Panasonic of North America 9TGCF-185 CF-18 Personal Computer with WLAN+BT+GPRS User Manual 18MK2 X E OI cover1 pm6

Panasonic Corporation of North America CF-18 Personal Computer with WLAN+BT+GPRS 18MK2 X E OI cover1 pm6

UserManual.wiki >

Panasonic of North America >

9TGCF-185 User Manual >

User Manual Amended

OperationStarting Up/Shutting Down ............................ 17Touch Pad (Basic Operation) ............................. 20Touchscreen (Basic Operation).......................... 21Operating in Tablet Mode .............................. 22Reference Manual ......................................... 24Useful Information ......................................... 25OPERATING INSTRUCTIONSPersonal ComputerAppendixLIMITED USE LICENSE AGREEMENT ........ 36Hard Disk Backup Function ............................. 38Hard Disk Data Erase Utility .......................... 42Specifications ................................................ 43LIMITED WARRANTY ................................... 45TroubleshootingList of Error Codes ........................................ 28Dealing with Problems (Summary) .................. 29Reinstalling Software .................................... 34Getting StartedRead Me First.................................................. 3Names and Functions of Parts ........................ 8First-time Operation ...................................... 12Contents[Additional Manual]Reference ManualThis manual can be accessed on your computer. Referto page 24 on how to access the Reference Manual.Reference Manual•Read Me First•Key CombinationsReference Manual•Tablet Buttons•Touch Pad•Touchscreen•Software keyboard•Panasonic Hand Writing•Display Rotation•Standby/HibernationFunctions•Security Measures•Computing on the Road•Battery Power•PC Cards•RAM Module•Port Replicator•External Display•USB Devices•Modem•LAN•Wireless LAN•Hard Disk Drive•Setup Utility•Icon Enlarger•LED IndicatorsReference Manual•Technical Information•DMI Viewer•List of Error Codes•Dealing with Problems(Advanced)Appendix Getting StartedOperationTroubleshootingModel No. CF-18 SeriesXPPlease read these instructions carefully before using this product and save this manual for future use.

3Getting StartedRead Me FirstFederal Communications Commission RadioFrequency Interference StatementNote: This equipment has been tested and found to comply withthe limits for a Class B digital device, pursuant to Part 15 of theFCC Rules. These limits are designed to provide reasonableprotection against harmful interference in a residentialinstallation. This equipment generates, uses and can radiate radiofrequency energy and, if not installed and used in accordancewith the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee thatinterference will not occur in a particular installation. If thisequipment does cause harmful interference to radio or televisionreception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interferenceby one or more of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit differentfrom that to which the receiver is connected.Consult the Panasonic Service Center or an experienced ra-dio/TV technician for help.WarningTo assure continued compliance, use only shielded interfacecables when connecting to a computer or peripheral. Also,any changes or modifications not expressly approved by theparty responsible for compliance could void the user’s author-ity to operate this equipment.FCC RF Exposure Warning:This equipment complies with FCC radiation exposure lim-its set forth for an uncontrolled environment.This equipment has been approved for portable operation,and unless otherwise advised in separate supplemental in-structions for individual wireless transmitter(s), requiresminimum 1.5 cm spacing be provided between antenna(s)and all person’s body (excluding extremities of hands, wristand feet) during wireless modes of operation.This equipment may use multiple installed transmitters,which may be capable of simultaneous transmission.This equipment is provided with PC Card slot that could beused with wireless transmitters, which will be specificallyrecommended when they become available.Other third-party wireless transmitters have not been RF ex-posure evaluated for use with this computer and may notcomply with FCC RF exposure requirements.This equipment is provided with external antennaconnector(s) for connection to optional Car Mounter orPort Replicator for mobile external mounted antenna(s).External antenna(s) must be professionally installed andcannot exceed recommended maximum antenna gain asdescribed in individual provided supplement instructionsfor wireless transmitters. Also, user must maintain mini-mum 20 cm spacing between external antenna(s) and allperson’s body (excluding extremities of hands, wrist andfeet) during wireless modes of operation.This device complies with Part 15 of the FCC Rules. Operationis subject to the following two conditions:(1) This device may not cause harmful interference, and(2) This device must accept any interference received, includinginterference that may cause undesired operation.Responsible Party: Matsushita Electric Corporation of AmericaOne Panasonic WaySecaucus, NJ 07094Tel No:1-800-LAPTOP-5 (1-800-527-8675)For U.S.A.1. This equipment complies with CFR47 Part 68 rules. On thecomputer is a label that contains, among other information,the FCC registration number and ringer equivalence number(REN) for this equipment. If required, this information mustbe provided to the telephone company.2. An FCC compliant telephone cord and modular plug is pro-vided with this equipment. This equipment is designed to beconnected to the telephone network or premises wiring us-ing a compatible modular jack which is Part 68 compliant.See Installation Instructions for details.3. The REN is used to determine the quantity of devices whichmay be connected to the telephone line. Excessive RENs onthe telephone line may result in the devices not ringing in re-sponse to an incoming call. In most, but not all area, the sumof RENs should not exceed five (5.0). To be certain of thenumber of devices that may be connected to a line, as deter-mined by the total RENs, contact the local telephone com-pany.4. If your telephone equipment cause harm to the telephone net-work, the telephone company will notify you in advice thattemporary discontinuance of service may be required. But ifadvice notice isn’t practical, the telephone company will no-tify the customer as soon as possible. Also, you will be ad-vised of your right to file a complaint with the FCC if youbelieve it is necessary.5. The telephone company may take changes in it’s facilities,equipment, operations or procedures that could affect the op-eration of the equipment. If this happens the telephone com-pany will provide advance notice in order for you to makenecessary modifications to maintain uninterrupted service.6. If trouble is experienced with this equipment, for repair orwarranty information, please contact Matsushita ElectricCorporation of America at DIAL TOLL FREE 1-800-LAP-TOP5 (1-800-527-8675). If the equipment is causing harmto the telephone network, the telephone company may re-quest that you disconnect the equipment until the problem isresolved.7.There are no user serviceable parts contained in this equipment.8. This equipment may not be used on coin service provided bythe telephone company. Connection to party lines is subjectto state tariffs.9. The Telephone Consumer Protection Act of 1991 makes itunlawful for any person to use a computer or other electronicdevice to send any message via a telephone fax machine un-less such message clearly contains in a margin at the top orbottom of each transmitted page or on the first page of thetransmission, the date and time it is sent and an identificationof the business or other entry, or other individual sending themessage and the telephone number of the sending machineor such business, other entity, or individual. In order to pro-gram this information into your fax software, you should re-fer to the manual of the Fax software being used.FCC Regulation Notice for modemThis equipment contains a FCC approved modem.Manufacturer of modem: AMBIT Microsystems CorporationModel No. T60M283.** (** = numbers or alphabet letters)FOR HOME OR OFFICE USETested To ComplyWith FCC Standards

