Panasonic of North America 96NKX-TD7694 2.4GHz PORTABLE STATION CORDLESS HANDSET User Manual PSQX4318ZA TD7694 OI

Download:
Mirror Download [FCC.gov]
Document ID	799809
Application ID	bko2xZbc+zHk8w/yfbgsgQ==
Document Description	USERS MANUAL 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	303.92kB (3799007 bits)
Date Submitted	2007-06-04 00:00:00
Date Available	2007-06-05 00:00:00
Creation Date	2007-05-23 14:09:33
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2007-05-23 14:39:44
Document Title	PSQX4318ZA_TD7694_OI.book
Document Creator	FrameMaker 7.0
Document Author:	Saito

Operating Instructions
2.4 GHz Portable Station
Model No.
KX-TD7694
Thank you for purchasing a Panasonic 2.4 GHz Portable Station.
Please read this manual carefully before using this product and save this
manual for future use.
Please use only the battery provided and charge the battery for about 7 hours
before using the handset for the first time.
See page 66 for System Requirements.
Document Version 2007-06
Table of Contents
Before Initial Use.............................................................................................. 4
Accessories (included) .......................................................................................4
Installation............................................................................................................5
Battery Installation..............................................................................................5
Charger Connection ...........................................................................................5
Charging the Battery ..........................................................................................5
Charger Wall Mounting ......................................................................................6
Attaching the Belt Clip........................................................................................6
Before Operating the Handset ........................................................................ 7
Location of Controls ...........................................................................................7
Key Lock ............................................................................................................8
Meeting Mode ....................................................................................................9
Selecting the Display Language ......................................................................10
Editing the Standby Display Name ..................................................................10
Editing the Names of the Flexible CO Keys ....................................................11
Adjusting the Ringer Volume ...........................................................................12
Adjusting the Ringer Volume or Turning the Ringer off while Ringing .......12
Changing the Vibrate Setting ...........................................................................13
Adjusting the Receiver/Speaker/Headset Volume..........................................13
Display................................................................................................................14
Soft Keys ............................................................................................................15
Operation Outline ..............................................................................................17
Function Menus .................................................................................................18
Function Keys....................................................................................................19
Flexible CO Keys ...............................................................................................20
Operation ........................................................................................................ 21
Making Calls.......................................................................................................21
Searching for an item stored in the Phonebook ...............................................24
Receiving Calls ..................................................................................................27
Caller ID ...........................................................................................................28
During a Conversation ......................................................................................29
Useful Features..................................................................................................30
Making Use of the Voice Mail Service .............................................................34
Using the Handset Phonebook..................................................................... 35
Handset Phonebook..........................................................................................35
Private Ring......................................................................................................35
Storing an Item in the Handset Phonebook ....................................................35
Storing a New Item...........................................................................................35
Editing a Stored Item........................................................................................36
Storing an Item Using the Predialing................................................................37
Storing an Item Using the Outgoing Call Log...................................................37
Storing an Item Using the Incoming Call Log...................................................38
Storing an Item Using the PBX System Phonebook ........................................39
Storing an Item Using the PBX Extension Phonebook ....................................39
Editing Category Names ..................................................................................40
Assigning Hot Keys...........................................................................................41
Entering Characters ..........................................................................................42
Document Version 2007-06
Character Mode Table ..................................................................................... 43
Locking the Handset Phonebook .................................................................... 44
Locking the Handset Phonebook ..................................................................... 44
Unlocking the Handset Phonebook ................................................................. 44
Unlocking the Handset Phonebook Temporarily ............................................. 44
Deleting Stored Items.................................................................................... 45
Deleting Stored Items in Handset Phonebook/Hot Key Dial/Outgoing Call
Log/Incoming Call Log ..................................................................................... 45
Handset Phonebook ........................................................................................ 45
Hot Key Dial ..................................................................................................... 45
Outgoing Call Log ............................................................................................ 46
Incoming Call Log ............................................................................................ 46
Configuring Handset Settings ...................................................................... 47
Changing the Initial Settings............................................................................ 47
Handset Setting Menu Layout ......................................................................... 48
Memo Alarm Setting ........................................................................................ 55
Troubleshooting and Error Messages ......................................................... 57
Troubleshooting ................................................................................................ 57
Error Messages ................................................................................................. 59
Important Information ................................................................................... 60
Battery Information ........................................................................................... 60
Important Safety Instructions .......................................................................... 61
FCC Information ................................................................................................ 63
Customer Information ...................................................................................... 64
Other Important Information ............................................................................ 65
Document Version 2007-06
Before Initial Use
Please read “Important Information” on page 60 before using. Read and understand
all instructions.
Accessories (included)
Accessories (included)
AC adaptor ....................... One
Charger ............................ One
Battery .............................. One
[Part No.]
[Part No.]
[Part No.]
PQLV207
PSWETD7694M
N4HHGMB00005 or HHR-P103
Belt Clip ............................ One Battery Cover ................... One
Screws and Washers ....... Two
[Part No.]
[Part No.]
[Part No.]
PSKE1093Z1
PSYNTD7694MR
Screws: PQHE5004Y
Washers: XWG35FJ
•
To order accessories, call toll free 1-800-332-5368.
Document Version 2007-06
Before Initial Use
Installation
Installation
Battery Installation
Battery Installation
Insert the battery, and close the cover as indicated below.
Charger Connection
Charger Connection
Connect the AC adaptor to the charger.
•
To AC Outlet
•
•
The AC adaptor should be connected to a
vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight
of the adaptor may cause it to become
disconnected.
Fasten the AC adaptor cord to the cord
holder.
Use only the Panasonic AC adaptor
PQLV207.
Charging the Battery
Charging the Battery
At the time of shipment, the battery is not charged. Please charge the battery for about
7 hours before using the handset for the first time.
•
•
To AC Outlet •
•
Document Version 2007-06
When the battery has been completely charged, the charge indicator will change from red to green.
For more information, refer to “Battery Information” on page 60.
It is normal for the handset and
charger to feel warm while the battery is charging.
Keep devices sensitive to magnetic
fields away from the charger.
Use only the included charger.
Before Initial Use
Charger Wall Mounting
Charger Wall Mounting
1. Install the two included screws in the wall, spacing them 24.5 mm (1
in) apart.
24.5 mm
(1 in)
for charger
24.5 mm
(1 in)
Washer
Screws
Drive the screw
to this point.
2. Mount the charger securely on the wall.
Attaching the Belt Clip
Attaching the Belt Clip
You can attach the handset to your belt by following the steps below.
[To attach]
[To remove]
Allows phone straps and similar objects to be connected.
Insert the clip into the designated notches in the
handset.
Remove the belt clip.
Document Version 2007-06
Before Operating the Handset
Location of Controls
Location of Controls
[Back View]
The headset is an option.
Please use only a Panasonic
headset below:
KX-TCA86/KX-TCA88HA/
KX-TCA91/KX-TCA92
Speaker
Open the cover.
K LPress POWER for
more than 2 seconds.
L [Power On]
Standby mode
M [Power Off]
N Blank display
Up
Left
Right
Down
You can use the Joystick to move the cursor
in the desired direction.
Press the center button
to confirm a selection.
Document Version 2007-06
Before Operating the Handset
A Ringer/Charger Indicator
B Headset Jack
J Display
Refer to “Display” on page 14.
C TALK/SP-PHONE (Speakerphone) Key K Left/Right Soft Key
Used to make or answer calls, or toggle
between the Receiver/Hands-free*1
mode during a conversation.
D HOLD Key
Used to place a call on Hold.
E Meeting Mode Key
Used to select the function displayed
directly above each key. Functions are
displayed based on the current context.
L POWER/CANCEL Key
Used to end calls, exit the Phonebook or
Function mode, or turn the handset on or
off.
Used to turn Meeting Mode on or off
M Joystick
when pressed for more than 2 seconds in
Used to adjust the ringer/receiver volstandby mode.
ume, select Function menus and the
For more information, refer to “Meeting
function displayed directly above it, and
Mode” on page 9.
to move the cursor to select a desired
item.
F Message Key
Used to leave a message waiting indication, or to call back the party who left a
message waiting indication.
G Charge Contact
H Microphone
N TRANSFER/CLEAR Key
Used to transfer a call to another party,
or to clear digits or characters.
