Panasonic of North America 9TGCF-182 PCS1900 Module build-in Notebook User Manual

Panasonic Corporation of North America PCS1900 Module build-in Notebook Users Manual

Users Manual

Download: Panasonic of North America 9TGCF-182 PCS1900 Module build-in Notebook User Manual
Mirror Download [FCC.gov]Panasonic of North America 9TGCF-182 PCS1900 Module build-in Notebook User Manual
Document ID331670
Application IDzyrG5D8UyZ7gk+geUipozg==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize20.49kB (256183 bits)
Date Submitted2003-06-11 00:00:00
Date Available2003-06-11 00:00:00
Creation Date2003-05-22 10:34:45
Producing SoftwareAcrobat Distiller 5.0.5 (Windows)
Document Lastmod2003-05-22 10:34:45
Document TitleUsers Manual

®
Supplementary Instructions
for GSM/GPRS
This manual contains supplementary instructions regarding the use of the computer. It explains the cases where the operation of the computer differs from that in the Operating
Instructions.
Your computer is equipped with GSM/GPRS enabling you to communicate using radio
frequencies.
Contents
Precautions .................................................................. 2
Names and Functions of Parts ................................... 5
Installing/Removing a SIM Card ................................. 7
Installing the Software................................................. 8
Appendix .................................................................... 13
Specifications ............................................................ 14
Illustrations and Terminology in this Manual
NOTE:
CAUTION:
NOTE provides a useful fact or helpful information.
CAUTION indicates a condition that may result in minor or moderate injury.
Windows 2000 : Information for Microsoft® Windows® 2000 Professional users.
Windows XP
: Information for Microsoft® Windows® XP Professional users.
Tablet PC
: Information for Microsoft® Windows® XP Tablet PC Edition users.
[Start] - [Run]:
This illustration means to click [Start], then to click [Run].
(For some applications, you may need to double-click.)
About the abbreviations in this manual, refer to the table on page 13.
Windows 2000 screens are used in this manual when no specific OS notes are required.
Precautions
Safety Precautions
The following safety precautions must be observed during all phases of the operation, usage, service or repair of any Personal Computer or Handheld Computer incorporating GSM/
GPRS modem. Manufacturers of the cellular terminal are advised to convey the following
safety information to users and operating personnel and to incorporate these guidelines into
all manuals supplied with the product. Failure to comply with these precautions violates
safety standards of design, manufacture and intended use of the product. Panasonic assumes no liability for customer failure to comply with these precautions.
When in a hospital or other health care facility, observe the restrictions on the use
of mobiles. Switch Personal Computer or Handheld Computer incorporating GSM/
GPRS modem off, if instructed to do so by the guidelines posted in sensitive
areas. Medical equipment may be sensitive to RF energy.
The operation of cardiac pacemakers, other implanted medical equipment and
hearing aids can be affected by interference from Personal Computer or Handheld
Computer incorporating GSM/GPRS modem placed close to the device. If in
doubt about potential danger, contact the physician or the manufacturer of the
device to verify that the equipment is properly shielded. Pacemaker patients are
advised to keep their Personal Computer or Handheld Computer incorporating
GSM/GPRS modem away from the pacemaker, while it is on.
Switch off Personal Computer or Handheld Computer incorporating GSM/GPRS
modem before boarding an aircraft. Make sure it cannot be switched on inadvertently.
The operation of wireless appliances in an aircraft is forbidden to prevent interference
with communications systems. Failure to observe these instructions may lead to the
suspension or denial of cellular services to the offender, legal action, or both.
Do not operate Personal Computer or Handheld Computer incorporating GSM/
GPRS modem in the presence of flammable gases or fumes. Switch off the cellular terminal when you are near petrol stations, fuel depots, chemical plants or
