received Calls, or by directly
entering a phone number.
You can add up to five members (including yourself), and can repeat
adding up to that number.
Information
Voice/Videophone Calls/PushTalk
For a member who uses a PushTalk compatible model which does not have this
function, the members added during PushTalk communication are not shown and a
confirmation tone does not sound.
Receiving a PushTalk Call
When a PushTalk call comes in,
“PushTalk call” is displayed, the ring
tone sounds, and the Call/Charging
indicator flickers.
“PushTalk group call” is displayed for an incoming
group call.
To reject a call, press i(
) during ringing and
select “Call rejection”. You can reject the call also by
pressing h.
Press p to answer a PushTalk call
!Talk while pressing p.
You can answer also by pressing d or Oo(
instead of p.
When you get talker’s right, the talker’s right obtained
tone is played back. The other party hears your voice
only while you are pressing p and having the talker’s
right. When you release p, the talker’s right is released
and a confirmation tone sounds.
You cannot get the talker’s right and an error tone
sounds, even if you press p when another member
has it.
“Setting when opened” and “Record message setting”
become invalid.
82
Press h to end the communication after talking.
A tone for confirming the end of communication sounds at the other end.
When a call you received is a group call, the PushTalk communication itself
continues even if you press h, and “Disconnected” appears on each member’s
display and a confirmation tone sounds. However, when all the members cannot
communicate due to “Disconnected”, “No PT Func”, etc., the PushTalk
communication itself ends.
Information
The talker is charged a communication fee from when he/she presses .p and the
talker’s right obtained tone sounds.
The duration you can talk per talker’s right is limited. The talker’s right release notice
tone sounds before the limited time arrives, and the talker’s right is released. In
addition, the PushTalk communication itself ends when no one gets the talker’s right
in a certain period of time.
Just after purchase, Hands-free is automatically activated by “Hands-free w/
PushTalk”. (See page 86) However, Hands-free is deactivated during Manner Mode
regardless of “Hands-free w/ PushTalk”.
The FOMA terminal works according to “Setting when closed” if you close it during
communication. You can set also by pressing +i(
) and selecting “Set. when
closed”. (See page 65)
You cannot use “On hold” or “Holding” for PushTalk.
When you received a PushTalk call from the phone number you set for “Call rejection”
or “Reject unknown”, “Disconnected” is replied. When you have activated “Caller ID
request”, “ID Request” is replied.
A PushTalk call that comes in during a voice call, a PushTalk call that comes in during
Public mode (Drive mode), and a voice call (when “PushTalk arrival act” is set to other
than “Answer”), a videophone call, data communication, or a PushTalk call that
comes in during PushTalk communication are recorded as missed calls in Received
Calls.
A PushTalk call that comes in during a videophone call or during data communication
does not work and is not recorded in Received Calls.
After you finish PushTalk communication or when you cannot answer to a PushTalk
call, you can use a received call record to make a PushTalk call and to re-participate
or participate midway in the communication so long as the PushTalk communication
continues among other members. If the PushTalk communication among other
members has already been finished, your call is dialed as a new PushTalk call.
When a caller adds members during PushTalk communication, the added members
are not stored in Received Calls.
Information
View call records
See page 86 for how to respond to the PushTalk call during i-mode communication.
When a PushTalk call comes in during Lock All or Omakase Lock, “
” appears
after the lock is released.
Adding Entries to PushTalk Phonebook
From the items stored in a FOMA terminal’s Phonebook entry, you need
to store a name (reading) and a phone number in the PushTalk
Phonebook. You can store up to 1,000 entries in the PushTalk
Phonebook.
View phonebook
Direct input
Store in Group
You can store PushTalk Phonebook entries in groups. You can store up
to 19 members per group and create up to 10 groups.
p!m(
!Do the following operations.
You can store also by selecting .
If you store multiple phone numbers from a Phonebook
entry, the phone number previously stored in the
PushTalk Phonebook is overwritten.
Information
In the PushTalk Phonebook, you cannot store the Phonebook entries set to B by
Phonebook 2in1 Setting.
PushTalk
Phonebook list
You can access an entry already stored in the FOMA terminal’s
Phonebook and store it in the PushTalk Phonebook.
!Call up a Phonebook entry!Select a phone number!YES
You can store the entry in the PushTalk Phonebook after storing it
in the FOMA terminal’s Phonebook.
!Phone!Select a storing method.
New . . . Go to step 2 on page 88.
Add . . . Go to step 3 on page 92.
When multiple phone numbers are stored in a Phonebook
entry, press l(
) and select the phone number you
want to store in the PushTalk Phonebook. The “★” mark is
added to the phone number that has already been stored in the
PushTalk Phonebook.
PushTalk Phonebook list
!c(
Press c(
list.
) to show the PushTalk Phonebook
PushTalk Group list
Select a group!m(
!Put a check mark for members to be stored
!l(
You can store also by
selecting “” from the Group
Member list.
Group Member list
Group Member
Selection display
Function Menu of the Group Member Selection Display
Members to store
You can display only members applied with a check mark.
Press Oo(
) to store the members to the group.
83
Voice/Videophone Calls/PushTalk
You can access a dialed call record or received call record to
store it in the PushTalk Phonebook. You cannot store in the
PushTalk Phonebook from the dialed/received call record of the
party who is not stored in the FOMA terminal’s Phonebook.
!Dialed calls or Received calls!Select a record
!Select a phone number!YES
Voice/Videophone Calls/PushTalk
Search
!Select a search method.
Reading? . . . See page 93.
Group?. . . . . See page 93.
!Select a member.
You can display the Group Member Selection display with the
searched members selected.
Making a Call from PushTalk Phonebook
You can make a group call to up to four members using the PushTalk
Phonebook or PushTalk group.
PushTalk Phonebook list
!Put a check mark for members you
want to make a call to
!p or l(
Press c(
) to show the PushTalk Group list.
When you do not check any members, the call is made
to the highlighted member.
PushTalk
Phonebook list
Information
84
Group Member list
Information
When five or more members are stored in a group, you cannot make a call to all the
members by selecting the group.
Function Menu of the PushTalk Phonebook List/PushTalk
Group List/Group Member List
When the PushTalk Phonebook list or Group Member list is
displayed, you can display the checked members only.
) to make a PushTalk call.
Press p or Oo(
Press i(
) to select “Notify caller ID” and then you can
select whether to notify your phone number. When “Cancel
prefix” is selected, the FOMA terminal works according to the
setting by “Caller ID notification”.
Search PushTalk
!Select a search method.
PB
Reading? . . . See page 93.
[Phonebook list only] Group? . . . . . See page 93.
!Select a member.
You can display the PushTalk Phonebook list with the searched
members selected.
Make a Call from PushTalk Group
PushTalk Group list!Select a group.
Select a group and press p or l(
) to make a
call to all the members in the group.
Press c(
) to show the PushTalk Phonebook
list.
When you do not check any members, the call is made
to the highlighted member.
Members to call
When all the members cannot communicate due to “Disconnected”, “No PT Func”,
etc., the PushTalk communication ends.
Put a check mark for members you
want to make a call to
!p or l(
Store in P-Talk PB See page 83.
[Phonebook list only]
PushTalk Group list
DEL from P-Talk PB See page 85.
[Phonebook list only]
Edit group members You can edit the members in the group.
[Group list/Member Go to step 2 on page 83.
list]
Edit group name
[Group list only]
!Enter a group name.
You can enter up to 16 full-pitch/32 half-pitch characters.
DEL group
members
[Member list only]
See page 85.
