Panasonic of North America 96NKX-TGE670 UPCS Base Station with BT User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3680915
Application ID	Dk4I2ptxvMRQIcupEaC2ew==
Document Description	user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	211.14kB (2639261 bits)
Date Submitted	2017-12-15 00:00:00
Date Available	2018-02-04 00:00:00
Creation Date	2017-09-15 16:57:55
Producing Software	Antenna House PDF Output Library 2.6.0 (Windows)
Document Lastmod	2017-09-15 16:57:55
Document Title	user manual
Document Creator	XSL Formatter V4.3 MR6i (4,3,2013,0121) for Windows
Document Author:	Panasonic System Networks Co., Ltd.

Operating Instructions
Cordless Telephone with Bluetooth
and Digital Answering Machine
Model No.
KX-TGE663
KX-TG854SK
KX-TGE674
KX-TGE675
Model shown is KX-TGE663.
Before initial use, see “Getting Started”
on page 12.
Thank you for purchasing a Panasonic product.
Please read these operating instructions before using the unit and save them for
future reference.
Consulte “Guía Rápida Española”, página 90.
For assistance, visit our Web site: http://shop.panasonic.com/support for
customers in the U.S.A.
Please register your product: http://shop.panasonic.com/support
Table of Contents
Introduction
Call Block
Model composition .......................................4
Accessory information ..................................4
Graphical symbols for use on equipment and
their descriptions ..........................................7
Call block ....................................................35
Storing unwanted callers ............................35
Automated callers block
For your safety .............................................8
Important safety instructions ........................9
For best performance ...................................9
Other information .......................................10
Specifications .............................................11
Automated callers block .............................38
Storing allow name list ...............................38
Displaying and clearing blocked call
counts .........................................................39
Changing the access code .........................39
Automated callers block greeting
message .....................................................39
Getting Started
Phonebook
Setting up ...................................................12
Controls ......................................................14
Display icons/Indicators .............................16
Language settings ......................................17
Date and time .............................................17
Recording your greeting message .............18
Other settings .............................................18
Phonebook .................................................41
Speed dial ..................................................43
Important Information
Link to Cell
Link to cell feature ......................................19
Pairing a cellular phone ..............................19
Link to cell settings .....................................20
HD voice .....................................................22
Making/Answering Calls Using
the Handset
Making cellular calls ...................................24
Making landline calls ..................................24
Answering calls ..........................................25
Useful features during a call .......................25
Power backup operation for landline ..........28
Making/Answering Calls Using
the Base Unit
Making cellular calls ...................................30
Making landline calls ..................................30
Answering calls ..........................................30
Useful features during a call .......................31
Locator/Intercom
Handset locator ..........................................33
Cell locator .................................................33
Intercom .....................................................33
Programming
Menu list .....................................................45
Alarm ..........................................................53
Silent mode ................................................54
Baby monitor ..............................................55
Other programming ....................................57
Registering a unit .......................................57
Caller ID Service
Using Caller ID service ...............................58
Caller list ....................................................58
Using Bluetooth® Devices
Copying phonebook from a cellular phone
(phonebook transfer) ..................................60
Link to Cell app ..........................................61
Text message (SMS) alert .........................62
Alert settings for your DECT phone ...........62
Remote voice assist ...................................63
Using a Bluetooth headset (optional) .........64
Answering System for Landline
Answering system for landline ...................66
Turning the answering system on/off .........66
Greeting message ......................................66
Listening to messages ...............................67
Advanced new message alerting
features ......................................................68
Remote operation .......................................70
Answering system settings .........................71
Table of Contents
Useful Information
Voicemail service for landline .....................73
Wall mounting ............................................74
Error messages ..........................................77
Troubleshooting .........................................78
FCC and other information .........................87
Guía Rápida Española
Guía Rápida Española ...............................90
Appendix
Customer services ...................................100
Limited Warranty (ONLY FOR U.S.A.) .....101
Index
Index.........................................................103
Introduction
Model composition
n KX-TGE660 series
n KX-TGE670 series
R Model shown is KX-TGE663.
R Model shown is KX-TGE674.
Base unit
Handset
Part No.
Part No.
KX-TGE663
KX-TGE660
KX-TGEA61
KX-TG854SK
KX-TGE660
KX-TGEA61
KX-TGE674
KX-TGE670
KX-TGEA61
KX-TGE675
KX-TGE670
KX-TGEA61
Series
Model No.
KX-TGE660
series
KX-TGE670
series
Quantity
Accessory information
Supplied accessories
Quantity
No.
Accessory item/Part number
AC adaptor/PNLV226-0X
Telephone line cord/PNJA1186Z
Wall mounting adaptor/PNKL1001X1
Rechargeable batteries*1
10
Handset cover/PNYNTGEA60BR*2
Belt clip/PNKE2125Z1
Charger/PNLC1079ZB
*1
*2
KX-TGE663
KX-TG854SK
KX-TGE674
KX-TGE675
See page 5 for replacement battery information.
The handset cover comes attached to the handset.
For assistance, please visit http://shop.panasonic.com/support
Introduction
Additional/replacement accessories
Please contact your nearest Panasonic dealer for sales information (page 100).
Accessory item
Model number/Specifications
Rechargeable
batteries
HHR-4DPA*1
R To order, please visit http://shop.panasonic.com/support
Battery type:
– Nickel metal hydride (Ni-MH)
– 2 x AAA (R03) size for each handset
Headset
KX-TCA93, KX-TCA430
Range extender
KX-TGA407*2
Key detector
KX-TGA20*3
*1
*2
*3
Replacement batteries may have a different capacity from that of the supplied batteries.
By installing this unit, you can extend the range of your phone system to include areas
where reception was previously not available. This product can be purchased online. Please
visit our Web site: http://shop.panasonic.com/support
By registering the key detector (4 max.) to a Panasonic Digital Cordless Phone and
attaching it to an easy-to-lose item in advance, you can locate and find the mislaid item to
which the key detector is attached. Please visit our Web site:
http://www.panasonic.com/tga20
Other information
R Design and specifications are subject to change without notice.
R The illustrations in these instructions may vary slightly from the actual product.
For assistance, please visit http://shop.panasonic.com/support
Introduction
Expanding your phone system
Handset (optional): KX-TGEA61
You can expand your phone system by
registering optional handsets (6 max.) to a
single base unit.
R Optional handsets may be a different color
from that of the supplied handsets.
Bluetooth® devices
You can expand your phone system by pairing the following units to a single base unit.
Your Bluetooth cellular phone*1: 2 max.
(for cellular calls: page 19)
Your Bluetooth headset*1: 1 max.
(for a wireless hands-free conversation: page 64)
*1
Your cellular phone and headset must be Bluetooth wireless technology compatible. For
more details and the list of compatible cellular phones, please visit our Web site:
http://shop.panasonic.com/bluetooth-phone
Trademarks
R The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.,
and any use of such marks by Panasonic Corporation is under license.
R iPhone is a registered trademark of Apple Inc.
R Android is a trademark of Google Inc.
R Gmail and Google Calendar are trademarks of Google Inc.
R Facebook is trademark of Facebook, Inc.
R Twitter is trademark of Twitter Inc.
R Instagram is trademark of Instagram, Inc.
R BlackBerry® is owned by Research In Motion Limited and is registered in the United States
and may be pending or registered in other countries. Panasonic is not endorsed, sponsored,
affiliated with or otherwise authorized by Research In Motion Limited.
R Siri is a registered trademark of Apple Inc.
R Google Now is a trademark of Google Inc.
R S Voice is a trademark of Samsung Electronics Co., Ltd.
R All other trademarks identified herein are the property of their respective owners.
For assistance, please visit http://shop.panasonic.com/support
Introduction
Graphical symbols for use on equipment and their
descriptions
Symbol
Explanation
Symbol
Explanation
Alternating current (A.C.)
Class P equipment
(equipment in which
protection against electric
shock relies on Double
Insulation or Reinforced
Insulation)
Direct current (D.C.)
“ON” (power)
Protective earth
“OFF” (power)
Protective bonding earth
Stand-by (power)
Functional earth
“ON”/“OFF” (power;
push-push)
For indoor use only
Caution, risk of electric
shock
For assistance, please visit http://shop.panasonic.com/support
Important Information
For your safety
To prevent severe injury and loss of life/
property, read this section carefully before
using the product to ensure proper and safe
operation of your product.
WARNING
Power connection
R Use only the power source marked on the
product.
R Do not overload power outlets and
extension cords. This can result in the risk
of fire or electric shock.
R Completely insert the AC adaptor/power
plug into the power outlet. Failure to do so
may cause electric shock and/or excessive
heat resulting in a fire.
R Regularly remove any dust, etc. from the
AC adaptor/power plug by pulling it from
the power outlet, then wiping with a dry
cloth. Accumulated dust may cause an
insulation defect from moisture, etc.
resulting in a fire.
R Unplug the product from power outlets if it
emits smoke, an abnormal smell, or makes
an unusual noise. These conditions can
cause fire or electric shock. Confirm that
smoke has stopped emitting and contact us
at http://shop.panasonic.com/support
R Unplug from power outlets and never touch
the inside of the product if its casing has
been broken open.
R Never touch the plug with wet hands.
Danger of electric shock exists.
Installation
R To prevent the risk of fire or electrical
shock, do not expose the product to rain or
any type of moisture.
R Do not place or use this product near
automatically controlled devices such as
automatic doors and fire alarms. Radio
waves emitted from this product may cause
such devices to malfunction resulting in an
accident.
R Do not allow the AC adaptor or telephone
line cord to be excessively pulled, bent or
placed under heavy objects.
Operating safeguards
R Unplug the product from power outlets
before cleaning. Do not use liquid or
aerosol cleaners.
R Do not disassemble the product.
R Do not spill liquids (detergents, cleansers,
etc.) onto the telephone line cord plug, or
allow it to become wet at all. This may
cause a fire. If the telephone line cord plug
becomes wet, immediately pull it from the
telephone wall jack, and do not use.
Medical
R Consult the manufacturer of any personal
medical devices, such as pacemakers or
hearing aids, to determine if they are
adequately shielded from external RF
(radio frequency) energy. (The product
operates in the frequency range of
1.92 GHz to 1.93 GHz, and the RF
transmission power is 115 mW (max.).)
R Do not use the product in health care
facilities if any regulations posted in the
area instruct you not to do so. Hospitals or
health care facilities may be using
equipment that could be sensitive to
external RF energy.
CAUTION
Installation and location
R Never install telephone wiring during an
electrical storm.
R Never install telephone line jacks in wet
locations unless the jack is specifically
designed for wet locations.
R Never touch uninsulated telephone wires or
terminals unless the telephone line has
been disconnected at the network interface.
R Use caution when installing or modifying
telephone lines.
R The AC adaptor is used as the main
disconnect device. Ensure that the AC
outlet is installed near the product and is
easily accessible.
For assistance, please visit http://shop.panasonic.com/support
Important Information
R This product is unable to make calls when:
– the handset batteries need recharging or
have failed.
– there is a power failure.
Battery
R We recommend using the batteries noted
on page 5. USE ONLY rechargeable
Ni-MH batteries AAA (R03) size.
R Do not mix old and new batteries.
R Do not open or mutilate the batteries.
Released electrolyte from the batteries is
corrosive and may cause burns or injury to
the eyes or skin. The electrolyte is toxic and
may be harmful if swallowed.
R Exercise care when handling the batteries.
Do not allow conductive materials such as
rings, bracelets, or keys to touch the
batteries, otherwise a short circuit may
cause the batteries and/or the conductive
material to overheat and cause burns.
R Charge the batteries provided with or
identified for use with this product only, in
accordance with the instructions and
limitations specified in this manual.
R Only use a compatible base unit (or
charger) to charge the batteries. Do not
tamper with the base unit (or charger).
Failure to follow these instructions may
cause the batteries to swell or explode.
Attention:
A nickel metal hydride battery that is
recyclable powers the product you have
purchased.
Please call 1-800-8-BATTERY
(1-800-822-8837) for information on how to
recycle this battery.
Important safety
instructions
When using your product, basic safety
precautions should always be followed to
reduce the risk of fire, electric shock, and
injury to persons, including the following:
1. Do not use this product near water for
example, near a bathtub, washbowl,
kitchen sink, or laundry tub, in a wet
basement or near a swimming pool.
2. Avoid using a telephone (other than a
cordless type) during an electrical storm.
There may be a remote risk of electric
shock from lightning.
3. Do not use the telephone to report a gas
leak in the vicinity of the leak.
4. Use only the power cord and batteries
indicated in this manual. Do not dispose of
batteries in a fire. They may explode.
Check with local codes for possible special
disposal instructions.
SAVE THESE INSTRUCTIONS
For best performance
Base unit location/avoiding noise
The base unit and other compatible Panasonic
units use radio waves to communicate with
each other.
R For maximum coverage and noise-free
communications, place your base unit:
– at a convenient, high, and central
location with no obstructions between
the handset and base unit in an indoor
environment.
– away from electronic appliances such as
TVs, radios, personal computers,
wireless devices, or other phones.
– facing away from radio frequency
transmitters, such as external antennas
of mobile phone cell stations. (Avoid
putting the base unit on a bay window or
near a window.)
R Coverage and voice quality depends on the
local environmental conditions.
For assistance, please visit http://shop.panasonic.com/support
Important Information
R If the reception for a base unit location is
not satisfactory, move the base unit to
another location for better reception.
Environment
R Keep the product away from electrical noise
generating devices, such as fluorescent
lamps and motors.
R The product should be kept free from
excessive smoke, dust, high temperature,
and vibration.
R The product should not be exposed to
direct sunlight.
R Do not place heavy objects on top of the
product.
R When you leave the product unused for a
long period of time, unplug the product from
the power outlet.
R The product should be kept away from heat
sources such as heating devices, cooking
appliances, etc. It should not be placed in
rooms where the temperature is less than
0 °C (32 °F) or greater than 40 °C (104 °F).
Damp basements should also be avoided.
R The maximum calling distance may be
shortened when the product is used in the
following places: Near obstacles such as
hills, tunnels, underground, near metal
objects such as wire fences, etc.
R Operating the product near electrical
appliances may cause interference. Move
away from the electrical appliances.
Notice for product disposal, transfer,
or return
R This product can store your private/
confidential information. To protect your
privacy/confidentiality, we recommend that
you erase information such as phonebook
or caller list entries from the memory before
you dispose of, transfer, or return the
product.
Notice
Routine care
R Wipe the outer surface of the product
with a soft moist cloth.
R Do not use benzine, thinner, or any
abrasive powder.
Other information
CAUTION: Risk of explosion if battery is
replaced by an incorrect type. Dispose of used
batteries according to the instructions.
10
For assistance, please visit http://shop.panasonic.com/support
Important Information
Specifications
R Standard:
DECT 6.0 (Digital Enhanced Cordless
Telecommunications 6.0)
Bluetooth wireless technology 2.1
– Hands Free Profile (HFP)
– Headset Profile (HSP)
– Phone Book Access Profile (PBAP)
– Object Push Profile (OPP)
– Serial Port Profile (SPP)
– Message Access Profile (MAP)
R Frequency range:
1.92 GHz to 1.93 GHz (DECT)
2.402 GHz to 2.48 GHz (Bluetooth)
R RF transmission power:
115 mW (max.)
R Power source:
120 V AC, 60 Hz
R Power consumption:
Base unit:
Standby: 1.2 W
Maximum: 4.5 W
Charger:
Standby: 0.1 W
Maximum: 1.8 W
R Operating conditions:
0 °C – 40 °C (32 °F – 104 °F), 20 % – 80 %
relative air humidity (dry)
For assistance, please visit http://shop.panasonic.com/support
11
Getting Started
n Charger
Connect the AC adaptor to the power
outlet.
Setting up
Connections
R If you do not connect the telephone line
cord and use only cellular lines, set the
cellular line only mode to use this unit more
conveniently (page 21).
n Base unit
Connect the AC adaptor to the unit by
pressing the plug firmly.
Fasten the cord by hooking it.
Connect the AC adaptor to the power
outlet.
Connect the telephone line cord to the
unit, then to the single-line telephone jack
(RJ11C) until you hear a click.
A DSL/ADSL filter (not supplied) is
required if you have a DSL/ADSL service.
Note:
R Use only the supplied Panasonic AC
adaptor PNLV226.
Battery installation
R USE ONLY rechargeable Ni-MH batteries
AAA (R03) size (1).
R Do NOT use alkaline/manganese/Ni-Cd
batteries.
R Confirm correct polarities ( ,
).
R Follow the directions on the display to set
up the unit.
12
For assistance, please visit http://shop.panasonic.com/support
Getting Started
Removing the battery
Note when setting up
Note for connections
R The AC adaptor must remain connected at
all times. (It is normal for the adaptor to feel
warm during use.)
R The AC adaptor should be connected to a
vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a
horizontally oriented AC outlet that faces
the floor, such as an AC outlet installed on
a ceiling or under a table, as the weight of
the adaptor may cause it to become
disconnected.
Note for battery installation
R Use the supplied rechargeable batteries.
For replacement, we recommend using the
Panasonic rechargeable batteries noted on
page 5, 9.
Note for battery charging
Battery charging
Charge for about 7 hours.
R Confirm “Charging” is displayed (1).
R When the batteries are fully charged,
“Fully charged” is displayed.
R It is normal for the handset to feel warm
during charging.
R Clean the charge contacts of the handset,
base unit, and charger with a soft and dry
cloth once a month. Before cleaning the
unit, disconnect from power outlets and any
telephone line cords. Clean more often if
the unit is exposed to grease, dust, or high
humidity.
Battery level
Icon
Battery level
High
Medium
Low
Needs charging.
Empty
Note:
R At the end of each call, the unit displays a
large icon for a few moments to indicate the
battery level.
For assistance, please visit http://shop.panasonic.com/support
13
Getting Started
R You can set the unit to play a voice
announcement when the battery is low or
needs charging (page 18).
Ni-MH battery performance (supplied
batteries)
Operation
Operating time
In continuous use
12 hours max.*1
Not in use (standby)
*1
6 days
Controls
Handset
max.*1
If eco mode is on.
Note:
R Actual battery performance depends on
usage and ambient environment.
Intelligent eco mode
This feature automatically reduces handset
power consumption by suppressing handset
transmission power when the handset is close
to the base unit.
R When this feature is activated,
is
displayed. However, during a cellular call,
is not displayed even though this
feature is activated.
Ringer indicator
Message indicator
Belt clip holes
Speaker
MjN/MkN (VOL.: Volume up/down)
N (TALK)
Dial keypad
*: Temporary tone dialing
0: ( ) Ringer off
Headset jack
14
For assistance, please visit http://shop.panasonic.com/support
Getting Started
MZN (SP-PHONE: Speakerphone)
MCALL BLOCKN
Microphone
Receiver
Display
MOFFN (
N(Assist)MFLASHN
R You can use the handset to operate
the voice recognition feature of your
N.
cellular phone by pressing M
(page 63)
Charge contacts
n Control type
Soft keys
By pressing a soft key, you can select the
feature shown directly above it on the
display. After a cellular phone is paired,
MCELLN is displayed.
Navigator key
– MDN, MCN, MFN, or MEN: Scroll through
various lists and items.
– VOL. (Volume: MDN or MCN): Adjust the
receiver or speaker volume while talking.
– MFN W: View the phonebook entry.
– MEN REDIAL: View the redial list.
– MCN CID (Caller ID): View the caller list.
CELL 2 indicator
HEADSET indicator
MLOCATES CELLN
MHANDSET LOCATORN
MERASEN
MjN/MkN (VOLUME: Volume up/down)
N (PLAY/STOP)
Message indicator
MANSWER ON/OFFN
MCELL 1N (For pairing)
N (Skip)
MCELL 2N (For pairing)
N (Repeat)
n KX-TGE670 series: page 4
C F
Base unit
n KX-TGE660 series: page 4
B D
L K J
Charge contacts
Speaker
Message counter
CELL 1 indicator
R Q P O
FG
Charge contacts
Speaker
Dial keypad
MHOLDN MCONFN
MREDIALN MPAUSEN
MFLASHN MCALL WAITN
MZN (SP-PHONE: Speakerphone)
SP-PHONE indicator
Message counter
HEADSET indicator
CELL 1 indicator
CELL 2 indicator
MCELL 1N (For pairing)
N (Skip)
MCELL 2N (For pairing)
N (Repeat)
N (PLAY/STOP)
Message indicator
MANSWER ON/OFFN
For assistance, please visit http://shop.panasonic.com/support
15
Getting Started
N(Assist)
R You can use the base unit to operate
the voice recognition feature of your
N.
cellular phone by pressing M
(page 63)
MLOCATORN MINTERCOMN
MERASEN MMUTEN
MjN/MkN (VOL.: Volume up/down)
Microphone
Item
Meaning
Speakerphone is on.
(page 24)
Ringer volume is off.*3
(page 25, 47, 49)
Silent mode is on. (page 54)
Call sharing mode is off.
(page 52)
Alarm is on. (page 53)
Handset number
Display icons/Indicators
Battery level
Handset display items
Item
Blocked call (page 35)
Meaning
Automated callers block is
set to “Block”. (page 38)
Within base unit range
Baby monitor is activated.
The name/number displayed
next to the icon indicates the
monitoring unit. (page 55)
Out of base unit range
The landline is in use.
R When flashing:
The call is put on hold.
R When flashing rapidly: An
incoming call is now being
received.
– A cellular line is in use.*1
R When flashing:
The cellular call is on
hold.
R When flashing rapidly:
A cellular call is being
received.
– The remote voice assist
feature is in use.
Eco mode is on.*2 (page 14)
A cellular phone is
connected.*1 Ready to make/
receive cellular calls.
R When turned off:
A cellular phone is not
connected to the base
unit. (page 21)
– A cellular call is in
progress on that line.
– The cellular line is
selected for the setting.
Equalizer is set. (page 26)
16
In use
Answering system is being
used by another unit.
Cell1 in
use
Someone is using the
corresponding line.
Cell2 in
use
C1&C2 in
use
Line in
use
*1
*2
*3
Corresponding lines (1, 2: cellular line)
are indicated next to the item.
During a cellular call, the item is not
displayed even though the feature is
activated.
Corresponding lines (1, 2: cellular line, L:
landline) are indicated next to the item. If
all lines are turned off, no line is indicated.
Base unit display item
Item
Meaning
“Greeting only” is
selected. Caller messages
are not recorded. (page 71)
For assistance, please visit http://shop.panasonic.com/support
Getting Started
CELL indicators on the base unit
Status
Meaning
The CELL indicators show each cellular line
status.
Light off
– A Bluetooth headset is not
paired to the base unit.
– The Bluetooth headset is
not connected to the base
unit.
Status
Meaning
On
A cellular phone is connected.
Ready to make/receive
cellular calls.
Flashing
– The cellular line is in use.
– Phonebook entries are
being copied from a
cellular phone (page 60).
– The base unit is searching
for the paired cellular
phone.
– The base unit is pairing a
cellular phone.
– A cellular call is put on hold.
– The remote voice assist
feature is in use
(page 63).
Language settings
Display language
MMENUN#110
MbN: Select the desired setting. a
MSAVEN a MOFFN
Note:
R The language selected will also be used for
the low battery alert announcement
(page 18).
Flashing
rapidly
A cellular call is being
received.
Voice announcement language
Light off
– A cellular phone is not
paired to the base unit.
– A cellular phone is not
connected to the base unit
(page 21).
You can select the language used for the
following features.
– Answering system guidance
– Talking Caller ID
– Application (App) alert announcement
– Text message (SMS) alert announcement
Bluetooth HEADSET indicator on the
base unit
The HEADSET indicator shows the Bluetooth
headset status.
Status
Meaning
On
A Bluetooth headset is
connected to the base unit.
Ready to use it.
Flashing
Flashing
rapidly
– A Bluetooth headset is in
use.
– The base unit is searching
for the paired Bluetooth
headset.
– The base unit is pairing a
headset.
A landline call is being
received.
MMENUN#112
MbN: Select the desired setting. a
MSAVEN a MOFFN
Date and time
MMENUN#101
MOKN
Enter the current month, date, and year
by selecting 2 digits for each.
Example: July 12, 2018
07 12 18
Enter the current hour and minute
(12-hour clock format) by selecting 2
digits for each.
Example: 9:30
09 30
For assistance, please visit http://shop.panasonic.com/support
17
Getting Started
*: Select “AM” or “PM”.
MSAVEN a MOFFN
Note:
R When English is selected as the display
language, 12-hour clock format is used.
When Spanish is selected, 24-hour clock
format is used.
n When the handset is in standby mode:
– If the battery is low or needs charging,
the unit plays a voice announcement at
the selected interval up to 3 times.
Note for handset:
R At the end of each call, the unit displays a
large icon for a few moments to indicate the
battery level.
Setting low battery alert
Recording your greeting
message
You can record your own greeting message
instead of using a pre-recorded greeting
message. See page 66 for details.
MMENUN#302
MbN: “Yes” a MSELECTN
To turn this feature on, select the desired
announcement interval, or select “Off” to turn
this feature off. The default setting is “Every
hour”.
MMENUN#176
MbN: Select the desired setting. a
MSAVEN a MOFFN
Record a greeting message. a MSTOPN
a MOFFN
Other settings
Dialing mode
If you cannot make calls, change this setting
according to your telephone line service. The
default setting is “Tone”.
“Tone”: For tone dial service.
“Pulse”: For rotary/pulse dial service.
MMENUN#120
MbN: Select the desired setting. a
MSAVEN a MOFFN
Low battery alert
This feature plays a voice announcement
when the battery is low or needs charging.
When this feature is turned on, the unit notifies
you as follows.
n When you end a call:
– The unit plays a voice announcement
when the battery is low or needs
charging.
18
For assistance, please visit http://shop.panasonic.com/support
Link to Cell
Link to cell feature
You can connect your base unit and cellular
phone using Bluetooth wireless technology, so
that you can make or answer cellular calls
using your phone system. This allows you to:
– use the unit to talk on cellular calls even if
some areas of your home have poor
cellular reception, simply by placing your
cellular phone in an area with good
reception.
– talk on cellular calls even if your cellular
phone is in your pocket or bag.
– enjoy cordless cellular calls even if your
cellular phone plugged in and charging.
Important:
R Your cellular phone must support the
Hands Free Profile (HFP) specification.
R You may pair 2 cellular phones and 1
Bluetooth headset.
R The unit can be used to talk on 2 lines at
the same time (for example, 2 cellular lines,
or the landline and 1 cellular line).
R Only 2 Bluetooth devices can be used with
the unit at the same time (for example, 2
cellular lines, or the Bluetooth headset and
1 cellular line*1).
R Locate your cellular phone near the base
unit. If the cellular phone is too close to the
base unit during a cellular call, you may
hear noise. For best performance, we
recommend placing the cellular phone
between 0.6 m to 3 m (2 feet to 10 feet)
away from the base unit.
*1 You cannot use a Bluetooth headset to
talk on a cellular line.
Pairing a cellular phone
Important:
R For more details and the list of compatible
cellular phones, please visit our Web site:
http://shop.panasonic.com/bluetooth-phone
R Before pairing a Bluetooth enabled cellular
phone to the base unit, make sure that no
other Bluetooth device such as a Bluetooth
headset is connected to your cellular phone.
Base unit:
Press and hold MCELL 1N or MCELL 2N
for about 5 seconds.
R After the corresponding CELL
indicator on the base unit starts
flashing, the rest of the procedure
must be completed within 5 minutes.
Your cellular phone:
While the corresponding CELL
indicator is flashing, follow the
instructions of your cellular phone to
enter the pairing mode.
R Depending on your cellular phone, it
may ask you to enter the Bluetooth
PIN (default: “0000”).
R If your cellular phone prompts you
to confirm the passkey, tap MOKN or
otherwise to accept the pairing
request.
Base unit:
Wait until a long beep sounds.
R It may take more than 10 seconds
to complete pairing.
R When the corresponding CELL
indicator lights up, the cellular
phone is connected to the base unit.
You are ready to make cellular calls.
Note:
R If the cellular phone has already paired
to the base unit, it is overwritten.
R Make sure that your cellular phone is set
to connect to this product automatically.
Refer to your cellular phone’s operating
instructions.
R Make sure you cancel your cellular
phone’s current pairing if you want to
pair it to the other line (page 19).
R The default setting for the alert feature is
“On”, so when you pair your cellular
phone to the base unit, this feature may
be activated (page 62). (This depends
on the version and type of cellular phone
you are using.)
Unpairing a cellular phone
You can cancel the pairing of a cellular phone
that is stored in the base unit.
For assistance, please visit http://shop.panasonic.com/support
19
Link to Cell
For CELL 1: MMENUN#6111
For CELL 2: MMENUN#6112
MbN: “Yes” a MSELECTN
R When the cellular phone is unpaired,
the CELL indicator is turned off.
MOFFN
Link to cell settings
Selecting which unit receives
cellular calls
You can select which unit rings and receives
calls for a cellular line. When “All” is
selected, all handsets and the base unit ring.
For CELL 1: MMENUN#6271
For CELL 2: MMENUN#6272
MbN: Select the desired handset or “All”.
a MSAVEN a MOFFN
Note:
R When you select a specific handset to
receive calls for a cellular line:
– other handsets cannot answer the calls.
– the base unit can answer the calls even
though it does not ring. However, you
can make the base unit ring by adjusting
the base unit ringer volume (page 47).
(KX-TGE670 series: page 4)
R When you change to “All” from another
setting, the base unit ringer volume also
returns to the lowest level even if the ringer
volume was changed.
R The units selected with this setting have the
alert feature (page 62) applied to them.
Ring as cell mode
Once this feature is turned on, the handset
and base unit ring using the same ringer tone
as your cellular phone.
The following settings are available:
– “Off”: Turn this feature off to use the
ringer tones of the handset and base unit.
Caller information is announced depending
on the Talking Caller ID setting (page 50).
– “On (with Talking CID)” (default):
The handset and base unit use your cellular
20
phone’s ringer tone. Caller information is
announced even if the Talking Caller ID is
turned off.
– “On (without Talking CID)”: The
handset and base unit use your cellular
phone’s ringer tone. Caller information is
not announced even if the Talking Caller ID
is turned on.
Important:
R To use this feature, your cellular phone
must support Bluetooth in-band ringtone.
Refer to your cellular phone’s operating
instructions.
For CELL 1: MMENUN#6141
For CELL 2: MMENUN#6142
MbN: Select the desired setting. a
MSAVEN a MOFFN
Note:
R The units use the preset ringer tones
instead of your cellular phone’s ringer tone
when a cellular call is being received if:
– HD voice call is being received.
– a call is being received from a caller
which is not registered in the
phonebook, allow name list or white list.
– your cellular phone is in silent mode
(depending on your cellular phone).
– the base unit is in use.
– 2 handsets are sharing a landline call.
R If your cellular phone is in silent mode with
“On (with Talking CID)” set, the unit
announces caller information even when
Talking Caller ID is turned off (page 50).
To use the handset ringer tone
instead of your cellular phone’s
ringer tone
Select “Off” in step 2, “Ring as cell mode”,
page 20.
To change the handset ringer tone for a
cellular line, see page 47.
Auto connection to the Bluetooth
devices (cellular phones)
After pairing, your Bluetooth devices are
connected to the base unit. If you move the
Bluetooth devices out of base unit range, the
For assistance, please visit http://shop.panasonic.com/support
Link to Cell
Bluetooth devices are disconnected from the
base unit. This feature allows the base unit to
try to reconnect the Bluetooth devices at
regular intervals when it returns within base
unit range. You can set the interval. The
default setting is “1 min”.
Important:
R When 3 Bluetooth devices (2 cellular
phones and 1 headset) are paired to the
base unit, only 2 Bluetooth devices can be
used with the unit at the same time, and the
base unit loses its connection from other
Bluetooth devices. To automatically resume
the connection to Bluetooth devices, leave
the auto connection on.
R Some cellular phones lose connection after
usage, please check the specifications of
your cellular phone for more details.
MMENUN#632
MbN: Select the desired setting. a
MSAVEN a MOFFN
Note:
R Some cellular phones may ask you if you
accept the connection requirement from the
base unit. In that case, select “Off” in step
2. Check the specifications of your cellular
phone.
Connecting/disconnecting the
cellular phone manually
If you will not be using the paired cellular
phone’s link to cell feature temporarily (for
example, you do not want the unit to ring
when your cellular line receives a call), you
can disconnect your cellular phone from the
base unit. If you want to use it again,
reconnect the cellular phone to the base unit.
Note:
R After you disconnect a paired cellular
phone from the base unit manually, it will
automatically be connected to the base unit
in 30 minutes. If you do not use the link to
cell feature anymore, unpair the cellular
phone (page 20).
R A disconnected cellular phone is not
unpaired from the base unit, so pairing it to
the base unit again is unnecessary.
To connect/disconnect:
For CELL 1: MMENUN#6251
For CELL 2: MMENUN#6252
R A long beep sounds.
MOFFN
Cellular line only mode (If you do
not use the landline)
If you do not use the landline, we recommend
setting the unit to the cellular line only mode.
The default setting is “Off”.
Important:
R If you turn on the “Cell line only
mode”, disconnect the telephone line cord
from the base unit. Otherwise the “Cell
line only mode” cannot be activated.
MMENUN#157
To turn on:
MbN: “On” a MSELECTN a MbN: “Yes”
a MSELECTN
To turn off:
MbN: “Off” a MSELECTN
Note:
R Once you set this mode, you can use the
following buttons to make cellular calls:
– for the handset, press M
N or MZN
instead of MCELLN (page 24).
– for the base unit, press MZN without
pressing MCELL 1N or MCELL 2N set for
the cellular line selection (page 22,
30). (KX-TGE670 series: page 4)
R Once you set this mode, the following
features cannot be used:
– Landline features (page 53)
– Answering system (page 66)
Messages cannot be received.
– Voicemail features (page 73)
R After this mode is turned on or off, the base
unit reboots.
– Bluetooth connections from cellular
phones or Bluetooth headset are
disconnected. If the auto connection is
turned on (page 20), the cellular phones
are reconnected.
–
will be displayed on the handset
momentarily. The handset can be used
is displayed.
once
For assistance, please visit http://shop.panasonic.com/support
21
Link to Cell
When you use the landline again
Before connecting the telephone line to the
base unit, select “Off” in step 2, “Cellular line
only mode (If you do not use the landline)”,
page 21.
Cellular line selection
This feature determines which cellular line is
selected to make cellular calls when:
– you press MCELLN on the handset.
N or MZN on the handset
– you press M
while the cellular line only mode is turned
on.
– you press MZN on the base unit while the
cellular line only mode is turned on.
(KX-TGE670 series: page 4)
The following settings are available:
– “Manual” (handset only: default): You can
select the desired cellular line when making
a call.
– “Cellphone 1”*1 (base unit default):
CELL 1 is selected.
– “Cellphone 2”*1: CELL 2 is selected.
For handset: MMENUN#634
For base unit*2: MMENUN#*634
MbN: Select the desired setting. a
MSAVEN a MOFFN
After the Bluetooth device is paired, the
device name is displayed.
KX-TGE670 series: page 4
*1
*2
Storing your area code (for
dialing only a 7-digit phone
number to make a local call)
You need to add your area code when making
cellular calls to a phone number in your area.
Once you store your area code, it is
automatically added to the beginning of the
7-digit phone number when making cellular
calls.
MMENUN#633
MSAVEN a MOFFN
22
Enter the 3-digit area code.
R To correct a digit, press MCLEARN.
Changing the Bluetooth PIN
(Personal Identification Number)
The PIN is used to pair cellular phones to the
base unit. The default PIN is “0000”. To
prevent unauthorized access to this product,
we recommend that you change the PIN, and
keep it confidential.
Important:
R Please make note of your new PIN. The
unit does not reveal the PIN to you. If you
forget your PIN, see page 86.
MMENUN#619
R If the unit prompts you to enter the old
PIN (when the default has been
changed), enter the current 4-digit PIN.
Enter the new 4-digit PIN. a MOKN
Enter the new 4-digit PIN again. a
MSAVEN a MOFFN
HD voice
HD voice feature enhances sound quality to
achieve high definition voice quality during
calls. You can use this feature to improve the
communication quality effortlessly.
HD voice is available when:
– using the handset to make or answer a call
via cellular line.
Important:
R In order to make an HD voice call using the
cellular line, it is necessary for the cellular
phone to support HD voice. Please refer to
the operating instructions of your cellular
phone.
Activating HD voice
MMENUN#601
MbN: Select the desired setting. a
MSAVEN a MOFFN
Note:
R The HD voice feature will be deactivated
automatically in the following situations.
– using the base unit to make or answer a
call via cellular line*1
For assistance, please visit http://shop.panasonic.com/support
Link to Cell
–
–
–
–
making a call via landline
making intercom call
using voice paging
playing message recorded on the
answering system
R When HD voice is activated:
– the units use the preset ringer tones
instead of your cellular phone’s ringer
tone when a cellular call is being
received even if you turned Ring as cell
mode feature on (page 20).
– conference menu will be unavailable
during both handset and base unit*1
cellular calls (page 27, 32).
– during a cellular call, if another incoming
call from landline is received, the
answering system function will not be
available even if it is turned on and
incoming call state is continued.
*1 KX-TGE670 series: page 4
For assistance, please visit http://shop.panasonic.com/support
23
Making/Answering Calls Using the Handset
Making cellular calls
Making a cellular call using the redial
list
Important:
R The unit can be used to talk on 2 lines at
the same time (for example, 2 cellular lines,
or the landline and 1 cellular line).
R Only 2 Bluetooth devices can be used with
the unit at the same time (for example, 2
cellular lines, or the headset and 1 cellular
line*1).
R Before making calls, confirm that the
corresponding
on the handset is
displayed (page 16).
*1 You cannot use a Bluetooth headset to
talk on a cellular line.
The last 5 phone numbers dialed are stored in
the redial list (48 digits max. each).
Lift the handset and then dial the phone
number.
R To correct a digit, press MCLEARN.
Erasing a number in the redial list
MCELLN
R The unit starts dialing immediately in
the following situations.
– Only 1 cellular phone is paired.
– A specific line is set to make cellular
calls (page 22).
Go to step 4.
MbN: Select the desired cellular phone. a
MSELECTN
When you finish talking, press MOFFN or
place the handset on the base unit or
charger.
Note:
R To switch to the speaker, press MZN.
To switch back to the receiver, press MZN/
N.
R In step 1, you can store the dialed phone
number to the phonebook by pressing and
holding MFN W for a few seconds.
Adjusting the receiver or speaker
volume
Press MjN or MkN repeatedly while talking.
Note:
R The receiver or speaker volume you set is
kept for each line (landline and cellular
lines).
24
MEN REDIAL
MbN: Select the desired cellular phone. a
MSELECTN
MbN: Select the desired entry.
MCELLN
R The unit starts dialing immediately in
the following situations.
– Only 1 cellular phone is paired.
– A specific line is set to make cellular
calls (page 22).
n When a cellular phone is paired:
1 MEN REDIAL
MbN: Select the desired entry. a
MMENUN
MbN: “Erase” a MSELECTN
MbN: “Yes” a MSELECTN
MOFFN
n When a cellular phone is not paired:
1 MEN REDIAL
MbN: Select the desired entry. a
MERASEN
MbN: “Yes” a MSELECTN a MOFFN
Making landline calls
Lift the handset and then dial the phone
number.
R To correct a digit, press MCLEARN.
Press M
N to make the call.
R To make the call using the
speakerphone, press MZN.
When you finish talking, press MOFFN or
place the handset on the base unit or
charger.
Note:
R To switch to the speaker, press MZN.
For assistance, please visit http://shop.panasonic.com/support
Making/Answering Calls Using the Handset
To switch back to the receiver, press MZN/
N.
R In step 1, you can store the dialed phone
number to the phonebook by pressing and
holding MFN W for a few seconds.
Making a call using the redial list
The last 5 phone numbers dialed are stored in
the redial list (48 digits max. each).
MEN REDIAL
MbN: Select the desired entry.
Pause (for PBX/long distance service
users)
A pause is sometimes required when making
calls using a PBX or long distance service.
When storing a calling card access number
and/or PIN in the phonebook, a pause is also
needed (page 43).
Example: If you need to dial the line access
number “9” when making outside calls with a
PBX:
9 a MDN (Pause)
Dial the phone number. a M
Note:
R A 3.5 second pause is inserted each time
MDN (Pause) is pressed.
Answering calls
When a call is being received, the ringer
indicator flashes rapidly.
N or
Lift the handset and then press M
MZN when the unit rings.
R To answer a cellular call, you can also
press MCELLN.
When you finish talking, press MOFFN or
place the handset on the base unit or
charger.
Any key answer: You can answer the call by
pressing any dial key.
Auto talk: You can answer calls simply by
lifting the handset (page 51).
Temporary handset ringer off: You can turn
the ringer off temporarily by pressing M N.
Adjusting the handset ringer volume
n While the handset is ringing for an
incoming call:
Press MjN or MkN repeatedly to select the
desired volume.
n While the handset is in standby mode:
Press MjN or MkN repeatedly to select the
desired volume for landline call.
R To turn the ringer off, press MkN repeatedly.
Note:
R You can adjust the ringer volume for
cellular call and landline call by
programming (page 47, 49).
R The ringer volume you set is kept for each
line (landline and cellular lines).
One-touch ringer off for the handset
Press and hold 0 ( ) until the unit beeps to
turn the ringer off. While the ringer is turned
off, the handset will not ring for calls.
R You can turn the ringer on again by:
– pressing and holding 0 ( ) until the
unit beeps
– changing the volume using navigator key
MDN (Vol.)
– pressing MjN repeatedly
Useful features during a
call
Hold
Press MMENUN during an outside call.
MbN: “Hold” a MSELECTN
To release hold on the cellular line:
Press MCELLN.*1
R Another handset user can take the call
by pressing MCELLN.*1
*1 If you press MCELLN and the
selection list is displayed, select
the desired cellular line and press
MSELECTN.
For assistance, please visit http://shop.panasonic.com/support
25
Making/Answering Calls Using the Handset
R The base unit user can take the call by
pressing MCELL 1N or MCELL 2N.
(KX-TGE670 series: page 4)
To release hold on the landline:
Press M
N.
R Another handset user can take the call
by pressing M
N.
R The base unit user can take the call by
pressing MZN. (KX-TGE670 series:
page 4)
Note:
R After holding for 10 minutes, the call is
disconnected.
To switch between calls, press MFLASHN.
Note:
R Please contact your phone service provider
for details and availability of this service in
your area.
Temporary tone dialing for
landline calls (for rotary/pulse
service users)
Press * before entering access numbers
which require tone dialing.
Mute
Handset equalizer
This feature clarifies the voice of the person
you are talking to, producing a more
natural-sounding voice that is easier to hear
and understand.
Press MMUTEN during a call.
To return to the call, press MMUTEN.
Note:
R MMUTEN is a soft key visible on the display
during a call.
Flash for landline calls
MFLASHN allows you to use the special
features of your host PBX such as transferring
an extension call, or accessing optional
telephone services.
Note:
R To change the flash time, see page 52.
For call waiting or Call Waiting
Caller ID service users
To use call waiting or Call Waiting Caller ID,
you must first subscribe with your phone
service provider.
This feature allows you to receive calls while
you are already talking on the phone. If you
receive a call while on the phone, you will hear
a call waiting tone.
If you subscribe to both Caller ID and Call
Waiting with Caller ID services, the 2nd
caller’s information is displayed on the unit
that is in use after you hear the call waiting
tone.
26
Press MFLASHN to answer the 2nd call.
Press MMENUN while talking.
MbN: “Equalizer” a MSELECTN
MbN: Select the desired setting.
Press MOKN to exit.
Note:
R The setting you made is kept for each line
(landline and cellular lines).
R Depending on the condition and quality of
your telephone line, this feature may
emphasize existing line noise. If it becomes
difficult to hear, turn this feature off.
R This feature is not available while using the
speakerphone.
Call share
You can join an existing outside call.
n While another unit is on a cellular call:
1 To join the conversation, press
MCELLN.
R You can join the conversation in the
following situations.
– Only 1 cellular phone is paired.
– A specific line is set to make
cellular calls (page 22).
MbN: Select the corresponding cellular
phone. a MSELECTN
For assistance, please visit http://shop.panasonic.com/support
Making/Answering Calls Using the Handset
n While another unit is on a landline call:
N.
To join the conversation, press M
Note:
R A maximum of 3 parties (including 1 outside
party) can join a conversation using 2
extensions. (3-way conference)
R To prevent other users from joining your
conversations with outside callers, turn call
sharing mode off (page 52).
Transferring calls, conference
calls
Outside calls can be transferred or a
conference call with an outside party can be
made:
– between handsets
– between a handset and the base unit*1
*1 KX-TGE670 series: page 4
During an outside call, press MMENUN.
Wait for the paged party to answer.
R If the paged party does not answer,
press MBACKN to return to the outside
call.
MbN: “Intercom” a MSELECTN
MbN: Select the desired unit. a MSELECTN
R If you select “Voice paging”, the
call will be switched from the
ear-receiver mode to the
speakerphone mode.
To complete the transfer:
Press MOFFN.
To establish a conference call:
MMENUN a MbN: “Conference” a
MSELECTN
R To leave the conference, press MOFFN.
The other 2 parties can continue the
conversation.
R To put the outside call on hold:
MMENUN a MbN: “Hold” a
MSELECTN
To resume the conference: MMENUN
a MbN: “Conference” a MSELECTN
R To cancel the conference: MMENUN a
MbN: “Stop conference” a
MSELECTN
You can continue the conversation
with the outside caller.
Note:
R In step 3, you can also use M
N or MZN
after selecting the unit.
R When HD voice is activated (page 22),
conference menu will be unavailable during
cellular calls.
Transferring a cellular call
between the handset and a
cellular phone
Transferring a cellular call from the
handset to a cellular phone
Press MMENUN during a cellular call.
MbN: “Transfer to cell” a
MSELECTN
R The cellular call is transferred to the
cellular phone.
Note:
R Depending on your cellular phone type, you
may need to set the cellular phone to be
ready to talk before transferring. For
example, if your cellular phone has a top
cover, open it beforehand.
Transferring a cellular call from a
cellular phone to the handset
During a conversation using a cellular phone,
the call cannot be transferred to the handset
by the cellular phone. Perform the following
with the handset.
During a conversation using a cellular
phone, press MCELLN.
R The call is transferred to the handset in
the following situations.
– Only 1 cellular phone is paired.
– A specific line is set to make cellular
calls (page 22).
MbN: Select the corresponding cellular
phone. a MSELECTN
R The call is transferred to the handset.
Answering a 2nd call
If you receive a call while talking on the phone,
the interrupt tone sounds (page 49) and the
For assistance, please visit http://shop.panasonic.com/support
27
Making/Answering Calls Using the Handset
2nd caller’s information is displayed if you
subscribe to Caller ID service (page 58).
Answering a 2nd call during a
landline call
Press MMENUN during a landline call.
To hang up the 2nd call and return to the
1st call (landline call), press MOFFN, then
press M
N.
MbN: “Hold” a MSELECTN
To answer the 2nd call:
Press MCELLN while the 2nd call is being
received.
Answering a 2nd call during a cellular
call
*1
Press MMENUN during a cellular call.
MbN: “Hold” a MSELECTN
To answer the 2nd call:
N or MCELLN while the 2nd call
Press M
is being received.
To hang up the 2nd call and return to the
1st call (cellular call), press MOFFN, then
press MCELLN.*1
If you press MCELLN and the selection list
is displayed, select the desired cellular
line and press MSELECTN.
Power backup operation
for landline
When a power failure occurs, the charged
handset temporarily supplies power to the
base unit (power backup mode). This allows
you to make and receive landline calls using a
handset during a power failure. The base unit
will not perform any other functions. However,
some functions such as Caller ID and
phonebook are available only when using a
handset other than the handset supplying
power to the base unit. You can program
“Power failure” and the default setting is
“Auto” (page 52).
28
Important:
R If a handset is not placed on the base unit
when a power failure occurs, “Power
outage Press OFF” is displayed. After
pressing MOFFN on the handset, place it on
the base unit to start power backup mode.
R Power backup mode will not work if the
battery level of the power supplying
handset is
or .
R Do not lift the power supplying handset
from the base unit during power backup
mode.
Ni-MH battery performance (supplied
batteries) during power backup mode
When the batteries are fully charged,
operating time of the handset in power backup
mode varies depending on usage.
– Continuous use of the handset in power
backup mode: 1.5 hours max.
– Continuous use of the handset other than a
handset in power backup mode: 2 hours
max.
– Not in use in power backup mode: 2 hours
max.
Making calls during a power
failure
n When only 1 handset is registered:
1 Lift the handset and dial the phone
number.
Within 1 minute, place the handset on
the base unit.
R Wait until speakerphone is turned
on automatically and the call is
made.
When the other party answers the call,
keep the handset on the base unit and
talk using the speakerphone.
When you finish talking, press MOFFN.
n When 2 or more handsets are registered:
You should leave one handset on the base
unit for supplying the power, and use
another handset for making calls.
For assistance, please visit http://shop.panasonic.com/support
Making/Answering Calls Using the Handset
Note:
R The range of the base unit is limited during
a power failure. Please use the handset
close to the base unit.
Note:
R The range of the base unit is limited during
a power failure. Please use the handset
close to the base unit.
Making a call using the redial list
n When only 1 handset is registered:
1 Lift the handset.
MEN REDIAL
MbN: Select the desired entry.
Within 1 minute, place the handset on
the base unit.
R Wait until speakerphone is turned
on automatically and the call is
made.
n When 2 or more handsets are registered:
You should leave one handset on the base
unit for supplying the power, and use
another handset for making calls.
Making a call using the phonebook
There must be at least 2 handsets
registered to the base unit in order for the
phonebook feature to be used during a
power failure.
You should leave one handset on the base
unit for supplying the power, and use another
handset for making calls.
Answering calls during a power
failure
n When only 1 handset is registered:
1 When the unit rings, keep the handset
N or
on the base unit and press M
MZN.
R Speakerphone is turned on.
When you finish talking, press MOFFN.
n When 2 or more handsets are registered:
When the unit rings, use a handset which is
not supplying power to the base unit.
R Do not use or lift the handset which is
placed on the base unit during power
backup mode.
For assistance, please visit http://shop.panasonic.com/support
29
Making/Answering Calls Using the Base Unit
Making cellular calls
Available for:
KX-TGE670 series (page 4)
Important:
R The unit can be used to talk on 2 lines at
the same time (for example, 2 cellular lines,
or the landline and 1 cellular line).
R Only 2 Bluetooth devices can be used with
the unit at the same time (for example, 2
cellular lines, or the headset and 1 cellular
line).
R Before making calls, confirm that the
corresponding CELL indicator on the base
unit lights up (page 17).
Press MCELL 1N or MCELL 2N.
When you finish talking, press MZN.
Dial the phone number.
When the other party answers, speak into
the microphone.
Note:
R While on a call, you can switch from the
base unit to the handset:
– With the call sharing mode on
(page 52), press MCELLN*1 on the
handset. a MbN: Select the desired
cellular phone. a MSELECTN a Press
MZN on the base unit.
– If the handset is on the base unit, simply
lift it.
*1 The call is taken when:
– only 1 cellular phone is paired.
– a specific line is set to make cellular
calls (page 22).
Adjusting the speaker volume
Press MjN or MkN repeatedly while talking.
Note:
R The speaker volume you set is kept for
each line (landline and cellular lines).
MREDIALN
Making landline calls
MZN
When you finish talking, press MZN.
Dial the phone number.
When the other party answers, speak into
the microphone.
Note:
R While on a call, you can switch from the