where blasting operations are in progress. Operation of any electrical equipment
in potentially explosive atmospheres can constitute a safety hazard.
Your Personal Computer or Handheld Computer incorporating GSM/GPRS modem receives and transmits radio frequency energy while switched on. Remember
that interference can occur if it is used close to TV sets, radios, computers or inadequately shielded equipment. Follow any special regulations and always switch off
Personal Computer or Handheld Computer incorporating GSM/GPRS modem wherever forbidden, or when you suspect that it may cause interference or danger.
Road safety comes first! Do not use a Personal Computer or Handheld Computer
incorporating GSM/GPRS modem while driving a vehicle. Do not place the computer with GSM/GPRS modem in an area where it could cause personal injury to the
driver or passengers. It is recommended to stow the unit in the boot or secure stowage
area while driving.
Do not place the computer with GSM/GPRS modem in an area over an air bag or in the
vicinity where an air bag may deploy.
Air bags inflate with great force and if the computer with GSM/GPRS modem is
placed in the air bag deployment area may be propelled with great force and cause
serious injury to occupants of the vehicle.
IMPORTANT!
Personal Computer or Handheld Computer incorporating GSM/GPRS modem
operate using radio signals and cellular networks cannot be guaranteed to connect in all conditions. Therefore, you should never rely solely upon any wireless
device for essential communications, for example emergency calls.
Remember, in order to make or receive calls, Personal Computer or Handheld
Computer incorporating GSM/GPRS modem must be switched on and in a service area with adequate cellular signal strength.
Some networks do not allow for emergency calls if certain network services or
phone features are in use (e.g. lock functions, fixed dialing etc.). You may need to
deactivate those features before you can make an emergency call.
Some networks require that a valid SIM card be properly inserted in Personal
Computer or Handheld Computer incorporating GSM/GPRS modem.
For Europe
Declaration of Conformity (DoC)
“Hereby, we and Panasonic Testing Centre (Europe) GmbH (PTC), declares
that this Personal Computer is in compliance with the essential requirements
and other relevant provisions of the Directive 1999/5/EC.
Hint:
If you want to get a copy of the original DoC of our products which relates to the R&TTE, please
contact to our web address: http://doc.panasonic-tc.de
Compliance Notice - CE Mark
This equipment is in conformance with the requirements of the European Council Directive listed
below:
73/23/EEC Low Voltage Directive with amendment 93/68/EEC
89/336/EEC EMC Directive with amendments 92/31/EEC and 93/68/EEC
This Notice is based upon compliance of the product to the following standards:
EN60950
EN55022
EN61000-3-2
EN61000-3-3
EN55024
3GPP TS51.010-1: v4.9.0
EN 301 511: v7.0.1
EN 301 489 -1, -7
EN50385
Interface Cable
Use of an interface cable longer than 3 m (9.84 feet) is not recommended.
Precautions
For U.S.A.
Radio frequency exposure information
In August 1996, the Federal Communications Commisision (FCC) of the U.S. adopted an
updated safety standard for human exposure to radio frequency electromagnetic energy
emitted by FCC regulated transmitters. The design of this device complies with the FCC
guidelines and those standards.
To maintain compliance with FCC RF exposure guidelines, ensure the antenna is at least 1.5
cm from your body when transmitting. Use of non-approved accessories may violate FCC
RF exposure guidelines.
Names and Functions of Parts
Except the followings, refer to the Operating Instructions.
Antenna
Headset jack
LED Indicators
page 6)
Headset
checknet.pdf “Operating Instructions for
using GSM/GPRS”)
SIM Card Slot
page 7)
(Appearance may differ depending on specifications.)
Names and Functions of Parts
LED Description
GSM/GPRS Switch
The GSM/GPRS modem powers up independently from the computer
regardless of the computer power status and will remain on when the
computer’s power is off. This function depends on the setting of the
Setup Utility.
Power On Indication - Green:
A green LED will be used to signal when the GSM/GPRS modem has
