Panasonic of North America 96NKX-FPG391 Facsimile with 5.8 GHz FHSS Cordless Telepone Base User Manual KX FPG391 E 001 007

Panasonic Corporation of North America Facsimile with 5.8 GHz FHSS Cordless Telepone Base KX FPG391 E 001 007

User Manual

5.8 GHz ExpandableCordless Phone System and FaxOperating InstructionsModel No. KX-FPG391Please read these OperatingInstructions before using the unitand save for future reference.KX-FPG391(E) (001-007) 04.4.15 5:06 PM Page 1
2For your future referenceDate of purchase Serial number(found on the rear of the unit)Dealer’s name and addressDealer’s telephone numberCaution:●The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use acomputer or other electronic device, including fax machines, to send any message unless suchmessage clearly contains in a margin at the top or bottom of each transmitted page or on thefirst page of the transmission, the date and time it is sent and an identification of the business orother entity, or other individual sending the message and the telephone number of the sendingmachine or such business, other entity, or individual. (The telephone number provided may notbe a 900 number or any other number for which charges exceed local or long-distancetransmission charges.)In order to program this information into your fax machine, you should complete the instructionson page 5 to page 7.●Note that the images of copied or received documents will remain on the used film. Whendisposing of the used film, use discretion.●Do not rub or use an eraser on the printed side of recording paper, as the print may smear.KX-FPG391(E) (001-007) 04.4.15 5:06 PM Page 2
3Important safety instructions!When using this unit, basic safety precautionsshould always be followed to reduce the risk offire, electric shock, or personal injury.1. Read and understand all instructions.2. Follow all warnings and instructions markedon this unit.3. Unplug this unit from AC outlets beforecleaning. Do not use liquid or aerosolcleaners. Use a damp cloth for cleaning.4. Do not use this unit near water, for examplenear a bath tub, wash bowl, kitchen sink, orthe like.5. Place the unit securely on a stable surface.Serious damage and/or injury may result ifthe unit falls.6. Do not cover slots and openings on the unit.They are provided for ventilation andprotection against overheating. Never placethe unit near radiators, or in a place whereproper ventilation is not provided.7. Use only the power source marked on theunit. If you are not sure of the type of powersupplied to your home, consult your dealeror local power company.8. For safety purposes this product is equippedwith a three prong grounded plug. If you donot have this type of outlet, please have oneinstalled. Do not use any type of adaptorplug to defeat this safety feature.9. Do not place objects on the power cord.Install the unit where no one can step or tripon the cord.10. Do not overload wall outlets and extensioncords. This can result in the risk of fire orelectric shock.11. Never push any objects through slots in thisunit. This may result in the risk of fire orelectric shock. Never spill any liquid on theunit.12. To reduce the risk of electric shock, do notdisassemble this unit. Take the unit to anauthorized servicenter when service isrequired. Opening or removing covers mayexpose you to dangerous voltages or otherrisks. Incorrect reassembly can causeelectric shock when the unit is subsequentlyused.13. Unplug this unit from the wall outlet and referservicing to an authorized servicenter whenthe following conditions occur:A. When the power supply cord or plug isdamaged or frayed.B. If liquid has been spilled into the unit.C. If the unit has been exposed to rain orwater.D. If the unit does not work normally byfollowing the operating instructions.Adjust only controls covered by theoperating instructions. Improperadjustment may require extensive workby an authorized servicenter.E. If the unit has been dropped or physicallydamaged.F. If the unit exhibits a distinct change inperformance.14. During thunderstorms, avoid usingtelephones except cordless types. Theremay be a remote risk of an electric shockfrom lightning.15. Do not use this unit to report a gas leak,when in the vicinity of the leak.SAVE THESEINSTRUCTIONSINSTALLATION:1. Never install telephone wiring during alightning storm.2. Never install telephone jacks in wet locationsunless the jack is specifically designed forwet locations. 3. Never touch uninsulated telephone wires orterminals unless the telephone line has beendisconnected at the network interface.4. Use caution when installing or modifyingtelephone lines.WARNING:To prevent the risk of fire or electrical shock, donot expose this product to rain or any type ofmoisture.OTHER INFORMATION●Keep the unit away from electrical noise-generating devices, such as fluorescent lampsand motors.●The unit should be kept free from dust, hightemperature and vibration.●The unit should not be exposed to directsunlight.●Do not place heavy objects on top of this unit.●Do not touch the plug with wet hands.KX-FPG391(E) (001-007) 04.4.15 5:06 PM Page 3
