Panasonic of North America 96NKX-TG1061 Part 15 Unlicensed PCS Base Station User Manual TG106x 1028 shinsei 1

Download:
Mirror Download [FCC.gov]
Document ID	1048183
Application ID	MBtSxHi/wduovo7vJV78ig==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	157.81kB (1972663 bits)
Date Submitted	2008-12-22 00:00:00
Date Available	2009-02-05 00:00:00
Creation Date	2008-10-30 11:28:04
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2008-12-01 13:19:48
Document Title	TG106x_1028_shinsei[1].pdf
Document Creator	PScript5.dll Version 5.2
Document Author:	5098687

Temporary Confidential
TG106x.book Page 1 Tuesday, October 28, 2008 3:25 PM
Operating Instructions
Expandable Digital Corded/Cordless
Answering System
Model No.
KX-TG1061
with 2 Handsets
Model No.
KX-TG1062
with 3 Handsets
Model No.
KX-TG1063
This unit is compatible with Caller ID. You must subscribe to the appropriate
service offered by your service provider/telephone company.
Charge the handset batteries for about 7 hours before initial use.
Please read these operating instructions before using the unit and save
them for future reference.
Temporary Confidential
TG106x.book Page 2 Tuesday, October 28, 2008 3:25 PM
For your safety
To prevent severe injury and loss of life/
property, read this section carefully
before using the product to ensure
proper and safe operation of your
product.
WARNING
Power connection
L Use only the power source marked on
the product.
L Do not overload power outlets and
extension cords. This can result in the
risk of fire or electric shock.
L Completely insert the AC
adaptor/power plug into the power
outlet. Failure to do so may cause
electric shock and/or excessive heat
resulting in a fire.
L Regularly remove any dust, etc. from
the AC adaptor/power plug by pulling
it from the power outlet, then wiping
with a dry cloth. Accumulated dust
may cause an insulation defect from
moisture, etc. resulting in a fire.
L Unplug the product from power outlets
if it emits smoke, an abnormal smell,
or makes an unusual noise. These
conditions can cause fire or electric
shock. Confirm that smoke has
stopped emitting and contact the
Panasonic Call Center at 1-800-211PANA (1-800-211-7262).
L Unplug from power outlets and never
touch the inside of the product if its
casing has been broken open.
L Never touch the plug with wet hands.
Danger of electric shock exists.
Installation
Toprevent
prevent the
LLTo
the risk
riskofoffire
fireororelectrical
electrical
shock, do
do not
to to
shock,
not expose
exposethe
theproduct
product
rain or any type of moisture.
rain or any type of moisture.
L Do not place or use this product near
L Do
not place or
use thisdevices
product
near
automatically
controlled
such
automatically
controlled
devices
as automatic doors
and fire
alarms.such
as
automatic
doors and
Radio
waves emitted
fromfire
thisalarms.
product
may cause
such
devices
tothis
malfunction
Radio
waves
emitted
from
product
resulting
in an such
accident.
may cause
devices to
Lmalfunction
Do not allow resulting
the AC adaptor
or telephone
in an accident.
be excessively pulled, bent or
Lline
Docord
not to
allow
the AC adaptor or
placed under heavy objects.
telephone line cord to be excessively
L Do not excessively pull the corded
pulled,cord
bentfrom
or placed
under
handset
the base
unit. heavy
This may
objects.
cause
the base unit to fall, resulting in injury.
Operating safeguards
L Unplug the product from power outlets
before cleaning. Do not use liquid or
aerosol cleaners.
L Do not disassemble the product.
L Do not spill liquids (detergents,
cleansers, etc.) onto the telephone
line cord plug, or allow it to become
wet at all. This may cause a fire. If the
telephone line cord plug becomes
wet, immediately pull it from the
telephone wall jack, and do not use.
Medical
L Consult the manufacturer of any
personal medical devices, such as
pacemakers or hearing aids, to
determine if they are adequately
shielded from external RF (radio
frequency) energy. (The product
operates in the frequency range of
1.92 GHz to 1.93 GHz, and the RF
transmission power is 115 mW
(max.).)
L Do not use the product in health care
facilities if any regulations posted in
the area instruct you not to do so.
Hospitals or health care facilities may
be using equipment that could be
sensitive to external RF energy.
Temporary Confidential
TG106x.book Page 3 Tuesday, October 28, 2008 3:25 PM
CAUTION
Installation and relocation
L Never install telephone wiring during
an electrical storm.
L Never install telephone line jacks in
wet locations unless the jack is
specifically designed for wet
locations.
L Never touch uninsulated telephone
wires or terminals unless the
telephone line has been disconnected
at the network interface.