base unit to the handset:
– Press M
N on the handset, then press
MZN on the base unit with the call
sharing mode on (page 52).
– If the handset is on the base unit, simply
lift it.
Redialing the last number dialed
MZN a MREDIALN
Pause (for PBX/long distance service
users)
A pause is sometimes required when making
calls using a PBX or long distance service.
When storing a calling card access number
and/or PIN in the phonebook, a pause is also
needed (page 43).
Example: If you need to dial the line access
number “9” when making outside calls with a
PBX:
MZN
9 a MPAUSEN
Dial the phone number.
Note:
R A 3.5 second pause is inserted each time
MPAUSEN is pressed.
Redialing the last number dialed
Answering calls
When a landline call is being received, the
SP-PHONE indicator flashes rapidly.
30
Press MCELL 1N or MCELL 2N.
For assistance, please visit http://shop.panasonic.com/support
Making/Answering Calls Using the Base Unit
When a cellular call is being received, the
CELL indicator and SP-PHONE indicator flash
rapidly.
Press MZN when the unit rings.
R You can also answer the cellular call
by pressing MCELL 1N or MCELL 2N.
Speak into the microphone.
R A handset user can take the call by
N.
pressing M
Note:
R While a landline call is on hold, the
SP-PHONE indicator flashes.
R After holding for 10 minutes, the call is
disconnected.
When you finish talking, press MZN.
Mute
Adjusting the base unit ringer volume
n While the base unit is ringing for an
incoming call:
Press MjN or MkN repeatedly to select the
desired volume.
n While the base unit is in standby mode:
Press MjN or MkN repeatedly to select the
desired volume for landline call.
R To turn the ringer off, press and hold MkN
until the unit beeps.
Note:
R You can adjust the ringer volume for
cellular call and landline call by
programming (page 47, 49).
R The ringer volume you set is kept for each
line (landline and cellular lines).
Useful features during a
call
Hold
Press MHOLDN during an outside call.
To release hold on the cellular line:
Press MCELL 1N or MCELL 2N.
R A handset user can take the call:
MCELLN*1 a MbN: Select the
corresponding cellular phone. a
MSELECTN
*1 The call is taken in the following
situations.
– Only 1 cellular phone is paired.
– A specific line is set to make
cellular calls (page 22).
To release hold on the landline:
Press MZN.
Press MMUTEN during a call.
R The SP-PHONE indicator flashes.
To return to the call, press MMUTEN.
Flash for landline calls
MFLASHN allows you to use the special
features of your host PBX such as transferring
an extension call, or accessing optional
telephone services.
Note:
R To change the flash time, see page 52.
For call waiting service users
To use call waiting, you must first subscribe
with your phone service provider.
This feature allows you to receive calls while
you are already talking on the phone. If you
receive a call while on the phone, you will hear
a call waiting tone.
Press MCALL WAITN to answer the 2nd
call.
To switch between calls, press MCALL
WAITN.
Note:
R Please contact your phone service provider
for details and availability of this service in
your area.
Temporary tone dialing for
landline calls (for rotary/pulse
service users)
Press * before entering access numbers
which require tone dialing.
For assistance, please visit http://shop.panasonic.com/support
31
Making/Answering Calls Using the Base Unit
Call share
You can join an existing outside call.
To select the line that is being used for the call:
– for a cellular line press MCELL 1N or MCELL
2N.
– for the landline press MZN.
Note:
R A maximum of 3 parties (including 1 outside
party) can join a conversation using 2
extensions. (3-way conference)
R To prevent other users from joining your
conversations with outside callers, turn call
sharing mode off (page 52).
Transferring calls, conference
calls
Outside calls can be transferred or a
conference call with an outside party can be
made between a handset and the base unit.
During an outside call, press
MINTERCOMN.
When 2 or more handsets are
registered:
– To page a specific handset, enter the
handset number.
– To page all handsets, press 0 or wait
for a few seconds.
Wait for the paged party to answer.
R If paged party does not answer, press
MINTERCOMN to return to the outside
call.
To complete the transfer:
Press MZN.
R The outside call is being routed to the
handset.
To establish a conference call:
Press MCONFN.
R To leave the conference, press MZN.
The other 2 parties can continue the
conversation.
R To put the outside call on hold, press
MHOLDN. To resume the conference,
press MCONFN.
Note:
R When HD voice is activated (page 22),
conference function will be unavailable
during cellular calls.
32
Transferring a cellular call
between the base unit and a
cellular phone
Transferring a cellular call from the
base unit to a cellular phone
During a cellular call, press and hold MCELL
1N or MCELL 2N until the SP-PHONE indicator
goes out.
R The cellular call is transferred to the cellular
phone.
Transferring a cellular call from a
cellular phone to the base unit
During a conversation using a cellular phone,
press MCELL 1N or MCELL 2N.
R The cellular call is transferred to the base
unit.
Answering a 2nd call
If you receive a call while talking on the phone,
the interrupt tone sounds (page 49).
Answering a 2nd call during a
landline call
Press MHOLDN during a landline call.
To hang up the 2nd call and return to the
1st call (landline call), press MZN 2 times.
To answer the 2nd call:
Press MCELL 1N or MCELL 2N.
Answering a 2nd call during a cellular
call
Press MHOLDN during a cellular call.
To hang up the 2nd call and return to the
1st call (cellular call), press MZN, then
press MCELL 1N or MCELL 2N.
To answer the 2nd call:
MZN, MCELL 1N, or MCELL 2N
For assistance, please visit http://shop.panasonic.com/support
Locator/Intercom
Handset locator
You can locate a misplaced handset by
paging it.
Base unit: Press MLOCATORN or
MHANDSET LOCATORN.
R All registered handsets beep for 1
minute.
To stop paging:
Base unit:
Press MLOCATORN or MHANDSET
LOCATORN.
Handset:
n KX-TGE660 series: page 4
Press MOFFN.
n KX-TGE670 series: page 4
N, then press MOFFN.
Press M
Cell locator
Available for:
KX-TGE660 series (page 4)
This feature allows you to locate a misplaced
cellular phone by pressing the MLOCATES
CELLN button on the base unit and calling
your cellular phone. You must assign your
cellular phone’s phone number to the button
beforehand. Only 1 cellular phone number (24
digits max.) can be assigned.
Adding a phone number
MMENUN#248
R If you have already stored a cellular
phone number, the current number is
displayed.
Enter your cellular phone number. a
MSAVEN a MOFFN
Erasing the number
MMENUN#248
Press and hold MCLEARN until all digits
are erased. a MSAVEN a MOFFN
Calling the misplaced cellular phone
Base unit: MLOCATES CELLN
R To stop calling, press MLOCATES CELLN again.
Important:
R While the base unit is calling the cellular phone,
the outside line is used.
– Even if the cellular phone answers, you
cannot talk with the cellular phone and the
base unit beeps for 1 minute. To end the call,
press MLOCATES CELLN on the base unit.
Charges may be incurred if the cellular phone
answers the call.
Intercom
Intercom calls can be made:
– between handsets
– between a handset and the base unit*1
*1 KX-TGE670 series: page 4
Note:
R When paging unit(s), the paged unit(s)
beeps for 1 minute.
R If you receive an outside call while talking
on the intercom, the interrupt tone sounds
(page 49).
– Handset: To finish intercom, press
MOFFN. To answer the call, press M
or MCELLN.
– Base unit: To finish intercom, press
MZN. To answer the call, press MZN
again or the corresponding cellular line
key (MCELL 1N or MCELL 2N).
R To change the handset ringer volume and
ringer tone for intercom, see page 49.
Making an intercom call
Handset
MMENUN a MbN: “Intercom” a
MSELECTN
MbN: Select the desired unit or “Voice
paging”. a MSELECTN
R If you select “Voice paging”, speak
into the microphone after the beep.
Your voice will be heard using the
speakers of the base unit*1 and all
For assistance, please visit http://shop.panasonic.com/support
33
Locator/Intercom
handsets, until a paged party answers
your page or until you press MOFFN.
After the other party answers, the
speakerphone mode is turned on.
*1
When you finish talking, press MOFFN.
KX-TGE670 series: page 4
Note:
R You can also use the MINTERCOMN soft
key, if displayed, to make intercom calls.
R You cannot use voice paging if other units
are in use.
R Voice paging is not available when a range
extender (KX-TGA407) is registered to the
base unit.
baby monitor calls automatically. The default
setting is “Off”.
For handset setting: MMENUN#273
For base unit setting (using a
handset)*1: MMENUN#*273
MbN: Select the desired setting. a
MSAVEN a MOFFN
KX-TGE670 series: page 4
*1
Note:
R This feature is not available for all handsets
paging and voice paging even if it is turned
on.
Base unit*1
*1
KX-TGE670 series: page 4
Press MINTERCOMN.
When 2 or more handsets are
registered:
– To page a specific handset, enter the
handset number.
– To page all handsets, press 0 or wait
for a few seconds.
When you finish talking, press MZN.
Answering an intercom call
Handset
Press M
N to answer the page.
When you finish talking, press MOFFN.
Base unit*1
*1
KX-TGE670 series: page 4
Press MZN to answer the page.
When you finish talking, press MZN.
Turning auto intercom on/off
This feature allows the handset or base unit to
answer intercom calls automatically when it is
N or
called. You do not need to press M
MZN. When this feature is set to “On”, the
monitoring handset or base unit for the baby
monitor feature (page 56) will also answer
34
For assistance, please visit http://shop.panasonic.com/support
Call Block
Call block
You can press the MCALL BLOCKN button in
the following situations to disconnect the
current call and add a phone number to the
call block list:
– when an incoming call is being received
– when an incoming call is being recorded by
the answering system
– when talking on an outside call
Once a phone number has been added to the
call block list, the unit will block calls from that
phone number in the future.
Press MCALL BLOCKN under the
situations shown above.
Confirm the call block number and press
MYESN.
R The call block number is stored in the
call block list, “Caller blocked” is
displayed, and then the call is
disconnected.
Note:
R If the call has no phone number, the call is
blocked but it is not stored in the call block
list.
R The call block feature is not available:
– for intercom calls or calls received by call
waiting.
– when a landline call (or cellular call) is
being received during a cellular call (or
landline call).
R Blocked calls are logged in the caller list.
Storing unwanted callers
The unit can block calls by storing the desired
items in the call block list beforehand (Caller
ID subscribers only).
– “Block a single number”: The unit
blocks calls from specific phone numbers
stored in the call block list.
– “Block range of numbers”: The unit
blocks calls that begin with a number stored
in the call block list, such as a toll-free
phone number prefix or certain area codes.
– “Block unknown CID”: The unit blocks
calls that have no phone number.
Single phone numbers and ranges of numbers
can be stored in the call block list up to 1000
items in total.
Blocking unwanted callers:
When a call is received, the unit rings once*1
while caller information is being received.
If the caller’s phone number matches an entry
in the call block list, the unit emits no sound to
the caller, and disconnects the call.
*1 If you do not want this one ring to sound,
select “No” in “Turning the first ring on/
off” (page 36).
Storing a single phone number
Important:
R We recommend storing 10 digits (including
the area code). If only 7 digits are stored, all
numbers that have the same last 7 digits
will be blocked.
Adding call blocked numbers from
the caller list
n When a cellular phone is paired:
1 MCN CID
MbN: Select the desired entry to be
blocked.
R To edit the number:
MSELECTN a Press * (Edit)
repeatedly until the phone number
is shown in the 10-digit format. a
MSAVEN a MbN: “Call block”
a MSELECTN a Go to step 4.
MCALL BLOCKN
MbN: “Yes” a MSELECTN
Edit the phone number if necessary
(24 digits max.). a MSAVEN a MOFFN
n When a cellular phone is not paired:
1 MCN CID
MbN: Select the desired entry to be
blocked.
R To edit the number: MMENUN a
MbN: “Edit” a MSELECTN
Press MEDITN repeatedly until the
phone number is shown in the
10-digit format. a MSAVEN a MbN:
For assistance, please visit http://shop.panasonic.com/support
35
Call Block
“Call block” a MSELECTN a
Go to step 4.
MCALL BLOCKN
MbN: “Yes” a MSELECTN
Edit the phone number if necessary
(24 digits max.). a MSAVEN a MOFFN
“No”: The first ring is muted for all calls. If this
setting is selected, the unit will never ring for
calls from blocked phone numbers.
MCALL BLOCKN
MbN: Select the desired setting. a
MSAVEN a MOFFN
Adding call blocked numbers
manually
MCALL BLOCKN
MMENUN a MbN: “Add” a MSELECTN
MbN: “Block a single number” a
MSELECTN
MCALL BLOCKN
MbN: “Block range of numbers” a
MSELECTN
MMENUN a MbN: “Add” a MSELECTN
Enter the desired number (2-8 digits). a
MSAVEN a MOFFN
Blocking incoming calls that
have no phone number
You can block calls when no phone number is
provided, such as private callers or out of area
calls.
MCALL BLOCKN
MbN: Select the desired setting. a
MSAVEN a MOFFN
MbN: “Block unknown CID” a
MSELECTN
Turning the first ring on/off
You can choose whether the first ring sounds
when a call is received.
“Yes” (default): The first ring for all calls will
be heard, including calls from blocked phone
numbers.
36
Viewing/editing/erasing call
block numbers
MCALL BLOCKN
MbN: Select the desired entry.
R After viewing, press MOFFN to exit.
Enter the phone number (24 digits max.).
a MSAVEN a MOFFN
Storing a range of number
MbN: “One ring for blocked call”
a MSELECTN
MbN: “Block a single number” or
“Block range of numbers” a
MSELECTN
To edit a number:
MEDITN a Edit the number. a MSAVEN
a MOFFN
To erase a number:
MERASEN a MbN: “Yes” a MSELECTN
a MOFFN
Note:
R When editing, press the desired dial key to
add digits and press MCLEARN to erase
digits.
Erasing all call block numbers
MCALL BLOCKN
MMENUN a MbN: “Erase all” a
MSELECTN
MbN: “Block a single number” or
“Block range of numbers” a
MSELECTN
MbN: “Yes” a MSELECTN
MbN: “Yes” a MSELECTN a MOFFN
Displaying and clearing blocked
call counts
Total number of blocked calls (up to 65,000)
will be displayed.
For assistance, please visit http://shop.panasonic.com/support
Call Block
MMENUN#177
R To exit, press MOFFN.
MCLEARN
MbN: “Yes” a MSELECTN a MOFFN
For assistance, please visit http://shop.panasonic.com/support
37
Automated callers block
Automated callers block
In automated callers block function, the unit
will screen the incoming calls before ringing
for allowed calls or end the calls without
ringing when the call is identified as robocalls,
telemarketing calls or other undesirable
calls.The unit will play the automated callers
block greeting message and prompt the caller
to enter an access code in order for the unit to
identify whether the call is automated callers
or not.
You can set the unit to block or unblock mode.
The default setting is “Unblock”.
Note:
R The unit connects the call without
prompting to enter access code in the
following situation:
– the caller's phone number matches an
entry in the phonebook (page 41).
– the caller's name matches an entry in
the allow name list (page 38).
– the caller's phone number is memorized
as the white list (page 38).
R If the number is stored in the call block list
(page 35), the unit disconnect the call
without playing automated callers block
greeting message.
R The automated callers block feature is not
available:
– when a landline call (or cellular call) is
being received during a cellular call (or
landline call).
– during power backup operation
(page 28).
R When the answering system answers a call
from a caller which is not registered in the
phonebook, allow name list or white list, the
following operation will be delayed:
– answering a call
– remote turn on
– toll saver
R When the unit receives a call from a caller
which is not registered in the phonebook,
allow name list or white list in the following
situation, the unit shifts to standby mode:
– when searching the phonebook, caller
list, redial list, call block list, or allow
name list
– when programming
38
– when using the answering system
– when paging all handsets or base unit
R Blocked calls are logged in the caller list.
We recommend you to check the caller list
periodically. If neccessary, register the
entry to the phonebook or allow name list to
connect the call next time.
White list
Once the caller enters the access code, the
caller's phone number is memorized in the
white list as unblocked number. White list
callers are allowed to connect without access
code during their next call. 100 items can be
stored to the white list (22 digits max. each).
Note:
R When the white list memory is full, the
latest call received will replace the old
number stored in the list.
R White list will be erased when you change
the access code (page 39).
R White lists will not be displayed to you.
Setting the automated callers
block
MMENUN#787
MbN: Select the desired setting. a
MSAVEN a MOFFN
Storing allow name list
You can allow certain caller to pass through
by storing the caller's name to the allow name
list even if you only know the caller names but
not their numbers.You can store up to 100
names (16 characters max.). If the name
stored in the allow name list matches the
incoming Caller ID, the unit rings. Callers
listed in the allow name list is not required to
enter the access code.
Adding allow name list from the caller
list
n When a cellular phone is paired:
1 MCN CID
For assistance, please visit http://shop.panasonic.com/support
Automated callers block
MbN: Select the desired entry. a
MSELECTN
MSAVEN
MbN: “Allow name” a MSELECTN
MMENUN#789
MCLEARN
Enter the new access code. a MSAVEN
a MOFFN
n When a cellular phone is not paired:
1 MCN CID
MbN: Select the desired entry. a
MMENUN
MbN: “Save allow name” a
MSELECTN
Viewing/erasing allow name list
MMENUN#794
MERASEN a MbN: “Yes” a MSELECTN
a MOFFN
MbN: Select the desired entry.
R After viewing, press MOFFN to exit.
Erasing all allow name list
MMENUN#794
MERASEN a MbN: “Yes” a MSELECTN
MbN: “Yes” a MSELECTN a MOFFN
Displaying and clearing
blocked call counts
Total number of blocked calls (up to 65,000)
will be displayed.
MMENUN#790
R To exit, press MOFFN.
MCLEARN
Automated callers block
greeting message
When the unit answers a call, a greeting
message is played to callers.
You can use either:
– your own automated callers block greeting
message
– an automated callers block pre-recorded
greeting message
Recording automated callers
block greeting message
Important:
R Make sure that you recorded the access
code in the greeting message.
MMENUN#791
MOKN a Check your access code.
After a beep sounds, hold the handset
about 20 cm (8 inches) away and speak
clearly into the microphone (2 minutes
max.).
Press MSTOPN to stop recording.
The unit will play the recorded automated
callers block greeting message. a
MYESN a MOFFN
MbN: “Yes” a MSELECTN a MOFFN
Resetting to automated callers
block pre-recorded greeting
message
Changing the access code
This procedure will erase your automated
callers block greeting message and use the
pre-recorded one.
If the unit answers the undesirable calls such
robocall even though the automated callers
block function is on, change the access code
(3 digits max.). The default setting is “1”.
MMENUN#793
MYESN a MOFFN
For assistance, please visit http://shop.panasonic.com/support
39
Automated callers block
Playing back the automated
callers block greeting message
40
MMENUN#792
To exit, press MOFFN.
For assistance, please visit http://shop.panasonic.com/support
Phonebook
Key
Operation
Phonebook
MFN MEN
Move the cursor
You can add 3,000 names (16 characters
max.) and phone numbers (24 digits max.) to
the phonebook, and assign each phonebook
entry to the desired group (page 42). The
following groups are available:
– Group 1: “Home”*1 (default)
– Group 2: “Cell 1”*1
– Group 3: “Cell 2”*1
– Group 4-9: You can change the group
name for each group.
*1 For groups 1-3, the group names cannot
be changed.
MCLEARN
Erase the character or number
R To erase all, press and
hold it.
Important:
R All entries can be shared by any registered
handset.
R You can copy phonebook entries from a
Bluetooth cellular phone to the unit’s
phonebook (page 60).
Adding phonebook entries
MFN W a MMENUN
MbN: “Add new entry” a MSELECTN
Enter the party’s name. a MOKN
Enter the party’s phone number. a MOKN
MbN: Select the desired group. a
MSELECTN 2 times a MOFFN
Note:
R In step 3, you can switch the language for
entering characters.
# a MbN: Select the desired language. a
MOKN
Entering characters
Press the dial key that corresponds to the
desired character. Press repeatedly to scroll
through the available characters.
The following operations are also available.
Key
Operation
Switch between the
uppercase and lowercase
(A « a)
R To enter another character that is located
on the same dial key, first press MEN to
move the cursor to the next space.
R If you do not press any dial key within 2
seconds after entering a character, the
character is fixed and the cursor moves to
the next space.
Storing a redial list number to the
phonebook
Phone numbers of up to 24 digits can be
stored in the phonebook.
n When a cellular phone is paired:
1 MEN REDIAL
MbN: Select the desired entry. a
MMENUN
MbN: “Save” a MSELECTN
To store the name, continue from step
3, “Editing entries”, page 43.
n When a cellular phone is not paired:
1 MEN REDIAL
MbN: Select the desired entry. a
MSAVEN
To store the name, continue from step
3, “Editing entries”, page 43.
Note:
R The name stored in the phonebook will be
reflected in the redial list after you make a
call using that phonebook entry.
Storing caller information to the
phonebook
n When a cellular phone is paired:
1 MCN CID
MbN: Select the desired entry. a
MSELECTN
R To edit the number, press * (Edit)
repeatedly until the phone number
is shown in the desired format.
For assistance, please visit http://shop.panasonic.com/support
41
Phonebook
MSAVEN
Continue from step 3, “Editing entries”,
page 43.
n When a cellular phone is not paired:
1 MCN CID
To set group ringer tone
MbN: Select the current setting of the
group ringer tone. a MSELECTN a MbN:
Select the desired ringer tone. a MSAVEN
MOFFN
MbN: “Phonebook” a MSELECTN
MbN: Select the desired entry. a
MMENUN
R To edit the number:
MbN: “Edit” a MSELECTN
Press MEDITN repeatedly until the
phone number is shown in the
desired format. a MSAVEN a MbN:
“Phonebook” a MSELECTN a
Go to step 4.
MbN: “Save phonebook” a
MSELECTN
Continue from step 3, “Editing entries”,
page 43.
Finding and calling from a
phonebook entry
Groups
Groups can help you find entries in the
phonebook quickly and easily. You can
change the group name for groups 4-9
(“Friends”, “Family”, etc.). By assigning
different ringer tones for different groups of
callers, you can identify who is calling (ringer
ID), if you have subscribed to Caller ID service.
Changing group names/setting ringer
ID
42
MFN W a MMENUN
MbN: “Group” a MSELECTN
MbN: Select the desired group. a
MSELECTN
R If you selected “Home”, “Cell 1”, or
“Cell 2”, go to step 5.
To change group names
MbN: “Group name” a MSELECTN a
Edit the name (10 characters max.). a
MSAVEN
MFN W
To scroll through all entries
MbN: Select the desired entry.
To search by first character
Press the dial key (0 to 9, or #)
which contains the character you are
searching for.
MbN: Scroll through the phonebook if
necessary.
To search by group
MGROUPN
MbN: Select the desired group. a
MSELECTN
MbN: Scroll through the phonebook if
necessary.
To search by query
You can narrow down the search to enter
the first characters of a name.
To search for the name, enter the
first characters (up to 4) in
uppercase (page 41). a MOKN
MbN: Scroll through the phonebook if
necessary.
n Using a cellular line:
MCELLN
R The unit starts dialing
immediately in the following
situations.
– Only 1 cellular phone is
paired.
– A specific line is set to make
cellular calls (page 22).
MbN: Select the desired cellular
phone. a MSELECTN
n Using a landline:
For assistance, please visit http://shop.panasonic.com/support
Phonebook
Editing entries
Find the desired entry (page 42).
MbN: Select the desired group (page 42).
a MSELECTN 2 times a MOFFN
MMENUN a MbN: “Edit” a MSELECTN
Edit the name if necessary. a MOKN
Edit the phone number if necessary. a
MOKN
Erasing entries
Erasing an entry
Find the desired entry (page 42).
MMENUN a MbN: “Erase” a MSELECTN
MbN: “Yes” a MSELECTN a MOFFN
Erasing all entries
Speed dial
You can assign 1 phone number to each of
the dial keys (1 to 9) on the handset.
Adding phone numbers to speed
dial keys
n By entering phone numbers:
1 Press and hold the desired speed dial
key (1 to 9). a MADDN
MFN W a MMENUN
MbN: “Manual” a MSELECTN
MbN: “Erase all” a MSELECTN
MbN: Select the desired group. a
MSELECTN
Enter the party’s phone number (24
digits max.). a MOKN a MSELECTN
a MOFFN
MbN: “Yes” a MSELECTN
MbN: “Yes” a MSELECTN a MOFFN
Chain dial
This feature allows you to dial phone numbers
in the phonebook while you are on a call. This
feature can be used, for example, to dial a
calling card access number or bank account
PIN that you have stored in the phonebook,
without having to dial manually.
pauses after the number and PIN as
necessary (page 25).
R If you have rotary/pulse service, you need
to press * before pressing MFN W in step
1 to change the dialing mode temporarily to
tone. When adding entries to the
phonebook, we recommend adding * to
the beginning of phone numbers you wish
to chain dial (page 41).
During an outside call, press MFN W.
MbN: Select the desired entry.
Press M
N or MCALLN to dial the
number.
R To make the call using the
speakerphone, press MZN.
Note:
R When storing a calling card access number
and your PIN in the phonebook as one
phonebook entry, press MDN (Pause) to add
Enter the party’s name (16 characters
max.). a MOKN
n From the phonebook:
1 Press and hold the desired speed dial
key (1 to 9). a MADDN
MbN: “Phonebook” a MSELECTN
MbN: Select the desired entry. a
MSAVEN a MOFFN
Note:
R If you edit a phonebook entry which is
assigned to a speed dial key, the edited
entry does not transfer to the speed dial
key.
Editing an entry
Press and hold the desired speed dial key
(1 to 9). a MMENUN
MbN: “Edit” a MSELECTN
Edit the name if necessary. a MOKN
For assistance, please visit http://shop.panasonic.com/support
43
Phonebook
Edit the phone number if necessary. a
MOKN a MSELECTN a MOFFN
Erasing an entry
Press and hold the desired speed dial key
(1 to 9). a MMENUN
MbN: “Erase” a MSELECTN
MbN: “Yes” a MSELECTN a MOFFN
Viewing an entry/Making a call
n Using a cellular line:
1 Press and hold the desired speed dial
key (1 to 9).
MCELLN
R The unit starts dialing immediately
in the following situations.
– Only 1 cellular phone is paired.
– A specific line is set to make
cellular calls (page 22).
MbN: Select the desired cellular phone.
a MSELECTN
n Using a landline:
1 Press and hold the desired speed dial
key (1 to 9).
44
To make a call, press M
N.
For assistance, please visit http://shop.panasonic.com/support
Programming
Menu list
To access the features, there are 2 methods.
n Scrolling through the display menus
1 MMENUN
Press MCN or MDN to select the desired main menu. a MSELECTN
Press MCN or MDN to select the desired item from the next sub-menus. a MSELECTN
Press MCN or MDN to select the desired setting. a MSAVEN
n Using the direct command code
1 MMENUN a Enter the desired code.
Example: Press MMENUN#101.
Select the desired setting. a MSAVEN
Note:
R To exit the operation, press MOFFN.
R In the following table, < > indicates the default settings.
indicates the reference page number.
R In the following table,
R Display menu order and sub-menu may vary depending on your model.
Display menu tree and direct command code table
Main menu: W “Phonebook”
Operation
Code
Viewing the phonebook entry.
#280
Main menu:
“Caller list”
Operation
Code
Viewing the caller list.
#213
Main menu:
42
58
“Answering device”
Sub-menu 1
Sub-menu 2
Settings
Code
Play new message
–
–
#323
67
Play all message
–
–
#324
67
Erase all
message*1
–
–
#325
68
Record greeting*1
–
#302
66
Check greeting
–
#303
67
Pre-recorded*1
(Reset to pre-recorded
greeting)
–
#304
67
Greeting
For assistance, please visit http://shop.panasonic.com/support
45
Programming
Sub-menu 1
Sub-menu 2
Settings
Code
New message
alert*1
Outgoing call
– On/Off
On