O INTERCOM Key
Used to make or answer intercom calls.
I Receiver
*1 You can talk with the other party alternately through the speaker in a quiet room.
During a conversation using a headset, Hands-free mode does not work.
Key Lock
Key Lock
You can lock all keys other than the Joystick while the handset is in standby mode.
[Display Icon]
Unlocked
Locked
Press the Joystick for more than 2 seconds to
lock/unlock.
Document Version 2007-06
Before Operating the Handset
Meeting Mode
Meeting Mode
Meeting Mode allows you to turn off the ringer and set the handset to vibrate when calls
are received. This can be useful in situations where you do not want to be disturbed, such
as during a meeting.
When Meeting Mode is active, the microphone’s sensitivity is increased, and the following
features are turned off automatically, regardless of their settings.
– Ringer Volume
– Ring On Charger
– Auto Answer
– Key Tone
– Range Alarm
– Low Battery Alarm
•
If you set the handset on the charger during Meeting Mode, the handset will not
vibrate*1.
*1 Please note that if you set the handset on the charger while receiving an incoming call, vibration
will stop. Once the vibration stops, the handset will not vibrate again for that call, even if the
handset is lifted up again. (If Quick Answer is set, lifting up the handset will answer the call.)
Document Version 2007-06
Before Operating the Handset
Selecting the Display Language
Selecting the Display Language
You can select the desired language (English/Spanish/French).
•
•
Press the Joystick.
Select “
Setting Handset”.
Press the Joystick.
Select “Language”.
Press the Joystick.
Select the desired language.
(Auto/English/Español/
FRANÇAIS)
Select “DisPress the Joyplay Option”. stick.
Press the Joystick.
When set to “Auto”, the language settings of the PBX will be used.
The display language of both the handset and PBX can be selected, and both should
be set to the same language. For more information, refer to the user documentation for
your PBX.
Editing the Standby Display Name
Editing the Standby Display Name
You can edit the name of the standby mode display of the handset.
Press the Joystick.
Select “
Setting Handset”.
Press the Joystick.
Select “Display
Option”.
Press the Joystick.
Select “Standby
Display”.
Press the Joystick.
Select “Edit”.
Enter name.
(max. 16 characters)
Press the Joystick.
•
10
Press the Joystick.
To enter characters, see page 42.
Document Version 2007-06
Before Operating the Handset
Editing the Names of the Flexible CO Keys
Editing the Names of the Flexible CO Keys
You can edit a name for each flexible CO key of the handset.
Press the Joystick.
Select “
Setting Handset”.
Press the Joystick.
Select “Key
Option”.
Press the Joystick.
Select “F-CO
Key Name”.
Press the Joystick.
Select the
desired base.
(Base 1-4)
Press the Joystick.
Select the desired
flexible CO key.
Enter name.
(max. 12 characters)
Press the Joystick.
•
Press the Joystick.
To enter characters, see page 42.
Document Version 2007-06
11
Before Operating the Handset
Adjusting the Ringer Volume
Adjusting the Ringer Volume
Press the Joystick.
Select “
Ringer Volume”.
Press the Joystick.
Select the desired setting. (Step Up/Step
Down/Level 1-6/Off)
Press the Joystick.
•
To set the ringer pattern, see page 49.
Adjusting the Ringer Volume or Turning the Ringer off
while Ringing
Adjusting the Ringer Volume or Turning the Ringer off while Ringing
While receiving a call
[To adjust the ringer volume]
Move the Joystick UP or DOWN to adjust the volume.*1
[To turn the ringer off]
OR
Press the Joystick.
Press CANCEL.
*1 The adjusted volume level will also be used for subsequent calls.
•
12
If you attach the headset while receiving an incoming call, the ring from the handset
does not switch to the headset. If you attach the headset before receiving an incoming
call, and headset tone is set to on, a tone will be heard from the headset. If Vibrate is
set to on, the handset will vibrate whether a headset is attached or not.
Document Version 2007-06
Before Operating the Handset
Changing the Vibrate Setting
Changing the Vibrate Setting
•
Press the Joystick.
Select “
Setting Handset”.
Press the Joystick.
Select “Incoming Option”.
Select
“Vibrate”.
Press the Joystick.
Select one of the following:
– Vib.& Ring
– Vib.→ Ring
– Off
Press the Joystick.
Press the Joystick.
To set Vibrate only, without ringing, select “Vib.& Ring” and set the Ringer Volume to
off, or turn Meeting Mode on. (See page 9, 12.)
Adjusting the Receiver/Speaker/Headset Volume
Adjusting the Receiver/Speaker/Headset Volume
During a conversation
Move the Joystick UP or DOWN to adjust the volume.
(Receiver Volume—Level 1-4, Speaker Volume—Level 1-6, Headset Volume—Level 1-4)
Document Version 2007-06
13
Before Operating the Handset
Display
Display
Date and Time Display
Soft Keys (See page 15.)
Incoming Call Log Status
Auto Answer
Within range of a Cell Station (CS)
Call Forwarding (See page 30.)
Out of range
Do Not Disturb (See page 30.)
Intercom Indicator
Ringer Volume OFF (See page 12.)
Off-hook Status
Meeting Mode (See page 9.)
Message Waiting
Vibrate (See page 13.)
Phonebook
Battery Indicator*1
Extension Number
To edit the standby display name, see page 10.
Full
Low
Needs to be charged.
*1 Refer to “Battery Information” on page 60.
14
Document Version 2007-06
Before Operating the Handset
Soft Keys
Soft Keys
Icons and information shown on the display will vary depending on the context. To select
an item shown on the display, press the corresponding soft keys.
Opens the Phonebook.
Pressing this key for more than 2
seconds locks the Phonebook.
Displayed when in Special character
entry mode.
Pressing this key switches to Alphabetic character entry mode.
Displayed when in Phonebook Lock.
Pressing this key and then entering
the password (default: 1234),
unlocks the Phonebook temporarily.
Pressing for more than 2 seconds,
then entering the password (default:
1234), unlocks the Phonebook.
Inserts a dialing pause.
Stores a new item in the Phonebook.
CLR
Clears digits or characters.
Opens the PBX System Phonebook.
Turns the microphone mute on or off
during a conversation.
Flashes when Mic Mute is on.
Opens the PBX Extension Phonebook.
Turns the ringer off.
Displays the caller information
stored in the Handset Phonebook
while receiving a call.
Opens the main menu.
Pressing this key for more than 2
seconds locks all keys.
Displays the caller information
stored in the system while receiving
a call.
Returns to the previous display.
Establishes a multiple-party conversation (Conference).
Opens the list menu (edit/delete in
the Phonebook, etc.).
Searches for an item in the Phonebook alphabetically.
Confirms the entry.
Displayed when in Alphabetic character entry mode.
Pressing this key switches to
Numeric character entry mode.
Displayed when in Key Lock mode.
Pressing this key for more than 2
seconds unlocks the keys.
Displayed when in Numeric character entry mode.
Pressing this key switches to Special character entry mode.
Advances to the next display.
Document Version 2007-06
15
Before Operating the Handset
16
Displays the Outgoing Call Log.
Used to clear the Memo Alarm display setting.
Displays the last dialed number.
Used to enter an “X” when storing
the Line Access CD.
Opens the Incoming Call Log.
Disconnects the current call and
make another call without hanging
up.
Opens the Incoming Call Log
Group.
Used to register the handset with
the PBX simply.
Used to select an item when in setting mode.
Displayed when it is possible to use
an arrow key to make a selection.
Used to select AM or PM when setting the Memo Alarm feature.
Displayed when the corresponding
soft key has no function.
Document Version 2007-06
Before Operating the Handset
Operation Outline
Operation Outline
Handset functions are accessed through the display menu and selected with the Joystick
and soft keys. The guidance display is shown in standby mode for easy operation.
[Function Keys]
[In standby mode] *1
[Flexible CO Keys]
[Handset Phonebook]
[Incoming Call Log] *2
[Outgoing Call Log]
[PBX System Phonebook]
[PBX Extension Phonebook]
[Incoming Call Log Group]
[Main Menu]
*1 You can select whether the guidance display is shown or not. (See page 52.)
*2 Moving the Joystick
•
displays the phone number.
To enter characters, see page 42. To search for an item stored in the Phonebook, see
page 24.