4Recording paper!1Fan the stack of paper to prevent a paperjam.2Insert the paper into the paper tray.Connections!To a single telephone linejack (RJ11C)To a power outlet(120 V, 60 Hz)Telephone line cordPower cordPower surgeprotector( )Line surgeprotector( )1Connect the telephone line cord.2Connect the power cord.Note:●The warranty does not cover damage due to power line surges or lightning. For additional equipmentprotection, we recommend you use a surge protector.Caution:●When you operate this product, the power outlet should be near the product and easily accessible.KX-FPG391(E) (001-007) 04.4.15 5:06 PM Page 4
5Date and time, your logo and facsimiletelephone number!You should program the date and time, your logo and facsimile telephone number. Thisinformation will be printed on each page transmitted from your unit.Fax CorrespondenceYour logo Your facsimile telephone number Date and timeFROM : Panasonic FaxExample: FAX NO. : 1234567 Feb. 26 2004 09:02AM P1Setting the date and time1Press .2Press , then .3Press .4Enter the correct month/day/year by selecting2 digits for each, using the dial keypad.Example: Aug. 10, 2004Press .5Enter the correct hour/minute by selecting 2 digits for each, using the dial keypad.Press to select “AM” or “PM”.Example: 3:15PM1. Press .2. Press until “PM” is displayed.6Press .7Press .MENUSET1503001 480SET0 1MENUKX-FPG391(E) (001-007) 04.4.15 5:06 PM Page 5
1234567890STOP61Press .2Press , then .3Press .4Enter your logo, up to 30 characters, usingthe dial keypad. See right for details.Example: “Bill”1. Press twice.2. Press six times.3. Press six times.4. Press to move the cursor to the nextspace and press six times.5Press .6Press .MENUSET5542SET0 2MENUSetting your logoThe logo can be your company, division or name.Keys Characters#& ’ ( ) @,–./1abcABC2de f DEF3ghiGHI4jklJKL5mn oMNO6pqr sPQRS7tuvTUV8wxyzWXYZ90 (Space)To delete a digitTo select characters with the dialkeypadPressing the dial keys will select a character asshown below.Note:●To enter another character located on thesame number key, press to move thecursor to the next space.KX-FPG391(E) (001-007) 04.4.16 1:13 PM Page 6
7Setting your facsimile telephone number1Press .2Press , then .3Press .4Enter your facsimile telephone number, up to 20 digits, using the dial keypad.5Press .6Press .MENUSETSET0 3MENUKX-FPG391(E) (001-007) 04.4.15 5:06 PM Page 7
8Ringer volume4 levels (high/middle/low/off) are available.While the unit is idle, press or .●If any documents are in the document entrance,you cannot adjust the ringer volume. Confirmthat there are no documents in the entrance.Speaker volume8 levels (high to low) are available.While using the speakerphone,press or .Adjusting base unit volumes!1Handset is off the base unit:Press .2Dial the telephone number.3When finished talking, press or placethe handset on the base unit.OFFTALKWith the handsetPhone calls - making)1Press .2Dial the telephone number.3When the other party answers, talk into themicrophone.4When finished talking, press .SP-PHONESP-PHONEWith the base unitFax voice guidancevolume9 levels (high to off) are available.While listening to the fax voice guidance,press or .Answering device volume9 levels (high to off) are available.While listening to the recordedmessages, press or .To redial the last number1. Press or .2. Press .REDIALSP-PHONETALKKX-FPG391(E) (008-016) 04.4.15 5:28 PM Page 8
9Phone calls - answering)1Handset is off the base unit:Press when the handset rings.●You can also answer a call by pressingany dial key 0 to 9, , or #.(Any key talk feature)Handset is on the base unit:Lift the handset when the base unit rings.2When finished talking, press or placethe handset on the base unit.OFFTALKWith the base unit1When the base unit rings, press .2When finished talking, press .SP-PHONESP-PHONEWith the handsetSending a fax manually!1Adjust the width of the document guides tothe size of the document.2Insert the document (up to 10 pages) FACEDOWN until a single beep is heard and theunit grabs the document.3Press .4Dial the fax number.5When a fax tone is heard:Press .ORWhen the other party answers your call:Ask them to press their start button. Whenthe fax tone is heard, press .FAX/STARTFAX/STARTSP-PHONETo redial the last numberPress .●If the line is busy, the unit will automatically redial thenumber up to 2 times.●To cancel redialing, press .STOPREDIALKX-FPG391(E) (008-016) 04.4.15 5:28 PM Page 9
