Panasonic of North America 9TGCF-187 Panasonic Notebook PC w/ Intel WLAN User Manual Operating Instructions

Panasonic Corporation of North America Panasonic Notebook PC w/ Intel WLAN Operating Instructions

Users Manual

OperationStarting Up/Shutting Down ............................ 15Touch Pad (Basic Operation) ............................. 19Touchscreen (Basic Operation) .......................... 20Operating in Tablet Mode .............................. 21Reference Manual ......................................... 23OPERATING INSTRUCTIONSPersonal ComputerAppendixLIMITED USE LICENSE AGREEMENT ........ 32Hard Disk Data Erase Utility .......................... 34Names and Functions of Parts ...................... 35Specifications ................................................ 39LIMITED WARRANTY ................................... 41TroubleshootingList of Error Codes ......................................... 24Dealing with Problems (Summary) ................... 25Reinstalling Software .................................... 30Getting StartedRead Me First.................................................. 3First-time Operation ........................................ 9Contents[Additional Manual]Reference ManualThis manual can be accessed on your computer. Referto page 23 on how to access the Reference Manual.Reference Manual•Read Me First•Key CombinationsReference Manual•Tablet Buttons•Touch Pad (Advanced)•Touchscreen (Advanced)•Software keyboard•Panasonic Hand Writing•Display Rotation•Standby/HibernationFunctions•Security Measures•Computing on the Road•Battery Power•PC Cards•RAM Module•Port Replicator•External Display•USB Devices•Modem•LAN•Wireless LAN•Hard Disk Drive•Setup Utility•LED IndicatorsReference Manual•Technical Information•DMI Viewer•List of Error Codes•Dealing with Problems(Advanced)Appendix Getting StartedOperationTroubleshootingModel No. CF-18 Series2000 XPPlease read these instructions carefully before using this product and save this manual for future use.
2Getting StartedIntroductionThank you for purchasing the Panasonic computer. Read the operating instructions thoroughly for proper operation of your newcomputer.Illustrations and Terminology in this ManualCopyrightThis manual is copyrighted by Matsushita Electric Industrial Co., Ltd. with all rights reserved. No part of this manual may bereproduced in any form without the prior written permission of Matsushita Electric Industrial Co., Ltd.No patent liability is assumed with respect to the use of the information contained herein.©2003 Matsushita Electric Industrial Co., Ltd. All Rights Reserved.DisclaimerComputer specifications and manuals are subject to change without notice. Matsushita Electric Industrial Co., Ltd. assumes noliability for damage incurred directly or indirectly from errors, omissions or discrepancies between the computer and the manuals.TrademarksMicrosoft® and Windows® are registered trademarks of Microsoft Corporation of the United States and/or other countries.Intel, Pentium, PROSet and SpeedStep™ are either registered trademarks or trademarks of Intel Corporation.Adobe® and Acrobat® are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/orother countries.Panasonic is a registered trademark of Matsushita Electric Industrial Co., Ltd.Names of products, brands, etc., appearing in this manual are trademarks or registered trademarks of their respective owner companies.NOTE:NOTE provides a useful fact or helpful information.CAUTION:CAUTION indicates a condition that may result in minor or moderate injury.WARNING:WARNING indicates a hazard that may result in moderate or serious injury.Windows 2000 : Information for Microsoft® Windows® 2000 Professional users. “Windows” or “Windows 2000”in this manual.Windows XP : Information for Microsoft® Windows® XP Professional users. “Windows” or “Windows XP” inthis manual.Enter : This illustration means to press the [Enter] key.Fn + F5 : This illustration means to press and hold the [Fn] key, then press the [F5] key.[Start]-[Run]:This illustration means to click [Start], then to click [Run].(For some applications, you may need to double-click.) :Where to go for referred information. : This illustration means to refer to the Reference Manual, which is available on your computer.Refer to page 23 on how to access this manual.Windows 2000 screens are used in this manual when no specific OS (operating system) notes are required.Some of the illustrations in this manual may differ slightly in shape from the actual items in order to make the explana-tion easier to understand.In this manual, descriptions are given using illustrations not featuring the hand strap for convenience of explanation.If the user has logged on without administrator authority, some functions may not be executable, and some screens may benot displayed as shown in this manual. If this happens, log on with Administrator authority to enable these functions.Confirm the latest information on optional products in catalogs, etc.*For the Model No., insert the 12 digit number (for example, CF-18BHAZXDM) located onthe bottom of the computer.Customer's RecordSerial No.orDate of PurchaseModel No.*Code No.Dealer's NameDealer's Address
