Panasonic of North America 96NKX-HNB600 DECT 6.0 Base with Wi-Fi User Manual Installation Manual English

Panasonic Corporation of North America DECT 6.0 Base with Wi-Fi Installation Manual English

Users Manual

Initial Setup Guide for Base UnitHome Network SystemModel No.    KX-HNB600Thank you for purchasing a Panasonic product.Please read this document before using the unit and save it for futurereference.For assistance, visit our Web site: http://www.panasonic.com/helpfor customers in the U.S.A. or Puerto Rico.
For your safetyTo prevent severe injury and loss of life/property, read this section carefully beforeusing the product to ensure proper and safeoperation of your product.WARNINGPower connectionRDo not overload power outlets andextension cords. This can result in the riskof fire or electric shock.RCompletely insert the AC adaptor/powerplug into the power outlet. Failure to do somay cause electric shock and/or excessiveheat resulting in a fire.RRegularly remove any dust, etc. from theAC adaptor/power plug by pulling it fromthe power outlet, then wiping with a drycloth. Accumulated dust may cause aninsulation defect from moisture, etc.resulting in a fire.RUnplug the product from power outlets if itemits smoke, an abnormal smell, or makesan unusual noise. These conditions cancause fire or electric shock. Confirm thatsmoke has stopped emitting and contact usat www.panasonic.com/contactinfoRUnplug from power outlets and never touchthe inside of the product if its casing hasbeen broken open.RNever touch the plug with wet hands.Danger of electric shock exists.InstallationRDo not allow the AC adaptor or telephoneline cord to be excessively pulled, bent orplaced under heavy objects.RDo not perform any actions (such asfabricating, twisting, stretching, bundling,forcibly bending, damaging, altering,exposing to heat sources, or placing heavyobjects on the power cable) that maydamage the power cable. Using the productwith a damaged power cable may causeelectric shock, short circuits, or fire. Contactan authorized service center for repairs.Operating safeguardsRUnplug the product from power outletsbefore cleaning. Do not use liquid oraerosol cleaners.RDo not disassemble the product.RDo not spill liquids (detergents, cleansers,etc.) onto the telephone line cord plug, orallow it to become wet at all. This maycause a fire. If the telephone line cord plugbecomes wet, immediately pull it from thetelephone wall jack, and do not use.RNever put metal objects inside the product.If metal objects enter the product, turn offthe circuit breaker and contact anauthorized service center.MedicalRConsult the manufacturer of any personalmedical devices, such as pacemakers orhearing aids, to determine if they areadequately shielded from external RF(radio frequency) energy. DECT featuresoperate between 1.92 GHz and 1.93 GHzwith a peak transmission power of 115 mW.Wi-Fi features operate between 2.412 GHzand 2.462 GHz with a peak transmissionpower of 100 mW.RDo not use the product in health carefacilities if any regulations posted in thearea instruct you not to do so. Hospitals orhealth care facilities may be usingequipment that could be sensitive toexternal RF energy.CAUTIONInstallation and locationRNever install wiring during an electricalstorm.RNever install telephone line jacks in wetlocations unless the jack is specificallydesigned for wet locations.RNever touch uninsulated telephone wires orterminals unless the telephone line hasbeen disconnected at the network interface.RUse caution when installing or modifyingtelephone lines.RThe AC adaptor is used as the maindisconnect device. Ensure that the ACoutlet is installed near the product and iseasily accessible.RDo not place magnetic cards or similarobjects near the product. Magnetic datamay be erased.2For assistance, please visit http://www.panasonic.com/helpInstallation
Important safetyinstructionsWhen using your product, basic safetyprecautions should always be followed toreduce the risk of fire, electric shock, andinjury to persons, including the following:1. Do not use this product near water forexample, near a bathtub, washbowl,kitchen sink, or laundry tub, in a wetbasement or near a swimming pool.2. Do not use a telephone to report a gasleak in the vicinity of the leak.3. Use only the power cord indicated in thisdocument.SAVE THESE INSTRUCTIONSFor best performanceBase unit location/avoiding noiseThe base unit and other compatible Panasonicunits use radio waves to communicate witheach other.EnvironmentRKeep the product away from electrical noisegenerating devices, such as fluorescentlamps and motors.RThe product should be kept free fromexcessive smoke, dust, high temperature,and vibration.RThe product should not be exposed todirect sunlight.RDo not place heavy objects on top of theproduct.RWhen you leave the product unused for along period of time, unplug the product fromthe power outlet.RThe product should be kept away from heatsources such as heaters, kitchen stoves,etc. It should not be placed in rooms wherethe temperature is less than 0 °C (32 °F) orgreater than 40 °C (104 °F). Dampbasements should also be avoided.Routine careRWipe the outer surface of the product with asoft moist cloth.RDo not use benzine, thinner, or anyabrasive powder.Notice for product disposal, transfer, orreturnRThis product can store your private/confidential information. To protect yourprivacy/confidentiality, we recommend thatyou erase information such as phonebookor caller list entries from the memory beforeyou dispose of, transfer, or return theproduct.Notice:•  This product is designed for use in the United States of America. Sale or use of this product in other countries may violate local laws.