101When the unit rings, press orlift the handset to answer the call.2When:— document reception is required,— a fax calling tone (slow beep) is heard, or— no sound is heard,press .●The unit will start fax reception.FAX/STARTSP-PHONEReceiving Faxes!Receiving a fax using thebase unit1When the handset rings, press .2When:— document reception is required,— a fax calling tone (slow beep) is heard, or— no sound is heard,press *#9until a single beep isheard.●The unit will start fax reception.TALKReceiving a fax using thehandsetKX-FPG391(E) (008-016) 04.4.15 5:28 PM Page 10
11This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the rear of this equipment is a label that contains, among other information, a product identifier in the format US:ACJ----------.If requested, this number must be provided to the telephone company.• Registration No .....(found on the rear of the unit)• Ringer Equivalence No. (REN)...............................(found on the rear of the unit)A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant.The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0).To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company. For products approved after July 23, 2001, the REN for this product is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (e.g.,03 is a REN of 0.3).If this equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But if advance notice isn’t practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary.The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the operation of the equipment. If this happens the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted service.If trouble is experienced with this equipment, for repair or warranty information, please contact a Factory Servicenter or other Authorized Servicer. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved.Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission or corporation commission for information.This equipment is hearing aid compatible as defined by the FCC in 47 CFR Section 68.316.When you hold the phone to your ear, noise might be heard in your Hearing Aid. Some Hearing Aids are not adequately shielded from external RF (radio frequency) energy. If noise occurs, use an optional headset accessory or the speakerphone option (if applicable) when using this phone. Consult with your audiologist or Hearing Aid manufacturer about the availability of Hearing Aids which provide adequate shielding to RF energy commonly emitted digital devices.If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer.WHEN PROGRAMMING EMERGENCY NUMBERS AND(OR) MAKING TEST CALLS TO EMERGENCY NUMBERS:1) Remain on the line and briefly explain to the dispatcher the reason for the call.2) Perform such activities in the off-peak hours, such as early morning or late evenings.The software contained in this equipment to allow user access to the network must be upgraded to recognize newly established network area codes and exchange codes as they are placed into service. Failure to upgrade the premises systems or peripheral equipment to recognize the new codes as they are established will restrict the customer and the customer’s employees from gaining access to the network and to these codes.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Privacy of communications may not be ensured when using this phone.FCC and Other InformationKX-FPG391(E) (008-016) 04.4.15 5:28 PM Page 11
12CAUTION:Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this device.NOTE:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:— Reorient or relocate the receiving antenna.— Increase the separation between the equipment and receiver.— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.