3Getting StartedRead Me FirstFederal Communications Commission RadioFrequency Interference StatementNote: This equipment has been tested and found to comply withthe limits for a Class B digital device, pursuant to Part 15 of theFCC Rules. These limits are designed to provide reasonableprotection against harmful interference in a residentialinstallation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used inaccordance with the instructions, may cause harmful interferenceto radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If thisequipment does cause harmful interference to radio or televisionreception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interferenceby one or more of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit differentfrom that to which the receiver is connected.Consult the Panasonic Service Center or an experienced ra-dio/TV technician for help.WarningTo assure continued compliance, use only shielded interfacecables when connecting to a computer or peripheral. Also, anychanges or modifications not expressly approved by the partyresponsible for compliance could void the user’s authority tooperate this equipment.FCC RF Exposure Warning:This computer is provided with PC Card slots that could beused with wireless transmitter(s), which will be specifically rec-ommended, when they become available. Other third-party wire-less transmitter(s) have not been RF exposure evaluated for usewith this computer and may not comply with FCC RF exposurerequirements.This equipment complies with FCC radiation exposure limitsset forth for an uncontrolled environment.This equipment must be installed and operated in accordancewith provided instructions and minimum 2.5 cm spacing mustbe provided between antenna and all person’s body (excludingextremities of hands, wrist and feet) during wireless modes ofoperation.This transmitter must not be co-located or operated in conjunc-tion with any other antenna or transmitter.This device complies with Part 15 of the FCC Rules. Operationis subject to the following two conditions:(1) This device may not cause harmful interference, and(2) This device must accept any interference received, includinginterference that may cause undesired operation.Responsible Party: Matsushita Electric Corporation of AmericaOne Panasonic WaySecaucus, NJ 07094Tel No:1-800-LAPTOP-5 (1-800-527-8675)For U.S.A.1. This equipment complies with CFR47 Part 68 rules. On thecomputer is a label that contains, among other information,the FCC registration number and ringer equivalence number(REN) for this equipment. If required, this information mustbe provided to the telephone company.2. An FCC compliant telephone cord and modular plug is pro-vided with this equipment. This equipment is designed to beconnected to the telephone network or premises wiring us-ing a compatible modular jack which is Part 68 compliant.See Installation Instructions for details.3. The REN is used to determine the quantity of devices whichmay be connected to the telephone line. Excessive RENs onthe telephone line may result in the devices not ringing in re-sponse to an incoming call. In most, but not all area, the sumof RENs should not exceed five (5.0). To be certain of thenumber of devices that may be connected to a line, as deter-mined by the total RENs, contact the local telephone com-pany.4. If your telephone equipment cause harm to the telephone net-work, the telephone company will notify you in advice thattemporary discontinuance of service may be required. But ifadvice notice isn’t practical, the telephone company will no-tify the customer as soon as possible. Also, you will be ad-vised of your right to file a complaint with the FCC if youbelieve it is necessary.5. The telephone company may take changes in it’s facilities,equipment, operations or procedures that could affect the op-eration of the equipment. If this happens the telephone com-pany will provide advance notice in order for you to makenecessary modifications to maintain uninterrupted service.6. If trouble is experienced with this equipment, for repair orwarranty information, please contact Matsushita ElectricCorporation of America at DIAL TOLL FREE 1-800-LAP-TOP5 (1-800-527-8675). If the equipment is causing harmto the telephone network, the telephone company may re-quest that you disconnect the equipment until the problem isresolved.7.There are no user serviceable parts contained in this equipment.8. This equipment may not be used on coin service provided bythe telephone company. Connection to party lines is subjectto state tariffs.9. The Telephone Consumer Protection Act of 1991 makes itunlawful for any person to use a computer or other electronicdevice to send any message via a telephone fax machine un-less such message clearly contains in a margin at the top orbottom of each transmitted page or on the first page of thetransmission, the date and time it is sent and an identificationof the business or other entry, or other individual sending themessage and the telephone number of the sending machineor such business, other entity, or individual. In order to pro-gram this information into your fax software, you should re-fer to the manual of the Fax software being used.FCC Regulation Notice for modemThis equipment contains a FCC approved modem.Manufacturer of modem: AMBIT Microsystems CorporationModel No. T60M283.** (** = numbers or alphabet letters)FOR HOME OR OFFICE USETested To ComplyWith FCC Standards