#338
68
Outgoing call
– Notification to
Settings
–
Outgoing call
– Remote code
Activate

Base unit beep
On

#339
68
Ring count*1
Toll saver
2-7 rings
<4 rings>
#211
71
Recording time*1
<3 min>
1 min
Greeting only*2
#305
71
Remote code*1
<111>
#306
70
Screen call
– Handset

Off
#310
71
Screen call
– Base unit*1, *3

Off
#G310
Answer on*1
–
–
#327
66
Answer off*1
–
–
#328
66
Main menu:
“Voicemail
access”*4
Operation
Code
Listening to voicemail messages.
#330
Main menu:
“Intercom”
Operation
Code
Paging the desired unit.
#274
46
74
For assistance, please visit http://shop.panasonic.com/support
33
Programming
Main menu:
“Bluetooth”
Sub-menu 1
Sub-menu 2
Link to cell
– 1:Add new
device*5
(for CELL 1)
– 2:Add new
device*5
(for CELL 2)
Connect*1/
Disconnect*1
Settings
Code
–
#6251*6
Ringer volume
– Handset
Off–6 <6>
Ringer volume
– Base unit*1
Off–6 <1>
Ringer tone*8
*6
*7
#6291*6
Select unit to
ring*1

Handset 1-6
#6271*6
Ring as cell
(limited)*1

On (without
Talking CID)
Off
#6141*6
Alert settings*1
– Alert On/Off

Off
#6101*6
Alert settings*1
– Voice alert

Off
#6031*6
Alert settings*9
– Alert tone
*6
*7
#6041*6
–
#6241*6
Pair
21
#6252*7
#6281*6
25
#6282*7
#G6281*6
31
#G6282*7
–
#6292*7
20
#6272*7
20
#6142*7
62
#6102*7
62
#6032*7
62
#6042*7
19
#6242*7
Unpair
–
#6111*6
19
#6112*7
Voice quality*1, *2
Enhanced
Normal
–
#601
22
–
#618
60
Add new device*5
–
#621
64
Connect*1/
Disconnect*1
–
#622
64
Pair
–
#621
64
Unpair
–
#612
64
Phonebook
transfer
Headset
–
For assistance, please visit http://shop.panasonic.com/support
47
Programming
Sub-menu 1
Sub-menu 2
Settings
Code
Settings
Auto connect*1
Off
<1 min>
3 min
5 min
10 min
#632
20
#633
22
Cell line only
mode*1
On

–
#157
21
Cell line select
– Handset

Cellphone 1*5
Cellphone 2*5
#634
22
Cell line select
– Base unit*1, *3
*5
Cellphone 2*5
#G634
Set PIN*1
<0000>
Cell area code*1
#619
22
International
code*1
–
#117
60
Country code*1
–
#118
prefix*1
–
#119
–
#134
Trunk
–
Unpair*2, *10
Main menu:
“Set date & time”
Sub-menu 2
Sub-menu 1
Memo alarm
Settings
–
Date and time*1
Alarm1–3
Time
adjustment*1, *11
Main menu:
–
Code
–
#101
17

Once
Daily
Weekly
#720
53

Manual
#226
–
“Speed dial”
Operation
Code
Viewing the speed dial entry.
#261
48
–
For assistance, please visit http://shop.panasonic.com/support
43
Programming
Main menu:
“Settings”
Sub-menu 1
Sub-menu 2
Settings
Code
Ring adjustments
Ringer volume
(Incoming)
– Handset*4
Off–6 <6>
#160
–
Ringer volume
(Incoming)
– Base unit*1, *4
Off–6 <1>
#G160
–
Intercom ringer
volume
(Handset)
1–6 <6>
#175
–
Ringer tone
(Incoming)*4, *8, *12
(Handset)