4Getting StartedRead Me FirstFor CanadaIndustry Canada (IC) Notice for modemThis equipment contains an Industry Canada approved modem unit.The Industry Canada label is affixed on the modem unit.EQUIPMENT ATTACHMENT LIMITATIONS“NOTICE: The Industry Canada label identifies certifiedequipment. This certification means that the equipment meetstelecommunications network protective, operational andsafety requirements as prescribed in the appropriate TerminalEquipment Technical Requirements document(s). TheDepartment does not guarantee the equipment will operateto the user’s satisfaction.Before installing this equipment, users should ensure that itis permissible to be connected to the facilities of the localtelecommunications company. The equipment must also beinstalled using an acceptable method of connection. Thecustomer should be aware that compliance with the aboveconditions may not prevent degradation of service in somesituations.Repairs to certified equipment should be coordinated by arepresentative designated by the supplier. Any repairs oralterations made by the user to this equipment, or equipmentmalfunctions, may give the telecommunications companycause to request the user to disconnect the equipment.Users should ensure for their own protection that theelectrical ground connections of the power utility, telephonelines and internal metallic water pipe system, if present, areconnected together. This precaution may be particularlyimportant in rural areas. Caution: Users should not attemptto make such connections themselves, but should contactthe appropriate electric inspection authority, or electrician,as appropriate.”“NOTICE: The Ringer Equivalence Number (REN) assignedto each terminal device provides an indication of themaximum number of terminals allowed to be connected to atelephone interface. The termination on an interface mayconsist of any combination of devices subject only to therequirement that the sum of the Ringer Equivalence Numbersof all the devices does not exceed 5.”REN: See bottom of the computerRESTRICTIONS CONCERNANT LE RACCORDEMENTDE MATÉRIEL“AVIS: L’étiquette d’Industrie Canada identifie le matérielhomologué. Cette étiquette certifie que le matériel estconforme aux normes de protection, d’exploitation et desécurité des réseaux de télécommunications, comme leprescrivent les documents concernant les exigencestechniques relatives au matériel terminal. Le Ministèren’assure toutefois pas que le matériel fonctionnera à lasatisfaction de l’utilisateur.Avant d’installer ce matériel, l’utilisateur doit s’assurer qu’ilest permis de le raccorder aux installations de l’entrepriselocale de télécommunication. Le matériel doit également êtreinstallé en suivant une méthode acceptée de raccordement.L’abonné ne doit pas oublier qu’il est possible que laconformité aux conditions énoncées ci-dessus n’empêchepas la dégradation du service dans certaines situations.Les réparations de matériel homologué doivent êtrecoordonnées par un représentant désigné par le fournisseur.L’entreprise de télécommunications peut demander àl’utilisateur de débrancher un appareil à la suite deréparations ou de modifications effectuées par l’utilisateurou à cause de mauvais fonctionnement.Pour sa propre protection, l’utilisateur doit s’assurer que tousles fils de mise à la terre de la source d’énergie électrique,des lignes téléphoniques et des canalisations d’eaumétalliques, s’il y en a, sont raccordés ensemble. Cetteprécaution est particulièrement importante dans les régionsrurales. Avertissement: L’utilisateur ne doit pas tenter de faireces raccordements lui-même; il doit avoir recours à un serviced’inspection des installations électriques, ou à un électricien,selon le cas.”“AVIS: L’indice d’équivalence de la sonnerie (IES) assignéà chaque dispositif terminal indique le nombre maximal determinaux qui peuvent être raccordés à une interface. Laterminaison d’une interface téléphonique peut consister enune combinaison de quelques dispositifs, à la seule conditionque la somme d’indices d’équivalence de la sonnerie de toutsles dispositifs n’excède pas 5.”IES: Voir sous le fond de l’ordinateur10.According to the FCC’s electrical safety advisory, we recom-mend that you may install an AC surge arrestor in the AC out-let to which this equipment is connected. Telephone compa-nies report that electrical surges, typically lightning transients,are very destructive to customer terminal equipment connectedto AC power sources and that this is a major nationwide prob-lem.“Caution: To reduce the risk of fire, use only No.26 AWG or larger telecom-munication line cord.”“ATTENTION: Pour réduire le risque d’incendie, utiliser uniquement desconducteurs de télécommunications 26 AWG ou de section supérieure.”Notice for the products using LCDThis product uses one or more fluorescent lamps containing asmall amount of mercury. It also contains lead in some compo-nents. Disposal of these materials may be regulated in your com-munity due to environmental considerations. For disposal orrecycling information please contact your local authorities, orthe Electronics Industries Alliance: <http://www.eiae.org/>Industry CanadaThis product complies with RSS210 Industry Canada.Operation is subject to the following two conditions;(1) this device may not cause interference, and(2) this device must accept any interference, including interfer-ence that may cause undesired operation of the device.

5Getting StartedDeclaration of Conformity (DoC)“Hereby, we and Panasonic Service Europe GmbH (PSE), declares that this Personal Computer is in compliancewith the essential requirements and other relevant provisions of the Directive 1999/5/EC.”Hint:If you want to get a copy of the original DoC of our products which relates to the R&TTE, please contact to ourweb address: http://doc.panasonic-tc.deNetwork connection.The terminal equipment is intended for connection to the following public network;In all the countries of European Economical Area;- Public Switched Telephony NetworksTechnical Features.The terminal equipment includes the following features;- DTMF dialing- Maximum bitrate receiving mode: 56 kbits/s- Maximum bitrate sending mode: 33.6 kbit/sThis product is designed to interwork with the Public Switched Telecommunication Networks in UK, Ireland, Netherlands, Swe-den, Denmark, Finland, Switzerland, Luxembourg, Belgium, France, Germany, Spain, Portugal, Iceland, Greece, Italy, Norwayand Austria.--------------------------------------------------------------------------------------------------------------------------------------------Compliance Notice - CE MarkThis equipment is in conformance with the requirements of the European Council Directive listed below:73/23/EEC Low Voltage Directive with amendment 93/68/EEC89/336/EEC EMC Directive with amendments 92/31/EEC and 93/68/EEC1999/5/EC--------------------------------------------------------------------------------------------------------------------------------------------For Europe

6Getting StartedAvoid Magnetic FieldsKeep the computer away from magnets.Data stored on the hard disk may be lost.Keep Small Objects AwayDo not insert paper clips or other small objectsinto the computer.Do Not Disassemble the ComputerDo not attempt to disassemble your computer.Avoid Excessive Force on the DisplayDo not apply excessive downward force on thedisplay when it is completely opened, especiallywhen plugs and/or cables are connected to therear of the computer.Avoiding low-temperature burnsAvoid more than casual contact with any heatproducing area of the notebook computer, ACadaptor, and any option or accessory you use withit. Even low heat, if warmer than body tempera-ture, can cause a burn, if the skin is exposed tothe heat source for a long enough period of time.Avoid Radio Frequency InterferenceDo not place the computer near a television orradio receiver.PrecautionsThe CF-18 was developed based on thorough research into thereal-world portable computing environments. Exhaustive pur-suit of usability and reliability under harsh conditions led to in-novations such has the magnesium alloy exterior, vibrationdamped hard disk drive and floppy disk drive, flexible internalconnections. The CF-18’s outstanding engineering has beentested using the stiff MIL-STD- 810F (for vibration and shock)and IP (for dust and water) based procedures.As with any portable computer device precautions should betaken to avoid any damage. The following usage and handlingprocedures are recommended.Before putting the computer away, be sure to wipe off any moisture.This product and your HealthThis product, like other radio devices, emits radio frequencyelectromagnetic energy. The level of energy emitted by this prod-uct however is far much less than the electromagnetic energyemitted by wireless devices like for example mobile phones.Because this product operates within the guidelines found inradio frequency safety standards and recommendations, we be-lieve this product is safe for use by consumers. These standardsand recommendations reflect the consensus of the scientific com-munity and result from deliberations of panels and committeesof scientists who continually review and interpret the extensiveresearch literature.In some situations or environments, the use of this product maybe restricted by the proprietor of the building or responsible rep-resentatives of the organization. These situations may for ex-ample include:Using this product on board of airplanes, orIn any other environment where the risk of interference to otherdevices or services is perceived or identified as harmful.If you are uncertain of the policy that applies on the use of wire-less devices in a specific organization or environment (e.g. air-ports), you are encouraged to ask for authorization to use thisproduct prior to turning on the product.Regulatory InformationWe are not responsible for any radio or television interferencecaused by unauthorized modification of this product. The cor-rection of interference caused by such unauthorized modifica-tion will be the responsibility of the user. We and its authorizedresellers or distributors are not liable for damage or violation ofgovernment regulations that may arise from failing to complywith these guidelines.Information to the UserImportant Safety Instructions / Importantes Mesures De SécuritéWhen using your telephone equipment, basic safety precau-tions should always be followed to reduce the risk of fire, elec-tric shock and injury to persons, including the following:1.Do not use this product near water, for example, near a bathtub, wash bowl, kitchen sink or laundry tub, in a wet base-ment or near a swimming pool.2.Avoid using a telephone (other than a cordless type) during anelectrical storm. There may be a remote risk of electric shockfrom lightning.3.Do not use the telephone to report a gas leak in the vicinity ofthe leak.4.Use only the power cord and batteries indicated in this manual.Do not dispose of batteries in a fire. They may explode. Checkwith local codes for possible special disposal instructions.SAVE THESE INSTRUCTIONSCertaines mesures de sécurité doivent être prises pendantl’utilisation de matérial téléphonique afin de réduire les risquesd’incendie, de choc électrique et de blessures. En voiciquelquesunes:1.Ne pas utiliser l’appareil près de l’eau, p.ex., près d’unebaignoire, d’un lavabo, d’un évier de cuisine, d’un bac à la-ver, dans un sous-sol humide ou près d’une piscine.2.Éviter d’utiliser le téléphone (sauf s’il s’agit d’un appareil sansfil) pendant un orage électrique. Ceci peut présenter un risquede choc électrique causé par la foudre.3.Ne pas utiliser l’appareil téléphonique pour signaler une fuitede gaz s’il est situé près de la fuite.4.Utiliser seulement le cordon d’alimentation et le type de pilesindiqués dans ce manual. Ne pas jeter les piles dans le feu:elles peuvent exploser. Se conformer aux règlements pertinentsquant à l’élimination des piles.CONSERVER CES INSTRUCTIONSRead Me First

