Panasonic of North America 932CQ-US70G0 Bluetooth Module Assy User Manual Installation manual
Panasonic Corporation of North America Bluetooth Module Assy Installation manual
Installation manual
Installation Manual This PCB assy with Bluetooth is to be installed only by the professionals and used only with a Car Audio produced by Panasonic Col, Ltdl When this PCB assy with Bluetooth for car audio is installed in the Car Audio, we shall consider the following points; 1. Since Model “YEAPOIAOIIG”, “YEAP01A049’1 “YEAPOIAI 12” owns its FCC ID Number / lC Number, we shall affix an exterior label on the outside of the product if the FCC ID Number and IC Number are not visible. The exterior label shall use wording such as either ”Contained Transmitter Module FCC ID: ACJ932CQ»US7OGO” , “Contained Transmitter Module IC: 2161-CQUS70G0” or “Contained FCC ID: ACJ932CQ-US7OGO”, “Contained IC: 216J-CQUS70G0” 2. “YEAPO 1A0416”, “YEAPOIAOILQ”, “YEAPO lA1 12" complies with requirements of sub-sections 15 l9(a)(3) in FCC Rules Part 15 Subpart C. The manual statement (15.19 (a)(3) is included User Guide of the product. 3. “YEAPOIAOziG”, “Y'EAPOIAO49”, “YEAPOlAllZ” is to be installed only by the professronal line operator as shown in followmg pictures. (Fig l and 2) Fig 1. Rear side of “YEAPOIA046”, “YEAPOIA049”. "YEAP01A112” n i. ., Bluetooth Module Bluetonth Antenna Connecter Fig 1 Inside View of "YEAPOIAOLIG". “YE.~\P01A0119". “YEAPOIAIIZ” be equipped for a Car Audio (examplel) “YF APOIAO~1GT “YEAP01A049'1, “YEAPL)1A112" must be covered by metal shield. Fig 3. Top View of “YEAPOIAOALG”. Audio ( EAP01A049”. “YEAPOlAllT' be equipped for a Car mple) Fig 4 From View of “YEAPOIAOALG ‘ Audio (example) There isn’t an official user manual for this PCB assy with Bluetooth "YEAPO1A046", “YEAP01A049”, “YEAP01A112”. However, user manuals of final product which have the module, must contain notification corresponding to the following description. FCC WARNING Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Properly shielded a grounded cables and connectors must be used for connection to host computer and l or peripherals in order to meet FCC emission limits. (This device complies with Part 15 of FCC Rules and RSS-Gen of IC Rules.) Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter This equipment complies with FCC/IC radiation exposure limits set forth for uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that it deemed to comply without maxtmum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated with at least 200m and more between the radiator and person’s body (excluding extremities: hands, wrists, feet and ankles).
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Page Count : 4 Create Date : 2010:08:19 15:36:40+09:00 Modify Date : 2010:08:19 15:36:40+09:00 Creator : DocuCentre-III C4405 Producer : DocuCentre-III C4405EXIF Metadata provided by EXIF.tools