Panasonic of North America 96NVL-DM100A DECT Monitor Station for Wireless Door Camera System, Model VL-SDM100A User Manual Operating Instructions English

Panasonic Corporation of North America DECT Monitor Station for Wireless Door Camera System, Model VL-SDM100A Operating Instructions English

user manual

VL-CM850A VL-DM100AOperating InstructionsModel No. VL-SDM100AIncluding: VL-DM100AVL-CM850AWireless Door CameraThank you for purchasing a Panasonic product.Please read this manual before using the unit and save for future reference.
IntroductionProduct descriptions ...........................................3Accessory information ........................................3Important InformationFor your safety ....................................................5Important safety instructions ...............................6For best performance .........................................7Other information ................................................8Getting StartedLocation of controls .............................................9Monitor display ..................................................11Attaching the Wireless Camera ........................13How to useMonitoring the outside ......................................19Programming function settings .........................21Useful InformationReplacing batteries ...........................................22Cleaning ............................................................22HelpTroubleshooting ................................................23Error messages ................................................25General InformationSpecifications ....................................................26For users in the United States Only (FCC and otherinformation) .......................................................28For users in Canada Only (Industry CanadaNotices and other information) ..........................29Quick Reference Guide (in Spanish)Quick Reference Guide (in Spanish) ................30AppendixCustomer services (For United States) .............33Warranty (For United States) ............................34Warranty (For Canada) .....................................36IndexIndex..................................................................382Table of Contents
Product descriptionsProduct figureVL-CM850A*1 VL-DM100A*2Description in thismanual Wireless Camera Monitor Cradle*1 The Wireless Camera is used by attaching it to the front door of a house or apartment (page 13).*2 With the Monitor you can easily check your front door with images from the Wireless Camera.*3 The Cradle is used to hold the Monitor, see page 11.Accessory informationSupplied accessoriesADouble-sided tape*1 … ´ 1 BHex key*1 … ´ 1 CScrews*1 … ´ 2DCradle*2 … ´ 1 EOperating Instructions*3 … ´1*1 Used for the Wireless Camera and for installation.*2 Used for the Monitor.*3 Containing English Operating Instructions, French Operating Instructions, and Spanish QuickReference Guide.Note:RDesign and specifications are subject to change without notice.RThe illustrations in these instructions may vary slightly from the actual product.License:RPortions of this software are based in part on the work of the Independent JPEG Group.Trademarks:RAll other trademarks identified herein are property of their respective owners.3Introduction
This product is not designed to be used to prevent theft or intrusions. Panasonic assumes noliability for any accidents or damages occurring in such cases.4Introduction
For your safetyTo prevent severe injury and loss of life/property, read this section carefully before using the product toensure proper and safe operation of your product.WARNINGPower connectionRUse only the power source marked on the unit. If you are not sure of the type of power supplied to yourhome, consult your dealer or local power company.RDo not overload power outlets and extension cords. This can result in the risk of fire or electric shock.RCompletely insert the power plug into the power outlet. Failure to do so may cause electric shock and/or excessive heat resulting in a fire.RRegularly remove any dust, etc. from the power plug by pulling it from the power outlet, then wipingwith a dry cloth. Accumulated dust may cause an insulation defect from moisture, etc. resulting in a fire.RIf the unit emits smoke or an abnormal smell, or makes an unusual noise, immediately unplug thepower plug from the power outlet. These conditions can cause fire or electric shock. Confirm thatsmoke has stopped and contact an authorized service center.RNever touch the plug with wet hands. Danger of electric shock exists.InstallationRDo not use the unit in areas that are exposed to rain, moisture, steam, or oily smoke, or areas thathave excessive dust. This may cause fire or electric shock.RDo not install or use this product near automatically controlled devices such as automatic doors andfire alarms. Radio waves emitted from this product may cause such devices to malfunction resulting inan accident.RDo not perform any actions (such as damaging, altering, exposing