Sound setting
See page 86.
Vibration setting
See page 86.
Auto answer set.
See page 86.
Ring time setting
See page 86.
Hands-Free
See page 86.
Set. when closed
See page 65.
i-mode arrival act
See page 86.
P-Talk arrival act
See page 86.
Network connection You can connect to the network to use PushTalkPlus. This is
available only when you have singed up for PushTalkPlus.
(See page 79)
Deleting PushTalk Phonebook Entries
PushTalk Phonebook list!i(
!DEL from P-Talk PB!Do the following operations.
Delete this
!Select a deleting method.
DEL from P-Talk PB
. . . Deletes an entry in the PushTalk Phonebook only. Does not
delete the entry in the FOMA terminal’s Phonebook.
DEL from all PBs
. . . Deletes an entry in both the PushTalk Phonebook and
FOMA terminal’s Phonebook.
!YES
Delete all
!Enter your Terminal Security Code!YES
The FOMA terminal’s Phonebook entries are not deleted.
Delete from PushTalk Group
PushTalk Group list!i(
!YES
Delete Group Members
Group Member list!i(
!Do the following operations.
)!DEL from PT group
)!DEL group members
Delete this
!YES
Delete all
!Enter your Terminal Security Code!YES
Information
Even when you delete PushTalk groups or group members, the PushTalk Phonebook
entries and FOMA terminal’s Phonebook entries are not deleted.
85
Voice/Videophone Calls/PushTalk
DEL from PT group See page 85.
[Group list only]
Setting for Making/Receiving a PushTalk
Call
Voice/Videophone Calls/PushTalk
m!Set./Service!PushTalk
!Do the following operations.
Auto answer setting !Select an item.
ON. . . . . Automatically answers immediately after receiving
regardless of “Ring time setting”.
OFF. . . . Does not answer automatically.
Ring time setting
!Enter a ring time (seconds).
Enter two digits from “01” through “60”.
“Disconnected” is displayed at the other end after the ring time
has elapsed.
Hands-free w/
PushTalk
You can set whether to hear the other party’s voice from the
speaker or from the earpiece for when PushTalk communication
starts.
!ON or OFF
See page 61 for how the FOMA terminal works while
Hands-free is activated and how to switch to Hands-free during
communication.
PushTalk arrival act !Select an item.
Voice mail . . . . . . . Connects an incoming voice call to the
Voice Mail Service Center.
Call forwarding . . . Forwards an incoming voice call to the
forwarding destination.
Call rejection . . . . . Rejects an incoming voice call and does not
answer.
Answer. . . . . . . . . . Shows the Voice Call Receiving display.
Sound setting
You can set a pattern for the confirmation tones which sound
during PushTalk communication.
!Select a pattern.
Vibration setting
You can set whether to be notified by vibration for when you try to
get the talker’s right or when a member’s state changes to
“Connected”.
!ON or OFF
86
Information
When you set to “ON”, calls are automatically answered even when the FOMA
terminal is closed regardless of “Setting when closed”.
When you set to “ON”, calls are automatically answered after switching to Hands-free
regardless of “Hands-free w/ PushTalk”. However, the FOMA terminal works following
the setting of “Hands-free w/ PushTalk” if you open the FOMA terminal after you
answer a call with the FOMA terminal closed.
When you set to “ON”, the ring tone, vibrator, Call/Charging indicator, and backlight
do not work. Calls are not automatically answered during Manner Mode.
If you press -h for an incoming voice call while “Answer” is set, the Call Receiving
display appears after you finish the PushTalk communication, and then you can
answer the voice call. To continue the PushTalk communication, press +i(
and select “Call rejection”, “Call forwarding”, or “Voice mail”.
In the “Simple” mode, some confirmation tones (talking right obtained tone, etc.)
during PushTalk communication become silent.
i-mode Arrival Act
You can set whether to show the PushTalk Call Receiving display for
when a PushTalk call comes in during i-mode communication.
m!i-mode!i-mode settings!Common settings
!i-mode arrival act!Select an item.
PushTalk preferred . . . . Ends i-mode communication and brings up the PushTalk
Call Receiving display.
i-mode preferred . . . . . . Rejects receiving a PushTalk call and continues i-mode
communication. The call is not recorded in Received
Calls.
Phonebook
Phonebooks Available for FOMA Terminal . . . . . . . . . . . . . . . . .
Storing Phonebook Entries . . . . . . . . . . . .
Storing Displayed Phone Number/Mail Address in Phonebook
.....................................................
Setting Groups . . . . . . . . . . . . . . . . . . . . . . . . . .
Making a Call from Phonebooks . . . . . . .
Editing Phonebook Entries . . . . . . . . . . . . . .
Deleting Phonebook Entries . . . . . . . . . . . . . . . . .
Checking Phonebook Storage Status. . . .
Making a Call with a Few Keys Operation . . . . . <2-touch Dial>
Accessing Phonebook Entries by Voice . . . . . . . .
88
88
92
92
93
97
98
98
98
99
87
Contents of Phonebook
Setting item
Basic item
Number of entries
Name (Reading)
Group
Phone number
Phone number icon
Mail address
Mail address icon
Address
Location information
Birthday
Memo
Image
Memory No.
Ring tone
Vibrator
Illumination
Picture
Chara-den
Mail ring tone
Mail vibrator
Mail illumination
Answer message
Restrict dialing
Call rejection
Call acceptance
Call forwarding
Voice mail
Secret code
Storage in Secret Mode or
Secret Data Only
Restrictions
Phonebook
You can use two types of Phonebooks, namely the Phonebook in the
FOMA terminal itself, and the Phonebook on the UIM.
88
FOMA terminal
1,000 entries
○
19 groups
4 phone numbers
○
3 mail addresses
○
○
○
○
○
100 images
From 000 to 999
○
○
○
○
100 Chara-den
images
○
○
○
○
UIM
50 entries
○
10 groups
1 phone number
—
1 mail address
—
—
—
—
—
—
—
—
Contents of Group
Phonebooks Available for FOMA Terminal
Name
Ring tone
Vibrator
Illumination
Picture
Chara-den
Mail ring tone
Mail vibrator
Mail illumination
Answer message
FOMA terminal
○
UIM
○
○
—
○: Can be stored.
—: Cannot be stored.
You can set your UIM into another FOMA terminal and use the UIM Phonebook
entries.
Storing Phonebook Entries
You can store Phonebook entries in the FOMA terminal (Phone) or on the
UIM.
Xo(for at least one second)!Phone or UIM
The Edit Name display appears. Go to step 2 and enter a name.
Do the following
operations.
You can press No to switch
between the “Basic item” tab and
“Settings” tab for the FOMA
terminal’s Phonebook.
○
—
○
—
○
—
For the FOMA
terminal
For the UIM
You can enter the name of the person or company in kanji,
hiragana, katakana, alphabetic characters, or numerals.
!Enter a name.
For the FOMA terminal, you can enter up to 16 full-pitch/32
half-pitch characters. You can enter pictograms and symbols as
well.
For the UIM, you can enter up to 10 full-pitch characters/21
half-pitch alphanumeric characters. (Half-pitch katakana
characters cannot be entered.) When the entry contains both
full-pitch and half-pitch characters, you can store up to 10
characters from the beginning regardless of full-pitch or
half-pitch characters.
Reading
You can enter the reading in half-pitch katakana, alphabetic
characters, or numerals.
!Edit the reading.
For the FOMA terminal, you can enter up to 32 half-pitch
characters. You can enter half-pitch symbols as well.
