Panasonic of North America 96NKX-TGL460 DECT 6.0 Base with BT User Manual Operating Instructions English

Panasonic Corporation of North America DECT 6.0 Base with BT Operating Instructions English

User Manual

Operating InstructionsCordless Telephone with Bluetoothand Digital Answering MachineModel No. KX-TGL460KX-TGL462KX-TGL463KX-TG673SK Model shown is KX-TGL460.Before initial use, see “Getting Started”on page 10.Thank you for purchasing a Panasonic product.Please read these operating instructions before using the unit and save them forfuture reference.Consulte “Guía Rápida Española”, página 75.For assistance, visit our Web site: http://shop.panasonic.com/support forcustomers in the U.S.A.Please register your product: http://shop.panasonic.com/supportTGL46x(en)_0925_ver002.pdf 1 2015/09/25 20:59:15
IntroductionModel composition .......................................3Accessory information ..................................3Important InformationFor your safety .............................................6Important safety instructions ........................7For best performance ...................................7Other information .........................................8Specifications ...............................................9Getting StartedSetting up ...................................................10Controls ......................................................12Display icons/Indicators .............................13Language settings ......................................14Date and time .............................................14Recording your greeting message .............14Other settings .............................................15Link to CellLink to cell feature ......................................16Pairing a cellular phone ..............................16Link to cell settings .....................................17Making/Answering CallsMaking cellular calls ...................................20Making landline calls ..................................20Redial feature .............................................21Answering calls ..........................................21Useful features during a call .......................22Intercom .....................................................24Call BlockCall block feature .......................................26Storing unwanted callers ............................26PhonebookPhonebook .................................................29Speed dial ..................................................31ProgrammingMenu list .....................................................33Alarm ..........................................................40Silent mode ................................................41Baby monitor ..............................................42Other programming ....................................43Registering a unit .......................................44Caller ID ServiceUsing Caller ID service ...............................45Caller list ....................................................45Using Bluetooth® DevicesCopying phonebook from a cellular phone(phonebook transfer) ..................................48Link to Cell app ..........................................49Text message (SMS) alert .........................50Alert settings for your DECT phone ...........50Using a Bluetooth wireless headset (optional)for landline calls .........................................51Answering System for LandlineAnswering system for landline ...................53Turning the answering system on/off .........53Greeting message ......................................53Listening to messages ...............................54Advanced new message alertingfeatures ......................................................55Remote operation .......................................57Answering system settings .........................58Useful InformationVoicemail service for landline .....................60Wall mounting ............................................61Error messages ..........................................63Troubleshooting .........................................64FCC and other information .........................72Guía Rápida EspañolaGuía Rápida Española ...............................75AppendixCustomer services .....................................85Limited Warranty (ONLY FOR U.S.A.) .......86IndexIndex...........................................................882Table of ContentsTGL46x(en)_0925_ver002.pdf 2 2015/09/25 20:59:16
Model compositionSeries Model No. Base unit HandsetPart No. Part No. QuantityKX-TGL460seriesKX-TGL460 KX-TGL460 KX-TGLA40 1KX-TGL462 KX-TGL460 KX-TGLA40 2KX-TGL463 KX-TGL460 KX-TGLA40 3KX-TG673SK KX-TGL460 KX-TGLA40 3Accessory informationSupplied accessoriesNo. Accessory item/Part numberQuantityKX-TGL460 KX-TGL462 KX-TGL463KX-TG673SKAAC adaptor/PNLV226Z 1 1 1BTelephone line cord*1 1 1 1CWall mounting adaptor*2 1 1 1DRechargeable batteries*3 2 4 6EHandset cover*4, *5 1 2 3FCharger*6 – 1 2*1 PQJA10075Y (Black cord), PQJA10075Z (Transparent cord)*2 PNKL1061Z1 (Silver), PNKL1061xx (Metallic black)*3 See page 4 for replacement battery information.*4 The handset cover comes attached to the handset.*5 PNYNTGLA40SR (Silver), PNYNTGLA40xx (Metallic black)*6 PNLC1070ZS (Silver), PNLC1070xx (Metallic black)A B C D EF For assistance, please visit http://shop.panasonic.com/support 3IntroductionTGL46x(en)_0925_ver002.pdf 3 2015/09/25 20:59:16
Additional/replacement accessoriesPlease contact your nearest Panasonic dealer for sales information (page 85).Accessory item Model number/SpecificationsRechargeablebatteriesHHR-4DPA*1RTo order, please visit http://shop.panasonic.com/supportBattery type:– Nickel metal hydride (Ni-MH)– 2 x AAA (R03) size for each handsetT-adaptor KX-J66Range extender KX-TGA405*2Key detector KX-TGA20*3*1 Replacement batteries may have a different capacity from that of the supplied batteries.*2 By installing this unit, you can extend the range of your phone system to include areaswhere reception was previously not available. This product can be purchased online. Pleasevisit our Web site: http://shop.panasonic.com/support*3 By registering the key detector (4 max.) to a Panasonic Digital Cordless Phone andattaching it to an easy-to-lose item in advance, you can locate and find the mislaid item towhich the key detector is attached. Please visit our Web site:http://www.panasonic.com/tga20Other informationRDesign and specifications are subject to change without notice.RThe illustrations in these instructions may vary slightly from the actual product.Expanding your phone systemHandset (optional): KX-TGLA40You can expand your phone system byregistering optional handsets (6 max.) to asingle base unit.ROptional handsets may be a different colorfrom that of the supplied handsets.4For assistance, please visit http://shop.panasonic.com/supportIntroductionTGL46x(en)_0925_ver002.pdf 4 2015/09/25 20:59:16
Bluetooth® devicesYou can expand your phone system by pairing the following units to a single base unit.Your Bluetooth cellular phone*1: 2 max.(for cellular calls: page 16)Your Bluetooth headset*1: 1 max.(for a wireless hands-free conversation: page 51)*1 Your cellular phone and headset must be Bluetooth wireless technology compatible. Formore details and the list of compatible cellular phones, please visit our Web site:www.panasonic.com/link2cellTrademarksRThe Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.,and any use of such marks by Panasonic Corporation is under license.RiPhone is a registered trademark of Apple Inc.RAndroid is a trademark of Google Inc.RGmail, Google Calendar are trademarks of Google Inc.RFacebook is trademark of Facebook, Inc.RTwitter is trademark of Twitter Inc.RInstagram is trademark of Instagram, Inc.RBlackBerry® is owned by Research In Motion Limited and is registered in the United Statesand may be pending or registered in other countries. Panasonic is not endorsed, sponsored,affiliated with or otherwise authorized by Research In Motion Limited.RAll other trademarks identified herein are the property of their respective owners.For assistance, please visit http://shop.panasonic.com/support 5IntroductionTGL46x(en)_0925_ver002.pdf 5 2015/09/25 20:59:16
For your safetyTo prevent severe injury and loss of life/property, read this section carefully beforeusing the product to ensure proper and safeoperation of your product.WARNINGPower connectionRUse only the power source marked on theproduct.RDo not overload power outlets andextension cords. This can result in the riskof fire or electric shock.RCompletely insert the AC adaptor/powerplug into the power outlet. Failure to do somay cause electric shock and/or excessiveheat resulting in a fire.RRegularly remove any dust, etc. from theAC adaptor/power plug by pulling it fromthe power outlet, then wiping with a drycloth. Accumulated dust may cause aninsulation defect from moisture, etc.resulting in a fire.RUnplug the product from power outlets if itemits smoke, an abnormal smell, or makesan unusual noise. These conditions cancause fire or electric shock. Confirm thatsmoke has stopped emitting and contact usat http://shop.panasonic.com/supportRUnplug from power outlets and never touchthe inside of the product if its casing hasbeen broken open.RNever touch the plug with wet hands.Danger of electric shock exists.InstallationRTo prevent the risk of fire or electricalshock, do not expose the product to rain orany type of moisture.RDo not place or use this product nearautomatically controlled devices such asautomatic doors and fire alarms. Radiowaves emitted from this product may causesuch devices to malfunction resulting in anaccident.RDo not allow the AC adaptor or telephoneline cord to be excessively pulled, bent orplaced under heavy objects.Operating safeguardsRUnplug the product from power outletsbefore cleaning. Do not use liquid oraerosol cleaners.RDo not disassemble the product.RDo not spill liquids (detergents, cleansers,etc.) onto the telephone line cord plug, orallow it to become wet at all. This maycause a fire. If the telephone line cord plugbecomes wet, immediately pull it from thetelephone wall jack, and do not use.MedicalRConsult the manufacturer of any personalmedical devices, such as pacemakers orhearing aids, to determine if they areadequately shielded from external RF(radio frequency) energy. (The productoperates in the frequency range of 1.92 GHz to 1.93 GHz, and the RFtransmission power is 115 mW (max.).)RDo not use the product in health carefacilities if any regulations posted in thearea instruct you not to do so. Hospitals orhealth care facilities may be usingequipment that could be sensitive toexternal RF energy.CAUTIONInstallation and locationRNever install telephone wiring during anelectrical storm.RNever install telephone line jacks in wetlocations unless the jack is specificallydesigned for wet locations.RNever touch uninsulated telephone wires orterminals unless the telephone line hasbeen disconnected at the network interface.RUse caution when installing or modifyingtelephone lines.RThe AC adaptor is used as the maindisconnect device. Ensure that the ACoutlet is installed near the product and iseasily accessible.6For assistance, please visit http://shop.panasonic.com/supportImportant InformationTGL46x(en)_0925_ver002.pdf 6 2015/09/25 20:59:16
RThis product is unable to make calls when:– the handset batteries need recharging orhave failed.– there is a power failure.BatteryRWe recommend using the batteries notedon page 4. USE ONLY rechargeableNi-MH batteries AAA (R03) size.RDo not mix old and new batteries.RDo not open or mutilate the batteries.Released electrolyte from the batteries iscorrosive and may cause burns or injury tothe eyes or skin. The electrolyte is toxic andmay be harmful if swallowed.RExercise care when handling the batteries.Do not allow conductive materials such asrings, bracelets, or keys to touch thebatteries, otherwise a short circuit maycause the batteries and/or the conductivematerial to overheat and cause burns.RCharge the batteries provided with oridentified for use with this product only, inaccordance with the instructions andlimitations specified in this manual.ROnly use a compatible base unit (orcharger) to charge the batteries. Do nottamper with the base unit (or charger).Failure to follow these instructions maycause the batteries to swell or explode.Attention:A nickel metal hydride battery that isrecyclable powers the product you havepurchased.Please call 1-800-8-BATTERY(1-800-822-8837) for information on how torecycle this battery.Important safetyinstructionsWhen using your product, basic safetyprecautions should always be followed toreduce the risk of fire, electric shock, andinjury to persons, including the following:1. Do not use this product near water forexample, near a bathtub, washbowl,kitchen sink, or laundry tub, in a wetbasement or near a swimming pool.2. Avoid using a telephone (other than acordless type) during an electrical storm.There may be a remote risk of electricshock from lightning.3. Do not use the telephone to report a gasleak in the vicinity of the leak.4. Use only the power cord and batteriesindicated in this manual. Do not dispose ofbatteries in a fire. They may explode.Check with local codes for possible specialdisposal instructions.SAVE THESE INSTRUCTIONSFor best performanceBase unit location/avoiding noiseThe base unit and other compatible Panasonicunits use radio waves to communicate witheach other.RFor maximum coverage and noise-freecommunications, place your base unit:– at a convenient, high, and centrallocation with no obstructions betweenthe handset and base unit in an indoorenvironment.– away from electronic appliances such asTVs, radios, personal computers,wireless devices, or other phones.– facing away from radio frequencytransmitters, such as external antennasof mobile phone cell stations. (Avoidputting the base unit on a bay window ornear a window.)RCoverage and voice quality depends on thelocal environmental conditions.For assistance, please visit http://shop.panasonic.com/support 7Important InformationTGL46x(en)_0925_ver002.pdf 7 2015/09/25 20:59:16
RIf the reception for a base unit location isnot satisfactory, move the base unit toanother location for better reception.EnvironmentRKeep the product away from electrical noisegenerating devices, such as fluorescentlamps and motors.RThe product should be kept free fromexcessive smoke, dust, high temperature,and vibration.RThe product should not be exposed todirect sunlight.RDo not place heavy objects on top of theproduct.RWhen you leave the product unused for along period of time, unplug the product fromthe power outlet.RThe product should be kept away from heatsources such as heaters, kitchen stoves,etc. It should not be placed in rooms wherethe temperature is less than 0 °C (32 °F) orgreater than 40 °C (104 °F). Dampbasements should also be avoided.RThe maximum calling distance may beshortened when the product is used in thefollowing places: Near obstacles such ashills, tunnels, underground, near metalobjects such as wire fences, etc.ROperating the product near electricalappliances may cause interference. Moveaway from the electrical appliances.Routine careRWipe the outer surface of the productwith a soft moist cloth.RDo not use benzine, thinner, or anyabrasive powder.Other informationCAUTION: Risk of explosion if battery isreplaced by an incorrect type. Dispose of usedbatteries according to the instructions.Notice for product disposal, transfer,or returnRThis product can store your private/confidential information. To protect yourprivacy/confidentiality, we recommend thatyou erase information such as phonebookor caller list entries from the memory beforeyou dispose of, transfer, or return theproduct.Notice8For assistance, please visit http://shop.panasonic.com/supportImportant InformationTGL46x(en)_0925_ver002.pdf 8 2015/09/25 20:59:16
SpecificationsRStandard:DECT 6.0 (Digital Enhanced CordlessTelecommunications 6.0)Bluetooth wireless technology 2.1RFrequency range:1.92 GHz to 1.93 GHz (DECT)2.402 GHz to 2.48 GHz (Bluetooth)RRF transmission power:115 mW (max.)RPower source:120 V AC, 60 HzRPower consumption:Base unit:Standby: Approx. 1.1 WMaximum: Approx. 4.0 WCharger:Standby: Approx. 0.1 WMaximum: Approx. 1.8 WROperating conditions:0 °C – 40 °C (32 °F – 104 °F), 20 % – 80 %relative air humidity (dry)For assistance, please visit http://shop.panasonic.com/support 9Important InformationTGL46x(en)_0925_ver002.pdf 9 2015/09/25 20:59:16
Setting upConnectionsRIf you do not connect the telephone linecord and use only cellular lines, set thecellular line only mode to use this unit moreconveniently (page 18).n Base unitConnect the AC adaptor to the unit bypressing the plug firmly.Fasten the cord by hooking it.Connect the AC adaptor to the poweroutlet.Connect the telephone line cord to theunit, then to the single-line telephone jack(RJ11C) until you hear a click.A DSL/ADSL filter (not supplied) isrequired if you have a DSL/ADSL service.Note:RUse only the supplied Panasonic ACadaptor PNLV226.125344n ChargerConnect the AC adaptor to the poweroutlet.1Battery installationRUSE ONLY rechargeable Ni-MH batteriesAAA (R03) size (1).RDo NOT use alkaline/manganese/Ni-Cdbatteries.RConfirm correct polarities ( , ).1RFollow the directions on the display to setup the unit.10 For assistance, please visit http://shop.panasonic.com/support Getting StartedTGL46x(en)_0925_ver002.pdf 10 2015/09/25 20:59:16