7Getting StartedPrecautions ( Battery Pack )NOTEThe battery pack may become warm during rechargingor normal use. This is completely normal.Recharging will not commence if internal temperature ofthe battery pack is outside of the allowable temperaturerange (0 °C to 50 °C {32°F to 122 °F}) “Bat-tery Power”. Once the allowable range requirement issatisfied, charging begins automatically. Note that therecharging time varies based on the usage conditions. (Re-charging takes longer than usual when the temperature is10 °C {50 °F} or less.)If the temperature is low, the operating time is shortened. Onlyuse the computer within the allowable temperature range.This computer has a high temperature mode function thatprevents the degradation of the battery in high tempera-ture environments. ( “Battery Power”) A levelcorresponding to a 100% charge for high temperature isapproximately equivalent to an 80% charge level for nor-mal temperature mode.The battery pack is a consumable item. If the amount oftime the computer can be run off a particular battery packbecomes dramatically shorter and repeated rechargingsdo not restore its performance, the battery pack should bereplaced with a new one.When transporting a spare battery inside a package,briefcase, etc., it is recommended that it be placed in aplastic bag so that its contacts are protected.Always power off the computer when it is not in use.Leaving the computer on when the AC adaptor is notconnected will exhaust the remaining battery capacity.Care should be exercised with regard to the following inorder to avoid the possibility of overheating, fire or dam-age.Avoid HeatDo not throw the battery pack into a fire orexpose it to excessive heat.Do Not DisassembleDo not insert sharp objects into the battery pack,expose it to bumps or shocks, deform, disas-semble, or modify it.Do Not ShortDo not short the positive (+) and negative (-)contacts.Do Not Put into a MicrowaveDo not put the battery pack into a microwaveoven or a pressurized chamber.Avoid Extreme Heat, Cold and Direct Sun-lightDo not charge, use or leave the battery pack forextended periods where it will be exposed todirect sunlight, in a hot place (in an automobileon a sunny day, for example), or in a cold place.Keep Articles AwayDo not place the battery pack together with ar-ticles such as necklaces or hairpins when carry-ing or storing.If the battery pack will not be used for a long period of time(a month or more), charge or discharge (use) the battery packuntil the remaining battery level becomes 30% to 40% andstore it in a cool, dry place.This computer prevents overcharging of the battery by re-charging only when the remaining power is less than approx.95% of capacity.The battery pack is not charged when the computer is firstpurchased. Be sure to charge it before using it for the firsttime. When the AC adaptor is connected to the computer,charging begins automatically.Should the battery leak and the fluid get into your eyes, do notrub your eyes. Immediately flush your eyes with clear waterand see a doctor for medical treatment as soon as possible.Stop UsingShould the battery emit an abnormal odor, be-come hot to the touch, become discolored,change shape, or become in any way differentfrom normal, remove it from the computer orcharger and stop using it.Do Not Use With Any Other ComputerThe battery pack is rechargeable and was in-tended for the specified computer or charger.Do not use it with a computer other than theone for which it was designed.Do not touch the terminals on the battery pack. The bat-tery pack may no longer function properly if the contactsare dirty or damaged.Do not expose the battery pack to water, or allow it tobecome wet.Lithium Battery!This computer contains a lithium battery to enable the date, time,and other data to be stored. The battery should only be exchangedby authorized service personnel.Warning! A risk of explosion from incorrect installation or mis-application may possibly occur.Lithium BatteryPile au lithium!Le micro-ordinateur renferme une pile au lithium qui permet desauvegarder certaines données comme la date et l’heurenotamment. Elle ne devra être remplacée que par un technicienqualifié.Avertissement! Risque d’explosion en cas de non respect de cettemise en garde!

8Getting StartedNames and Functions of PartsA lithium ion battery that is recyclable powers the product you have purchased. Please call 1-800-8-BATTERY for information on how to recycle this battery.L’appareil que vous vous êtes procuré est alimenté par une batterie au lithium-ion. Pour desrenseignements sur le recyclage de la batterie, veuillez composer le 1-800-8-BATTERY.CAUTIONDo not cover the computer with a thick cloth, such as a blanket.Stylus ( page 21) ( “Wireless LAN”)Wireless LAN AntennaFor information on the key com-binations available. ( “Key Combinations”)LCD ( “Hard Disk Drive”)( “Battery Power”)Keyboard( “LED Indicators”)Caps LockNumeric Key (NumLk)Scroll Lock (ScrLk)Hard disk drive statusBattery pack statusPower status( “Tablet Buttons”)LCD brightness controlInput PanelEnterRotationSecurity( page 20)Touch PadPower SwitchLED Indicators( page 21)Function KeysHard Disk DriveBattery PackTablet ButtonsThe illustrations shown may differ from the actual physical appearances.