#161
–
Intercom ringer
tone*8, *12
(Handset)

#163
–
Interrupt tone
– Handset*13

Off
#201
27
Interrupt tone
– Base unit*1, *3, *13

Off
#G201
32
Silent mode
– Handset
On/Off
– On
– 
#238
54
Start/End
– <11:00 PM/
06:00 AM>
#237
55
Select group
Home
Cell 1
Cell 2
Group 4-9
#241
55
On/Off
– On
– 
#G238
54
Start/End
– <11:00 PM/
06:00 AM>
#G237
55
Select group
Home
Cell 1
Cell 2
Group 4-9
#G241
55
Silent mode
– Base unit*1, *3
For assistance, please visit http://shop.panasonic.com/support
49
Programming
Sub-menu 1
Sub-menu 2
Set date & time
Date and time*1
Talking caller ID
Low battery alert
Key detector
setting*14
– 1:Add new device
(for Detector1)*15
– 2:Add new device
(for Detector2)
– 3:Add new device
(for Detector3)
– 4:Add new device
(for Detector4)
Settings
Code
–
#101
17
Memo alarm
– Alarm1–3

Once
Daily
Weekly
#720
53
Time adjustment*1, *11

Manual
#226
–
Handset

Off
#162
58
Base unit*1
On

#G162
Off

Every 3 hours
Every 6 hours
#176
18
Detector1
#6561
–
Detector2*16
#6562*16
Detector3*16
#6563*16
Detector4*16
#6564*16
–
Change name*1
Registration
–
#6571
–
#6572*16
#6573*16
#6574*16
Deregistration
–
#6581
–
#6582*16
#6583*16
#6584*16
Automated callers
block*1
Block/Unblock
–
#787
38
Allow name list
–
#794
38
Access code
–
#789
39
Record greeting
#791
39
Check greeting
#792
40
Pre-recorded
#793
39
#790
39
Automated callers
block greeting
Blocked calls
count
50
–
For assistance, please visit http://shop.panasonic.com/support
Programming
Sub-menu 1
Sub-menu 2
Call block*1
Block a single
number
Settings
–
Code
Block range of
numbers
–
#217
35
36
Block unknown CID
(CID: Caller ID)
Block

#240
36
One ring for
blocked call

No
#173
36
–
#177
36
Blocked calls
count
Speed dial
–
–
#261
43
Cell locator*17
–
–
#248
33
Record greeting*1
–
–
#302
66
–
#331
73

Off
#332
73
Voicemail*4
Save VM access#*1
(VM: Voicemail)
VM tone detect*1
Message indicator
–

Off
#340
71
LCD contrast
(Display contrast)
–
Level 1–4 <2>
#145
–
Handset name
–
Display name
–
Auto intercom
#104
57
On

–
#105
57
Handset
On

#273
34
Base unit*1, *3
On

#G273
Key tone
–

Off
#165
–
Caller ID edit
(Caller ID number auto
edit)
–

Off
#214
59
Auto talk*18
–
On

#200
25
For assistance, please visit http://shop.panasonic.com/support
51
Programming
Sub-menu 1
Sub-menu 2
Settings
Code
Set tel line*4
Set dial mode*1

Pulse
#120
18
Set flash time*1, *19
80 ms
90 ms
100 ms
110 ms
160 ms
200 ms
250 ms
300 ms
400 ms
600 ms
<700 ms>
900 ms
#121
26
Set line mode*1, *20
A 
#122
–

Off
#194
26,
32
Call
–
sharing*1
Registration
Register handset
–
#130
57
Deregistration*2
–
#131
57

Off
#152
28
Display

Español
#110
17
Announcement*1

Español
#112
17
Power failure
Change language
Main menu:
–
“Customer support”
Operation
Code
Displaying customer support Web address.
#680
Main menu:
–
“Baby monitor”
Sub-menu 1
Settings
Code
On/Off
–
On

