Panasonic of North America 932CR-BT4509 Bluetooth Module User Manual Exhibit E User Manual

Panasonic Corporation of North America Bluetooth Module Exhibit E User Manual

User manual

Weather Band ReceiverPP P/N PP105168Operating Instructions¡ Please read these instructions carefully before using this product and keep this manual for future reference.
2Safety InformationQ Read the operating instructions for the unit and all other components of your truck audio system carefully before using the system. They contain instructions about how to use the system in a safe and effective manner. We assume no responsibility for any problems resulting from failure to observe the instructions given in this manual.Q This manual uses pictographs to show you how to use the product safely and to alert you to potential dangers resulting from improper connections and operations. The meanings of the pictographs are explained below. It is important that you fully under-stand the meanings of the pictographs in order to use this manual and the system properly. WarningObserve the following warnings when using this unit.T The driver should not operate the system while driving. Watching the display or operating the system will distract the driver from looking ahead of the vehicle and can cause accidents. Always stop the vehicle in a safe location and use the parking brake before watching the display or operating the system. T Use the proper power supply. This product is designed for operation with a negative grounded 12 V DC battery system. Never operate this product with other battery systems, especially a 24 V DC battery system.T Do not disassemble or modify the unit. Do not disassemble, modify the unit or attempt to repair the product yourself. If the product needs to be repaired, consult your dealership.T Do not use the unit when it is out of order. If the unit is out of order (no power, no sound) or in an abnormal state (has foreign objects in it, is exposed to water, is smoking, or smells), turn it off immediately and consult your dealership.T Any NOAA broadcast weather report, including current and forecasts, may not reflect your actual weather conditions at your exact time and location. You should always pay attention to your actual weather conditions to make safe decisions accordingly.T Keep accessories out of reach of infants. Accessories can be ingested, so keep them out of the reach of infants. If an infant ingests accesso-ries, please seek immediate medical attention.Observe the following warnings when installing.T Disconnect the lead from the negative (–) bat-tery terminal before installation. Wiring and installation with the negative (–) battery terminal connected may cause electrical shock and injury due to a short circuit. Some cars equipped with the electrical safety system have specific procedures of battery terminal disconnection. FAILURE TO FOLLOW THE PROCEDURE MAY LEAD TO THE UNINTENDED ACTIVATION OF THE ELECTRICAL SAFETY SYSTEM RESULTING IN DAMAGE TO THE VEHICLE AND PERSONAL INJURY OR DEATH.T Never use safety-related components for installation, grounding, and other such func-tions. Do not use safety-related vehicle components (fuel tank, brake, suspension, steering wheel, pedals, airbag, etc.) for wiring or fixing the product or its accessories.T Check for piping, gasoline tank, electric wiring, and other items before installing the product. If you need to open a hole in the vehicle chassis to attach or wire the product, first check where the wire harness, gasoline tank, and electric wiring are located. Then open the hole from outside if pos-sible.T Never install the product in a location where it interferes with your field of vision.T Never have the power cord branched to supply other equipment with power.T After installation and wiring, you should check the normal operation of other electrical equip-ment. The continuation of their using in abnormal condi-tions may cause fire, electrical shock or a traffic accident.T Make sure the leads do not interfere with driv-ing or getting in and out of the vehicle.T Insulate all exposed wires to prevent short circuiting.This pictograph intends to alert you to the presence of important operating instructions and installation instructions. Failure to heed the instructions may result in severe injury or death.This pictograph intends to alert you to the presence of important operating instruc-tions and installation instructions. Failure to heed the instructions may result in injury or material damage.Warning Caution
3 CautionObserve the following cautions when using this unit.T Keep the sound volume at an appropriate level. Keep the volume level low enough to be aware of road and traffic conditions while driving.T This unit is designed for use exclusively in trucks.T Do not operate the unit for a prolonged period with the engine turned off. Operating the audio system for a long period of time with the engine turned off will drain the bat-tery.T Do not expose the unit to direct sunlight or excessive heat. Otherwise these will raise the interior temperature of the unit, and it may lead to smoke, fire, or other damage to the unit.T Do not use the product where it will be ex-posed to water, moisture, or dust. Exposure of the unit to water, moisture, or dust may lead to smoke, fire, or other damage to the unit. Make especially sure that the unit does not get wet in truck washes or on rainy days.T To ensure safety, never attempt to preset sta-tions while you are driving.T Depending upon the transmission condition of electro-magnetic waves, the geographical reasons and/or the weather conditions, you may not receive the NOAA radio partially or at all.T Make sure that your weather radio can receive properly before driving, especially, before use in a critical condition.T Set the volume level to low enough before the AUX connection is completed. Failure to observe this, the loud noise may come out and damage your speakers and your hearing. Direct connection of the speaker/headphone output of an external device without any attenuator may distort sound or damage the connected external device.T When using this unit, noise may occurs when there is an electromagnetic-wave generator such as a cellular phone near this unit, if that noise is obvious and cannot be eliminated, please keep an electromagnetic-wave genera-tor such as a cellular phone away from this unit.Observe the following cautions when installing.T Refer wiring and installation to qualified service personnel. Installation of this unit requires special skills and experience. For maximum safety, have it installed by the dealership. We are not liable for any problems resulting from your own installation of the unit.T Follow the instruction to install and wire the product. Not following the instructions to properly install and wire the product could cause an accident or fire.T Take care not to damage the leads. When wiring, take care not to damage the leads. Prevent them from getting caught in the vehicle chassis, screws, and moving parts such as seat rails. Do not scratch, pull, bend or twist the leads. Do not run them near heat sources or place heavy objects on them. If leads must be run over sharp metal edges, protect the leads by winding them with vinyl tape or similar protection.T Use the designated parts and tools for installa-tion. Use the supplied or designated parts and appropri-ate tools to install the product. The use of parts other than those supplied or designated may result in internal damage to the unit. Faulty installation may lead to an accident, a malfunction or fire.T Do not block the air vent or the cooling plate of the unit. Blocking these parts will cause the interior of the unit to overheat and will result in fire or other dam-age.T Do not install the product where it is exposed to strong vibrations or is unstable. Avoid slanted or strongly curved surfaces for installation. If the installation is not stable, the unit may fall down while driving and this can lead to an accident or injury.T Installation Angle The product should be installed in a horizontal posi-tion with the front end up at a convenient angle. The user should bear in mind that in some areas there may be restrictions on how and where this unit must be installed. Consult your dealer for further details.T Wear gloves for safety. Make sure that wiring is completed before installation.T To prevent damage to the unit, do not connect the power connector until the whole wiring is completed.T Do not connect more than one speaker to one set of speaker leads. (except for connecting to a tweeter)
4Safety Information (continued) CautionPLEASE FOLLOW THE LAWS AND REGULATIONS OF YOUR STATE, PROVINCE OR COUNTRY FOR WIRING, INSTALLATION, AND USE OF THIS UNIT AND THE DEVICES TO BE CONNECTED.The following applies only in the U.S.A.Part 15 of the FCC RulesFCC Warning:This device complies with Part 15 of the FCC Rules for Radio Receiver. Operation is subject to the condition that this device may not cause harmful interference. Any unauthorized changes or modifications to this equipment may void the user's authority to operate this device.IMPORTANT NOTE:To comply with the FCC RF exposure compliance requirements, no change to the antenna or the device is permitted. Any change to the antenna or the device could result in the device exceed-ing the RF exposure requirements and void user’s authority to operate the device.This transmitter must not be co-located or operated in conjunction with any other antenna or transmit-ter.This equipment complies with FCC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio frequency (RF) Expo-sure Guidelines in Supplement C to OET65. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated with at least 20 cm and more between the radiator and person’s body (excluding extremities: hands, wrists, feet and legs).NOTICEThis equipment has been tasted and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruc-tions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harm-ful interference to radio or television reception, which can be determined by turning the equip-ment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:¡ Reorient or relocate the receiving antenna¡ Increase the separation between the equipment and receiver.¡ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.¡ Consult the dealer or an experienced radio/ TV technician for help. CautionObserve the following cautions when using iPod®device/iPhone® model or USB device.¡ Do not connect a USB device directly to this unit. If the USB device is connected directly to this unit and an accident occurs, or if the brakes are applied suddenly, the driver or passenger may bump into the USB device and may get injured. ¡ Position the iPod device/iPhone model/USB device and USB extension cable so that they do not obstruct your driving. ¡ Do not connect any device other than iPod device/iPhone model/USB memory or a USB audio player. Do not connect multiple USB devices to the USB connector. Drawing power for multiple USB devices from the connector could cause overheating and smoking.