4Getting StartedRead Me FirstFor CanadaIndustry Canada (IC) Notice for modemThis equipment contains an Industry Canada approved modem unit.The Industry Canada label is affixed on the modem unit.EQUIPMENT ATTACHMENT LIMITATIONS“NOTICE: The Industry Canada label identifies certifiedequipment. This certification means that the equipment meetstelecommunications network protective, operational andsafety requirements as prescribed in the appropriate TerminalEquipment Technical Requirements document(s). TheDepartment does not guarantee the equipment will operateto the user’s satisfaction.Before installing this equipment, users should ensure that itis permissible to be connected to the facilities of the localtelecommunications company. The equipment must also beinstalled using an acceptable method of connection. Thecustomer should be aware that compliance with the aboveconditions may not prevent degradation of service in somesituations.Repairs to certified equipment should be coordinated by arepresentative designated by the supplier. Any repairs oralterations made by the user to this equipment, or equipmentmalfunctions, may give the telecommunications companycause to request the user to disconnect the equipment.Users should ensure for their own protection that theelectrical ground connections of the power utility, telephonelines and internal metallic water pipe system, if present, areconnected together. This precaution may be particularlyimportant in rural areas. Caution: Users should not attemptto make such connections themselves, but should contactthe appropriate electric inspection authority, or electrician,as appropriate.”“NOTICE: The Ringer Equivalence Number (REN) assignedto each terminal device provides an indication of themaximum number of terminals allowed to be connected to atelephone interface. The termination on an interface mayconsist of any combination of devices subject only to therequirement that the sum of the Ringer Equivalence Numbersof all the devices does not exceed 5.”REN: See bottom of the computerRESTRICTIONS CONCERNANT LE RACCORDEMENTDE MATÉRIEL“AVIS: L’étiquette d’Industrie Canada identifie le matérielhomologué. Cette étiquette certifie que le matériel estconforme aux normes de protection, d’exploitation et desécurité des réseaux de télécommunications, comme leprescrivent les documents concernant les exigencestechniques relatives au matériel terminal. Le Ministèren’assure toutefois pas que le matériel fonctionnera à lasatisfaction de l’utilisateur.Avant d’installer ce matériel, l’utilisateur doit s’assurer qu’ilest permis de le raccorder aux installations de l’entrepriselocale de télécommunication. Le matériel doit également êtreinstallé en suivant une méthode acceptée de raccordement.L’abonné ne doit pas oublier qu’il est possible que laconformité aux conditions énoncées ci-dessus n’empêchepas la dégradation du service dans certaines situations.Les réparations de matériel homologué doivent êtrecoordonnées par un représentant désigné par le fournisseur.L’entreprise de télécommunications peut demander àl’utilisateur de débrancher un appareil à la suite deréparations ou de modifications effectuées par l’utilisateurou à cause de mauvais fonctionnement.Pour sa propre protection, l’utilisateur doit s’assurer que tousles fils de mise à la terre de la source d’énergie électrique,des lignes téléphoniques et des canalisations d’eaumétalliques, s’il y en a, sont raccordés ensemble. Cetteprécaution est particulièrement importante dans les régionsrurales. Avertissement: L’utilisateur ne doit pas tenter de faireces raccordements lui-même; il doit avoir recours à un serviced’inspection des installations électriques, ou à un électricien,selon le cas.”“AVIS: L’indice d’équivalence de la sonnerie (IES) assignéà chaque dispositif terminal indique le nombre maximal determinaux qui peuvent être raccordés à une interface. Laterminaison d’une interface téléphonique peut consister enune combinaison de quelques dispositifs, à la seule conditionque la somme d’indices d’équivalence de la sonnerie de toutsles dispositifs n’excède pas 5.”IES: Voir sous le fond de l’ordinateur10.According to the FCC’s electrical safety advisory, we recom-mend that you may install an AC surge arrestor in the AC out-let to which this equipment is connected. Telephone compa-nies report that electrical surges, typically lightning transients,are very destructive to customer terminal equipment connectedto AC power sources and that this is a major nationwide prob-lem.“Caution: To reduce the risk of fire, use only No.26 AWG or larger telecom-munication line cord.”“ATTENTION: Pour réduire le risque d’incendie, utiliser uniquement desconducteurs de télécommunications 26 AWG ou de section supérieure.”Notice for the products using LCDThis product uses one or more fluorescent lamps containing asmall amount of mercury. It also contains lead in some compo-nents. Disposal of these materials may be regulated in your com-munity due to environmental considerations. For disposal orrecycling information please contact your local authorities, orthe Electronics Industries Alliance: <http://www.eiae.org/>Industry CanadaThis product complies with RSS210 Industry Canada.Operation is subject to the following two conditions;(1) this device may not cause interference, and(2) this device must accept any interference, including interfer-ence that may cause undesired operation of the device.
