| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 68249 |
| Application ID | TwD9h2EqbjEZXouPCDdyjw== |
| Document Description | 8 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 44.53kB (556580 bits) |
| Date Submitted | 1999-11-05 00:00:00 |
| Date Available | 1998-07-21 00:00:00 |
| Creation Date | 2001-05-15 08:34:45 |
| Producing Software | Acrobat Distiller 4.0 for Windows |
| Document Lastmod | 2001-05-15 08:34:47 |
| Document Title | 8 |
FCC ID. : ACJ93312136
J | ‘0 iivrmNqu mu 11 mi PM «u 1' 1 $ yFACTORiY—‘Ehai‘lTROL “Fab-99mm I L
Operating Instructions
Mode d’emploi
Bedienungsanleitung
lnstrzioni d’uso
Manual de Instrucciones
Multi-Scan Color Monitor
MODEL TX—D7836NM
Please read these instructions thoroughly before operating the display monitor.
, O~HV1IZ—Nqu] 98.3.245‘13 PM «753 $
IMPORTANT NOTICE CONCERNING POWER CORD SELECTION
The power cord lor this unit has been packed separately and has been selected according to the
country at destination and must be used to prevent electric shock. Use the lcllowing guidelines 1th is
necessary to replace the original curd set.
The lemale receptacle of the cord set must meet GEE-22 requirements and will look like Figure 1:
For the United States and Canada
In the United States and Canada the male plug is a NEMA 5-15 style (Figure 2) and is UL listed and
CSA labelled. For units which are mounted on a desk or table, type SVT or SJT cord sets may be
used. For units which sit on the lloor, only SJT type cord sets may be used, The cord set must be
selected according to the current rating tor your unit. Please consult Table A lor the selection criteria
tor power cords used in the United States and Canada. (The cord set is marked with its Card Type)
For European countries:
In Europe you must use a cord set which Is appropriate for the receptacles in your country.
The cord set Is HAH-Ceflified, and the mark 4 HARP will appear on the outer sheath, or on
the Insulation oi one of the inner conductors.
Il you have any questions concerning the proper power cord to use, please consult with the dealer
lrom whom you have purchased your unit,
,, Table A
Cord Type Size ot Conductors In Cord Maximum Current Rating ol Unit
SJT 18AWG 10Amps
16AWG rzAmps
14AWG 12Amps
SVT 18AWG toAmps
t7AWG i2Arnps
FIgumT Figure 2
I= Precautions:
AC PLUG CORD ( FOR UK.)
FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY.
IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET THEN
THE PLUG SHOULD BE CUT OFF AND DISPOSED OF SAFELY.
THEFIE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT OFF PLUG IS
INSEHTED INTO AN APPROPRIATE SOCKET
It a new plug is to be titted, please observe the wiring code as shown below.
it in any doubt, please consult a qualified electrician,
WARNING: THIS APPLIANCE MUST BE EARTHED,
IMPORTANT: The wires in this mains lead are coloured in accordance with the lollowing
| code:
Green-and-Yellowz.
ive
I it the coloured wires ol the mains lead of this appliance do not correspond with the coloured
markings identilying the terminals in your plug, proceed as lollows:
The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the
plug which is marked by the letter E or by the Earth symbol J; or coloured GREEN or
GREEN—AND—YELLOW.
The wire which is coloured BLUE must be connected to the terminal in the plug which is
marked with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal in the plug which is
marked with the letter L or coloured RED
I-1
Eds
ENGLISH
) (O'HVKIZ-NHQKJ 98313 2 in PM A», u‘ 5 $
Customer's Record
The serial number at this product may be tound on its back cover,
You should note this serial number oi this unit in the space provided and retain this booklet as a
permanent record of your purchase to aid in identification in the event ot thett or loss.
Model number : TX»D7SSGNM
Serial number .
Product names listed here are company trademarks
Ta b [9 of CO H ten ts or registered trademarks,
Precaution I—4
Features 1—5
Names I-G
AC power cord I-G
Connections I-7
Operation I-9
Operation procedure 1—9
Adjustments I-10
Power Management System H 3
Dispiay Modes Memory I-13
Preset Mode I—13
It Trouble Occurs I-14
Specifications - H 5
Connectors H 5
Monitor stand 1—1 6
index 1—1 6
I - 3
r'n
U—ttVIlZ-‘ihiqxl 93.325u51 AM A‘» z 7 $
Features
1) Digital adjustment using the on-screen display
- The on-soreen menu is available in 5 languages.