Document Version 2007-06
17
Before Operating the Handset
Function Menus
Function Menus
Press the Joystick to display the main and sub menus.
Main Menu—While in Standby Mode
Ringer Volume:
Accesses the “Ringer Volume” setting.
New Phonebook:
Stores a new item in the Phonebook.
Memo Alarm:
Accesses the “Memo Alarm” settings.
Setting Handset:
Accesses the “Setting Handset” settings.
PBX Program:
Enters PBX Personal Programming mode.
For PBX Personal Programming, refer to the user documentation for your PBX. Press
to exit from PBX Personal
Programming mode.
Sub Menu—While Off-hook/During a Conversation
Phonebook:
Opens the Phonebook.
New Phonebook:
Stores a new item in the Phonebook.
Outgoing Call Log:
Enters the Outgoing Call Log.
Incoming Call Log:
Enters the Incoming Call Log.
18
Document Version 2007-06
Before Operating the Handset
Function Keys
Function Keys
Functions of the handset can be activated through the display key list.
Move the Joystick
to display the feature key list.
1: Redial
Redials the last dialed number.
2: Fwd/DND
Displays and/or sets Call Forwarding and Do Not Disturb.
3: Flash/Recall
Disconnects the current call and make another call without hanging
up.
4: Auto Answer
Answers an incoming call automatically in hands-free mode.
“A.Ans” is displayed in standby mode.
5: Conference
Establishes a multiple-party conversation.
6: Pause
Inserts a dialing pause.
7: Auto Dial
Makes a call through PBX Personal/System Speed Dialing.
0: PBX Program
Enters PBX Personal Programming mode. Press
PBX Personal Programming mode.
•
to exit from
For PBX Personal Programming, refer to the user documentation for your PBX.
Shortcut Combinations
•
•
Redial
Conference
Fwd/DND
Pause
Flash/Recall
Auto Dial
Auto Answer
PBX Program
For operation, see page 21.
To edit the function key list, see page 51.
Document Version 2007-06
19
Before Operating the Handset
Flexible CO Keys
Flexible CO Keys
A flexible CO key can be used either to seize a line in order to make or receive an outside
call (F-CO key), or used as a function key. Move the Joystick
to display the flexible CO
key list. Here you can access the 12 flexible CO keys. The icon shown beside each F-CO
key indicates line status similarly to the LED indicators on a Proprietary Telephone; is
the same as a green LED, and is the same as a red LED.
[Example]
Understanding the F-CO Key Icons*1
(on):
You are currently using this line.
(flashing rapidly):
You have an incoming call on this line.
(An outside call is coming in on a single extension.)
(flashing slowly):
You have a call on hold on this line.
(on):
This line is in use by someone else.
(flashing rapidly):
You have an incoming call on this line.
(An outside call is coming in on multiple extensions simultaneously.)
(flashing slowly):
Someone has a call on hold on this line.
(no icon)
This line is idle.
*1 The meanings of these icons vary depending on the status of the CO line.
•
To select a key, press its key number, or move the Joystick
•
•
To edit the names of flexible CO keys, see page 11.
For more information, refer to the feature documentation for your PBX.
and press
20
to select the desired key
Document Version 2007-06
Operation
Making Calls
Making Calls
Calling
To an extension
Extension No.
To an outside party
To use the Line Access Numbers
OR
Outside Phone No.
CO Line Group No.
To use Flexible CO Keys
(idle CO key no. [0-9, , #])
OR
Outside Phone No.
(idle CO key)
To use Hot Key Dial*1
(Press the dialing key assigned as a Hot Key for more than 1 second.)
To use the Outgoing Call Log*2
To use the Incoming Call Log
To use the Incoming Call Log Group
Incoming Call Log Group No.
To use the Handset Phonebook*3
Name*4
Document Version 2007-06
OR
(if required)
21
Operation
Calling
To use the PBX System Phonebook*2 *3
Name*4
OR
(if required)
To use the PBX Extension Phonebook*3
Name*4
OR
(if required)
One-touch Dialing
To store
(“
PBX Program”)
(F-CO Key)
OR
Desired No.
To dial
(One-touch Dialing key)
Hot Line
To store
Desired Phone No.
To set/cancel
Set
Cancel
To dial
Operator Call
22
Document Version 2007-06
Operation
System Speed Dialing
To dial
System Speed Dial No. (3 digits)
Doorphone Call
Doorphone No. (2 digits)
Automatic Callback Busy
To set
While hearing a busy tone
To cancel
To answer from an idle extension
While hearing a callback ring
To answer from an idle outside line
While hearing a callback ring
Outside Phone No.
*1 To assign a phone number to a Hot Key, see page 41.
*2 When a call is made using the PBX System Phonebook, the called party’s name is not stored in
the Outgoing Call Log. To log the name as well as the number, copy the item into the Handset
Phonebook before dialing it. (See page 39.)
*3 To store an item in the Phonebook, see page 35.
To search for an item stored in the Phonebook, see page 24.
*4 This step can be omitted.
•
•
•
•
To enter characters, see page 42.
You can confirm that the number was dialed correctly before calling (Predialing) by
entering the number, then pressing
To clear an entire number while predialing, press
for more than 1 second.
If an outside call is received from a phone number stored in the Handset Phonebook,
the number and name of the caller will be displayed in the call log.
•
To cancel dialing, press
•
•
If “
” flashes, move closer to the CS and dial again.
For more information, refer to the user documentation for your PBX.
Document Version 2007-06
23
Operation
Searching for an item stored in the Phonebook
Searching for an item stored in the Phonebook
You can search for an item in the Phonebook by following the steps below.
Handset Phonebook
Scrolling through all items
Press the Left
Soft Key.
Press the Joystick UP or DOWN repeatedly.
Searching by name or first character(s) of name
Enter name or first character of the desired name.
Press the Left
Soft Key.
OR
Press the
Joystick.
Move the Joystick
UP or DOWN.
Select the desired
item. (if required)
Searching by category
Press the Left
Soft Key.
Press #.
Select the desired
Category Number.
Press the Joystick.
Move the Joystick
UP or DOWN.
Select the desired
item. (if required)
OR
Enter name.
*1
Press the
Joystick.
*1 This step can be omitted.
•
•
To enter characters, see page 42.
While an item is displayed you can:
–
24
Return to the “” display by pressing
item.
, then search for another
Document Version 2007-06
Operation
–
Search for another item by pressing the dial key that corresponds to the letter you
are searching for. If there is no entry that corresponds to the letter you selected, the
next entry will be displayed.
PBX System Phonebook
Scrolling through all items
Press the Left
Soft Key.
Press the Left
Soft Key.
Press the Joystick UP or DOWN repeatedly.
Searching by name or first character(s) of name
Enter name or first character of the desired
name.
Press the Left
Soft Key.
Press the Left
Soft Key.
OR
Press the Joystick.
•
•
Move the Joystick
UP or DOWN.
Select the desired
item. (if required)
To enter characters, see page 42.
While an item is displayed you can:
–
–
Return to the “” display by pressing
, then search for another
item.
Search for another item by pressing the dial key that corresponds to the letter you
are searching for. If there is no entry that corresponds to the letter you selected, the
next entry will be displayed.
Document Version 2007-06
25
Operation
PBX Extension Phonebook
Scrolling through all items
Press the Left
Soft Key.
Press the Left
Soft Key.
Press the Left
Soft Key.
Press the Joystick UP or
DOWN repeatedly.
Searching by name or first character(s) of name
Enter name or first
character of the
desired name.
Press the Left
Soft Key.
Press the Left
Soft Key.
Press the Left
Soft Key.
OR
Press the Joystick.
•
•
Select the desired
item. (if required)
To enter characters, see page 42.
While an item is displayed you can:
–
–
26
Move the Joystick
UP or DOWN.
Return to the “” display by pressing
, then search for another
item.
Search for another item by pressing the dial key that corresponds to the letter you
are searching for. If there is no entry that corresponds to the letter you selected, the
next entry will be displayed.
Document Version 2007-06
Operation
Receiving Calls
Receiving Calls
Receiving
An Intercom Call/An Outside Call/An Group Call
An Intercom Call
An Outside Call on a specific line
(rapidly flashing F-CO key [0-9, , #])
OR
(rapidly flashing F-CO key)
Call Pickup
Directed
Extension No.