to heat sources, or placing heavyobjects on the electrical parts and the power plug) that may damage the electrical parts and the powerplug. Using the unit with damaged electrical parts or a damaged power plug may cause electric shock,short circuits, or fire. Contact an authorized service center for repairs.Operating safeguardsRTo reduce the risk of electric shock, do not disassemble this unit. Refer servicing to an authorizedservice center when service is required. Opening covers may expose you to dangerous voltages orother risks. Incorrect reassembly can cause electric shock when the unit is subsequently used.RDo not touch the Monitor, electrical parts, or the power plug during an electrical storm. There may be aremote risk of electric shock from lightning.RNever spill any liquids on the unit or get the unit wet in any way. This may cause fire, electric shock, orinjury. If the unit becomes wet, immediately unplug the power plug from the power outlet and referservicing to an authorized service center.RNever spill any liquids on the electrical parts or power plug, or get the electrical parts or power plug wetin any way. This may cause fire, electric shock, or injury. If the electrical parts or power plug becomeswet, immediately unplug the power plug from the power outlet and refer servicing to an authorizedservice center.RUnplug this unit from power outlets and refer servicing to an authorized service center if the powercord becomes damaged or frayed.– If the Monitor has been exposed to rain or water, or liquid has been spilled into the unit. Do not usea microwave oven to speed up the drying process of any parts of the unit to avoid permanentdamage.– If the unit has been dropped or physically damaged.RDo not place the unit in a microwave oven or other devices such as electromagnetic cookers. This maycause heat or smoke to be generated, fire, or an explosion.5Important Information
MedicalRConsult the manufacturer of any personal medical devices, such as pacemakers or hearing aids, todetermine if they are adequately shielded from external RF (radio frequency) energy. (The unitoperates in the frequency range of 1.92 GHz to 1.93 GHz, and the RF transmission power is 115 mW(max.).)RDo not use the unit in health care facilities if any regulations posted in the area instruct you not to doso. Hospitals or health care facilities may be using equipment that could be sensitive to external RF(radio frequency) energy.Installation and relocationRThe power plug is used as the main disconnect device. Ensure that the power outlet is installed nearthe product and is easily accessible.RMake sure to have sure footing when attaching or taking off the unit. Tripping over or falling down maycause injury.Dry-cell batteryRDo not come into contact with the electrolyte from the batteries or let it get in your eyes if liquid isleaking from the batteries. This may cause loss of sight. Should the electrolyte from the batteries getinto your eyes, do not rub your eyes. Immediately flush your eyes with clean water and see a doctor formedical treatment as soon as possible.RIn order to prevent the risk of heat generation, fire, an explosion, or leaking liquids, do not do thefollowing.– Charge, heat up, or disassemble batteries, or dispose of batteries in the fire.– Connect metal objects to batteries’ terminals.– Carry or store the batteries together with rings, bracelets, keys, or similar objects.– Use old and new batteries or batteries of different types together.RDo not place the batteries within reach of children. There is a risk that children may swallow batteries.If you suspect that a child has swallowed a batteries immediately seek consultation with a medicalpractitioner.RIn order to prevent the risk of heat generation, an explosion, or leaking liquids, immediately removebatteries that cannot be used, remove batteries when not using the unit for extended periods, and donot insert batteries with incorrect polarities.CAUTIONInstallation and relocationRIn order to prevent the risk of injury from the unit falling, do the following.– Always follow the attachment procedures listed in this manual.– Attach the Wireless Camera securely to the door.– Remove the battery case when exchanging batteries.– Do not use excessive force when closing the door.– Never use the unit in an unstable place or a place that is exposed to strong vibrations.Dry-cell batteryROnly use specified batteries. Using unspecified batteries may cause leaking fluids, heat generation, oran explosion.Important safety instructionsWhen using this unit, basic safety precautions should always be followed to reduce the risk of fire,electric shock, or personal injury.6Important Information