5Getting StartedAvoid Magnetic FieldsKeep the computer away from magnets.Data stored on the hard disk may be lost.Keep Small Objects AwayDo not insert paper clips or other small objectsinto the computer.Do Not Disassemble the ComputerDo not attempt to disassemble your computer.Avoid Excessive Force on the DisplayDo not apply excessive downward force on thedisplay when it is completely opened, especiallywhen plugs and/or cables are connected to therear of the computer.Avoid low-temperature burnsAvoid more than casual contact with any heatproducing area of the notebook computer, poweradaptor, and any option or accessory you use withit. Even low heat, if warmer than body tempera-ture, can cause a burn, if the skin is exposed tothe heat source for a long enough period of time.Avoid Radio Frequency InterferenceDo not place the computer near a television orradio receiver.PrecautionsThe CF-18 was developed based on thorough research into thereal-world portable computing environments. Exhaustive pur-suit of usability and reliability under harsh conditions led to in-novations such has the magnesium alloy exterior, vibrationdamped hard disk drive and floppy disk drive, flexible internalconnections. The CF-18’s outstanding engineering has beentested using the stiff MIL-STD- 810F (for vibration and shock)and IP (for dust and water) based procedures.As with any portable computer device precautions should betaken to avoid any damage. The following usage and handlingprocedures are recommended.Before putting the computer away, be sure to wipe off any moisture.This product and your HealthThis product, like other radio devices, emits radio frequencyelectromagnetic energy. The level of energy emitted by this prod-uct however is far much less than the electromagnetic energyemitted by wireless devices like for example mobile phones.Because this product operates within the guidelines found inradio frequency safety standards and recommendations, we be-lieve this product is safe for use by consumers. These standardsand recommendations reflect the consensus of the scientific com-munity and result from deliberations of panels and committeesof scientists who continually review and interpret the extensiveresearch literature.In some situations or environments, the use of this product maybe restricted by the proprietor of the building or responsible rep-resentatives of the organization. These situations may for ex-ample include:Using this product on board of airplanes, orIn any other environment where the risk of interference to otherdevices or services is perceived or identified as harmful.If you are uncertain of the policy that applies on the use of wire-less devices in a specific organization or environment (e.g. air-ports), you are encouraged to ask for authorization to use thisproduct prior to turning on the product.Regulatory InformationWe are not responsible for any radio or television interferencecaused by unauthorized modification of this product. The cor-rection of interference caused by such unauthorized modifica-tion will be the responsibility of the user. We and its authorizedresellers or distributors are not liable for damage or violation ofgovernment regulations that may arise from failing to complywith these guidelines.Information to the UserImportant Safety Instructions / Importantes Mesures De SécuritéWhen using your telephone equipment, basic safety precau-tions should always be followed to reduce the risk of fire, elec-tric shock and injury to persons, including the following:1.Do not use this product near water, for example, near a bathtub, wash bowl, kitchen sink or laundry tub, in a wet base-ment or near a swimming pool.2.Avoid using a telephone (other than a cordless type) during anelectrical storm. There may be a remote risk of electric shockfrom lightning.3.Do not use the telephone to report a gas leak in the vicinity ofthe leak.4.Use only the power cord and batteries indicated in this manual.Do not dispose of batteries in a fire. They may explode. Checkwith local codes for possible special disposal instructions.SAVE THESE INSTRUCTIONSCertaines mesures de sécurité doivent être prises pendantl’utilisation de matérial téléphonique afin de réduire les risquesd’incendie, de choc électrique et de blessures. En voiciquelquesunes:1.Ne pas utiliser l’appareil près de l’eau, p.ex., près d’unebaignoire, d’un lavabo, d’un évier de cuisine, d’un bac à la-ver, dans un sous-sol humide ou près d’une piscine.2.Éviter d’utiliser le téléphone (sauf s’il s’agit d’un appareil sansfil) pendant un orage électrique. Ceci peut présenter un risquede choc électrique causé par la foudre.3.Ne pas utiliser l’appareil téléphonique pour signaler une fuitede gaz s’il est situé près de la fuite.4.Utiliser seulement le cordon d’alimentation et le type de pilesindiqués dans ce manual. Ne pas jeter les piles dans le feu:elles peuvent exploser. Se conformer aux règlements pertinentsquant à l’élimination des piles.CONSERVER CES INSTRUCTIONS
6Getting StartedPrecautions ( Battery Pack )NOTEThe battery pack may become warm during recharging ornormal use. This is completely normal.Recharging will not commence if internal temperature ofthe battery pack is outside of the allowable temperaturerange (0 °C to 50 °C {32°F to 122 °F}) “Bat-tery Power”. Once the allowable range requirement issatisfied, charging begins automatically. Note that therecharging time varies based on the usage conditions. (Re-charging takes longer than usual when the temperature is10 °C {50 °F} or less.)If the temperature is low, the operating time is shortened. Onlyuse the computer within the allowable temperature range.This computer has a high temperature mode function thatprevents the degradation of the battery in high temperatureenvironments. ( “Battery Power”) If the hightemperature mode is enabled in the Setup Utility ( “Setup Utility”), a level of 100% in the [High Tem-perature] mode is about a level of 80% in the [NormalTemperature] mode.The battery