For the UIM, you can enter up to 12 full-pitch characters/25
half-pitch alphanumeric characters. (Half-pitch katakana
characters cannot be entered.) When the entry contains both
full-pitch and half-pitch characters, you can store up to 12
characters from the beginning regardless of full-pitch or
half-pitch characters.
If the displayed reading is acceptable, you do not need to edit it.
However, depending on the characters entered for names or
entering method, they are not reflected in the reading.
If you enter “ゎ (reduced size)” or “ヮ (reduced size)” for a name,
“ワ (half-pitch, regular size)” (for the FOMA terminal) and “ワ
(regular size)” (for the UIM) are displayed in the reading field.
Group
In the FOMA terminal, 19 groups are available. On the UIM, 10
groups are available.
!Select a group.
When the storage is completed with no group selected, the
Phonebook entry is stored in “No setting”.
Phone number You can store up to four phone numbers per Phonebook entry in the
FOMA terminal. You can set an icon for each phone number to
categorize mobile phone numbers, office phone numbers, and so on.
You can store only one phone number per Phonebook entry on the
UIM.
!Enter a phone number.
Enter from the city code for the phone numbers.
You can enter up to 26 digits. However, you can enter up to 20
digits for blue UIMs.
Press and hold a for at least one second to insert a pause (p)
into the phone number you store. However, you cannot insert
the pause (p) to the beginning of phone number or insert it
consecutively. The pause (p) inserted to the end of phone
number is not stored.
If you insert “:” in the middle of a phone number, you cannot
make a call. However, the phone number is recorded in Redial
or Dialed Calls.
You can store the phone number which includes “#” such as
that for information service as well.
!Select an icon.
If you have stored a phone number in the FOMA terminal,
another “
” will appear in the
Add-to-Phonebook display. To store another phone number,
select “
”.
Mail address
You can store up to three mail addresses per Phonebook entry in
the FOMA terminal. You can set an icon for each mail address to
categorize mobile phone addresses, home addresses, and so on.
You can store only one mail address per Phonebook entry on the
UIM.
!Enter a mail address.
The mail address can consist of up to 50 half-pitch alphabets,
numerals or symbol characters.
When the mail address is “phone number@docomo.ne.jp”,
store the phone number only.
For the FOMA terminal, you can set a secret code as well. (See
page 97)
!Select an icon.
If you have stored a mail address in the FOMA terminal, another
“
” will appear in the Add-to-Phonebook display.
To store another mail address, select “
”.
89
Phonebook
Name
!Enter a ZIP code!Enter a postal address.
You can enter up to 7 digits for the zip code.
You can enter up to 50 full-pitch/100 half-pitch characters for the
postal address. Further, you can enter pictograms as well.
You cannot enter “〒” or “-” (hyphen) in the zip code.
Location
information
!Select an item.
By position loc.
. . .Measures the current location (see page 322) and store the
location information. After checking the location information,
press Oo(
).
From loc. history
. . .Select a piece of location information from Location History
(see page 326) and store it.
Attach from image
. . .Stores the location information from an image. Select a
folder, then the image.
From own number
. . .Stores the location information from “Own number”. Enter
).
your Terminal Security Code and press Oo(
To delete the stored location information, select “Delete location
info”.
Phonebook
Address
Birthday
Memo
90
!Enter a birthday.
You can enter the birthday from January 1, 1800 through
December 31, 2099.
You can check the birthday from Schedule. (See page 398)
Image
The stored still image is displayed when you call up the
Phonebook entry.
!Select an item.
Select image . . . You can store a still image in Data Box.
Shoot image . . . You can store the shot still image.
Perform step 2 through step 3 on page 230.
To release the stored still image, select “Release image”.
The size of a still image you can store is Stand-by (480 x 854) or
smaller and up to 500 Kbytes in JPEG format or GIF format.
If you store a still image larger than 72 x 54 dots, it is displayed
shrunk on the detailed Phonebook display.
If you store a still image larger than 240 x 180 dots, it is
displayed shrunk on the Call Receiving display.
When “Disp. PH-book image” is set to “ON”, the stored still
image is displayed for an incoming call. However, when another
image is stored for “Picture”, that image is preferentially
displayed for the incoming call.
Memory No.
!Enter a memory number.
Enter a three-digit number of “000” through “999”.
The lowest empty memory number “010” through “999” is
entered in advance.
If “010” through “999” are all occupied, the lowest empty
memory number from “000” through “009” is entered.
Ring tone
You can set a ring tone for when a voice call or videophone call
comes in from the person stored in the Phonebook.
!Select ring tone
Go to step 2 on page 102.
To release the stored ring tone, select “Release ring tone”.
Vibrator
You can set a vibration pattern for when a voice call or
videophone call comes in from the person stored in the
Phonebook.
!Select vibrator!Select a vibration pattern.
To release the stored vibrator, select “Release vibrator”.
!Enter a memo.
You can enter up to 100 full-pitch/200 half-pitch characters.
Further, you can enter pictograms as well.
You can set an illumination pattern for when a voice call or
videophone call comes in from the person stored in the
Phonebook.
!Select illumination!Select an item.
To release the stored illumination, select “Release illumination”.
Answer
message
Picture
You can set an image to be displayed for when a call comes in
from the person stored in the Phonebook.
!Select picture!Select a type of image!Select a folder
!Select an image.
To release the stored image, select “Release picture”.
Chara-den
The stored Chara-den image is displayed as a substitute image
for videophone calls with the person stored in the Phonebook.
!Select Chara-den!Select a Chara-den image.
To release the stored Chara-den image, select “Release
Chara-den”.
Mail ring tone
You can set a ring tone for when a mail message comes in from
the person stored in the Phonebook.
!Select ring tone
Go to step 2 on page 102.
To release the stored mail ring tone, select “Release ring tone”.
Mail vibrator
You can set a vibration pattern for when a mail message comes
in from the person stored in the Phonebook.
!Select vibrator!Select a vibration pattern.
To release the stored mail vibrator, select “Release vibrator”.
Mail illumination You can set an illumination pattern for when a mail message
comes in from the person stored in the Phonebook.
!Select illumination!Select an item.
To release the stored mail illumination, select “Release
illumination”.
Press l(
You can set an answer message for Record Message by
Phonebook entry.
!Select answer message!Select an answer message.
To release the stored answer message, select “Release answer
message”.
).
If you have not entered any name, “
store the entry.
” is not displayed and you cannot
Phonebook entries while editing
When the low battery alarm sounds
The Phonebook entry you are editing is saved automatically. The confirmation display
appears asking whether to resume editing when you continue editing after charging the
battery or when you operate step 1 on page 88 and select the storage location for the
interrupted Phonebook entry after changing to a charged battery.
Recall. . . . You can resume editing the Phonebook entry.
New . . . . . You can edit a new Phonebook entry. In this case, the interrupted data is
retained. If you execute “Add to phonebook” after storing the new Phonebook
entry, the confirmation display appears again.
Only the most recently interrupted entry is retained.
If you resume editing the data but then cancel editing without storing it, that data will be
abandoned. Once you recall the data, be sure to store it.
If you receive a call or mail
You can respond it leaving the edited data as it is, thanks to the Multitask function.
To return to the Phonebook Edit display, press and hold x for at least one second to
switch the menu. You can return to the Phonebook Edit display also by ending the call or
mail function.
91
Phonebook
Illumination
Storing Displayed Phone Number/Mail
Address in Phonebook
Phonebook
You can store the displayed or selected phone number, mail address,
and still image in the FOMA terminal’s or UIM’s Phonebook.
