Panasonic of North America 96NKX-TGA106 Part 15 Unlicensed PCS Portable Tx Held to Ear User Manual TG106x 1028 shinsei 1

Panasonic Corporation of North America Part 15 Unlicensed PCS Portable Tx Held to Ear TG106x 1028 shinsei 1

User Manual

Temporary ConfidentialThis unit is compatible with Caller ID. You must subscribe to the appropriate service offered by your service provider/telephone company.Please read these operating instructions before using the unit and save them for future reference.Charge the handset batteries for about 7 hours before initial use.Operating InstructionsExpandable Digital Corded/Cordless Answering SystemModel No. KX-TG1061with 2 HandsetsModel No. KX-TG1062with 3 HandsetsModel No. KX-TG1063TG106x.book Page 1 Tuesday, October 28, 2008 3:25 PM
Temporary Confidential2For your safetyTo prevent severe injury and loss of life/property, read this section carefully before using the product to ensure proper and safe operation of your product.WARNINGPower connectionLUse only the power source marked on the product.LDo not overload power outlets and extension cords. This can result in the risk of fire or electric shock.LCompletely insert the AC adaptor/power plug into the power outlet. Failure to do so may cause electric shock and/or excessive heat resulting in a fire.LRegularly remove any dust, etc. from the AC adaptor/power plug by pulling it from the power outlet, then wiping with a dry cloth. Accumulated dust may cause an insulation defect from moisture, etc. resulting in a fire.LUnplug the product from power outlets if it emits smoke, an abnormal smell, or makes an unusual noise. These conditions can cause fire or electric shock. Confirm that smoke has stopped emitting and contact the Panasonic Call Center at 1-800-211-PANA (1-800-211-7262).LUnplug from power outlets and never touch the inside of the product if its casing has been broken open.LNever touch the plug with wet hands. Danger of electric shock exists.InstallationLTo prevent the risk of fire or electrical shock, do not expose the product to rain or any type of moisture.LDo not place or use this product near automatically controlled devices such as automatic doors and fire alarms. Radio waves emitted from this product may cause such devices to malfunction resulting in an accident.LDo not allow the AC adaptor or telephone line cord to be excessively pulled, bent or placed under heavy objects.Operating safeguardsLUnplug the product from power outlets before cleaning. Do not use liquid or aerosol cleaners.LDo not disassemble the product.LDo not spill liquids (detergents, cleansers, etc.) onto the telephone line cord plug, or allow it to become wet at all. This may cause a fire. If the telephone line cord plug becomes wet, immediately pull it from the telephone wall jack, and do not use.MedicalLConsult the manufacturer of any personal medical devices, such as pacemakers or hearing aids, to determine if they are adequately shielded from external RF (radio frequency) energy. (The product operates in the frequency range of 1.92 GHz to 1.93 GHz, and the RF transmission power is 115 mW (max.).)LDo not use the product in health care facilities if any regulations posted in the area instruct you not to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.TG106x.book Page 2 Tuesday, October 28, 2008 3:25 PML To prevent the risk of fire or electricalshock, do not expose the product torain or any type of moisture.L Do not place or use this product nearautomatically controlled devices suchas automatic doors and fire alarms.Radio waves emitted from this productmay cause such devices to malfunctionresulting in an accident.L Do not allow the AC adaptor or telephoneline cord to be excessively pulled, bent orplaced under heavy objects.L Do not excessively pull the cordedhandset cord from the base unit. This maycause the base unit to fall, resulting in injury.