RDo not use this unit near water. For example, near a bathtub, wash bowl, kitchen sink, or laundry tub,in a wet basement, or near a swimming pool, and the like.RDo not dispose of the batteries in a fire. They may explode. Check with local waste managementcodes for special disposal instructions.SAVE THESE INSTRUCTIONSFor best performanceBefore usingRIt is prohibited to disassemble or modify this unit. Contact the dealer where you purchased this unit forrepair.RWhen power fails, this unit cannot be used.RPanasonic may not be able to take liability for damages due to external factors such as power failures.Location (Wireless Camera/Monitor)The Wireless Camera (A) and Monitor (B) use radio waves to communicate with each other.use within 70 m (229 ft 8 in.)(with no obstructions)ABRFor maximum distance operation, we recommend the following:Placing the Monitor away from electrical appliances such as:– TVs– Radios– Personal computers– Air conditionersRCoverage depends on the local environmental conditions.EnvironmentRKeep the unit away from electrical noise generating devices, such as fluorescent lamps and motors.RThe unit should be kept away from excessive smoke, dust, high temperature and vibration.RThe unit should not be exposed to direct sunlight.RDo not install the Wireless Camera in areas where there is a backlight (the visitors’ faces appear darkand are hard to recognize), or areas that create hydrogen sulfide (this may cause a malfunction).RDo not install the Wireless Camera in areas where it can be directly exposed to the elements (this maycause a malfunction).RDo not place heavy objects on top of the unit.RWhen you leave the unit unused for a long period of time, unplug it from the power outlet. In thissituation, we recommend that you turn the power for the Wireless Camera off in order to conserve thebatteries’ energy.RThe unit should be kept away from heat sources such as heaters, kitchen stoves, etc. It should not beplaced in rooms where the temperature is less than 5 °C (41 °F) or greater than 40 °C (104 °F). Dampbasements should also be avoided.REven when the Monitor and Wireless Camera are within 70 m (229 ft 8 in.), if there obstructions suchas the ones below, problems such as signals becoming weak, distorted images, and slow image7Important Information
refresh rates may occur, causing the Monitor and Wireless Camera to not be able to be used together.(See page 12 for information about the signal display.)– walls with an insulation material that contains aluminum foil– walls made of concrete or galvanized iron– when each device Wireless Camera and Monitor) is used on a different floor– double insulating glass or metallic shutters– places where several walls are separated by open spaceROperating the product near electrical appliances may cause interference. Move away from theelectrical appliances.Other informationCautionRRisk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to theinstructions.Privacy and rights of portraitWhen installing or using the Wireless Camera, please take into consideration the rights of others withregard to privacy.RIt is generally said that “Privacy” means the ability of an individual or group to stop information aboutthemselves from becoming known to people other than those whom they choose to give theinformation. “Rights of portrait” means the right to be safe from having your own image taken and usedindiscriminately without consent.OthersRPanasonic assumes no liability for injuries or property damage resulting from failures arising out ofimproper installation or operation inconsistent with the Operating Instructions.RIf you stop using the Wireless Camera, remove the Wireless Camera from the door to prevent themfrom falling off.Requesting repairs for the unitRDuring repairs the unit’s settings may be changed or returned to the default settings.Note for product disposal, transfer, or returnRPerform “RESET SETTINGS” with the Monitor before you dispose of, transfer, or return the product.Notice (for users in the United States Only)8Important Information
Location of controlsWireless CameraBHICFDEGJARBottom viewKFixing screwCamera unitCamera lensCable protection sheetRDo not remove this sheet.Magnet/rubberRThe magnet and rubber are used to stop the Wireless Camera from moving.Wireless unitBattery casePower slide switch (ON/OFF)RThe batteries run out of power faster in the following situations. Turn the power slide switch OFF inthese situations.– In situations such as when you are away from home for extended periods of time and youdisconnect the power to the Monitor.– During electrical power failures.Pair button (Not normally used.)ROnly used when pairing must be performed again for repairs or product exchanges (page 25).Pair indicatorRFlashes/lights when pairing (not normally performed).9Getting Started
RWhen you turn the Wireless Camera’s power ON, you can check the pair indicator to check if thepower is actually turned on (page 15).Slide leverRUse the slide lever when removing the battery case.MonitorMENUADBCRBottom viewThe Monitor can be hung from awall by passing straps through theholes.EFMenu buttonMonitor buttonRUsed to monitor the area outside the door (page 19).RUsed to perform operations displayed by the operation guidance.Navigator keyUsed to select items or perform operations displayed by the operation guidance.MDN/MCNPress MDN (up) or MCN (down).MFN/MENPress MFN (left) or MEN (right).Monitor displayElectrical parts Power plug10Getting Started