L Use caution when installing or
modifying telephone lines.
L The AC adaptor is used as the main
disconnect device. Ensure that the AC
outlet is installed near the product and
is easily accessible.
L The cordless handset is unable to
make calls when:
– the handset batteries need
recharging or have failed.
– there is a power failure.
L Charge the batteries provided with or
identified for use with this product
only, in accordance with the
instructions and limitations specified
in this manual.
L Only use a compatible charger to
charge the batteries. Do not tamper
with the charger. Failure to follow
these instructions may cause the
batteries to swell or explede.
Attention:
A nickel metal hydride battery that is
recyclable powers the product you have
purchased.
Please call 1-800-8-BATTERY (1-800822-8837) for information on how to
recycle this battery.
Battery
L We recommend using the batteries
noted on page 5. USE ONLY
rechargeable Ni-MH batteries AAA
(R03) size.
L Do not mix old and new batteries.
L Do not open or mutilate the batteries.
Released electrolyte from the
batteries is corrosive and may cause
burns or injury to the eyes or skin. The
electrolyte may be toxic if swallowed.
L Exercise care when handling the
batteries. Do not allow conductive
materials such as rings, bracelets or
keys to touch the batteries, otherwise
a short circuit may cause the batteries
and/or the conductive material to
overheat and cause burns.
Important safety
instructions
When using your product, basic safety
precautions should always be followed
to reduce the risk of fire, electric shock
and injury to persons, including the
following:
1. Do not use this product near water for
example, near a bathtub, washbowl,
kitchen sink or laundry tub, in a wet
basement or near a swimming pool.
2. Avoid using a telephone (other than a
cordless type) during an electrical
storm. There may be a remote risk of
electric shock from lightning.
Temporary Confidential
TG106x.book Page 4 Tuesday, October 28, 2008 3:25 PM
3. Do not use the telephone to report a
gas leak in the vicinity of the leak.
4. Use only the power cord and
batteries indicated in this manual. Do
not dispose of batteries in a fire. They
may explode. Check with local codes
for possible special disposal
instructions.
SAVE THESE INSTRUCTIONS
For best performance
Base unit location/avoiding noise
The base unit and other compatible
Panasonic units use radio waves to
communicate with each other.
L For maximum coverage and noisefree communications, place your base
unit:
– at a convenient, high, and central
location with no obstructions
between the cordless handset and
base unit in an indoor environment.
– away from electronic appliances
such as TVs, radios, personal
computers, wireless devices or
other phones.
– avoid facing radio frequency
transmitters, such as external
antennas of mobile phone cell
stations (avoid putting the base unit
on a bay window or near a window).
L Coverage and voice quality depends
on the local environmental conditions.
L If the reception for a base unit location
is not satisfactory, move the base unit
to another location for better
reception.
Environment
L Keep the product away from electrical
noise generating devices, such as
fluorescent lamps and motors.
L The product should be kept free from
excessive smoke, dust, high
temperature, and vibration.
L The product should not be exposed to
direct sunlight.
L Do not place heavy objects on top of
the product.
L When you leave the product unused
for a long period of time, unplug the
product from the power outlet.
L The product should be kept away from
heat sources such as heaters, kitchen
stoves, etc. It should not be placed in
rooms where the temperature is less
than 0 °C (32 °F) or greater than 40 °C
(104 °F). Damp basements should
also be avoided.
L The maximum calling distance may be
shortened when the product is used in
the following places: Near obstacles
such as hills, tunnels, underground,
near metal objects such as wire
fences, etc.
L Operating the product near electrical
appliances may cause interference.
Move away from the electrical
appliances.
Routine care
L Wipe the outer surface of the
product with a soft moist cloth.
L Do not use benzine, thinner, or any
abrasive powder.
Notice for product disposal, transfer,
or return
L This product can store your private/
confidential information. To protect
your privacy/confidentiality, we
recommend that you erase
information such as phonebook or
caller list entries from the memory
before you dispose of, transfer, or
return the product.
Temporary Confidential
TG106x.book Page 5 Tuesday, October 28, 2008 3:25 PM
Other information
Notice
ENERGY STAR
As an ENERGY STAR® Participant,
Panasonic has determined that this product
meets the ENERGY STAR guidelines for
energy efficiency. ENERGY STAR is a U.S.
registered mark.