Temporary Confidential3CAUTIONInstallation and relocationLNever install telephone wiring during an electrical storm.LNever install telephone line jacks in wet locations unless the jack is specifically designed for wet locations.LNever touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface.LUse caution when installing or modifying telephone lines.LThe AC adaptor is used as the main disconnect device. Ensure that the AC outlet is installed near the product and is easily accessible.LThe cordless handset is unable to make calls when:– the handset batteries need recharging or have failed.– there is a power failure.BatteryLWe recommend using the batteries noted on page 5. USE ONLY rechargeable Ni-MH batteries AAA (R03) size.LDo not mix old and new batteries.LDo not open or mutilate the batteries. Released electrolyte from the batteries is corrosive and may cause burns or injury to the eyes or skin. The electrolyte may be toxic if swallowed.LExercise care when handling the batteries. Do not allow conductive materials such as rings, bracelets or keys to touch the batteries, otherwise a short circuit may cause the batteries and/or the conductive material to overheat and cause burns.LCharge the batteries provided with or identified for use with this product only, in accordance with the instructions and limitations specified in this manual.LOnly use a compatible charger tocharge the batteries. Do not tamperwith the charger. Failure to followthese instructions may cause thebatteries to swell or explede.Attention:A nickel metal hydride battery that is recyclable powers the product you have purchased.Please call 1-800-8-BATTERY (1-800-822-8837) for information on how to recycle this battery.Important safety instructionsWhen using your product, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following:1. Do not use this product near water for example, near a bathtub, washbowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool.2. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning.TG106x.book Page 3 Tuesday, October 28, 2008 3:25 PM
Temporary Confidential43. Do not use the telephone to report a gas leak in the vicinity of the leak.4. Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for possible special disposal instructions.SAVE THESE INSTRUCTIONSFor best performanceBase unit location/avoiding noiseThe base unit and other compatible Panasonic units use radio waves to communicate with each other.LFor maximum coverage and noise-free communications, place your base unit:– at a convenient, high, and central location with no obstructions between the cordless handset and base unit in an indoor environment.– away from electronic appliances such as TVs, radios, personal computers, wireless devices or other phones.– avoid facing radio frequency transmitters, such as external antennas of mobile phone cell stations (avoid putting the base unit on a bay window or near a window).LCoverage and voice quality depends on the local environmental conditions.LIf the reception for a base unit location is not satisfactory, move the base unit to another location for better reception.EnvironmentLKeep the product away from electrical noise generating devices, such as fluorescent lamps and motors.LThe product should be kept free from excessive smoke, dust, high temperature, and vibration.LThe product should not be exposed to direct sunlight.LDo not place heavy objects on top of the product.LWhen you leave the product unused for a long period of time, unplug the product from the power outlet.LThe product should be kept away from heat sources such as heaters, kitchen stoves, etc. It should not be placed in rooms where the temperature is less than 0 °C (32 °F) or greater than 40 °C(104 °F). Damp basements should also be avoided.LThe maximum calling distance may be shortened when the product is used in the following places: Near obstacles such as hills, tunnels, underground, near metal objects such as wire fences, etc.LOperating the product near electrical appliances may cause interference. Move away from the electrical appliances.Routine careLWipe the outer surface of the product with a soft moist cloth.LDo not use benzine, thinner, or any abrasive powder.Notice for product disposal, transfer, or returnLThis product can store your private/confidential information. To protect your privacy/confidentiality, we recommend that you erase information such as phonebook or caller list entries from the memory before you dispose of, transfer, or return the product.TG106x.book Page 4 Tuesday, October 28, 2008 3:25 PM
Temporary Confidential5Other informationENERGY STAR As an ENERGY STAR® Participant, Panasonic has determined that this product meets the ENERGY STAR guidelines for energy efficiency. ENERGY STAR is a U.S. registered mark.NoticeTG106x.book Page 5 Tuesday, October 28, 2008 3:25 PM
Temporary Confidential6ControlsBase unitACorded handsetBReceiverCSoft keysDDisplayE{ERASE}FNavigator key ({^}/{V}/{7}/{8})VOL. (Volume: {^}/{V})G{6} (Play)Message indicatorH{ANSWER ON}IANSWER ON indicatorJ{■} (STOP) (EXIT)K{LOCATOR}{INTERCOM}LMIC (Microphone)MSpeakerNDial keypad ({*}: TONE)O{SP-PHONE} (Speakerphone)SP-PHONE indicatorP{FLASH}{CALL WAIT}Q{REDIAL}{PAUSE}R{HOLD}SSpeed dial buttonsHandsetACharge indicatorRinger indicatorMessage indicatorBSpeakerCSoft keysD{C} (TALK)E{s} (SP-PHONE: Speakerphone)FHeadset jackGDial keypad ({*}: TONE)HReceiverIDisplayJ{OFF}KNavigator key ({^}/{V})/? (Receiver volume: {^}/{V})L{FLASH}{CALL WAIT}MMicrophoneNCharge contactsTG106x.book Page 6 Tuesday, October 28, 2008 3:25 PM