CradleUse the Cradle to hold the Monitor.– Pass the power cord through the groove in the Cradle.RWhen the Monitor is placed on theCradle.Monitor displayRThe following display is an example for description purposes, and it may differ from the actual display.RTo display the top menu when it is off (not displayed), press MMENUN.Top menu When displaying imagesOFFAll SETTINGSSIGNAL/BATOFF OK1223PRESS 3 SEC TO GO TO ZOOMPRESS 3 SEC TO GO TO ZOOMDisplays the menu names for items that can be operated.“SIGNAL/BAT”: Use this menu to display the status of the wireless signal and batteries (page 12).“ALL SETTINGS”: Use this menu to change settings (page 21).Operation guidanceDisplays what actions the buttons can be used for and guidance for operations.RThe operation guidance can be configured not to be displayed when monitoring (page 21).Displays the current status with symbols.Displayed when displaying the Zoom display (page 19).The displayed arrows indicate which direction the Zoom position can be moved whendisplaying the Zoom display.Displayed when the signal between the Monitor and Wireless Camera is weak.11Getting Started
Displayed when there is not much power remaining in the batteries of the WirelessCamera.Signal/battery informationYou can display and check the signal and remaining battery power of the Wireless Camera and Monitorwith the following operations.1Press MMENUN, then select “SIGNAL/BAT” by pressing MFN or MEN.2Press MN (Monitor button) (“OK”).3Press MEN (“RENEW”) to display the latest signal status and remaining battery power information.4To finish the operation, press MMENUN 2 times.Note:RThe MMENUN button will light in red to inform you when the signal is weak or if the remaining batterypower is running low. If the MMENUN is pressed at this time, the light goes out and the signal/batteryinformation screen is displayed.Signal status symbolsGood Bad Out of range*1*1*1 Use within this range.Note:RWhen the Wireless Camera or Monitor is out of range, move the Monitor to an area with a good signal.Remaining battery power symbolsLots Little Out of power*1*1*1 Use within this range.Note:RWhen the batteries of the Wireless Camera run out of power, exchange them with new batteries(page 15, 22).RWhen the Wireless Camera is (Out of range), the remaining battery power symbol of the WirelessCamera is not displayed.12Getting Started
Attaching the Wireless CameraBefore attaching the Wireless Camera (Installation preparation)Wireless Camera rangeRViews when the camera is set “WIDE” (default).When using with a door with a height of 2 m (6 ft 7 in.)Side view Top viewapprox. 90approx. 50 cm(1 ft 8 in.)approx. 120approx. 180 cm(5 ft 11 in.)approx. 50 cm (1 ft 8 in.)Attaching the Wireless Camera to a doorInner side of the doorInside OutsideWireless unit Camera unitSurface of the doorRAttach the wireless camera to a door in a protected area that is not directly exposed to the elements,such as under a roof or eave.RConnect the Monitor to the power outlet and turn it on.RAttach the Wireless Camera to a flat area on the surface on the door.RWipe dirt and moisture from the surface of the door where the Wireless Camera will be attached.RRemove the protection film from rear side of the wireless unit.13Getting Started
Doors the Wireless Camera can be attached toRSteel doors that open to the inside that meet the following requirements.– A gap of 2.5 mm (3/32 in.) or more for A and 3 mm (1/8 in.) or more for B between the door anddoor frame.– A door with a thickness of between 32 mm - 63 mm (1 1/4 in. - 2 1/2 in.) (C).45 mm (1 3/4 in.) or lessCamera unitSide of the doorDoor thickness between 32 mm - 63 mm (1 1/4 in. - 2 1/2 in.)CWireless unitA gap of 2.5 mm (3/32 in.) or moreAA gap of 3 mm (1/8 in.) or moreBOutsideInsideDoor frameView from the sideNote:RThe Wireless Camera cannot be attached to the following doors.– Sliding doors– Doors that open to the outside– A door with a protrusion such as a guard plate, or a cavitySide of the door14Getting Started
Inserting batteries into the wireless unitBefore attaching the Wireless Camera to the door, insert the batteries by performing the followingprocedure.1Slide the slide lever (A) across and take out the battery case (B) from the wireless unit.RBe careful not to drop the battery case when taking it out.AB2Insert the batteries.R4 Alkaline AA (LR6) batteriesRDo not mix old and new batteries or batteries of different types.RMake sure that the polarity ( , ) of the batteries is correct.3Insert the battery case into the wireless unit.RFirmly push the battery case into the wireless unit until the red label (A) cannot be seen.BCA4Slide the power slide switch (B) for the power to ON. RYou can check if the power is actually on by confirming that the register indicator (C) changesfrom flashing to not lit.Note:RBatteries have a shelf-life. Check the shelf-life listed on the batteries before using them.15Getting Started