Battery chargingCharge for about 7 hours.RConfirm “Charging” is displayed (1).RWhen the batteries are fully charged,“Fully charged” is displayed.1Note when setting upNote for connectionsRThe AC adaptor must remain connected atall times. (It is normal for the adaptor to feelwarm during use.)RThe AC adaptor should be connected to avertically oriented or floor-mounted ACoutlet. Do not connect the AC adaptor to aceiling-mounted AC outlet, as the weight ofthe adaptor may cause it to becomedisconnected.During a power failureThe unit cannot be used to make or receivecalls during a power failure. We recommendconnecting a corded-type telephone that doesnot use an AC adaptor to your telephone line.Note for battery installationRUse the supplied rechargeable batteries.For replacement, we recommend using thePanasonic rechargeable batteries noted onpage 4, 7.Note for battery chargingRIt is normal for the handset to feel warmduring charging.RClean the charge contacts of the handset,base unit, and charger with a soft and drycloth once a month. Before cleaning theunit, disconnect from power outlets and anytelephone line cords. Clean more often ifthe unit is exposed to grease, dust, or highhumidity.Battery levelIcon Battery levelHighMediumLowNeeds charging.EmptyPanasonic Ni-MH batteryperformance (supplied batteries)Operation Operating timeIn continuous use 12 hours max.*1Not in use (standby) 8 days max.*1*1 If eco mode is on.Note:RActual battery performance depends onusage and ambient environment.Intelligent eco modeThis feature automatically reduces handsetpower consumption by suppressing handsettransmission power when the handset is closeto the base unit.RWhen this feature is activated, isdisplayed. However, during a cellular call, is not displayed even though thisfeature is activated.REco mode is turned off when the claritybooster is activated (page 22).For assistance, please visit http://shop.panasonic.com/support 11Getting Started TGL46x(en)_0925_ver002.pdf 11 2015/09/25 20:59:16
ControlsHandsetIKLHMJABEDCFGBelt clip holesSpeakerM N (TALK)MZN (Speakerphone)MjN/MkN (xxx: Volume up/down)Dial keypad (*: TONE)MicrophoneReceiverDisplayMOFFNCharge contactsnControl type Soft keysBy pressing a soft key, you can select thefeature shown directly above it on thedisplay. After a cellular phone is paired,MCELLN is displayed. Navigator key–MDN, MCN, MFN, or MEN: Scroll throughvarious lists and items.–MDN Mute: Put the call on mute.–MFN W: View the phonebook entry.–MEN Redial/CID (Caller ID): View theredial list or caller list.–MCN Call Block: View the call block list.Base unitARBEFDGJHIKLNOMPB CACharge contactsSpeakerMERASEN12 For assistance, please visit http://shop.panasonic.com/support Getting StartedTGL46x(en)_0925_ver002.pdf 12 2015/09/25 20:59:16
MANSWER ON/OFFNANSWER ON/OFF indicator ( )MLOCATORNRYou can locate a misplaced handsetby pressing MLOCATORN.M N (PLAY/STOP)Message indicatorM N (Repeat)MCELL 1N (For registration)CELL 1 indicatorM N (Skip)MCELL 2N (For registration)CELL 2 indicatorWall mounting adaptorDisplay icons/IndicatorsHandset display itemsItem MeaningWithin base unit rangeOut of base unit rangeThe landline is in use.RWhen flashing:The call is put on hold.RWhen flashing rapidly: Anincoming call is now beingreceived.A cellular line is in use.*1RWhen flashing:The cellular call is put onhold.RWhen flashing rapidly:A cellular call is beingreceived.Eco mode is on.*2 (page 11)A cellular phone isconnected.*1 Ready to make/receive cellular calls.RWhen turned off:A cellular phone is notconnected to the baseunit. (page 18)Item Meaning– A cellular call is inprogress on that line.– The cellular line isselected for the setting.Noise reduction is set.(page 23)Equalizer is set. (page 23)ZSpeakerphone is on.(page 20)Ringer volume is off.*3(page 35, 37)Silent mode is on. (page 41)Call sharing mode is off.(page 39)Alarm is on. (page 40)Handset numberBattery levelBlocked call (page 26)Clarity booster is on.*2(page 22)Baby monitor is activated.The name/number displayednext to the icon indicates themonitoring unit. (page 42)In use Answering system is beingused by another handset.Cell1 inuseSomeone is using thecorresponding line.Cell2 inuseC1&C2 inuseLine inuse*1 Corresponding lines (1, 2: cellular line)are indicated next to the item.*2 During a cellular call, the item is notdisplayed even though the feature isactivated.*3 Corresponding lines (1, 2: cellular line, L:landline) are indicated next to the item. Ifall lines are turned off, no line is indicated.For assistance, please visit http://shop.panasonic.com/support 13Getting Started TGL46x(en)_0925_ver002.pdf 13 2015/09/25 20:59:16
CELL indicators on the base unitThe CELL indicators show each cellular linestatus.Status MeaningOn A cellular phone is connected.Ready to make/receivecellular calls.Flashing – The cellular line is in use.– Phonebook entries arebeing copied from acellular phone (page 48).– The base unit is searchingfor the paired cellularphone.– The base unit is pairing acellular phone.– A cellular call is put on hold.FlashingrapidlyA cellular call is beingreceived.Light off – A cellular phone is notpaired to the base unit.– A cellular phone is notconnected to the base unit(page 18).Language settingsDisplay languageYou can select either “English” or“Español” as the display language. Thedefault setting is “English”.1MMENUN#1102MbN: Select the desired setting. aMSAVEN a MOFFNVoice announcement languageYou can select either “English” or“Español” as the voice announcementlanguage of the following features:– the answering system– the Talking Caller IDThe default setting is “English”.1MMENUN#1122MbN: Select the desired setting.3MSAVEN a MOFFNDate and time1MMENUN#1012Enter the current month, date, and yearby selecting 2 digits for each.Example: July 12, 201607 12 163MOKN4Enter the current hour and minute(12-hour clock format) by selecting 2digits for each.Example: 9:3009 305*: Select “AM” or “PM”.6MSAVEN a MOFFNNote:RWhen English is selected as the displaylanguage, 12-hour clock format is used.When Spanish is selected, 24-hour clockformat is used.Recording your greetingmessageYou can record your own greeting messageinstead of using a pre-recorded greetingmessage. See page 53 for details.1MMENUN#3022MbN: “Yes” a MSELECTN3Record a greeting message. a MSTOPNa MOFFN14 For assistance, please visit http://shop.panasonic.com/support Getting StartedTGL46x(en)_0925_ver002.pdf 14 2015/09/25 20:59:16
Other settingsDialing modeIf you cannot make calls, change this settingaccording to your telephone line service. Thedefault setting is “Tone”.“Tone”: For tone dial service.“Pulse”: For rotary/pulse dial service.1MMENUN#1202MbN: Select the desired setting.3MSAVEN a MOFFNFor assistance, please visit http://shop.panasonic.com/support 15Getting Started TGL46x(en)_0925_ver002.pdf 15 2015/09/25 20:59:17
Link to cell featureYou can connect your base unit and cellularphone using Bluetooth wireless technology, sothat you can make or answer cellular callsusing your phone system. This allows you to:– use the unit to talk on cellular calls even ifsome areas of your home have poorcellular reception, simply by placing yourcellular phone in an area with goodreception.– talk on cellular calls even if your cellularphone is in your pocket or bag.– enjoy cordless cellular calls even if yourcellular phone plugged in and charging.Important:RYour cellular phone must support theHands Free Profile (HFP) specification.RYou may pair 2 cellular phones and 1headset.RThe unit can be used to talk on 2 lines atthe same time (for example, 2 cellular lines,or the landline and 1 cellular line).ROnly 2 Bluetooth devices can be used withthe unit at the same time (for example, 2cellular lines, or the headset and 1 cellularline).RLocate your cellular phone near the baseunit. If the cellular phone is too close to thebase unit during a cellular call, you mayhear noise. For best performance, werecommend placing the cellular phonebetween 0.6 m to 3 m (2 feet to 10 feet)away from the base unit.Pairing a cellular phoneImportant:RFor more details and the list of compatiblecellular phones, please visit our Web site:www.panasonic.com/link2cellRBefore pairing a Bluetooth enabled cellularphone to the base unit, make sure that noother Bluetooth device such as a Bluetoothheadset is connected to your cellular phone.1Base unit:Press and hold MCELL 1N or MCELL 2Nfor a few seconds.RAfter the corresponding CELLindicator on the base unit startsflashing, the rest of the proceduremust be completed within 5 minutes.2Your cellular phone:While the corresponding CELLindicator is flashing, follow theinstructions of your cellular phone toenter the pairing mode.RDepending on your cellular phone, itmay ask you to enter the BluetoothPIN (default: “0000”).RThe PassKey is not shown on thebase unit, but you can proceedoperations by following thedirections on your cellular phone.3Base unit:Wait until a long beep sounds.RIt may take more than 10 secondsto complete pairing.RWhen the corresponding CELLindicator lights up, the cellularphone is connected to the base unit.You are ready to make cellular calls.Note:RIf the cellular phone has alreadyregistered to the base unit, it isoverwritten.RMake sure that your cellular phone is setto connect to this product automatically.Refer to your cellular phone’s operatinginstructions.RMake sure you cancel your cellularphone’s current pairing if you want topair it to the other line (page 16).RThe default setting for the alert feature is“On”, so when you pair your cellularphone to the base unit, this feature maybe activated (page 50). (This dependson the version and type of cellular phoneyou are using.)Unpairing a cellular phoneYou can cancel the pairing of a cellular phonethat is stored in the base unit.1For CELL 1: MMENUN#6111For CELL 2: MMENUN#611216 For assistance, please visit http://shop.panasonic.com/supportLink to CellTGL46x(en)_0925_ver002.pdf 16 2015/09/25 20:59:17
2MbN: “Yes” a MSELECTNRWhen the cellular phone is unpaired,the CELL indicator is turned off.3MOFFNLink to cell settingsSelecting which unit receivescellular callsYou can select which unit rings and receivescalls for a cellular line. When “All” isselected, all handsets and the base unit ring.1For CELL 1: MMENUN#6271For CELL 2: MMENUN#62722MbN: Select the desired handset or “All”.a MSAVEN a MOFFNNote:RWhen you select a specific handset toreceive calls for a cellular line, otherhandsets cannot answer the calls.RWhen you change to “All” from anothersetting, the base unit ringer volume alsoreturns to the lowest level even if the ringervolume was changed.RThe units selected with this setting have thealert feature (page 50) applied to them.Ring as cell modeOnce this feature is turned on, the handsetand base unit ring using the same ringer toneas your cellular phone.The following settings are available:–“Off”: Turn this feature off to use theringer tones of the handset and base unit.Caller information is announced dependingon the Talking Caller ID setting (page 37).–“On (with Talking CID)” (default):The handset and base unit use your cellularphone’s ringer tone. Caller information isannounced even if the Talking Caller ID isturned off.–“On (without Talking CID)”: Thehandset and base unit use your cellularphone’s ringer tone. Caller information isnot announced even if the Talking Caller IDis turned on.Important:RTo use this feature, your cellular phonemust support Bluetooth in-band ringtone.Refer to your cellular phone’s operatinginstructions.1For CELL 1: MMENUN#6141For CELL 2: MMENUN#61422MbN: Select the desired setting.3MSAVEN a MOFFNNote:RThe units use the preset ringer tonesinstead of your cellular phone’s ringer tonewhen a cellular call is being received if:– your cellular phone is in silent mode(depending on your cellular phone).– the base unit is in use.– 2 handsets are sharing a landline call.RIf your cellular phone is in silent mode with“On (with Talking CID)” set, the unitannounces caller information even whenTalking Caller ID is turned off (page 37).To use the handset ringer toneinstead of your cellular phone’sringer toneSelect “Off” in step 2, “Ring as cell mode”,page 17.To change the handset ringer tone for acellular line, see page 35.Auto connection to the Bluetoothdevices (cellular phones)After pairing, your Bluetooth devices areconnected to the base unit. If you move theBluetooth devices out of base unit range, theBluetooth devices are disconnected from thebase unit. This feature allows the base unit totry to reconnect the Bluetooth devices atregular intervals when it returns within baseunit range. You can set the interval. Thedefault setting is “1 min”.For assistance, please visit http://shop.panasonic.com/support 17Link to CellTGL46x(en)_0925_ver002.pdf 17 2015/09/25 20:59:17
Important:RWhen 3 Bluetooth devices (2 cellularphones and 1 headset) are paired to thebase unit, only 2 Bluetooth devices can beused with the unit at the same time, and thebase unit loses its connection from otherBluetooth devices. To automatically resumethe connection to Bluetooth devices, leavethe auto connection on.RSome cellular phones lose connection afterusage, please check the specifications ofyour cellular phone for more details.1MMENUN#6322MbN: Select the desired setting.3MSAVEN a MOFFNNote:RSome cellular phones may ask you if youaccept the connection requirement from thebase unit. In that case, select “Off” in step2. Check the specifications of your cellularphone.Connecting/disconnecting thecellular phone manuallyIf you will not be using the paired cellularphone’s link to cell feature temporarily (forexample, you do not want the unit to ringwhen your cellular line receives a call), youcan disconnect your cellular phone from thebase unit. If you want to use it again,reconnect the cellular phone to the base unit.Note:RAfter you disconnect a paired cellularphone from the base unit manually, it willautomatically be connected to the base unitin 30 minutes. If you do not use the link tocell feature anymore, unpair the cellularphone (page 17).RA disconnected cellular phone is notunpaired from the base unit, so pairing it tothe base unit again is unnecessary.1To connect/disconnect:For CELL 1: MMENUN#6251For CELL 2: MMENUN#6252RA long beep sounds.2MOFFNCellular line only mode (If you donot use the landline)If you do not use the landline, we recommendsetting the unit to the cellular line only mode.The default setting is “Off”.Important:RIf you turn on the “Cell line onlymode”, disconnect the telephone line cordfrom the base unit. Otherwise the “Cellline only mode” cannot be activated.1MMENUN#1572To turn on:MbN: “On” a MSELECTN a MbN: “Yes”a MSELECTNTo turn off:MbN: “Off” a MSELECTNNote:ROnce you set this mode, you can use thefollowing buttons to make cellular calls forthe handset, press M/ZN instead ofMCELLN (page 20).ROnce you set this mode, the followingfeatures cannot be used:– Landline features (page 40)– Answering system (page 53)Messages cannot be received.– Voicemail features (page 60)RAfter this mode is turned on or off, the baseunit reboots.– Bluetooth connections from cellularphones or headset are disconnected. Ifthe auto connection is turned on(page 17), the cellular phones arereconnected.– will be displayed on the handsetmomentarily. The handset can be usedonce is displayed.When you use the landline againBefore connecting the telephone line to thebase unit, select “Off” in step 2, “Cellular lineonly mode (If you do not use the landline)”,page 18.18 For assistance, please visit http://shop.panasonic.com/supportLink to CellTGL46x(en)_0925_ver002.pdf 18 2015/09/25 20:59:17
Cellular line selectionThis feature determines which cellular line isselected to make cellular calls when:– you press MCELLN on the handset.– you press M/ZN on the handset whilethe cellular line only mode is turned on.The following settings are available:–“Manual” (handset only: default): You canselect the desired cellular line when makinga call.–“Cellphone 1”*1 (base unit default):CELL 1 is selected.–“Cellphone 2”*1: CELL 2 is selected.1MMENUN#6342MbN: Select the desired setting. aMSAVEN a MOFFN*1 After the Bluetooth device is paired, thedevice name is displayed.Storing your area code (fordialing only a 7-digit phonenumber to make a local call)You need to add your area code when makingcellular calls to a phone number in your area.Once you store your area code, it isautomatically added to the beginning of the7-digit phone number when making cellularcalls.1MMENUN#6332Enter the 3-digit area code.RTo correct a digit, press MCLEARN.3MSAVEN a MOFFNChanging the Bluetooth PIN(Personal Identification Number)The PIN is used to pair cellular phones to thebase unit. The default PIN is “0000”. Toprevent unauthorized access to this product,we recommend that you change the PIN, andkeep it confidential.Important:RPlease make note of your new PIN. Theunit does not reveal the PIN to you. If youforget your PIN, see page 71.1MMENUN#619RIf the unit prompts you to enter the oldPIN (when the default has beenchanged), enter the current 4-digit PIN.2Enter the new 4-digit PIN. a MOKN3Enter the new 4-digit PIN again. aMSAVEN a MOFFNFor assistance, please visit http://shop.panasonic.com/support 19Link to CellTGL46x(en)_0925_ver002.pdf 19 2015/09/25 20:59:17
Making cellular callsImportant:RThe unit can be used to talk on 2 lines atthe same time (for example, 2 cellular lines,or the landline and 1 cellular line).ROnly 2 Bluetooth devices can be used withthe unit at the same time (for example, 2cellular lines, or the headset and 1 cellularline).RBefore making calls, confirm that thecorresponding on the handset isdisplayed (page 13).1Lift the handset and dial the phonenumber.RTo correct a digit, press MCLEARN.2MCELLNRThe unit starts dialing when:– only 1 cellular phone is paired.– a specific line is set to make cellularcalls (page 19).Go to step 4.3MbN: Select the desired cellular phone. aMSELECTN4When you finish talking, press MOFFN orplace the handset on the base unit orcharger.Note:RIn step 1, you can store the dialed phonenumber to the phonebook by pressing andholding MFN W for a few seconds.RTo switch to the speaker, pressM/ZN.To switch back to the receiver, press M/ZN.Adjusting the receiver or speakervolumePress MjN or MkN repeatedly while talking.Note:RThe receiver or speaker volume you set iskept for each line (landline and cellularlines).Making landline calls1Lift the handset and dial the phonenumber.RTo correct a digit, press MCLEARN.2Press M/ZN to use the receiver.3When you finish talking, press MOFFN orplace the handset on the base unit orcharger.Note:RIn step 1, you can store the dialed phonenumber to the phonebook by pressingMSAVEN.Using the speakerphone1Dial the phone number and press andhold M/ZN for a few seconds.2When you finish talking, press MOFFN.Note:RTo switch back to the receiver, press M/ZN.Pause (for PBX/long distance serviceusers)A pause is sometimes required when makingcalls using a PBX or long distance service.When storing a calling card access numberand/or PIN in the phonebook, a pause is alsoneeded (page 31).Example: If you need to dial the line accessnumber “9” when making outside calls with aPBX:19 a MDN (Pause)2Dial the phone number. a M/ZNNote:RA 3.5 second pause is inserted each timeMDN (Pause) is pressed.20 For assistance, please visit http://shop.panasonic.com/supportMaking/Answering CallsTGL46x(en)_0925_ver002.pdf 20 2015/09/25 20:59:17