9Getting Started( “PC Cards”)( “Modem”)Modem( “LAN”)LAN( “USB Devices”)USB PortsDC IN 16 VDC-IN JackUse this port to a serial mouse or serialcommunication devices.A cable can be connected to prevent theftof your computer. For more informa-tion, read the manual provided with thecable.LOCK( “External Display”)Use only a monaural condenser micro-phone (miniature jack). Using an inputsource other than a monaural condensermicrophone may not allow audio to beinput or may damage the equipment.Microphone JackUse this jack to connect headphones oramplifier-equipped speakers. Audiooutput from the internal speaker is dis-abled when headphones or externalspeakers are connected.Headphone JackSecurity LockSerial PortExternal Display PortThe strap has been designed to carry only the weight of thecomputer. Therefore, be sure that the strap does not carry a weightthat exceeds the weight of the computer. The strap may acci-dentally come loose from the computer.Do not use a strap that is damaged or about to tear.CAUTIONThe hand strap can be attached to any two of the four corners usingscrews (A) which were used to attach the hand strap.Adjust the length of the belt so that the computer does not fall by mis-take, and firmly hold the computer when using it.(The above illustration shows the positionwhere the hand strap is attached at the factory.)The shoulder strap can be connected to thehand strap to make it longer.Hand StrapShoulder StrapCAUTIONDo not connect the mo-dem telephone cableinto the LAN port.PC Card Slots

10Getting StartedTo adjust the volume: Fn + F5 / Fn + F6Speaker on/off : Fn + F4( “Port Replicator”)Speaker( “RAM Module”)RAM Module SlotCAUTIONDo not allow metallic objects or magnetic me-dia to come near the speaker on the bottom sur-face of the computer.• Because the speaker contains a magnet, metalobjects may become attached to the bottomsurface of the computer. This may cause thecomputer to be unstable, or may mark the sur-face of the desk on which it is sitting.• If floppy disks, magnetic memory cards, orother magnetic media approach the speaker,there is a risk that data will be destroyed.The external antenna connector is for use asan extension in the future.CAUTIONFCC RF Exposure Warning:This transmitter must not be co-locatedor operated in conjunction with any otherantenna or transmitter.Optional Port Replicator contains TNCconnector for external mounted antenna.Employed antenna cannot exceed 7 dBiantenna gain and must be professionallyinstalled. Also, must maintain minimum20 cm spacing between external antennaand all person’s body during wirelessmode of operation.Expansion Bus ConnectorExternal Antenna ConnectorsNames and Functions of PartsCAUTIONDo not allow metallic objects or mag-netic media to come near these areas.

11Getting StartedUsing the TetherThe tether can be attached to the bottom right or bottom left corner of the display. It preventsthe stylus (included) from falling accidentally.Attaching the Tether1234TetherCAUTIONWhen closing the display, be careful not to catch the tether between the display andmain part of the computer. (See the figure below.)

12Getting Started1First-time OperationRead the steps below to help you learn what parts are included, and to gain an understanding ofsome basic computer-related operations.1Confirm the inclusion of all parts.Make sure the parts shown in the figure have been supplied. If any of these items aremissing or are not working properly, contact Panasonic Technical Support.3Insert the battery pack.Unlock the cover by sliding the latch to the right.1CAUTIONDo not touch the terminals on the battery pack and the computer. Thebattery pack may no longer function properly if the contacts are dirty ordamaged. Also, the computer may not operate properly.Be sure to insert the battery pack as illustrated.2Slide the latch down, and then without releasing it, open the cover as illustrated.3Slide the battery pack inward until it is firmly in place.2Read the LIMITED USE LICENSE AGREEMENT. ( page 36)Be sure to read the LIMITED USE LICENSE AGREEMENT before breaking theseal on the computer’s packaging.Model No : CF-AA1623AAC adaptor ..........1Model No :CF-VZSU30AC Cord ...............1 Battery Pack........1Modem TelephoneCable ......................1Operating Instructions(This book).................... 1Windows® Book .... 1Product RecoveryCD-ROM ................ 3( “Touchscreen(Advanced)”)Soft Cloth ...............1Confirm that the latch lock is correctly in place. If you carry your computerwithout the latch lock in place, the battery pack may fall out.Before using the battery pack, carefully read “Precautions (Battery Pack)”( page 7).CAUTION4Close the cover until it clicks into place.LatchCover234Stylus .....................1Tether ...................... 1 Shoulder Strap ........1( page 9)( page 11)5Lock the cover by sliding the latch to the left.5

13Getting Started5Open the display.1Pull up on the latch A and release the latch B.2Lift open the display.Slide the power switch and hold it for approximately one second until the power indi-cator turns on before releasing it.CAUTIONConnect your computer to a power outlet.CAUTIONBe sure the AC adaptor is connected until completing the first-time use operation.When using the computer for the first time, do not connect any peripheral de-vice except the battery pack and AC adaptor to the computer.Handling the AC adaptorDo not twist or pull the AC power cord forcefully. Doing so may damage theconnections.Use only the specified AC adaptor with your computer. Using an AC adaptorother than the one supplied might damage the battery and/or the computer.When the DC plug is not connected to the computer, disconnect the AC cordfrom your AC wall outlet.Problems such as sudden voltage drops may arise during periods of thunderand lightning. Since this could adversely affect your computer, an uninterruptiblepower source (UPS) is highly recommended unless the battery pack is installed.46Turn your computer on.Latch ADo not slide the power switch and hold it for more than four seconds; this willcause the power to be turned off forcibly.Do not slide the power switch repeatedly.Once the computer is powered off, you must wait at least ten seconds beforepowering it on again.Setup Windows.Moving the cursor ( ) or clicking buttons can be performed with the touch pad (page 20).Latch B21Power Switch Power Indicator DC-IN JackDC IN 16 V1At [Welcome to the Windows XP Setup Wizard], select [Next].2After reading the agreement, select [I accept this agreement] or [I don’t accept thisagreement], then select [Next].NOTE If [I don’t accept this agreement] is selected, the Windows setup will be aborted.Do not press any keys or touch the touch pad until [Windows XP ProfessionalSetup] is displayed.Do not use the touchscreen during the Windows setup.CAUTION3Select settings for your region, then select [Next].4Enter your name and organization and then select [Next].7

14Getting StartedFirst-time Operation8Calibrate the touchscreen.1Select [start] - [Control Panel] - [Printers and Other Hardware] - [Mouse] -[TouchScreen] - [Calibration].2Touch the “+” mark on the calibration screen with the stylus (included) for aboutone second.3After the calibration procedure is executed (e.g., after the nine “+” marks aretouched), the procedure ends when Enter is pressed.4Select [OK].1Select [start] - [Control Panel] - [User Accounts] - [Create a new account].2Enter a name for the new account, then select [Next].3Select [Computer administrator], then select [Create Account].4<When you want to create a password for the new account>Select the new account you have created and select [Create a password].Follow the instructions on the screen to create a password.5Select [start] - [Turn Off Computer] - [Restart] to restart the computer.CAUTIONRemember this password! If the password is forgotten, Windows cannot be oper-ated. You can create a password reset disk beforehand ( page 16).5Enter your computer name and administrator password and then select [Next].CAUTIONRemember this password! If the password is forgotten, Windows cannot beoperated.6Enter the correct date, time and time zone, then select [Next].The computer will restart.7Enter your administrator password and select .9Create a new account.NOTEIt will take some time before the computer restarts and the screen of step 7 is displayed. Wait, and do not press any keys, or touch the touch pad, etc.