5ContentsSafety Information ........................ 2Contents .................................. 5Features .................................. 6Front AUX terminal (AUX1)Rear AUX terminal (AUX2)Sound controlCAN-readinessFault detection of external amplifierNon-volatile memoryIllumination Interlock Control30 days clock memoryBluetooth®USB connectorConnectable devices ..................... 7Compatible USB devicesControls Layout ........................... 8Preparation ................................ 9First time power onClock Display SettingClock adjustmentGeneral .................................... 10Power On/Off Source Selection Volume Adjustment Indication at connecting external amplifierSound Controls ...........................12Audio modes (Bass/Treble/Balance/Fader/SQ)Radio ......................................14Operation Flow Display Change Station Preset Manual preset memoryTuning in a weather band stationUSB (MP3/WMA) .........................16Notes for USB deviceCompatible USB devices Operation FlowDisplay changeRandom, Scan, Repeat PlayFor use with iPod ........................19Operation FlowDisplay changeSetting the iPod ControlRepeat, Shuffle PlayBluetooth® - General ....................22Registration of a Bluetooth® device to this unitDisplay changeSetting of PIN (Personal Identity Number) codeConnection of the registered Bluetooth® device to this unitDisconnection of the Bluetooth® deviceDeletion of the registered dataBluetooth® - Hands-Free Phone .......24Phone answering Phone hanging upSwitching between the private mode* and hands-free modeIncoming call rejectionOutgoing call terminationSetting of automatic answering function Use of voice dial Use of receiving/calling records or telephone directory (phonebook)Bluetooth® - Music Player ..............26Music mode activationSong selectionPauseNotes on Bluetooth® .....................27Frequency band usedUsage limitationsInfluence from other devicesApplication limitationsAlarm Setting .............................28Alarm time settingTurning ON/OFF the alarmActivating snoozeTroubleshooting .......................... 30If you suspect something wrongCommonRadioUSB (MP3/WMA)Bluetooth®Product servicingError Display Messages.................34USB (MP3/WMA)For use with iPodBluetooth®Notes on MP3/WMA .....................36Cautions as to compressed audio filesCautions as to the display of this unitRecording MP3/WMA Files on a USB-DeviceCopyrightNo warrantyMaintenance ..............................38Cleaning this unitSpecifications ............................39GeneralFM Stereo RadioAM RadioWeather Band RadioBluetooth®Specification from the Terminal End (Rear Connector of This Unit) ..........40
6FeaturesFront AUX terminal (AUX1)Your mobile audio player and other devices are con-nectable to this unit without any difficulty.Rear AUX terminal (AUX2)For more convenient connection, rear AUX terminals are now provided on the unit itself.Sound controlSQ (Sound Quality)You have four preset modes (FLAT, ROCK, POP and VOCAL). CAN-readinessThis unit is a CAN (Controller Area Network)-ready device that provides communication with a steering wheel remote control and other CAN-ready units. Fault detection of external amplifierWhen an anomaly of the connected external amplifier is detected, “AMP FAULT” text appears (the sound will be mute) and the power of this unit turned off after 6 seconds to remind taking inspection with the external amplifier.Non-volatile memoryThis unit stores the memories of each setting (tuner, audio, mode, alarm time settings even if the power supply is shut off or the power cable is unplugged. Illumination Interlock ControlThe intensity/illumination of display and button on this unit is controlled by a PWM dimming module located in the vehicle.This unit is connected in the vehicle to dimming analog signal (PWM signal). It’s capable of dimming the backlighting based on a voltage supplied by a PWM dimming module.30 days clock memoryThis unit stores the memory of clock time for 30days even if the power supply is shut off or thepower cable is unplugged.Bluetooth®This feature allows users to use a hands-free phone and Bluetooth® audio systems.Compatible Bluetooth® devices¡ Bluetooth® Version: 2.1+EDR¡ HFP1.5 (Hands-Free Profile)¡ OPP (Object Push Profile)¡ A2DP (Advanced Audio Distribution Profile) v 1.2¡ AVRCP1.0 (Audio/Video Remote Control Profile)¡ HSP v 1.1 (Headset Profile)USB connectorThe USB connector is equipped on the front panel.By connecting a USB memory (not included) to the USB connector via a USB extension cable (USB 2.0, not included), you can enjoy MP3/WMA files stored on the USB memory (not included) in your vehicle.By connecting for iPod devices/iPhone models to USB connector via a USB extension cable for iPod devices and iPhone models (USB 2.0, not included), you can enjoy music files stored on the compatible with iPod devices and iPhone models in your vehicle. Further information about the compatible with iPod devices and iPhone models is described below.* iPhone, iPod, iPod classic, iPod nano, iPod shuffle, and iPod touch are trademarks of Apple Inc., regis-tered in the U.S. and other countries. “Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to con-nect specifically to iPod or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod or iPhone may affect wireless performance.
7Compatible USB devices¡ USB Mass Storage ClassFor details as to whether your USB memory/USB Audio is compatible with USB Mass Stor-age Class, please contact the USB memory/USB Audio manufacturer. CautionWe do not guarantee all of the USB devices (USB memory/USB audio player) on market are compatible and playable with this unit, some exceptional USB devices may have operation problem when connected to this unit. If such problem occurs, please check and contact the USB device manufacturer for its compatible information. ¡ USB Standard Compatibility 1.1/2.0 Full Speed¡ File System FAT12/16/32¡ Maximum current less than 1 A¡ Recommended capacity/partition: Less than 32 GB/Only supported for 1 partition.iPod compatibilityThis unit supports only the following iPod models. Supported iPod models are shown below. Older models can not be supported.Made for.¡ iPod touch (4th generation)¡ iPod touch (3rd generation)¡ iPod touch (2nd generation)¡ iPod touch (1st generation)¡ iPod classic (160 GB only)¡ iPod classic (120 GB only)¡ iPod classic¡ iPod nano (6th generation)¡ iPod nano (5th generation)¡ iPod nano (4th generation)¡ iPod nano (3rd generation)Made for.¡ iPhone 4S¡ iPhone 4¡ iPhone 3GS¡ iPhone 3G¡ iPhone* Operation check has been completed with software available at the end of December, 2013. We do not guarantee the operation with our future products or upgraded software. CautionCorrect function of iPhone 5, iPod touch (5th generation) and iPod nano (7th generation) can not be guaranteed when connected to this unit.Connectable devices
8Controls LayoutBAND (a page 14, 15, 23, 24, 25)y / 5 Pause/Play (a page 16, 19, 26)APM Auto Preset Memory(a page 14)DISP Display (a page 9, 14, 17, 20, 22)CLOCK (a page 9)AUXFrom line output of external sound/audio device (ex. Silicon-audio player, HDD player, etc.)TUNE/SEEK {/} (a page 14, 15)FILE (File/Number) s/d (a page 16, 19, 23, 24, 26, 28)1 through 6 (Preset Buttons) (a page 14, 15, 22, )SCROLL (a page 17, 20)SCAN /iPod(a page 18, 20)REPEAT/RANDOM (a page 18, 21)FOLDER {/} (a page 16, 19)VOL Volume(a page 11, 12)ALM Alarm(a page 28)PUSH SEL Select (a page 9, 12, 19, 22, 23, 25, 28)PHONE (a page 24, 25)SRC Source (a page 10, 14, 16, 19, 23)POWER (a page 10)page 24, 25)
9PreparationFirst time power on1 Turn the key in the ignition until the ac-cessory indicator lights.2 Press [POWER].Clock Display Setting1 Hold down [DISP](CLOCK) for more than 2 seconds to adjust clock setting. 2 Press [SEL] to open the clock display setting display. 3 Press [d] or [s] to adjust.the 24-hour system used (default) cdthe 12-hour system used4 Press [SEL] to determine the setting. Notes: ¡ If no operation takes place for more than 5 seconds in the clock display setting, the display returns to the regular mode.¡ To exit from the clock display setting, press [DISP].Clock adjustment*The 12-hour system is used for example.1 Press [DISP](CLOCK).(Clock display)2 Hold down [DISP](CLOCK) for more than 2 seconds.*Indicator for AM or PM timeHour blinks 3 Adjust the hour.[d] : Sets ahead.[s] : Sets back.Hour entered4 Press [DISP](CLOCK).Minute blinks5 Adjust the minute.[d] : Sets ahead.[s] : Sets back.Minute entered6 Press [DISP](CLOCK).Completed Notes: ¡ Clock time is displayed when the unit is power off.¡ “CLOCK ADJUST” is displayed when the clock is not adjusted.¡ Hold down [d] or [s] to change numbers rapidly.¡ When you want to readjust the time, repeat steps 2 to 6.