•  Cet appareil est conçu pour être utilisé aux États-Unis d’Amérique. La vente ou l’emploi de cet appareil dans certains autres pays peut constituer une infraction à la législation locale.•  Este producto está diseñado para usarse en los Estados Unidos de América.La venta o el empleo de este producto en ciertos países puede constituir violación de la legislación local.•  ҁౢࠔ஑ࣁऍ୯٬ҔԶ೛Ƕऩӧځд୯ৎᎍ୧܈٬ҔǴёૈ཮ၴϸ྽ӦݤٯǶ•  ࡇࡢ〇ရࡣࠊ᪥ᮏᅜእ࡛ࡢ౑⏝ࢆ┠ⓗ࡜ࡋ࡚タィࡉࢀ࡚࠾ࡾࠊ᪥ᮏᅜෆ࡛ࡢ౑⏝ࡣἲᚊ㐪཯࡜࡞ࡾࡲࡍࠋᚑࡗ࡚ࠊᙜ♫࡛ࡣ᪥ᮏᅜෆ࡟࠾࠸࡚ࡣཎ๎࡜ࡋ࡚ಟ⌮࡞࡝ࡢࢧ࣮ࣅࢫࡣ⮴ࡋ࠿ࡡࡲࡍࠋSecurity cautionsTake appropriate measures to avoid thefollowing security breaches when using thisproduct.– Leaks of private information– Unauthorized use of this product– Unauthorized interference or suspension ofthe use of this productTake the following measures to avoid securitybreaches:RConfigure the wireless router that connectsyour mobile device to this product to useencryption for all wireless communication.RDo not use passwords that could be easilyguessed by a third party. If you keep arecord of your passwords, protect thatrecord. Change passwords regularly.RIf you lose your mobile device, change thepassword used to access this product.For assistance, please visit http://www.panasonic.com/help 3Installation
RIf you enable the product’s auto loginfeature, enable the screen lock or similarsecurity feature on your mobile device.RTo prevent disclosure of personalinformation, enable the screen lock orsimilar security feature on your mobiledevice.RBefore disposing of the product, perform afactory data reset to erase any data storedin the product. Remove and erase the SDcard.RBefore handing the product over to a thirdparty for repair or other purposes, performa factory data reset to erase any datastored in the product and remove the SDcard. Use only trusted repair servicesauthorized by Panasonic.RWhen submitting the product for repair,make a note of any important informationstored in the product, as this informationmay be erased or changed as part of therepair process.RIf your mobile device will no longer be usedwith the product, delete your mobiledevice’s registration from the product anddelete the corresponding app from yourmobile device.RIf this product experiences a power outage,its date and time setting may becomeincorrect. In this case, the date and timesetting will be automatically corrected whenyour mobile device and this product areconnected to the same wireless network.Additionally, note the following.ROnly one mobile device can access thisproduct while away from home. If a secondmobile device connects to this productwhile away from home, the first mobiledevice is disconnected.RCommunications may be interrupteddepending on network conditions andwireless signal quality.RThis product may be used in ways thatviolate the privacy or publicity rights ofothers. You are responsible for the ways inwhich this product is used.Other informationTrademarksRmicroSDHC Logo is a trademark of SD-3C,LLC.RAll other trademarks identified herein arethe property of their respective owners.4For assistance, please visit http://www.panasonic.com/helpInstallation
FCC and otherinformationThis equipment complies with Part 68 of theFCC rules and the requirements adopted bythe ACTA. On the bottom of this equipment isa label that contains, among other information,a product identifier in the formatUS:ACJ----------.If requested, this number must be provided tothe telephone company.RRegistration No.............(found on thebottom of the unit)RRinger Equivalence No. (REN).......0.1BA plug and jack used to connect thisequipment to the premises wiring andtelephone network must comply with theapplicable FCC Part 68 rules andrequirements adopted by the ACTA. Acompliant telephone cord and modular plug isprovided with the product. It is designed to beconnected to a compatible modular jack that isalso compliant.The REN is used to determine the number ofdevices that may be connected to a telephoneline. Excessive RENs on a telephone line mayresult in the devices not ringing in response toan incoming call. In most but not all areas, thesum of RENs should not exceed five (5.0). Tobe certain of the number of devices that maybe connected to a line, as determined by thetotal RENs, contact the local telephonecompany. For products approved after July23, 2001, the REN for the product is part ofthe product identifier that has the formatUS:AAAEQ##TXXXX. The digits representedby ## are the REN without a decimal point(e.g., 03 is a REN of 0.3).If this equipment causes harm to thetelephone network, the telephone companywill notify you in advance that temporarydiscontinuance of service may be required.But if advance notice isn’t practical, thetelephone company will notify the customer assoon as possible. Also, you will be advised ofyour right to file a complaint with the FCC ifyou believe it is necessary.The telephone company may make changesin its facilities, equipment, operations orprocedures that could affect the operation ofthe equipment. If this happens the telephonecompany will provide advance notice in orderfor you to make necessary