#268
55
Sensitivity level
–
Low

High
#269
56
52
Sub-menu 2
For assistance, please visit http://shop.panasonic.com/support
Programming
Main menu:
“Key detector”*14
Sub-menu 1
Sub-menu 2
Settings
Code
Search
–
–
Battery check
–
–
*1
*2
*3
*4
*5
*6
*7
*8
*9
*10
*11
*12
*13
*14
*15
*16
*17
*18
*19
*20
#655
–
If you program these settings using one of the units, you do not need to program the same
item using another unit.
This menu is not displayed when scrolling through the display menus. It is only available in
direct command code.
KX-TGE670 series: page 4
When the cellular line only mode is turned on, these menus are not displayed (page 21).
After the Bluetooth device is paired, the device name is displayed.
For CELL 1
For CELL 2
The preset melodies in this product (“Tone 3” - “Melody 10”) are used with permission of
© 2009 Copyrights Vision Inc.
The preset melodies in this product (“Tone 1” and “Tone 2”) are used with permission of
© 2013 Copyrights Vision Inc.
This setting is available when a bluetooth device is paired.
This feature allows the unit to automatically adjust the date and time each time caller
information including date and time is received.
To turn this feature on, select “Caller ID auto”. To turn this feature off, select
“Manual”. (Caller ID subscribers only)
To use this feature, set the date and time first (page 17).
If you subscribe to a distinctive ring service (such as IDENTA-RING), select a tone (tone 1 or
2). If you select a melody, you cannot distinguish lines by their ringers.
This tone lets you know when you receive an outside call while you are on another line or an
intercom call. If you select “On”, the tone sounds 2 times.
This setting is available when you have the key detector (KX-TGA20). Read the installation
manual for more information on the key detector.
For models with supplied key detectors, the display shows “1: Detector1”.
If you register 2 or more key detectors.
KX-TGE660 series: page 4
If you subscribe to a Caller ID service and want to view the caller’s information after lifting up
the handset to answer a call, turn off this feature.
The flash time depends on your telephone exchange or host PBX. Contact your PBX
supplier if necessary. The setting should stay at “700 ms” unless pressing MFLASHN fails to
pick up the waiting call.
Generally, the line mode setting should not be changed. This setting automatically maintains
receiver volume at the proper level depending on the current telephone line condition. Set
the line mode to “A” if telephone line condition is not good.
Alarm
An alarm sounds at the set time for 1 minute
and is repeated 5 times at 5 minute intervals
(snooze function). A text memo can also be
displayed for the alarm. A total of 3 separate
alarm times can be programmed for each
handset. You can set one of 3 different alarm
options (once, daily, or weekly) for each alarm
time.
For assistance, please visit http://shop.panasonic.com/support
53
Programming
Important:
R Make sure the unit’s date and time setting
is correct (page 17).
MMENUN#720
MbN: Select the desired alarm option. a
MSELECTN
MbN: Select the desired alarm. a
MSELECTN
“Off”
Turns alarm off. Go to step 10.
“Once”
An alarm sounds once at the set time.
“Daily”
An alarm sounds daily at the set time.
Go to step 5.
“Weekly”
Alarm sounds weekly at the set time(s).
Proceed with the operation according to
your selection in step 3.
n Once:
Enter the desired month and date. a
MOKN
n Weekly:
MbN: Select the desired day of the week
and press MSELECTN. a MOKN
Silent mode
Silent mode allows you to select a period of
time during which the handset and/or base
unit will not ring for outside calls. This feature
is useful for time periods when you do not
want to be disturbed, for example, while
sleeping. Silent mode can be set for each unit.
Using the phonebook’s group feature
(page 42), you can also select groups of
callers whose calls override silent mode and
ring the unit (Caller ID subscribers only).
Important:
R Make sure the unit’s date and time setting
is correct (page 17).
R We recommend turning the base unit ringer
off (page 47, 49) in addition to turning the
silent mode on. (KX-TGE660 series: page 4)
R If you have set the alarm, the alarm sounds
even if the silent mode is turned on.
Set the desired time.
Turning silent mode on/off
*: Select “AM” or “PM”. a MOKN
For handset setting: MMENUN#238
For base unit setting (using a
handset)*1: MMENUN#*238
MbN: Select the desired setting. a
MSAVEN
R If you select “Off”, press MOFFN to
exit.
Enter the desired hour and minute you
wish to start this feature.
Enter a text memo (10 characters max.).
a MOKN
MbN: Select the desired alarm tone. a
MSELECTN
R We recommend selecting a different
ringer tone from the one used for
outside calls.
MbN: Select the desired snooze setting.
a MSAVEN
10
MSELECTN a MOFFN
Note:
R Press MSTOPN to stop the alarm completely.
R When the handset is in use, the alarm will
not sound until the handset is in standby
mode.
54
R Press any dial key or MSNOOZEN to stop
the sound but keep the snooze function
activated.
R If you want to make an outside call when
the snooze function is activated, please
stop the snooze function before making the
call.
*1
*: Select “AM” or “PM”. a MOKN
Enter the desired hour and minute you
wish to end this feature.
*: Select “AM” or “PM”.
MSAVEN a MOFFN
KX-TGE670 series: page 4
For assistance, please visit http://shop.panasonic.com/support
Programming
Changing the start and end time
For handset setting: MMENUN#237
For base unit setting (using a
handset)*1: MMENUN#*237
Continue from step 3, “Turning silent
mode on/off”, page 54.
KX-TGE670 series: page 4
*1
Selecting groups to bypass silent
mode
*1
For handset setting: MMENUN#241
For base unit setting (using a
handset)*1: MMENUN#*241
MbN: Select the desired groups. a
MSELECTN
R “ ” is displayed next to the selected
group numbers.
R To cancel the selected group:
MbN: Select the group. a Press
MSELECTN again. “ ” disappears.
MSAVEN a MOFFN
KX-TGE670 series: page 4
Baby monitor
This feature allows you to listen in on a room
where another handset is located, allowing
you to easily monitor from different areas of
the house or even while away from home. The
monitored handset (placed in a baby’s room,
for example) will automatically call the
monitoring handset, base unit, or the phone
number stored when it detects sound.
Important:
R Before using this feature, we recommend
that you test this feature and adjust the
baby monitor sensitivity as needed,
especially if you plan to monitor from
outside.
R This feature should not be used as a
substitute for a medical or caregiver’s
supervision. It is the caregiver’s
responsibility to stay close enough to
handle any eventuality.
Note:
R If the unit is connected to a PBX system,
you cannot set the baby monitor.
R During the monitoring mode, battery
consumption is faster than usual. We
recommend leaving the monitored handset
on the base unit or charger.
R The monitored handset never rings while it
is being monitored. If the base unit is
placed near the monitored handset, we
recommend turning off the base unit ringer
volume (page 47, 49).
Setting the baby monitor
Perform the setting operation with the handset
to be monitored (for example, the handset
placed in a baby’s room).
To monitor with a unit
The internal baby monitor feature is available:
– between handsets
– between a handset and the base unit*1
*1 KX-TGE670 series: page 4
MMENUN#268
MbN: “On” a MSELECTN
MbN: Select the desired unit’s number to
monitor with. a MSAVEN
R “Baby monitor” will be displayed.
R The registered unit’s name/number is
displayed.
Note:
R When this feature is on, another handset or
the base unit can hear the monitored
handset by making an intercom call.
To monitor from outside
If you enable this feature, the unit will call a
pre-programmed phone number when the
handset detects sound. After you answer the
call, you can listen in on the room where the
handset is located.
This feature is only available for landline.
n From the phonebook:
1 MMENUN#268
MbN: “On” a MSELECTN
For assistance, please visit http://shop.panasonic.com/support
55
Programming
MbN: Select “Outgoing call” to
monitor from outside. a MADDN
MbN: “Phonebook” a MSELECTN
MbN: Select the phonebook entry. a
MSAVEN
R “Baby monitor” will be displayed.
Note:
R If you edit a phonebook entry which is
assigned for monitoring, the edited entry
does not transfer to the monitor.
n By entering phone numbers:
1 MMENUN#268
MbN: “On” a MSELECTN
MbN: “Manual” a MSELECTN
MbN: Select “Outgoing call” to
monitor from outside. a MADDN
Enter the desired name. a MOKN
Enter the desired number. a MOKN
a MSELECTN
R “Baby monitor” will be displayed.
Note:
R The registered name/number is displayed.
Erasing an outside monitoring
number
Press MMENUN on the handset being
monitored.
MbN: “On/Off” a MSELECTN
MbN: “On” a MSELECTN
MbN: Select the outside line.
MMENUN a MbN: “Erase” a MSELECTN
MbN: “Yes” a MSELECTN a MOFFN
Baby monitor sensitivity
You can adjust the sensitivity of the baby
monitor. Increase or decrease the sensitivity to
adjust the sound level needed to trigger the
baby monitor feature.
R This feature cannot be set during a
monitoring call.
Press MMENUN on the handset being
monitored.
MbN: “Sensitivity level” a
MSELECTN
MbN: Select the desired setting. a
MSAVEN a MOFFN
Turning off the baby monitor
The monitored handset cannot be used while
baby monitor is set to “On”.
Press MMENUN on the handset being
monitored.
MbN: “On/Off” a MSELECTN
MbN: “Off” a MSELECTN a MOFFN
Editing an outside monitoring number
Press MMENUN on the handset being
monitored.
MbN: “On/Off” a MSELECTN
56
MbN: “On” a MSELECTN
MbN: Select the outside line.
MMENUN a MbN: “Edit” a MSELECTN
Edit the name if necessary. a MOKN
Edit the phone number if necessary. a
MOKN a MSELECTN
Answering the baby monitor
n When monitoring with a unit:
N to answer a call.
Handset: Press M
Base unit: Press MZN to answer a call.*1
*1 KX-TGE670 series: page 4
If you want to respond from the monitoring
unit, press MMUTEN.
R The monitoring unit will answer calls
automatically when the auto intercom
feature is set to “On” (page 34).
Note:
R If you receive an outside call when
communicating with the monitored
handset, the interrupt tone sounds.
– To answer the call with the handset,
press MOFFN, then press M
N.
– To answer the call with the base unit,
press MZN 3 times.*1
For assistance, please visit http://shop.panasonic.com/support
Programming
*1
If MMUTEN is pressed, press MZN 2
times.
n When monitoring from outside:
Answer the call.
If you want to respond from your monitoring
phone, press #1 using tone dialing.
You can turn off the baby monitor feature
by pressing #0.
Note:
R The unit disconnects the call
automatically after 2 minutes.
Important:
R See page 6 for information on the available
model.
Registering a handset to the
base unit
The supplied handset and base unit are
pre-registered. If for some reason the handset
is not registered to the base unit, re-register
the handset.
Handset:
MMENUN#130
MbN: “Panasonic DECT” a
MSELECTN
Base unit:
Press and hold MLOCATORN or
MHANDSET LOCATORN for about 5
seconds.
R If all registered handsets start ringing,
press MLOCATORN or MHANDSET
LOCATORN again to stop, then repeat
this step.
Handset:
Press MOKN, then wait until a long beep
sounds.
Other programming
Changing the handset name
The default handset name is “Handset 1” to
“Handset 6”. You can customize the name
of each handset (“Bob”, “Kitchen”, etc.). This is
useful when you make intercom calls between
handsets. To display the handset name in
standby mode, turn on the handset name
display feature (page 57).
MMENUN#104
Enter the desired name (10 characters
max.). a MSAVEN a MOFFN
Displaying the handset name
You can select whether or not the handset
name is displayed in standby mode. The
default setting is “Off”.
Deregistering a handset
A handset can cancel its own registration to
the base unit, or other handsets registered to
the same base unit. This allows the handset to
end its wireless connection with the system.
MMENUN#131
R All handsets registered to the base unit
are displayed.
MbN: Select the handset you want to
cancel. a MSELECTN
MbN: “Yes” a MSELECTN a MOFFN
MMENUN#105
MbN: Select the desired setting. a
MSAVEN a MOFFN
Registering a unit
Operating additional units
Additional handsets
Up to 6 handsets can be registered to the
base unit.
For assistance, please visit http://shop.panasonic.com/support
57
Caller ID Service
Using Caller ID service
Important:
R This unit is Caller ID compatible. To use
Caller ID features, you must subscribe to a
Caller ID service. Contact your phone
service provider for details.
Caller ID features
When an outside call is being received, the
caller information is displayed.
Caller information for the last 50 callers is
logged in the caller list from the most recent
call to the oldest.
R If the unit cannot receive caller information,
the following is displayed:
– “Out of area”: The caller dials from
an area which does not provide a Caller
ID service.
– “Private caller”: The caller
requests not to send caller information.
– “Long distance”: The caller makes a
long distance call.
R If the unit is connected to a PBX system,
caller information may not be properly
received. Contact your PBX supplier.
Talking Caller ID
Handset / Base unit
This feature lets you know who is calling
without looking at the display.
To use this feature, you must:
– subscribe to a Caller ID service of your
phone service provider.
– turn this feature on (page 50).
When caller information is received, the
handsets and/or base unit announce the
caller’s name or phone number received from
your phone service provider following every
ring.
R Name pronunciation may vary. This feature
may not pronounce all names correctly.
R Caller ID service has a limit of how many
characters can be displayed. If the caller’s
name is too long, the unit may not be able
to display or announce the entire name.
Phonebook name announcement
When caller information is received and it
matches a phone number stored in the
phonebook, the stored name in the
phonebook is announced.
Missed calls
Caller list
If a call is not answered, the unit treats it as a
missed call. The display shows “Missed
call”.
Important:
R Make sure the unit’s date and time setting
is correct (page 17).
Note:
R Even when there are unviewed missed
calls, “Missed call” disappears from the
standby display if the following operation is
performed by one of the units:
– A handset is replaced on the base unit
or charger.
– Pressing MOFFN on a handset.
MCN CID
Phonebook name display
To call back, press MSELECTN.
To exit, press MOFFN.
MCELLN
R The unit starts dialing immediately in
the following situations.
– Only 1 cellular phone is paired.
When caller information is received and it
matches a phone number stored in the
phonebook, the stored name in the
phonebook is displayed and logged in the
caller list.
58
Viewing the caller list and calling
back
n Using a cellular line
Press MCN to search from the most recent
call, or MDN to search from the oldest call.
For assistance, please visit http://shop.panasonic.com/support
Caller ID Service
– A specific line is set to make cellular
calls (page 22).
MbN: Select the desired cellular phone. a
MSELECTN
n Using a landline
MCN CID
To call back, press M
To exit, press MOFFN.
Press MCN to search from the most recent
call, or MDN to search from the oldest call.
N.
Note:
R If the entry has already been viewed or
answered, “ ” is displayed.
or
indicates the caller information
was received from the cellular line.
Editing a caller’s phone number
You can edit a phone number in the caller list
by removing its area code and/or the long
distance code “1”.
n When a cellular phone is paired:
1 MCN CID
MbN: Select the desired entry. a
MSELECTN
Press * (Edit) repeatedly until the
phone number is shown in the desired
format.
Using a cellular line:
To make a cellular call, continue from
step 4, “Viewing the caller list and
calling back”, page 58.
Using a landline:
n When a cellular phone is not paired:
1 MCN CID
MbN: Select the desired entry. a
MMENUN
MbN: “Edit” a MSELECTN
Press MEDITN repeatedly until the
phone number is shown in the desired
format.
Caller ID number auto edit feature
Once you call back an edited number, the unit
which was used to call back remembers the
area code and format of the edited number.
The next time someone calls from the same
area code, caller information is customized by
the unit as follows:
– When the call is being received, the Caller
ID number is displayed in the same format
as the edited number.
– After the call has ended, the caller’s phone
number is displayed in the same format as
the edited number, when reviewed from the
caller list.
For example, you can use this feature to set
the unit to ignore the area code of callers in
your area, so that you can call these local
numbers using caller information without
dialing the area code.
To activate this feature, you must edit an entry
in the caller list, then call that number. After
that, phone numbers from that caller’s area
code are edited automatically.
This feature can be set for each unit
(page 51). The default setting is “On”.
Note:
R Phone numbers from the 4 most recently
edited area codes are automatically edited.
Erasing selected caller
information
MCN CID
MbN: Select the desired entry.
MERASEN a MbN: “Yes” a MSELECTN
a MOFFN
Erasing all caller information
MCN CID
MERASEN a MbN: “Yes” a MSELECTN
a MOFFN
For assistance, please visit http://shop.panasonic.com/support
59
Using Bluetooth® Devices
Copying phonebook from a
cellular phone (phonebook
transfer)
You can copy phonebook entries from the
paired cellular phones or other cellular phones
(not paired) to the unit’s phonebook. A cellular
phone must be compatible with Bluetooth
wireless technology.
Important:
R Your cellular phone must support Phone
Book Access Profile (PBAP) or Object
Push Profile (OPP) specification.
R If a copied entry has 2 or more phone
numbers, each phone number (6 max.) is
stored as a separate entry with the same
name.
R If a phonebook entry includes additional
data such as a picture, that entry may fail to
copy to the base unit.
R If your cellular phone includes international
call entries, set the conversion codes
before copying (page 60).
Handset:
MMENUN#618
Handset:
To copy from paired cellular phones:
MbN: Select the desired cellular phone. a
MSELECTN
R Copied items are stored to the group
(“Cell 1” or “Cell 2”) which the
cellular phone is paired to.
To copy from other cellular phones
(not paired):
MbN: “Other cell” a MSELECTN a
MbN: Select the group you want to copy to.
a MSELECTN
Handset:
When “Use the cell to
transfer phone book” is displayed:
Go to step 4.
When “Select mode” menu is
displayed:
MbN: Select “Auto” or “Manual”. a
MSELECTN
“Auto”: Download all entries from the
cellular phone automatically. Go to step 5.
60
“Manual”: Copy entries you selected.
R “Select mode” menu is displayed
only when the cellular phone supports
PBAP (Phone Book Access Profile) for
Bluetooth connection.
R Some cellular phones may require you
to perform an operation on the cellular
phone even if you select “Auto”.
Cellular phone:
Follow the instructions of your cellular
phone to copy phonebook entries.
R For other cellular phones (not paired),
you need to search for and select the
base unit. The Bluetooth PIN (default:
“0000”) may be required.
R If your cellular phone prompts you to
confirm the passkey, tap MOKN or
otherwise to accept the pairing request.
R The entries being copied are displayed
on the handset.
Handset:
Wait until “Completed” is displayed.
R You can continue copying other entries
if necessary.
Handset: MOFFN
Note:
R Some copied entries may have characters
which are not available. These characters
can be displayed but cannot be entered
when editing an entry.
R The unit does not support some characters.
If a copied entry includes those characters,
they are replaced with other available
characters or “H”.
R If you receive a call while copying
phonebook entries, the copying procedure
stops. Try again after finishing the call.
Setting conversion codes
You must first set the following 3 dialing codes
before transferring the phonebook from your
cellular phone (4 digits max. each).
– “International code”: An international
prefix used when you make an international
call.
– “Country code”: Your country code for
international calls.
For assistance, please visit http://shop.panasonic.com/support
Using Bluetooth® Devices
– “Trunk prefix”: A trunk prefix; the initial
digit(s) to be dialed in a domestic call, prior
to the area code.
MMENUN
To store “International code”:
#117
To store “Country code”: #118
To store “Trunk prefix”: #119
Enter the desired number. a MSAVEN
a MOFFN
Note:
R After you copy the entries, confirm that the
numbers were transferred correctly.
Link to Cell app
For Android™ users
– [International code], [Country code],
and [Trunk prefix] (page 60)
*1 When your paired Android phone is within
the base unit’s range, the date and time
information is updated on the handset’s
display, if time adjustment feature is
activated on your Android phone.
Installing the Link to Cell app
Download links are also available at the web
page below.
www.panasonic.net/pcc/support/tel/
appalerts
The free Link to Cell app helps you integrate
your Android phone with your DECT phone for
convenient use.
Important:
R Your cellular phone must support SPP
(Serial Port Profile) specification.
n Application (App) Alerts On/Off
This feature alerts your DECT phone when
your paired Android phone receives the
following alert information:
– [Google Calendar]™
– [Email]
– [Gmail]™
– [Text messages]
– [Facebook]
– [Twitter]
– [Instagram]
– [Low Battery] information
You can turn each type of alert on or off using
the Link to Cell app. If you turn the alerting
app on, your DECT phone alerts you with the
corresponding information.
n Phone Settings
Using your paired Android phone, you can
program your Phone Settings for the
following features:
– [Time adjustment]*1
– [Cell line only mode] (page 21)
Starting the app for the first time
Make sure that your Android device’s
Bluetooth feature is turned on and that
your Android device is paired to the base
unit.
Start the Link to Cell app by tapping its
icon.
Follow the on-screen instructions.
Important:
R For further information, refer to the
instructions on web page listed above.
R To use this feature, the following settings
are required.
– Android phone: Bluetooth must be
turned on.
– Android phone: [Application Alerts
manager]*1 must be turned on.
For assistance, please visit http://shop.panasonic.com/support
61
Using Bluetooth® Devices
– Handset: “Alert On/Off” must be
turned on (page 62).
R If this feature does not work, turn on your
device’s Bluetooth feature, unplug the base
unit’s AC adaptor, and then reconnect it.
*1 Turning on [Application Alerts
manager]
Use the following procedure after
installing the Link to Cell app.
Android 2.x: Open your device’s
[Settings] app. a Tap [Accessibility].
a Turn on the [Accessibility] and
[Application Alerts manager]
checkboxes.
Android 4.x: Open your device’s
[Settings] app. a Tap [Accessibility].
a Turn on [Application Alerts
manager].
Requirements
R An Android device (Android 2.1 or later)
Text message (SMS) alert
For
iPhone®
and
BlackBerry®
If your cellular phone is paired to the base unit
and receives notifications, the handset can
alert you:
– by briefly displaying a message
– by announcement
– by sounding alert tones
Important:
R For Android users: Use the Link to Cell app
to enable the desired alerts (page 61).
Turning alert on/off
Once this feature is turned on, it will alert you
on the handset when your cellular phone
receives notifications.
– “On” (default): The handset alerts you.
– “Off”: The handset does not alert you.
For CELL 1: MMENUN#6101
For CELL 2: MMENUN#6102
MbN: Select the desired setting. a
MSAVEN a MOFFN
users
This feature alerts you on your DECT phone
when your paired cellular phone receives SMS
messages. The Link to Cell app is not required
for iPhone and BlackBerry users.
Important:
R Your cellular phone must support MAP
(Message Access Profile) specification.
R For further information, refer to the
instructions on web page listed below:
www.panasonic.net/pcc/support/tel/sms/
R To use this feature, the following settings
are required:
– iPhone and BlackBerry Phone:
Bluetooth must be turned on.
– Handset: “Alert On/Off” must be
turned on (page 62).
R If this feature does not work, turn on your
device’s Bluetooth feature, unplug the base
unit’s AC adaptor, and then reconnect it.
62
Alert settings for your
DECT phone
Setting the voice alert
You can turn on/off the voice alert.
– “On” (default): The handset notifies you by
voice announcement.
– “Off”: Voice announcement is not
available as alert.
For CELL 1: MMENUN#6031
For CELL 2: MMENUN#6032
MbN: Select the desired setting. a
MSAVEN a MOFFN
Selecting the alert tone
For CELL 1: MMENUN#6041
For CELL 2: MMENUN#6042
MbN: Select the desired setting. a
MSAVEN a MOFFN
For assistance, please visit http://shop.panasonic.com/support
Using Bluetooth® Devices
Remote voice assist
For iPhone® and Android™ smartphone
users
You can use the handset or base unit*1 to
operate the voice recognition feature of the
paired cellular phone (Siri®, Google Now™, or
S Voice). For example, you can speak into the
handset or base unit*1 and command your
cellular phone to make a call.
*1 KX-TGE670 series: page 4
Compatible voice recognition features
R Google Now, S Voice (Android 4.0 or later)
R Siri (iOS 8.0 or later)
Important:
R Your cellular phone must support the
Hands Free Profile (HFP) specification.
R In order to use this feature, your cellular
phone's voice recognition feature must be
ready to use.
– iPhone: Make sure Siri is turned on.
– Android: In order to use Google Now,
make sure your cellular phone is
registered to your Google account.
R If you have multiple voice recognition
features available for your cellular phone,
you may need to set the desired voice
recognition feature as the default.
R For Android users: Depending on your
cellular phone, you may need to set Google
Now or S voice as your cellular phone's
default voice recognition feature. For more
information, refer to the operating
instructions of your cellular phone.
Activating remote voice assist
Handset
R Go to step 3 in the following situations.
– Only 1 cellular phone is paired.
– A specific line is set to make cellular
calls (page 22).
MbN: Select the desired cellular phone. a
MSELECTN
Wait until “Voice assist” is displayed.
R A confirmation tone sounds.
R Speakerphone is turned on
automatically.
R To switch to the receiver, press MZN.
Speak your commands to your handset.
R When you have finished using remote
voice assist, press MOFFN.
Base unit*1
*1
KX-TGE670 series: page 4
Press MCELL 1N or MCELL 2N
R Skip this step in the following situations.
– Only 1 cellular phone is paired.
– A specific line is set to make cellular
calls (page 22).
Wait until a confirmation tone sounds.
Speak your commands to your base unit.
R When you have finished using remote
N or MZN.
voice assist, press M
Note:
R While using this feature, you cannot use
another unit to make a cellular call using
the same cellular line.
R If you receive a call on the landline or on
another cellular line while using this feature,
the interrupt tone sounds.
R If you receive a call on the same cellular
line while using this feature, voice
recognition ends and the unit receives the
incoming call.
R If your cellular phone is connected to the
base unit, you may not be able to use your
cellular phone’s microphone to operate its
voice recognition feature. In this case,
disconnect your cellular phone from the
base unit.
R The compatible voice commands depends
on the cellular phone voice recognition
feature.
For assistance, please visit http://shop.panasonic.com/support
63
Using Bluetooth® Devices
Using a Bluetooth headset
(optional)
By pairing a Bluetooth headset to the base
unit, you can enjoy hands-free conversations
when talking on landline calls.
Important:
R Your Bluetooth headset must support the
HeadSet Profile (HSP) specification.
R Only 1 Bluetooth headset can be paired to
the base unit.
R Only 2 Bluetooth devices can be used with
the unit at the same time (for example, 2
cellular lines, or the headset and 1 cellular
line*1).
R For best performance, we recommend
using your Bluetooth headset within 1 m
(3.3 feet) of the base unit. The base unit
can communicate with Bluetooth headsets
within an approximately 10 m (33 feet).
*1 You cannot use a Bluetooth headset to
talk on a cellular line.
Pairing a Bluetooth headset to
the base unit
Important:
R Make sure that the Bluetooth headset is not
connected to any other Bluetooth device.
Bluetooth headset:
Set your headset to pairing mode.
R Refer to the headset’s operating
instructions.
Handset:
MMENUN#621
If your headset PIN is “0000”, go to
step 4.
If your headset PIN is not “0000”,
press MCLEARN, then enter your headset
PIN.
R Typically, default PIN is “0000”. Refer
to the headset’s operating instructions.
64
Press MOKN, then wait until a long beep
sounds.
MOFFN
R When the HEADSET indicator on the
base unit lights up, you are ready to
use the headset.
Connecting/disconnecting a
Bluetooth headset
If you cannot connect the headset and base
unit using the headset, you can connect using