pack is a consumable item. If the amount oftime the computer can be run off a particular battery packbecomes dramatically shorter and repeated rechargingsdo not restore its performance, the battery pack should bereplaced with a new one.When transporting a spare battery inside a package,briefcase, etc., it is recommended that it be placed in aplastic bag so that its contacts are protected.Always power off the computer when it is not in use.Leaving the computer on when the AC adaptor is notconnected will exhaust the remaining battery capacity.Care should be exercised with regard to the following inorder to avoid the possibility of overheating, fire or dam-age.Avoid HeatDo not throw the battery pack into a fire orexpose it to excessive heat.Do Not DisassembleDo not insert sharp objects into the battery pack,expose it to bumps or shocks, deform, disas-semble, or modify it.Do Not ShortDo not short the positive (+) and negative (-)contacts.Do Not Put into a MicrowaveDo not put the battery pack into a microwaveoven or a pressurized chamber.Avoid Extreme Heat, Cold and Direct Sun-lightDo not charge, use or leave the battery pack forextended periods where it will be exposed todirect sunlight, in a hot place (in car on a sunnyday, for example), or in a cold place.Keep Articles AwayDo not place the battery pack together with ar-ticles such as necklaces or hairpins when carry-ing or storing.If the battery pack will not be used for a long period of time(a month or more), charge or discharge (use) the battery packuntil the remaining battery level becomes 30% to 40% andstore it in a cool, dry place.This computer prevents overcharging of the battery by re-charging only when the remaining power is less than approx.95% of capacity.The battery pack is not charged when the computer is firstpurchased. Be sure to charge it before using it for the firsttime. When the AC adaptor is connected to the computer,charging begins automatically.Should the battery leak and the fluid get into your eyes, do notrub your eyes. Immediately flush your eyes with clear waterand see a doctor for medical treatment as soon as possible.Stop UsingShould the battery emit an abnormal odor, be-come hot to the touch, become discolored,change shape, or become in any way differentfrom normal, remove it from the computer orcharger and stop using it.Do Not Use With Any Other ComputerThe battery pack is rechargeable and was in-tended for the specified computer or charger.Do not use it with a computer other than theone for which it was designed.Do not touch the terminals on the battery pack. The bat-tery pack may no longer function properly if the contactsare dirty or damaged.Do not expose the battery pack to water, or allow it tobecome wet.Read Me FirstLithium Battery!This computer contains a lithium battery to enable the date, time,and other data to be stored. The battery should only be exchangedby authorized service personnel.Warning! A risk of explosion from incorrect installation or mis-application may possibly occur.Lithium BatteryPile au lithium!Le micro-ordinateur renferme une pile au lithium qui permet desauvegarder certaines données comme la date et l’heurenotamment. Elle ne devra être remplacée que par un technicienqualifié.Avertissement! Risque d’explosion en cas de non respect de cettemise en garde!
7Getting StartedUsers are advised to purchase the latest versions of virus protection software and use them regularly.Computer VirusesWe recommend you run the software:• When booting your computer.• After receiving data.We recommend that you check data received on disks or from external sources, such as data down-loaded from the Internet, e-mail, etc. (For compressed files, uncompress them before running a check).Saving Data on the Hard DiskDo not expose your computer to shock.Use care when handling your computer, shock may damage your hard disk or make your software appli-cations and data unusable.Do not power down your computer while software applications are running or hard disk driveindicator ( ) is on.Properly shut Windows down to avoid problems.Save all valuable data to disks.Backing up data to disks will limit damage should trouble occur to your computer or should you inad-vertently change or erase data.Use the security function for all important data. ( “Security Measures”)Hard Disk LockWhen the Hard Disk Lock is set to [Enable], it is impossible to read/write data from/to the hard disk when thehard disk is installed in a different computer, since a password is also set for the hard disk. When the hard diskis returned to the original computer, you can read/write data as before. In this case, however, make the settingsin the Setup Utility exactly the same as they were before the hard disk was removed. (Note that this Hard DiskLock does not guarantee the complete protection of data.) ( “Security Measures”)When Disposing of or Transferring Ownership of This DeviceWhen disposing of or transferring ownership of this device, completely erase all data on the hard disk inorder to prevent the theft of hard disk data. Even if you delete data or initialize the hard disk through normalWindows commands, data can still be read using special software. In order to erase all data, either have thedata erased by a specialist (at a charge) or use the hard disk data erase utility (included) ( page 34).(Note that this hard disk data erase utility does not guarantee that data will be completely erased.)Also note that transferring ownership of this device without deleting software from the hard disk mayviolate software user’s licenses.When Using Peripheral DevicesPay strict attention to the following points to avoid damage to the computer, peripheral devices, cables, etc.Also, in addition to following this manual and the Reference Manual, carefully read the operating instruc-tions for the peripheral devices being used.Use only peripheral devices that conform to the computer’s specifications.Connect the devices properly, paying close attention to the condition and position of the connectors.If a connection cannot be made easily, do not apply undue force; check once more to confirm the condi-tion and position of the connector (alignment of pins, etc.) .If the connector has holding screws, fasten the screws firmly.Do not carry the computer with cables attached, and do not pull on the cables forcefully.EnvironmentIn use: Temperature: 5 °C to 35 °C {41 °F to 95 °F}Humidity: 30% to 80% RH (No condensation)Not in use: Temperature: -20 °C to 60 °C {-4 °F to 140 °F}Humidity: 30% to 90% RH (No condensation)Usage Environment(To next page)