been powered on.
Ring Indication - Amber:
The LED will flash when the GSM/GPRS modem has received a ring.
Status Indication - Green:
The LED will light while communicating.
Mode
Off
Function
GSM/GPRS modem is off or running in SLEEP or
Alarm.
600 ms On/
600 ms Off
No SIM card inserted or no PIN entered, or network
search in progress, or ongoing user authentication,
or network login in progress.
75 ms On/3 s Off Logged to network (monitoring control channels
and user interactions). No call in progress.
75 ms On/75 ms Off/ One or more GPRS contexts activated.
75 ms On/3 s Off
Flashing
Indicates GPRS data transfer: When a GPRS
transfer is in progress, the LED goes on within 1
second after data packets were exchanged. Flash
duration is approximately 0.5 s.
On
Depending on type of call:
Voice call: Connected to remote party.
Data call: Connected to remote party or exchange of
parameters while setting up or disconnecting a call.
Installing/Removing a SIM Card
Before using GSM/GPRS, set a SIM card to the SIM card slot.
CAUTION
Do not install/remove the SIM card when the GSM/GPRS modem’s power is on.
1 Power off your computer and GSM/
GPRS modem
Installing a SIM card
Insert the SIM card into the SIM card slot with
the contact side facing downward and with the
cut corner in front.
CAUTION
Contact
SIM Card
Do not insert the SIM card upside down.
Close the cover.
If the cover is not closed, the SIM card may jump
out when the computer falls.
Removing a SIM card
Press the card.
It will come out of the slot a little bit.
Pull the card all the way out.
Installing the Software
Turn on or restart the computer.
Press F2 while [Panasonic] screen is displayed soon after
the computer begins the startup procedure.
If [Enter Password] is displayed, enter your password.
Select the [Advanced] menu and confirm the followings.
page 13)
The serial port’s setting is optimal.
[On & Off] is selected at [Power SYNC with PC].
If [On & Off] is not set, confirm the power to the GSM/GPRS modem is on.
Save the settings and exit the Setup Utility.
Input [c:\util\drivers\checknet\setup.exe]
in [Start] - [Run] and select [OK].
Follow the on-screen instructions.
When the message on the right is displayed, select [OK].
At [Winmux Driver Setup] screen, select
[Start Scan].
All GSM/GPRS modems installed in the computer will
be listed in [Modem List].
6
Confirm that the check mark is added
for the serial port you use and select [Install Driver].
Installation will start.
(If the message “Digital Signature Not Found” is displayed, select [Yes].)
When the installation is complete, select [OK].
Select [Finish] to restart the computer.
After the computer is restarted, CheckNet runs automatically.
Windows 2000
Select [Start] - [Settings] - [Control Panel] - [Phone and Modem Options] - [Modems].
Windows XP
Tablet PC
Select [Start] - [Control Panel] - [Printers and Other Hardware]
- [Phone and Modem Options] - [Modems].
Select [Add].
Installing the Software
10
Add the check mark for [Don’t detect my
modem; I will select it from a list], then
select [Next].
11
Select [Have Disk].
12
Input [c:\program files\panasonic\
checknet*1\modem] and select [OK].
*1 This indicates the folder where CheckNet is installed in
step 4. This will vary depending on your computer’s setup.
13
Select your GSM/GPRS modem in the
list and select [Next].
To confirm the model number of your GSM/GPRS modem, run CheckNet and select [About]. (
checknet.pdf “Operating Instructions for using GSM/
GPRS”)
14
Select “Selected ports” and select the
com port for Virtual Port 1.
You can confirm the port number in [Device Manager]*1
- [Multi-port serial adatpters] - [Serial Multiplexer] - [Port
Settings].
*1 Windows 2000 :
in [Start] - [Settings] - [Control Panel] - [System] [Hardware]
Windows XP
Tablet PC :
in [Start] - [Control Panel] - [Performance and Maintenance] - [System] - [Hardware]
10
15
Select [Next].
If the message “Digital Signature Not Found” is displayed, select [Yes].
16
Select [Finish].
17
Making extra settings for GPRS modem.
Select your GSM/GPRS modem and select [Properties] in [Phone and Modem Options] - [Modems].
In [Advanced], enter the extra initialization commands as follows. (
checknet.pdf
“Operating Instructions for using GSM/GPRS”)
AT+CGDCONT=,,