Temporary Confidential
TG106x.book Page 6 Tuesday, October 28, 2008 3:25 PM
Controls
Handset
Base unit
Corded handset
Receiver
Soft keys
Display
{ERASE}
Navigator key ({^}/{V}/{7}/{8})
VOL. (Volume: {^}/{V})
{6} (Play)
Message indicator
{ANSWER ON}
ANSWER ON indicator
{■} (STOP) (EXIT)
{LOCATOR} {INTERCOM}
MIC (Microphone)
Speaker
Dial keypad ({*}: TONE)
{SP-PHONE} (Speakerphone)
SP-PHONE indicator
{FLASH} {CALL WAIT}
{REDIAL} {PAUSE}
{HOLD}
Speed dial buttons
A Charge indicator
Ringer indicator
Message indicator
B Speaker
C Soft keys
D {C} (TALK)
E {s} (SP-PHONE: Speakerphone)
F Headset jack
G Dial keypad ({*}: TONE)
H Receiver
I Display
J {OFF}
K Navigator key ({^}/{V})/
? (Receiver volume: {^}/{V})
L {FLASH} {CALL WAIT}
M Microphone
N Charge contacts
Temporary Confidential
TG106x.book Page 7 Tuesday, October 28, 2008 3:25 PM
Battery installation
Setting up
Connections
L Use only the supplied Panasonic AC
adaptor PQLV219.
L USE ONLY Ni-MH batteries AAA
(R03) size.
L Do NOT use Alkaline/Manganese/NiCd batteries.
L Confirm correct polarities (S, T).
NBase unit
Rechargeable Ni-MH ONLY
Battery charge
Charge for about 7 hours.
L When the batteries are fully charged,
“Charge completed” is displayed.
*For DSL/ADSL service users
NCharger
Confirm "Charging"
is displayed.
Hooks
(120 V AC, 60 Hz)
Temporary Confidential
TG106x.book Page 8 Tuesday, October 28, 2008 3:25 PM
Note when setting up
Making calls
Note for connections
Using the base unit
1 Dial the phone number.
L The AC adaptor must remain
connected at all times. (It is normal for
the adaptor to feel warm during use.)
L The AC adaptor should be connected
to a vertically oriented or floormounted AC outlet. Do not connect
the AC adaptor to a ceiling-mounted
AC outlet, as the weight of the adaptor
may cause it to become disconnected.
During a power failure
The base unit will work as a standard
telephone using power from the
telephone line and you can make or
answer calls with the corded handset.
The base unit speakerphone and the
cordless handset will not function during
a power failure.
L To correct a digit, press
{CLEAR}.
When you finish talking, place the
corded handset on the cradle.
Note:
L You can also dial the phone number
after lifting the corded handset.
Using the speakerphone
During a conversation with the
corded handset, press {SPPHONE} to turn on the
speakerphone.
L You can place the corded
handset on the cradle.
L Speak into the MIC.
L Speak alternately with the other
party.
When you finish talking, press {SPPHONE}.
Note for battery installation
L Use the supplied rechargeable
batteries. For replacement, we
recommend using the Panasonic
rechargeable batteries noted on page
xx, xx.
L Wipe the battery ends (S, T) with a
dry cloth.
L Avoid touching the battery ends (S,
T) or the unit contacts.
Note for battery charge
L It is normal for the handset to feel
warm during charging.
L Clean the charge contacts of the
handset, base unit, and charger with a
soft and dry cloth once a month. Clean
more often if the unit is exposed to
grease, dust, or high humidity.
Lift the corded handset.
Note:
L For best performance, use the
speakerphone in a quiet environment.
L To switch to the receiver, lift the
corded handset.
Using the handset
1 Lift the handset and dial the phone
number.
L To correct a digit, press
{CLEAR}.
{C}
When you finish talking, press
{OFF} or place the handset on the
charger.
Temporary Confidential
TG106x.book Page 9 Tuesday, October 28, 2008 3:25 PM
Using the speakerphone
During a conversation, press {s} to
turn on the speakerphone.
L Speak alternately with the other
party.
When you finish talking, press
{OFF}.
Note:
L For best performance, use the
speakerphone in a quiet environment.
L To switch to the receiver, press {C}.
Answering calls
Using Caller ID service
Important:
L This unit is Caller ID compatible. To
use Caller ID features, you must
subscribe to Caller ID service. Contact
your service provider/telephone
company for details.
Caller ID features
When an outside call is being received,
the name and phone number are
displayed.
Caller information for the last 50 callers
is logged in the caller list by the most
recent call to the oldest.
Using the base unit
When a call is being received, the SPPHONE indicator flashes rapidly.
Lift the corded handset or press
{SP-PHONE} when the unit rings.
When you finish talking, place the
corded handset on the cradle.
When the speakerphone is used,
press {SP-PHONE}.