Group
Group No. (2 digits)
•
•
•
You can also answer a call with the following features:
– Any Key Answer (See page 51.)
– Quick Answer (See page 51.)
– Auto Answer (See page 51.)
You can select the ringer, LED, and vibrate pattern for each type of incoming call. (See
page 49.)
For more information, refer to the user documentation for your PBX.
Document Version 2007-06
27
Operation
Caller ID
Caller ID
If an outside call that contains Caller ID information (a caller’s name and telephone
number) is received, this information will be logged in the incoming call log and displayed
on the handset in one of the two following ways.
– If the caller’s information is stored in the PBX, that information can be displayed.
–
If the caller’s information is stored in the handset, that information can be displayed.
•
If information is stored in both the PBX and in the handset for the same caller, you can
choose which information will be displayed on the handset. Caller information stored in
the PBX is displayed by default. (See “Caller ID Disp” on page 52.) If you set the
handset to display the caller information stored in the handset, caller information stored
in the PBX will be displayed if the caller is not stored in the handset. When receiving a
call, you can display the information stored in the handset by pressing
the information stored in the PBX by pressing
•
The caller information can be displayed even if a line access number, outside line
number, or P (
28
, and display
) is stored in the Phonebook. (See “Line Access CD” on page 54.)
Document Version 2007-06
Operation
During a Conversation
During a Conversation
Transferring a Call
To an extension
Extension No.
To an outside party
OR
Outside Phone No.
CO Line Group No.
Holding
To hold (Regular Hold)
To hold (Exclusive Call Hold)
To retrieve a call
An Intercom Call
An Outside Call
(slowly flashing F-CO key [0-9, , #])
OR
(slowly flashing F-CO key)
Three-party Conference
To add another party during a conversation
Desired Phone No.
(Talk to the new party.)
(Talk with multiple parties.)
To leave a conference
•
•
To return to the call before the transfer destination answers, press .
The method used to hold a call depends on the Call Hold mode (Regular Hold/
Exclusive Call Hold). Ask your manager what the current mode is.
Document Version 2007-06
29
Operation
•
•
When you hold several outside calls, you need to assign F-CO Keys (Single Line/Loop
Line/Trunk Group) as necessary beforehand.
For more information, refer to the user documentation for your PBX.
Useful Features
Useful Features
Call Forwarding
Both Calls
Outside Calls
Intercom Calls
Destination
Extension No.
All Calls
Busy
No answer
Busy/No answer
OR
CO Line
Access
No.
Outside
Phone
No.
Cancel
Follow Me
Follow Me Cancel
Your Extension No.
Do Not Disturb
Both Calls
Outside Calls
Intercom Calls
Set
Cancel
Sending a Call Waiting Tone*1
While hearing a busy tone
Wait for an answer.
30
Document Version 2007-06
Operation
Call Waiting
To set/cancel for intercom calls
No call
Tone
To set/cancel for outside calls
No tone
Tone
To talk to the new party (While hearing the Call Waiting tone)
To terminate a current status
To hold and then talk to the new party
(rapidly flashing F-CO Key [0-9, , #])
OR
(rapidly flashing F-CO Key)
OR
Disregard this step if both parties are extensions.
Paging
To page
Paging Group No. (2 digits)
(Announce)
Wait for an answer.
To answer
Document Version 2007-06
31
Operation
Absent Message
To set
*2
Will Return Soon
Gone Home
At Ext %%%% + Extension no.
Back at %%:%% + Hour:Minute
Out until %%/%% + Month/Day
In a Meeting
Enter required no.
To cancel
Log-in/Log-out
For Log-in
Specified
ICD Group* Extension No.
For Log-out
All
* ICD Group: Incoming Call Distribution Group
Extension Feature Clear
Message Waiting
Caller
To leave a message waiting indication
When the called extension is busy or does not answer
OR
To cancel a message waiting indication
Desired Extension No.
32
Document Version 2007-06
Operation
Message Waiting
Called extension
To call back
OR
Extension Dial Lock*3
To lock
To unlock
Extension PIN* (max. 10 digits)
* PIN: Personal Identification Number
*1 You cannot send a call waiting tone when
– the called party has not set the Call Waiting feature.
– the called party has set the Data Line Security feature.
*2 Enter the desired value in the “%” positions. You must enter the correct number of characters as
represented by the “%” using 0 to 9 or .
To change the default messages and create your personal messages (Message no. 9), refer to
the documentation for your PBX.
*3 If you do not set an extension PIN, you cannot lock and unlock your extension.
•
For more information, refer to the user documentation for your PBX.
Document Version 2007-06
33
Operation
Making Use of the Voice Mail Service
Making Use of the Voice Mail Service
Listening to a Message
From your own extension
KX-TVA series
Listen to Message
Deliver Message
Mailbox Management
Automated Attendant
Message Notification
Other Features
End Call
VPS* Extension No.
Mailbox Password*1 +
· If you have no password, you can skip the last step.
* VPS: Voice Processing System
From someone else’s extension
KX-TVS series
Listen to Message
Deliver Message
Check Mailbox Distribution
Automated Attendant
Mailbox Management
Other Features
End Call
VPS Extension No.
Mailbox No.
Mailbox Password*1 +
· If you have no password, you can skip the last step.
Leaving a Message
From your own extension
Mailbox Password*1 +
VPS Extension No.
From someone else’s extension
Mailbox No.
Mailbox Password*1 +
· If you have no password, you can skip the last step.
Enter the desired mailbox no.
Leave a message
To send the message immediately
(KX-TVA series)
(KX-TVS series)
To set the delivery time
Follow the guidance
During Playback
Repeat Voice Guidance
Exit Menu
*1 For more information on the Mailbox Password, refer to the user documentation for the VPS.
•
34
Some feature access numbers may vary depending on the market. Please consult
your local dealer for the details.
Document Version 2007-06
Using the Handset Phonebook
Handset Phonebook
Handset Phonebook
You can store up to 100 items with names, phone numbers, and category numbers in the
handset for easy access. You can set unique Ringer/LED/Vibrate patterns for each
category to identify incoming calls. All Phonebook items are stored in alphabetical order.
For security purposes, you can lock the Phonebook. To make a call using the Phonebook,
see page 21.
Private Ring
Private Ring
You can organize entries in the Phonebook into one of 9 Private Ring Categories. It is
possible to set a different ringer/LED/vibrate pattern*1 for each category. When the
displayed Caller ID*2 matches a phone number or name stored in the Phonebook, the
handset rings according to the Private Ring Category settings.
*1 For Ringer/LED/Vibrate patterns, see page 49.
*2 For Caller ID information, see “Caller ID” on page 28.
Storing an Item in the Handset Phonebook
Storing an Item in the Handset Phonebook
Storing a New Item
Storing a New Item
Enter name.
(max. 16 characters)
Press the Joystick.
Select “
New
Phonebook”.
Press the Joystick.
OR
Enter phone number.
(max. 32 digits)
Press the Joystick.
Move the Joystick
UP or DOWN.
Select the desired category number (1-9)
or Off.
Press the
Joystick.
Press the Joystick.
Press the Joystick for
“Save”.
•
To enter characters, see page 42.
•
The valid digits are “0” through “9”, “ ”, “#”, “P (
•
When storing an outside phone number, you should first store a line access number.
Document Version 2007-06
)”.
35
Using the Handset Phonebook
Editing a Stored Item
Editing a Stored Item
OR
Enter
name.*1
Press the Left
Soft Key.
Select the desired
item. (if required)
Press the Joystick.
Press the Joystick.
Move the
Joystick UP
or DOWN.
Select “Edit”.
Press the Joystick.
OR
Edit name.
(max. 16 characters)
Press the Joystick.
Move the
Joystick UP
or DOWN.
Edit phone number.
(max. 32 digits)
Press the Joystick.
Select the desired category number (1-9)
or Off.
Press the Joystick. Press the Joystick for “Save”.
*1 This step can be omitted.
•
•
To enter characters, see page 42.
To search for an item in the Phonebook, see page 24.
•
The valid digits are “0” through “9”, “ ”, “#”, “P (
•
•
To change a character or digit, move the Joystick
to highlight it, press
it, then enter the new character or digit.
To clear an entire line, press
for more than 1 second.