Example: :1, :ip, :internet.t-d1.de
AT+CGDCONT=1,ip,internet.t-d1.de

(Note that the APN shown here represents the German network provider T-D1 and
needs to be replaced with the APN address supplied by your own network provider.)
Select [OK].
11
Installing the Software
Uninstalling the Software
CheckNet
Use the following menu.
Windows 2000 : [Start] - [Settings] - [Control Panel] - [Add/Remove Programs]
Windows XP
Tablet PC : [Start] - [Control Panel] - [Add or Remove Programs]
Wireless module multiplex driver
Select [Device Manager]*1-[Multi-port serial adapters]-[Serial Multiplexer] and uninstall
the driver.
*1 Windows 2000 : in [Start] - [Settings] - [Control Panel] - [System] - [Hardware]
Windows XP
Tablet PC : in [Start] - [Control Panel] - [Performance and Maintenance] - [System] - [Hardware]
12
Appendix
Setup Utility
The following parameters have been added in [Advanced] menu of the Setup Utility.
Tablet PC
Wireless Modem
Disable
Enable
Power SYNC with PC Independent On & Off
Windows 2000
Off Only
Windows XP
Wireless Modem
Port1 I/O IRQ*
Port2 I/O IRQ*
Disable
Enable
Auto
3F8/IRQ4
3F8/IRQ4
2F8/IRQ3
2F8/IRQ3
3E8/IRQ7
3E8/IRQ7
Power SYNC with PC Independent On & Off
2E8/IRQ5
2E8/IRQ5
Off Only
* This item is displayed only when [Wireless Modem] is set to [Enable].
Abbreviations
APN
Access Point Name
CID
Context Identity
GPRS
GSM
General Packet Radio Service
Global System of Mobile Communication
IP
PDP
Internet Protocol
Packet Data Protocol
PIN
PLMN
Personal Identification Number
Public Land Mobile Network
PPP
QoS
Point to Point Protocol
Quality of Service
SIM
TCP
Subscriber Identity Module
Traffic Control Protocol
13
Specifications
Type
Class
Compliant with ETSI GSM phase 2/2+ standard
EGSM900 Class 4 (2 W) / DCS1800 Class 1 (1 W)
SIM
RF Specification Transmit
Internal SIM card (3 V only)
EGSM900 (880 MHz to 915 MHz) / DCS1800
(1710 MHz to 1785 MHz)
Receive
Data Features
Data
Fax
SMS
Voice Feature
Interface
GPRS
14
Multi-Slot
Mobile Station
EGSM900 (925 MHz to 960 MHz) / DCS1800
(1805 MHz to 1880 MHz)
asynchronous transparent & non-transparent
300 bps/ 1200 bps / 1200/75 bps / 2400 bps/ 4800
bps / 9600 bps / 14400 bps
facsimile group 3, Class 2
MT/PP(Mobile Terminating Short Message
Service, Point to Point)
MO/PP(Mobile Originating Short Message
Service, Point to Point)
CB (Cell Broadcast Short Message Service)
HR (Half rate)
FR (Full rate)
EFR (Enhanced full rate)
AT Commands (GSM 07.07)
Class 10
Class B
Memo
15
© 2003 Matsushita Electric Industrial Co., Ltd. All Rights Reserved.
DFQX5405ZA

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Create Date                     : 2003:05:22 10:34:45+09:00
Modify Date                     : 2003:05:22 10:34:45+09:00
Page Count                      : 16
Creation Date                   : 2003:05:22 01:34:45Z
Mod Date                        : 2003:05:22 01:34:45Z
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Metadata Date                   : 2003:05:22 01:34:45Z
EXIF Metadata provided by EXIF.tools
FCC ID Filing: ACJ9TGCF-182

Navigation menu