— Consult the dealer or an experienced radio/TV technician for help.Some cordless telephones operate at frequencies that may cause interference to nearby TVs and VCRs. To minimize or prevent such interference, the base of the cordless telephone should not be placed near or on top of a TV or VCR. If interference is experienced, move the cordless telephone further away from the TV or VCR. This will often reduce, or eliminate, interference.FCC RF Exposure Warning:This product complies with FCC radiation exposure limits set forth for an uncontrolled environment. To comply with FCC RF exposure requirements the base unit must be installed and operated with its antenna located 20 cm or more between antenna and all person’s body (excluding extremities of hands, wrist and feet). The handset unit may be carried and operated with only the specific provided belt-clip. Other non-tested belt-clips or similar body-worn accessories may not comply and must be avoided. The base and handset units must not be co-located or operated in conjunction with any other antenna or transmitter.This equipment is hearing aid compatible as defined by the FCC in 47 CFR Section 68.316.A TIA/EIA-IS-968 compliant telephone cord and modular plug is provided with this equipment. This equipment is designed to be connected to the telephone network or premises wiring using a compatible modular jack that is also TIA/EIA-IS-968 compliant.The software contained in this equipment to allow user access to the network must be ungraded to recognize newly established network area codes and exchange codes as they are placed into service.Failure to upgrade the premises systems or peripheral equipment to recognize the new codes as they are established will restrict the customer and the customer’s employees from gaining access to the network and to these codes.When you hold the phone to your ear, noise might be heard in your Hearing Aid. Some Hearing Aids are not adequately shielded from external RF (radio frequency) energy. If noise occurs, use an optional headset accessory or the speakerphone option (if applicable) when using this phone. Consult your audiologist or Hearing Aid manufacturer about the availability of Hearing Aids which provide adequate shielding to RF energy commonly emitted by digital devices.KX-FPG391(E) (008-016) 04.4.15 5:28 PM Page 12
13PANASONIC CONSUMER ELECTRONICS COMPANY, DIVISION OF MATSUSHITA ELECTRIC CORPORATION OF AMERICAOne Panasonic Way, Secaucus, New Jersey 07094PANASONIC SALES COMPANY,DIVISION OF MATSUSHITAELECTRIC OF PUERTO RICO, INC.,Ave. 65 de Infantería, Km. 9.5San Gabriel Industrial Park,Carolina, Puerto Rico 00985Panasonic Facsimile Product Limited WarrantyLimited Warranty CoverageIf your product does not work properly because of a defect in materials or workmanship, Panasonic Consumer Electronics Company or Panasonic Sales Company (collectively referred to as “the warrantor”) will, for the length of the period indicated on the chart below, which starts with the date of original purchase (“Limited Warranty period”), at its option either (a) repair your product with new or refurbished parts, or (b) replace it with a new or a refurbished product. The decision to repair or replace will be made by the warrantor.Batteries, antennas, optional accessories (such as additional handsets), ink film, toner cartridge, drum unit, and ink cartridge (as may be applicable), and cosmetic parts (cabinet) are not warranted under this Limited Warranty. During the “Labor” Limited Warranty period there will be no charge for labor. During the “Parts” Limited Warranty period, there will be no charge for parts. You must carry-in or mail-in your product during the Limited Warranty period. This Limited Warranty only applies to products purchased and serviced in the United States or Puerto Rico. This Limited Warranty is extended only to the original purchaser and only covers products purchased as new. A purchase receipt or other proof of the original purchase date is required for Limited Warranty service.Carry-In or Mail-In ServiceFor Carry-In or Mail-In Service in the United States call 1-800-HELP-FAX (1-800-435-7329)For assistance in Puerto Rico call Panasonic Sales Company (787)-750-4300 or fax (787)-768-2910. Limited Warranty Limits And ExclusionsThis Limited Warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The Limited Warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by the warrantor such as non Panasonic ink film, toner cartridge or drum unit, or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, signal reception problems, misadjustment of consumer controls, improper maintenance, power line surge, improper voltage supply, lightning damage, modification, or commercial use (such as in a hotel, office, restaurant, or other business), rental use of the product, service by anyone other than a Factory Servicenter or other Authorized Servicer, or damage that is attributable to acts of God.THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIMITED WARRANTY COVERAGE”. THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY. (As examples, this excludes damages for lost time, cost of having someone remove or re-install an installed unit if applicable, or travel to and from the servicer. The items listed are not exclusive, but are for illustration only.) ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY.FAX categories Parts LaborLaser FacsimileThermal Transfer Facsimile 6 Months1 (one) Year6 Months1 (one) YearLimited WarrantyKX-FPG391(E) (008-016) 04.4.15 5:28 PM Page 13
14Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied Limited Warranty lasts, so the exclusions may not apply to you.This Limited Warranty gives you specific legal rights and you may also have other rights which vary from state to state. If a problem with this product develops during or after the Limited Warranty period, you may contact your dealer or Servicenter. If the problem is not handled to your satisfaction, then write to the warrantor’s Consumer Affairs Department at the addresses listed for the warrantor.PARTS AND SERVICE WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY ARE YOUR RESPONSIBILITY.For In Limited Warranty product service• Call toll-free 1-800-HELP-FAX (1-800-435-7329) for the location of an authorized servicenter.For out of Limited Warranty technical and troubleshooting support: Panasonic offers two value based, cost effective, solutions:1. Panasonic Continued Services 900 fee based support: 1-900-FAX-HELP (1-900-329-4357)This exceptional service is charged directly to your telephone bill at only $1.99 per minute.2. Panasonic Premier Service Club (PPSC): 1-800-435-7329PPSC provides toll free troubleshooting support at only $7.99 for a one time sampler or $23.95 for a one year or 5 call membership. These services are billed directly to your major credit card.Both of these comprehensive programs provide real time, live agent support for customers who are not eligible for coverage under the limited warranty.Terms and prices are subject to change without notice.When you ship the product• Carefully pack your unit, preferably in the original carton.• Attach a letter, detailing the symptom or problem, to the outside of the carton.• Send the unit to an authorized servicenter, prepaid and adequately insured.• Do not send your unit to the Panasonic Consumer Electronics Company or to any executive or regional sales office. These locations do not repair consumer products.KX-FPG391(E) (008-016) 04.4.15 5:28 PM Page 14
15KX-FPG391(E) (008-016) 04.4.15 5:28 PM Page 15
Panasonic Consumer ElectronicsCompany, Division of MatsushitaElectric Corporation of AmericaOne Panasonic Way, Secaucus, New Jersey 07094Panasonic Sales Company,Division of Matsushita Electric ofPuerto Rico, Inc.Ave. 65 de Infantería, Km. 9.5San Gabriel Industrial Park, Carolina,Puerto Rico 00985Technical data about this product!Applicable Lines: Public Switched Telephone NetworkDocument Size: Max. 216 mm (81⁄2") in width / Max. 600 mm (235⁄8") in lengthEffective Scanning Width: 208 mm (83⁄16")Recording Paper Size: Letter: 216 mm x 279 mm (81⁄2"x 11")Legal: 216 mm x 356 mm (81⁄2"x 14")A4: 210 mm x 297 mm (81⁄4"x 1111 ⁄16")Effective Printing Width: Letter/Legal: 208 mm (83⁄16")A4: 202 mm (715⁄16")Transmission Time*: Approx. 15 s/page (Original mode)**Scanning Density: Horizontal: 8 pels/mm (203 pels/inch)Vertical: 3.85 lines/mm (98 lines/inch)–STANDARD mode7.7 lines/mm (196 lines/inch)–FINE/PHOTO mode15.4 lines/mm (392 lines/inch)–SUPER FINE modeHalftone Level: 64-levelScanner Type: Contact Image Sensor (CIS)Printer Type: Thermal Transfer on plain paperData Compression System:Modified Huffman (MH), Modified READ (MR)Modem Speed: 9,600 / 7,200 / 4,800 / 2,400 bps; Automatic FallbackOperating Environment: 5 °C – 35 °C (41 °F – 95 °F), 20% – 80% RH (Relative Humidity)Power Supply: 120 V AC, 60 Hz** Transmission speed depends upon the contents of the pages,resolution, telephone line conditions and capability of the otherparty’s machine.** Transmission speed is based upon the ITU-T No. 1 Test Chartand original mode.If the capability of the other party’s machine is inferior to yourunit, the transmission time may be longer.ITU-T No. 1 Test ChartNote:●Any details given in these instructions are subject to change without notice.●The pictures and illustrations in these instructions may vary slightly from the actual product.KX-FPG391(E) (008-016) 04.4.15 5:28 PM Page 16

Navigation menu