Redial featureMaking a call using the redial listThe last 20 phone numbers dialed aredisplayed in the redial list (each 48 digitsmax.) according to the redial mode setting.1MEN Redial/CIDRIf there is a call which is not answered,“Missed call” is displayed. Toswitch to the redial list, press MENRedial/CID again.2MbN: Select the desired entry.3nTo make a cellular callMCELLNRThe unit starts dialing when:– only 1 cellular phone ispaired.– a specific line is set to makecellular calls (page 19).MbN: Select the desired cellularphone. a MSELECTNnTo make a landline callM/ZNRedial modeThe unit can display the redial list in one of thefollowing 2 ways by programming.–“Most dialed” (default): The unit showsthe phone numbers in descending order offrequency of the recent calls after the latestcall.–“Recent dialed”: The unit shows thephone numbers in order of time.1MEN Redial/CIDRIf there is a call which is not answered,“Missed call” is displayed. Toswitch to the redial list, press MENRedial/CID again.2MbN: Select the desired entry. a MMENUN3MbN: “Recent dialed” a MSELECTN4MbN: Select the desired setting. aMSAVEN a MOFFNNote:RWhen “Most dialed” in redial mode(page 21) is selected and you make calls tothe same phone number plural times, thenumber of times (example: x5) is displayedfor that entry.Erasing a number in the redial list1MEN Redial/CIDRIf there is a call which is not answered,“Missed call” is displayed. Toswitch to the redial list, press MENRedial/CID again.2MbN: Select the desired entry. a MMENUN3MbN: “Erase” a MSELECTN4MbN: “Yes” a MSELECTN a MOFFNAnswering calls1When the unit rings, lift the handset:To answer a call using the receiver, pressM/ZN.To answer a call using the speakerphone,press and hold M/ZN for a fewseconds.RTo answer a cellular call, you can alsopress MCELLN.2When you finish talking, press MOFFN orplace the handset on the base unit orcharger.Any key answer: You can answer the call bypressing any dial key.Auto talk: You can answer calls simply bylifting the handset (page 39).Temporary handset ringer off: You can turnthe ringer off temporarily by pressing andholding 0 for a few seconds.Adjusting the ringer volumeHandsetPress MjN or MkN repeatedly to select thedesired volume.RTo turn the ringer off, press MkN repeatedly.For assistance, please visit http://shop.panasonic.com/support 21Making/Answering CallsTGL46x(en)_0925_ver002.pdf 21 2015/09/25 20:59:17
Base unitPress MjN or MkN repeatedly to select thedesired volume.RTo turn the ringer off, press and hold MkNuntil the unit beeps.Note:RThe ringer volume you set is kept for eachline (landline and cellular lines).Useful features during acallHold1Press MMENUN during an outside call.2MbN: “Hold” a MSELECTN3To release hold on the cellular line:Press MCELLN.*1RAnother handset user can take the callby pressing MCELLN.*1*1 If you press MCELLN and theselection list is displayed, selectthe desired cellular line and pressMSELECTN.To release hold on the landline:Press M/ZN.RAnother handset user can take the callby pressing M/ZN.Note:RAfter holding for 10 minutes, the call isdisconnected.Mute1Press MDN Mute during a call.2To return to the call, press MDN Mute.Flash for landline callsFlash button allows you to use the specialfeatures of your host PBX such as transferringan extension call, or accessing optionaltelephone services.Note:RTo change the flash time, see page 39.For call waiting or Call WaitingCaller ID service usersTo use call waiting or Call Waiting Caller ID,you must first subscribe with your phoneservice provider.This feature allows you to receive calls whileyou are already talking on the phone. If youreceive a call while on the phone, you will heara call waiting tone.If you subscribe to both Caller ID and CallWaiting with Caller ID services, the 2ndcaller’s information is displayed on the unitthat is in use after you hear the call waitingtone.1Press MACCEPTN to answer the 2nd call.2To switch between calls, press MFLASHN.Note:R MACCEPTN and MFLASHN are soft keysvisible on the display during a call.RPlease contact your phone service providerfor details and availability of this service inyour area.Temporary tone dialing forlandline calls (for rotary/pulseservice users)Press * (TONE) before entering accessnumbers which require tone dialing.Handset clarity boosterThis feature can improve sound clarity whenthe handset is used in an area where theremay be interference. During an outside call,this feature is turned on automatically whennecessary.RWhen this feature is turned on, isdisplayed. However, during a cellular call, is not displayed even though thefeature is activated.22 For assistance, please visit http://shop.panasonic.com/supportMaking/Answering CallsTGL46x(en)_0925_ver002.pdf 22 2015/09/25 20:59:17
Handset noise reductionThis feature allows you to hear the voice ofthe person you are talking to more clearly, byreducing the surrounding noise coming fromthe other party’s telephone.1Press MMENUN while talking.2MbN: “Noise reduction on” or“Noise reduction off” aMSELECTNNote:RThe setting you made is kept for each line(landline and cellular lines).The default settings are as follows:– for landline: “Noise reduction off”– for cellular lines: “Noise reductionon”RDepending on the environment where thishandset is being used, this feature may notbe effective.RThis feature is not available while using thespeakerphone.Handset equalizerThis feature clarifies the voice of the personyou are talking to, producing a morenatural-sounding voice that is easier to hearand understand.1Press MMENUN while talking.2MbN: “Equalizer” a MSELECTN3MbN: Select the desired setting.4Press MOKN to exit.Note:RThe setting you made is kept for each line(landline and cellular lines).RDepending on the condition and quality ofyour telephone line, this feature mayemphasize existing line noise. If it becomesdifficult to hear, turn this feature off.RThis feature is not available while using thespeakerphone.RWhen both the “Equalizer” setting andnoise reduction are activated, isshown on the display.Call shareYou can join an existing outside call.nWhile another unit is on a cellular call:1To join the conversation, pressMCELLN.RYou can join the conversation when:– only 1 cellular phone is paired.– a specific line is set to makecellular calls (page 19).2MbN: Select the corresponding cellularphone. a MSELECTNnWhile another unit is on a landline call:To join the conversation, press M/ZN.Note:RA maximum of 3 parties (including 1 outsideparty) can join a conversation using 2extensions. (3-way conference)RTo prevent other users from joining yourconversations with outside callers, turn callsharing mode off (page 39).Transferring calls, conferencecallsOutside calls can be transferred or aconference call with an outside party can bemade between 2 handsets.1During an outside call, press MMENUN.2MbN: “Intercom” a MSELECTN3MbN: Select the desired unit. a MSELECTN4Wait for the paged party to answer.RIf the paged party does not answer,press MBACKN to return to the outsidecall.5To complete the transfer:Press MOFFN.To establish a conference call:MMENUN a MbN: “Conference” aMSELECTNRTo leave the conference, press MOFFN.The other 2 parties can continue theconversation.RTo put the outside call on hold:MMENUN a MbN: “Hold” aMSELECTNFor assistance, please visit http://shop.panasonic.com/support 23Making/Answering CallsTGL46x(en)_0925_ver002.pdf 23 2015/09/25 20:59:17
To resume the conference: MMENUNa MbN: “Conference” a MSELECTNRTo cancel the conference: MMENUN aMbN: “Stop conference” aMSELECTNYou can continue the conversationwith the outside caller.Transferring a cellular callbetween the handset and acellular phoneTransferring a cellular call from thehandset to a cellular phone1Press MMENUN during a cellular call.2MbN: “Transfer to cell” aMSELECTNRThe cellular call is transferred to thecellular phone.Note:RDepending on your cellular phone type, youmay need to set the cellular phone to beready to talk before transferring. Forexample, if your cellular phone has a topcover, open it beforehand.Transferring a cellular call from acellular phone to the handsetDuring a conversation using a cellular phone,the call cannot be transferred to the handsetby the cellular phone. Perform the followingwith the handset.1During a conversation using a cellularphone, press MCELLN.RThe call is transferred to the handsetwhen:– only 1 cellular phone is paired.– a specific line is set to make cellularcalls (page 19).2MbN: Select the corresponding cellularphone. a MSELECTNRThe call is transferred to the handset.Answering a 2nd callIf you receive a call while talking on the phone,the interrupt tone sounds (page 37) and the2nd caller’s information is displayed if yousubscribe to Caller ID service (page 45).Answering a 2nd call during alandline call1Press MMENUN during a landline call.2MbN: “Hold” a MSELECTN3To answer the 2nd call:Press MCELLN while the 2nd call is beingreceived.4To hang up the 2nd call and return to the1st call (landline call), press MOFFN, thenpress M/ZN.Answering a 2nd call during a cellularcall1Press MMENUN during a cellular call.2MbN: “Hold” a MSELECTN3To answer the 2nd call:Press M/ZN or MCELLN while the 2ndcall is being received.4To hang up the 2nd call and return to the1st call (cellular call), press MOFFN, thenpress MCELLN.*1*1 If you press MCELLN and the selection listis displayed, select the desired cellularline and press MSELECTN.IntercomIntercom calls can be made betweenhandsets.Note:RWhen paging unit(s), the paged unit(s)beeps for 1 minute.RIf you receive an outside call while talkingon the intercom, the interrupt tone sounds(page 37).24 For assistance, please visit http://shop.panasonic.com/supportMaking/Answering CallsTGL46x(en)_0925_ver002.pdf 24 2015/09/25 20:59:17
To answer the call with the handset, pressMOFFN, then press the corresponding linekey.RTo change the ringer volume and ringertone for intercom, see page 37.Making an intercom call1MMENUN a MbN: “Intercom” aMSELECTN2MbN: Select the desired unit or “Voicepaging” a MSELECTNRIf you select “Voice paging”:When you speak into the microphoneafter beep, all handsets are paged byyour voice. The voice paging iscontinued until someone answers thecall or you finish the call.3When you finish talking, press MOFFN.Note:RYou can also use the MINTERCOMN softkey, if displayed, to make intercom calls.RWhile the other units are in use when youtry to use the voice paging, the system isbusy. Try again later.Answering an intercom call1Press M/ZN to answer the page.2When you finish talking, press MOFFN.Turning auto intercom on/offThis feature allows the handset to answerintercom calls automatically when it is called.You do not need to press M/ZN. When thisfeature is set to “On”, the monitoring handsetfor the baby monitor feature (page 43) willalso answer baby monitor calls automatically.The default setting is “Off”.1MMENUN#2732MbN: Select the desired setting. aMSAVEN a MOFFNFor assistance, please visit http://shop.panasonic.com/support 25Making/Answering CallsTGL46x(en)_0925_ver002.pdf 25 2015/09/25 20:59:17
Call block featureYou can press the MCN Call Block key in thefollowing situations to disconnect the currentcall and add a phone number to the call blocklist:– when an incoming call is being received– when an incoming call is being recorded bythe answering system– when talking on an outside callOnce a phone number has been added to thecall block list, the unit will block calls from thatphone number in the future.1Press MCN Call Block under the situationsshown above.2Confirm the call block number and pressMYESN.RThe call block number is stored in thecall block list, “Caller blocked” isdisplayed, and then the call isdisconnected.Note:RIf the call has no phone number, the call isblocked but it is not stored in the call blocklist.RThe call block feature is not available:– for intercom calls or calls received by callwaiting.– when a landline call (or cellular call) isbeing received during a cellular call (orlandline call).RBlocked calls are logged in the caller list.Storing unwanted callersThe unit can block calls by storing the desireditems in the call block list beforehand (CallerID subscribers only).–“Block a single number”: The unitblocks calls from specific phone numbersstored in the call block list.–“Block range of numbers”: The unitblocks calls that begin with a number storedin the call block list, such as a toll-freephone number prefix or certain area codes.–“Block unknown CID”: The unit blockscalls that have no phone number.Single phone numbers and ranges of numberscan be stored in the call block list up to 250items in total.Blocking unwanted callers:When a call is received, the unit rings briefly*1while caller information is being received.If the caller’s phone number matches an entryin the call block list, the unit emits no sound tothe caller, and disconnects the call.*1 If you do not want this one ring to sound,select “No” in “Setting not to ring once forblocked call” (page 27).Storing a single phone numberImportant:RWe recommend storing 10 digits (includingthe area code). If only 7 digits are stored, allnumbers that have the same last 7 digitswill be blocked.Adding call blocked numbers fromthe caller listnWhen a cellular phone is paired:1MEN Redial/CIDRIf the redial list is displayed, pressMEN Redial/CID again to switch tothe caller list.2MbN: Select the desired entry to beblocked. a MSELECTNRTo edit the number:Press * (Edit) repeatedly until thephone number is shown in the10-digit format. a MSAVEN a MbN“Call block” a MSELECTN aGo to step 5.3MSAVEN4MbN: “Call block” a MSELECTN5MbN: “Yes” a MSELECTN6Edit the phone number if necessary(24 digits max.).7MSAVEN a MOFFNnWhen a cellular phone is not paired:1MEN Redial/CIDRIf the redial list is displayed, pressMEN Redial/CID again to switch tothe caller list.26 For assistance, please visit http://shop.panasonic.com/supportCall BlockTGL46x(en)_0925_ver002.pdf 26 2015/09/25 20:59:17
2MbN: Select the desired entry to beblocked. a MMENUNRTo edit the number: MbN: “Edit” aMSELECTNPress MEDITN repeatedly until thephone number is shown in the10-digit format. a MSAVEN a“Call block” a MSELECTN aGo to step 4.3MbN: “Save call block” aMSELECTN4MbN: “Yes” a MSELECTN5Edit the phone number if necessary(24 digits max.).6MSAVEN a MOFFNAdding call blocked numbersmanually1MCN Call Block2MbN: “Block a single number” aMSELECTN3MMENUN a MbN: “Add” a MSELECTN4Enter the phone number (24 digits max.).5MSAVEN a MOFFNStoring a range of number1MCN Call Block2MbN: “Block range of numbers” aMSELECTN3MMENUN a MbN: “Add” a MSELECTN4Enter the desired number (2-8 digits).5MSAVEN a MOFFNBlocking incoming calls thathave no phone numberYou can block calls when no phone number isprovided, such as private callers or out of areacalls.1MCN Call Block2MbN: “Block unknown CID” aMSELECTN3MbN: Select the desired setting. aMSAVEN a MOFFNSetting not to ring once forblocked callIf you do not want the unit to sound one ringfor calls from phone numbers stored in the callblock list, select “No”. The default setting is“Yes”.1MCN Call Block2MbN: “One ring for blocked call”a MSELECTN3MbN: Select the desired setting. aMSAVEN a MOFFNViewing/editing/erasing callblock numbers1MCN Call Block2MbN: “Block a single number” or“Block range of numbers” aMSELECTN3MbN: Select the desired entry.RAfter viewing, press MOFFN to exit.4To edit a number:MEDITN a Edit the number. a MSAVENa MOFFNTo erase a number:MERASEN a MbN: “Yes” a MSELECTNa MOFFNNote:RWhen editing, press the desired dial key toadd digits and press MCLEARN to erasedigits.Erasing all call block numbers1MCN Call Block2MbN: “Block a single number” or“Block range of numbers” aMSELECTN3MMENUN a MbN: “Erase all” aMSELECTN4MbN: “Yes” a MSELECTNFor assistance, please visit http://shop.panasonic.com/support 27Call BlockTGL46x(en)_0925_ver002.pdf 27 2015/09/25 20:59:17
5MbN: “Yes” a MSELECTN a MOFFN28 For assistance, please visit http://shop.panasonic.com/supportCall BlockTGL46x(en)_0925_ver002.pdf 28 2015/09/25 20:59:17
PhonebookYou can add 3,000 names (16 charactersmax.) and phone numbers (24 digits max.) tothe phonebook, and assign each phonebookentry to the desired group (page 30). Thefollowing groups are available:– Group 1: “Home”*1 (default)– Group 2: “Cell 1”*1– Group 3: “Cell 2”*1– Group 4-9: You can change the groupname for each group.*1 For groups 1-3, the group names cannotbe changed.Important:RAll entries can be shared by any registeredhandset.RYou can copy phonebook entries from aBluetooth cellular phone to the unit’sphonebook (page 48).Adding phonebook entries1MFN W a MMENUN2MbN: “Add new entry” a MSELECTN3Enter the party’s name. a MOKN4Enter the party’s phone number. a MOKN5MbN: Select the desired group. aMSELECTN 2 times a MOFFNNote:RIn step 3, you can switch the language forentering characters:# a MbN: Select the desired language. aMOKNTo enter the charactersPress a key on which the characters areprinted repeatedly until the desired characteris displayed.The following keys are used when enteringcharacters.Key OperationMGNSwitch between theuppercase and lowercase (A® a)MFN MENMove the cursorMCLEARNErase the character or numberRTo erase all, press andhold it.RTo enter another character that is locatedon the same dial key, first press MEN tomove the cursor to the next space.RIf you do not press any dial key within 2seconds after entering a character, thecharacter is fixed and the cursor moves tothe next space.Storing a redial list number to thephonebookPhone numbers of up to 24 digits can bestored in the phonebook.1MEN Redial/CIDRIf there is a call which is not answered,“Missed call” is displayed. Toswitch to the redial list, press MENRedial/CID again.2MbN: Select the desired entry. a MMENUN3MbN: “Save” a MSELECTN4To store the name, continue from step 3,“Editing entries”, page 31.Storing caller information to thephonebooknWhen a cellular phone is paired:1MEN Redial/CIDRIf the redial list is displayed, pressMEN Redial/CID again to switch tothe caller list.2MbN: Select the desired entry. aMSELECTNRTo edit the number, press * (Edit)repeatedly until the phone numberis shown in the desired format.3MSAVEN4MbN: “Phonebook” a MSELECTNFor assistance, please visit http://shop.panasonic.com/support 29PhonebookTGL46x(en)_0925_ver002.pdf 29 2015/09/25 20:59:17