10GeneralPower On/Off Set your car’s ignition switch to the ACC or ON position. Power on: Press [POWER].Power off: Hold down [POWER] for more than 1 second.One-Hour Timer With the ignition off, pressing the [POWER] on this unit will turn on the receiver and activate the receiver’s one-hour timer. The receiver will turn off automatically after one hour.Source Selection Press [SRC] to change the source. When device connected to the front AUX terminal of this unit, the sound of connected audio device can be output from car speakers. AUX2When device connected to the rear AUX terminal of this unit, the sound of connected audio device can be output from car speakers. Bluetooth®(a page 22)(Return to “RADIO”)Notes:¡ When an output signal from the rear AUX terminal is detected, this unit automatically changes the source to AUX2. If this unit no longer detects this input signal, the source immediately before AUX2 resumes.¡ When an output signal from the rear AUX terminal is detected in the power-off mode of this unit, the power is turned on with the AUX2 source selected. If this unit no longer detects this input signal be-fore manually selecting other sources, the power of this unit is turned off.AUX Connector (3.5 mm ø stereo) From line output of external sound/audio device (ex. Silicon audio player, HDD player, etc.) [SRC] selects a source. [POWER] toggles power on/off. [VOL] (Volume) dRadio(a page 14)USB (a page 16)iPod (a page 19)AUX1dddddWhen no external device is connected to rear AUX terminal, “AUX” is displayed, and press [SRC] to return to “RADIO”p
11Volume Adjustment (Setting Range: 0 to 40, Default: 18) Turn [VOL] clockwise to increase the vol-ume, and counterclockwise to decrease the volume. Indication at connecting external amplifier lights when an external amplifier is con-nected. Note: When an anomaly of the external amplifier is detected, “AMP FAULT” appears (the sound will be mute/ blinks repeatedly) and the power of this unit is turned off after 6 seconds. When an external amplifier is connected, the adjust-able volume level: 0 to 33 (Maximum).UpDown
12Sound Controls[VOL] selects a value in the audio menu. (PUSH SEL: Select)selects items in the audio menu. Audio modes (Bass/Treble/Balance/Fader/SQ)1 Push [SEL] (Select) to select the audio mode in sequence. 2 Turn [VOL] (Volume) clock-wise or counterclockwise to change each level or select a setting.VolumeBassTrebleBalanceFaderq: Upw: Downq: Increasedw: Decreasedq: Increasedw: Decreasedq: Right enhancedw: Left enhancedq: Front enhancedw: Rear enhanced(Setting Range: 0 to 40, default: 18)(Setting Range: –12 dB to +12 dB by 2 dB, default: 0 dB)(Setting Range: –12 dB to +12 dB by 2 dB, default: 0 dB)(Setting Range: 15 levels each and CENTER, default: CENTER)(Setting Range: 15 levels each and CENTER, default: CENTER)Note: If no operation takes place for more than 5 seconds in audio mode (2 seconds in volume mode), the display returns to the regular mode.
13(FLAT) flat frequency response:does not emphasize any part. (default)(ROCK) speedy and heavy sound:exaggerates bass and treble.(POP) wide-ranged and deep sound:slightly emphasizes bass and treble.(VOCAL) clear sound:emphasizes middle tone and slightly emphasizes treble.SQ (Sound Quality)q, w: SelectSQ is a function that can call up various sound types at the touch of button in accordance with your listen-ing music type.(Selectable setting: FLAT/ROCK/POP/VOCAL default: FLAT)Note: Settings of SQ, bass and treble are influenced one another. If such an influence causes distortion to the audio signal, readjust bass/treble or volume.
14Radio (FM stereo) indicatorlights while receiving an FM stereo signal.Operation Flow 1 Press [SRC] to select the radio source. 2 Press [BAND] to select a band.Weather Band(a page 15)3 Select a station. Frequency Adjustment [TUNE{]: Lower / [TUNE}]: Higher Note: For station search, hold down either of the but-tons for more than 0.5 seconds and release it.Preset Station Selection Press the corresponding preset button from [1] through [6] to tune in a preset station. Display Change Press [DISP] to change the display. Radio mode display (Frequency) Clock display Station Preset The 6 stations with good reception will be automati-cally saved in the memory under preset buttons [1] through [6].Preset stations can be simply called up by pressing [1] through [6]. Auto Preset Memory (APM) With this operation, stations with good receiving conditions can be automatically stored in the preset memory. 1 Select a band. 2 Hold down [BAND] (APM) for more than 2 seconds. The preset stations under best receiving condi-tions are received for 5 seconds each after preset-ting the stations (SCAN). To stop scanning, press one of the buttons from [1] through [6]. Note: New stations overwrite existing saved stations. CautionTo ensure safety, never at-tempt to preset stations while you are driving.[SRC] selects a source. [DISP] (Display) switches the information on the display. [BAND] selects a band in the radio source. (APM) (Auto Preset Memory) executes APM in the radio source (by hold-ing it down for more than 2 seconds).[TUNE}] / [TUNE{]increases/decreases the fre-quency. (For seek tuning, hold it down for more than 0.5 seconds and release it.)Preset buttons [1] through [6] select a preset station in the radio source, preset the current station (by holding it down for more than 2 seconds).on tcd
15Manual preset memory1 Use manual or seek tuning to find a station.2 Press and hold one of the preset but-tons [1] through [6] until the display blinks once.Preset Numberblinks onceNote: New stations overwrite existing saved stationsTuning in a weather band station1 Press [BAND] to select WB (Weather Band). (a page 14)2 Press any of the buttons [1] through [6] to monitor the preset station.Note: The weather band (CH1-6) has been preset. CH7 is selected by pressing [TUNE}] or [TUNE{].Weather Band Frequency (channel) NumberWeather Band Frequency Weather Band StationsNational Weather Radio Broadcasts from over 380 Iocations throughout the U.S. on seven VHF/FM frequencies.Tune to weather band to receive continuous weather information 24 hours a day on one of the following frequencies.1. 162.400 MHz2. 162.425 MHz3. 162.450 MHz4. 162.475 MHz5. 162.500 MHz6. 162.525 MHz7. 162.550 MHzNote: Further and updated information about the National Weather Radio station listing, please visit the web site: http://www.nws.noaa.gov/nwr/nwrbro.htmOccasionally the frequency of an existing or planned station must be changed because of unexpected radio frequency interfere with adjacent NOAA weather Radio Stations and/or with other Government or commercial Operations within the area. If you have a question concerning NOAA Weather Radio, please contact your nearest National Weather Service Office. WarningAny NOAA broadcast weather report, includ-ing current and forecasts, may not reflect your actual weather conditions at your exact time and location. You should always pay attention to your actual weather conditions to make safe decisions accordingly.