Operation
While a phone number is entered
While a redial item, dialed call record, or received call
record is displayed
While Sent Address or Received Address is displayed
While a site or screen memo is displayed
While the text of Message R/F or mail is displayed
While the data scanned by Bar Code Reader is displayed
While a ToruCa file is displayed
While your current location is displayed
While the location history is displayed
While a registered LCS client is displayed
While the Still Image list or a still image is displayed
Storable items
Phone number
Phone or UIM!Select a storing method.
Select a search method!Search the Phonebook
!Select a Phonebook entry to be stored!Oo(
Phone number/Mail address
Phone number/Mail address
Phone number/Mail address
Phone number/Mail address
Phone number/Mail address
Location information
Location information/
Phone number/Mail address
Name/Phone number
Still image
Call up/Select an item to be stored!i(
!Add to phonebook
New . . . Go to step 2 on page 88.
Add . . . Adds data to the existing Phonebook entry. When storing data on the
UIM, “Overwrite” is displayed.
The phone number or mail address is entered automatically.
See step 2 on page 88 to edit other items in the Phonebook entry.
When you store into the FOMA terminal’s Phonebook, you can remain the
original entry and store a new entry into a different location by changing the
memory number.
Phone number
When you operate from the detailed mail display, select “Store” from the Function
menu and then select “Add to phonebook”.
To store the address of the sender (or of another recipient of simultaneous mail)
of the received mail or the destination address of the sent mail into the
Phonebook, select “Store” from the Function menu and then select “Store
address”. If the addresses of the sender and another recipient of simultaneous
mail are found or the multiple destination addresses are found, select a mail
address or phone number to be stored.
To store a still image in the Phonebook, select “Set display” from the Function
menu and then select “Phonebook”.
When “Add to phonebook” is displayed on the Scanned Code Result display for
Bar Code Reader, select “Add to phonebook”; then other information in the
scanned code besides the phone number or mail address is entered into each
field.
92
l(
)!YES
If you store the entry in the UIM Phonebook, select “Overwrite” to overwrite the
original entry, or select “Add” to store it as a new entry.
Information
The Phonebook entry does not store the information of “Notify caller ID” included in
Redial/Dialed Calls. To set Caller ID Notification, add “186”/“184” to the phone
number and store it.
Characters that cannot be stored may be replaced by spaces or deleted, and then
stored.
You may not be able to store the information from some sites into the Phonebook.
Setting Groups
You can utilize the Phonebook by sorting the entries by group such as
“Company” or “Friend”, or by your interest such as “Baseball” or
“Ceramic art”. You can set a ring tone, vibration pattern, or illumination
by group.
m!Phonebook!Group setting
The groups on the UIM are indicated by “
”.
To reset the group names and respective settings by group, which have already
been stored, press i(
), select “Reset group”, and then select “YES”.
2
Highlight a group and press l(
!Select an item to be set!Set the contents.
Press l(
).
Memory No.?
You can search for the entry by the memory number assigned
[FOMA terminal only] when it was stored in the Phonebook.
!Enter the memory number.
Enter from “000” through “999” in three digits.
The tabs appear on the top of the Phonebook list. (See page 94)
From the Stand-by display, you can press d and then press
Bo to display the Memory No. Dial display. From there you can
make a voice call by entering the memory number of the phone
number.
Name?
You can enter the other party’s name from the first character and
search. You do not need to enter the full name.
!Enter a part of the name!Bo
Phone number?
You can enter a part of the other party’s phone number and
search. You can search for the entry even from the middle of
phone number.
!Enter a part of the phone number!Bo
You can display the Phonebook list also by entering a part of
the phone number from the Stand-by display or the “Talking”
display, and pressing Bo.
Mail address?
You can enter a part of the other party’s mail address and search.
You can search for the entry even from the middle of mail address.
!Enter a part of the mail address!Bo
Making a Call from Phonebooks
You can retrieve stored Phonebook entries by eight search methods.
Xo!Do the following operations.
The display for the same search method as the
previous one appears once you have carried out a
search. Press r to show the Search Phonebook
display.
You can show the Search Phonebook display also by
m!Phonebook!Search phonebook.
Search Phonebook
display
All?
You can show all Phonebook entries.
The tabs appear on the top of the Phonebook list. (See page 94)
Reading?
You can enter the reading of the other party’s name from the first
character and search. You do not need to enter the full reading.
!Enter a part of the reading!Bo
The tabs appear on the top of the Phonebook list. (See page 94)
You can show Phonebook entries stored in a specified group.
!Select a group.
The tabs appear on the top of the Phonebook list. (See page 94)
If you press i(
) on the Group list, the Function menu
for “Group setting” is displayed.
2-touch dial?
You can show the list of Phonebook entries in memory number
[FOMA terminal only] 000 through 009.
Phonebook entries not yet stored or being set with secret are
displayed as ＜−−−＞.
Select an entry!d or Oo(
When the entry contains multiple phone numbers, or when you searched by “Mail
address?”, press Mo from the detailed display to select a phone number.
You can make a videophone call by pressing l(
) or PushTalk call by
pressing p.
93
Phonebook
When you select “
Group name”, enter a group name. You can store up to 10
full-pitch/21 half-pitch characters. However, you can store only up to 10
characters (regardless of full-pitch or half-pitch characters) when you enter both
full-pitch and half-pitch characters for a UIM group name.
See step 2 on page 88 for the operations of the other items. However, you cannot
set for groups on the UIM.
Select a stored group, or press i(
) and select “Check setting” to check
its settings. However, you cannot check the settings of the groups on the UIM.
Group?
Information
In a search method other than “Group?” and “2-touch dial?”, enter nothing and press
*Bo; then you can search all through the Phonebook.
When no Phonebook entry is found that matches the condition you entered by
“Reading?” or “Memory No.?”, the entry that is the closest to the condition is displayed.
Phonebook
Search order
The Phonebook entries are searched in the order of readings you entered for storing, as
follows:
“Space at the beginning of the reading” → “Japanese syllabary (ア、イ、
ウ、エ、オ、
... ン)”
→ “Alphabet (A, a, B, b, ...Z, z)” → “Numerals (0 through 9)” → “Symbols” → “No reading”.
For “All?” and “Reading?”, searching is done in the following order:
“Japanese syllabary (ア、イ、ウ、エ、オ、
... ン)” → “Alphabet (A, a, B, b, ...Z, z)” → “Space
at the beginning of the reading” → “Numerals (0 through 9)” → “Symbols” → “No reading”.
※The Memory No. Search searches in the order of the memory numbers.
About Phonebook List
When you search from “All?”, “Reading?”, “Group?”, or
“Memory No.?”, the tabs appear on the top of the Phonebook
list. With “All?” and “Reading?”, the entries are sorted by every
column of reading, with “Memory No.?” by every 100 of the
memory number, and with “Group?” by every group.
Press No to display the Phonebook entries in the tab at left or
Phonebook list
right. However, when there are 12 or more Phonebook entries
in a tab, pressing m(
), c(
), or brings up the previous or next
page.
After you search by “Reading?”, you can move the cursor to the “ア” through “ワ”, “英”,
and “他” tab by pressing each numeric key from the list. When you successively press
the same numeric key, you can move the cursor within the same column.
Press 5 to display the “ナ” tab. Each time you press 5, the cursor
moves to the top of “ニ” “ヌ” and so on.
After you search by “Group?”, you can move the cursor to the top of each column in the
tab by pressing each numeric key from the list. When you successively press the same
numeric key, you can move the cursor within the same column.