15Getting StartedWhen creating a new user account:• If you make mail settings, create password reset disks ( page 16), or conductother related operations before creating the user account, you will be unable to useany previous mail history or settings.• When you create the first new account, you can only select [Computer administra-tor].Once a “Computer Administrator” account has been created, you can create addi-tional limited user accounts.Note also that only the added user account will be displayed in the Welcome screen.The account for the administrator created during Windows setup will not be dis-played.If the characters or icons on the screen are too small and difficult to see, after complet-ing step 9, select [start] - [All Programs] - [Panasonic], and select [Icon Enlarger]. Thiswill allow you to magnify the display of characters and icons on the screen.The [Icon Enlarger] can be set separately for each account.NOTEThis concludes the first-time use operation guidelines.10Start up Windows Media Player.Log on with the administrator authority, and select on the screen.After this, start up the application following the instructions on the screen.During this process, you will be required to agree to the license agreement. For Win-dows Media Player, it is necessary to agree to the license agreement for each accountcreated.If [I Decline] is selected or a window is closed without any decision being made in thelicense agreement, no icons on the desktop may be selected. In this case, restart thecomputer.After completing the settings, select on the screen, and close the Windows MediaPlayer.If you use the wireless LAN, be sure to refer to the Reference Manual’s “Wireless LAN”.NOTE

16Getting StartedDepending on the Windows settings, installed applications, and drivers, menus andother displays may differ, or some functions (such as use of the password reset disk)may be inoperable. Check with your system administrator for details.You can select Classic view for the Control Panel or select the Classic Start menu.You can also change the way a user logs on or off.The procedure in this manual uses the method or view of the Windows XP defaultsetting (not Classic view or Classic Start menu etc.).Resetting the passwordWindows XP has a function to reset a forgotten password.To use this function, you need to create a password reset disk beforehand followingthe steps below.1Connect the USB floppy disk drive (optional: CF-VFDU03) to your computer.2Select [start] - [Control Panel] - [User Accounts] and select the account you usedto logon.3Select [Prevent a forgotten password] from the [Related Tasks] menu of the ac-count you have logged on to, and create a password reset disk following the on-screen instructions.Store the password reset disk in a safe place.·Only the logon password for each account can be reset.The password set in the Setup Utility cannot be reset. ( “Setup Utility”)Information for Windows XPFirst-time Operation

17Operation1Open the display.Starting Up/Shutting DownStarting Up2Turn your computer on.Slide the power switch and hold it for approximately one second until the powerindicator turns on before releasing it.2CAUTIONWhile booting, avoid the following until the hard disk drive indicator ( )has turned off.• Connecting or disconnecting the AC adaptor.• Touching the power switch or the tablet buttons.• Performing any keyboard, touch pad, touchscreen (or external mouse) op-erations.• Closing the display.Once the computer is powered off, you must wait at least ten seconds beforepowering it on again.When using this computer with the battery pack only, it may take some timefor the power to turn on after sliding the power switch. In this case, slide thepower switch and hold it for more than one second. This phenomenon oc-curs because the standby power is minimized while the power is turned off; itis not a malfunction.When the CPU temperature rises, the computer may not power on to preventthe CPU from overheating. Should this happen, allow the computer to cooldown then switch the power on again.If the computer still does not power on, contact Panasonic Technical Support.Pull up on the latch A and release the latch B.11Lift open the display.2Latch BPower Switch Power Indicator Latch AWhen the power is turned on, sometimes the message “Warming up the sys-tem. Please wait...” (up to 25 minutes) is displayed or the battery indicatoralternately blinks green and orange. This function is designed to preventhard disk drive malfunctions that may occur at low temperatures. Wait forthe computer to start up.NOTE Enter your password*1 and press Enter .( “Security Measures”)Will Start Will Not Start(Power off)If [Enter Password] is displayed,*1Supervisor Password or User Password set in the Setup Utility(not the Windows password).Three incorrect attemptsorNo password for about a minuteThe correct passwordEnter Password [ ]

18OperationStarting Up/Shutting DownThe power saving function is factory set, so if there is no input from a key, the touchpad, the tablet button, the touchscreen or an external mouse (when one is connected)for a certain interval of time, the power to the LCD and hard disk may be turned off.The LCD will resume operation when the touch pad, the touchscreen or an externalmouse (when one is connected) is used or a key or the tablet button is pressed.The power to the LCD may be turned off even when an application software isbeing installed. In this case, because it is conceivable that a selection dialog boxwill be shown, do not press Space or Enter to attempt to resume from thiscondition as doing so may trigger a selection, but instead, press a key unrelated tothe direct triggering of a selection, like Ctrl .In addition, when the computer is left alone, it automatically enters the standby orhibernation mode. The computer will resume by sliding the power switch. ( “Standby/Hibernation Functions”)NOTE3Log on to Windows.After confirming that the hard disk drive indicator ( ) has turned off, select the userand input the password, then select . Until the correct password entered, the com-puter will not operate.4Select your application.You are able to start working on your computer.

19OperationShutting Down (power off your computer)To quickly resume computer operation after shutting down,The standby or hibernation function is available ( “Standby/HibernationFunctions”).When you leave the computer or interrupt your work...If you use the “Standby” or “Hibernation” function, then when you turn on thepower next time, the application software and files you were using before will bedisplayed, and you can restart the same operations immediately ( “Standby/Hibernation Functions”).NOTE1Save important data and close each application.2Select [start] - [Turn Off Computer].3Select [Turn Off].Your computer will power off automatically.Restarting your computer (without shutting down)Select [Restart].To shut down using the keyboard;Press , U , and select [Turn Off] with U .CAUTIONDo not do the following during the shutdown/restart procedure.• Connecting or disconnecting the AC adaptor.• Touching the power switch.• Performing any keyboard, touch pad, touchscreen, tablet buttons, or external mouseoperations.• Closing the display.4Close the display.1Close the display.2Pull up on the latch A.3Position the latch B on the display side, then bring the latch A down to fix thedisplay in place.Latch A213Latch ALatch B

20OperationTouch Pad (Basic Operation)Use the touch pad to move the cursor on the display and perform normal computer operations.For instructions on how to operate, refer to “Touch Pad”.Handling the Touch PadBy design the touch pad is to be used with a finger tip only. Do not place any object on thework surface or press down forcefully with sharp-pointed objects (e.g., nails) or hard ob-jects that can leave marks (e.g., pencils and ball point pen).Try to avoid having any harmful substances such as oil, come in contact with the touch pad.The cursor may not work properly in such cases.When the touch pad becomes dirty:Wipe to remove dirt by using a dry soft cloth such as gauze or a soft cloth first applied withdetergent diluted with water and then thoroughly wrung.Do not use benzene, thinner, or rubbing alcohol. Doing so may adversely affect the surface,e.g., discoloration. In addition, do not use commercially-available household cleaners andcosmetics, as they may contain components harmful to the surface.orTwo quick taps, but onthe second tap leavingyour finger down (apply-ing pressure) and movingit on the work surface.While holding down thebutton, moving your fin-ger on the work surface.orFunction Touch Pad OperationMoving the CursorTapping/ClickingDouble-Tapping/Double-ClickingDraggingorMove the tip of your finger lightlyover the surface.tapping clickingdouble-tappingLeft ButtonRight ButtonWork Surfacedouble-clicking

21OperationTouchscreen (Basic Operation)Your computer is equipped with a touchscreen function allowing you to perform the same opera-tions as the touch pad or mouse by touching the surface of the display with the stylus (included).(The following explanation gives one example (for the default settings).)The operation settings can be changed. For detailed information, refer to “Touchscreen”. Moving the cursor Double-clicking Clicking DraggingCursorHandling the TouchscreenUse the stylus included with the computer. Do not use an implement other than the stylus thatcomes with the computer.Do not place any object on the surface or press down forcefully with sharp-pointed objects(e.g., nails), or hard objects that can leave marks (e.g., pencils and ball point pens).Do not operate the computer when such things as dust are on the screen. Do not allow contactwith substances that could dirty the touchscreen, such as oil.When the touchscreen becomes dirty:Wipe to remove dirt by using a dry soft cloth included with the computer.• Do not use benzene or thinner, or rubbing alcohol.• For more information, refer to “Suggestions About Cleaning the LCD Surface” that comes• with the soft cloth.Handling the StylusClean the stylus tip and screen prior to operation. Foreign particles can scratch the screen andimpede the operation of the stylus.Use the stylus only for the computer screen. Using it for any other purpose may damage thestylus and scratch the screen.StylusOne tapTouch and hold the object (i. e.file or icon), move the stylus onthe surface (dragging the ob-ject to the desired location),then release the stylus.Two quicktapsTo right-click:1Select on the taskbar. changes to .2Select the object you want to right-click.NOTE