16USB (MP3/WMA)Notes for USB device¡ This unit plays back MP3/WMA files stored on a USB memory. ¡ Back up any important data beforehand. We can-not accept responsibility for any lost data. ¡ Refer to the section on “Compatible USB devices” (a below). ¡ Refer to the section on “Notes on MP3/WMA”. ¡ Connect your USB device to your car audio using a standard USB extension cable. Use of a 2 m or shorter USB 2.0 cable is recommended. Caution for USB Device ¡ Do not connect a USB device directly to this unit. If the USB device is connected directly to this unit and an accident occurs, or if the brakes are applied suddenly, the driver or pas-senger may bump into the USB device and may get injured. ¡ Position the USB device and USB extension cable/ optional adaptor so that they do not obstruct your driving. ¡ Do not connect any USB device other than a USB memory or a USB audio player. Do not connect multiple USB devices to the USB con-nector. Drawing power for multiple USB devices from the connector could cause overheating and smoking. Compatible USB devices ¡ USB Mass Storage Class This refers to a type of USB device, which when connected to a PC can be used as a storage device without the need for specialized drivers or software. For details as to whether your USB memory/USB Audio is compatible with USB Mass Storage Class, please contact the USB memory/USB Audio manufacturer. ¡ USB Standard Compatibility 1.1/2.0 Full Speed ¡ File system is FAT12/16/32 ¡ Maximum current less than 1 A ¡ Recommended capacity/partition: Less than 32 GB/Only supported for 1 partition.Notes: ¡ The use of USB devices that contain data files other than MP3/WMA stored is not recommended. ¡ Playback or display may not be possible depend-ing on the type of the USB device or the condition of the recording. ¡ Even if PC playback is possible, it may not be pos-sible on this product, because some USB devices are not compliant with the USB standard. ¡ Even with a USB device in the Mass Storage Class, playback may not be possible in some cases. Operation Flow1 Press [SRC] to select the USB mode. 2 Open the USB connector cover. 3 Using a USB extension cable, connect the USB memory to this unit. Notes: ¡ When connecting (disconnecting) the USB memory, turn down the volume of the unit. ¡ When connecting the cables, make sure the con-nector is pushed all the way into the socket. ¡ This unit may not operate correctly, depending on USB cable’s quality and length. Use of a 2 m or shorter USB 2.0 cable is recommended. Notes: ¡MP3/WMA files recognized by the unit are played back automatically. ¡If the USB memory is connected to this unit when the power is turned on, playback starts automati-cally.4 Select a desired portion. Folder Selection [}] (FOLDER): Next folder [{] (FOLDER): Preceding folder File Selection [7]: Next file [6]: Preceding file (press twice) Note: For fast forward/reverse, hold down either of them.Pause Press [BAND] (h/ 5). Press again to cancel.
17USB (Universal Serial Bus) Con-nector (inside of the cover)[4] (SCAN)/[5] (REPEAT)/[6] (RANDOM) toggles on/off each play mode. [3] (SCROLL) scrolls the information on the display. [{] [}] (FOLDER) skips to the previous/next folder. [SRC] selects a source. [DISP] (Display) switches the information on the display. [BAND] (h/ 5) (Pause/Play) toggles between pause and play with the USB source. [6] [7] skip to the previous/next file in the USB mode. For fast reverse/fast forward, hold down either of them. (Repeat)/ (Random)/ (Folder)indicator indicatorlights when a USB device is loaded.Display changePress [DISP] to change the display.Notes:¡ For scrolling text, press [3](SCROLL).¡ “NO TEXT” is displayed when there is no informa-tion on the USB.* ID3 Tag ON/OFFHold down [3](SCROLL) for more than 2 seconds.TAG ON: album title and song title/artist name are displayed.TAG OFF: folder name/file name are displayed. (Default)Folder number/File numberPlay timeFolder name/ Album*File name/Title, artist*Clock( lights.)( lights.)
18USB (MP3/WMA) (continued)Random, Scan, Repeat PlayRandom Play SettingPress [6] (RANDOM) to select the random play setting. Random playAll the available songs (files) are played in a random sequence. ( lights.) dPress [6] (RANDOM) again to select the folder random play. Folder random play All the available files in the current folder are played in a random sequence. ( , lights.) dPress [6] (RANDOM) again to turn off random play. Random offReturn to regular play.Scan Play SettingPress [4] (SCAN) to select the scan play setting.Scan playThe first 10 seconds of each song (each file) is played in sequence. dPress [4] (SCAN) again to select the folder scan play. Folder scan playFrom the next folder, the first 10 seconds of the first file in each folder is played in se-quence. ( lights.) dPress [4] (SCAN) again to turn off scan play. Scan offReturn to regular play.Repeat Play SettingPress [5] (REPEAT) to select the repeat play setting. Repeat play The current song (file) is repeated. ( lights.) dPress [5] (REPEAT) again to select the folder repeat play. Folder repeat play The current folder is repeated. ( , lights.) dPress [5] (REPEAT) again to turn off repeat play. Repeat offReturn to regular play.
19Operation Flow1 Connect an iPod. 2 Press [SRC] to select the iPod (USB) mode. Playback starts. Note: If playback does not start, press [BAND] (h/ 5). File Selection [7]: Next file [6]: Beginning of the current file For the preceding file, press twice. Notes: ¡ Hold down for fast forward/reverse. ¡ When fast forward comes to the end of a file or fast reverse comes to the beginning of a file, regular playback starts when the fast forward or reverse button is released. Pause Press [BAND] (h/ 5). Press again to cancel. Playing Mode Selection 1 Press [2] (FOLDER}) to activate the Playing Mode Selection mode. 2 Turn [VOL] clockwise or counterclock-wise to adjust. PLAYLIST: Playback by playlist (Default) ARTIST: Playback by artist ALBUM: Playback by album GENRE: Playback by genre 3 Press [VOL] (PUSH SEL) to determine the selection. 4 Turn [VOL] clockwise or counterclock-wise to select a portion to be played. 5 Press [VOL] (PUSH SEL) to determine the selection. Notes: ¡ To exit the selection, press [DISP]. ¡ Files without an album name or an artist name are not playable in the playing mode of the album or artist display respectively. ¡ Playing Mode Selection is not available when this unit is switch to iPod control mode.By connecting compatible with iPod devices to USB connector via a USB extension cable for iPod (USB 2.0, not included), you can enjoy music files stored on the compatible with iPod devices in your vehicle.Note: Refer to the section on “USB (MP3/WMA)” for connection.[VOL] selects a value in the Playing Mode Selection mode. (PUSH SEL :Select)selects items in the Playing Mode Selection mode. USB (Universal Serial Bus) Con-nector (inside of the cover)[2] (FOLDER}) activates the Playing Mode Selection mode.[SRC] selects a source. [DISP] (Display) switches the information on the display. [BAND] (h/ 5)(Pause/Play) toggles between pause and play with the iPod source.[6] [7] skip to the previous/next file in the player mode. For fast reverse/fast forward, hold down either of them. (Repeat)/ (Random) indicator / indicatorlights when a USB extension cable for iPod and iPod devices is connected with USB connector and the USB source is selected.iPod indicator blinks when “iPod control mode” is selected.For use with iPod
20Display changePress [DISP] to change the display.Notes:¡ For scrolling text, press [3](SCROLL).¡ “NO TEXT” is displayed when there is no informa-tion on iPod.Setting the iPod ControlWhen an iPod/iPhone is connected, operate it from its own controls or from this head unit can be select-able.Press [4] (SCAN) to switch iPod control mode between this head unit and iPod. iPod mode (Default):Operate the iPod/iPhone playback via this head unit. cd iPod control mode:Operate the iPod/iPhone playback using its own controls.Note: The iPod control mode (function) may not be operated/supported on the models other than compatible models listed on page 7. Please note the controllable function under “iPod Mode” and “iPod Control Mode” on head unit may vary with iPod models.Song number/Total songPlay timeSong nameArtist nameClockAlbum name( lights.)( lights.)( lights.)For use with iPod (continued)USB (Universal Serial Bus) Con-nector (inside of the cover)[3] (SCROLL) scrolls the information on the display. [4](SCAN/iPod)toggles iPod control mode between head unit and iPod.[5] (REPEAT)/ [6] (RANDOM) toggles on/off each play mode. [DISP] (Display) switches the information on the display. (Repeat)/ (Random) indicatorpy
21Notes: ¡ The Album shuffle play function is only available when the unit is switch to iPod control mode or controlled directly by iPod devices. Album shuffle function is available depending on the connected iPod/iPhone equipped with album shuffle function.¡ When the last selected play list with the iPod is song, song shuffle play is activated, and when it is album, album shuffle play is activated. dPress [6] (RANDOM) again to turn off shuffle play. Shuffle offReturn to regular play.Note: Depending on the connected iPod/iPhone, repeat play or random play function or display may differ from this unit and your iPod/iPhone.Repeat, Shuffle PlayRepeat Play SettingPress [5] (REPEAT) to select the repeat play setting. One song repeat playThe current file is repeated. ( lights.) dPress [5] (REPEAT) again to select the all songs repeat play. All songs repeat playThe all playable songs are repeated.( blinks.) dPress [5] (REPEAT) again to turn off repeat play. Repeat play offReturn to regular play.Note: When using iPod nano (4th generation) and this unit is under iPod control mode, the “IPOD CTRL <IPOD>” is always displayed on this unit when select repeat play setting from this unit. The repeat play setting is functional even without above corresponded display.Shuffle Play SettingThe shuffle function of an iPod corresponds to the RANDOM function of this unit. Press [6] (RANDOM) to select the shuffle play setting. SongsAll the available files are played in a random se-quence. ( lights.) dPress [6] (RANDOM) again to select the album shuffle play. AlbumsAll the playable albums are played in a random sequence. ( blinks.) Notes:¡ The shuffle function for iPod corresponds to the RANDOM function of this unit.¡ Please make sure to detach the iPod after turning off the vehicle engine (turning the ACC to OFF). The iPod devices may not shut down while still connected, which may result in bat-tery depletion.¡ Please do not connect for iPod accessories such as for iPod remote control unit or head-phones while connecting for iPod with the unit. The unit may not operate correctly.¡ Connect this unit after turning down the vol-ume for the iPod.¡ “AUTHENTICATING” appears until for iPod is recognized after connecting for iPod. This indicates there is nothing wrong with the main unit.¡ We do not guarantee all the operations of con-nectable devices.¡ If your iPod or iPhone is not working correctly, disconnect it from this unit, reset it and then reconnect it to this unit.¡ The iPod/iPhone will be recharged while con-nected to this unit.