Press 5 to move the cursor to the top of the “ナ” column. Each time you
press 5, the cursor moves to the top of “ニ” “ヌ” and so on.
After you search by “Memory No.?”, you can move the cursor to the “000~” to “900~”
tab by pressing each numeric key from the list.
Press 5 to move the cursor to the “500~” tab.
You can make a voice call to the phone number stored for the name highlighted on the
Phonebook list, by pressing d. Also, press l(
) to make a videophone call
and press p to make a PushTalk call. When multiple phone numbers are stored for
the name, the one stored first will be dialed.
For the Phonebook entry stored on the UIM, “
” is displayed.
For the Phonebook entry stored with i-concier information, “
” is displayed.
“
” appears for the Phonebook entries set to A by Phonebook 2in1 Setting, “
”
appears for the Phonebook entries set to B, and “
” appears for the Phonebook
entries set to common data. (Only in Dual Mode)
When you refer to the Phonebook from a GPS compatible i-αppli program, “
”
appears for the Phonebook entries which contain the location information.
About the detailed display
Use No to highlight a tab, then the detailed contents are displayed.
For the Phonebook entry stored
Group
on the UIM, “ ” is displayed on
Reading
the memory number field.
Name
When Notify Caller ID is set to
Still image
Notify caller ID
“Notify caller”, “
” appears,
and when set to “Don’t notify”,
“
” appears.
Under the still image, “
”
appears for the Phonebook
entries set to A by Phonebook
2in1 Setting, “
” appears for
the Phonebook entries set to B,
and “
” appears for the
Detailed Phonebook
Phonebook entries set to
display (Item list)
common data. (Only in Dual
Mode)
When a Phonebook entry contains the setting for Multi Number or Chaku-moji, the set
contents are displayed in the Item list/Phone Number display.
Item list
The first stored phone number, mail address, postal address, birthday, and memo are
displayed. When i-concier information is stored, a postal address, URL, and memo
obtained from i-concier are displayed instead of a postal address, birthday, and memo.
Phone number
94
Memory No.
Mail address
When you select the item, you can compose an i-mode mail message with that mail
address entered into the address field.
i-concier information
When you select a postal address, the GPS compatible i-αppli program set by “Select
map” of “GPS settings” starts to show the map. When you highlight a postal address
and press l(
), the full display appears.
You can display a site or Internet website when you select a URL, select “i-mode
Browser” or “Full Browser”, and then select “YES”. When you highlight a URL and
press l(
), the full display appears.
When you select a memo, the full display appears.
If you have not subscribed to i-concier, the i-concier information tab does not appear.
Settings
When you select each item, a demo is played back.
Press Oo(
) or r to end the demo.
Function Menu of the Phonebook List
New
You can store a new Phonebook entry.
Go to step 1 on page 88.
Attach to mail
You can send an i-mode mail message with the
Phonebook entry attached.
Go to step 2 on page 142.
Search location
You can access the site of “イマドコかんたんサーチ
(imadoco kantan search)”.
!YES
Move/copy
Copy to microSD
See page 362.
Connect to Center
See page 137.
You can change the display order.
!Select a type of order.
You can sort Phonebook entries in reverse order by
selecting “Ascending” or “Descending”.
You cannot sort on the Phonebook list with tabs
displayed.
Change font size
You can switch font sizes for the Phonebook and on the
displays within “Phonebook settings”, etc.
(See “Phonebook” on page 118)
Send Ir/
trans/BT
Send Ir data
Send phonebook
See page 377.
Send all phonebook See page 378.
transmission
Send phonebook
See page 379.
Send all phonebook See page 379.
Send to Bluetooth
Send phonebook
You can send the Phonebook entry using Bluetooth
communication.
!Select a Bluetooth device to be sent!YES
When no Bluetooth devices are registered, the
confirmation display appears asking whether to search.
See page 415 for registering and connecting Bluetooth
devices.
Send all phonebook You can send all Phonebook entries using Bluetooth
communication.
!Select a Bluetooth device to be sent
!Enter your Terminal Security Code!YES
When “Session number setting” of “Bluetooth settings” is
set to “ON”, enter your Terminal Security Code and then
a session number.
When no Bluetooth devices are registered, the
confirmation display appears asking whether to search.
See page 415 for registering and connecting Bluetooth
devices.
95
Phonebook
Personal information
When you select a postal address, the GPS compatible i-αppli program set by “Select
map” of “GPS settings” starts to show the map. When you highlight a postal address
and press l(
), the full display appears.
When you select the location information, the Function menu of the location information
appears. (See page 323)
When you select a memo or still image, the full display appears.
Sort
Delete data
Store in P-Talk PB
See page 98.
Phonebook
Set secret/Release secret You can activate/deactivate Secret for the Phonebook
entry.
If you select “Set secret” in ordinary mode (not in “Secret
mode” or “Secret data only”), enter your Terminal
Security Code.
Information
You cannot send Phonebook entries from the UIM.
See page 412 for the Bluetooth function.
Move/copy
Copy to UIM
See page 410.
Copy to microSD
See page 362.
Copy to phone
See page 410.
Connect to Center
See page 137.
Copy item
Copy name
Notify caller ID
See page 56.
Prefix numbers
See page 60.
Int’l dial assist
See page 59.
Select image
See page 76.
2in1 dial
You can select a phone number to notify the other party in
Dual Mode of 2in1. (See page 444)
Multi number
You can select a phone number to be notified to the other
party. (See page 441)
Chaku-moji
See page 55.
Search location
See page 95.
Mail
Compose message
You can compose an i-mode mail message to send to the
mail address.
Go to step 3 on page 142.
Attach to mail
You can send an i-mode mail message with the
Phonebook entry attached.
Go to step 2 on page 142.
Compose SMS
You can compose an SMS message to send to the phone
number set as the destination address.
Go to step 3 on page 185.
Edit data
Edit phonebook
Go to step 1 on page 97.
Sort phone number/
Sort mail address
!Select a phone number or mail address
!Use Bo to change the order!Oo(
Change font size
You can switch the font size for the Phonebook and on the
displays within “Phonebook settings”, etc.
(See “Phonebook” on page 118)
Restrictions
See page 134.
From the detailed display, press No to highlight an
item to be sorted. The items you can select from the
Function menu differ depending on the highlighted
item.
To change the order in succession, repeat the above
steps.
96
You can copy the name of Phonebook entry.
Copy phone number/ You can copy each item of Phonebook entry.
Copy mail add./
From the detailed display, press Mo to highlight an item
Copy address/
to be copied. The items can be selected in the Function
Copy location info/
menu differ depending on the highlighted item.
Copy birthday/
Copy memo/Copy URL
Function Menu of the Detailed Phonebook Display
!l(
You can store the phone number in the PushTalk
Phonebook.
Secret code
!Enter a four-digit secret code!YES
In the Function menu, “Secret code” is indicated by “★”,
after it is set.
Enter a four-digit number for secret code. You cannot set
“0000”.
Set desktop/
key
Add desktop icon
long press set.
Send Ir/
See page 31.
See page 404.
Delete data
Information
You cannot set secret codes for UIM Phonebook entries.
The secret code can be added only when the recipient’s mail address is in the form of
“phone number” or “phone number@docomo.ne.jp”. It cannot be added to any other
form of mail address.
If you have stored the mail address as “phone number＋secret code@docomo.ne.jp”,
you cannot reply to mail messages from the party of that mail address. After changing
the mail address to “phone number@docomo.ne.jp”, set the secret code.