8Getting StartedTouch Pad page 19Read Me FirstSuch areas may result in damage to the computer.Areas with electronic equipmentThese areas may interfere with your display or cause your computer to produce strange sounds.Areas with extremely high/low temperaturesDo not leave things near the computer that are sensitive to heat. During operation, thecomputer may become warm. Places not to use your computerHandlingThis computer has been designed so as to minimize shock to the LCD and hard disk drive, etc.,but no warranty is provided against such trouble. Therefore, as a precision instrument, beextremely careful in the handling.Do not drop or hit your computer against solid objects.Do not carry your computer when it is on.Remove all external devices and cables, and PC Cards sticking out of the computer (see thefigure on the left) before transporting the computer.We recommend preparing a fully charged battery.When transporting spare batteries inside a package, briefcase, etc., it is recommended that itbe placed in a plastic bag so that its contacts are protected.Do not place the computer upright or allow it to tip over. When the computer receives extremelystrong shock after falling, the hard disk or floppy disk drive, etc., may become inoperable.Do not carry the computer while the display is open, or carry it by gripping the display.Do not put anything (e.g., a piece of paper) between the display and keyboard.Always carry your computer with you. Never check it in with luggage. For use of the com-puter inside an aircraft, we recommend asking the airlines regarding their policy on this issue.It is a good idea to make backup copies on disks and carry them with you.MaintenanceAreas excluding the displayWipe these areas with a soft cloth, after applying water or detergent diluted with water to thesoft cloth and firmly wringing out excess water.DisplayUse the Soft Cloth included with the computer. (For more information, refer to “SuggestionsAbout Cleaning the LCD Surface” that comes with the Soft Cloth.)If the Protective Film becomes dirty or damaged, it may be time to replace your ProtectiveFilm. The Protective Film is a disposable item. To find out the model number of your Protec-tive Film, contact Panasonic Technical Support. (For more information, refer to the “Operat-ing Instructions” that come with the Protective Film.)Do not use benzene, thinner, or rubbing alcohol. Doing so may adversely affect the surface, e.g., discoloration.In addition, do not use commercially-available household cleaners and cosmetics, as they may contain compo-nents harmful to the surface.Do not directly add or spray water or detergent. If liquid enters the inside of the computer, it may cause it towork improperly or be damaged.CAUTIONDo not touch the screen before you re-attach a Protective Film, as you may leave a mark ora scratch on the screen.CAUTIONNOTEOnly use the computer within the allowable temperature range.When the computer is left powered on in a low temperature environment, set [Turn offhard disks] to [Never] in the following menu to avoid damage to the hard disk drive.Windows 2000[Start] - [Settings] - [Control Panel] - [Power Options] - [Power Schemes]Windows XP[Start] - [Control Panel] - [Performance and Maintenance] - [Power Options] - [Power Schemes]
9Getting Started1First-time OperationRead the steps below to help you learn what parts are included, and to gain an understanding ofsome basic computer-related operations.1Confirm the inclusion of all parts.Make sure the parts shown in the figure have been supplied. If any of these items aremissing or are not working properly, contact Panasonic Technical Support.3Insert the battery pack.Unlock the cover by sliding the latch to the right.1CAUTIONDo not touch the terminals on the battery pack and the computer. Thebattery pack may no longer function properly if the contacts are dirty ordamaged. Also, the computer may not operate properly.Be sure to insert the battery pack as illustrated.2Slide the latch down, and then without releasing it, open the cover as illustrated.3Slide the battery pack inward until it is firmly in place.2Read the LIMITED USE LICENSE AGREEMENT. ( page 32)Before removing the seal covering the power switch, read the LIMITED USE LICENSEAGREEMENT.Model No : CF-AA1623AAC adaptor ..........1Model No :CF-VZSU30AC Cord ...............1 Battery Pack........1Modem TelephoneCable ......................1Operating Instructions(This book).................... 1Windows® Book .... 1Product Recovery CD-ROMWindows 2000.........2Windows XP............3( “Touchscreen(Advanced)”)Soft Cloth ...............1Confirm that the latch lock is correctly in place. If you carry your computerwithout the latch lock in place, the battery pack may fall out.Before using the battery pack, carefully read “Precautions (Battery Pack)”( page 6).CAUTION4Close the cover, then lock it by sliding the latch to the left.LatchCover234Stylus .....................1Tether ......................1 Shoulder Strap........1( page 36)( page 38)