Using the handset
When a call is being received, the ringer
indicator flashes rapidly.
Lift the handset and press {C} or
{s} when the unit rings.
L You can also answer the call by
pressing any dial key from {0} to
{9}, {*}, or {#}. (Any key
answer feature)
When you finish talking, press
{OFF} or place the handset on the
charger.
Turning the answering
system on/off
Base unit
Press {ANSWER ON} to turn on/off the
answering system.
Handset
NTo turn on:
{MENU} i {#}{3}{2}{7}
{OFF}
NTo turn off:
{MENU} i {#}{3}{2}{8}
{OFF}
Note for base unit and handset:
L When the answering system is turned
on, the ANSWER ON indicator on the
base unit lights up.
Temporary Confidential
TG106x.book Page 10 Tuesday, October 28, 2008 3:25 PM
Greeting message
Recording your greeting
message using the handset
1 {MENU} i {#}{3}{0}{2}
2 {V}/{^}: “Yes” i {SELECT}
3 After a beep sounds, speak clearly
(2 minutes max.).
Press {STOP} to stop recording.
{OFF}
Listening to messages
using the base unit
When new messages have been
recorded, the message indicator on the
base unit flashes.
Press {6}.
L If new messages have been recorded,
the base unit plays back new
messages.
L If there are no new messages, the
base unit plays back all messages.
10
Temporary Confidential
TG106x.book Page 11 Tuesday, October 28, 2008 3:25 PM
FCC and other information
This equipment complies with Part 68
of the FCC rules and the requirements
adopted by the ACTA. On the bottom
of this equipment is a label that
contains, among other information, a
product identifier in the format
US:ACJ----------.
If requested, this number must be
provided to the telephone company.
L Registration No
............(found on the bottom of the
unit)
L Ringer Equivalence No.
(REN).......0.1B
L Ringer Equivalence No. (REN:
Under a power failure).......1.0B
US:AAAEQ##TXXXX. The digits
represented by ## are the REN
without a decimal point (e.g., 03 is a
REN of 0.3).
A plug and jack used to connect this
equipment to the premises wiring and
telephone network must comply with
the applicable FCC Part 68 rules and
requirements adopted by the ACTA. A
compliant telephone cord and modular
plug is provided with the product. It is
designed to be connected to a
compatible modular jack that is also
compliant.
The telephone company may make
changes in its facilities, equipment,
operations or procedures that could
affect the operation of the equipment.
If this happens the telephone company
will provide advance notice in order for
you to make necessary modifications
to maintain uninterrupted service.
The REN is used to determine the
number of devices that may be
connected to a telephone line.
Excessive RENs on a telephone line
may result in the devices not ringing in
response to an incoming call. In most
but not all areas, the sum of RENs
should not exceed five (5.0). To be
certain of the number of devices that
may be connected to a line, as
determined by the total RENs, contact
the local telephone company. For
products approved after July 23, 2001,
the REN for the product is part of the
product identifier that has the format
If this equipment causes harm to the
telephone network, the telephone
company will notify you in advance
that temporary discontinuance of
service may be required. But if
advance notice isn't practical, the
telephone company will notify the
customer as soon as possible. Also,
you will be advised of your right to file
a complaint with the FCC if you
believe it is necessary.
If trouble is experienced with this
equipment, for repair or warranty
information, please contact a Factory
Service Center or other Authorized
Servicer. If the equipment is causing
harm to the telephone network, the
telephone company may request that
you disconnect the equipment until the
problem is resolved.
Connection to party line service is
subject to state tariffs. Contact the
state public utility commission, public
service commission or corporation
commission for information.
If your home has specially wired alarm
equipment connected to the telephone
11
Temporary Confidential
TG106x.book Page 12 Tuesday, October 28, 2008 3:25 PM
line, ensure the installation of this
equipment does not disable your
alarm equipment. If you have
questions about what will disable
alarm equipment, consult your
telephone company or a qualified
installer.
This equipment is hearing aid
compatible as defined by the FCC in
47 CFR Section 68.316.
When you hold the phone to your ear,
noise might be heard in your Hearing
Aid. Some Hearing Aids are not
adequately shielded from external RF
(radio frequency) energy. If noise
occurs, use an optional headset
accessory or the speakerphone option
(if applicable) when using this phone.
Consult with your audiologist or
Hearing Aid manufacturer about the
availability of Hearing Aids which
provide adequate shielding to RF
energy commonly emitted by digital
devices.
WHEN PROGRAMMING
EMERGENCY NUMBERS AND(OR)
MAKING TEST CALLS TO
EMERGENCY NUMBERS:
1) Remain on the line and briefly
explain to the dispatcher the reason
for the call.