the handset.
To use your headset with another Bluetooth
device such as a cellular phone, you may
need to disconnect it from the base unit.
Important:
R Make sure that the headset is turned on.
To connect/disconnect:
MMENUN#622
R A long beep sounds.
MOFFN
Unpairing a Bluetooth headset
You can cancel a pairing of the headset that is
stored to the base unit.
MMENUN#612
MOFFN
MbN: “Yes” a MSELECTN
R When the headset is unpaired, the
HEADSET indicator is turned off.
Operating a Bluetooth wireless
headset using a landline
Important:
R Refer to your headset operating instructions
for headset operations.
R Some features described here may not be
available depending on Bluetooth headset.
Making landline calls with your
headset
Base unit*1
*1
KX-TGE670 series: page 4
For assistance, please visit http://shop.panasonic.com/support
Using Bluetooth® Devices
Press your headset’s button referring to
your headset operating instructions.
Dial the phone number using the base
unit after hearing the dial tone on your
headset.
When you finish talking, press your
headset’s button referring to your headset
operating instructions.
Answering landline calls with your
headset
To answer a landline call, press your
headset’s button.
When you finish talking, press your headset’s
button.
Note:
R If you cannot hang up the call using your
headset:
– press M
N (STOP) on the base unit.
(KX-TGE660 series: page 4)
– press MZN on the base unit 2 times.
(KX-TGE670 series: page 4)
n To switch to your headset:
Turn on the headset referring to your
headset operating instructions.
n To switch to the base unit (KX-TGE670
series: page 4):
Press MZN on the base unit.
Adjusting your headset receiver
volume
Base unit
Press MjN or MkN repeatedly while using your
headset.
Note:
R Depending on your headset, the receiver
volume may not be adjustable.
Call sharing between your headset
and the handset
Important:
R To activate this feature, you should set call
sharing mode to on beforehand (page 52).
n While the handset is on a landline call:
To join the conversation with your headset,
press your headset’s button.
n While your headset is on a landline call:
To join the conversation with the handset,
N.
press M
Switching between the base unit and
your headset
You can switch between the base unit and
your headset:
– during a landline call with the base unit
speakerphone. (KX-TGE670 series: page 4)
– during an intercom call between the base
unit and handset. (KX-TGE670 series:
page 4)
– while listening to messages recorded on
the base unit answering system.
For assistance, please visit http://shop.panasonic.com/support
65
Answering System for Landline
Answering system for
landline
The answering system can answer and record
calls for you when you are unavailable to
answer the phone.
You can also set the unit to play a greeting
message but not to record caller messages by
selecting “Greeting only” as the recording
time setting (page 71).
Important:
R Make sure the unit’s date and time setting
is correct (page 17).
Memory capacity (including your
greeting message)
The total recording capacity is about 18
minutes. A maximum of 64 messages can be
recorded.
Note:
R When message memory becomes full:
– “Messages full” is shown on the
handset display.
– The message counter on the base unit
flashes if the answering system is turned
on.
– If you use the pre-recorded greeting
message, the unit automatically switches
to another pre-recorded greeting
message asking callers to call again
later.
– If you recorded your own greeting
message, the same message is still
announced to callers even though their
messages are not recorded.
Turning the answering
system on/off
Base unit
Press MANSWER ON/OFFN to turn on/off the
answering system.
66
Handset
To turn on:
MMENUN#327
To turn off:
MMENUN#328
MOFFN
Note for base unit and handset:
R When the answering system is turned on,
the message counter on the base unit
displays the total number of messages (old
and new).
Greeting message
When the unit answers a call, a greeting
message is played to callers.
You can use either:
– your own greeting message
– a pre-recorded greeting message
Recording your greeting message
MMENUN#302
MbN: “Yes” a MSELECTN
After a beep sounds, hold the handset
about 20 cm (8 inches) away and speak
clearly into the microphone (2 minutes
max.).
Press MSTOPN to stop recording. a
MOFFN
Using a pre-recorded greeting
message
The unit provides 2 pre-recorded greeting
messages:
– If you reset to pre-recorded greeting or do
not record your own greeting message, the
unit plays a pre-recorded greeting asking
callers to leave a message.
– If the message recording time (page 71)
is set to “Greeting only”, callers’
messages are not recorded and the unit
plays a different pre-recorded greeting
message asking callers to call again.
For assistance, please visit http://shop.panasonic.com/support
Answering System for Landline
Resetting to a pre-recorded greeting
message
Use this procedure to erase your greeting
message and use a pre-recorded one.
Press MERASEN 2 times while the unit is not in
use.
MMENUN#304
Using the handset
MYESN a MOFFN
When new messages have been recorded:
– “New message” is displayed.
– The message indicator on the handset
flashes slowly if the message indicator is
turned on (page 71)
Playing back the greeting
message
Erasing all messages
MMENUN#303
To listen to new messages:
MMENUN#323
To listen to all messages:
MMENUN#324
When finished, press MOFFN.
To exit, press MOFFN.
Listening to messages
Using the base unit
When new messages have been recorded,
N on the base unit flashes.
Press M
N (PLAY).
R During playback, M
N on the base unit
lights.
R If new messages have been recorded, the
base unit plays back new messages.
R If there are no new messages, the base
unit plays back all messages.
Operating the answering system
during playback
Note:
R To switch to the receiver, press M
N.
R You can also use the MPLAYN soft key, if
displayed, to play new messages.
Operating the answering system
MMENUN a MbN: “Answering device” a
MSELECTN
Key
Operation
MjN or MkN
Adjust the receiver/speaker
volume (during playback)
1 or MFN
Repeat message (during
playback)*1
2 or MEN
Skip message (during
playback)
Key
Operation
MjN or MkN
Adjust the speaker
volume
Enter the “Settings” menu
Play new messages
Repeat message*1
Play all messages
Skip message
Play greeting message
N (STOP)
Stop playback
76
Record greeting message
Erase currently playing
message
Turn answering system on
MPAUSEN
Pause message*2
9 or
MSTOPN
Stop recording
Stop playback
Turn answering system off
MERASEN
*1
If pressed within the first 5 seconds of a
message, the previous message is
played.
For assistance, please visit http://shop.panasonic.com/support
67
Answering System for Landline
Key
Operation
*4*3
Erase currently playing
message
*5
Erase all messages
*6
Reset to a pre-recorded
greeting message
*1
If pressed within the first 5 seconds of a
message, the previous message is
played.
To resume playback:
MbN: “Playback” a MSELECTN
You can also erase as follows:
MPAUSEN a MbN: “Erase” a
MSELECTN a MbN: “Yes” a MSELECTN
*2
*3
Press MEDITN repeatedly until the phone
number is shown in the desired format
(page 59).
MCELLN
R The unit starts dialing immediately in
the following situations.
– Only 1 cellular phone is paired.
– A specific line is set to make cellular
calls (page 22).
MbN: Select the desired cellular phone. a
MSELECTN
Erasing all messages
MMENUN#325
MbN: “Yes” a MSELECTN a MOFFN
Calling back (Caller ID subscribers
only)
n Using a landline:
1 Press MPAUSEN during playback.
MbN: “Call back” a MSELECTN
n Using a cellular line:
1 Press MPAUSEN during playback.
MbN: “Call back (Cell)” a
MSELECTN
R The unit starts dialing immediately
in the following situations.
– Only 1 cellular phone is paired.
– A specific line is set to make
cellular calls (page 22).
MbN: Select the desired cellular phone.
a MSELECTN
Editing the number before calling back
n Using a landline:
Press MPAUSEN during playback.
MbN: “Edit & Call” a MSELECTN
Press MEDITN repeatedly until the phone
number is shown in the desired format
(page 59).
n Using a cellular line:
68
Advanced new message
alerting features
Press MPAUSEN during playback.
Audible message alert
This feature allows the base unit to beep to
inform you of a new message arrival when
new messages are recorded. The base unit
beeps 2 times every minute until you listen to
the messages, if the “Base unit beep”
setting is turned on. The default setting is
“Off”.
MMENUN#339
MbN: Select the desired setting. a
MSAVEN a MOFFN
New message alert by a call
This feature allows you to receive a
notification by phone when new messages are
recorded. The base unit calls a phone number
you specify. You can then operate the
answering system remotely to listen to the
new message.
To use this feature, you must:
– store a phone number to which the unit
makes the call to.
– turn on the new message alert setting.
MbN: “Edit & Call” a MSELECTN
For assistance, please visit http://shop.panasonic.com/support
Answering System for Landline
After you answer the new message alert call,
you can listen to messages from that call
(page 69).
This feature is only available for landline.
Important:
R A new message alert is stopped 1 minute
after the unit starts to call. The unit will not
retry the call even if the call is not answered.
Storing a phone number to which the
unit makes an alert call
n From the phonebook:
1 MMENUN#338
MbN: “Notification to” a
MSELECTN a MADDN
MbN: “Phonebook” a MSELECTN
MbN: Select the desired phonebook
entry. a MSAVEN a MOFFN
n By entering a phone number:
1 MMENUN#338
MbN: “Notification to” a
MSELECTN a MADDN
MbN: “Manual” a MSELECTN
Enter the desired number (24 digits
max.). a MOKN a MSELECTN a
MOFFN
Enter the desired name (16 characters
max.). a MOKN
Turning on/off the new message alert
setting
MMENUN#338
MbN: “On/Off” a MSELECTN
MbN: Select the desired setting. a
MSAVEN a MOFFN
Editing the set phone number
MMENUN#338
MbN: “Notification to” a MSELECTN
MMENUN a MbN: “Edit” a MSELECTN
Edit the name if necessary (16 characters
max.). a MOKN
Edit the phone number if necessary (24
digits max.). a MOKN a MSELECTN a
MOFFN
Erasing the set phone number
MMENUN#338
MbN: “Notification to” a MSELECTN
MMENUN a MbN: “Erase” a MSELECTN
MbN: “Yes” a MSELECTN a MOFFN
R The new message alert setting is
turned off.
Activating/inactivating the remote
access code to play messages
If you activate this feature, you must enter the
remote access code (page 70) to play the
new message from the new message alert
call. This is so that unauthorized parties
cannot listen to your messages. The default
setting is “Inactivate”.
– “Inactivate”: You can listen to the
message by pressing 4 to play new
messages (without entering the remote
access code).
– “Activate”: You must enter your remote
access code and then press 4 to play new
message.
MMENUN#338
MbN: “Remote code” a MSELECTN
MbN: Select the desired setting. a
MSAVEN a MOFFN
Listening to messages
After you answer the new message alert, you
can listen to the messages as follows.
n When the remote access code is set to
“Inactivate”:
Press 4 to play the new message during
the announcement.
n When the remote access code is set to
“Activate”:
Enter the remote access code
(page 70) during the announcement.
Press 4 to play the new message.
For assistance, please visit http://shop.panasonic.com/support
69
Answering System for Landline
Note:
R Within 10 seconds after listening to new
messages, you can press #9 during the
call to turn off the new message alert by a
call feature.
R Even if the unit makes a new message alert
call, the handset redial list does not show
the record.
Remote operation
Using a touch-tone phone, you can call your
phone number from outside and access the
unit to listen to messages or change
answering system settings. The unit’s voice
guidance prompts you to press certain dial
keys to perform different operations.
Remote access code
A 3-digit remote access code must be entered
when operating the answering system
remotely. This code prevents unauthorized
parties from listening to your messages
remotely. The default setting is “111”.
Important:
R To prevent unauthorized access to this
product, we recommend that you regularly
change the remote code.
Follow the voice guidance prompts as
necessary or control the unit using
remote commands (page 70).
When finished, hang up.
Voice guidance
n When the English voice guidance is
selected
During remote operation, the unit’s voice
guidance starts and prompts you to press
1 to perform a specific operation, or press
2 to listen to more available operations.
n When the Spanish voice guidance is
selected
To start the voice guidance, press 9. The
voice guidance announces the available
remote commands (page 70).
Note:
R If you do not press any dial keys within 10
seconds after a voice guidance prompt, the
unit disconnects your call.
Remote commands
You can press dial keys to access certain
answering system functions without waiting for
the voice guidance to prompt you.
Key
Operation
MMENUN#306
Enter the desired 3-digit remote access
code. a MSAVEN a MOFFN
Repeat message (during
playback)*1
Skip message (during playback)
Play new messages
Play all messages
Stop playback*2
Start voice guidance*3
Deactivating remote operation
Press * in step 2 on “Remote access code”,
page 70.
R The entered remote access code is deleted.
Using the answering system
remotely
Dial your landline phone number from a
touch-tone phone.
After the greeting message starts, enter
your remote access code.
70
Turn answering system off
*4
Erase currently playing message
*5
Erase all messages
*#
End remote operation
(or hang up)
*1
If pressed within the first 5 seconds of a
message, the previous message is
played.
For assistance, please visit http://shop.panasonic.com/support
Answering System for Landline
*2
*3
For English voice guidance only
For Spanish voice guidance only
Turning on the answering system
remotely
Dial your phone number from a
touch-tone phone.
Let the phone ring 15 times.
R A long beep is heard.
Enter your remote access code within 10
seconds after the long beep.
R The greeting message is played back.
R You can either hang up, or enter your
remote access code again and begin
remote operation (page 70).
Answering system settings
“Toll saver”: The unit’s answering system
answers at the end of the 2nd ring when new
messages have been recorded, or at the end
of the 5th ring when there are no new
messages. If you call your phone from outside
to listen to new messages (page 70), you
know that there are no new messages when
the phone rings for the 3rd time. You can then
hang up without being charged for the call.
MMENUN#211
MbN: Select the desired setting. a
MSAVEN a MOFFN
Caller’s recording time
You can change the maximum message
recording time allowed for each caller. The
default setting is “3 min”.
MMENUN#305
MbN: Select the desired setting. a
MSAVEN a MOFFN
Call screening
Handset / Base unit
While a caller is leaving a message, you can
listen to the call through the unit’s speaker.
To adjust the speaker volume, press MjN or
MkN repeatedly.
N on
You can answer the call by pressing M
the handset or MZN on the base unit*1.
Call screening can be set for each unit. The
default setting is “On”.
For handset setting: MMENUN#310
For base unit setting (using a
handset)*1: MMENUN#*310
MbN: Select the desired setting. a
MSAVEN a MOFFN
KX-TGE670 series: page 4
*1
Number of rings before the unit
answers a call
You can change the number of times the
phone rings “Ring count” before the unit
answers calls. You can select 2 to 7 rings, or
“Toll saver”.
The default setting is “4 rings”.
Selecting “Greeting only”
You can select “Greeting only” which sets
the unit to announce a greeting message to
callers but not record messages.
Select “Greeting only” in step 2 on
“Caller’s recording time”, page 71.
Note:
R When you select “Greeting only”:
– If you do not record your own message,
the unit will play the pre-recorded
greeting-only message asking callers to
call again later.
– If you use your own message, record the
greeting-only message asking callers to
call again later (page 66).
Handset message indicator
You can select whether or not the message
indicator on the handset flashes slowly when
new messages are recorded. The default
setting is “On”.
Important:
R If you stored the voicemail access number
(page 73), the message indicator also
For assistance, please visit http://shop.panasonic.com/support
71
Answering System for Landline
flashes for newly recorded voicemail
messages (page 74).
MMENUN#340
MbN: Select the desired setting. a
MSAVEN a MOFFN
Note:
R While message indicator is on, battery
operating time is shortened (page 14).
72
For assistance, please visit http://shop.panasonic.com/support
Useful Information
Voicemail service for
landline
In addition to your unit’s answering system
you may also have voicemail service from
your phone service provider. Voicemail is
an answering service that may be offered by
your phone service provider. This service can
also record calls when you are unavailable to
answer the phone or when your line is busy.
Messages are recorded on the phone
company system and not on the unit's
answering system.
R To use the voicemail service rather than the
unit’s answering system, turn off the
answering system (page 66).
If you have unit’s answering system set to on
and also the voicemail enabled, the system
with least amount of rings will record the
message first.
Example:
If the unit’s answering system is set to 4 rings
(page 71) and the voicemail answering system
provided by your phone company is set to 6
rings (call your service provider), the unit’s
answering system will record the incoming call
first.
Important:
R You need to store the voicemail access
number to activate the message indicator
(page 71) for voicemail service.
Storing the voicemail (VM)
access number
In order to listen to your voicemail messages,
you must dial your phone service provider’s
voicemail access number. Once you have
stored your voicemail access number, you can
dial it automatically (page 74).
MMENUN#331
Enter your access number (24 digits
max.). a MSAVEN a MOFFN
Note:
R When storing your voicemail access
number and your mailbox password, press
MDN (Pause) to add pauses (page 25)
between the access number and the
password as necessary. Contact your
phone service provider for the required
pause time.
Example:
1-222-333-4444
VM access
number
PPPP
Pauses
8888
Password
To erase the voicemail access number
MMENUN#331
Press and hold MCLEARN until all digits
are erased. a MSAVEN a MOFFN
Voicemail (VM) tone detection
Handset / Base unit*1
*1
KX-TGE670 series: page 4
Your phone service provider sends special
signals (sometimes called “voicemail tones” or
“stutter tones”) to the unit to let you know you
have new voicemail messages. If you hear a
series of dial tones followed by a continuous
dial tone after you press M
N on the handset
or press MZN on the base unit, you have new
voicemail messages. Soon after you hang up
a call or after the phone stops ringing, your
unit checks the phone line to see if new
voicemail messages have been recorded.
Turn this feature off when:
– You do not subscribe to voicemail service.
– Your phone service provider does not send
voicemail tones.
– Your phone is connected to a PBX.
If you are not sure which setting is required,
contact your phone service provider.
Turning VM tone detection on/off
The default setting is “On”.
MMENUN#332
MbN: Select the desired setting. a
MSAVEN a MOFFN
For assistance, please visit http://shop.panasonic.com/support
73
Useful Information
Listening to voicemail messages
When new messages have been recorded:
– “Voicemail msg. via phone co.” is
displayed if message indication service is
available.
– The message indicator on the handset
flashes slowly if the message indicator is
turned on (page 71).
Handset
MMENUN#330
R The speakerphone turns on.
Follow the pre-recorded instructions.
Wall mounting
Note:
R Make sure that the wall and the fixing
method are strong enough to support the
weight of the unit.
Base unit
Lead the AC adaptor cord and telephone
line cord through the hole in the wall
mounting adaptor in the direction of the
arrow.
Tuck the telephone line cord inside the
wall mounting adaptor (A). Connect the
AC adaptor cord and telephone line cord
(B).
1 AC adaptor cord
When finished, hang up.
Note:
R You can also use the MACCESSN soft key,
if displayed, to play new voicemail
messages.
R If the handset still indicates there are new
messages even after you have listened to
all new messages, turn it off by pressing
and holding # until the handset beeps.
Base unit*1
*1
KX-TGE670 series: page 4
To listen to voicemail messages, you have to
dial your voicemail access number manually.
74
For assistance, please visit http://shop.panasonic.com/support
Useful Information
Insert the hooks on the wall mounting
adaptor into holes (1) and (2) on the
base unit.
Mount the unit on a wall then slide down
to secure in place.
1 AC adaptor cord
R This product is compliant with the
following wall phone plate sizes (2
types).
2 83 mm (3 1/4 inches)
3 102 mm (4 inches)
Fit the slots of the unit onto the
corresponding wall phone plate tabs
for (4) and (5) respectively.
Adjust the adaptor to hold the base unit,
then push it in the direction of the arrow
until it clicks into place.
For assistance, please visit http://shop.panasonic.com/support
75
Useful Information
To remove the wall mounting adaptor
While pushing down the release levers (A),
remove the adaptor (B).
Charger
Drive the screws (1) (not supplied) into the
wall.
2 27.2 mm (1 1/16 inches)
76
For assistance, please visit http://shop.panasonic.com/support
Useful Information
Error messages
Display message
Cause/solution
Ask phone
company for
VM access #
R You have not stored the voicemail access number.
Store the number (page 73).
Main unit no power
or
No link. Reconnect base
AC adaptor.
or
No link.
R Confirm the base unit’s AC adaptor is connected to
the unit and the power outlet correctly.
R The handset has lost communication with the base
unit. Move closer to the base unit and try again.
R Unplug the base unit’s AC adaptor to reset the unit.
Reconnect the adaptor and try again.
R The handset’s registration may have been canceled.
Re-register the handset (page 57).
R When “No link.” is displayed during a power
failure, place a handset on the base unit to supply
power to the base unit.
Busy
R No cellular phone is paired to the base unit. Pair a
cellular phone (page 19).
R The called unit is in use.
R Other units are in use and the system is busy. Try
again later.
R The handset you are using is too far from the base
unit. Move closer and try again.
R The automated callers block function is in operation.
Try again later.
R Only 2 Bluetooth devices can be used with the unit at
the same time (for example, 2 cellular lines, or the
headset and 1 cellular line).
R The voice recognition feature could not be activated.
Try again later.
Check tel line
R The supplied telephone line cord has not been
connected yet or not connected properly. Check the
connections (page 12).
R If you do not connect the telephone line cord and use
only cellular lines, set the cellular line only mode
(page 21).
Error!!
R Recording was too short. Try again.
R Someone is using a cellular line or headset. Try
again later.
R The phonebook copy is incomplete (page 60). The
cellular phone is disconnected from the base unit.
Make sure that other Bluetooth devices are not
connected to the cellular phone, and try again.
For assistance, please visit http://shop.panasonic.com/support
77
Useful Information
Display message
Cause/solution
Failed
R Although the unit tried to connect to the cellular
phone or headset, the connection has been failed.
– Someone is using a cellular line or headset. Try
again later.
– Make sure that the cellular phone or headset is
not connected to other Bluetooth devices.
Invalid
R There is no handset registered to the base unit
matching the handset number you entered.
R The handset is not registered to the base unit.
Register the handset (page 57).
Checking
R The automated callers block function is in operation.
Try again later.
Requires
subscription
to Caller ID.
R You must subscribe to a Caller ID service. Once you
receive caller information after subscribing to a Caller
ID service, this message will not be displayed.
Use
rechargeable
battery.
R A wrong type of battery such as alkaline or
manganese was inserted. Use only the rechargeable
Ni-MH batteries noted on page 5, 9.
Troubleshooting
If you still have difficulties after following the instructions in this section, disconnect the base unit’s
AC adaptor, then reconnect the base unit’s AC adaptor. Remove the batteries from the handset,
and then insert them into the handset again.
General use
Problem
Cause/solution
The handset does not turn on
even after installing charged
batteries.
R Place the handset on the base unit or charger to turn on
the handset.
The unit does not work.
78
Make sure the batteries are installed correctly (page 12).
Fully charge the batteries (page 13).
Check the connections (page 12).
Unplug the base unit’s AC adaptor to reset the unit.
Reconnect the adaptor and try again.
R The handset has not been registered to the base unit.
Register the handset (page 57).
For assistance, please visit http://shop.panasonic.com/support
Useful Information
Problem
Cause/solution
I cannot pair a cellular phone to
the base unit.
R Depending on the compatibility of the cellular phone, you
may not be able to pair it to the base unit. Confirm that
your cellular phone supports the hands-free profile (HFP)
specification.
R Confirm that the Bluetooth feature of your cellular phone
is turned on. You may need to turn this feature on
depending on your cellular phone.
R The Bluetooth technology on your cellular phone may not
be functioning normally. Turn off and on your cellular
phone.
R If your cellular phone is already connected to another
Bluetooth device such as a Bluetooth headset, turn it off
or disconnect it from your cellular phone.
R Some cellular phones may require you to enter the
Bluetooth PIN to pairing. Confirm that you entered the
correct PIN.
I cannot connect a cellular
phone to the base unit.
R Confirm that your cellular phone is turned on.
R Confirm that your cellular phone is within base unit range
(page 16).
R Your cellular phone’s Bluetooth feature is turned off. Turn
it on.
R Depending on the state of the wireless environment, such
as the presence of any electrical interference, there may
be a delay even if the auto connection feature is turned
on. You can connect to the base unit manually (page 21).
R The cellular phone has not been paired to the base unit.
Pair the cellular phone (page 19).
R If your cellular phone is already connected to another
Bluetooth device such as a Bluetooth headset or other
Panasonic DECT phone, disconnect the device, then
perform the connecting procedure to the base unit.
R If your cellular phone is already registered on another
Panasonic DECT phone, this function will not work
properly. We strongly recommend that you remove the
registration of this phone on both your cellular phone and
on the other Panasonic DECT phone.
I cannot hear a dial tone.
R Make sure that the CELL indicator lights up (page 17).
R The base unit’s AC adaptor or telephone line cord is not
connected. Check the connections.
R Disconnect the base unit from the telephone line and
connect the line to a known working telephone. If the
working telephone operates properly, contact our service
personnel to have the unit repaired. If the working
telephone does not operate properly, contact your phone
service provider.
The indicator on the handset
flashes slowly.
R New messages have been recorded. Listen to the new
messages (page 67).
R New voicemail messages have been recorded. Listen to
the new voicemail messages (page 74).
For assistance, please visit http://shop.panasonic.com/support
79
Useful Information
Problem
Cause/solution
The base unit beeps.
R New messages have been recorded. Listen to the new
messages (page 67).
Menu list
Problem
Cause/solution
The display is in a language I
cannot read.
R Change the display language (page 17).
I cannot register a handset to a
base unit.
R The maximum number of handsets (6) is already
registered to the base unit. Cancel unused handset
registrations from the base unit (page 57).
Battery recharge
Problem
Cause/solution
The handset beeps and/or
flashes.
R Battery charge is low. Fully charge the batteries (page 13).
I fully charged the batteries, but
–
still flashes,
–
is displayed, or
– the operating time seems to
be shorter.
R Clean the battery ends ( ,
) and the charge contacts
with a dry cloth and charge again.
R It is time to replace the batteries (page 12).
Making/answering calls, intercom
Problem
Cause/solution
R The handset is too far from the base unit. Move closer.
R The base unit’s AC adaptor is not properly connected.
Reconnect AC adaptor to the base unit.
R The handset is not registered to the base unit. Register it
(page 57).
is displayed.
Noise is heard, sound cuts in
and out.
80
R You are using the handset or base unit in an area with
high electrical interference. Re-position the base unit and
use the handset away from sources of interference.
R Move closer to the base unit.
R If you use a DSL/ADSL service, we recommend