22Bluetooth® - General (Bluetooth®) indicatorlights when a Bluetooth® device is connected, and blinks during a call.Registration number (M1 – M8)Registration of a Bluetooth® device to this unit1 Press one of the preset buttons from [1] through [6] to select a registration number assigned to the Bluetooth® device to be registered.Note: Up to 8 devices memory registered with preset buttons.[1] – [5] : Selects a registration number (1st page: 1 – 5, 2nd page: 6 – 8)[6] : Turns the registration pagesFor registration No.6: press [6], then press [1].For registration No.7: press [6], then press [2].For registration No.8: press [6], then press [3].2 Hold down the selected preset button for more than 2 seconds.3 Push [SEL] (Select) to make this unit standby for registration with waiting status.Note: To exit waiting status, press [DISP].4 Operate your Bluetooth® device to input the PIN code for connection. (Default PIN code is “0000”) Once pairing/registration is successful, the registered Bluetooth® device can automatically communicate with this unit.Notes:¡ The text display of Bluetooth® device name and telephone directory on this unit is only sup-ported with English characters, other languages and undisplayable characters/symbols will be converted into an asterisk (*).¡ If registration is not successfully completed within 1 minute, “TIME OUT” appears and the screen for registration number selection resumes. ¡ If registration fails because of mismatched PIN code, “B/T PIN ERR” appears and the screen for registration number selection resumes. ¡ Depending on the communication status, it may takes 5 to 40 seconds for device connection.Note on operation:Some Bluetooth® devices/Phones may not connect to this unit or, even when connected, the operation method, displays, and functions may differ from the instructions within this manual. For the Bluetooth® devices/Phones to be supported with this unit, please visit/consult your dealer to verify compatibility of your Bluetooth® devices or phones.Display changePress [DISP] (Display) to change the display. Registered device name (Example) Clock[DISP] (Display) switches the informa-tion on the display. [SRC] selects a source. [BAND]connect, or discon-nect a Bluetooth® device.[PUSH SEL]deletes the registration data.makes this unit standby for registration.[1] through [6] (preset buttons)selects a registration number of a Bluetooth® device.[6]: sets the PIN code.[s]/[d]selects a number.ns) (Signal) indicatorlights when a cellular phone is paired and connected, indicates the intensity of cellular phone’s signal wave.one is paired and connected, cellular phone’s signal wave.
23Notes:¡ We shall not guarantee all the functions of the Bluetooth® device to be connected. When opera-tions cannot be performed via this unit, operate the system via the Bluetooth® device. ¡ Be aware that the battery of a Bluetooth® device drains faster if the Bluetooth® device is con-nected to this unit.¡ Even when the Bluetooth® device that is con-nected to this unit is located near this unit, sound may be interrupted or noise may be generated.¡ The Bluetooth® device with over 5-digit PIN code is not operated with this unit.¡ “B/T DISCOND is displayed when the Bluetooth® device is disconnected.Setting of PIN (Personal Identity Number) code1 Hold down [6] for more than 2 seconds to call the PIN code entry mode. 2 Press [6] to prepare for adjustment. 1st digit blinks3 Enter a number for each digit.[s] / [d] : Selects number (0 – 9).[6] : Selects next digit to be entered. Digit entered4 Press [6] to determine the PIN code entry when last digit is entered. CompletedNote: To check the Bluetooth® address of this head unit, press [SEL] after step 1.Connection of the registered Bluetooth® device to this unit1 Press the preset button(s) [1] through [6] to select the registration number of the Bluetooth® device of interest. (Refer to the above.) 2 Hold down [BAND] for more than 2 seconds for connection. The Bluetooth® indicator ( ) lights. Notes:¡ Even if [SRC] (Source) is pressed to change the source, the connection stays connected. ¡ Depending on the communication status, it may takes 5 to 40 seconds for device connection.Disconnection of the Bluetooth® deviceHold down [BAND] for more than 2 seconds. The Bluetooth® indicator ( ) turns off. Note: When the Bluetooth® device is out of reception range or encounter serious interference by outer signal, “ERROR” appears and this unit will automati-cally disconnect the connections.Deletion of the registered data1 Press the preset button(s) [1] through [6] to select a registration number as-signed to the Bluetooth® device whose data is to be deleted. (Refer to the above.) 2 Hold down the preset button [1] through [5] selected above for the registration number for more than 2 seconds. 3 Press the preset button that was pressed at the step above again. 4 Push [SEL]. Deletion completed
24Bluetooth® - Hands-Free PhonePhone answering Press [PHONE] during a call incoming. The Bluetooth® indicator ( ) blinks during a call incoming/making a call. Notes:¡ During a call incoming, the volume of this unit automatically switches to 18, it restores to the original volume setting when phone answering or call rejecting.¡ If the automatic answering function is activated, conversation can be automatically started after receiving a call. (Refer to the below.)Phone hanging upPress [PHONE] during a call.Switching between the private mode* and hands-free modePress [BAND] during a call. The private mode and hands-free mode switch alter-nately every time [BAND] is pressed.    (Private mode) (Hands-free mode)* The private mode is defined as the mode where conversation is conducted with the mobile phone in a usual manner without the hands-free function. Incoming call rejectionHold down [PHONE] for more than 2 sec-onds during a call incoming. Outgoing call termination Hold down [PHONE] for more than 2 sec-onds during making a call. (When other party does not answer the call.) Setting of automatic answering function Hold down [PHONE] for more than 2 sec-onds at the standby state. The automatic answering function toggles between ON and OFF every time [PHONE] is held down for more than 2 seconds. (Automatic answering deactivated) (Automatic answering activated)Use of voice dial 1 Hold down [d] for more than 2 sec-onds at the standby state. 2 Pronounce the name registered on the telephone directory. If the name matches with a piece of data on the telephone directory registered with the mobile phone, the telephone number of the name is dialed. Note: The Bluetooth® mobile phone itself must be equipped and support voice dial function.[PHONE] picks up the phone, makes a call, or rejects the call.[VOL] switch the record(PUSH SEL :Select)selects items in the selection mode. [BAND]switches between the private mode and hands-free mode.[d]activates the voice dial.E]th hs between the mode and hands-de.