Editing Phonebook Entries
Send Ir data
See page 377.
Send all phonebook See page 378.
transmission
Send phonebook
See page 379.
Detailed Phonebook display!m(
!Select an item to be edited!Edit the contents.
See step 2 on page 88 for how to edit the Phonebook entry.
Even if you edit the Phonebook entry in the FOMA terminal (Phone), you can
remain the original contents in the original location and store the edited contents
in the different location by changing the memory number.
trans/BT
Send phonebook
See page 98.
Set secret/Release secret See page 96.
l(
)!YES
If you edited the UIM Phonebook entry, select “Overwrite” to overwrite the original
contents, or “Add” to save the contents as a new entry.
Send all phonebook See page 379.
Send to Bluetooth
Send phonebook
See page 95.
Send all phonebook See page 95.
97
Phonebook
You need to add the recipient’s secret code when sending
i-mode mail to anyone who has registered a secret code.
Once you set the secret code for the mail address in the
Phonebook entry, it will be added automatically whenever
you send mail to that address.
!Enter your Terminal Security Code!Set code
From the detailed display, press Mo to highlight a phone
number or mail address to be set with a secret code.
To check the secret code, select “Check code”.
To release the secret code, select “Release code”.
Deleting Phonebook Entries
Checking Phonebook Storage Status
Delete from the Detailed Phonebook Display
Detailed Phonebook display!i(
)!Delete data
!Do the following operations.
Phonebook
Phone number/
This item
!YES
Highlight an item to be deleted by pressing Mo from the
detailed display.
You cannot delete information obtained by i-concier.
This phonebook
!YES
Delete from the Phonebook List
Phonebook list!i(
)!Delete data
!Do the following operations.
Delete this
!YES
Delete selected
!Put a check mark for Phonebook entries to be deleted
!l(
)!YES
You can check or uncheck entries all at once by pressing
i(
) and selecting “Select all in tab/Select all/Release
all in tab/Release all”.
Perform the same operation as that of “Delete all” when you
have selected all Phonebook entries including secret ones.
Delete all in tab
You can delete all the Phonebook entries for the displayed tab.
!YES
Delete all
You can delete all Phonebook entries including secret entries.
!Enter your Terminal Security Code!YES!YES
Information
When you delete a Phonebook entry that is stored in the PushTalk Phonebook, the
PushTalk Phonebook entry is also deleted.
98
m!Phonebook!No. of phonebook
Phone
Phonebook . . .The number of Phonebook entries stored in the FOMA terminal
(Phone)
Secret . . . . . . .The number of Phonebook entries stored as secret data
(Displayed in Secret Mode or Secret Data Only)
Image. . . . . . . .The number of Phonebook entries in which still images are stored
Chara-den . . . .The number of Phonebook entries in which Chara-den images are
stored
PushTalk . . . . .The number of Phonebook entries stored in the PushTalk
Phonebook
Voice dial . . . . .The number of Phonebook entries set as voice dial entries
Rest . . . . . . . . .
: The number of phone numbers that can still be stored
: The number of mail addresses that can still be stored
UIM
Phonebook . . .The number of Phonebook entries stored on the UIM
Information
When you use 2in1, the number of Phonebook entries for the mode in use is
displayed. (See page 445)
<2-touch Dial>
Making a Call with a Few Keys Operation
When the entry is stored in memory number “000” through “009” in the
FOMA terminal’s Phonebook, you can dial the phone number just by
pressing the lowest one digit of memory number and d.
Numeric key (0 to 9)!d or Oo(
You can make a videophone call by pressing l(
pressing p.
) or a PushTalk call by
Information
The voice dial name set by this function is effective only for calling up a voice dial
entry. For the voice guidance function, the reading (name) stored in the Phonebook is
read aloud.
When multiple similar voice dial names are stored or when the voice dial name is
short, the recognition rate lowers and a wrong voice dial entry (Phonebook entry)
might be accessed. In this case, rename the existing voice dial name and store it.
You cannot store “ボイスセッテイ (Boisusettei)” as a voice dial name.
Accessing Phonebook Entries by Voice
Just vocalize the other party’s voice dial name and then the Phonebook
entry is accessed for making a call.
Voice Dial Setting
+m-2-6
You can store up to 100 voice dial entries selecting from among the
Phonebook entries stored in the FOMA terminal (Phone).
Dial from Phonebook by Voice
By your voice, you can access the Phonebook entry you set in the Voice
Dial list. When “Read aloud settings” is set to “ON” and “Voice dial” is
checked, the operation is guided by the voice guidance.
m!Phonebook!Phonebook settings
!Voice dial setting!
Start vocalizing within four seconds after the voice recognition start tone sounds.
Once the voice is recognized as a voice dial entry, the detected result is displayed.
You cannot change the volume of the voice recognition start tone. The voice
recognition start tone does not sound during Manner Mode.
If you say the word “ボイス設定 (Boisusettei)”, the display of “Voice settings”
appears. (See page 100)
When “Auto voice dial” is set to “ON”, the display for Auto Voice Dial appears
after the voice is recognized as a voice dial entry. Then about two seconds later,
the FOMA terminal automatically dials out.
You can edit the stored voice dial name by pressing l(
). Go to step 3.
To delete the stored voice dial entry, press i(
) and select “Delete” or
“Delete all” and then select “YES”.
Search the Phonebook!Select a Phonebook entry.
The display for search method you used last time appears.
The “★” mark is added to the Phonebook entry stored in the Voice Dial list.
Enter a voice dial name.
You can enter up to 22 half-pitch katakana characters.
The reading (katakana only) of the Phonebook entry is displayed as the voice dial
name. Correct the name to the easy-to-identify words.
d(for at least one second)
!As soon as the voice recognition start tone sounds,
vocalize the voice dial name.
Highlight a detected result and press"d or Oo(
).
The first phone number in the selected Phonebook entry is dialed.
You can show the detailed Phonebook display by pressing l(
).
Highlight a phone number and press d or Oo(
) to make a voice call.
Also, you can make a videophone call by pressing l(
) or a PushTalk
call by pressing p.
99
Phonebook
Information
When the Phonebook entry contains multiple phone numbers, the first phone number
will be dialed.
When you set “Restrict dialing” to a Phonebook entry of memory number 000 through
009, set it to the first phone number in the Phonebook entry.
When you store a Phonebook entry of memory number from 000 through 009 as
secret data, make a call to that entry in Secret Mode or Secret Data Only.
Phonebook
Information
When you vocalize, keep your mouth away from the microphone about 10 cm. If your
voice is too distant, it may be difficult to recognize your voice.
Pronounce the voice dial name as clearly as possible.
Before and after voice production, avoid making the sounds unrelated to the voice dial
name such as clearing your throat, clicking your tongue, noisy breathing or other
noise.
Vocalize in quiet, noise-free locations.
While vocalizing, do not put your fingers over the microphone, or press or brush the
keys.
To access a voice dial entry using an earphone/microphone
You need to set “Voice headset dial” to “ON” and open the FOMA
terminal in advance.
Press and hold the switch of the earphone/microphone
(option) for at least one second.
Perform the operations of “Dial from Phonebook by
Voice” on page 99.
You can make a call also by pressing the switch of the earphone/microphone
instead of pressing d or Oo.
To access a voice dial entry using a Bluetooth device
You need to set “Voice headset dial” to “ON” in advance, and connect
with the Bluetooth device using the Headset service or Hands-free
service.
For using the Hands-free service, the Bluetooth device needs to support a voice
recognition function.