2) Perform such activities in the offpeak hours, such as early morning
or late evenings.
This device complies with Part 15 of
the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful
interference, and (2) this device must
accept any interference received,
including interference that may cause
undesired operation.
Privacy of communications may not
be ensured when using this phone.
12
CAUTION:
Any changes or modifications not
expressly approved by the party
responsible for compliance could void
the user’s authority to operate this
device.
NOTE:
This equipment has been tested and
found to comply with the limits for a
Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are
designed to provide reasonable
protection against harmful interference
in a residential installation. This
equipment generates, uses, and can
radiate radio frequency energy and, if
not installed and used in accordance
with the instructions, may cause
harmful interference to radio
communications. However, there is no
guarantee that interference will not
occur in a particular installation. If this
equipment does cause harmful
interference to radio or television
reception, which can be determined by
turning the equipment off and on, the
user is encouraged to try to correct the
interference by one or more of the
following measures:
– Reorient or relocate the receiving
antenna.
– Increase the separation between the
equipment and receiver.
– Connect the equipment into an outlet
on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced
radio/TV technician for help.
Some cordless telephones operate at
frequencies that may cause
interference to nearby TVs and VCRs.
To minimize or prevent such
interference, the base of the cordless
telephone should not be placed near
or on top of a TV or VCR. If
Temporary Confidential
TG106x.book Page 13 Tuesday, October 28, 2008 3:25 PM
interference is experienced, move the
cordless telephone further away from
the TV or VCR. This will often reduce,
or eliminate, interference.
Notice
FCC RF Exposure Warning:
L This product complies with FCC
radiation exposure limits set forth for
an uncontrolled environment.
L To comply with FCC RF exposure
requirements, the base unit must be
installed and operated 20 cm (8
inches) or more between the
product and all person’s body
(excluding extremities of hands,
wrist and feet).
L This product may not be collocated
or operated in conjunction with any
other antenna or transmitter.
L The handset may be carried and
operated with only the specific
provided belt-clip. Other non-tested
belt-clips or similar body-worn
accessories may not comply and
must be avoided.
Notice
Compliance with TIA-1083 standard:
Telephone handsets identified with this
logo have reduced noise and interference
when used with T-Coil equipped hearing
aids and cochlear implants.
ENERGY STAR
As an ENERGY STAR® Participant,
Panasonic has determined that this
product meets the ENERGY STAR
guidelines for energy efficiency.
ENERGY STAR is a U.S. registered
mark.
Compatible with
Hearing Aid T-Coil
TIA-1083
13
Temporary Confidential
TG106x.book Page 2 Tuesday, October 28, 2008 3:25 PM
If you need assistance with setup or operation
1. Visit our website: http://www.panasonic.com/help
2. Contact us via the web at: http://www.panasonic.com/contactinfo
3. Call us at: 1-800-211-PANA (1-800-211-7262)
TTY users (hearing or speech impaired users) can call 1-877-833-8855.
When you ship the product
L Carefully pack your unit, preferably in the original carton.
L Attach a letter, detailing the symptom.
L Send the unit to PSTC (Panasonic) Exchange Center, prepaid and
adequately insured.
L Do not send your unit to Panasonic Consumer Electronics Company listed below
or to executive or regional sales offices. These locations do not repair consumer
products.
Panasonic Consumer Electronics Company,
Division of Panasonic Corporation of North America
One Panasonic Way, Secaucus, New Jersey 07094
Copyright:
This material is copyrighted by Panasonic Communications Co., Ltd., and may be
reproduced for internal use only. All other reproduction, in whole or in part, is
prohibited without the written consent of Panasonic Communications Co., Ltd.
© Panasonic Communications Co., Ltd. 2008

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-702
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Create Date                     : 2008:10:30 11:28:04+09:00
Modify Date                     : 2008:12:01 13:19:48+09:00
Metadata Date                   : 2008:12:01 13:19:48+09:00
Creator Tool                    : PScript5.dll Version 5.2
Document ID                     : uuid:A36E8D5E2AA6DD11BDABE000F60E99A8
Instance ID                     : uuid:b0314256-03a6-4ca2-9238-3a143a626f93
Derived From Instance ID        : uuid:b1784d19-51a7-4c5e-8a7d-a0b1815c15f7
Derived From Document ID        : uuid:07787276-5226-4f1d-aae0-904c294e1d88
Format                          : application/pdf
Creator                         : 5098687
Title                           : TG106x_1028_shinsei[1].pdf
Page Count                      : 14
Author                          : 5098687

EXIF Metadata provided by EXIF.tools