modifications tomaintain uninterrupted service.If trouble is experienced with this equipment,for repair or warranty information, pleasecontact a Factory Service Center or otherAuthorized Servicer. If the equipment iscausing harm to the telephone network, thetelephone company may request that youdisconnect the equipment until the problem isresolved.Connection to party line service is subject tostate tariffs. Contact the state public utilitycommission, public service commission orcorporation commission for information.If your home has specially wired alarmequipment connected to the telephone line,ensure the installation of this equipment doesnot disable your alarm equipment. If you havequestions about what will disable alarmequipment, consult your telephone companyor a qualified installer.This equipment is hearing aid compatible asdefined by the FCC in 47 CFR Section 68.316.When you hold the phone to your ear, noisemight be heard in your Hearing Aid. SomeHearing Aids are not adequately shielded fromexternal RF (radio frequency) energy. If noiseoccurs, use an optional headset accessory orthe speakerphone option (if applicable) whenusing this phone. Consult with your audiologistor Hearing Aid manufacturer about theavailability of Hearing Aids which provideadequate shielding to RF energy commonlyemitted by digital devices.WHEN PROGRAMMING EMERGENCYNUMBERS AND(OR) MAKING TEST CALLSTO EMERGENCY NUMBERS:1. Remain on the line and briefly explain tothe dispatcher the reason for the call.2. Perform such activities in the off-peakhours, such as early morning or lateevenings.This device complies with Part 15 of the FCCRules. Operation is subject to the followingtwo conditions:(1) This device may not cause harmfulinterference, and (2) this device must acceptany interference received, includinginterference that may cause undesiredoperation.Privacy of communications may not beensured when using this phone.For assistance, please visit http://www.panasonic.com/help 5Installation
CAUTION:Any changes or modifications not expresslyapproved by the party responsible forcompliance could void the user’s authority tooperate this device.NOTE:This equipment has been tested and found tocomply with the limits for a Class B digitaldevice, pursuant to Part 15 of the FCC Rules.These limits are designed to providereasonable protection against harmfulinterference in a residential installation. Thisequipment generates, uses, and can radiateradio frequency energy and, if not installedand used in accordance with the instructions,may cause harmful interference to radiocommunications. However, there is noguarantee that interference will not occur in aparticular installation. If this equipment doescause harmful interference to radio ortelevision reception, which can be determinedby turning the equipment off and on, the useris encouraged to try to correct the interferenceby one or more of the following measures:– Reorient or relocate the receiving antenna.– Increase the separation between theequipment and receiver.– Connect the equipment into an outlet on acircuit different from that to which thereceiver is connected.– Consult the dealer or an experienced radio/TV technician for help.Some cordless telephones operate atfrequencies that may cause interference tonearby TVs and VCRs. To minimize orprevent such interference, the base of thecordless telephone should not be placed nearor on top of a TV or VCR. If interference isexperienced, move the cordless telephonefurther away from the TV or VCR. This willoften reduce or eliminate interference.FCC RF Exposure Warning:RThis product complies with FCC radiationexposure limits set forth for an uncontrolledenvironment.RTo comply with FCC RF exposurerequirements, the base unit must beinstalled and operated 20 cm (8 inches) ormore between the product and all person’sbody.RThis product may not be collocated oroperated in conjunction with any otherantenna or transmitter.RFor body-worn operation, the handset mustbe used only with a non-metallic accessory.Use of other accessories may not ensurecompliance with FCC RF exposurerequirements.Notice:RFCC ID can be found inside the batterycompartment or on the bottom of the units.6For assistance, please visit http://www.panasonic.com/helpInstallation
Physical featuresCBAD E FG H ISpeakerStatus lightDC jackTEL jackWI-FI SETUP buttonmicroSD card slotHANDSET/LOCATOR buttonCAMERA buttonOTHER DEVICE buttonConnectionsInsert the AC adaptor plug firmly into theDC jack.Secure the AC adaptor cord by wrappingaround the hook.Connect the AC adaptor to the poweroutlet.Insert the telephone line cord into the TELjack and the telephone line jack until youhear a click.DSL/ADSL service users only: Connectyour DSL/ADSL filter (not supplied).Insert the SD card.Note:RUse only the supplied Panasonic ACadaptor PNLV241.DEDCBA21FFor assistance, please visit http://www.panasonic.com/help 7Setup
Wall mounting1Attach the wall mount bracket to the wall.xx mm(xx in.)2Attach the base unit to the wall mountbracket.SpecificationsRFrequency rangeDECT:1.92 GHz–1.93 GHzWi-Fi:2.412 GHz–2.462 GHz (channels 1–11)RPower source120 V AC, 60 HzROperating conditions0 °C–40 °C (32 °F–104°F)20%–80% relative air humidity (dry)8For assistance, please visit http://www.panasonic.com/helpSetup
Two Riverfront Plaza, Newark, NJ 07102-5490© Panasonic System Networks Co., Ltd. 2014Printed in China

Navigation menu