25Note: To have a mobile phone conversation with use of this unit, the mobile phone shall be compatible with the Hands-Free Profile.Use of receiving/calling records or telephone directory (phonebook)1 Press [BAND] at the standby state. 2 Push [SEL] (Select).The display changes as follows: The record of receiving calls (up to 5 records) that have not been taken is displayed. Rotation of [VOL] allows users to switch the record to be displayed. Pressing [PHONE] allows users to make a call to the displayed record.The record of receiving calls (up to 5 records) that have been taken is displayed. Rotation of [VOL] allows users to switch the record to be displayed. Pressing [PHONE] allows users to make a call to the displayed record.The calling record (up to 5 records) is displayed. Rotation of [VOL] allows users to switch the record to be displayed. Pressing [PHONE] allows users to make a call to the displayed record. The telephone directory is displayed. Rotation of [VOL] allows users to switch the data registered on the tele-phone directory to be displayed. (up to 6 entries)Pressing [PHONE] allows users to make a call to the displayed data. Pressing [BAND] allows the deletion mode to be activated to delete the displayed data on the telephone directory. If [BAND] is pressed again af-ter “SURE TO DEL?” appears, the currently displayed one piece of data on the telephone directory is deleted. Note: To use this function, the telephone directory must be imported from Bluetooth® mobile phone to this unit. (Refer to the below)This unit becomes standby for importing the telephone directory from a Bluetooth® mobile phone. (Each time for single directory data transmission)Operate the Bluetooth® mobile phone to transmit the telephone directory data to this unit. Notes: ¡ To use this function, the mobile phone must be compatible with the Object Push Profile.¡ “IMPORT ERROR” is displayed and the regular mode is restored if 1 minute elapses in the “IMPORT” flashing period without importing the telephone directory from mobile phone.Receiving record with no respondingReceiving record with conversation madeCalling recordTelephone directoryTelephone directory manually import mode
26Bluetooth® - Music PlayerPausePress [h / 5] (Pause/Play)Press again to cancel.Note: Some mobile phones automatically switch to energy saving mode or sleep mode when pause the music playback, and automatically disconnected the Bluetooth® connection (“B/T DISCOND” is displayed on this unit).But if you want to reconnect the Bluetooth® connec-tion, performing playback on the mobile phone itself. Music mode activationHold down [s] for more than 2 seconds. (Music mode)If [s] is held down for more than 2 sec-onds again, the phone mode is activated. (Phone mode)Note: “INVALID” is displayed and the Phone mode is restored if 1 minute elapse in the Music mode without detecting A2DP compatible device. Song selection[FILE d]: Next file Hold down for fast forward. Release to resume the regular play.[FILE s]: Back to the beginning of the current file. Back to the previous file. (press twice)Notes:¡ The control of pressing [FILE d] / [FILE s] in music mode depends on the key definitions of connected device.¡ Depending on the specifications of the connected audio device, operations may not work.Note: The Bluetooth® audio devices that can be played with this unit must be compatible with A2DP (Advanced Audio Distribution Profile) or AVRCP (Audio/Video Remote Control Profile).[BAND] (h/ 5) (Pause/Play) toggles between pause and play with the player source. [FILE 6] [FILE 7] skip to the previous/next file in the player mode.
27Notes on Bluetooth®Frequency band usedThis product uses the 2.4 GHz frequency band, but other wireless devices may also use the same frequency. Note the following to prevent radio waves interfering with other wireless devices. Microwave ovens and other industrial, scientific, and medical equipment, in-plant radio stations used for mobile object identification on, for example, the production lines of factories, specified low power radio stations that do not require a license, amateur radio stations, and the like (hereafter abbreviated as “other radio stations”) operate in the same frequency band as this product.Usage limitations¡ This product is not guaranteed to be able to per-form wireless communication with all Bluetooth® compatible devices.¡ Bluetooth® compatible devices for wireless com-munication comply with the standard defined by Bluetooth® SIG, Inc., and need to receive certifica-tion. However, even if a Bluetooth® compatible device complies with the standard, a connection may not be possible, or the operating procedure, display, or operation may differ because of the specifications or settings of the device.¡ This product includes support for security func-tions compliant with the Bluetooth® standard, but security may sometimes be insufficient depending on the operating environment and settings. Be careful during wireless communication.¡ We assume no responsibility whatsoever for data generated or information leaked during wireless communication.Influence from other devices¡ If this product is used near another Bluetooth® compatible device or a device that uses the 2.4 GHz frequency band, problems such as the device not working properly and noise generation are likely to occur because of radio wave interference.¡ This product may not work properly if there is a broadcasting station or the like nearby, and the surrounding signal is too strong.Application limitations¡ To use this product for listening to music or for a Hands-Free call, the Bluetooth® compatible device needs to support the following Bluetooth® version. Bluetooth® Standard Ver. 2.1¡ To use this product for calling with a mobile phone, the mobile phone needs to support the Hands-Free Profile.¡ To transfer the contacts of a mobile phone to this product, the mobile phone needs to support the Object Push Profile.¡ A connection may not be possible, or the operat-ing procedure, display, or operation may differ because of the specifications or settings of the Bluetooth® compatible device.¡ Even if this product and Bluetooth® compatible device are close to each other, sound may be inter-mittent or affected by noise because of the state of the signal.Bluetooth®The Bluetooth word mark and logo are owned by the Bluetooth SIG, Inc.
28Alarm SettingAlarm time setting*The 12-hour system is used for example.1 Hold down [ALM] (Alarm) for more than 2 seconds. (Alarm time display)“ALARM ADJUST” is displayed when the alarm time is not adjusted.2 Hold down [ALM] for more than 2 sec-onds after the above display is shown.Hour blinks3 Adjust the hour.[d] : Sets ahead.[s] : Sets back.Hour entered4 Push [ALM].Minute blinks5 Adjust the minute.[d] : Sets ahead.[s] : Sets back.Minute entered6 Push [ALM] to complete.CompletedThe alarm is set to ON automatically after com-plete alarm time setting.Alarm indicator ( ) lights.Notes: ¡ When the clock (a page 9) is not set, perform and complete the alarm time setting, the clock time will set to “13:00” automatically. Please readjust the clock time depending on the actual clock time.¡ Hold down [d] or [s] to change numbers rapidly.¡ When you want to readjust the alarm time, repeat steps 1 to 6.[s]/[d] sets the hour and minute[ALM] selects items in the alarm time setting. items in the ime setting.
29Turning ON/OFF the alarm1 Hold down [ALM] for more than 2 sec-onds. (Alarm time display)2 Push [ALM]. (Alarm ON/OFF setting)3 Turn [VOL] (Volume) clockwise or counterclockwise to select alarm ON or OFF, then push [ALM] again to confirm the setting.(Select alarm ON, lights.)Notes: ¡ Before turn ON the alarm, make sure the alarm time is set. Failure to heed this will cause invalid selection of alarm ON.¡ Hold down [ALM] for more than 2 seconds when the alarm is sounding also turns off the alarm.¡ Access of alarm ON/OFF is available by push [ALM] in the “Alarm time display”.Activating snoozePress any button on this unit when the alarm is sounding.The alarm will sound again in 9 minutes.Notes:¡ If you do not turn the alarm off when the alarm is sounding, the alarm sound will shut off after an hour. (Including the amount of time the alarm was postponed (snooze))¡ If you connect with the optional wired remote control unit (RSA-300), please notice the ALARM button on RSA-300 only reflect the function of Display Alarm Time. (It’s not feasible for long key operation)
30TroubleshootingCommonProblem Possible cause a Possible solutionNo power to the unit The power cord (battery, power and ground) is connected in the wrong way.a Check the wiring.Sound is not generated.Volume is set to zero (0).a Adjust volume.There is contact between the external mute lead and the chassis.a Connect the external mute lead correctly. If the lead is unused, insulate it.The wiring of speaker lines are not correct, or a break or poor contact arises.a Check the wiring in accordance with the wiring diagram.NoiseThere is an electromagnetic-wave generator such as a mobile phone near the unit or its electrical lines.a Keep an electromagnetic-wave generator such as a mobile phone away from the unit and the wiring of the unit. In case that noise cannot be eliminated due to the wiring harness of the vehicle, consult your dealership.The contact of the ground lead is poor.a Make sure that the ground lead is connected to an unpainted part of the chassis securely.Noise is made in step with engine revolutions.Alternator noise comes from the vehicle.a Change the wiring position of the ground lead.a Mount a noise filter on the power supply.Some operations are not executable.Some operations are not executable in particular modes such as menu mode.a Read the operating instructions carefully and cancel the mode. If the unit is still out of order, consult your dealership.No sound from speaker(s)BALANCE/FADER setting is not appropriate.a Readjust BALANCE/FADER.There is a break, a short circuit, poor contact or wrong wiring regarding the speaker wiring.a Check the speaker wiring.If you suspect something wrongCheck and take steps as described below.If the described suggestions do not solve the prob-lem, it is recommended to take the unit to your dealership. The product should be serviced only by qualified personnel. Please refer the checking and the repair to professionals. We shall not be liable for any accidents arising out of neglect of checking the unit or your own repair after your checking.Never take measures especially for those other than indicated by italic letters in “Possible Solution” described below because those are too dangerous for users to handle themselves. Warning¡ Do not use the unit in an irregular condition, for example, without sound, or with smoke or a foul smell, which can cause ignition or electric shock. Immediately stop using the unit and consult your dealership.¡ Never try to repair the unit by yourself because it is dangerous to do so.