5Continue from step 3, “Editing entries”,page 31.nWhen a cellular phone is not paired:1MEN Redial/CIDRIf the redial list is displayed, pressMEN Redial/CID again to switch tothe caller list.2MbN: Select the desired entry. aMMENUNRTo edit the number:MbN: “Edit” a MSELECTNPress MEDITN repeatedly until thephone number is shown in thedesired format. And then, pressMSAVEN. Go to step 3.3MbN: “Save phonebook” aMSELECTN4Continue from step 3, “Editing entries”,page 31.GroupsGroups can help you find entries in thephonebook quickly and easily. You canchange the group name for groups 4-9(“Friends”, “Family”, etc.). By assigningdifferent ringer tones for different groups ofcallers, you can identify who is calling (ringerID), if you have subscribed to Caller ID service.Changing group names/setting ringerID1MFN W a MMENUN2MbN: “Group” a MSELECTN3MbN: Select the desired group. aMSELECTNRIf you selected “Home”, “Cell 1”, or“Cell 2”, go to step 5.4To change group namesMbN: “Group name” a MSELECTN aEdit the name (10 characters max.). aMSAVEN5To set group ringer toneMbN: Select the current setting of thegroup ringer tone. a MSELECTN a MbN:Select the desired ringer tone. a MSAVEN6MOFFNFinding and calling from aphonebook entryOnce you have found the desired entry usingone of the following 4 methods, make a callwith your unit.n Using a cellular line:1MCELLNRThe unit starts dialing when:– only 1 cellular phone is paired.– a specific line is set to make cellularcalls (page 19).2MbN: Select the desired cellular phone. aMSELECTNn Using a landline:M/ZNScrolling through all entries1MFN W2MbN: Select the desired entry.Searching by first character1MFN W2Press the dial key (0 – 9 or #) whichcontains the character you are searchingfor (page 29).3MbN: Scroll through the phonebook ifnecessary.Searching by queryYou can narrow down the search to enter thefirst characters of a name.1MFN W a *2To search for the name, enter the firstcharacters (up to 4) in uppercase(page 29).3MOKN4MbN: Scroll through the phonebook ifnecessary.30 For assistance, please visit http://shop.panasonic.com/supportPhonebookTGL46x(en)_0925_ver002.pdf 30 2015/09/25 20:59:18
Searching by group1MFN W2MGROUPN3MbN: Select the group you want to search.a MSELECTNRIf you select “All groups”, the unitends the group search.4MbN: Select the desired entry.Editing entries1Find the desired entry (page 30).2MMENUN a MbN: “Edit” a MSELECTN3Edit the name if necessary. a MOKN4Edit the phone number if necessary. aMOKN5MbN: Select the desired group (page 30).a MSELECTN 2 times a MOFFNErasing entriesErasing an entry1Find the desired entry (page 30).2MMENUN a MbN: “Erase” a MSELECTN3MbN: “Yes” a MSELECTN a MOFFNErasing all entries1MFN W a MMENUN2MbN: “Erase all” a MSELECTN3MbN: Select the desired group. aMSELECTN4MbN: “Yes” a MSELECTN5MbN: “Yes” a MSELECTN a MOFFNChain dialThis feature allows you to dial phone numbersin the phonebook while you are on a call. Thisfeature can be used, for example, to dial acalling card access number or bank accountPIN that you have stored in the phonebook,without having to dial manually.1During an outside call, press MFN W.2MbN: Select the desired entry.3Press MCALLN to dial the number.Note:RWhen storing a calling card access numberand your PIN in the phonebook as onephonebook entry, press MDN (Pause) to addpauses after the number and PIN asnecessary (page 20).RIf you have rotary/pulse service, you needto press * (TONE) before pressing MFNW in step 1 to change the dialing modetemporarily to tone. When adding entries tothe phonebook, we recommend adding *(TONE) to the beginning of phone numbersyou wish to chain dial (page 29).Speed dialYou can assign 1 phone number to each ofthe dial keys (1 to 9) on the handset.Adding phone numbers to speeddial keysnBy entering phone numbers:1Press and hold the desired speed dialkey (1 to 9). a MADDN2MbN: “Manual” a MSELECTN3Enter the party’s name (16 charactersmax.). a MOKN4Enter the party’s phone number (24digits max.). a MOKN5MSELECTN a MOFFNnFrom the phonebook:1Press and hold the desired speed dialkey (1 to 9). a MADDN2MbN: “Phonebook” a MSELECTN3MbN: Select the desired entry.4MSAVEN a MOFFNFor assistance, please visit http://shop.panasonic.com/support 31PhonebookTGL46x(en)_0925_ver002.pdf 31 2015/09/25 20:59:18
Editing an entry1Press and hold the desired speed dial key(1 to 9). a MMENUN2MbN: “Edit” a MSELECTN3Edit the name if necessary. a MOKN4Edit the phone number if necessary. aMOKN5MSELECTN a MOFFNErasing an entry1Press and hold the desired speed dial key(1 to 9). a MMENUN2MbN: “Erase” a MSELECTN3MbN: “Yes” a MSELECTN a MOFFNViewing an entry/Making a callnUsing a cellular line:1Press and hold the desired speed dialkey (1 to 9).2MCELLNRThe unit starts dialing when:– only 1 cellular phone is paired.– a specific line is set to makecellular calls (page 19).3MbN: Select the desired cellular phone.a MSELECTNnUsing a landline:1Press and hold the desired speed dialkey (1 to 9).2To make a call, press M/ZN.32 For assistance, please visit http://shop.panasonic.com/supportPhonebookTGL46x(en)_0925_ver002.pdf 32 2015/09/25 20:59:18
Menu listTo access the features, there are 2 methods.nScrolling through the display menus1MMENUN2Press MCN or MDN to select the desired main menu. a MSELECTN3Press MCN or MDN to select the desired item from the next sub-menus. a MSELECTN4Press MCN or MDN to select the desired setting. a MSAVENnUsing the direct command code1MMENUN a Enter the desired code.Example: Press MMENUN#101.2Select the desired setting. a MSAVENNote:RTo exit the operation, press MOFFN.RIn the following table, < > indicates the default settings.RIn the following table, indicates the reference page number.RDisplay menu order and sub-menu may vary depending on your model.Display menu tree and direct command code tableMain menu: W “Phonebook”Operation CodeViewing the phonebook entry. #280 30Main menu: “Caller list”Operation CodeViewing the caller list. #213 45Main menu: “Answering device”Sub-menu 1 Sub-menu 2 Settings CodePlay new message – – #323 54Play all message – – #324 54Erase allmessage*1– – #325 55Greeting Record greeting*1 –#302 53Check greeting –#303 54Pre-recorded*1(Reset to pre-recordedgreeting)–#304 54For assistance, please visit http://shop.panasonic.com/support 33ProgrammingTGL46x(en)_0925_ver002.pdf 33 2015/09/25 20:59:18
Sub-menu 1 Sub-menu 2 Settings CodeNew messagealert*1Outgoing call–On/OffOn<Off>#338 56Outgoing call–Notification to–Outgoing call–Remote codeActivate<Inactivate>Base unit beep On<Off>#339 55Settings Ring count*1 Toll saver2-7 rings<4 rings>#211 58Recording time*1 <3 min>1 minGreeting only*2#305 59Remote code*1 <111>#306 57Screen call <On>Off#310 58Answer on*1 – – #327 53Answer off*1 – – #328 53Main menu: “Voicemail access”*3Operation CodeListening to voicemail messages. #330 60Main menu: “Intercom”Operation CodePaging the desired unit. #274 2434 For assistance, please visit http://shop.panasonic.com/supportProgrammingTGL46x(en)_0925_ver002.pdf 34 2015/09/25 20:59:18
Main menu: “Bluetooth”Sub-menu 1 Sub-menu 2 Settings CodeLink to cell–1:Add newdevice*4(for CELL 1)–2:Add newdevice*4(for CELL 2)Connect*1/Disconnect*1–#6251*5 18#6252*6Ringer volume–HandsetOff–6 <6> #6281*5 21#6282*6Ringer volume–Base unit*1Off–6 <1> #G6281*5#G6282*6Ringer tone*7 <Tone 2>*5<Tone 4>*6#6291*5 –#6292*6Select unit toring*1Handset 1-6<All>#6271*5 17#6272*6Ring as cell(limited)*1<On (withTalking CID)>On (withoutTalking CID)Off#6141*5 17#6142*6Alert settings*1–Alert On/Off<On>Off#6101*5 50#6102*6Alert settings*1–Voice alert<On>Off#6031*5 50#6032*6Alert settings*1, *8–Alert tone<Tone 1>*5<Tone 2>*6#6041*5 50#6042*6Pair –#6241*5 16#6242*6Unpair –#6111*5 16#6112*6Phonebooktransfer– – #618 48Headset Add new device*4 –#621 51Connect*1/Disconnect*1–#622 51Pair –#621 51Unpair –#612 51For assistance, please visit http://shop.panasonic.com/support 35ProgrammingTGL46x(en)_0925_ver002.pdf 35 2015/09/25 20:59:18
Sub-menu 1 Sub-menu 2 Settings CodeSettings Auto connect*1 Off<1 min>3 min5 min10 min#632 17Cell area code*1 –#633 19Cell line onlymode*1On<Off>#157 18Cell line select <Manual>Cellphone 1*4Cellphone 2*4#634 19Set PIN*1 <0000>#619 19Internationalcode*1–#117 48Country code*1 –#118Trunk prefix*1 –#119Main menu: “Set date & time”Sub-menu 1 Sub-menu 2 Settings CodeDate and time*1 – – #101 14Memo alarm Alarm1–3 <Off>OnceDailyWeekly#720 40Time adjustment*1, *9 – <Caller ID auto>Manual#226 –Main menu: “Speed dial”Operation CodeViewing the speed dial entry. #261 3136 For assistance, please visit http://shop.panasonic.com/supportProgrammingTGL46x(en)_0925_ver002.pdf 36 2015/09/25 20:59:18
Main menu: “Settings”Sub-menu 1 Sub-menu 2 Settings CodeRing adjustments Ringer volume(Incoming)*3–HandsetOff–6 <6> #160 –Ringer volume(Incoming)–Base unit*1Off–6 <1> #G160 –Intercom ringervolume(Handset)Off–6 <6> #175 –Ringer tone(Incoming)*3, *7, *10(Handset)<Tone 1>#161 –Intercom ringertone*3, *7, *10(Handset)<Tone 3>#163 –Interrupt tone*11 <On>Off#201 24Silent mode–On/OffOn<Off>#238 41Silent mode–Start/End<11:00 PM/06:00AM>#237 41Silent mode–Select groupHomeCell 1Cell 2Group 4-9#241 41Set date & time Date and time*1 –#101 14Memo alarm–Alarm1–3<Off>OnceDailyWeekly#720 40Time adjustment*1, *9 <Caller ID auto>Manual#226 –Talking caller ID Handset <On>Off#162 45Base unit*1 On<Off>#G162For assistance, please visit http://shop.panasonic.com/support 37ProgrammingTGL46x(en)_0925_ver002.pdf 37 2015/09/25 20:59:18
Sub-menu 1 Sub-menu 2 Settings CodeKey detectorsetting*12–1:Add new device(for Detector1)*13–2:Add new device(for Detector2)–3:Add new device(for Detector3)–4:Add new device(for Detector4)Change name*1 Detector1 #6561 –Detector2*14 #6562*14Detector3*14 #6563*14Detector4*14 #6564*14Registration –#6571 –#6572*14#6573*14#6574*14Deregistration –#6581 –#6582*14#6583*14#6584*14Call block*1 Block a singlenumber–#217 26Block range ofnumbers– 27Block unknown CID(CID: Caller ID)Block<Unblock>#240 27One ring forblocked call<Yes>No#173 27Speed dial – – #261 31Record greeting*1 – – #302 53Voicemail*3 Save VM access#*1(VM: Voicemail)–#331 60VM tone detect*1 <On>Off#332 60LCD contrast(Display contrast)– Level 1–4 <2> #145 –Handset name – – #104 43Display name –On<Off>#105 44Redial mode – <Most dialed>Recent dialed#659 xxAuto intercom –On<Off>#273 25Key tone – <On>Off#165 –38 For assistance, please visit http://shop.panasonic.com/supportProgrammingTGL46x(en)_0925_ver002.pdf 38 2015/09/25 20:59:18
Sub-menu 1 Sub-menu 2 Settings CodeCaller ID edit(Caller ID number autoedit)– <On>Off#214 46Auto talk*15 –On<Off>#200 21Set tel line*3 Set dial mode*1 <Tone>Pulse#120 15Set flash time*1, *16 80 ms90 ms100 ms110 ms160 ms200 ms250 ms300 ms400 ms600 ms<700 ms>900 ms#121 22Set line mode*1, *17 A <B>#122 –Call sharing*1 – <On>Off#194 23,xxRegistration Register handset –#130 44Deregistration*2 –#131 44Change language Display <English>Español#110 14Announcement*1 <English>Español#112 14Main menu: “Customer support”Operation CodeDisplaying customer support Web address. #680 –Main menu: “Baby monitor”Sub-menu 1 Sub-menu 2 Settings CodeOn/Off –On<Off>#268 42Sensitivity level – Low<Middle>High#269 43For assistance, please visit http://shop.panasonic.com/support 39ProgrammingTGL46x(en)_0925_ver002.pdf 39 2015/09/25 20:59:18
Main menu: “Key detector”*12Sub-menu 1 Sub-menu 2 Settings CodeSearch – – #655 –Battery check – –*1 If you program these settings using one of the units, you do not need to program the sameitem using another unit.*2 This menu is not displayed when scrolling through the display menus. It is only available indirect command code.*3 When the cellular line only mode is turned on, these menus are not displayed (page 18).*4 After the Bluetooth device is paired, the device name is displayed.*5 For CELL 1*6 For CELL 2*7 The preset melodies in this product (“Tone 3” - “Melody 10”) are used with permission of© 2009 Copyrights Vision Inc.*8 The preset melodies in this product (“Tone 1” and “Tone 2”) are used with permission of© 2013 Copyrights Vision Inc.*9 This feature allows the unit to automatically adjust the date and time each time callerinformation including date and time is received.To turn this feature on, select “Caller ID auto”. To turn this feature off, select“Manual”. (Caller ID subscribers only)To use this feature, set the date and time first (page 14).*10 If you subscribe to a distinctive ring service (such as IDENTA-RING), select a tone (tone 1 or2). If you select a melody, you cannot distinguish lines by their ringers.*11 This tone lets you know when you receive an outside call while you are on another line or anintercom call. If you select “On”, the tone sounds 2 times.*12 This setting is available when you have the key detector (KX-TGA20). Read the installationmanual for more information on the key detector.*13 For models with supplied key detectors, the display shows “1: Detector1”.*14 If you register 2 or more key detectors.*15 If you subscribe to a Caller ID service and want to view the caller’s information after lifting upthe handset to answer a call, turn off this feature.*16 The flash time depends on your telephone exchange or host PBX. Contact your PBXsupplier if necessary. The setting should stay at “700 ms” unless pressing MFLASHN fails topick up the waiting call.*17 Generally, the line mode setting should not be changed. This setting automatically maintainsreceiver volume at the proper level depending on the current telephone line condition. Setthe line mode to “A” if telephone line condition is not good.*18 This setting is available when a cellular phone is paired.AlarmAn alarm sounds at the set time for 1 minuteand is repeated 5 times at 5 minute intervals(snooze function). A text memo can also bedisplayed for the alarm. A total of 3 separatealarm times can be programmed for eachhandset. You can set one of 3 different alarmoptions (once, daily, or weekly) for each alarmtime.Important:RMake sure the unit’s date and time settingis correct (page 14).1MMENUN#72040 For assistance, please visit http://shop.panasonic.com/supportProgrammingTGL46x(en)_0925_ver002.pdf 40 2015/09/25 20:59:18
2MbN: Select the desired alarm. aMSELECTN3MbN: Select the desired alarm option. aMSELECTN“Off”Turns alarm off. Go to step 10.“Once”An alarm sounds once at the set time.“Daily”An alarm sounds daily at the set time.Go to step 5.“Weekly”Alarm sounds weekly at the set time(s).4Proceed with the operation according toyour selection in step 3.nOnce:Enter the desired month and date. aMOKNnWeekly:MbN: Select the desired day of the weekand press MSELECTN. a MOKN5Set the desired time.6*: Select “AM” or “PM”. a MOKN7Enter a text memo (10 characters max.).a MOKN8MbN: Select the desired alarm tone. aMSELECTNRWe recommend selecting a differentringer tone from the one used foroutside calls.9MbN: Select the desired snooze setting.a MSAVEN10 MSELECTN a MOFFNNote:RPress MSTOPN to stop the alarm completely.RWhen the handset is in use, the alarm willnot sound until the handset is in standbymode.RPress any dial key or MSNOOZEN to stopthe sound but keep the snooze functionactivated.RIf you want to make an outside call whenthe snooze function is activated, pleasestop the snooze function before making thecall.Silent modeSilent mode allows you to select a period oftime during which the handset and/or baseunit will not ring for outside calls. This featureis useful for time periods when you do notwant to be disturbed, for example, whilesleeping. Silent mode can be set for each unit.Using the phonebook’s group feature(page 30), you can also select groups ofcallers whose calls override silent mode andring the unit (Caller ID subscribers only).Important:RMake sure the unit’s date and time settingis correct (page 14).RIf you have set the alarm, the alarm soundseven if the silent mode is turned on.Turning silent mode on/off1MMENUN#2382MbN: Select the desired setting. aMSAVENRIf you select “Off”, press MOFFN toexit.3Enter the desired hour and minute youwish to start this feature.4*: Select “AM” or “PM”. a MOKN5Enter the desired hour and minute youwish to end this feature.6*: Select “AM” or “PM”.7MSAVEN a MOFFNChanging the start and end time1MMENUN#2372Continue from step 3, “Turning silentmode on/off”, page 41.Selecting groups to bypass silentmode1MMENUN#241For assistance, please visit http://shop.panasonic.com/support 41ProgrammingTGL46x(en)_0925_ver002.pdf 41 2015/09/25 20:59:18
2MbN: Select the desired group. aMSELECTNR“” is displayed next to the selectedgroup numbers.RTo cancel the selected group:MbN: Select the group. a PressMSELECTN again. “ ” disappears.3MSAVEN a MOFFNBaby monitorThis feature allows you to listen in on a roomwhere another handset is located, allowingyou to easily monitor from different areas ofthe house or place. The monitored handset(placed in a baby’s room, for example) willautomatically call the monitoring handset orthe phone number stored when it detectssound.Important:RYou should perform a test run of the babymonitor procedure to ensure that the babymonitor feature is set correctly. Forexample, test its sensitivity. Check theconnection if you are diverting the babymonitor to an outside line.RThis feature should not be used as asubstitute for a medical or caregiver’ssupervision. It is the caregiver’sresponsibility to stay close enough tohandle any eventuality.Note:RIf the unit is connected to a PBX system,you cannot set the baby monitor.RDuring the monitoring mode, batteryconsumption is faster than usual. Werecommend leaving the monitored handseton the base unit or charger.RThe monitored handset never rings while itis being monitored. If the base unit isplaced near the monitored handset, werecommend turning off the base unit ringervolume (page 35, 37).Setting the baby monitorPerform the setting operation with the handsetto be monitored (for example, the handsetplaced in a baby’s room).To monitor with a unitThe internal baby monitor feature is availablebetween handsets.1MMENUN#2682MbN: “On” a MSELECTN3MbN: Select the desired unit’s number tomonitor with. a MSAVENR“Baby monitor” will be displayed.RThe registered unit’s name/number isdisplayed.Note:RWhen this feature is on, another handsetcan hear the monitored handset by makingan intercom call.To monitor from an outside lineIf you enable this feature, the unit will call apre-programmed phone number when thehandset detects sound. After you answer thecall, you can listen in on the room where thehandset is located.This feature is only available for landline.nFrom the phonebook:1MMENUN#2682MbN: “On” a MSELECTN3MbN: Select “Outgoing call” tomonitor from an outside line. a MADDN4MbN: “Phonebook” a MSELECTN5MbN: Select the phonebook entry. aMSAVENR“Baby monitor” will be displayed.Note:RIf you edit a phonebook entry which isassigned for monitoring, the edited entrydoes not transfer to the monitor.nBy entering phone numbers:1MMENUN#2682MbN: “On” a MSELECTN42 For assistance, please visit http://shop.panasonic.com/supportProgrammingTGL46x(en)_0925_ver002.pdf 42 2015/09/25 20:59:18