10Getting StartedFirst-time Operation5Open the display.1Pull up on the latch A and release the latch B.2Lift open the display.Slide the power switch and hold it for approximately one second until the power indi-cator turns on before releasing it.CAUTIONConnect your computer to a power outlet.CAUTIONBe sure the AC adaptor is connected until completing the first-time use operation.When using the computer for the first time, do not connect any peripheral de-vice except the battery pack and AC adaptor to the computer.Handling the AC adaptorDo not twist or pull the AC power cord forcefully. Doing so may damage theconnections.Use only the specified AC adaptor with your computer. Using an AC adaptorother than the one supplied might damage the battery and/or the computer.When the DC plug is not connected to the computer, disconnect the AC cordfrom your AC wall outlet.Problems such as sudden voltage drops may arise during periods of thunderand lightning. Since this could adversely affect your computer, an uninterruptiblepower source (UPS) is highly recommended unless running from the batterypack alone.46Turn your computer on.Latch ADo not slide the power switch and hold it for more than four seconds; this willcause the power to be turned off forcibly.Do not slide the power switch repeatedly.Once the computer is powered off, you must wait at least ten seconds beforepowering it on again.7Setup Windows.Moving the cursor ( ) or clicking buttons can be performed with the touch pad (page 19).1At [Welcome to the Windows 2000 Setup Wizard], select [Next].2After reading the agreement, select [I accept this agreement] or [I don’t acceptthis agreement], then select [Next].Windows 2000Do not press any keys or touch the touch pad until [Windows 2000 Profes-sional Setup] is displayed.Do not use the touchscreen during the Windows setup.CAUTIONNOTEIf [I don’t accept this agreement] is selected, the Windows setup will be aborted.Latch B21Power Switch Power Indicator DC-IN JackDC IN 16.0 V
11Getting StartedCAUTION3Select settings for your region, then select [Next].4Enter your name and organization and then select [Next].5Enter your computer name and administrator password and then select [Next].Remember this password! If the password is forgotten, Windows cannot beoperated.6Enter the correct date, time and time zone, then select [Next].7At [Networking Settings], select [Typical settings], then select [Next].8At [Workgroup or Computer Domain], select [No, this computer is not on a net-work, or is on a network without a domain], then select [Next].The computer will restart.9At [Welcome to the Network Identification Wizard], select [Next].10At [Users of This Computer], select [Users must enter a user name and passwordto use this computer], then select [Next].11Select [Finish].12Enter your administrator password and select [OK].1At [Welcome to the Windows XP Setup Wizard], select [Next].2After reading the agreement, select [I accept this agreement] or [I don’t accept thisagreement], then select [Next].Windows XPNOTE If [I don’t accept this agreement] is selected, the Windows setup will be aborted.Do not press any keys or touch the touch pad until [Windows XP ProfessionalSetup] is displayed.Do not use the touchscreen during the Windows setup.CAUTION3Select settings for your region, then select [Next].4Enter your name and organization and then select [Next].5Enter your computer name and administrator password and then select [Next].CAUTIONRemember this password! If the password is forgotten, Windows cannot beoperated.6Enter the correct date, time and time zone, then select [Next].7At [Networking Settings], select [Typical settings], then select [Next].8At [Workgroup or Computer Domain], select [No, this computer is not on a net-work, or is on a network without a domain], then select [Next].The computer will restart.NOTEIt may take two to three minutes until the next screen is displayed. Wait, anddo not press any keys, or touch the touch pad, etc.
12Getting StartedFirst-time OperationNOTEIf [Windows XP is currently configured to manage the Intel(R) PRO/WirelessLAN adaptor.] is displayed, select [Yes].8Calibrate the touchscreen.1Select [Start] - [Settings] - [Control Panel] - [Mouse] - [TouchScreen] - [Calibration].2Touch the “+” mark on the calibration screen with the stylus (included) for about one second.3After the calibration procedure is executed (e.g., after the nine “+” marks aretouched), the procedure ends when Enter is pressed.4Select [OK].Windows 20001Select [Start] - [Control Panel] - [Printers and Other Hardware] - [Mouse] -[TouchScreen] - [Calibration].2Touch the “+” mark on the calibration screen with the stylus (included) for about one second.3After the calibration procedure is executed (e.g., after the nine “+” marks aretouched), the procedure ends when Enter is pressed.4Select [OK].Windows XP9Enter your administrator password and select .9Windows XPCreate a new account.1Select [Start] - [Control Panel] - [User Accounts] - [Create a new account].2Enter a name for the new account, then select [Next].3Select [Computer administrator], then select [Create Account].4<When you want to create a password for the new account>Select the new account you have created and select [Create a password].Follow the instructions on the screen to create a password.5Select [Start] - [Turn Off Computer] - [Restart] to restart the computer.CAUTIONRemember this password! If the password is forgotten, Windows cannot be operated.You can create a password reset disk beforehand ( page 14).If “Yes, make this computer a member of the following domain” is selected,the following message may be displayed: [An invalid domain was specified.Would you like to proceed for now and try joining a domain later?]. In thiscase, select [Yes]. After selecting [Yes], the computer will restart automati-cally, but sometimes the [Starting Windows] message will remain on the screen,and windows will not start up. If this happens, hold Tab down whilepressing Alt until [Network Identification Wizard] is displayed on top, andfollow the instructions on the screen.NOTE