22OperationOperating in Tablet ModeUsage ExampleIn Tablet Mode, the computer can be operated while holding the body as shown in the figure.In addition to being used as a regular notebook computer (Laptop mode), this computer canalso be operated in Tablet mode. Simply turn the display around 180°, and close the computerwith the display facing up. In Tablet mode, the computer can be operated using the touch-screen ( page 21), the software keyboard and the tablet buttons ( “Tablet But-tons”), instead of the internal keyboard and the touch pad.Set the computer in Tablet mode using the following procedure.1Open the display so that it is perpendicular with the body of the computer.2Slide the latch C to the right, and then without releasing it, turn the display clockwise by180°.3Close the computer with the display facing up.CAUTIONDo not rotate the display more than 180°, or attempt to rotate the display counter-clockwise.21345Latch ALatch BTo return to Laptop mode:Perform the steps for changing the computer intoTablet mode, only in reverse order.1Pull up on latch A and release the latch B.2Open the display.3Slide the latch C to the right, and then withoutreleasing it, turn the display counter-clockwiseby 180°.NOTE4Pull up on the latch A.5Position the latch B on the display side, then bring the latch A down to fix the display inplace.Latch A22Latch CLatch C

23OperationYou can also start up the software keyboard using the following procedure.Select [start] - [All Programs] - [Panasonic] - [Software Keyboard].When using the touchscreen function, use only the stylus included with the computer.NOTEChanging the Display SettingsTo rotate the displayPress the rotation button until the display is set at the anglethat is most comfortable for you.For detailed information, refer to “Display Rotation”Inputting CharactersPress the input panel button .The software keyboard shown below will appear, and characters can be input with the stylus(included). For detailed information,, refer to “Software Keyboard”.To adjust the brightness of LCDPress the LCD brightness control buttons .You can set the computer so that the display automatically rotates to your preferredangle when changing from Laptop Mode to Tablet Mode or vice versa. ( “Display Rotation”)NOTE StylusTablet ButtonsLCD brightness controlInput PanelEnterRotationSecurity

24OperationIllustrations may be difficult to view depending on the magnification. If the illustration is too small, magnify the display.When the taskbar is hidden at the bottom portion of Acrobat Reader, set the maximum display window size.If a printer is connected, we recommend printing pages. The illustrations and display samples may not print with a highquality.NOTEReference ManualThe Reference Manual and the Important Tips can be accessed on your computer. When a printer is connected, these manuals canalso be printed.The Reference Manual explains functions for you to make greater use of the computer, such as how to add peripheral devices,how the Setup Utility works, and other useful information. (Refer to the cover of this manual for a list of the main contentsincluded.)Important Tips provides information on how to maximize use of the battery pack, which is necessary for computing away fromyour home or office.It also offers helpful explanations on how to use the touchscreen more effectively.Opening the Reference Manual or Important TipsReference ManualSelect [Reference Manual] in [start].Important TipsSelect on the desktop.Important Tips can also be accessed from the following menu.Select [Important Tips] in [start] - [All Programs] - [Panasonic] - [On-Line Manuals]When the Reference Manual or Important Tips is started up for the first time, the License Agreement of the Acrobat Reader may bedisplayed. If it is displayed, after reading the agreement, select [Accept] to access the Reference Manual or Important Tips.Refer to Acrobat Reader Help to use the Acrobat Reader.

25OperationUseful InformationEnvironmentIn use: Temperature: 5 °C to 35 °C {41 °F to 95 °F}Humidity : 30% to 80% RH (No condensation)Not in use: Temperature: -20 °C to 60 °C {-4 °F to 140 °F}Humidity : 30% to 90% RH (No condensation)Usage EnvironmentNOTEOnly use the computer within the allowable temperature range.When the computer is left powered on in a low temperature environment, set [Turn offhard disks] to [Never] in the following menu to avoid damage to the hard disk drive.[start] - [Control Panel] - [Performance and Maintenance] - [Power Options] - [PowerSchemes] Places not to use your computerSuch areas may result in damage to the computer.Areas with electronic equipmentThese areas may interfere with your display or cause your computer to produce strangesounds.Areas with extremely high/low temperaturesDo not leave things near the computer that are sensitive to heat. During operation, thecomputer may become warm.Before putting the computer away, be sure to wipe off any moisture.HandlingThis computer has been designed so as to minimize shock to the LCD and hard disk drive, theleakage of liquid (e.g., water) on to the keyboard, etc., but no warranty is provided againstsuch trouble. Therefore, as a precision instrument, be extremely careful in the handling.Do not drop or hit your computer against solid objects.Do not carry your computer when it is on.Remove all external devices and cables, and PC Cards sticking out of the computer (see thefigure on the left) before transporting the computer.We recommend preparing a fully charged battery.When transporting spare batteries inside a package, briefcase, etc., it is recommended that itbe placed in a plastic bag so that its contacts are protected.Do not place the computer upright or allow it to tip over. When the computer receives extremelystrong shock after falling, the hard disk or floppy disk drive, etc., may become inoperable.Do not carry the computer while the display is open, or carry it by gripping the display.Do not put anything (e.g., a piece of paper) between the display and keyboard.Always carry your computer with you. Never check it in with luggage. For use of the com-puter inside an aircraft, we recommend asking the airlines regarding their policy on this issue.It is a good idea to make backup copies on disks and carry them with you.

26OperationTouch Pad page 20MaintenanceAreas excluding the displayWipe these areas with a soft cloth, after applying water or detergent diluted with water to thesoft cloth and firmly wringing out excess water.DisplayUse the Soft Cloth included with the computer. (For more information, refer to “SuggestionsAbout Cleaning the LCD Surface” that comes with the Soft Cloth.)If the Protective Film becomes dirty or damaged, it may be time to replace your ProtectiveFilm. The Protective Film is a disposable item. To find out the model number of your Protec-tive Film, contact Panasonic Technical Support. (For more information, refer to the “Operat-ing Instructions” that come with the Protective Film.)Do not use benzene, thinner, or rubbing alcohol. Doing so may adversely affect thesurface, e.g., discoloration. In addition, do not use commercially-available householdcleaners and cosmetics, as they may contain components harmful to the surface.Do not directly add or spray water or detergent. If liquid enters the inside of the com-puter, it may cause it to work improperly or be damaged.CAUTIONDo not touch the screen before you re-attach a Protective Film, as you may leave a markor a scratch on the screen.CAUTIONSaving Data on the Hard DiskDo not expose your computer to shock.Use care when handling your computer, shock may damage your hard disk or make yoursoftware applications and data unusable.Do not power down your computer while software applications are running or harddisk drive indicator ( ) is on.Properly shut Windows down to avoid problems.Save all valuable data to disks.Backing up data to disks will limit damage should trouble occur to your computer or shouldyou inadvertently change or erase data.Use the security function for all important data. ( “Security Measures”)Hard Disk LockWhen the Hard Disk Lock is set to [Enable], it is impossible to read/write data from/to thehard disk when the hard disk is installed in a different computer, since a password is also setfor the hard disk. When the hard disk is returned to the original computer, you can read/writedata as before. In this case, however, make the settings in the Setup Utility exactly the sameas they were before the hard disk was removed. (Note that this Hard Disk Lock does notguarantee the complete protection of data.) ( “Security Measures”)Users are advised to purchase the latest versions of virus protection software and usethem regularly.We recommend you run the software:• When booting your computer.• After receiving data.We recommend that you check data received on disks or from external sources, such as datadownloaded from the Internet, e-mail, etc. (For compressed files, uncompress them beforerunning a check).Computer VirusesUseful Information