•
To move the cursor to the left or right, move the Joystick
36
)”.
or
to delete
, respectively.
Document Version 2007-06
Using the Handset Phonebook
Storing an Item Using the Predialing
Storing an Item Using the Predialing
Enter phone number.
(max. 32 digits)
Enter name.
(max. 16 characters)
Press the Joystick.
OR
Press the Joystick.
Edit phone
number.
OR
(max. 32 digits)
Move the Joystick UP or
DOWN.
Select the desired category number
(1-9) or Off.
Press the Joystick.
Press the Joystick.
Press the Joystick for
“Save”.
Storing an Item Using the Outgoing Call Log
Storing an Item Using the Outgoing Call Log
Press the Right Soft
Key.
Select the desired
item.
Press the Joystick.
Select “Save
Phonebook”.
Enter a name, phone number, and select
the category number (1-9) or Off.*1
Press the Joystick.
*1 Press
•
Press the Joystick
for “Save”.
to confirm each entry. (name: max. 16 characters/phone number: 32 digits)
When storing an outside phone number, the line access number will be stored
automatically. The line access number must be identical to the handset’s “Line
Access CD” setting (Other Option). (See page 54.)
Document Version 2007-06
37
Using the Handset Phonebook
Storing an Item Using the Incoming Call Log
Storing an Item Using the Incoming Call Log
Press the Right
Soft Key.
Press the Right
Soft Key.
OR
Select the desired
item.
Press the Joystick.
Move the Joystick UP or DOWN.
Enter a name, phone number, and select
the category number (1-9) or Off.*1
Select “Save
Phonebook”.
Press the Joystick.
Press the Joystick for “Save”.
*1 Press
•
38
to confirm each entry. (name: max. 16 characters/phone number: 32 digits)
When storing an outside phone number, the line access number will be stored
automatically. The line access number must be identical to the handset’s “Line
Access CD” setting (Other Option). (See page 54.)
Document Version 2007-06
Using the Handset Phonebook
Storing an Item Using the PBX System Phonebook
Storing an Item Using the PBX System Phonebook
OR
Enter
Press the Left
Soft Key.
Press the Left
Soft Key.
Select the
desired item.
(if required)
Press the Joystick.
name.*1
Press the
Joystick.
Select “Save
Phonebook”.
Move the
Joystick UP
or DOWN.
Press the Joystick.
Enter a name, phone number, and select the
category number (1-9) or Off.*2
Press the Joystick for “Save”.
*1 This step can be omitted.
*2 Press
•
to confirm each entry. (name: max. 16 characters/phone number: 32 digits)
To search for an item in the Phonebook, see page 24.
Storing an Item Using the PBX Extension Phonebook
Storing an Item Using the PBX Extension Phonebook
Enter name.*1
Press the Left
Soft Key.
Press the Left
Soft Key.
Press the Left
Soft Key.
OR
Press the Joystick.
Move the Joystick UP or
DOWN.
Select the
desired item.
(if required)
Press the Joystick.
Enter a name, phone number,
and select the category number (1-9) or Off.*2
Select “Save
Phonebook”.
Press the Joystick.
Press the Joystick for “Save”.
*1 This step can be omitted.
Document Version 2007-06
39
Using the Handset Phonebook
*2 Press
•
to confirm each entry. (name: max. 16 characters/phone number: 32 digits)
To search for an item in the Phonebook, see page 24.
Editing Category Names
Editing Category Names
You can edit the names of the categories in the Handset Phonebook.
Press the Joystick.
Select “
Setting Handset”.
Press the Joystick.
Select “DisPress the Joyplay Option”. stick.
Select “Category Name”.
Press the Joystick.
Select the desired category number (1-9).
Press the Joystick.
Enter name.
(max. 15 characters)
Press the Joystick.
40
Document Version 2007-06
Using the Handset Phonebook
Assigning Hot Keys
Assigning Hot Keys
You can assign a phone number stored in the Handset Phonebook to a key to be used as
a Hot Key.
OR
*1
Enter name.
Press the Left
Soft Key.
Press the Joystick.
Move the Joystick UP or
DOWN.
Press the Joystick.
Select “Regist.
Hot Key”.
Press the Joystick.
Select a blank hot Press the Joykey number (0-9). stick.
Press the Joystick for “Save”.
Select the desired
item. (if required)
*1 This step can be omitted.
•
•
To search for an item in the Phonebook, see page 24.
A “ ” will be displayed next to hot key numbers that have a Phonebook item
registered to them.
Document Version 2007-06
41
Using the Handset Phonebook
Entering Characters
Entering Characters
You can enter characters and digits using the dialing keys.
You can select one of 3 character modes by pressing the Right Soft Key
while entering a name. The function icon above the soft key displays the
current character mode.
See “Character Mode Table” (page 43) for available characters.
A, a
B, b
C, c
To change the character mode while editing a name in the Phonebook, press the Right Soft Key.
Alphabet
Numeric
Extended
Example: To enter “Anne” in Alphabet Mode.
•
•
To switch between uppercase and lowercase, press
To enter a character located on the same dialing key as the previous character, move
the cursor by moving the Joystick
, then enter the desired character.
•
•
If you enter a different character by mistake, move the Joystick
character, press
to delete it, then enter the correct character.
To clear an entire line, press
for more than 1 second.
•
To move the cursor, move the Joystick
42
to highlight the
Document Version 2007-06
Using the Handset Phonebook
Character Mode Table
Character Mode Table
Keys
ABC (Alphabet)
0-9 (Numeric)
+ÀÂ (Extended)
•
•
Press
before or after entering a character to change between uppercase and
lowercase.
Pressing a key repeatedly will cycle through the characters associated with that key.
For example, to enter the letter “C”, press
three times.
Document Version 2007-06
43
Using the Handset Phonebook
Locking the Handset Phonebook
Locking the Handset Phonebook
You can lock/unlock the Phonebook while the handset is in standby mode.
Locking the Handset Phonebook
Locking the Handset Phonebook
Press the Left Soft Key for more
than 2 seconds.
Locked.
Unlocking the Handset Phonebook
Unlocking the Handset Phonebook
Enter your password*1.
(default: 1234)
You can view the Phonebook
and use it to make calls.
Press the Left Soft Key for
more than 2 seconds.
Press CANCEL.
Unlocked.
Unlocking the Handset Phonebook Temporarily
Unlocking the Handset Phonebook Temporarily
Enter your password*1.
(default: 1234)
You can view the Phonebook
and use it to make calls.
Press the Left Soft Key for
less than 2 seconds.
Press CANCEL.
Still locked.
*1 To change the password, see page 54.
44
Document Version 2007-06
Deleting Stored Items
Deleting Stored Items in Handset Phonebook/Hot Key
Dial/Outgoing Call Log/Incoming Call Log
Deleting Stored Items in Handset Phonebook/Hot Key Dial/Outgoing Call Log/Incoming Call Log
Handset Phonebook
Handset Phonebook
Enter name.*1
Press the Left
Soft Key.
OR
Press the Joystick.
Select the desired
item. (if required)
Press the Joystick. Select “Delete”.*2
Select “Yes”.
Press the Joystick.
Move the Joystick UP or
DOWN.
Press the Joystick.
*1 This step can be omitted.
*2 Select “Delete All” if you want to delete all items.
•
To search for an item in the Phonebook, see page 24.
Hot Key Dial
Hot Key Dial
Press the dialing key
for more than 1 second.
Press the Joystick.
Select the desired item. Press the Joystick.
Select “Yes”.
Select “Delete”.*1
Press the Joystick.
*1
Select “Delete All” if you want to delete all items.
•
If you delete a Phonebook item that you also assigned to a Hot Key, the Hot Key Dial is
also deleted. (See page 41.)
Document Version 2007-06
45
Deleting Stored Items
Outgoing Call Log
Outgoing Call Log
Press the Right Soft
Key.
Press the Joystick.
Select the desired item. Press the Joystick.
Select “Yes”.
Select “Delete”.
Press the Joystick.
Incoming Call Log
Incoming Call Log
46
Press the Right Soft
Key.
Press the Right Soft
Key.
Select “Delete”.
Press the Joystick.
Select the desired
item.
Press the Joystick.
Select “Yes”.
Press the Joystick.