connecting a DSL/ADSL filter between the base unit and
the telephone line jack. Contact your DSL/ADSL provider
for details.
For assistance, please visit http://shop.panasonic.com/support
Useful Information
Problem
Cause/solution
The handset or base unit does
not ring.
R The ringer volume for landline is turned off. Adjust the
ringer volume (page 25, 31, 49).
R The ringer volume for cellular line is turned off. Adjust the
ringer volume (page 25, 31, 47).
R The unit which is not selected to ring for cellular calls
does not ring. To change the selection, see page 20.
R Silent mode is turned on. Turn it off (page 54).
R The ringer volume is turned off by pressing and holding
0 ( ). Turn it on again by:
– pressing and holding 0 ( ) until the unit beeps
– changing the volume using navigator key MDN (Vol.)
– pressing MjN repeatedly
I cannot make local calls with
the handset or base unit using
a cellular line.
R You need to add your area code when making cellular
calls. Store your area code in order to automatically add it
to the beginning of the 7-digit phone number when
making cellular calls (page 22).
I cannot make or answer
cellular calls with the handset
or base unit.
R Depending on the cellular phone’s compatibility (page 6),
you may not be able to make or answer cellular calls even
if the cellular phone is connected to the base unit.
R Make sure that the CELL indicator lights up and the
cellular phone is connected to the base unit (page 21).
R Only 2 Bluetooth devices can be used with the unit at the
same time (for example, 2 cellular lines, or the headset
and 1 cellular line).
R The cellular phone is being used separately from your
system.
I can make and answer cellular
calls but cannot hear a sound.
R The Bluetooth technology on your cellular phone may not
be functioning normally. Turn off and on your cellular
phone.
R Disconnect and reconnect the base unit AC adaptor and
try again.
I cannot switch cellular calls
from the unit to the cellular
phone.
R Your cellular phone may not support this feature. Refer to
the operating instructions of your cellular phone.
I cannot make a call using a
landline.
R The dialing mode may be set incorrectly. Change the
setting (page 18).
I cannot make or answer a call.
R An outside line is being used after a cell locator feature is
used.
– To end the call, press MLOCATES CELLN on the base
unit. (KX-TGE660 series: page 4)
I cannot use a cellular line or a
landline.
R The unit can be used to talk on 2 lines at the same time
(for example, 2 cellular lines, or the landline and 1 cellular
line).
I cannot make long distance
calls.
R Make sure that you have long distance service.
For assistance, please visit http://shop.panasonic.com/support
81
Useful Information
Problem
Cause/solution
I cannot use voice paging.
R You cannot use voice paging if other units are in use.
R Voice paging is not available when a range extender
(KX-TGA407) is registered to the base unit.
Caller ID/Talking Caller ID
Problem
Cause/solution
Caller information is not
displayed.
R You must subscribe to Caller ID service. Contact your
phone service provider for details.
R If your unit is connected to any additional telephone
equipment such as a Caller ID box or cordless telephone
line jack, plug the unit directly into the wall jack.
R If you use a DSL/ADSL service, we recommend
connecting a DSL/ADSL filter between the base unit and
the telephone line jack. Contact your DSL/ADSL provider
for details.
R The name display service for landline calls may not be
available in some areas. Contact your phone service
provider for details.
R Other telephone equipment may be interfering with this
unit. Disconnect the other equipment and try again.
Caller information is displayed
or announced late.
R Depending on your phone service provider, the unit may
display or announce the caller’s information at the 2nd
ring or later.
R Move closer to the base unit.
Caller information is not
announced.
R The ringer volume for landline is turned off. Adjust the
ringer volume (page 49).
R The ringer volume for cellular line is turned off. Adjust the
ringer volume (page 47).
R The unit which is not selected to ring for cellular calls
does not announce caller information. To change the
selection, see page 20.
R The Talking Caller ID feature is turned off. Turn it on
(page 50).
R The ring as cell mode is set to “On (without Talking
CID)”. To change the mode, see page 20.
R The number of rings for the answering system is set to “2
rings” or “Toll saver”. Select a different setting
(page 71).
R Your unit does not announce caller information while the
other devices such as headset or handsets are engaged
in a call.
The caller list/incoming phone
numbers are not edited
automatically.
R The Caller ID number auto edit feature is turned off. Turn
it on and try again (page 51).
R You need to call back the edited number to activate Caller
ID number auto edit.
82
For assistance, please visit http://shop.panasonic.com/support
Useful Information
Problem
Cause/solution
I cannot dial the phone number
edited in the caller list.
R The phone number you dialed might have been edited
incorrectly (for example, the long distance “1” or the area
code is missing). Edit the phone number with another
pattern (page 59).
Time on the unit has shifted.
R Incorrect time information from incoming Caller ID
changes the time. Set the time adjustment to “Manual”
(off) (page 50).
The 2nd caller’s information is
not displayed during an outside
call.
R In order to use Caller ID, call waiting, or Call Waiting
Caller ID (CWID), you must first contact your phone
service provider and subscribe to the desired service.
After subscribing, you may need to contact your phone
service provider again to activate this specific service,
even if you already subscribed to both Caller ID and Call
Waiting with Caller ID services (CWID).
Using Bluetooth devices
Problem
Cause/solution
I cannot copy phonebook
entries from a cellular phone.
R Confirm that the cellular phone supports Bluetooth
wireless technology.
R Confirm that the cellular phone supports the Phone Book
Access Profile (PBAP) or Object Push Profile (OPP)
specification.
R If the cellular phone is already connected to another
Bluetooth device such as a Bluetooth headset, turn it off
or disconnect it from the cellular phone.
R Someone is using a cellular line or headset. Try again
later.
R Turn the cellular phone off, then turn it on and try again.
R If an entry is already stored in the unit’s phonebook, the
entry cannot be copied even by selecting another group.
R iPhone does not support individual phonebook copy.
I cannot have a conversation
using the headset.
or
I cannot connect my headset to
the base unit.
R Confirm that the Bluetooth wireless headset supports the
HeadSet Profile (HSP) specification.
R Your Bluetooth headset is not paired. Pair it (page 64).
R Turn your headset off, then turn it on and try again.
R If your headset is already connected to another Bluetooth
device such as your cellular phone, disconnect the
headset from your cellular phone, then perform the
connecting procedure from the base unit.
R Only 2 Bluetooth devices can be used with the unit at the
same time (for example, 2 cellular lines, or the headset
and 1 cellular line).
Noise is heard during a call on
the headset.
R A Bluetooth headset can communicate with the base unit
within a range of approximately 10 m (33 feet). The
connection may be subject to interference from
obstructions such as walls or electronic devices. Move
closer to the base unit.
For assistance, please visit http://shop.panasonic.com/support
83
Useful Information
Problem
Cause/solution
Some headset enhanced
features are not available.
R The base unit does not support enhanced features such
as Last number redial or Call reject.
An error tone is heard when I
try to program the Bluetooth
feature.
R The Bluetooth feature cannot be accessed immediately
after connecting the AC adaptor to the base unit. Wait a
few seconds and try again.
R The headset has not connected to the base unit yet, even
though you performed the connecting procedure setting.
Wait a few seconds and try again.
App alert is not displayed or
announced.
or
Text message alert is not
displayed or announced.
R Confirm that the cellular phone supports the Message
Access Profile (MAP) specification to use text message
alert feature.
R Confirm that the cellular phone supports the Serial Port
Profile (SPP) specification to use App alert feature.
R Confirm that the [Application Alerts manager] setting of
your Android phone is turned on.
R “Alert On/Off” is set to “Off”. Set it to “On”
(page 62).
R “Voice alert” is set to “Off”. Set it to “On” (page 62).
R The Bluetooth device’s Bluetooth notifications setting is
turned off.
R The handset selected to display and/or announce alerts is
in use.
R The Bluetooth device or its corresponding cellular line is
in use.
R Your cellular phone’s Bluetooth feature is turned off. Turn
it on.
R The unit which is not selected to ring for cellular calls
does not ring. To change the selection, see page 20.
Your cellular phone's voice
recognition feature does not
start after pressing M
N.
R This feature may not be available when your cellular
phone is in use. Try again later.
R If you cannot use this feature while your cellular phone is
locked, unlock your phone and try again.
R For some cellular phones, you may be able to set your
phone to allow its voice recognition feature to be used
even when the phone is locked. For more information,
refer to the operating instructions of your cellular phone.
R You may not be able to use this feature if other features
or applications on your cellular phone are using Bluetooth
features. Turn off these features or exit these
applications, and then try again.
84
For assistance, please visit http://shop.panasonic.com/support
Useful Information
Problem
Cause/solution
The desired app does not start
when you try to start the app
using remote voice assist.
R In order to use this feature, your cellular phone's voice
recognition feature must be ready to use.
– iPhone: Make sure Siri is turned on.
– Android: In order to use Google Now, make sure your
cellular phone is registered to your Google account.
R If you have multiple voice recognition features installed in
your cellular phone, you may need to set the desired
voice recognition feature as the default. If you cannot set
the default, delete the other voice recognition features.
Answering system
Problem
Cause/solution
The unit does not record new
messages.
R The answering system is turned off. Turn it on (page 66).
R The answering system does not answer or record calls
from cellular lines.
R The message memory is full. Erase unnecessary
messages (page 67, 68).
R The recording time is set to “Greeting only”. Change
the setting (page 71).
R Your phone service provider’s voicemail service may be
answering your calls before the unit’s answering system
can answer your calls. Change the unit’s number of rings
setting (page 71) to a lower value, or contact your phone
service provider.
R The answering system will not answer incoming calls
while the other devices such as headset or handsets are
engaged in a call.
I cannot operate the answering
system remotely.
R The remote access code is not set. Set the remote
access code (page 70).
R You are entering the wrong remote access code. If you
have forgotten your remote access code, enter the
remote access code setting to check your current code
(page 70).
R The answering system is turned off. Turn it on (page 71).
R You cannot operate the answering system when calling a
cellular phone paired to the base unit.
The unit does not emit the
specified number of rings.
R If the first ring is turned off (“No”) (page 36), the number
of rings decreases by 1 from the specified number of
rings.
For assistance, please visit http://shop.panasonic.com/support
85
Useful Information
Bluetooth PIN
Problem
Cause/solution
I cannot remember the PIN.
R Change the PIN using the following method.
MMENUN#619
*7000
Enter the new 4-digit PIN. a MOKN
Enter the new 4-digit PIN again. a MSAVEN a MOFFN
Voicemail
Problem
Cause/solution
“Voicemail msg. via
phone co.” is shown on the
handset display.
How do I remove this message
from the display?
R This notification is displayed when your phone service
provider’s voicemail service (not the unit’s answering
system) has recorded a message for you. Typically you
can remove this notification from the display by listening
to the message. To listen to the message, dial the
voicemail number provided by your phone service
provider (for most cases, this will be your own phone
number), and follow the voice instructions. Depending on
your phone service provider, you may need to remove all
messages from your voice mailbox to remove the
notification. You can also remove this notification by
pressing and holding # until the unit beeps.
Liquid damage
Problem
Cause/solution
Liquid or other form of moisture
has entered the handset/base
unit.
R Disconnect the AC adaptor and telephone line cord from
the base unit. Remove the batteries from the handset and
leave to dry for at least 3 days. After the handset/base
unit are completely dry, reconnect the AC adaptor and
telephone line cord. Insert the batteries and charge fully
before use. If the unit does not work properly, contact an
authorized service center.
Caution:
R To avoid permanent damage, do not use a microwave oven to speed up the drying process.
86
For assistance, please visit http://shop.panasonic.com/support
Useful Information
FCC and other information
This equipment complies with Part 68 of the
FCC rules and the requirements adopted by
the ACTA. On the bottom of this equipment
is a label that contains, among other
information, a product identifier in the
format US:ACJ----------.
If requested, this number must be provided
to the telephone company.
L Registration No.............(found on the
bottom of the unit)
L Ringer Equivalence No. (REN).......0.1B
advised of your right to file a complaint with
the FCC if you believe it is necessary.
A plug and jack used to connect this
equipment to the premises wiring and
telephone network must comply with the
applicable FCC Part 68 rules and
requirements adopted by the ACTA. A
compliant telephone cord and modular plug
is provided with the product. It is designed
to be connected to a compatible modular
jack that is also compliant.
If trouble is experienced with this
equipment, for repair or warranty
information, please contact a Factory
Service Center or other Authorized Servicer.
If the equipment is causing harm to the
telephone network, the telephone company
may request that you disconnect the
equipment until the problem is resolved.
The REN is used to determine the number
of devices that may be connected to a
telephone line. Excessive RENs on a
telephone line may result in the devices not
ringing in response to an incoming call. In
most but not all areas, the sum of RENs
should not exceed five (5.0). To be certain
of the number of devices that may be
connected to a line, as determined by the
total RENs, contact the local telephone
company. For products approved after July
23, 2001, the REN for the product is part of
the product identifier that has the format
US:AAAEQ##TXXXX. The digits
represented by ## are the REN without a
decimal point (e.g., 03 is a REN of 0.3).
If this equipment causes harm to the
telephone network, the telephone company
will notify you in advance that temporary
discontinuance of service may be required.
But if advance notice isn't practical, the
telephone company will notify the customer
as soon as possible. Also, you will be
The telephone company may make changes
in its facilities, equipment, operations or
procedures that could affect the operation of
the equipment. If this happens the
telephone company will provide advance
notice in order for you to make necessary
modifications to maintain uninterrupted
service.
Connection to party line service is subject to
state tariffs. Contact the state public utility
commission, public service commission or
corporation commission for information.
If your home has specially wired alarm
equipment connected to the telephone line,
ensure the installation of this equipment
does not disable your alarm equipment. If
you have questions about what will disable
alarm equipment, consult your telephone
company or a qualified installer.
This equipment is hearing aid compatible as
defined by the FCC in 47 CFR Section
68.316.
When you hold the phone to your ear, noise
might be heard in your Hearing Aid. Some
Hearing Aids are not adequately shielded
from external RF (radio frequency) energy. If
noise occurs, use an optional headset
accessory or the speakerphone option (if
applicable) when using this phone. Consult
with your audiologist or Hearing Aid
For assistance, please visit http://shop.panasonic.com/support
87
Useful Information
manufacturer about the availability of
Hearing Aids which provide adequate
shielding to RF energy commonly emitted
by digital devices.
WHEN PROGRAMMING EMERGENCY
NUMBERS AND(OR) MAKING TEST
CALLS TO EMERGENCY NUMBERS:
1) Remain on the line and briefly explain to
the dispatcher the reason for the call.
2) Perform such activities in the off-peak
hours, such as early morning or late
evenings.
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful
interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
Privacy of communications may not be
ensured when using this phone.
CAUTION:
Any changes or modifications not expressly
approved by the party responsible for
compliance could void the user’s authority
to operate this device.
NOTE:
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses, and can radiate
radio frequency energy and, if not installed
and used in accordance with the
instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by
turning the equipment off and on, the user is
88
encouraged to try to correct the interference
by one or more of the following measures:
– Reorient or relocate the receiving
antenna.
– Increase the separation between the
equipment and receiver.
– Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.
– Consult the dealer or an experienced
radio/TV technician for help.
Some cordless telephones operate at
frequencies that may cause interference to
nearby TVs and VCRs. To minimize or
prevent such interference, the base of the
cordless telephone should not be placed
near or on top of a TV or VCR. If
interference is experienced, move the
cordless telephone further away from the TV
or VCR. This will often reduce or eliminate
interference.
FCC RF Exposure Warning:
L This product complies with FCC radiation
exposure limits set forth for an
uncontrolled environment.
L To comply with FCC RF exposure
requirements, the base unit must be
installed and operated 20 cm (8 inches)
or more between the product and all
person’s body.
L This product may not be collocated or
operated in conjunction with any other
antenna or transmitter.
L The handset may be carried and operated
with only the specific provided belt-clip.
Other non-tested belt-clips or similar
body-worn accessories may not comply
and must be avoided.
Notice:
L FCC ID can be found inside the battery
compartment or on the bottom of the
units.
For assistance, please visit http://shop.panasonic.com/support
Useful Information
Compliance with TIA-1083 standard:
Telephone handsets identified with this logo
have reduced noise and interference when
used with T-Coil equipped hearing aids and
cochlear implants.
Compatible with
Hearing Aid T-Coil
TIA-1083
For assistance, please visit http://shop.panasonic.com/support
89
Guía Rápida Española
Guía Rápida Española
90
Para obtener ayuda, visite http://shop.panasonic.com/support (solo en inglés)
Guía Rápida Española
Para obtener ayuda, visite http://shop.panasonic.com/support (solo en inglés)
91
Guía Rápida Española
92
Para obtener ayuda, visite http://shop.panasonic.com/support (solo en inglés)
Guía Rápida Española
Para obtener ayuda, visite http://shop.panasonic.com/support (solo en inglés)
93
Guía Rápida Española
94
Para obtener ayuda, visite http://shop.panasonic.com/support (solo en inglés)
Guía Rápida Española
Para obtener ayuda, visite http://shop.panasonic.com/support (solo en inglés)
95
Guía Rápida Española
96
Para obtener ayuda, visite http://shop.panasonic.com/support (solo en inglés)
Guía Rápida Española
Para obtener ayuda, visite http://shop.panasonic.com/support (solo en inglés)
97
Guía Rápida Española
98
Para obtener ayuda, visite http://shop.panasonic.com/support (solo en inglés)
Guía Rápida Española
Para obtener ayuda, visite http://shop.panasonic.com/support (solo en inglés)
99
Appendix
Customer services
Shop
Accessories!
for all your Panasonic gear
Go to
hp://shop.panasonic.com/support
Get everything you need to get the most out of
your Panasonic products
Accessories & Parts for your Camera, Phone, A/V
products, TV, Computers & Networking, Personal
Care, Home Appliances, Headphones, Baeries,
Backup Chargers & more…
Customer Services Directory
For Product Informa!on, Opera!ng Assistance,
Parts, Owner’s Manuals, Dealer and Service info
go to hp://shop.panasonic.com/support
For the hearing or speech impaired TTY: 1- 877-833-8855
As of June 2015
100
For assistance, please visit http://shop.panasonic.com/support
Appendix
Limited Warranty (ONLY FOR U.S.A.)
Panasonic Products Limited Warranty
Limited Warranty Coverage (For USA Only)
If your product does not work properly because of a defect in materials or workmanship,
Panasonic Corporation of North America (referred to as “the warrantor”) will, for the length
of the period indicated on the chart below, which starts with the date of original purchase
(“warranty period”), at its option either (a) repair your product with new or refurbished parts,
(b) replace it with a new or a refurbished equivalent value product, or (c) refund your
purchase price. The decision to repair, replace or refund will be made by the warrantor.
Product or Part Name
Telephone
Parts
One (1) Year
Labor
One (1) Year
During the “Labor” warranty period there will be no charge for labor. During the “Parts”
warranty period, there will be no charge for parts. This Limited Warranty excludes both
parts and labor for non-rechargeable batteries, antennas, and cosmetic parts (cabinet).
This warranty only applies to products purchased and serviced in the United States.
This warranty is extended only to the original purchaser of a new product which was
not sold “as is”.
Mail-In Service--Online Repair Request
Online Repair Request
To submit a new repair request and for quick repair status visit our Web Site at
http://shop.panasonic.com/support
When shipping the unit, carefully pack, include all supplied accessories listed in the
Owner’s Manual, and send it prepaid, adequately insured and packed well in a carton box.
When shipping Lithium Ion batteries please visit our Web Site at
http://shop.panasonic.com/support as Panasonic is committed to providing the most up to
date information. Include a letter detailing the complaint, a return address and provide a
daytime phone number where you can be reached. A valid registered receipt is required
under the Limited Warranty.
IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD, THE PURCHASER WILL
BE REQUIRED TO FURNISH A SALES RECEIPT/PROOF OF PURCHASE INDICATING
DATE OF PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE. CUSTOMER WILL
BE CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF
OF PURCHASE.
For assistance, please visit http://shop.panasonic.com/support
101
Appendix
Limited Warranty Limits and Exclusions
This warranty ONLY COVERS failures due to defects in materials or workmanship,
and DOES NOT COVER normal wear and tear or cosmetic damage. The warranty
ALSO DOES NOT COVER damages which occurred in shipment, or failures which
are caused by products not supplied by the warrantor, or failures which result from
accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty
installation, set-up adjustments, misadjustment of consumer controls, improper
maintenance, power line surge, lightning damage, modification, introduction of sand,
humidity or liquids, commercial use such as hotel, office, restaurant, or other business
or rental use of the product, or service by anyone other than a Factory Service Center
or other Authorized Servicer, or damage that is attributable to acts of God.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER
“LIMITED WARRANTY COVERAGE”.
THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT
OF ANY BREACH OF THIS WARRANTY.
(As examples, this excludes damages for lost time, travel to and from the servicer,
loss of or damage to media or images, data or other memory or recorded content.
The items listed are not exclusive, but for illustration only.)
ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF
MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY.
Some states do not allow the exclusion or limitation of incidental or consequential damages,
or limitations on how long an implied warranty lasts, so the exclusions may not apply to you.
This warranty gives you specific legal rights and you may also have other rights which vary
from state to state. If a problem with this product develops during or after the warranty period,
you may contact your dealer or Service Center. If the problem is not handled to your
satisfaction, then write to:
Consumer Affairs Department
Panasonic Corporation of North America
661 Independence Pkwy
Chesapeake, VA 23320
PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY,
ARE YOUR RESPONSIBILITY.
As of June 2015
102
For assistance, please visit http://shop.panasonic.com/support
Index
Index
3-way conference: 27, 32
Additional handset: 57
Alarm: 53
Answering calls: 25, 30
Answering system
Call screening: 71
Erasing messages: 67, 68, 70
Greeting message: 66
Greeting only: 71
Listening to messages: 67, 70
New message alerting: 68
Number of rings: 71
Recording time: 71
Remote access code: 70
Remote operation: 70
Ring count: 71
Toll saver: 71
Turning on/off: 66
Assist button: 15
Auto intercom: 34
Auto talk: 25, 51
Automated callers block: 38
Baby monitor: 55
Battery: 12, 13
Bluetooth wireless technology
Cellular phone (Link to cell): 19
Headset: 64
Phonebook transfer: 60
Call block: 35
One ring for blocked call: 36
Call share: 26, 32, 52
Call waiting: 26, 31
Call Waiting Caller ID: 26
Caller ID number auto edit: 51, 59
Caller ID service: 58
Caller list: 58
Caller list edit: 59
Cell locator: 33
Cellular calls: 24, 30
Cellular phone
Pairing: 19
Unpairing: 19
Chain dial: 43
CID (Caller ID): 58, 59
Conference calls: 27, 32
Control type: 15
Customer support: 52
Date and time: 17
Dialing mode: 18
Direct command code: 45
Display
Contrast: 51
Language: 17
Eco mode: 14
Equalizer: 26
Error messages: 77
Flash: 26, 31, 52
Groups: 42
Handset
Deregistration: 57
Locator: 33
Name: 57
Registration: 57
HD voice: 22
Hold: 25, 31
Intercom: 33
Key detector: 50, 53
Key tone: 51
Landline calls: 24, 30
Line mode: 52
Link to cell
Alert settings for your DECT
phone: 62
Area code: 22
Auto connection: 20
Cellular line only mode: 21
Cellular line selection: 22
Connection: 21
Link to Cell app: 61
Ring as cell mode: 20
Select unit to ring: 20
Text message (SMS: Short Message
Service) alert: 62
Low battery alert: 18
Making calls: 24, 30
Missed calls: 58
Mute: 26, 31
Pause: 25, 30
Phonebook: 41
PIN: 22
Power failure (power backup
operation): 28
Redialing: 24, 25, 30
Remote voice assist: 63
Ringer ID: 42
Ringer tone: 47, 49
Rotary/pulse service: 26, 31
Silent mode: 54
103
Index
Speed dial: 43
SP-PHONE (Speakerphone): 24
Talking Caller ID: 58
Temporary tone dialing: 26, 31
Time adjustment: 50
Transferring calls: 27, 32
Troubleshooting: 78
TTY: 100
VM (Voicemail): 73
Voice announcement language: 17
Voice paging: 33
Voicemail: 73
Volume
Receiver: 24
Ringer (Base unit): 31, 47, 49
Ringer (Handset): 25, 47, 49
Ringer for intercom call (Handset): 49
Speaker: 24, 30
Wall mounting: 74
104
Notes
105
Notes
106
Notes
107
IMPORTANT!
If your product is not working properly. . .
1 Reconnect AC adaptor to the base unit.
2 Check if telephone line cord is connected.
3 Use rechargeable Ni-MH batteries.
(Alkaline/Manganese/Ni-Cd batteries CANNOT be used.)
4 Read troubleshooting page in the Operating Instructions.
Visit our Web site: http://shop.panasonic.com/support
L FAQ and troubleshooting hints are available.
For your future reference
We recommend keeping a record of the following information to assist with any repair under
warranty.
Serial No.
Date of purchase
(found on the bottom of the base unit)
Name and address of dealer
Attach your purchase receipt here.
Two Riverfront Plaza, Newark, NJ 07102-5490
© Panasonic Corporation 2018
Printed in Malaysia
*PNQX8638ZA*
*PNQX8638ZA*
PNQX8638ZA
PP1117AM0

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Page Count                      : 108
Page Mode                       : UseOutlines
Title                           : ÿþO
Author                          : Panasonic System Networks Co., Ltd.
Subject                         : KX-TGE663/KX-TG854SK/KX-TGE474/KX-TGE475
Creator                         : XSL Formatter V4.3 MR6i (4,3,2013,0121) for Windows
Producer                        : Antenna House PDF Output Library 2.6.0 (Windows)
Create Date                     : 2017:09:15 16:57:55+09:00
Modify Date                     : 2017:09:15 16:57:55+09:00