3MbN: Select “Outgoing call” tomonitor from an outside line. a MADDN4MbN: “Manual” a MSELECTN5Enter the desired name. a MOKN6Enter the desired number. a MOKNa MSELECTNR“Baby monitor” will be displayed.Turning off the baby monitorThe monitored handset cannot be used whilebaby monitor is set to “On”.1Press MMENUN on the handset beingmonitored.2MbN: “On/Off” a MSELECTN3MbN: “Off” a MSELECTN a MOFFNEditing an outside monitoring number1Press MMENUN on the handset beingmonitored.2MbN: “On/Off” a MSELECTN3MbN: “On” a MSELECTN4MbN: Select the outside line.5MMENUN a MbN: “Edit” a MSELECTN6Edit the name if necessary. a MOKN7Edit the phone number if necessary. aMOKN a MSELECTNErasing an outside monitoringnumber1Press MMENUN on the handset beingmonitored.2MbN: “On/Off” a MSELECTN3MbN: “On” a MSELECTN4MbN: Select the outside line.5MMENUN a MbN: “Erase” a MSELECTN6MbN: “Yes” a MSELECTN a MOFFNBaby monitor sensitivityYou can adjust the sensitivity of the babymonitor. Increase or decrease the sensitivity toadjust the sound level needed to trigger thebaby monitor feature.RThis feature cannot be set during amonitoring call.1Press MMENUN on the handset beingmonitored.2MbN: “Sensitivity level” aMSELECTN3MbN: Select the desired setting. aMSAVEN a MOFFNAnswering the baby monitornWhen monitoring with a handset:Press MN to answer a call.If you want to respond from the monitoringunit, press MMUTEN.RThe monitoring unit will answer callsautomatically when the auto intercomfeature is set to “On” (page 25).Note:RIf you receive an outside call whencommunicating with the monitoredhandset, the interrupt tone sounds.To answer the call, press MOFFN, thenpress MN.nWhen monitoring from an outside line:Answer the call.If you want to respond from your monitoringphone, press #1 using tone dialing.You can turn off the baby monitor featureby pressing #0.Note:RThe unit disconnects the callautomatically after 2 minutes.Other programmingChanging the handset nameThe default handset name is “Handset 1” to“Handset 6”. You can customize the nameof each handset (“Bob”, “Kitchen”, etc.). This isuseful when you make intercom calls betweenhandsets. To display the handset name inFor assistance, please visit http://shop.panasonic.com/support 43ProgrammingTGL46x(en)_0925_ver002.pdf 43 2015/09/25 20:59:18
standby mode, turn on the handset namedisplay feature (page 44).1MMENUN#1042Enter the desired name (10 charactersmax.).3MSAVEN a MOFFNDisplaying the handset nameYou can select whether or not the handsetname is displayed in standby mode. Thedefault setting is “Off”.1MMENUN#1052MbN: Select the desired setting. aMSAVEN a MOFFNRegistering a unitOperating additional unitsAdditional handsetsUp to 6 handsets can be registered to thebase unit.Important:RSee page 4 for information on the availablemodel.Registering a handset to thebase unitThe supplied handset and base unit arepre-registered. If for some reason the handsetis not registered to the base unit, re-registerthe handset.1Handset:MMENUN#1302Base unit:Press and hold MLOCATORN for about 5seconds.RIf all registered handsets start ringing,press MLOCATORN again to stop, thenrepeat this step.3Handset:Press MOKN, then wait until a long beepsounds.Deregistering a handsetA handset can cancel its own registration tothe base unit, or other handsets registered tothe same base unit. This allows the handset toend its wireless connection with the system.1MMENUN#131RAll handsets registered to the base unitare displayed.2MbN: Select the handset you want tocancel. a MSELECTN3MbN: “Yes” a MSELECTN a MOFFN44 For assistance, please visit http://shop.panasonic.com/supportProgrammingTGL46x(en)_0925_ver002.pdf 44 2015/09/25 20:59:18
Using Caller ID serviceImportant:RThis unit is Caller ID compatible. To useCaller ID features, you must subscribe to aCaller ID service. Contact your phoneservice provider for details.Caller ID featuresWhen an outside call is being received, thecaller information is displayed.Caller information for the last 50 callers islogged in the caller list from the most recentcall to the oldest.RIf the unit cannot receive caller information,the following is displayed:–“Out of area”: The caller dials froman area which does not provide a CallerID service.–“Private caller”: The callerrequests not to send caller information.–“Long distance”: The caller makes along distance call.RIf the unit is connected to a PBX system,caller information may not be properlyreceived. Contact your PBX supplier.Missed callsIf a call is not answered, the unit treats it as amissed call. The display shows “Missedcall”.Note:REven when there are unviewed missedcalls, “Missed call” disappears from thestandby display if the following operation isperformed by one of the units:– A handset is replaced on the base unitor charger.– Pressing MOFFN on a handset.Phonebook name displayWhen caller information is received and itmatches a phone number stored in thephonebook, the stored name in thephonebook is displayed and logged in thecaller list.Talking Caller IDThis feature lets you know who is callingwithout looking at the display.To use this feature, you must:– subscribe to a Caller ID service of yourphone service provider.– turn this feature on (page 37, xx).When caller information is received, thehandsets and/or base unit announce thecaller’s name or phone number received fromyour phone service provider following everyring.RName pronunciation may vary. This featuremay not pronounce all names correctly.RCaller ID service has a limit of how manycharacters can be displayed. If the caller’sname is too long, the unit may not be ableto display or announce the entire name.Phonebook name announcementWhen caller information is received and itmatches a phone number stored in thephonebook, the stored name in thephonebook is announced.Caller listImportant:RMake sure the unit’s date and time settingis correct (page 14).Viewing the caller list and callingbackn Using a cellular line1MEN Redial/CIDRIf the redial list is displayed, press MENRedial/CID again to switch to the callerlist.2Press MCN to search from the most recentcall, or MDN to search from the oldest call.3To call back, press MSELECTN.To exit, press MOFFN.4MCELLNRThe unit starts dialing when:– only 1 cellular phone is paired.For assistance, please visit http://shop.panasonic.com/support 45Caller ID ServiceTGL46x(en)_0925_ver002.pdf 45 2015/09/25 20:59:19
– a specific line is set to make cellularcalls (page 19).5MbN: Select the desired cellular phone. aMSELECTNn Using a landline1MEN Redial/CIDRIf the redial list is displayed, press MENRedial/CID again to switch to the callerlist.2Press MCN to search from the most recentcall, or MDN to search from the oldest call.3To call back, press M/ZN.To exit, press MOFFN.Note:RIf the entry has already been viewed oranswered, “ ” is displayed.R or indicates the caller informationwas received from the cellular line.Editing a caller’s phone numberYou can edit a phone number in the caller listby removing its area code and/or the longdistance code “1”.nWhen a cellular phone is paired:1MEN Redial/CIDRIf the redial list is displayed, pressMEN Redial/CID again to switch tothe caller list.2MbN: Select the desired entry. aMSELECTN3Press * (Edit) repeatedly until thephone number is shown in the desiredformat.4Using a cellular line:To make a cellular call, continue fromstep 4, “Viewing the caller list andcalling back”, page 45.Using a landline:M/ZNnWhen a cellular phone is not paired:1MEN Redial/CIDRIf the redial list is displayed, pressMEN Redial/CID again to switch tothe caller list.2MbN: Select the desired entry. aMMENUN3MbN: “Edit” a MSELECTN4Press MEDITN repeatedly until thephone number is shown in the desiredformat.5M/ZNCaller ID number auto edit featureOnce you call back an edited number, the unitwhich was used to call back remembers thearea code and format of the edited number.The next time someone calls from the samearea code, caller information is customized bythe unit as follows:– When the call is being received, the CallerID number is displayed in the same formatas the edited number.– After the call has ended, the caller’s phonenumber is displayed in the same format asthe edited number, when reviewed from thecaller list.For example, you can use this feature to setthe unit to ignore the area code of callers inyour area, so that you can call these localnumbers using caller information withoutdialing the area code.To activate this feature, you must edit an entryin the caller list, then call that number. Afterthat, phone numbers from that caller’s areacode are edited automatically.This feature can be set for each unit(page 39). The default setting is “On”.Note:RPhone numbers from the 4 most recentlyedited area codes are automatically edited.Erasing selected callerinformation1MEN Redial/CIDRIf the redial list is displayed, press MENRedial/CID again to switch to the callerlist.2MbN: Select the desired entry.3MERASEN a MbN: “Yes” a MSELECTNa MOFFN46 For assistance, please visit http://shop.panasonic.com/supportCaller ID ServiceTGL46x(en)_0925_ver002.pdf 46 2015/09/25 20:59:19
Erasing all caller information1MEN Redial/CIDRIf the redial list is displayed, press MENRedial/CID again to switch to the callerlist.2MERASEN a MbN: “Yes” a MSELECTNa MOFFNFor assistance, please visit http://shop.panasonic.com/support 47Caller ID ServiceTGL46x(en)_0925_ver002.pdf 47 2015/09/25 20:59:19
Copying phonebook from acellular phone (phonebooktransfer)You can copy phonebook entries from thepaired cellular phones or other cellular phones(not paired) to the unit’s phonebook. A cellularphone must be compatible with Bluetoothwireless technology.Important:RYour cellular phone must support PhoneBook Access Profile (PBAP) or ObjectPush Profile (OPP) specification.RIf a copied entry has 2 or more phonenumbers, each phone number (6 max.) isstored as a separate entry with the samename.RIf a phonebook entry includes additionaldata such as a picture, that entry may fail tocopy to the base unit.RIf your cellular phone includes internationalcall entries, set the conversion codesbefore copying (page 48).1Handset:MMENUN#6182Handset:To copy from paired cellular phones:MbN: Select the desired cellular phone. aMSELECTNRCopied items are stored to the group(“Cell 1” or “Cell 2”) which thecellular phone is paired to.To copy from other cellular phones(not paired):MbN: “Other cell” a MSELECTN aMbN: Select the group you want to copy to.a MSELECTN3Handset:When “Use the cell totransfer phone book” is displayed:Go to step 4.When “Select mode” menu isdisplayed:MbN: Select “Auto” or “Manual”. aMSELECTN“Auto”: Download all entries from thecellular phone automatically. Go to step 5.“Manual”: Copy entries you selected.R“Select mode” menu is displayedonly when the cellular phone supportsPBAP (Phone Book Access Profile) forBluetooth connection.RSome cellular phones may require youto perform an operation on the cellularphone even if you select “Auto”.4Cellular phone:Follow the instructions of your cellularphone to copy phonebook entries.RFor other cellular phones (not paired),you need to search for and select thebase unit. The Bluetooth PIN (default:“0000”) may be required. If yourcellular phone shows PassKeyconfirmation on its display, follow thedirections to proceed.RThe entries being copied are displayedon the handset.5Handset:Wait until “Completed” is displayed.RYou can continue copying other entriesif necessary.6Handset: MOFFNNote:RSome copied entries may have characterswhich do not exist in the character table(page 29). These characters can bedisplayed but cannot be entered whenediting an entry.RThe unit does not support some characters.If a copied entry includes those characters,they are replaced with other availablecharacters or “H”.RIf you receive a call while copyingphonebook entries, the copying procedurestops. Try again after finishing the call.Setting conversion codesYou must first set the following 3 dialing codesbefore transferring the phonebook from yourcellular phone (each 4 digits max.).–“International code”: An internationalprefix used when you make an internationalcall.–“Country code”: Your country code forinternational calls.48 For assistance, please visit http://shop.panasonic.com/supportUsing Bluetooth® DevicesTGL46x(en)_0925_ver002.pdf 48 2015/09/25 20:59:19
–“Trunk prefix”: A trunk prefix; the initialdigit(s) to be dialed in a domestic call, priorto the area code.1MMENUN2To store “International code”:#117To store “Country code”: #118To store “Trunk prefix”: #1193Enter the desired number. a MSAVENa MOFFNNote:RAfter you copy the entries, confirm that thenumbers were transferred correctly.Link to Cell appFor Android™ usersThe free Link to Cell app helps you integrateyour Android phone with your DECT phone forconvenient use.Important:RYour cellular phone must support SPP(Serial Port Profile) specification.nApplication (App) Alerts On/OffThis feature alerts your DECT phone whenyour paired Android phone receives thefollowing alert information:–[Google Calendar]™–[Email]–[Gmail]™–[Text messages]–[Facebook]–[Twitter]–[Instagram]–[Low Battery] informationYou can turn each type of alert on or off usingthe Link to Cell app. If you turn the alertingapp on, your DECT phone alerts you with thecorresponding information.nPhone SettingsUsing your paired Android phone, you canprogram your Phone Settings for thefollowing features:–[Time adjustment]*1–[Cell line only mode] (page 18)–[International code], [Country code],and [Trunk prefix] (page 48)*1 When your paired Android phone is withinthe base unit’s range, the date and timeinformation is updated on the handsetand base unit’s display, if time adjustmentfeature is activated on your Androidphone.Installing the Link to Cell appDownload links are also available at the webpage below.www.panasonic.net/pcc/support/tel/appalertsStarting the app for the first time1Make sure that your Android device’sBluetooth feature is turned on and thatyour Android device is paired to the baseunit.2Start the Link to Cell app by tapping itsicon.3Follow the on-screen instructions.Important:RFor further information, refer to theinstructions on web page listed above.RTo use this feature, the following settingsare required.–Android phone: Bluetooth must beturned on.For assistance, please visit http://shop.panasonic.com/support 49Using Bluetooth® DevicesTGL46x(en)_0925_ver002.pdf 49 2015/09/25 20:59:19
–Android phone: [Application Alertsmanager]*1 must be turned on.–Handset: “Alert On/Off” must beturned on (page 50).RIf this feature does not work, turn on yourdevice’s Bluetooth feature, unplug the baseunit’s AC adaptor, and then reconnect it.*1 Turning on [Application Alertsmanager]Use the following procedure afterinstalling the Link to Cell app.Android 2.x: Open your device’s[Settings] app. a Tap [Accessibility].a Turn on the [Accessibility] and[Application Alerts manager]checkboxes.Android 4.x: Open your device’s[Settings] app. a Tap [Accessibility].a Turn on [Application Alertsmanager].RequirementsRAn Android device (Android 2.1 or later)Text message (SMS) alertFor iPhone® and BlackBerry® usersThis feature alerts you on your DECT phonewhen your paired cellular phone receives SMSmessages. The Link to Cell app is not requiredfor iPhone and BlackBerry users.Important:RYour cellular phone must support MAP(Message Access Profile) specification.RFor further information, refer to theinstructions on web page listed below:www.panasonic.net/pcc/support/tel/sms/RTo use this feature, the following settingsare required:–iPhone and BlackBerry Phone:Bluetooth must be turned on.–Handset: “Alert On/Off” must beturned on (page 50).RIf this feature does not work, turn on yourdevice’s Bluetooth feature, unplug the baseunit’s AC adaptor, and then reconnect it.Alert settings for yourDECT phoneIf your cellular phone is paired to the base unitand receives notifications, the handset and/orbase unit can alert you:– by briefly displaying a message– by announcement– by sounding alert tonesImportant:RFor Android users: Use the Link to Cell appto enable the desired alerts (page 49).Turning alert on/offOnce this feature is turned on, it will alert youon the handset and base unit when yourcellular phone receives notifications.–“On” (default): The handset and/or baseunit alert you.–“Off”: The handset and/or base unit donot alert you.You can configure this setting using either thebase unit or one of the handsets.1For CELL 1: MMENUN#6101For CELL 2: MMENUN#61022MbN: Select the desired setting. aMSAVEN a MOFFNSetting the voice alertYou can turn on/off the voice alert.–“On” (default): The handset and/or baseunit notify you by voice announcement.–“Off”: Voice announcement is notavailable as alert.You can configure this setting using either thebase unit or one of the handsets.1For CELL 1: MMENUN#6031For CELL 2: MMENUN#60322MbN: Select the desired setting. aMSAVEN a MOFFNSelecting the alert tone1For CELL 1: MMENUN#6041For CELL 2: MMENUN#60422MbN: Select the desired setting.50 For assistance, please visit http://shop.panasonic.com/supportUsing Bluetooth® DevicesTGL46x(en)_0925_ver002.pdf 50 2015/09/25 20:59:19