Document Version 2007-06
Configuring Handset Settings
Changing the Initial Settings
Changing the Initial Settings
You can customize the handset by editing the settings found under “Setting Handset”
in the menu list, as follows:
Press the Joystick.
Select “
Setting Handset”.
Press the Joystick.
Select the desired Press the Joymain item.
stick.
Follow the setting.
Select the
Press the Joystick.
desired sub item.
Press the Joystick.
•
To return to the previous menu, press
•
•
To cancel, press
at any time.
The handset will beep to indicate that the new settings have been saved.
Document Version 2007-06
47
Configuring Handset Settings
Handset Setting Menu Layout
Handset Setting Menu Layout
Setting Handset
48
[Main Item]
[Sub Item]
Incoming Option
Ringer Volume
Ringer Type
Vibrate
Ring On Charger
Memo Alarm
Headset Tone
Talk Option
Speaker Volume
Receiver Volume
Headset Volume
Headset Mic Vol
Talk On Charger
Answer Option
Any Key Answer
Quick Answer
Auto Answer
Auto Ans Delay
Key Option
F-CO Key Name
Function Key
Display Option
Language
Backlight
LCD Contrast
Standby Display
Category Name
Guidance
Date&Time Form
Caller ID Disp
Tone Option
Key Tone
Range Alarm
System Option
Register H/S
Cancel Base
Select Base
System Lock
Change PIN
Other Option
Change Password
Line Access CD
Reset Handset
Document Version 2007-06
Configuring Handset Settings
Incoming Option
Sub Item
Ringer Volume
Description
Adjusts the ringer volume.
Setting
Default
Step Up
Step Down
Level 1-6
Level 3
Off
Ringer Type
– Intercom Ring
– CO Ring
– Group Ring
Ringer Pattern
Selects the ringer pattern for
each type of call.
Bell 1-6
LED Pattern
Selects the LED pattern for each
type of call.
Red
– Private Ring
(Category 1-9)
Melody 1-9
Green
Orange
R→G→O
Vib. Pattern
Selects the vibrate pattern for
each type of call.
Bell 1
CO Ring:
Red
Intercom Ring/
Private Ring:
Green
Group Ring:
Orange
Single
Double
Triple
Short Double
Single
Short Triple
Short Term
Continuous
Vibrate
Selects whether the handset
vibrates while receiving a call.
Vib.& Ring
Vib.→ Ring
Off
Off
Ring On Charger
Selects the ringing mode (On or
Off) while a handset is set on the
charger.*1
Document Version 2007-06
On
Off
On
49
Configuring Handset Settings
Sub Item
Memo Alarm
Description
Setting
Ringer Pattern
Selects the ringer pattern for
each Memo Alarm.
Bell 1-6
LED Pattern
Selects the LED pattern for each
Memo Alarm.
Red
Default
Bell 1
Melody 1-9
Green
Green
Orange
R→G→O
Vib. Pattern
Selects the vibrate pattern for
each Memo Alarm.
Single
Double
Triple
Short Double
Single
Short Triple
Short Term
Continuous
Headset Tone
Selects whether a tone is heard
from the attached headset while
receiving a call.
On
Off
Off
*1 When “Ring On Charger” is set to on but “Ringer Volume” is set to off, the handset rings at
level 1.
Talk Option
Sub Item
Description
Setting
Default
Speaker Volume
Adjusts the rear speaker volume. Level 1-6
Level 3
Receiver Volume
Adjusts the receiver volume.
Level 1-4
Level 2
Headset Volume
Adjusts the headset speaker vol- Level 1-4
ume.
Level 2
Headset Mic Vol
Adjusts the headset microphone
volume.
Level 1-4
Level 1
Talk On Charger
Selects whether or not to continue the conversation when the
handset is put on the charger
during a conversation.
On
50
Off
Off
Document Version 2007-06
Configuring Handset Settings
Answer Option
Sub Item
Any Key Answer
Description
Answers a call by pressing any
dialing key.
Setting
Default
On
Off
Off
Quick Answer
Auto Answer
Auto Ans Delay
Answers a call while charging by
just lifting up a handset from the
charger.
On
Selects the types of calls that can
be answered by AUTO
ANSWER.
Int Only
Selects the number of seconds
before a call is automatically
answered when Auto Answer is
turned on.
Off
Off
Int & CO
Int Only
0 s-20 s
6s
Key Option
Sub Item
Description
F-CO Key Name
Edits the names of the flexible
CO keys.
Function Key
Edits Function Key list.
Setting
Default
Max. 12 characters x
12 flexible CO keys x
4 bases
Not stored
Redial
1: Redial
Fwd/DND
2: Fwd/DND
Flash/Recall
3: Flash/Recall
Auto Answer
4: Auto Answer
Conference
5: Conference
Pause
6: Pause
Auto Dial
7: Auto Dial
PBX Program
8: None
None
*1
9: None
0: PBX Program
*1 Used to cancel the settings.
Document Version 2007-06
51
Configuring Handset Settings
Display Option
Sub Item
Language
Description
Selects the display language.
Setting
Default
Auto
English
Auto
Español
FRANÇAIS
Backlight
Turns on the backlight of the LCD
and keypad.
On
On & Receiving
On
Off
LCD Contrast
Adjusts the LCD contrast.
Standby Display
Selects the display in standby
mode.
Level 1-5
Level 3
H/S No.
Base & H/S No.
H/S No.
Edit
Edits the name displayed on the
LCD while in standby mode.
Max. 16 characters/4
digits
Not stored
Category Name
Edits the names of the categories.
Max. 15 characters x
Category (1-9)
Not stored
Guidance
Selects whether the guidance
display is shown or not in standby
mode.
On
Selects the format for the date
shown on the display in standby
mode.
DD-MM 12H
Date&Time Form
On
Off
DD-MM 24H
MM-DD 12H
MM-DD 24H
MM-DD 12H
DD-MM-YY
MM-DD-YY
Caller ID Disp
52
Selects which caller information
is displayed when a call is
received.
Either the information stored in
the Handset Phonebook or the
PBX can be displayed.
H/S Phonebook
PBX Setting
PBX Setting
Document Version 2007-06
Configuring Handset Settings
Tone Option
Sub Item
Description
Turns the key tone on or off.
Key Tone
Setting
On
On
Off
Selects whether the range alarm
tone rings or not.
Range Alarm
Default
On
On
Off
System Option
Sub Item
Register H/S
Cancel Base
*1
Select Base*1
Description
Registers a handset to a base.
Cancels the registration of a
handset.
Selects a base.
Setting
Base 1-4
Base 1-4
Not stored
*2
Auto
Base 1-4
System Lock
Selects whether to lock the System Option set or not.
On*3
Off
Change PIN
Default
Before registering your handset Enter the PIN numwith a PBX, enter the PBX’s PIN ber. (max. 8 digits)
here. Once you have registered
the handset with a PBX, this PIN
can be changed so that the handset can be registered to an additional PBX.
Auto
Off
1234
*1 Only registered base is shown.
*2 You can select multiple bases simultaneously.
*3 Password is required. (4 digits)
Document Version 2007-06
53
Configuring Handset Settings
Other Option
Sub Item
Change Password
Description
Changes the handset password
(4 digits) used for unlocking the
Handset Phonebook and using
the “Reset Handset” option.
Setting
Default
Enter Old Password.
↓
Enter New Password.
1234
↓
Verify New Password.
Line Access CD
Enters the line access code that Select a number, then No.1: 9
matches the setting of your PBX. enter the code. (max. No.2: 8XX*1
Three access line codes can be 6 digits)
No.3: Not Stored
stored.
Reset Handset
Returns the handset settings to
its default settings.
Enter Password.
(4 digits)
↓
Select the desired
item(s).
Not stored
↓
Press “OK”.
*1 XX is identical to the CO line group number, and 8XX represents any 3-digit code starting with “8”.
54
Document Version 2007-06
Configuring Handset Settings
Memo Alarm Setting
Memo Alarm Setting
An alarm will sound at the set time. A memo can also be displayed. Memo Alarm is
available only when handset is within range of a CS.
To set
Press the Joystick.
Select “
Memo Alarm”.
Press the Joystick.
Select the alarm
number. (1-3)
Press the Joystick.
Press the Joystick.
Press the Joystick
for “Save”.
[Select the Alarm mode—Once/Daily]
[Once]
Enter date and
time.*1
[Daily]
Enter the time.