27OperationWhen Using Peripheral DevicesPay strict attention to the following points to avoid damage to the computer, peripheral de-vices, cables, etc. Also, in addition to following this manual and the Reference Manual, care-fully read the instruction manuals for the peripheral devices being used.Use only peripheral devices that conform to the computer’s specifications.Connect the devices properly, paying close attention to the condition and position of theconnectors.If a connection cannot be made easily, do not apply undue force; check once more to con-firm the condition and position of the connector (alignment of pins, etc.) .If the connector has holding screws, fasten the screws firmly.Do not carry the computer with cables attached, and do not pull on the cables forcefully.To prevent theft of data or unauthorized access to the hard diskvia a wireless LAN.If you plan to use wireless LAN functions, we recommend that you do so only after makingthe appropriate security settings, such as for data encryption.Wireless LANWhen Disposing of or Transferring Ownership of This DeviceWhen disposing of or transferring ownership of this device, erase all data on the hard disk inorder to prevent the theft of hard disk data. Even if you delete data or initialize the hard diskthrough normal Windows commands, data can still be read using special software. In order toerase all data, either have the data erased by a specialist (at a charge) or use the hard disk dataerase utility (included) ( page 42). (Note that this hard disk data erase utility does notguarantee that data will be completely erased.)Also, note that if you transfer ownership of this device without deleting commercial soft-ware that you have installed to the hard disk, you may be in violation of the licensingagreement for that software.When Changing Hard Disk PartitionsWhen using the hard disk backup function ( page 38), do not divide up the hard disk beforecreating a backup region. If you do this, the backup region cannot be created. Divide into thepartition when the backup region is created.Windows UpdateYou can use the latest patches and service packs for Windows with the following menus.Do not apply “Driver Updates” even if a message to update a driver appears. If a driverupdate is required, contact to Panasonic Technical Support.[start] - [All programs] - [Windows Update]

28TroublesahootingList of Error CodesWhen turning on the computer, if one of the following error codes or messages is displayed, follow the instructions shown below.If the problem persists, or if the error code or message displayed is not shown here, contact Panasonic Technical Support.Error Code/Message0211: Keyboard error0251: System CMOS checksumbad - Default configurationused0271: Check date and time set-tings0280: Previous boot incomplete- Default configuration used0613: Serial Port*1 configura-tion changed0614: Serial Port*1 config. error- device disabled*1The port name, such as A or B, isdisplayed, indicating the conflict-ing ports.Press <F1> to resume, <F2> toSetupOperating System not foundActionIf an external keyboard or mouse is connected, disconnect these devices.An error has occurred in the memory that stores the Setup Utility settings. This error occurswhen the memory content is changed through some inadvertent operation by a program orother function.Run the Setup Utility and load the default values, then change the settings to the appro-priate values as needed.If the problem persists, the internal clock battery may need to be replaced. Contact Pana-sonic Technical Support.The data and time setting are incorrect.Run the Setup Utility and set the date and time correctly.If the problem persists, the internal clock battery may need to be replaced. Contact Pana-sonic Technical Support.Startup has failed repeatedly, so the Setup Utility settings have been returned to their defaultvalues, and the computer has been restarted. Run the Setup Utility and load the default values, then change the settings to the appropri-ate values as needed.I/O address and IRQ settings are in conflict.Run the Setup Utility and change the settings in [Advanced] menu so there is no portconflicts.Write down the error details and press F2 to run the Setup Utility. Confirm thesettings, and change the settings to the appropriate values as needed.The OS is not properly installed on the floppy disk or the hard disk that you are trying toboot from.If the computer cannot be booted from the floppy disk, check the floppy disk drive toensure that the disk is in fact bootable, and change it to another if not.If the computer cannot be booted from the hard disk, confirm whether the hard disk isproperly recognized in [Information] menu of the Setup Utility.If the hard disk is recognized, perform the reinstallation procedure. If not, contact Pana-sonic Technical Support.If a device is connected to the USB port, disconnect the device, or run the Setup Utilityand set [Legacy USB Support] in [Advanced] menu to [Disable]. To run the Setup Utility1Restart the computer.2Press F2 while [Panasonic] boot screen is displayed soon after the computer begins the startup procedure.

29TroubleshootingDealing with Problems (Summary)The power indicator or bat-tery indicator is not litThe computer does not op-erate when a USB device isconnected[Enter Password] is dis-playedPOST Startup Error(s) isdisplayedWindows startup, or an op-eration is extremely slowThe date and time are incor-rectWhen resuming from thestandby or hibernationmode, [Enter Password]does not appear even if apassword has been set in theSetup UtilityWhen the administratorpassword is forgottenWhen “Remove disks orother media. Press any keyto restart” (or a similar mes-sage) is displayedCheck the cable connection for the AC adaptor.Check to see if a fully charged battery is properly installed.Remove the battery pack and disconnect the AC adaptor, then connect them again.The computer may not operate when certain USB devices are connected. Disconnect theUSB device, or set [Legacy USB Support] to [Disable] in [Advanced] menu of the SetupUtility.Input your Supervisor Password or User Password. If you have forgotten it, contact Pa-nasonic Technical Support. page 28Press F9 in the Setup Utility ( “Setup Utility”). This will restore the SetupUtility’s settings to their default values (except the password settings). Then, the SetupUtility must be run once again for you to input the appropriate operating environmentsettings. (The processing speed depends on the application software used, so this opera-tion may not cause the processing speed to increase.)Disable any resident software.You can set the date and time using the following menu.[start] - [Control Panel] - [Date, Time, Language, and Regional Options] - [Date and Time] When the computer is connected to a LAN, confirm the date and time of the server. When the computer is connected to a LAN, confirm the date and time of the server.If you continue to experience problems, the internal battery maintaining the clock mayneed to be replaced. Contact Panasonic Technical Support. This computer will not correctly recognize the date and time starting from the year 2100 A.D. Even when a password has been set in the Setup Utility, [Enter Password] does not appearwhen the computer resumes from the standby or hibernation mode.If you want to use the security function when using the standby or hibernation mode, use theWindows password as follows:1Select the account to change in [start] - [Control Panel] - [User Accounts] and set thepassword.2Add the check mark for [Prompt for password when computer resumes from standby]in [Control Panel] - [Performance and Maintenance] - [Power Options] - [Advanced].Set the password again in the following procedure.If you have created a password reset disk ( page 16), a message is displayed whenyou fail to correctly enter the password. Follow the message’s instructions and set thepassword again by using the password reset disk.If you have not created a password reset disk, after reinstalling, setup Windows and thenset the password again.This means a floppy disk that does not contain system startup information has been left inthe floppy disk drive. Remove the floppy disk, and press any key.This message may appear when certain USB devices are connected. Remove the USBdevice, or set [Legacy USB Support] in [Advanced] menu of the Setup Utility to [Disable].If the message still appears even after trying the above two measures, this may be anindication that some type of hard disk failure has occurred. Contact Panasonic TechnicalSupport.When a problem occurs, refer to this page. The “Reference Manual” also contains detailed information. If a problem appears to berelated to a software application, read the software related manual. If you still cannot troubleshoot the problem, contact PanasonicTechnical Support. You can use the PC Information Viewer to check the computer’s usage status. ( “Dealing withProblems (Advanced)”) Starting Up