One of German, French, English. Italian or Spanish can be selected.
- Adjustments can be periormed easily with the 4 control buttons and on-screen
menu.
- Set the on-screen menus at any preferred location on the display screen (six
locations).
2) Environmentally-friendly
~ The display power consumption can be suppressed by using this unit in
combination with a computer that conforms to the VESA DPMS (Video Electronics
Standards Association Display Power Management Signaling) standards.
~ This product conforms to the ENERGY STAR’ program.
- It conforms to Sweden‘s MPR ll guidelines (Iowftrequency electro-magnetic field)
and.TCO‘92 guidelines.
3) VESA DDC 1/28 is used.
. By using this unit in combination with a computer that conforms to the VESA (Video
Electronic Standards Association) DDC (Display Data Channel) standard, the
display monitor can be used in the optimum condition.
4) Monitor stand removal.
~ The monitor stand can be removed and the monitor can be installed upon a desktop
computer.
5) High quality CRT is used
- The screen is 17-inch (16.0 inches viewable with 027 mm dot pitch), Advanced
AGRAS (Anti-Glare, anti-Reflection and Anti-Static) Coat. dark face and Crystal
Pigment, providing low reflection, static electricity prevention, high resolution and
high contrast.
6) Digital multiscan
' Automatic following is done with horizontal frequency of 30 kHz to 70 kHz and
vertical frequency of 50 Hz to 180 Hz; capable of matching VGA, SVGA, VESA and
Macintosh 13", is”. 19", 21" modes and 1280 (H) x 1024 (V) / (fv=60 HZ) high
resolution
new” ,_
mm 93.325 ll 54 A.“ [<4 ye
Connections
1. Signal Cable Connection
we
Always turn all the power supply of the computer and the
monitor before performing the connection procedures.
Connection method will dilter in accordance with the computer in use. Connect one
end of the supplied Signal cable to the mini D-Sub 15 pin connector on the rear of the
unit. and then connect the other end to the computer‘s video connector. Refer to the
following it connection is to be made to any other computer, reler to the instruction
manual of the machine in question.
Connect to the computer's video connector.
I To a Macintosh
Tighten the screws securing
the plug tightly to prevent
it from becoming discon-
nectedt
Tighten the screws securing
the plug tightly to prevent
it from becoming discon-
nested.
Tighten the screws on the
plug or adapter securely
A commermally available conversion adapter is required lor connection to
Apple computers,
Connect the conversion adapter lor Apple computers to the plug on the cable
on the rear side of the display unit.
Connect the other side ol the cable to the video connector of the computer,
l-7
—$~
! 0~HVllZ—N.\r|,q\3 98123101 PM “A 7 ll
—€l>—
O pe ratio n
Basic operation
El <1
E El
Displays main menu.
Exits menus.
Selects menu item.
To scroll through menu item.
To adjust level 01 selected item.
Menu screen
The functions that can be adjusted lot this unit are displayed as icons.
1) Press the L key to return to the menu screen.
2) This is modified by pressing the E and El keys at the front.
3) Pressthe 1 key to enter the adjustment screen.
Operation procedure
Horizontal pOSlllDfl adjustment
1. Press the 1 key todisplay the menu.
D m
m 4
fbtzifi
2. Press the E key to select the Size 3. Pas. from the menu screen.
Press the if key to display the menu.
E1 <1 D E]
' “575395—
50 _:l
3. Press the tron! E or El keys to reach the desired condition. a Q m 3 53]. an
El q l> El
E E H. P a s t H o n
10 —:
a m: H m an 421
4, Press the Lkey to memory the settings and complete the adjustments.
Press the 4 key once more to clear the menu screen.
El <1 D m
ime
m 56.- Q u Contrast Brightness
D [3 Q) £8 Color Temp
W ‘éé 7 t 555
Fl A H. Moire Language oso Posltlcn
Contrast Degauss
H. Pnsttlon
. ohviiz-NquJ 98.3.2511,55AM N— “1 l} $ ’
Adjustment menu
U Geometry 2 Press theiZ key to select the vertical pincushion/vertical pincushion
corner I side pincushicn balance I trapezoid I parallelogram adjustments.