RUse Alkaline AA (LR6) batteries. The batteries’ lifetime will be reduced if different types of batteries areused together.RTo prevent the Wireless Camera from falling down when replacing the batteries, make sure to closethe door and turn off the power of the Wireless Camera before replacing batteries.Attaching the Wireless Camera to a doorNote:RBe careful not to get your fingers caught in the door when attaching the Wireless Camera.1Loosen the wireless unit’s fixing screw (A) with the included hex key (B), and then hang theWireless Camera from the door.RDo not take the fixing screw (A) off, just loosen it.RPosition the Wireless Camera so that visitors can be centrally viewed when monitoring.CDEAB2Holding the camera unit (C), adjust the position of the metal plate (D) so that the distance betweenthe wireless unit (E) and camera unit (C) matches the width of the door, then temporarily fix theWireless Camera into position by gently tightening the fixing screw (A).3Check that the metal plate (D) of the Wireless Camera does not hit against the door frame whenopening or closing the door.4Check that the Wireless Camera is in a suitable position.RCheck images from the Wireless Camera on the Monitor, and adjust the position of the WirelessCamera as necessary.16Getting Started
5Carefully take the Wireless Camera off the door without loosening the fixing screw, and then removethe silicon paper from the double-sided tape on the back of the metal plate.RWipe dirt and moisture from the surface of the door, then attach the Wireless Camera to a flat areaon the surface of the door.Double-sided tape6Hang the Wireless Camera from the position confirmed in step 4, then press the Wireless Camerainto the door so that the double-sided tape on the back of the metal plate and wireless unit sticks tothe door (A). Make sure that there are no gaps between the top of the door and the metal plate.ABPRESSPRESSARCheck that the wireless unit does not easily move around when the door is closed.RPerform the following when the double-sided tape does not stick well to the door and the WirelessCamera moves around easily.(1) Remove the Wireless Camera from the door.(2) Loosen the fixing screw, widen the distance between camera unit and wireless unit, and thenstick the additional double-sided tape to the back of the wireless unit.Double-sided tape (included)(3) Remove the silicon paper from the double-sided tape, then hang the Wireless Camera fromwhere it was positioned before.(4) After pressing the wireless unit into the door to so that it sticks to the door, adjust the positionof the metal plate so that the distance between the wireless unit and camera unit matches thewidth of the door while holding the camera unit.7Close the door, then firmly tighten the fixing screw (B) while holding the wireless unit to stop it frommoving.RHold the long part of the hex key and firmly tighten the fixing screw.RCheck that the fixing screw has not become loose at regular intervals.17Getting Started
RIf the door is made of wood, make sure to use the included screws to fix the metal plate to the topside of the door. Make sure to get permission from the owner before fixing screws to the door.Important:RBecause the Wireless Camera uses double-sided tape with strong adhesion to prevent it from fallingdown, care is needed when removing the Wireless Camera from the door. (Forcibly removing thedouble-sided tape may damage the surface of the door.)18Getting Started
Monitoring the outsideYou can monitor the images from outside taken by the Wireless Camera.You can perform the following operations during monitoring:RSwitching between Wide/Zoom (page 19)RAdjusting brightness (display) (page 19)MENU1Press M N (Monitor button).RThe outside image will be shown on the display.2To end operations, press M N (Monitor button).Note:RMonitoring lasts for about 20 seconds after M N (Monitor button) is pressed.However, if operations are performed during monitoring, monitoring can be extended to a maximum of3 minutes.RAt night or at other times when the area around the Wireless Camera becomes dark, the image qualitymay be reduced.Adjusting brightness (display)1Press MMENUN while monitoring.2Press MFN or MEN to adjust the brightness.Manipulating displayed images with Wide/Zoom and Pan/TiltDuring monitoring, the display can be temporarily switched between Wide/Zoom, and the Zoom positioncan be changed with pan/tilt operations.Wide display (default setting) Zoom display1Press and hold M N (Monitor button) for about 3 seconds when in the Wide display.RThe display is switched to the Zoom display.19How to use
RTo switch back to the Wide display, press and hold M N (Monitor button) for about 3 secondsagain.2To change the Zoom position with Pan/Tilt, press MDN, MCN, MFN, or MEN when in the Zoom display.RThe Zoom position changes each time MDN, MCN, MFN, or MEN is pressed.Example:BAIn the illustration above, the Zoom position is shown in gray.– Press MFN 1 time: the Zoom position is moved to (A).– Press MCN 1 time: the Zoom position is moved to (B).RThe Zoom position can be moved in the direction of the symbols shown on the screen.Note:RPerforming the above operations only temporarily switches between Wide/Zoom displays. Therefore,images will be displayed according to the default settings the next time images are monitored. Tochange the default settings, change “WIDE/ZOOM SETTINGS” (page 21).RWhen the Zoom position is changed, it is retained and used the next time images are monitored.20How to use