3MSAVEN a MOFFNUsing a Bluetooth wirelessheadset (optional) forlandline callsBy pairing a Bluetooth headset to the baseunit, you can have a hands-free conversationwirelessly for landline calls.Important:RYour Bluetooth wireless headset mustsupport the HeadSet Profile (HSP)specification.R1 headset can be paired to the base unit.ROnly 2 Bluetooth devices can be used withthe unit at the same time (for example, 2cellular lines, or the headset and 1 cellularline).RFor best performance, we recommendusing a Bluetooth headset within 1 m(3.3 feet) of the base unit. A headset cancommunicate with the base unit within arange of approximately 10 m (33 feet).Pairing a headset to the base unitImportant:RMake sure that the Bluetooth headset is notconnected to any other Bluetooth device.1Your headset:Set your headset to pairing mode.RRefer to the headset operatinginstructions.2Handset:MMENUN#6213If your headset PIN is “0000”, go tostep 4.If your headset PIN is other than“0000”, press MCLEARN, then enter yourheadset PIN.RTypically, default PIN is “0000”. Referto the headset operating instructions.4Press MOKN, then wait until a long beepsounds.5MOFFNRWhen the HEADSET indicator on thebase unit lights up, you are ready touse the headset.Connecting/disconnecting a headsetIf you cannot connect the headset and baseunit using the headset, you can connect usingthe handset.To use your headset with another Bluetoothdevice such as a cellular phone, you mayneed to disconnect it from the base unit.Important:RMake sure that the headset is turned on.1To connect/disconnect:MMENUN#622RA long beep sounds.2MOFFNUnpairing a headsetYou can cancel a pairing of the headset that isstored to the base unit.1MMENUN#6122MbN: “Yes” a MSELECTNRWhen the headset is unpaired, theHEADSET indicator is turned off.3MOFFNOperating a Bluetooth wirelessheadset using a landlineImportant:RRefer to your headset operating instructionsfor headset operations.Answering landline calls with yourheadsetTo answer a landline call, press yourheadset’s button referring to your headsetoperating instructions.When you finish talking, press your headset’sbutton referring to your headset operatinginstructions.For assistance, please visit http://shop.panasonic.com/support 51Using Bluetooth® DevicesTGL46x(en)_0925_ver002.pdf 51 2015/09/25 20:59:19
Note:RIf you cannot hang up the call using yourheadset, press MN (STOP) on the baseunit.Switching between the base unit andyour headsetYou can switch between the base unit andyour headset while listening to messagesrecorded on the base unit answering system.RYou can only switch from the base unit toyour headset.nTo switch to your headset:Turn on the headset referring to yourheadset operating instructions.Call sharing between your headsetand the handsetImportant:RTo activate this feature, you should set callsharing mode to on beforehand (page 39).nWhile the handset is on a landline call:To join the conversation with your headset,press your headset’s button referring toyour headset operating instructions.nWhile your headset is on a landline call:To join the conversation with the handset,press M/ZN.Adjusting your headset receivervolumeBase unitPress MjN or MkN repeatedly while using yourheadset.Note:RDepending on your headset, the receivervolume may not be adjustable.52 For assistance, please visit http://shop.panasonic.com/supportUsing Bluetooth® DevicesTGL46x(en)_0925_ver002.pdf 52 2015/09/25 20:59:19
Answering system forlandlineThe answering system can answer and recordcalls for you when you are unavailable toanswer the phone.You can also set the unit to play a greetingmessage but not to record caller messages byselecting “Greeting only” as the recordingtime setting (page 59).Important:RMake sure the unit’s date and time settingis correct (page 14).Memory capacity (including yourgreeting message)The total recording capacity is about 18minutes. A maximum of 64 messages can berecorded.Note:RWhen message memory becomes full:–“Messages full” is shown on thehandset display.– The ANSWER ON/OFF indicator ( )on the base unit flashes rapidly if theanswering system is turned on.– If you use the pre-recorded greetingmessage, the unit automatically switchesto another pre-recorded greetingmessage asking callers to call againlater.– If you recorded your own greetingmessage, the same message is stillannounced to callers even though theirmessages are not recorded.Turning the answeringsystem on/offBase unitPress MANSWER ON/OFFN to turn on/off theanswering system.Handset1To turn on:MMENUN#327To turn off:MMENUN#3282MOFFNNote for base unit and handset:RWhen the answering system is turned on,the ANSWER ON/OFF indicator ( ) onthe base unit lights up.Greeting messageWhen the unit answers a call, a greetingmessage is played to callers.You can use either:– your own greeting message– a pre-recorded greeting messageRecording your greeting message1MMENUN#3022MbN: “Yes” a MSELECTN3After a beep sounds, hold the handsetabout 20 cm (8 inches) away and speakclearly into the microphone (2 minutesmax.).4Press MSTOPN to stop recording. aMOFFNUsing a pre-recorded greetingmessageThe unit provides 2 pre-recorded greetingmessages:– If you reset to pre-recorded greeting or donot record your own greeting message, theunit plays a pre-recorded greeting askingcallers to leave a message.– If the message recording time (page 59)is set to “Greeting only”, callers’messages are not recorded and the unitplays a different pre-recorded greetingmessage asking callers to call again.For assistance, please visit http://shop.panasonic.com/support 53Answering System for LandlineTGL46x(en)_0925_ver002.pdf 53 2015/09/25 20:59:19
Resetting to a pre-recorded greetingmessageIf you change your own greeting message to apre-recorded one, your own recorded greetingmessage is erased.1MMENUN#3042MYESN a MOFFNPlaying back the greetingmessage1MMENUN#3032To exit, press MOFFN.Listening to messagesImportant:RIf your phone service provider offersvoicemail service, the voicemail servicemay answer calls before the base unit’sbuilt-in answering system has a chance toanswer calls and record messages.In this case, messages you expect to berecorded by the answering system will berecorded on the voicemail service. Formore information, see “For landlinevoicemail service subscribers” (page 58).RWhen using the base unit or handset tolisten to messages, the noise reductionfeature (page 23) is activated automaticallyin spite of the setting ( is notdisplayed).Using the base unitWhen new messages have been recorded,MN on the base unit flashes.Press M N (PLAY).RDuring playback, M N on the base unitlights.RIf new messages have been recorded, thebase unit plays back new messages.RIf there are no new messages, the baseunit plays back all messages.Operating the answering systemduring playbackKey OperationMjN or MkNAdjust the speakervolumeM N Repeat message*1M N Skip messageM N (STOP) Stop playbackMERASENErase currently playingmessage*1 If pressed within the first 5 seconds of amessage, the previous message isplayed.Erasing all messagesPress MERASEN 2 times while the unit is not inuse.Using the handsetWhen new messages have been recorded,“New message” is displayed.1To listen to new messages:MMENUN#323To listen to all messages:MMENUN#3242When finished, press MOFFN.Note:RTo switch to the receiver, press M/ZN.RYou can also use the MPLAYN soft key, ifdisplayed, to play new messages.Operating the answering systemMMENUN a MbN: “Answering device” aMSELECTNKey OperationMjN or MkNAdjust the receiver/speakervolume (during playback)1 or MFNRepeat message (duringplayback)*154 For assistance, please visit http://shop.panasonic.com/supportAnswering System for LandlineTGL46x(en)_0925_ver002.pdf 54 2015/09/25 20:59:19
Key Operation2 or MENSkip message (duringplayback)3Enter the “Settings” menu4Play new messages5Play all messages6Play greeting message76 Record greeting message8Turn answering system onMPAUSENPause message*29 orMSTOPNStop recordingStop playback0Turn answering system off*4*3 Erase currently playingmessage*5 Erase all messages*6 Reset to a pre-recordedgreeting message*1 If pressed within the first 5 seconds of amessage, the previous message isplayed.*2 To resume playback:MbN: “Playback” a MSELECTN*3 You can also erase as follows:MPAUSEN a MbN: “Erase” aMSELECTN a MbN: “Yes” a MSELECTNCalling back (Caller ID subscribersonly)nUsing a landline:1Press MPAUSEN during playback.2MbN: “Call back” a MSELECTNnUsing a cellular line:1Press MPAUSEN during playback.2MbN: “Call back (Cell)” aMSELECTNRThe unit starts dialing when:– only 1 cellular phone is paired.– a specific line is set to makecellular calls (page 19).3MbN: Select the desired cellular phone.a MSELECTNEditing the number before calling backn Using a landline:1Press MPAUSEN during playback.2MbN: “Edit & Call” a MSELECTN3Press MEDITN repeatedly until the phonenumber is shown in the desired format(page 46).4M/ZNn Using a cellular line:1Press MPAUSEN during playback.2MbN: “Edit & Call” a MSELECTN3Press MEDITN repeatedly until the phonenumber is shown in the desired format(page 46).4MCELLNRThe unit starts dialing when:– only 1 cellular phone is paired.– a specific line is set to make cellularcalls (page 19).5MbN: Select the desired cellular phone. aMSELECTNErasing all messages1MMENUN#3252MbN: “Yes” a MSELECTN a MOFFNAdvanced new messagealerting featuresAudible message alertThis feature allows the base unit to beep toinform you of a new message arrival whennew messages are recorded. The base unitbeeps 2 times every minute until you listen tothe messages, if the “Base unit beep”setting is turned on. The default setting is“Off”.1MMENUN#3392MbN: Select the desired setting. aMSAVEN a MOFFNFor assistance, please visit http://shop.panasonic.com/support 55Answering System for LandlineTGL46x(en)_0925_ver002.pdf 55 2015/09/25 20:59:19
New message alert by a callThis feature allows you to receive anotification by phone when new messages arerecorded. The base unit calls a phone numberyou specify. You can then operate theanswering system remotely to listen to thenew message.To use this feature, you must:– store a phone number to which the unitmakes the call to.– turn on the new message alert setting.After you answer the new message alert call,you can listen to messages from that call(page 57).This feature is only available for landline.Important:RA new message alert is stopped 1 minuteafter the unit starts to call. The unit will notretry the call even if the call is not answered.Storing a phone number to which theunit makes an alert callnFrom the phonebook:1MMENUN#3382MbN: “Notification to” aMSELECTN a MADDN3MbN: “Phonebook” a MSELECTN4MbN: Select the desired phonebookentry. a MSAVEN a MOFFNnBy entering a phone number:1MMENUN#3382MbN: “Notification to” aMSELECTN a MADDN3MbN: “Manual” a MSELECTN4Enter the desired name (16 charactersmax.). a MOKN5Enter the desired number (24 digitsmax.). a MOKN a MSELECTN aMOFFNTurning on/off the new message alertsetting1MMENUN#3382MbN: “On/Off” a MSELECTN3MbN: Select the desired setting. aMSAVEN a MOFFNEditing the set phone number1MMENUN#3382MbN: “Notification to” a MSELECTN3MMENUN a MbN: “Edit” a MSELECTN4Edit the name if necessary (16 charactersmax.). a MOKN5Edit the phone number if necessary (24digits max.). a MOKN a MSELECTN aMOFFNErasing the set phone number1MMENUN#3382MbN: “Notification to” a MSELECTN3MMENUN a MbN: “Erase” a MSELECTN4MbN: “Yes” a MSELECTN a MOFFNRThe new message alert setting isturned off.Activating/inactivating the remoteaccess code to play messagesIf you activate this feature, you must enter theremote access code (page 57) to play thenew message from the new message alertcall. This is so that unauthorized partiescannot listen to your messages. The defaultsetting is “Inactivate”.–“Inactivate”: You can listen to themessage by pressing 4 to play newmessages (without entering the remoteaccess code).–“Activate”: You must enter your remoteaccess code and then press 4 to play newmessage.1MMENUN#3382MbN: “Remote code” a MSELECTN3MbN: Select the desired setting. aMSAVEN a MOFFN56 For assistance, please visit http://shop.panasonic.com/supportAnswering System for LandlineTGL46x(en)_0925_ver002.pdf 56 2015/09/25 20:59:19
Listening to messagesAfter you answer the new message alert, youcan listen to the messages as follows.nWhen the remote access code is set to“Inactivate”:Press 4 to play the new message duringthe announcement.nWhen the remote access code is set to“Activate”:1Enter the remote access code(page 57) during the announcement.2Press 4 to play the new message.Note:RWithin 10 seconds after listening to newmessages, you can press #9 during thecall to turn off the new message alert by acall feature.REven if the unit makes a new message alertcall, the handset redial list does not showthe record.Remote operationUsing a touch-tone phone, you can call yourphone number from outside and access theunit to listen to messages or changeanswering system settings. The unit’s voiceguidance prompts you to press certain dialkeys to perform different operations.Remote access codeA 3-digit remote access code must be enteredwhen operating the answering systemremotely. This code prevents unauthorizedparties from listening to your messagesremotely. The default setting is “111”.Important:RTo prevent unauthorized access to thisproduct, we recommend that you regularlychange the remote code.1MMENUN#3062Enter the desired 3-digit remote accesscode.3MSAVEN a MOFFNDeactivating remote operationPress * in step 2 on “Remote access code”,page 57.RThe entered remote access code is deleted.Using the answering systemremotely1Dial your landline phone number from atouch-tone phone.2After the greeting message starts, enteryour remote access code.3Follow the voice guidance prompts asnecessary or control the unit usingremote commands (page 57).4When finished, hang up.Voice guidancenWhen the English voice guidance isselectedDuring remote operation, the unit’s voiceguidance starts and prompts you to press1 to perform a specific operation, or press2 to listen to more available operations.nWhen the Spanish voice guidance isselectedTo start the voice guidance, press 9. Thevoice guidance announces the availableremote commands (page 57).Note:RIf you do not press any dial keys within 10seconds after a voice guidance prompt, theunit disconnects your call.Remote commandsYou can press dial keys to access certainanswering system functions without waiting forthe voice guidance to prompt you.Key Operation1Repeat message (duringplayback)*12Skip message (during playback)4Play new messagesFor assistance, please visit http://shop.panasonic.com/support 57Answering System for LandlineTGL46x(en)_0925_ver002.pdf 57 2015/09/25 20:59:19
Key Operation5Play all messages9Stop playback*2Start voice guidance*30Turn answering system off*4 Erase currently playing message*5 Erase all messages*# End remote operation(or hang up)*1 If pressed within the first 5 seconds of amessage, the previous message isplayed.*2 For English voice guidance only*3 For Spanish voice guidance onlyTurning on the answering systemremotely1Dial your phone number from atouch-tone phone.2Let the phone ring 15 times.RA long beep is heard.3Enter your remote access code within 10seconds after the long beep.RThe greeting message is played back.RYou can either hang up, or enter yourremote access code again and beginremote operation (page 57).Answering system settingsCall screeningWhile a caller is leaving a message, you canlisten to the call through the unit’s speaker.To adjust the speaker volume, press MjN orMkN repeatedly.You can answer the call by pressing M/ZNon the handset.Call screening can be set for each handset.The default setting is “On”.1MMENUN#3102MbN: Select the desired setting. aMSAVEN a MOFFNNumber of rings before the unitanswers a callYou can change the number of times thephone rings “Ring count” before the unitanswers calls. You can select 2 to 7 rings, or“Toll saver”.The default setting is “4 rings”.“Toll saver”: The unit’s answering systemanswers at the end of the 2nd ring when newmessages have been recorded, or at the endof the 5th ring when there are no newmessages. If you call your phone from outsideto listen to new messages (page 57), youknow that there are no new messages whenthe phone rings for the 3rd time. You can thenhang up without being charged for the call.1MMENUN#2112MbN: Select the desired setting. aMSAVEN a MOFFNFor landline voicemail servicesubscribersIf you subscribe to a flat-rate service packagethat includes Caller ID, call waiting, voicemail,and unlimited local/regional/long distancecalls, please note the following:RTo use the voicemail service provided byyour phone service provider rather than theunit’s answering system, turn off theanswering system (page 53).RTo use this unit’s answering system ratherthan the voicemail service provided by yourphone service provider, please contact yourphone service provider to deactivate yourvoicemail service.If your phone service provider cannot dothis:– Set this unit’s “Ring count” setting sothat this unit’s answering systemanswers calls before the voicemailservice of your phone service providerdoes. It is necessary to check thenumber of rings required to activate thevoicemail service provided by yourphone service provider before changingthis setting.– Change the number of rings of thevoicemail service so that the answering58 For assistance, please visit http://shop.panasonic.com/supportAnswering System for LandlineTGL46x(en)_0925_ver002.pdf 58 2015/09/25 20:59:19
system can answer the call first. To doso, contact your phone service provider.Caller’s recording timeYou can change the maximum messagerecording time allowed for each caller. Thedefault setting is “3 min”.1MMENUN#3052MbN: Select the desired setting. aMSAVEN a MOFFNSelecting “Greeting only”You can select “Greeting only” which setsthe unit to announce a greeting message tocallers but not record messages.Select “Greeting only” in step 2 on“Caller’s recording time”, page 59.Note:RWhen you select “Greeting only”:– If you do not record your own message,the unit will play the pre-recordedgreeting-only message asking callers tocall again later.– If you use your own message, record thegreeting-only message asking callers tocall again later (page 53).For assistance, please visit http://shop.panasonic.com/support 59Answering System for LandlineTGL46x(en)_0925_ver002.pdf 59 2015/09/25 20:59:19