Enter memo.
Press the Joystick.
[Select the Alarm mode—Weekly]*2
Enter time.
Select the desired Press the Right Press the Joyday of the week. Soft Key.
stick.
Press the Joystick.
Enter memo.
Press the Joystick.
Press the Joystick for “Save”.
[Select the Alarm mode—Off]
Press the Joystick.
Press the Joystick
for “Save”.
*1 You can select the format for the date and time. (See page 52.)
*2 A “
•
•
” will be displayed next to a day of the week that have been set.
You can select the ringer/LED/vibrate pattern for each Memo Alarm. (See page 50.)
If you are on a call at the time that the alarm is set to sound, it will sound after you have
ended the call.
Document Version 2007-06
55
Configuring Handset Settings
To delete the alarm mode setting
Press the Joystick.
Select “
Memo Alarm”.
Press the Joystick.
Select “Yes”.
Press the Joystick.
Select the alarm
number. (1-3)
Press the Right
Soft Key.
To stop the alarm
Press all keys other than soft keys.
56
Document Version 2007-06
Troubleshooting and Error Messages
Troubleshooting
Troubleshooting
Problem
The handset does not
work.
Possible Cause
Solution
The battery is drained.
Charge the battery fully.
(See “Charging the Battery” on
page 5.)
The power is OFF.
•
•
Turn it ON.
(See “Location of Controls” on
page 7.)
Re-insert the battery and try
again. (See “Battery Installation” on page 5.)
The handset does not
ring.
Ringer volume is set to “Off”.
Adjust the ringer volume level.
(See “Adjusting the Ringer Volume”
on page 12.)
You cannot make/
receive a call.
The handset is out of range, or
the CS is busy.
Move closer to the CS or try again
later.
The radio channel is busy, or a
radio communication error
occurred.
Try again later.
The number that you dialed is
restricted by the PBX.
Consult your dealer.
Key lock mode is ON.
To cancel the mode, press the Joystick for about 2 seconds.
(See “Key Lock” on page 8.)
The radio channel is busy or a
radio communication error
occurred.
Try again later.
You cannot dial.
The handset stops
working during operation.
•
•
You cannot use the
handset during a
power failure.
The handset will not function during a power failure because the
PBX stops emitting radiowaves.
The headset does not
work.
A headset tone cannot be heard
when receiving an incoming call
when the headset is attached.
The tone from the
headset cannot be
changed to a bell or
melody.
•
•
Turn the handset off, then turn it
back on.
(See “Location of Controls” on
page 7.)
Re-insert the battery and try
again.
(See “Battery Installation” on
page 5.)
Make sure the headset tone setting is set to on. (See “Incoming
Option” on page 49.)
Make sure the headset jack is
connected properly. (See “Location of Controls” on page 7.)
The headset tone is a specific
tone and is not related to the
Incoming Option settings (Ringer
Type).
Noise is frequently
heard.
Document Version 2007-06
•
•
Set the handset and CS away
from other electrical appliances.
Move closer to the CS.
57
Troubleshooting and Error Messages
Problem
Possible Cause
Solution
Two short beeps are
The radio signal is weak.
heard during a conversation.
Move closer to the CS.
The charge indicator
flashes red rapidly.
•
The charger is not connected
properly.
You charged the bat- The battery charge contacts may
tery for 7 hours, but
be dirty.
the beep tones sound,
and
(needs to be
charged) flashes after It is time to change the battery.
a few telephone calls.
•
Make sure the battery is inserted
properly.
Set the handset in the charger
properly.
Clean the battery charge contacts
without damaging them and charge
once more.
Replace with a new one.
While operating the
These are normal conditions.
handset, the AC adaptor feels warm. While
charging the battery,
the handset feels
warm.
58
Document Version 2007-06
Troubleshooting and Error Messages
Error Messages
Error Messages
Error Message
Possible Cause
Solution
Register Unit
The handset has been canceled
or the handset has not been registered.
Consult your dealer.
No Service
The handset is out of range.
Move closer to the CS.
The CS is turned off.
Make sure the power cord is connected.
PS Not Connected
The called handset is out of range Try again later.
or is not turned on.
CS Busy
The CS is busy.
Try again later.
Please Wait...
The handset is connecting to the
CS or PBX.
Wait for a moment.
Charge Battery
The handset battery has little
charge remaining.
Charge the battery fully. (See
“Charging the Battery” on page 5.)
No Entries
When trying to view the Phonebook: No items have been stored.
(See “Storing an Item in the Handset Phonebook” on page 35.)
When trying to view the Incoming
or Outgoing Call Log: No logs
have been stored.
Memory Full
The Phonebook is full and cannot Remove unnecessary data in the
store the new item.
Phonebook and try again.
Incorrect Entry
The numbers you entered are
invalid.
Need Repair 1(-2)
Document Version 2007-06
Recheck your entry (max. 5 digits)
and try again.
Consult your dealer.
59
Important Information
Battery Information
Battery Information
After your Panasonic battery is fully charged (at 25 °C [77 °F]):
Operation
•
•
•
•
Operating Time
While in use (Talk)
Up to about 10 h
While not in use (Standby)
Up to about 168 h
Operating time may be shorter than listed above depending on usage conditions and
ambient temperature.
The battery will drain slowly even while the handset is turned off.
The handset can receive calls while charging.
Battery consumption increases when the handset is used out of range. If “
power off the handset.
” flashes,
Low Battery Warning
The battery needs to be charged in the following situations:
•
•
“
” flashes, and the alarm sounds*1.
“Charge Battery” is displayed. In this situation, the handset cannot be operated.
*1 If the low battery warning occurs during a conversation, the call will be automatically disconnected
one minute after the alarm sounds.
Replacing the Battery
If “
” flashes after using the phone for a short time, even when the battery has been fully
charged, the battery should be replaced.
Before replacing the battery, make sure the low battery warning is displayed, then turn off
the power to prevent memory loss. Replace the battery and charge the new battery for
about 7 hours.
If you replace the battery before the low battery warnings appears, the battery strength
icon may display an incorrect reading. In this case, use the handset as normal with the
new battery installed. When the low battery warning is displayed, charge the battery for
about 7 hours. The battery strength icon will then display the correct reading.
1. Turn the power off to prevent memory loss.
2. Press the notch on the cover firmly and slide it as indicated by the
arrow.
3. Open the cover and replace the battery.
4. Close the cover and charge the handset.
•
Please use a Panasonic battery with the service part number N4HHGMB00005 or
HHR-P103.
This product is powered by a recyclable nickel-metal hydride battery.
Please call 1-800-8-BATTERY for information on how to recycle this battery.
There is a danger of explosion if the battery is incorrectly replaced.
60
Document Version 2007-06
Important Information
Important Safety Instructions
Important Safety Instructions
When using your telephone equipment, basic safety precautions, including those below,
should always be followed to reduce the risk of fire, electric shock and injury to persons.
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on this product.
3. Unplug the charger from the AC outlet before cleaning. Do not use liquid or aerosol
cleaners. Clean with a damp cloth.
4. Do not use the product near water, for example, near a bathtub, kitchen sink, or
laundry tub, in a wet basement, or near a swimming pool.
5. Place the charger on a stable surface.
6. The product should never be placed near or over a radiator or other heat source.
7. The charger should only be connected to the type of electric power supply specified on
the charger label. If you are not sure of the type of power supply to your home, consult
your dealer or local power company.
8. Do not allow anything to rest on the power cord. Do not locate the charger where the
power cord may be stepped on or tripped on.
9. To reduce the risk of fire or electric shock, do not overload AC outlets and extension
cords.
10. Do not insert objects of any kind into this product through openings, as they may touch
dangerous voltage points or short out parts that could result in a risk of fire or electric
shock. Never spill liquid of any kind on the product.
11. To reduce the risk of electric shock, do not disassemble this product. Only qualified
personnel should service this product. Opening or removing covers may expose you to
dangerous voltages or other risks. Incorrect reassembly can cause electric shock.
12. Unplug the charger from the AC outlet and have the product serviced by qualified
service personnel in the following cases:
A. When the power supply cord or plug is damaged or frayed.
B. If liquid has been spilled on the product.
C. If the product has been exposed to rain or water.
D. If the product does not work normally by following this manual. Adjust only controls
covered by this manual. Improper adjustment may require repair by an authorized
service center.