Programming function settingsYou can change the function settings to suit your needs.How to change the function settings1Press MMENUN, then select the “ALL SETTINGS” by pressing MFN or MEN.2Press MN (monitor button) (“OK”), then select the desired item by pressing MDN or MCN.3Press M N (monitor button) (“OK”).4Press MDN or MCN to select the desired setting, then press M N (monitor button) (“OK”).RThis step may vary depending on the feature being programmed.5Press MDN or MCN to select the desired setting, then press MN (monitor button) (“OK”).6To finish the operation, press MMENUN 2 times.Note:RWhen no operation is performed for about 60 seconds during settings, the setting function quits.Function listIn the following list, < > indicates the default settings.Item Function SettingSTART-UPSETTINGSMOTTLED COLORPREVENT<POWER FREQUENCY (60Hz)> / POWER FREQUENCY(50Hz)RTo prevent mottled or uneven color from beingdisplayed, set the power frequency to match the area inwhich you use the unit.LANGUAGESELECTION<ENGLISH> / FRENCH / SPANISH / ARABIANDEFAULT DISPSETTINGSWIDE/ZOOMSETTINGS<WIDE> / ZOOMRSelect how images are initially displayed: Wide or Zoom.CONTRAST When it is difficult to see the monitor display, you canadjust the display contrast. 5 levels are available.OPERATIONGUIDANCE<YES> / NORSelect NO if you do not want the operation guidance(page 11) to be displayed when viewing WirelessCamera images.SAVE CAMERABATTERIES –<OFF> / ONRSelect ON to lengthen the time that the batteries can beused for. (However, by selecting ON, the time it takes todisplay images when monitoring may increase.)RESET SETTINGS–YES / NORIf YES is selected, the Monitor settings are initialized.– Initialization cannot be performed when the WirelessCamera is out of range. Only perform initializationwhen the Wireless Camera is within signal range.21How to use
Replacing batteriesWhen the batteries of the Wireless Camera run out of power ( ), exchange them with new batteries.RONLY USE Alkaline AA (LR6) batteries.RRefer to page 15 for information on how to insert batteries.RTo prevent the Wireless Camera from falling down, make sure to close the door and turn off thepower of the Wireless Camera before replacing batteries.CleaningRClean the unit with a soft, dry cloth. For excessive dirt, wipe the unit with a slightly damp cloth.RWhen cleaning the Monitor and its electrical parts and power plug, make sure to unplug the power plugfrom the power outlet.Important:RDo not use anything containing alcohol, polish powder, powder soap, benzine, thinner, wax, petroleum,or boiling water. Also do not spray with insecticide, glass cleaner, or hair spray. This could cause achange in color or quality.22Useful Information
TroubleshootingDisplay issuesProblem Cause & Solution PageImages appear slightlydistorted.RThis is a characteristic of camera lenses and is not amalfunction. –The image of a person’sface is dark.RWhen there is a backlight in the place where the WirelessCamera is located, the person’s face becomes dark.– Adjust the brightness of the display while monitoring.19The image is not clear oris blurry.RThe surface of the lens of the Wireless Camera is dirty.– Clean it with a dry soft cloth. 22RThe surface of the lens of the Wireless Camera is wet withdew. Wait for the condensation to evaporate. –The image is white orblack.RThe brightness of the display is not properly adjusted.Adjust the brightness while monitoring. 19The image is white, orwhite lines or circles areshown on the display.RStrong light such as sunlight is shining into the lens of theWireless Camera. Though this may cause the displayimage to become difficult to see, this is not a malfunction.– Locate the Wireless Camera away from direct sunlight.–The image is flickering. RThe MOTTLED COLOR PREVENT setting does not matchthe power frequency for the region that you are using theunit in.– Matching the power frequency for the region that you areusing the unit in can improve the quality of the colorsdisplayed. When using the unit in a different region (aftermoving, etc.), match the settings to that region.21RAC (alternating current) lights such as fluorescent lightsmay cause flickering. This is not a malfunction. –The image displayed onthe Monitor distorts or isdisplayed slowly. (It takesabout 5 seconds or moreto be displayed.)RThe distance between the Monitor and Wireless Camera istoo far, or there is a concrete wall or other obstructionbetween the Monitor and Wireless Camera.– Move the Monitor to a location closer to the WirelessCamera that has no obstructions.7MonitorProblem Cause & Solution PageThe Monitor is warm. RThis is normal. (It may feel a little warmer in summer thanin winter.)– If it feels very hot, unplug the power plug from the poweroutlet, then contact our service personnel.–23Help