31The speaker channels are reversed between right and left.The speaker wiring is confused between right and left.a Perform the speaker wiring in accordance with the wiring diagram.The sound field is not clear in the stereo mode. Central sound does not settled.The plus and minus terminals at right and left channels of speak-ers are connected reversely.a Perform the speaker wiring in accordance with the wiring diagram.The power fails unintentionally. The safety device works.a Consult your dealership.Clock time is reset.Battery cable is not correctly connected.a Connect the battery cable to the terminal that is always ac-tive.RadioPoor reception or noiseAntenna installation or wiring of antenna cable is faulty.a Check whether the antenna mounting position and its wiring are correct. In addition, check to see whether the antenna ground is securely connected to the chassis.No power is supplied to the antenna amplifier (when using a film antenna, etc.).a Check the wiring of the antenna battery lead.The number of auto preset stations is less than 6.The number of receivable stations is less than 6.a Move to an area where receivable stations number is maxi-mum, and try presetting.USB (MP3/WMA)Music is not played back even if a USB device is connected. The USB device and USB extension cable are not connected cor-rectly.a Connect the USB device and USB extension cable correctly.There is no music stored in a format that is supported on this unit.a Check if there is any music data that can be played stored on the USB device.The file system of the USB device is not compatible with this unit.a Use a USB device with a FAT12/16/32 file system.Use a USB device with a FAT12/16/32 file system.a Use a USB device with a current consumption lower than 1 A.“READING” is displayed but music is not played back. A USB hub is connected.a Do not use a USB hub.Too many recorded folders/files exist.a When there are too many recorded folders/files, it may take a long time to read all of the files.
32Troubleshooting (continued)Bluetooth®Unable to register, connect, or call.Devices incompatible with HFP (Hands-Free Profile) cannot be used. a Use devices compatible with HFP (Hands-Free Profile). The mobile phone is not registered on this product.a Connecting and calling with an unregistered mobile phone is not possible. Register the mobile phone on this product.The mobile phone is not connected.a Calling is not possible if the mobile phone is not connected to this product. Connect the mobile phone to this product.The Bluetooth® device can not pair/register with this unit success-fully.a Check the device Bluetooth® setting is set to ON.a Delete the paired memory within Bluetooth® device and main unit, then pair again.a Switch OFF and ON with device Bluetooth® function, then pair again.a Check the device PIN code, then input the correct PIN code for connection.This unit and Bluetooth® device are too far apart.a Bring this unit and Bluetooth® device closer together and try to pair again.The other party in the call complains of echoing or noise.The voice of the other party heard from the car speakers is being picked up by the microphone and returned to the other party.a Close the windows.a Move the microphone away from the car speakers.a Lower the volume.Phone voice is of poor quality.Phone voice is inaudible.Mobile phone reception is poor.a Check mobile phone reception.Bluetooth® audio does not work.The Bluetooth® audio-compliant device does not support A2DP/AVRCP.a Check the instruction manual of the Bluetooth® audio-compli-ant device for support conditions.Some mobile phones can not play music via Bluetooth® if mobile phone is not in the music player mode.a Operate mobile phone, select the music player mode, then press PLAY to play the desired music file via Bluetooth® com-munication.
33Product servicingIf the suggestions in the charts do not solve the problem, we recommend that you take it to your dealership. The product should be serviced only by a qualified technician.Bluetooth®Bluetooth® audio cannot be heard.The main unit is not in the Bluetooth® music mode.a Check and switch to the Bluetooth® music mode.The Bluetooth® audio is not output from mobile phone or Blue-tooth® audio device.a Switch OFF and ON with mobile phone or Bluetooth® audio device for reestablish the communication.The music is paused temporarily.a Press [BAND] button on this unit to resume music play.Some mobile phones can not restore the A2DP communication with music mode after ended phone conversation.a Press [BAND] button twice on this unit to restore the A2DP communication.Telephone voice dial does not work.The mobile phone does not support the voice dial function.a Change to another mobile phone which supports the voice dial function. The distance between user and microphone is too far apart, the sound is low, or the surrounding is noisy.a Speak toward the microphone closer and keep the surround-ing quiet.Sound skipping with Bluetooth® audioThis unit and Bluetooth® device are too far apart.a Bring the Bluetooth® device closer to this unit.There is another wireless device near this unit and interference occurs.a Switch off the other wireless device and keep it away from this unit.Other wireless device is using the Bluetooth® profile excluding from main unit. (Ex. All phonebook transmission)a Switch off the transmission with wireless device.Unable to import the telephone directory.The mobile phone dose not support Bluetooth® OPP (Object Push Profile) function. a Change to another mobile phone which supports Bluetooth® OPP function. There is no telephone or name information within exported direc-tory. a Confirm the directory information is completely and correctly. The mobile phone is too far apart or communication interference occurs. a Bring the mobile phone closer to this unit or switch off the other wireless device and keep it away from this unit.
34USB (MP3/WMA)A USB device is not connected or the connected device cannot be recognized. a Use a USB memory that is suitable for this unit. No playable files exist. An unsupported USB device is connected. a Use a USB memory that is suitable for this unit. a Record files that can be played back on this unit onto the USB memory. A USB device that exceeds the current capac-ity that can be supplied is connected. For some reason, an over-current was detected. a Use a USB memory that has a consumption current of less than 1 A. a Switch the Source, and select the USB (MP3/WMA) mode again. a Switch the power off/on, and select the USB (MP3/WMA) mode again.a Check that the USB connector section is not dirty, and that there is no foreign objects. No operation by some causea Turn off the power and turn on the power again, or turn the key to the ACC OFF posi-tion and turn the key to ACC ON position again. If this does not solve the problem, unplug the power cord and plug it in again. In case the unit is still out of order, consult your dealership.The player cannot read the file you are trying to play for some reason. (File recorded in an unsup-ported file system, compression scheme, data format, file name extension, damaged data, etc.) a Confirm that the USB extension cable is firmly connected, and reconnect if not. Select a file that the player can read. Check the type of data stored in the USB memory. Format the USB memory if necessary. The WMA file can be copyrighted. a The file protected by copyright is not play-able. Error Display Messages
35For use with iPodThe iPod is not recognized correctly. a Some time could be taken for the iPod to be recognized. a Check the connection. a Reset the iPod, and then connect it again. Your iPod has no playable music. a Download playable music to your iPod. The song has no title. a Name the title to the song. The connected iPod is not supported by this unit. a Connect a supported iPod to this unit. Bluetooth®The Bluetooth® module for some reason cannot function.a Switch the power or ACC ON/OFF. In case the unit is still out of order, consult your dealership.Bluetooth® communication error (Module and System)a Switch the power or ACC ON/OFF. In case the unit is still out of order, consult your dealership.
36Notes on MP3/WMAMP3 (MPEG Audio Layer-3) is a format for compressed audio file. These formats allow users to save all the files contained in approximately 10 pieces of existing CDs on one piece of CD-R/RW.Note: Each of encoding software is not included with this unit.*MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.Cautions as to compressed audio files¡ High bit rate and high sampling frequency are recommended for high quality sounds.¡ Selecting VBR (Variable Bit Rate) is not recom-mended because playing time is not displayed properly and sound may be skipped.¡ The playback sound quality differs depending on the encoding circumstances. For details, refer to the user manual of your own encoding software and writing software.¡ Be sure to put an extension compatible with the format.¡ It is recommended to set the bit rate to “128 kbps or more” and “fixed”. CautionNever put an extension indicating compressed audio (such as “.mp3”) to files other than compressed audio files. This may not only produce noise from the speaker damage, but also damage your hearing.Display Information¡ MP3Folder name, File name¡ MP3 (ID3 tag)Album name, Title name/artist name¡ WMA (WMA tag)Album name, Title name/artist nameDisplayable characters¡ Displayable length of file name/folder name: within 30 characters. (Unicoded file and folder names are reduced by half in the number of displayable characters.)¡ Name files and folders in accordance with the standard of each file system. Refer to the instruc-tions of writing software for details.¡ ASCII character set and special characters in each language can be displayed.ASCII character setA to Z, a to z, digits 0 to 9, and the following symbols: (space) ! ” # $ % & ’ ( ) * + , - . / : ; < = > ? @ [ \ ] ˆ _ ` { | } ~Notes:¡ Characters may be garbled depending on encod-ing software to be used¡ Undisplayable characters and symbols will be converted into an asterisk (*).Cautions as to the display of this unitCompression formatsCompression method Bit rate VBR Sampling fre-quencyMPEG 1 audio layer 3 (MP3) 32 k – 320 kbps Yes 32, 44.1, 48 kHzMPEG 2 audio layer 3 (MP3) 8 k – 160 kbps Yes 16, 22.05, 24 kHzMPEG 2.5 audio layer 3 (MP3) 8 k – 160 kbps Yes 8, 11.025, 12 kHzWindows Media Audio Ver. 2, 7, 8, 9* 64 k – 160 kbps Yes 32, 44.1, 48 kHz* WMA 9 Professional/LossLess/Voice are not supported.