Temporary Confidential7Setting upConnectionsLUse only the supplied Panasonic AC adaptor PQLV219.NBase unit*For DSL/ADSL service usersNChargerBattery installationLUSE ONLY Ni-MH batteries AAA (R03) size.LDo NOT use Alkaline/Manganese/Ni-Cd batteries.LConfirm correct polarities (S,T).Battery chargeCharge for about 7 hours.LWhen the batteries are fully charged, “Charge completed” is displayed.(120 V AC, 60 Hz)HooksRechargeable Ni-MH ONLYConfirm "Charging"is displayed.TG106x.book Page 7 Tuesday, October 28, 2008 3:25 PM
Temporary Confidential8Note when setting upNote for connectionsLThe AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.)LThe AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the adaptor may cause it to become disconnected.During a power failureThe base unit will work as a standard telephone using power from the telephone line and you can make or answer calls with the corded handset. The base unit speakerphone and the cordless handset will not function during a power failure.Note for battery installationLUse the supplied rechargeable batteries. For replacement, we recommend using the Panasonic rechargeable batteries noted on page xx, xx.LWipe the battery ends (S,T) with a dry cloth.LAvoid touching the battery ends (S,T) or the unit contacts.Note for battery chargeLIt is normal for the handset to feel warm during charging.LClean the charge contacts of the handset, base unit, and charger with a soft and dry cloth once a month. Clean more often if the unit is exposed to grease, dust, or high humidity.Making callsUsing the base unit1Dial the phone number.LTo correct a digit, press {CLEAR}.2Lift the corded handset.3When you finish talking, place the corded handset on the cradle.Note:LYou can also dial the phone number after lifting the corded handset.Using the speakerphone 1During a conversation with the corded handset, press {SP-PHONE} to turn on the speakerphone.LYou can place the corded handset on the cradle.LSpeak into the MIC.LSpeak alternately with the other party.2When you finish talking, press {SP-PHONE}.Note:LFor best performance, use the speakerphone in a quiet environment.LTo switch to the receiver, lift the corded handset.Using the handset1Lift the handset and dial the phone number.LTo correct a digit, press {CLEAR}.2{C}3When you finish talking, press {OFF} or place the handset on the charger.TG106x.book Page 8 Tuesday, October 28, 2008 3:25 PM
Temporary Confidential9Using the speakerphone1During a conversation, press {s} to turn on the speakerphone.LSpeak alternately with the other party.2When you finish talking, press {OFF}.Note:LFor best performance, use the speakerphone in a quiet environment.LTo switch to the receiver, press {C}.Answering callsUsing the base unitWhen a call is being received, the SP-PHONE indicator flashes rapidly.1Lift the corded handset or press {SP-PHONE} when the unit rings.2When you finish talking, place the corded handset on the cradle. When the speakerphone is used, press {SP-PHONE}.Using the handsetWhen a call is being received, the ringer indicator flashes rapidly.1Lift the handset and press {C} or {s} when the unit rings.LYou can also answer the call by pressing any dial key from {0} to {9},{*}, or {#}.(Any key answer feature)2When you finish talking, press {OFF} or place the handset on the charger.Using Caller ID serviceImportant:LThis unit is Caller ID compatible. To use Caller ID features, you must subscribe to Caller ID service. Contact your service provider/telephone company for details.Caller ID featuresWhen an outside call is being received, the name and phone number are displayed.Caller information for the last 50 callers is logged in the caller list by the most recent call to the oldest.Turning the answering system on/offPress {ANSWER ON} to turn on/off the answering system.NTo turn on:1{MENU}i{#}{3}{2}{7}2{OFF}NTo turn off:1{MENU}i{#}{3}{2}{8}2{OFF}Note for base unit and handset:LWhen the answering system is turned on, the ANSWER ON indicator on the base unit lights up.Base unitHandsetTG106x.book Page 9 Tuesday, October 28, 2008 3:25 PM
Temporary Confidential10Greeting messageRecording your greeting message using the handset1{MENU}i{#}{3}{0}{2}2{V}/{^}:“Yes”i{SELECT}3After a beep sounds, speak clearly (2 minutes max.).4Press {STOP} to stop recording.5{OFF}Listening to messages using the base unitWhen new messages have been recorded, the message indicator on the base unit flashes.Press {6}.LIf new messages have been recorded, the base unit plays back new messages.LIf there are no new messages, the base unit plays back all messages.TG106x.book Page 10 Tuesday, October 28, 2008 3:25 PM