E. If the product has been dropped or damaged.
F. If the product’s performance deteriorates.
13. Avoid using a wired telephone during an electrical storm. There is a remote risk of
electric shock from lightning.
14. Do not use the telephone in the vicinity of a gas leak to report the leak.
15. When you operate this product, the AC outlets should be near the product and easily
accessible.
SAVE THESE INSTRUCTIONS
Document Version 2007-06
61
Important Information
CAUTION
To reduce the risk of fire or injury to persons, read and follow these instructions.
1. Use only the AC adaptor, battery and charger indicated in this manual.
2. Do not dispose of the battery in a fire. They may explode. Check with local authorities
for special disposal instructions.
3. Do not open or disassemble the battery. Released electrolyte is corrosive and may
cause burns or injury to the eyes or skin. The electrolyte is toxic if swallowed.
4. Exercise care in handling batteries in order not to short the battery to conductive
materials such as rings, bracelets, and keys. The battery and/or conductor may
overheat and cause burns.
5. Charge the battery provided with, or identified for use with, this product only in
accordance with the instructions and limitations specified in this manual.
6. There is a danger of explosion if the battery is incorrectly replaced.
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this product.
WARNING
TO PREVENT POSSIBLE FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE.
Unplug the charger from AC outlets if it emits smoke, an abnormal smell or makes unusual
noise. These conditions can cause fire or electric shock. Confirm that smoke has stopped
and contact an authorized service center.
When programming emergency numbers and/or making test calls to emergency numbers:
1. Remain on the line and briefly explain to the dispatcher the reason for the call before
hanging up.
2. Perform such activities during off-peak hours, such as early morning or late evening.
62
Document Version 2007-06
Important Information
FCC Information
FCC Information
Privacy of communications cannot be ensured when using this phone.
Radio Frequency Exposure Requirements
This product complies with FCC radiation exposure limits set forth for an uncontrolled
environment. To comply with FCC RF exposure requirements, it must be installed and
operated in accordance with provided instructions. For handset body-worn operation, this
handset must be used with the provided plastic belt clip, which assures no metal parts and
minimum of 1.5 cm (9/16 in) spacing from the user’s body. This transmitter must not be colocated or operated in conjunction with any other antenna or transmitter.
Note
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment to an outlet on a circuit different from that to which the receiver
is connected.
– Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Using this telephone near 2.4 GHz electrical appliances may cause interference to one or
both devices. Move away from the electrical appliances.
Document Version 2007-06
63
Important Information
Customer Information
Customer Information
This equipment complies with Part 68 of the FCC rules and the requirements adopted by
the ACTA. On the inside of the battery compartment of this equipment is a label that
contains, among other information, a product identifier in the format US: AAAEQ##Txxxx.
If requested, this number must be provided to the telephone company.
If trouble is experienced with this equipment KX-TD7694, for repair or warranty
information, please contact:
Panasonic Service and Technology Company
BTS Center
1225 Northbrook Parkway Suite
1-216 Suwanee
GA 30024
If the equipment is causing harm to the telephone network, the telephone company may
request that you disconnect the equipment until the problem is resolved.
Hearing Aid Compatibility
This telephone provides magnetic coupling for hearing aids as defined by the FCC in 47
CFR Section 68.316. Use only handsets or other acoustic devices with this equipment that
are compliant with the hearing aid compatibility requirements of FCC Part 68.
When you hold the phone to your ear, noise might be heard in your Hearing Aid. Some
Hearing Aids are not adequately shielded from external RF (radio frequency) energy. If
noise occurs, use an optional headset accessory or the speakerphone option (if
applicable) when using this phone. Consult your audiologist or Hearing Aid manufacturer
about the availability of Hearing Aids which provide adequate shielding to RF energy
commonly emitted by digital devices.
64
Document Version 2007-06
Important Information
Other Important Information
Other Important Information
Environment—do not place the product in rooms where the temperature is less than 5 °C
(41 °F) or greater than 40 °C (104 °F). Allow 10 cm (3-15/16 in) clearance around the
product for proper ventilation.
Avoid environments with excessive smoke, dust, mechanical vibration, shock, or direct
sunlight.
Medical—consult the manufacturer of any personal medical devices, such as
pacemakers, to determine if they are adequately shielded from external RF (radio
frequency) energy. (The product operates in the frequency range of 2,401 MHz to 2,480
MHz and emits 0.40 watts of RF [radio frequency] power.) Do not use the product in health
care facilities if any regulations posted in the area instruct you not to do so. Hospitals or
health care facilities may be using devices sensitive to external RF (radio frequency)
energy.
Routine Care—wipe the product with a soft cloth. Do not clean the product with abrasive
powder or with chemical agents such as benzene or thinner. Clean the terminal of the
charger periodically. When you leave the product unused for a long period of time, unplug
the AC adaptor from the outlet.
For Product Service
• Panasonic Service Centers are listed in the service center directory.
• Call 1-800-211-PANA (7262) for the location of your nearest authorized service center.
• Panasonic’s e-mail address for customer inquiries:
consumerproducts@panasonic.com
for customers in the USA or Puerto Rico ONLY
To return a product for repair
Carefully pack and send it prepaid, adequately insured and preferably in the original
carton. Attach a postage-paid letter, detailing the symptom, to the outside of the carton.
DO NOT send the product to the Executive or Regional Sales offices, as they are not
equipped to make repairs.
Product Service
Panasonic Factory Service Centers for this product are listed in the service center
directory. Consult your certified Panasonic dealer for detailed instructions.
Document Version 2007-06
65
Important Information
For Best Performance
Operating Range
1. The range of operation depends on the topography of your office, weather, or usage
conditions, because signals are transmitted between the CS and the handset by radio
waves.
2. Normally, you get greater range outdoors than indoors. If there are obstacles such as
walls, noise may interfere with your telephone calls. In particular, high metal shelves or
reinforced concrete walls will restrict your operating range.
3. A handset may not work when it is too far from the CS depending on the structure of
the building.
Noise
Occasional noise or interference may occur due to electromagnetic radiation from objects
such as refrigerators, microwave ovens, faxes, TVs, radios, or personal computers. If
noise disturbs your telephone calls, keep the handset away from these electrical
appliances.
We strongly suggest you hold the bottom half of the handset to ensure better call quality.
Because, the antenna is located in the upper half of the handset.
System Requirements
PBX
Model No.
Main Processing (MPR) Software Version
KX-TDA50
KX-TAW848
PSMPR Software File Version 3.0005 or later
KX-TDA100
KX-TDA200
PMPR Software File Version 3.0002 or later
KX-TDA600
PLMPR Software File Version 3.1006 or later
KX-TDE100
KX-TDE200
PMMPR Software File Version 1.0000 or later
66
CS
KX-T0151
KX-TDA0152
KX-T0141
KX-TDA0142
Document Version 2007-06
Important Information
Document Version 2007-06
67
For your future reference
SERIAL NO.
(found inside the battery compartment)
DATE OF PURCHASE
NAME OF DEALER
DEALER’S ADDRESS
DEALER’S TEL. NO.
Panasonic Consumer Electronics Company,
Division of Panasonic Corporation of North America
One Panasonic Way, Secaucus, New Jersey 07094
Panasonic Puerto Rico, Inc.
San Gabriel Industrial Park, Ave. 65 de Infantería, Km. 9.5,
Carolina, Puerto Rico 00985
http://www.panasonic.com/csd
Copyright:
This material is copyrighted by Panasonic Communications Co., Ltd., and may be
reproduced for internal use only. All other reproduction, in whole or in part, is prohibited
without the written consent of Panasonic Communications Co., Ltd.
© 2007 Panasonic Communications Co., Ltd. All Rights Reserved.
PSQX4318ZA KK0607SY0

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2007:05:23 14:39:44+09:00
Create Date                     : 2007:05:23 14:09:33Z
Page Count                      : 68
Creation Date                   : 2007:05:23 14:09:33Z
Mod Date                        : 2007:05:23 14:39:44+09:00
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : Saito
Metadata Date                   : 2007:05:23 14:39:44+09:00
Creator                         : Saito
Title                           : PSQX4318ZA_TD7694_OI.book
Page Mode                       : UseOutlines

EXIF Metadata provided by EXIF.tools