37CopyrightIt is prohibited by copyright laws to copy, distribute and deliver copyrighted materials such as music without the approval of copyright holder except enjoying yourself personally.No warrantyAbove description complies with our investigations as of December 2013. It has no warranty for repro-ducibility and displayability of MP3/WMA.Compressed audio file writing¡ If compressed audio files formatted with two or more types are saved on the same USB-device, each format shall have a different folder.¡ Do not write files other than compressed audio files.¡ Playability may depend on the writing software.¡ This unit does not support the play list function.¡ You can shorten the duration between data read and playback by decreasing the quantity of files or folders, or the depth of the hierarchy.Supported file systemsFile system is FAT12/16/32.Maximum number of files/folders¡ Maximum depth of trees: 8 ¡ Maximum number of files: 65 535 ¡ Maximum number of files in one folder: 512 ¡ Maximum number of folders: 128 (Root folder is included.) Notes: ¡ You can shorten the duration between data read and playback by decreasing the quantity of files or folders, or the depth of the hierarchy. ¡ This unit counts the number of folders irrespective of the presence or absence of an MP3/WMA file. ¡ If the selected folder does not contain any MP3/WMA files, the nearest MP3/WMA files in the order of playback will be played. ¡ “ROOT” appears when displaying the root folder name. ¡ Empty folders stored on the USB memory are not included in the folder count. ¡ Depending on the connected USB memory, the order in which the files are played back may differ to the order in which the files were stored. Folder selection order/file play-back orderRoot Folder(Root Directory)Folder SelectionFile SelectionTree 1 Tree 2 Tree 3 Tree 4 Tree 8(Max.)2134qqwertyy5681 87–In the order–In the orderRecording MP3/WMA Files on a USB-Device
38MaintenanceCleaning this unitYour product is designed and manufactured to ensure a minimum of maintenance. Use a dry soft cloth for routine exterior cleaning. Never use benzine, thinner or other solvents.AlcoholPesticideWaxBenzineThinnerAlcoholPesticideWaxBenzineThinnerTo remove stubborn stainsq Moisten the soft cloth in dish-washing soap diluted with water and wring well.w Wipe lightly. Go over the same surface with a dry cloth.Notes:¡ Since there is the possibility of water drops getting inside of the unit, do not directly apply cleanser to the surface.¡ Do not scratch the screen with your nails or other hard objects. The resulting scratches or marks will obscure the images. CautionIf water drops or similar wet substances get inside the unit, it may cause a malfunction.
39GeneralPower Supply: 12 V DC (11 V – 16 V), test Voltage 14.4 V, Negative @ groundCurrent consumption: Less than 2.5 A Maximum Power Output: 45 W × 4 channels at 400 Hz, Volume Control maximumTone adjustment range: Bass: ± 12 dB at 100 Hz Treble: ± 12 dB at 10 kHzPower Output: 18 W per channel into 4 Ω, 40 Hz to 30 000 Hz at 3 % THDSuitable Speaker Impedance: 4 ΩDimensions (W x H x D): 178(W) x 50(H) x 115(D) mm {7” x 1-15/16” x 4-1/2”}Weight: 0.6 kg {1 lb. 5 oz.}USB connector USB standard compatibility: 1.1/2.0 full speed File system: FAT12/16/32 Maximum supply current: 1 A Playable audio format: MP3/WMA Recommended capacity/partition: Less than 32 GB/Only supported for 1 partition.Front AUX input Input impedance: 10 kΩ Maximum input level: 2.0 V Connector: 3.5 mm ø Stereo mini pin Input sensitivity: 200 mVrmsRear AUX input Input impedance: 10 kΩ Maximum input level: 2.0 V Input sensitivity: 200 mVrmsFM Stereo RadioFrequency Range: 87.9 MHz – 107.9 MHzUsable Sensitivity: 12 dBf (1.1 μV/ 75 Ω, S/N 30 dB)50 dB Quieting Sensitivity: 17 dBf (1.8 μV/ 75 Ω)Frequency Response: 30 Hz – 15 000 Hz ± 3 dBAlternate ChannelSelectivity: 75 dBStereo Separation: 35 dB at 1 kHzSignal/Noise Ratio: 70 dB (Mono)AM RadioFrequency range: 530 kHz – 1 710 kHzUsable sensitivity: 28 dB/μV (25 μV, S/N 20 dB)Weather Band RadioFrequency range: 162.400 MHz – 162.550 MHzUsable sensitivity: 3 dB/μV (S/N 20 dB)Signal/Noise Ratio(40 dB/μV): 50 dBBluetooth®Communication Frequency: 2 402 MHz – 2 480 MHzNumber of Channels: 79 ChannelsCommunication Mode: Frequency Hopped Spread Spectrum Com-municationRF Output: 0 dBm (0.8 mW)Service Area: Within 10 mApplicable Bluetooth® Version: Version 2.1 + EDRBluetooth QD ID B016993.Notes:¡ Specifications and design are subject to modifica-tion without notice due to improvements.¡ Some figures and illustrations in this manual may be different from your product.Above specifications comply with EIA standards.Power Output: 16 W RMS x 4 Channels at 4 Ω and ≤ 1% THD+NSignal to Noise Ratio: 85 dBA (reference: 1 W into 4 Ω) Specifications
40Specification from the Terminal End (Rear Connector of This Unit)Specification from the terminal end (Rear connector of this unit) Cavity Pin # Function I/O A1 1 J1939 CAN-H* I/O A2 2 J1939 CAN-L* I/O A3 3 Park Lights I A4 4 ACC (Ignition) I A5 5 Amp Control O A6 6 Dimmer PWM I A7 7 Battery I A8 8 Power Ground I B1 9 RR+ (Speaker) O B2 10 RR- (Speaker) O B3 11 RF+ (Speaker) O B4 12 RF- (Speaker) O B5 13 LF+ (Speaker) O B6 14 LF- (Speaker) O B7 15 LR+ (Speaker) O B8 16 LR- (Speaker) O C1 17 Power Ground I C2 18 Amp Sense I C3 19 N/C NA C4 20 N/C NA C5 21 N/C NA C6 22 N/C NA C7 23 L_AUX_IN I C8 24 AUX_SHIELD_GND I C9 25 AUX _COM I C10 26 R_AUX_IN I C11 27 AUX _ON_OFF I C12 28 Power Ground I C13 29 N/C NA C14 30 Power Ground I C15 31 MIC + I C16 32 MIC – I C17 33 N/C NA C18 34 N/C NA C19 35 N/C NA C20 36 N/C NA CautionThis product is designed without a fuse inside due to fuses already exist in your vehicle. If your vehicle is without the fuse or a circuit breaker to protect this unit, please consult your dealership add the specified fuse* or a circuit breaker at the BATTERY lead of your vehicle’s harness.*We would recommend to use fuses of the specified rating not exceed (15 A). Using fuses that exceed the prescribed capacity could cause this product to start smoking, ignite or other malfunction.191613107412017141185212345678123456783 6 9 12 15 1835322926232017363330272421189101112131415161234567819 22 25 28 31 34Cavity CCavity BCavity APin #Note: * This pin (J1939 CAN-H/J1939 CAN-L) is not available because it is for future use. Please do not connect to this pin.
41Memorandum
42Memorandum
43
YFM264C313ZA PTW0513-0 Printed in Taiwan

Navigation menu