OthersProblem Cause & Solution PageThe Wireless Camera’sbatteries run out of powerquickly.RThe Wireless Camera is out of range of the Monitor.– When the Wireless Camera is out of range of theMonitor, it repeatedly searches for the Monitor whichcauses the batteries’ power to be consumed faster.Move the Monitor so that it is within range of theWireless Camera.12RThe power plug is unplugged from the power outlet.– When the Monitor is disconnected from the power outletit causes the Wireless Camera to become out of rangefrom the Monitor. This causes the Wireless Camera torepeatedly search for the Monitor which results in thebatteries’ power being consumed faster. Whenunplugging the power plug of the Monitor, turn the slideswitch of the Wireless Camera to OFF.–RYou are using rechargeable batteries.– Depending on the capacity of the rechargeable batteries,their life span may become shorter. This is not amalfunction.–There is a power failure. RThe unit does not work during a power failure. –The unit does not workwith correct operations.(The unit does not workproperly.)RPerform the following operations.Wireless Camera:Replace the batteries. 22Monitor:Disconnect it from the power outlet and then reconnect it afterwaiting for about 10 seconds.– Program settings are not affected.–24Help
Error messagesProblem Cause & Solution PageCANNOT CONNECT TOCAMERAThe following may be causing the problem.RThe Wireless Camera is turned off.– Turn the Wireless Camera on. 9RThe batteries of the Wireless Camera have run out ofpower.– Replace the batteries.22RThe Wireless Camera is turned on, but the WirelessCamera is out of range from the Monitor.– Move the Monitor to an area close to the WirelessCamera that has no obstructions between the WirelessCamera and Monitor. (When the Wireless Camera is inrange of the Monitor it can connect to the Monitor.)– Turn the power for the Wireless Camera off then on.(When the Wireless Camera is in range of the Monitor itcan connect to the Monitor.)– When using a replacement Wireless Camera whenservicing your original Wireless Camera, thereplacement Wireless Camera must be paired to theMonitor. Refer to the following for instructions on how topair the Wireless Camera.79n How to pair Wireless CamerasAfter performing operations on the Monitor, performoperations on the Wireless Camera within about 2 minutes.Monitor operations:A Press MMENUN, MDN, and M N (Monitor button) at thesame time. (Enters CAMERA PAIRING MODE.)B Press M N (Monitor button).Wireless Camera operations:C Insert the batteries (page 15).D Turn the power for the Wireless Camera on while pressingthe pair button with a pointed object (keep pressing the pairbutton until the pair indicator starts flashing).RThe pair indicator starts flashing quickly.–The pair indicator changes in the following mannerwhen pairing is successfully completed:flash quickly ® light for about 10 seconds ® go out–The pair indicator changes in the following mannerwhen pairing fails (Pairing must be performedagain.):flash quickly ® go out25Help
SpecificationsMonitor (VL-DM100A)n Power supply:120 V AC, 60 Hzn Power consumption:During standby: approx. 1 W@During operations: approx. 2 W@n Dimensions (H ´ W ´ D):Approx. @16.5 mm (5/8 in.) ´ @126 mm (4 15/16 in.) ´ @59 mm (2 5/16 in.) @(excluding protrudingsections)– When using the Cradle: approx. @47 mm (1 7/8 in.) ´ @131 mm (5 3/16 in.) ´ @78 mm (3 1/16 in.)@(excluding protruding sections)n Weight:Approx. @200 g (0.44 lb) (including the Cradle)n Operating temperature:0 °C to 40 °C (32 °F to 104 °F)n Operating humidity:Up to 90 % RH (Relative Humidity) non condensingn Display:2.2" color TFT LCD monitorn Wireless transmission method:@1.9 GHz TDMA-WB@Wireless Camera (VL-CM850A)n Power supply:Alkaline AA battery ´ 4n Battery life:Maximum 6 months*1*2*1 When operated under battery saving mode.*2 When used 5 times a day (displaying images for about 20 seconds each time) with a temperature of20 °C (68 °F).n Dimensions (H ´ W ´ D):RWireless unit:Approx. 190 mm (7 1/2 in.) ´ 165 mm (6 1/2 in.) ´ 38 mm (1 1/2 in.) @(excluding protruding sections)RCamera unit:Approx. @37 mm (1 7/16 in.) ´ @87.5 mm (3 7/16 in.) ´ @40 mm (1 9/16 in.) @(excluding protrudingsections)n Weight:Approx. @320 g (0.71 lb) (excluding batteries)n Operating temperature:RWireless unit:0°C to 40 °C (32 °F to 104 °F)RCamera unit:-20°C to 50 °C (-4 °F to 122 °F)26General Information
n Operating humidity:Up to 90 % RH (Relative Humidity) non condensingn Installation method:Attached to a doorn Wireless transmission method:1.9 GHz TDMA-WBn Minimum illuminance:3 lxn Water resistant proprieties:IPx3 equivalent (Camera unit)*1*1 IPX-3 specifies protection against spraying water and water spraying up to 60° from vertical.@n Viewing angle:RHorizontal: approx. 120°RVertical: approx. 90°n Transmission frequency:@19xx MHz - 19xx MHzn Transmitting range:Approx. 70 m (229 ft 8 in.) (line-of-sight distance)27General Information