Voicemail service forlandlineVoicemail is an automatic answering serviceoffered by your phone service provider. Afteryou subscribe to this service, your phoneservice provider’s voicemail system answerscalls for you when you are unavailable toanswer the phone or when your line is busy.Messages are recorded by your phone serviceprovider, not your telephone. Please contactyour phone service provider for details of thisservice.Important:RTo use the voicemail service provided byyour phone service provider rather than theunit’s answering system, turn off theanswering system (page 53). For details,see page 58.Storing the voicemail (VM)access numberIn order to listen to your voicemail messages,you must dial your phone service provider’svoicemail access number. Once you havestored your voicemail access number, you candial it automatically (page 60).1MMENUN#3312Enter your access number (24 digitsmax.). a MSAVEN a MOFFNNote:RWhen storing your voicemail accessnumber and your mailbox password, pressMDN (Pause) to add pauses (page 20)between the access number and thepassword as necessary. Contact yourphone service provider for the requiredpause time.Example:1-222-333-4444VM access numberPauses PasswordPPPP 8888To erase the voicemail access number1MMENUN#3312Press and hold MCLEARN until all digitsare erased. a MSAVEN a MOFFNVoicemail (VM) tone detectionYour phone service provider sends specialsignals (sometimes called “voicemail tones” or“stutter tones”) to the unit to let you know youhave new voicemail messages. If you hear aseries of dial tones followed by a continuousdial tone after you press M/ZN, you havenew voicemail messages. Soon after youhang up a call or after the phone stops ringing,your unit checks the phone line to see if newvoicemail messages have been recorded.Turn this feature off when:– You do not subscribe to voicemail service.– Your phone service provider does not sendvoicemail tones.– Your phone is connected to a PBX.If you are not sure which setting is required,contact your phone service provider.Turning VM tone detection on/offThe default setting is “On”.1MMENUN#3322MbN: Select the desired setting. aMSAVEN a MOFFNListening to voicemail messagesWhen new messages have been recorded,“Voicemail msg. via phone co.” isdisplayed if message indication service isavailable.1MMENUN#330RThe speakerphone turns on.2Follow the pre-recorded instructions.3When finished, hang up.Note:RYou can also use the MACCESSN soft key,if displayed, to play new voicemailmessages.60 For assistance, please visit http://shop.panasonic.com/supportUseful InformationTGL46x(en)_0925_ver002.pdf 60 2015/09/25 20:59:20
RIf the handset still indicates there are newmessages even after you have listened toall new messages, turn it off by pressingand holding # until the handset beeps.Wall mountingNote:RMake sure that the wall and the fixingmethod are strong enough to support theweight of the unit.Base unit1Lead the AC adaptor cord and telephoneline cord through the hole in the wallmounting adaptor in the direction of thearrow.ABAB2Tuck the telephone line cord inside thewall mounting adaptor (A). Connect theAC adaptor cord and telephone line cord(B).1 AC adaptor cord32113Insert the hooks on the wall mountingadaptor into holes (1) and (2) on thebase unit.ABABFor assistance, please visit http://shop.panasonic.com/support 61Useful InformationTGL46x(en)_0925_ver002.pdf 61 2015/09/25 20:59:20
4Adjust the adaptor to hold the base unit,then push it in the direction of the arrowuntil it clicks into place.341 2345Mount the unit on a wall then slide downto secure in place.1 AC adaptor cordRThis product is compliant with thefollowing wall phone plate sizes (2types).2 83 mm (3 1/4 inches)3 102 mm (4 inches)Fit the slots of the unit onto thecorresponding wall phone plate tabsfor (4) and (5) respectively.To remove the wall mounting adaptorWhile pushing down the release levers (A),remove the adaptor (B).ChargerDrive the screws (1) (not supplied) into thewall.2 27.2 mm (1 1/16 inches)1262 For assistance, please visit http://shop.panasonic.com/supportUseful InformationTGL46x(en)_0925_ver002.pdf 62 2015/09/25 20:59:20
Error messagesDisplay message Cause/solutionAsk phonecompany forVM access #RYou have not stored the voicemail access number.Store the number (page 60).Base no powerorNo link. Re-connect baseAC adaptor.RConfirm the base unit’s AC adaptor is connected tothe unit and the power outlet correctly.RThe handset has lost communication with the baseunit. Move closer to the base unit and try again.RUnplug the base unit’s AC adaptor to reset the unit.Reconnect the adaptor and try again.RThe handset’s registration may have been canceled.Re-register the handset (page 44).Busy RNo cellular phone is paired to the base unit. Pair acellular phone (page 16).RThe called unit is in use.ROther units are in use and the system is busy. Tryagain later.RThe handset you are using is too far from the baseunit. Move closer and try again.ROnly 2 Bluetooth devices can be used with the unit atthe same time (for example, 2 cellular lines, or theheadset and 1 cellular line).Check tel line RThe supplied telephone line cord has not beenconnected yet or not connected properly. Check theconnections (page 10).RIf you do not connect the telephone line cord and useonly cellular lines, set the cellular line only mode(page 18).Error!! RRecording was too short. Try again.RSomeone is using a cellular line or headset. Tryagain later.RThe phonebook copy is incomplete (page 48). Thecellular phone is disconnected from the base unit.Make sure that other Bluetooth devices are notconnected to the cellular phone, and try again.Failed RAlthough the unit tried to connect to the cellularphone or headset, the connection has been failed.– Someone is using a cellular line or headset. Tryagain later.– Make sure that the cellular phone or headset isnot connected to other Bluetooth devices.Invalid RThere is no handset registered to the base unitmatching the handset number you entered.RThe handset is not registered to the base unit.Register the handset (page 44).For assistance, please visit http://shop.panasonic.com/support 63Useful InformationTGL46x(en)_0925_ver002.pdf 63 2015/09/25 20:59:20
Display message Cause/solutionRequiressubscriptionto Caller ID.RYou must subscribe to a Caller ID service. Once youreceive caller information after subscribing to a CallerID service, this message will not be displayed.Userechargeablebattery.RA wrong type of battery such as alkaline ormanganese was inserted. Use only the rechargeableNi-MH batteries noted on page 4, 7.TroubleshootingIf you still have difficulties after following the instructions in this section, disconnect the base unit’sAC adaptor, then reconnect the base unit’s AC adaptor. Remove the batteries from the handset,and then insert them into the handset again.General useProblem Cause/solutionThe handset does not turn oneven after installing chargedbatteries.RPlace the handset on the base unit or charger to turn onthe handset.The unit does not work. RMake sure the batteries are installed correctly (page 10).RFully charge the batteries (page 11).RCheck the connections (page 10).RUnplug the base unit’s AC adaptor to reset the unit.Reconnect the adaptor and try again.RThe handset has not been registered to the base unit.Register the handset (page 44).I cannot pair a cellular phone tothe base unit.RDepending on the compatibility of the cellular phone, youmay not be able to pair it to the base unit. Confirm thatyour cellular phone supports the hands-free profile (HFP)specification.RConfirm that the Bluetooth feature of your cellular phoneis turned on. You may need to turn this feature ondepending on your cellular phone.RThe Bluetooth technology on your cellular phone may notbe functioning normally. Turn off and on your cellularphone.RIf your cellular phone is already connected to anotherBluetooth device such as a Bluetooth headset, turn it offor disconnect it from your cellular phone.RSome cellular phones may require you to enter theBluetooth PIN to pairing. Confirm that you entered thecorrect PIN.64 For assistance, please visit http://shop.panasonic.com/supportUseful InformationTGL46x(en)_0925_ver002.pdf 64 2015/09/25 20:59:20
Problem Cause/solutionI cannot connect a cellularphone to the base unit.RConfirm that your cellular phone is turned on.RConfirm that your cellular phone is within base unit range(page 13).RYour cellular phone’s Bluetooth feature is turned off. Turnit on.RDepending on the state of the wireless environment, suchas the presence of any electrical interference, there maybe a delay even if the auto connection feature is turnedon. You can connect to the base unit manually (page 18).RThe cellular phone has not been paired to the base unit.Pair the cellular phone (page 16).RIf your cellular phone is already connected to anotherBluetooth device such as a Bluetooth headset or otherPanasonic DECT phone, disconnect the device, thenperform the connecting procedure to the base unit.RIf your cellular phone is already registered on anotherPanasonic DECT phone, this function will not workproperly. We strongly recommend that you remove theregistration of this phone on both your cellular phone andon the other Panasonic DECT phone.I cannot hear a dial tone. RMake sure that the CELL indicator lights up (page 14).RThe base unit’s AC adaptor or telephone line cord is notconnected. Check the connections.RDisconnect the base unit from the telephone line andconnect the line to a known working telephone. If theworking telephone operates properly, contact our servicepersonnel to have the unit repaired. If the workingtelephone does not operate properly, contact your phoneservice provider.The base unit beeps. RNew messages have been recorded. Listen to the newmessages (page 54).Menu listProblem Cause/solutionThe display is in a language Icannot read.RChange the display language (page 14).I cannot register a handset to abase unit.RThe maximum number of handsets (6) is alreadyregistered to the base unit. Cancel unused handsetregistrations from the base unit (page 44).Battery rechargeProblem Cause/solutionThe handset beeps and/or flashes.RBattery charge is low. Fully charge the batteries (page 11).For assistance, please visit http://shop.panasonic.com/support 65Useful InformationTGL46x(en)_0925_ver002.pdf 65 2015/09/25 20:59:20
Problem Cause/solutionI fully charged the batteries, but– still flashes,– is displayed, or– the operating time seems tobe shorter.RClean the battery ends ( , ) and the charge contactswith a dry cloth and charge again.RIt is time to replace the batteries (page 10).Making/answering calls, intercomProblem Cause/solution is displayed. RThe handset is too far from the base unit. Move closer.RThe base unit’s AC adaptor is not properly connected.Reconnect AC adaptor to the base unit.RThe handset is not registered to the base unit. Register it(page 44).Noise is heard, sound cuts inand out.RYou are using the handset or base unit in an area withhigh electrical interference. Re-position the base unit anduse the handset away from sources of interference.RMove closer to the base unit.RIf you use a DSL/ADSL service, we recommendconnecting a DSL/ADSL filter between the base unit andthe telephone line jack. Contact your DSL/ADSL providerfor details.The handset or base unit doesnot ring.RThe ringer volume for landline is turned off. Adjust theringer volume (page 21, 37).RThe ringer volume for cellular line is turned off. Adjust theringer volume (page 21, 35).RThe unit which is not selected to ring for cellular callsdoes not ring. To change the selection, see page 17.RSilent mode is turned on. Turn it off (page 41).I cannot make local calls withthe handset or base unit usinga cellular line.RYou need to add your area code when making cellularcalls. Store your area code in order to automatically add itto the beginning of the 7-digit phone number whenmaking cellular calls (page 19).I cannot make or answercellular calls with the handsetor base unit.RDepending on the cellular phone’s compatibility (page 5),you may not be able to make or answer cellular calls evenif the cellular phone is connected to the base unit.RMake sure that the CELL indicator lights up and thecellular phone is connected to the base unit (page 18).ROnly 2 Bluetooth devices can be used with the unit at thesame time (for example, 2 cellular lines, or the headsetand 1 cellular line).RThe cellular phone is being used separately from yoursystem.66 For assistance, please visit http://shop.panasonic.com/supportUseful InformationTGL46x(en)_0925_ver002.pdf 66 2015/09/25 20:59:20
Problem Cause/solutionI can make and answer cellularcalls but cannot hear a sound.RThe Bluetooth technology on your cellular phone may notbe functioning normally. Turn off and on your cellularphone.RDisconnect and reconnect the base unit AC adaptor andtry again.I cannot switch cellular callsfrom the unit to the cellularphone.RYour cellular phone may not support this feature. Refer tothe operating instructions of your cellular phone.I cannot make a call using alandline.RThe dialing mode may be set incorrectly. Change thesetting (page 15).I cannot use a cellular line or alandline.RThe unit can be used to talk on 2 lines at the same time(for example, 2 cellular lines, or the landline and 1 cellularline).I cannot make long distancecalls.RMake sure that you have long distance service.Caller ID/Talking Caller IDProblem Cause/solutionCaller information is notdisplayed.RYou must subscribe to Caller ID service. Contact yourphone service provider for details.RIf your unit is connected to any additional telephoneequipment such as a Caller ID box or cordless telephoneline jack, plug the unit directly into the wall jack.RIf you use a DSL/ADSL service, we recommendconnecting a DSL/ADSL filter between the base unit andthe telephone line jack. Contact your DSL/ADSL providerfor details.RThe name display service for landline calls may not beavailable in some areas. Contact your phone serviceprovider for details.ROther telephone equipment may be interfering with thisunit. Disconnect the other equipment and try again.Caller information is displayedor announced late.RDepending on your phone service provider, the unit maydisplay or announce the caller’s information at the 2ndring or later.RMove closer to the base unit.For assistance, please visit http://shop.panasonic.com/support 67Useful InformationTGL46x(en)_0925_ver002.pdf 67 2015/09/25 20:59:20
Problem Cause/solutionCaller information is notannounced.RThe ringer volume for landline is turned off. Adjust theringer volume (page 37, 37).RThe ringer volume for cellular line is turned off. Adjust theringer volume (page 35, 35).RThe unit which is not selected to ring for cellular callsdoes not announce caller information. To change theselection, see page 17.RThe Talking Caller ID feature is turned off. Turn it on(page 37, xx).RThe ring as cell mode is set to “On (without TalkingCID)”. To change the mode, see page 17.RThe number of rings for the answering system is set to “2rings” or “Toll saver”. Select a different setting(page 58).RYour unit does not announce caller information while theother devices such as headset or handsets are engagedin a call.The caller list/incoming phonenumbers are not editedautomatically.RThe Caller ID number auto edit feature is turned off. Turnit on and try again (page 39).RYou need to call back the edited number to activate CallerID number auto edit.I cannot dial the phone numberedited in the caller list.RThe phone number you dialed might have been editedincorrectly (for example, the long distance “1” or the areacode is missing). Edit the phone number with anotherpattern (page 46).Time on the unit has shifted. RIncorrect time information from incoming Caller IDchanges the time. Set the time adjustment to “Manual”(off) (page 37).The 2nd caller’s information isnot displayed during an outsidecall.RIn order to use Caller ID, call waiting, or Call WaitingCaller ID (CWID), you must first contact your phoneservice provider and subscribe to the desired service.After subscribing, you may need to contact your phoneservice provider again to activate this specific service,even if you already subscribed to both Caller ID and CallWaiting with Caller ID services (CWID).68 For assistance, please visit http://shop.panasonic.com/supportUseful InformationTGL46x(en)_0925_ver002.pdf 68 2015/09/25 20:59:20
Using Bluetooth devicesProblem Cause/solutionI cannot copy phonebookentries from a cellular phone.RConfirm that the cellular phone supports Bluetoothwireless technology.RConfirm that the cellular phone supports the Phone BookAccess Profile (PBAP) or Object Push Profile (OPP)specification.RIf the cellular phone is already connected to anotherBluetooth device such as a Bluetooth headset, turn it offor disconnect it from the cellular phone.RSomeone is using a cellular line or headset. Try againlater.RTurn the cellular phone off, then turn it on and try again.RIf an entry is already stored in the unit’s phonebook, theentry cannot be copied even by selecting another group.RiPhone does not support individual phonebook copy.I cannot have a conversationusing the headset.orI cannot connect my headset tothe base unit.RConfirm that the Bluetooth wireless headset supports theHeadSet Profile (HSP) specification.RYour Bluetooth headset is not paired. Pair it (page 51).RTurn your headset off, then turn it on and try again.RIf your headset is already connected to another Bluetoothdevice such as your cellular phone, disconnect theheadset from your cellular phone, then perform theconnecting procedure from the base unit.ROnly 2 Bluetooth devices can be used with the unit at thesame time (for example, 2 cellular lines, or the headsetand 1 cellular line).Noise is heard during a call onthe headset.RA Bluetooth headset can communicate with the base unitwithin a range of approximately 10 m (33 feet). Theconnection may be subject to interference fromobstructions such as walls or electronic devices. Movecloser to the base unit.Some headset enhancedfeatures are not available.RThe base unit does not support enhanced features suchas Last number redial or Call reject.An error tone is heard when Itry to program the Bluetoothfeature.RThe Bluetooth feature cannot be accessed immediatelyafter connecting the AC adaptor to the base unit. Wait afew seconds and try again.RThe headset has not connected to the base unit yet, eventhough you performed the connecting procedure setting.Wait a few seconds and try again.For assistance, please visit http://shop.panasonic.com/support 69Useful InformationTGL46x(en)_0925_ver002.pdf 69 2015/09/25 20:59:20