Temporary Confidential11FCC and other informationThis equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US:ACJ----------.If requested, this number must be provided to the telephone company.L Registration No ............(found on the bottom of the unit)L Ringer Equivalence No.(REN).......0.1BL Ringer Equivalence No. (REN: Under a power failure).......1.0BA plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with the product. It is designed to be connected to a compatible modular jack that is also compliant.The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company. For products approved after July 23, 2001, the REN for the product is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3).If this equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But if advance notice isn't practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary.The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the operation of the equipment. If this happens the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted service.If trouble is experienced with this equipment, for repair or warranty information, please contact a Factory Service Center or other Authorized Servicer. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved.Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission or corporation commission for information.If your home has specially wired alarm equipment connected to the telephoneTG106x.book Page 11 Tuesday, October 28, 2008 3:25 PM
Temporary Confidential12line, ensure the installation of this equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer.This equipment is hearing aid compatible as defined by the FCC in 47 CFR Section 68.316.When you hold the phone to your ear, noise might be heard in your Hearing Aid. Some Hearing Aids are not adequately shielded from external RF (radio frequency) energy. If noise occurs, use an optional headset accessory or the speakerphone option (if applicable) when using this phone. Consult with your audiologist or Hearing Aid manufacturer about the availability of Hearing Aids which provide adequate shielding to RF energy commonly emitted by digital devices.WHEN PROGRAMMING EMERGENCY NUMBERS AND(OR) MAKING TEST CALLS TO EMERGENCY NUMBERS:1) Remain on the line and briefly explain to the dispatcher the reason for the call.2) Perform such activities in the off-peak hours, such as early morning or late evenings.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Privacy of communications may not be ensured when using this phone.CAUTION:Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this device.NOTE:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:– Reorient or relocate the receiving antenna.– Increase the separation between the equipment and receiver.– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.– Consult the dealer or an experienced radio/TV technician for help.Some cordless telephones operate at frequencies that may cause interference to nearby TVs and VCRs. To minimize or prevent such interference, the base of the cordless telephone should not be placed near or on top of a TV or VCR. If TG106x.book Page 12 Tuesday, October 28, 2008 3:25 PM
Temporary Confidential13interference is experienced, move the cordless telephone further away from the TV or VCR. This will often reduce, or eliminate, interference.FCC RF Exposure Warning:L This product complies with FCC radiation exposure limits set forth for an uncontrolled environment. L To comply with FCC RF exposure requirements, the base unit must be installed and operated 20 cm (8 inches) or more between the product and all person’s body (excluding extremities of hands, wrist and feet). L This product may not be collocated or operated in conjunction with any other antenna or transmitter.L The handset may be carried and operated with only the specific provided belt-clip. Other non-tested belt-clips or similar body-worn accessories may not comply and must be avoided.NoticeNoticeENERGY STAR As an ENERGY STAR® Participant, Panasonic has determined that this product meets the ENERGY STAR guidelines for energy efficiency. ENERGY STAR is a U.S. registered mark.Compliance with TIA-1083 standard: Telephone handsets identified with this logo have reduced noise and interference when used with T-Coil equipped hearing aids and cochlear implants.TCompatible withHearing Aid T-CoilTIA-1083TG106x.book Page 13 Tuesday, October 28, 2008 3:25 PM
Temporary ConfidentialIf you need assistance with setup or operation1. Visit our website: http://www.panasonic.com/help2. Contact us via the web at: http://www.panasonic.com/contactinfo3. Call us at: 1-800-211-PANA (1-800-211-7262)TTY users (hearing or speech impaired users) can call 1-877-833-8855.When you ship the productLCarefully pack your unit, preferably in the original carton.LAttach a letter, detailing the symptom.LSend the unit to PSTC (Panasonic) Exchange Center, prepaid and adequately insured.LDo not send your unit to Panasonic Consumer Electronics Company listed below or to executive or regional sales offices. These locations do not repair consumer products.Panasonic Consumer Electronics Company,Division of Panasonic Corporation of North AmericaOne Panasonic Way, Secaucus, New Jersey 07094Copyright:This material is copyrighted by Panasonic Communications Co., Ltd., and may be reproduced for internal use only. All other reproduction, in whole or in part, is prohibited without the written consent of Panasonic Communications Co., Ltd.© Panasonic Communications Co., Ltd. 2008TG106x.book Page 2 Tuesday, October 28, 2008 3:25 PM

Navigation menu