1] V. Pincushion Z The image can be corrected tor barrel distortion.
H V. Pin. Corner 3 The image can be corrected tor vertical pmcushlon distortion in
the tour corners.
(1 Side Pin. Bal. I It is possible to adjust the side plncushion balance to the tell
and right.
D Trapezoid Z The image can be corrected (or trapezoidal distortiont
fl Parallelogram I The image can be corrected tor parallelogram distortion.
D Rotation 2 This control adjusts the evenness ol the screen image relative to a horizontal line.
Note: It the E and 5 keys are pressed at the same time, the standard level (50) will he set.
COiOl’ Temp 2 It is possible to switch the whiteness oi the image
1) Press the E and E keys to select 1 (9300K + BMPCDl/Z (7500K) / 3 (5500K)/
4 (QSODK + 27MPCDl I 5 (User color).
2) B will be displayed at the bottom right-hand side ot the on~soreen panel when 5 (User
color) has been selected. Press the 2 key on the lront operation area to enter the User
color adjustment screen.
User CO|0T Z lt is possible to adjust the whiteness of the image to suit personal preference.
1) Select Ft (red). G (green), 5 (blue) with the 2 key.
2) Adjust the color to match personal preterence with (Z and E keys. _
' As user colors cannot be recalled, take notes oi the set values beforehand.
0 Recall 2 It is possible to return to the initial settings (the settings at the time ottaclory
shipment).
1) When the 1 key (Yesl is pressed, the settings are recalled and the menu screen returns.
(Recall = return to initial settings (settings at time ot factory shipment”
2) When the 7 key (N0) is pressed. the menu screen returns without the settings being
recalled. (The settings return to what they were immediately betore the recall.)
it there are no operations pertormed tor about 30 seconds, the screen goes ott without a recall.
fie Video Level 2 The video input signal level can be matched to the computer being used.
Either 0.7V or iv can be selected with the 2 (0,7V/1V) key.
Use 0.7V under normal condition.
l-11
i’ .
0—liVIlZ-N.\|.qd eiixzwosl PM N7 ”2 15 a;
Power Management System
This monitor contorms lo the VESA DPMS standard
This lunction can suppress power consumption by the display unit.
The computer and video hoard being used must also contorm lo the VESA DPMS standard.
Note; Regarding operation, please consult the Operation Manuals tor the hardware being used.
Modes change in response to input signals as indicated in the table below.
"i" In utsi nal
APM state Screen status LED color coinage” Return time Vim Judicial Venice] I
ON STATE Active Green Normal - T on on oN
STAND-BY Black out yellow
[1] CRT
[2] INPUT SIGNAL:
[3] CONNECTOR ;
[4] POWER:
[5] CONTROL :
6] VIDEO :
[9] DISPLAY AREA:
II) DIMENSION:
12] WEIGHT:
14] OTHERS :
(1)
(Z)
(3)
(4)
(5)
(6)
(7)
(B)
(9)
TYPE
PHOSPHOR
GLASS. SURFACE
60mm SHORTER DEPTH WITH LARGE SCREEN IN THE NEW CABINET
MAXIMUM SCANNING AT N SSH: FOR 1280 x 1024 RESOLUTION
HIGH CONTRAST. HIGH BRIGHTNESS WITH CRYSTAL PIGMENT PHOSPHOR
COLOR SETTING AT USER SIDE AND 4 FACTORY SETTINGS
POWER SAVE MANAGEMENT BASED ON VESA STANDARD WITH 13W ( MAX I
AT OFF STATE
ONESCREEN DISPLAY CONTROL ( 5 LANGUAGES)
SELF TEST FUNCTION ( NON-CONNECTION WITH COMPUTER)
DDCI/ZB BASED ON VESA STANDARD
WIDE RANGE OF N ( 50~180 Hz I
VIDEO RGB Anang( 759.0,7/10Vp-p)
SYNC
PRESET MODES
fl—IZSO ~70I
Source Exif Data:
File Type : PDF
File Type Extension : pdf
MIME Type : application/pdf
PDF Version : 1.2
Linearized : Yes
Create Date : 2001:05:15 08:34:45
Producer : Acrobat Distiller 4.0 for Windows
Modify Date : 2001:05:15 08:34:47-04:00
Page Count : 19
EXIF Metadata provided by EXIF.tools