Problem Cause/solutionApp alert is not displayed orannounced.orText message alert is notdisplayed or announced.RConfirm that the cellular phone supports the MessageAccess Profile (MAP) specification to use text messagealert feature.RConfirm that the cellular phone supports the Serial PortProfile (SPP) specification to use App alert feature.RConfirm that the [Application Alerts manager] setting ofyour Android phone is turned on.R“Alert On/Off” is set to “Off”. Set it to “On”(page 50).R“Voice alert” is set to “Off”. Set it to “On” (page 50).RThe Bluetooth device’s Bluetooth notifications setting isturned off.RThe handset selected to display and/or announce alerts isin use.RThe Bluetooth device or its corresponding cellular line isin use.RYour cellular phone’s Bluetooth feature is turned off. Turnit on.Answering systemProblem Cause/solutionThe unit does not record newmessages.RThe answering system is turned off. Turn it on (page 53).RThe answering system does not answer or record callsfrom cellular lines.RThe message memory is full. Erase unnecessarymessages (page 54, 55).RThe recording time is set to “Greeting only”. Changethe setting (page 59).RYour phone service provider’s voicemail service may beanswering your calls before the unit’s answering systemcan answer your calls. Change the unit’s number of ringssetting (page 58) to a lower value, or contact your phoneservice provider.RThe answering system will not answer incoming callswhile the other devices such as headset or handsets areengaged in a call.I cannot operate the answeringsystem remotely.RThe remote access code is not set. Set the remoteaccess code (page 57).RYou are entering the wrong remote access code. If youhave forgotten your remote access code, enter theremote access code setting to check your current code(page 57).RThe answering system is turned off. Turn it on (page 58).RYou cannot operate the answering system when calling acellular phone paired to the base unit.70 For assistance, please visit http://shop.panasonic.com/supportUseful InformationTGL46x(en)_0925_ver002.pdf 70 2015/09/25 20:59:20
Problem Cause/solutionThe unit does not emit thespecified number of rings.RIf the ring once setting is turned off (page 27), the numberof rings decreases by 1 from the specified number ofrings.Bluetooth PINProblem Cause/solutionI cannot remember the PIN. RChange the PIN using the following method.Handset:1MMENUN#6192*70003Enter the new 4-digit PIN. a MOKN4Enter the new 4-digit PIN again. a MSAVEN a MOFFNVoicemailProblem Cause/solution“Voicemail msg. viaphone co.” is shown on thehandset display.How do I remove this messagefrom the display?RThis notification is displayed when your phone serviceprovider’s voicemail service (not the unit’s answeringsystem) has recorded a message for you. Typically youcan remove this notification from the display by listeningto the message. To listen to the message, dial thevoicemail number provided by your phone serviceprovider (for most cases, this will be your own phonenumber), and follow the voice instructions. Depending onyour phone service provider, you may need to remove allmessages from your voice mailbox to remove thenotification. You can also remove this notification bypressing and holding # until the unit beeps.Liquid damageProblem Cause/solutionLiquid or other form of moisturehas entered the handset/baseunit.RDisconnect the AC adaptor and telephone line cord fromthe base unit. Remove the batteries from the handset andleave to dry for at least 3 days. After the handset/baseunit are completely dry, reconnect the AC adaptor andtelephone line cord. Insert the batteries and charge fullybefore use. If the unit does not work properly, contact anauthorized service center.Caution:RTo avoid permanent damage, do not use a microwave oven to speed up the drying process.For assistance, please visit http://shop.panasonic.com/support 71Useful InformationTGL46x(en)_0925_ver002.pdf 71 2015/09/25 20:59:20
FCC and other informationThis equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US:ACJ----------.If requested, this number must be provided to the telephone company.L Registration No.............(found on the bottom of the unit)L Ringer Equivalence No. (REN).......0.1BA plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with the product. It is designed to be connected to a compatible modular jack that is also compliant.The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company. For products approved after July 23, 2001, the REN for the product is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3).If this equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But if advance notice isn't practical, the telephone company will notify the customer as soon as possible. Also, you will beadvised of your right to file a complaint with the FCC if you believe it is necessary.The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the operation of the equipment. If this happens the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted service.If trouble is experienced with this equipment, for repair or warranty information, please contact a Factory Service Center or other Authorized Servicer. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved.Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission or corporation commission for information.If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer.This equipment is hearing aid compatible as defined by the FCC in 47 CFR Section 68.316.When you hold the phone to your ear, noise might be heard in your Hearing Aid. Some Hearing Aids are not adequately shielded from external RF (radio frequency) energy. If noise occurs, use an optional headset accessory or the speakerphone option (if applicable) when using this phone. Consult with your audiologist or Hearing Aid72 For assistance, please visit http://shop.panasonic.com/supportUseful InformationTGL46x(en)_0925_ver002.pdf 72 2015/09/25 20:59:20
manufacturer about the availability of Hearing Aids which provide adequate shielding to RF energy commonly emitted by digital devices.WHEN PROGRAMMING EMERGENCYNUMBERS AND(OR) MAKING TESTCALLS TO EMERGENCY NUMBERS:1) Remain on the line and briefly explain to the dispatcher the reason for the call.2) Perform such activities in the off-peakhours, such as early morning or late evenings.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Privacy of communications may not be ensured when using this phone.CAUTION:Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this device.NOTE:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Thisequipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined byturning the equipment off and on, the user isencouraged to try to correct the interference by one or more of the following measures:– Reorient or relocate the receiving antenna.– Increase the separation between the equipment and receiver.– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.– Consult the dealer or an experienced radio/TV technician for help.Some cordless telephones operate at frequencies that may cause interference to nearby TVs and VCRs. To minimize or prevent such interference, the base of the cordless telephone should not be placed near or on top of a TV or VCR. Ifinterference is experienced, move the cordless telephone further away from the TVor VCR. This will often reduce or eliminate interference.FCC RF Exposure Warning:LThis product complies with FCC radiation exposure limits set forth for an uncontrolled environment. LTo comply with FCC RF exposure requirements, the base unit must be installed and operated 20 cm (8 inches) or more between the product and all person’s body. LThis product may not be collocated or operated in conjunction with any other antenna or transmitter.L For body-worn operation, the handset must be used only with a non-metallic accessory. Use of other accessories may not ensure compliance with FCC RF exposure requirements.Notice:L FCC ID can be found inside the battery compartment or on the bottom of the units.For assistance, please visit http://shop.panasonic.com/support 73Useful InformationTGL46x(en)_0925_ver002.pdf 73 2015/09/25 20:59:21
Compliance with TIA-1083 standard: Tel ephone handsets identified with this logo have reduced noise and interference when used with T-Coil equipped hearing aids and cochlear implants.TCompatible withHearing Aid T-CoilTIA-108374 For assistance, please visit http://shop.panasonic.com/supportUseful InformationTGL46x(en)_0925_ver002.pdf 74 2015/09/25 20:59:21
Guía Rápida EspañolaPara obtener ayuda, visite http://shop.panasonic.com/support (solo en inglés) 75Guía Rápida Española TGL46x(en)_0925_ver002.pdf 75 2015/09/25 20:59:21
76 Para obtener ayuda, visite http://shop.panasonic.com/support (solo en inglés) Guía Rápida EspañolaTGL46x(en)_0925_ver002.pdf 76 2015/09/25 20:59:21
Para obtener ayuda, visite http://shop.panasonic.com/support (solo en inglés) 77Guía Rápida Española TGL46x(en)_0925_ver002.pdf 77 2015/09/25 20:59:21
78 Para obtener ayuda, visite http://shop.panasonic.com/support (solo en inglés) Guía Rápida EspañolaTGL46x(en)_0925_ver002.pdf 78 2015/09/25 20:59:21
Para obtener ayuda, visite http://shop.panasonic.com/support (solo en inglés) 79Guía Rápida Española TGL46x(en)_0925_ver002.pdf 79 2015/09/25 20:59:21
80 Para obtener ayuda, visite http://shop.panasonic.com/support (solo en inglés) Guía Rápida EspañolaTGL46x(en)_0925_ver002.pdf 80 2015/09/25 20:59:21
Para obtener ayuda, visite http://shop.panasonic.com/support (solo en inglés) 81Guía Rápida Española TGL46x(en)_0925_ver002.pdf 81 2015/09/25 20:59:21
82 Para obtener ayuda, visite http://shop.panasonic.com/support (solo en inglés) Guía Rápida EspañolaTGL46x(en)_0925_ver002.pdf 82 2015/09/25 20:59:21
Para obtener ayuda, visite http://shop.panasonic.com/support (solo en inglés) 83Guía Rápida Española TGL46x(en)_0925_ver002.pdf 83 2015/09/25 20:59:21
84 Para obtener ayuda, visite http://shop.panasonic.com/support (solo en inglés) Guía Rápida EspañolaTGL46x(en)_0925_ver002.pdf 84 2015/09/25 20:59:21
Customer servicesAccessories!hp://shop.panasonic.com/supportCustomer Services DirectoryShopfor all your Panasonic gearGo to Get everything you need to get the most out ofyour Panasonic products Accessories & Parts for your Camera, Phone, A/V products, TV, Computers & Networking, Personal Care, Home Appliances, Headphones, Baeries, Backup Chargers & more…For Product Informa!on, Opera!ng Assistance, Parts, Owner’s Manuals, Dealer and Service infogo to hp://shop.panasonic.com/supportFor the hearing or speech impaired TTY: 1- 877-833-8855 As of June 2015 For assistance, please visit http://shop.panasonic.com/support 85AppendixTGL46x(en)_0925_ver002.pdf 85 2015/09/25 20:59:21
Limited Warranty (ONLY FOR U.S.A.)Limited Warranty Coverage (For USA Only)LaborOne (1) YearPartsOne (1) YearTo submit a new repair request and for quick repair status visit our Web Site athttp://shop.panasonic.com/supportPanasonic Products Limited WarrantyOnline Repair RequestMail-In Service--Online Repair RequestIf your product does not work properly because of a defect in materials or workmanship, Panasonic Corporation of North America (referred to as “the warrantor”) will, for the length of the period indicated on the chart below, which starts with the date of original purchase (“warranty period”), at its option either (a) repair your product with new or refurbished parts,(b) replace it with a new or a refurbished equivalent value product, or (c) refund your purchase price. The decision to repair, replace or refund will be made by the warrantor.During the “Labor” warranty period there will be no charge for labor. During the “Parts” warranty period, there will be no charge for parts. This Limited Warranty excludes both parts and labor for non-rechargeable batteries, antennas, and cosmetic parts (cabinet). This warranty only applies to products purchased and serviced in the United States.This warranty is extended only to the original purchaser of a new product which was not sold “as is”.TelephoneWhen shipping the unit, carefully pack, include all supplied accessories listed in the Owner’s Manual, and send it prepaid, adequately insured and packed well in a carton box. When shipping Lithium Ion batteries please visit our Web Site at http://shop.panasonic.com/support as Panasonic is committed to providing the most up to date information. Include a letter detailing the complaint, a return address and provide a daytime phone number where you can be reached. A valid registered receipt is required under the Limited Warranty.IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD, THE PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT/PROOF OF PURCHASE INDICATING DATE OF PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE. CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE.Product or Part Name86 For assistance, please visit http://shop.panasonic.com/supportAppendixTGL46x(en)_0925_ver002.pdf 86 2015/09/25 20:59:21
Limited Warranty Limits and Exclusions(As examples, this excludes damages for lost time, travel to and from the servicer, loss of or damage to media or images, data or other memory or recorded content. The items listed are not exclusive, but for illustration only.)This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by the warrantor, or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, introduction of sand, humidity or liquids, commercial use such as hotel, office, restaurant, or other business or rental use of the product, or service by anyone other than a Factory Service Center or other Authorized Servicer, or damage that is attributable to acts of God.THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIMITED WARRANTY COVERAGE”.THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY.ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY.PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE YOUR RESPONSIBILITY.Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the exclusions may not apply to you.This warranty gives you specific legal rights and you may also have other rights which vary from state to state. If a problem with this product develops during or after the warranty period, you may contact your dealer or Service Center. If the problem is not handled to your satisfaction, then write to: Consumer Affairs Department Panasonic Corporation of North America 661 Independence Pkwy Chesapeake, VA 23320As of June 2015For assistance, please visit http://shop.panasonic.com/support 87AppendixTGL46x(en)_0925_ver002.pdf 87 2015/09/25 20:59:21
Index#3-way conference: 23AAdditional handset: 44Alarm: 40Answering calls: 21Answering systemCall screening: 58Erasing messages: 54, 55, 58Greeting message: 53Greeting only: 59Listening to messages: 54, 57New message alerting: 55Number of rings: 58Recording time: 59Remote access code: 57Remote operation: 57Ring count: 58Toll saver: 58Turning on/off: 53Auto intercom: 25Auto talk: 21, 39BBaby monitor: 42Battery: 10, 11Bluetooth wireless technologyCellular phone (Link to cell): 16Headset: 51Phonebook transfer: 48Booster (Clarity booster): 22CCall block: 26One ring for blocked call: 27Call share: 23, 39Call waiting: 22Call Waiting Caller ID: 22Caller ID number auto edit: 39, 46Caller ID service: 45Caller list: 45Caller list edit: 46Cellular calls: 20Cellular phonePairing: 16Unpairing: 16Chain dial: 31CID (Caller ID): 45, 46Conference calls: 23Control type: 12Customer support: 39DDate and time: 14Dialing mode: 15Direct command code: 33DisplayContrast: 38Language: 14EEco mode: 11Equalizer: 23Error messages: 63FFlash: 22, 39GGroups: 30HHandsetDeregistration: 44Name: 43Registration: 44Hold: 22IIntercom: 24KKey detector: 38, 40Key tone: 38LLandline calls: 20Line mode: 39Link to cellAlert settings for your DECTphone: 50Area code: 19Auto connection: 17Cellular line only mode: 18Cellular line selection: 19Connection: 18Link to Cell app: 49Ring as cell mode: 17Select unit to ring: 17Text message (SMS: Short MessageService) alert: 50MMaking calls: 20Missed calls: 45Mute: 22NNoise reduction: 23PPause: 20Phonebook: 29PIN: 19Power failure: 11RRedialing: 21Ringer ID: 30Ringer tone: 35, 37Rotary/pulse service: 22SSilent mode: 41Speed dial: 31SP-PHONE (Speakerphone): 20TTalking Caller ID: 45Temporary tone dialing: 22Time adjustment: 37Transferring calls: 2388IndexTGL46x(en)_0925_ver002.pdf 88 2015/09/25 20:59:21
Troubleshooting: 64TTY: 85VVM (Voicemail): 60Voice announcement language: 14Voice paging: 25Voicemail: 58, 60VolumeReceiver: 20Ringer (Base unit): 21, 35, 37Ringer (Handset): 21, 35, 37Ringer for intercom call (Handset): 37Ringer for outside call(Handset): 21, 35, 37Speaker: 20WWall mounting: 6189IndexTGL46x(en)_0925_ver002.pdf 89 2015/09/25 20:59:21
90NotesTGL46x(en)_0925_ver002.pdf 90 2015/09/25 20:59:21
91NotesTGL46x(en)_0925_ver002.pdf 91 2015/09/25 20:59:21
1 Reconnect AC adaptor to the base unit.2 Check if telephone line cord is connected.3 Use rechargeable Ni-MH batteries. (Alkaline/Manganese/Ni-Cd batteries CANNOT be used.)4 Read troubleshooting page in the Operating Instructions.Visit our Web site: http://shop.panasonic.com/supportLFAQ and troubleshooting hints are available.If your product is not working properly. . .IMPORTANT!For your future referenceWe recommend keeping a record of the following information to assist with any repair underwarranty.Serial No. Date of purchase(found on the bottom of the base unit) Name and address of dealer Attach your purchase receipt here.Two Riverfront Plaza, Newark, NJ 07102-5490© Panasonic System Networks Co., Ltd. 2015Printed in Vietnam *PNQX7782ZA**PNQX7782ZA* PNQX7782ZA TT1115WK0TGL46x(en)_0925_ver002.pdf 92 2015/09/25 20:59:21

Navigation menu