Press the switch of the Bluetooth device.
Access a voice dial entry following the voice guidance.
Once the voice is recognized as a voice dial entry, the detected result is displayed.
The FOMA terminal automatically dials out about two seconds after the voice
guidance informing of dialing finishes.
100
Voice Settings
m!Set./Service!Other settings!Voice settings
!Do the following operations.
Auto voice dial
You can automatically make a call to the phone number
accessed by voice.
!ON or OFF
Voice headset dial
You can access the voice dial entries by using an earphone/
microphone (option) or Wireless Earphone Set 02 (option).
!ON or OFF
Read aloud settings See page 392.
Read aloud volume See page 393.
Read aloud speed
See page 393.
Read aloud output See page 393.
Read aloud valid
set.
See page 393.
Sound/Screen/Light Settings
Screen/Light Settings
Sound Settings
Changing Ring Tone. . . . . . . . . . . . . . . . . .
Setting Sound Effects of Ring Tone or Melody
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Informing You of an Incoming Call by Vibration . . .
Using Recorded Sound as Ring Tone . . .
Changing Ringback Tone . . . . . . . . . . .
Setting Keypad Sound . . . . . . . . . . . . . . . . . .
Setting Speed Selector Sound . . . .
Setting Charging-start/end Tones. . . . . . . . .
Sounding Alarm when a Line is Nearly Disconnecting
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting Ring Time for Mail and Messages R/F
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sounding Ring Tone from Earphone Only
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Muting Tones from FOMA Terminal . . . . . . . .
Selecting Manner Mode Type . . . . . . . . . .
102
103
104
104
104
105
105
105
105
106
106
106
107
Changing Displays . . . . . . . . . . . . . . . . . . . . . .
Displaying an Image Stored in Phonebook while Ringing
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Displaying Arrival Information by Opening FOMA Terminal
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting Lights for Display and Keypad . . . . . . . . . .
Adjusting Quality of Display Automatically . . . . . . . . .
Making Display Hard to See from People Around
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting Quality of Display . . . . . . . . . . . . . . . . .
Setting Color Combination for Display
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting Displays for Main Menu. . . . . . . . .
Using Kisekae Tool. . . . . . . . . . . . . . . . . . . . . . .
Setting Machi-chara Image . . . . . . . . . . . .
Setting Color and Others of Call/Charging Indicator
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing Character Font. . . . . . . . . . . . . . . . . . . . . . . . . .
Changing Font Size . . . . . . . . . . . . . . . . . . .
Setting Clock Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
109
111
111
112
113
113
113
113
114
114
115
115
117
118
118
101
+m-1-3
Changing Ring Tone
Sound/Screen/Light Settings
You can set a ring tone for each incoming type.
If you select an i-motion file, the i-motion file is played back with sound
for incoming calls/messages. (Chaku-motion)
The ring tone is the PCM sound source, chord of 128 tones, and ADPCM compliant.
See “Add to Phonebook” on page 88 for setting a ring tone by Phonebook entry, and
see “Group Setting” on page 92 for setting it by group.
■Ring Tone List (pre-installed)
Display
Pattern 1
Pattern 2
Pattern 3
Pattern 4
Pattern 5
Minimal Techno※
Gentle Morning
Title
Name of Lyricist/Composer
ー
ー
ー
ー
ー
ー
ー
ー
ー
ー
Minimal Techno
ー
Gentle Morning
ー
HEIGH HO // SNOW
HEIGH HO // SNOW
Composer:
WHITE AND THE
WHI
CHURCHILL FRANK E
SEVEN DWARFS /INST
Composer:
SONATINE※
SONATINE
WOLFGANG AMADEUS
MOZART
PARADE OF THE
PARADE OF THE
Composer:
※
WOODEN
WOODEN SOLDIERS
JESSEL LEON
Composer:
SUMMERTIME
SUMMERTIME
GERSHWIN GEORGE
SOMEDAY MY PRINCE SOMEDAY MY PRINCE Composer:
WI
WILL COME
CHURCHILL FRANK E
PEER GYNT SUITE NR
Composer:
PEER GYNT SUITE NR
1 OP 46/
GRIEG EDVARD HAGERUP
MORGENSTEMNING
Old Type Phone
ー
ー
Steelpan
ー
ー
KIRAKIRA
ー
ー
※
Minimal
ー
ー
※
Magical Stick
ー
ー
Smart Beep
ー
ー
102
Display
Ukulele
Waterdrop
Title
Name of Lyricist/Composer
ー
ー
ー
ー
※ 3D sound is supported. See page 103 for 3D sound.
(Note) The names of lyricists and composers are described conforming to the JASRAC
website.
Whole part of long titles may not be displayed due to restriction of the display
size.
■i-motion (pre-installed)
Display
Animals※
※ © 2009 GROOVISIONS
Title
Animals
Name of Lyricist/Composer
ー
m!Set./Service!Sound!Select ring tone
!Select an incoming type.
Select an item and press l(
back or displayed.
) to check the contents actually played
Select ring tone!Select a type of ring tone.
Select a folder!Select a ring tone.
Melody . . . . . . . . . . . Sets a melody as a ring tone.
MUSIC. . . . . . . . . . . . Sets a Chaku-uta Full® music file as a ring tone.
imotion . . . . . . . . . Sets an i-motion file as a ring tone. (Chaku-motion/
Chaku-uta®)
Voice announce . . . Sets the sound recorded by “Voice announce” as a ring
tone. The setting is completed.
OFF . . . . . . . . . . . . . . Sets a ring tone off. The setting is completed.
If you select “MUSIC” in step 2, select “Fullsong ring tone” or “Point ring tone”.
(See page 280)
See page 205 when you select “Search by i-mode”.
+m-6-4
Information
You can set the Call Receiving display by selecting “Phone” or “Videophone”, and
then by selecting “Select calling disp.”. Go to step 2 on page 110.
You can set the Mail Receiving display by selecting “Mail”, “Chat mail”, “MessageR” or
“MessageF”, and then by selecting “Select receiving disp.”. Go to step 2 of “Set
Stand-by Display” on page 109.
The priority order of ring tones is as follows: “Read aloud settings” → “Setting for
Phonebook entry” → “Group setting” → “Select ring tone” (“Select ring tone” of “Multi
number” when a call comes in to the additional number, and “Ring tone set. for No. B”
of “2in1 setting” when a call comes in to Number B while using 2in1).
The ring tone or images set at purchase might be played back or displayed for
incoming calls or messages, depending on the combination of this function and
“Display setting”.
See “imotion info” to check whether the i-motion file can be set for a ring tone.
When you set an i-motion file containing video and sound for a mail ring tone, you can
press -r or others to stop the ring tone.
When you set an i-motion file containing video and sound for a ring tone
(Chaku-motion), it is played back taking priority over “Display setting”. However, if you
set a voice-only i-motion file for the ring tone, the image set by “Display setting” is
displayed.
When you set an i-motion file containing video and sound for “Select calling disp.”, the
i-motion file is played back taking priority over this function for incoming calls.
However, if you set an i-motion file containing only video for “Select calling disp.”, the
ring tone selected for this function is played back for incoming calls.
You cannot set an i-motion file which contains video for “PushTalk” or “i-concier”.
When different types of mail — i-mode mail, SMS messages, chat mail, or Messages
R/F — are received at the same time, the priority order of ring tone as follows: “Chat
mail” → “i-mode mail/SMS” → “MessageR” → “MessageF”. If you receive the same
type of mail simultaneously, the ring tone corresponding to the mail you have received
last works.