30TroublesahootingNo display after powering onThe power has not beenturned off, but after a cer-tain period of time, there isno displayWhen the battery pack isused, the screen is darkerthan when the AC adaptoris connectedAn afterimage appears (e.g.,green, red, and blue dotsremain on the display) orthere are dots not display-ing the correct colorsThe external display nolonger displays properlyWhen you want to displaythe fonts or icons at a largersizeWhen there is no display to an external display,• Check your cable connection to the external display.• Confirm your display is powered on.• Check the settings for your external display.The display destination may be set to the external display.Try changing the display destination by pressing Fn + F3 .If you want to switch the display destination repeatedly by pressing Fn + F3 , makesure that the display destination has switched completely each time before pressing Fn + F3 again.Press Fn + F2 and adjust the brightness.Has the computer been set to the power-saving mode? To resume operation of your computer from the condition the power of the display is off(for energy conservation purposes), press any key unrelated to the direct triggering of aselection, like Ctrl .To save power, your computer may have automatically entered the standby mode (powerindicator blinks green) or hibernation mode (power indicator turns off). In such cases,slide the power switch.Press Fn + F2 and adjust the brightness. Note, however, that when the brightness isincreased, the battery running time will become shorter.Brightness can be set to separate levels for when the AC adaptor is connected and whenit is disconnected.If an image is displayed for a prolonged period of time, an afterimage may appear. Thisis not a malfunction. The afterimage will disappear when a different screen is displayed.High-precision and advanced technologies are necessary in the production of color liquidcrystal displays (color LCDs). Therefore, if 0.002% or less of the picture elements eitherfail to light or remain constantly lit (that is, more than 99.998% of elements are function-ing properly), no defect is considered to exist.When an external display not compatible with the power saving mode is used with thecomputer, the display may not function correctly when the computer enters the powersaving mode. In such cases, turn off the power to the external display.Change the size of the icons, etc. using “Icon Enlarger” ( “Icon Enlarger”). DisplayPress F9 in the Setup Utility ( “Setup Utility”). This will restore the SetupUtility’s settings to their default values (except the password settings).Try removing all peripheral devices.Check a disk error using the following procedure.1Select [Local Disk(C:)] with the right button in [start] - [My Computer], and select[Properties].2Select [Tools] - [Check Now].3Select [Start] after selecting required items in [Check disk options].At startup, hold down F8 when the [Panasonic] boot screen disappears*1, and releaseyour finger when the Windows Advanced Options Menu is displayed. Start the computerin Safe Mode, and confirm the details of the error.*1When [Password on boot] is set to [Enable], [Enter Password] appears after the [Panasonic] bootscreen disappears. Hold down F8 soon after inputting the password and pressing Enter . Starting Up (continued)When the previous item isnot the causeDealing with Problems (Summary)

31TroubleshootingThe red indicator lightsThe red indicator blinksThe orange indicator blinksThe green indicator blinksThe battery indicator blinksgreen and orange alternatelyThe battery level is very low (the charge is approx. 9% or less).Connect the AC adaptor. You can use the computer when the battery indicator light isorange. If you do not have an AC adaptor, save your data and power off your computer.After replacing the battery pack with a fully charged one, turn your computer on.Quickly save your data and power off your computer. Remove the battery pack and dis-connect the AC adaptor, then connect them again.If the problem persists, contact Panasonic Technical Support. Possible failure in thebattery pack or charging circuit.Battery cannot be recharged temporarily because the internal temperature of the batterypack is outside of the acceptable temperature range for recharging. Once the allowablerange requirement is satisfied, charging begins automatically. Your computer can beused normally in this state.In high temperature mode, the battery is discharging to the level that corresponds to an80%*1 charge for normal temperature mode. ( “Battery Power”) Do not re-move the battery pack while the battery indicator is blinking green or the power will beturned off forcibly.*1 In high temperature mode, the level that corresponds to an 80% charge for normal temperaturemode is displayed as [100%].Warming up the system to prevent hard disk drive malfunctions at low temperature. Leaveyour computer as is. Once the allowable temperature range requirement is satisfied, yourcomputer will start automatically. Battery Indicator Display (continued)During simultaneous dis-play, one of the screens be-comes disorderedWhen an a moving picturesuch as an MPEG file is be-ing played with MediaPlayer, the display destina-tion cannot be switched us-ing Fn + F3Try changing the display by pressing Fn + F3 .If you continue to experience problems, try changing the display destination in the fol-lowing menu.[start] - [Control Panel] - [Other Control Panel Options] - [Intel(R) Extreme Graphics 2M] - [Devices]When the [Command Prompt] is set to “Full Screen” by pressing Alt + Enter , thepicture is displayed on one of the screens only. When the window display is restored bypressing Alt + Enter , the picture is displayed on both screens.The display destination cannot be switched while a moving picture such as an MPEG fileis playing. Stop playing the moving picture before switching the display destination.Windows cannot be shutdown or restarted Shutting downIf a USB device is connected, try removing it.

$32TroublesahootingDealing with Problems (Summary)The display cannot be ro-tated and the operation ofthe touch pad and the touch-screen do not match the dis-play angleThe display is not rotatedautomatically by switchingfrom Laptop mode to Tab-let mode, or vice versaWhen the screensaver startswhile the display is rotated,nothing is displayed on thescreen Display RotationWhen some applications are running, the display may not be rotated and the operation ofthe touch pad and the touchscreen may not match the display angle. Press the rotationbutton 1 - 3 times (until the operation of the touch pad and the touchscreen matchesthe display angle). After exiting the application, rotate the display, then start up theapplication again.If the problem persists, restart the computer.Confirm that the default angle of each mode is correctly set. ( “Display Rotation”)Do not switch from Laptop mode to Tablet mode, or vice versa, while Windows is in theprocess of switching users with the Fast User Switching function.Some screensaver types do not display anything on the screen for the first minute or so.Try changing the screensaver type. Touch Pad / TouchscreenIf you are using an external mouse, ensure that the external mouse has been connectedcorrectly.Restart the computer by using the keyboard (Press , U , and select [Restart] with R ).Be sure to use the Display Rotation Tool to rotate the display.If the computer does not respond to keyboard commands, read “No response”( page 33).When the Microsoft® IntelliMouse™ Wheel mode or the original mode is set for thetouch pad, only scroll operations are possible for the right part or bottom part of the touchpad. In this case, cursor operations are possible by using the work surface excluding theright part or bottom part. When no mode is set, the entire surface of the touch pad can beused for cursor operations.Has the Setup Utility been used to set [Touch Pad] to [Enable]?When external mouse drivers are installed (e.g., Intellimouse), the touch pad may not beused.Has the touch pad driver been properly installed?As a result of the physical characteristics of the touchscreen, sometimes the position ofthe stylus does not match the position of the cursor on the screen. This is not a malfunc-tion. Perform [Calibration] ( page 14).Has the Setup Utility been used to set [Touchscreen] to [Enable]?When mouse drivers are installed (i.e. IntelliMouse), the touchscreen is unable to beused.Has the touchscreen driver been properly installed?The cursor cannot be con-trolled properlyThe cursor does not move inscrolling area of the touchpadUnable to input using thetouch padUnable to point correctlywith the stylus includedwith the computerUnable to input by touchingthe displayIs Acrobat Reader installed?If Acrobat Reader is not installed, run [c:\util\reader\acroreader51_enu_full.exe] in [start]- [Run] to reinstall the program. When installing the program, do not change the instal-lation destination folder. If the destination folder is changed, the Reference Manual can-not be opened from the [start] menu. Reference ManualThe Reference Manual isnot displayed$