Panasonic of North America 96NKX-PRW130 DECT 6.0 Base with Wi-Fi User Manual For TA manual PRW130 USA

Panasonic Corporation of North America DECT 6.0 Base with Wi-Fi For TA manual PRW130 USA

Users Manual

Premium Design Phone with Home Phone ConnectModel No.  KX-PRW130
*1 See page 2 for replacement battery information.*2 The handset cover comes attached to the handset.①②③④Accessory item Model numberRechargeable HHR-4DPA*1batteries Battery type:–Nickel metal hydride (Ni-MH)–2 x AAA (R03) size for each handsetT-adaptor KX-J66Range extender KX-TGA405*2Key detector KX-TGA20*3*1 Replacement batteries may have a different capacity from that of the supplied batteries.*2 By installing this unit, you can extend the range of your phone system to include areaswhere reception was previously not available. This product can be purchased online. Pleasevisit our Web site: http://www.panasonic.com/RangeExtender*3 By registering the key detector (4 max.) to a Panasonic Digital Cordless Phone andattaching it to an easy-to-lose item in advance, you can locate and find the mislaid item towhich the key detector is attached. Please visit our Web site:http://panasonic.net/pcc/products/telephone/p/tga20/L Design and specifications are subject to change without notice.L The illustrations in these instructions may vary slightly from the actual product.①No. QuantityHandset cover*2Rechargeable batteries*1Telephone line cord/PQJA10075ZAC adaptor/PNLV236ZAccessory item/Part number1211④③②
You can expand your phone system byregistering optional handsets (6 max.) to asingle base unit.L Optional handsets may be a different color    from that of the supplied handsets.Your smartphone: 4 max.You can expand your phone system by installing the SmartphoneConnect app on your smartphone and registering your smartphoneto the base unit.L You must configure the base unit and download the app before    you can use these features. See the “Smartphone Integration”    chapter beginning for more information.Handset (optional): KX-PRWA13
2.
L Communication standards    DECT 6.0 (Digital Enhanced Cordless    Telecommunications 6.0),    Wi-Fi (IEEE 802.11 b/g/n)L Frequency range    DECT:    1.92 GHz to 1.93 GHz    Wi-Fi:    2.412 GHz to 2.462 GHz (channels 1 to 11)L RF transmission power    DECT:    115 mW (max.)    Wi-Fi:    100 mW (peak transmission power)L Encryption    WPA2-PSK (TKIP/AES), WPA-PSK (TKIP/    AES), WEP (128/64 bit)L Simplified configuration    WPS (PBC)L Power source    120 V AC, 60 HzL Power consumption    Base unit:    Standby: Approx. 2.0 W    Maximum: Approx. 3.9 WL Operating conditions    0 °C – 40 °C (32 °F – 104 °F), 20 % – 80 %    relative air humidity (dry)Note:L Design and specifications are subject to    change without notice.L The illustrations in these instructions may    vary slightly from the actual product.
■Base unit■Base unit①  Press the AC adaptor plug firmly to the       unit.②  Keep the plug in the horizontal position      and fasten the cord by hooking it.③  Connect the AC adaptor to the power      outlet.④  Connect the telephone line cord to the unit      and single-line telephone line jack (RJ11C)      until you hear a click.⑤  ADSL/ADSL filter (not supplied) is      required if you have a DSL/ADSL service.Note:  L Use only the supplied Panasonic AC    adaptor PNLV236.
.OFF
...
Program this setting using either the baseunit or one of the handsets. (Fewer operations areneeded when using the base unit.)Press the WPS button on your wireless router.Press and hold 【WiFi SETUP】 button on thebase unit for about 5 seconds and then waitfor a long beep to sound.

Navigation menu