For melodies downloaded, attached to mail, or prohibited from being attached to mail
or being output from the FOMA terminal, a playing part may be specified in advance.
When a play-part-specified melody is set for a ring tone, only the specified part is
played back.
Setting Sound Effects of Ring Tone or
Melody
You can set whether to add stereophonic sound effects to the playback
tone of i-motion files, melodies, ring tones, and effect tones.
m!Set./Service!Sound!Melody effect
!Do the following operations.
Stereo&3DSound
You can play back 3-dimensional sound from the Stereo
Earphone Set (option). This is effective for the i-αppli effect tones
or ring tones.
!ON or OFF
Position to play
You can set the play start position of the melody that has been set
for the ring tone or alarm tone.
!Select an item.
Play all. . . . . . . . Plays back from the beginning of the melody.
Play portion . . . Plays back from the start position set for the
melody.
3D Sound
3D Sound is a function that creates stereophonic sound and spatially-moving sound
through the use of the Stereo Earphone Set. 3D Sound compatible i-αppli games, ring
tones, and i-motion files enable you to enjoy live-like feeling of sounds.
Information
Stereognostic sense might differ depending on the person. If you feel strange, switch
“Stereo&3DSound” to “OFF”.
103
Sound/Screen/Light Settings
+m-5-4
Informing You of an Incoming Call by
Vibration
You can set the vibrator to notify you of incoming calls and mail.
Sound/Screen/Light Settings
m!Set./Service!Incoming call!Vibrator
!Select an incoming type!Select a vibration pattern.
When “Melody linkage” is set, the FOMA terminal vibrates in time with the
vibration pattern stored in the melody.
While selecting a vibration pattern, you can check the selected vibration.
However, you cannot check the vibration when you select “Melody linkage”.
The following icons are displayed on the Stand-by display while “Vibrator” is set to
other than “OFF”:
: You set “Phone”, “PushTalk”, or “Videophone”.
Using Recorded Sound as Ring Tone
You can set the sound recorded with the FOMA terminal for a ring tone
(including a ring tone for Number B of 2in1), On-hold tone/Holding tone,
alarm for “Alarm”, “Schedule”, “ToDo”, and “TV timer”, and answer
message for Record Message.
You can record only one item for about 15 seconds.
m!LifeKit!Rec.msg/voice memo!Voice announce
!Record
To suspend recording midway, press Oo(
), h, or r. The contents
recorded to that point are saved.
The tone beeps about 5 seconds before the recording time (for about 15
seconds) ends. When recording ends, the tone beeps twice, and the former
display returns.
The recording is suspended when a call comes in, when an alarm for “Alarm”,
“Schedule”, “ToDo”, “TV timer”, or “Timer recording” sounds, or when you switch
displays using Multitask while recording. (The contents recorded to that point are
saved.)
To play back the recorded sound, select “Play”. To suspend playback midway,
press Oo(
), h, or r.
To erase the recorded sound, select “Erase”, then select “YES”.
: You set “Mail”, “Chat mail”, “MessageR”, “MessageF”, or “i-concier”.
: You set “Phone”, “PushTalk”, or “Videophone”, and set “Mail”, “Chat mail”,
“MessageR”, “MessageF”, or “i-concier”.
Information
The priority order of vibrators is as follows: “Setting for Phonebook entry” → “Group
setting” → “Vibrator”.
Even when “Melody linkage” is set, the FOMA terminal vibrates with “Pattern 2” if an
i-motion file or melody with no vibration pattern is set for the ring tone.
Be careful not to leave the FOMA terminal on a desk or similar places with the vibrator
activated; when a call comes in, the FOMA terminal might move and fall by vibration.
+m-5-5
Changing Ringback Tone
Melody Call is a service that enables you to change the ringback tone
phone the callers hear to a melody you like.
For details, refer to “Mobile Phone User’s Guide [Network Services]”.
Melody Call is a pay service which is available on a subscription basis.
104
m!Set./Service!Incoming call!Melody Call setting
!YES!Operate following the instructions on the display.
Information
Melody Call is not available for incoming videophone calls and PushTalk calls.
When you select “YES” from the confirmation display asking whether to connect to the
site, the line is connected to the i-mode site. You are not charged a packet
communication fee for connecting to the site for settings, however, you are charged
for connecting to the IP site, i-mode menu site, and free melody corner.
+m-3-0
m!Set./Service!Sound!Keypad sound!ON or OFF
Information
You cannot change the volume for keypad sound.
If you set this function to “OFF”, the battery level tone (see page 43) and respective
warning tones do not sound.
The keypad does not make a sound when you press ., while the phone is
ringing, during playback of an i-motion file, or during playback of a movie file.
Setting Speed Selector Sound
m!Set./Service!Sound!Speed selector sound
!Select a pattern.
While selecting a pattern, you can check the selected sound.
Information
You cannot change the volume for speed selector sound.
The speed selector does not make a sound while the phone is ringing, during a call, or
during playback of an i-motion file, or during playback of a movie file.
m!Set./Service!Sound!Charge sound!ON or OFF
Information
You cannot change the volume for charge sound.
The charging confirmation tone does not sound when the power is turned off, when a
display other than the Stand-by display is shown or during Manner Mode or Public
mode (Drive mode).
+m-7-5
Sounding Alarm when a Line is Nearly
Disconnecting
When a call is nearly disconnecting midway due to bad radio wave
conditions, an alarm sounds to inform you right before disconnection.
m!Set./Service!Talk!Quality alarm
!Select an alarm.
No tone . . . . . Does not sound.
High tone. . . . High alarm sounds.
Low tone . . . . Low alarm sounds.
Information
You might be disconnected without hearing an alarm if radio wave conditions
deteriorate suddenly.
105
Sound/Screen/Light Settings
Setting Keypad Sound
Setting Charging-start/end Tones
The confirmation tone sounds twice when charging starts/ends.
+m-6-8
Setting Ring Time for Mail and Messages R/F
You can set the duration of the ring tone which sounds for incoming
i-mode mail, SMS messages, Chat mail, Messages R/F, and i-concier
information.
Sound/Screen/Light Settings
m!Set./Service!Sound!Mail/Msg. ring time
!Select a type of mail or message!ON or OFF
!Enter a ring time (seconds).
Enter in two digits from “01” through “30”.
+m-5-1
Sounding Ring Tone from Earphone Only
You can set from where you sound the ring tone and alarm for when you
connect an earphone/microphone (option).
m!Set./Service!Sound!Headset usage setting
!Headset and speaker or Headset only
Information
Even when you set to “Headset only”, the ring tone sounds from both the earphone
and speaker about 20 seconds after ringing starts. However, the tone does not sound
from the speaker but sounds from the earphone only even after 20 seconds have
elapsed if the tone sounds for the operations other than incoming calls, incoming mail,
and alarm notification.
Even when you set to “Headset only”, the tone sounds from the speaker when any
earphone/microphone is not connected or at the start of shooting with the camera.
Information
In the following cases, the tone sounds from the earphone when an earphone/
microphone is connected, and from the speaker when it is not connected, regardless
of this setting:
・While watching a 1Seg program
・During playback of a video file
・During playback of an i-motion file
・During playback of a movie file
・During playback of a melody
・While an i-αppli program is running
・During playback of a music file by MUSIC Player
・During playback of a Music&Video Channel program
Do not wind the cord of the earphone/microphone around the FOMA terminal.
The FOMA terminal may pick up noise if you take the cord of the earphone/
microphone close to the FOMA terminal during a call.