For users in the United States Only (FCC and otherinformation)This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesiredoperation.CAUTION:Any changes or modifications not expressly approved by the party responsible for compliance could voidthe user’s authority to operate this device.NOTE:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuantto Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmfulinterference in a residential installation. This equipment generates, uses, and can radiate radio frequencyenergy and, if not installed and used in accordance with the instructions, may cause harmful interferenceto radio communications. However, there is no guarantee that interference will not occur in a particularinstallation. If this equipment does cause harmful interference to radio or television reception, which canbe determined by turning the equipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures:– Reorient or relocate the receiving antenna.– Increase the separation between the equipment and receiver.– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.– Consult the dealer or an experienced radio/TV technician for help.FCC RF Exposure WarningRThis product complies with FCC radiation exposure limits set forth for an uncontrolled environment.RTo comply with FCC RF exposure requirements, the unit must be installed and operated 20 cm (8inches) or more between the product and all person’s body (excluding extremities of hands, wrist andfeet).RThis product may not be collocated or operated in conjunction with any other antenna or transmitter.Notice:FCC ID can be found on the bottom of the Wireless Camera and on the electrical parts of the Monitor.28General Information
For users in Canada Only (Industry Canada Notices andother information)NOTICE:This product meets the applicable Industry Canada technical specifications.RF Exposure Warning:RThis product complies with IC radiation exposure limits set forth for an uncontrolled environment.RTo comply with IC RF exposure requirements, the unit must be installed and operated 20 cm (8inches) or more between the product and all person’s body (excluding extremities of hands, wrist andfeet).RThis product may not be collocated or operated in conjunction with any other antenna or transmitter.This Class B digital apparatus complies with Canadian ICES-003.29General Information
Quick Reference Guide (in Spanish)AFixing screwBCamera unitCDCamera lensEFWireless unitGMagnet/rubberHPower slide switch (ON / OFF)IPair buttonJPair indicatorKSlide leverVL-CM850AQuick Reference GuideLocation of controlsBottom viewBICFDEGAJKBattery caseCable protection sheetH30Quick Reference Guide (in Spanish)
VL-DM100A AMenu buttonBMonitor buttonCNavigator keyDMonitor displayCradleThe Monitor can be hung from a wall by passing straps the holes.EElectrical partsFPower plugUse the Cradle to hold the Monitor.EBottom viewMENUDACBF31Quick Reference Guide (in Spanish)
To monitor(Monitor button) ( ). to finish.To switch the displayed image between Wide display and Zoom display(The default is wide.) () for about 3 seconds to switch between The number after the button shows the location of the button described in the previous page.Basic OperationsPress MNWide display and Zoom display.(Monitor button)Press MN(Monitor button)Press MNBB32Quick Reference Guide (in Spanish)
Customer services (For United States)33Appendix
Warranty (For United States)34Appendix
35Appendix
Warranty (For Canada)36Appendix
37Appendix
IndexAAdjusting the display brightness: 19BBatteries (Alkaline batteries): 15, 22Battery case: 9, 15CCamera lens: 9Camera unit: 9, 13, 14, 16Cleaning: 22Contrast: 21Cradle: 11DDisplay: 10, 11EElectrical parts: 10GGuidance: 11, 21MMenu button: 10When lit in red: 12Monitoring (the outside): 19Adjusting the display brightness: 19Switching between Wide/Zoom view: 19Switching zoom position (Pan/Tilt): 20NNavigator key: 10OOperation guidance: 11, 21PPair button: 9, 25Pair indicator: 9, 15, 25Pan/Tilt (switching zoom position): 20Power slide switch: 9, 15QQuick Reference Guide: 30RRemaining battery power (Alkalinebatteries): 11, 12Resetting function settings: 21SSignal status display (Monitor/WirelessCamera): 11, 12Slide lever: 10, 15Slide switch: 9, 15Specifications: 26Switching between Wide/Zoom viewChanging the default display settings: 21Switching while monitoring: 19Symbols: 11, 12WWide display: 19Wireless unit: 9, 15ZZoom display: 1938Index
39Notes
For your future referenceDate of purchaseSerial number (found on the bottom of the Monitor)Dealer’s name and addressDealer’s telephone numberAttach your sales receipt here.For customers in Canada:5770 Ambler Drive, Mississauga, Ontario L4W 2T3For customers in the U.S.A:One Panasonic Way, Secaucus, New Jersey 07094For assistance, visit our website:http://www.panasonic.comfor customers in the U.S.A. and Puerto Rico.© Panasonic System Networks Co., Ltd. 2012Printed in Vietnam*SDM100A**SDM100A* PNQX5703ZA CC0812MM0

Navigation menu