13Getting StartedCAUTIONStore the floppy disks in a safe place. They will enable you to return yourcomputer to the condition at the time of purchase should any problems occur.When creating backup disks, do not run any other application program.When creating backup disks and the message [Insufficient files to copy] isdisplayed, select [OK] and then contact Panasonic Technical Support.While the floppy disk drive indicator is on, do not remove the floppy disk,power off the computer or use the standby or hibernation function ( “Standby/Hibernation Functions”).Be sure to create the backup disk.If a backup disk is not created, it will be impossible to return the computer toits original state. In this case, contact Panasonic Technical Support.Create BACKUP Disks for Reinstallation1Connect the USB floppy disk drive to your computer.2Prepare 2HD floppy disks and make sure they arenot in the write-protected state, and then set it.3Windows 2000Select [Start] - [Programs] - [Panasonic] - [CreateBackup Disk] and follow the on-screen instruc-tions.Windows XPSelect [Start] - [All Programs] - [Panasonic] - [Cre-ate Backup Disk] and follow the on-screen instruc-tions.4Place a label identifying the contents on each disk.Name of created backup diskFIRSTAID FD (When the display for creating the UPDATE FD is shown, createthe disk by following the on-screen instructions.)This concludes the first-time use operation guidelines.To create backup disks, the USB floppy disk drive (optional: CF-VFDU03) and format-ted 2HD floppy disks are needed.Label on the top sur-face, and insert theshutter-side headfirst.USBFloppyThe floppy disk drive must be the A drive.NOTEWhen creating a new user account:• If you make mail settings, create password reset disks ( page 14), or conductother related operations before creating the user account, you will be unable to useany previous mail history or settings.• When you create the first new account, you can only select [Computer administra-tor].Once a “Computer Administrator” account has been created, you can create addi-tional limited user accounts.Note also that only the added user account will be displayed in the Welcome screen.The account for the administrator created during Windows setup will not be dis-played.If you use the wireless LAN, be sure to refer to the Reference Manual’s “WirelessLAN”.NOTE
14Getting StartedDepending on the Windows settings, installed applications, and drivers, menus andother displays may differ, or some functions (such as use of the password reset disk)may be inoperable.You can select Classic view for the Control Panel or select the Classic Start menu.You can also change the way a user logs on or off.The procedure in this manual uses the method of the Windows XP default setting(not Classic Start menu etc.).Resetting the passwordWindows XP has a function to reset a forgotten password.To use this function, you need to create a password reset disk beforehand followingthe steps below.1Connect the USB floppy disk drive (optional: CF-VFDU03) to your computer.2Select [Start] - [Control Panel] - [User Accounts] and select the account you usedto logon.3Select [Prevent a forgotten password] from the [Related Tasks] menu of the ac-count you have logged on to and create a password reset disk following the on-screen instructions.Store the password reset disk in a safe place.·Only the logon password for each account can be reset.The password set in the Setup Utility cannot be reset.Information for Windows XPFirst-time Operation
15OperationOperation1Open the display.Starting Up/Shutting DownStarting Up2Turn your computer on.Slide the power switch and hold it for approximately one second until the powerindicator turns on before releasing it.2CAUTIONWhile booting, avoid the following until the hard disk drive indicator ( )has turned off.• Connecting or disconnecting the AC adaptor.• Touching the power switch or the tablet buttons.• Performing any keyboard, touch pad, touchscreen (or external mouse) op-erations.• Closing the display.Once the computer is powered off, you must wait at least ten seconds beforepowering it on again.When using this computer with the battery pack only, it may take some timefor the power to turn on after sliding the power switch. In this case, slide thepower switch and hold it for more than one second. This phenomenon oc-curs because the standby power is minimized while the power is turned off; itis not a malfunction.When the CPU temperature rises, the computer may not power on to preventthe CPU from overheating. Should this happen, allow the computer to cooldown then switch the power on again.If the computer still does not power on, contact Panasonic Technical Support.Pull up on the latch A and release the latch B.11Lift open the display.2When the power is turned on, sometimes the message “Warming up the system” isdisplayed or the battery indicator alternately blinks green and orange, and start-uptakes longer than usual (a few minutes or more). This function is designed to preventhard disk drive malfunctions that may occur at low temperatures. Wait for the com-puter to start up.NOTELatch BPower Switch Power indicator Latch A
16OperationStarting Up/Shutting Down3Log on to Windows.Windows 2000After confirming that the hard disk drive indicator ( ) has turned off, input the username and password, then select [OK]. Until the correct user name and password areentered, the computer will not operate.Windows XPAfter confirming that the hard disk drive indicator ( ) has turned off, select the userand input the password, then select . Until the correct password entered the com-puter will not operate.The power saving function is factory set, so if there is no input from a key, the touchpad, the tablet button, the touchscreen or an external mouse (when one is connected)for a certain interval of time, the power to the LCD and hard disk may be turned off.The LCD will resume operation when the touch pad, the touchscreen or an externalmouse (when one is connected) is used or a key or the tablet button is pressed.The power to the LCD may be turned off even when an application software is beinginstalled. In this case, because it is conceivable that a selection dialog box will beshown, do not press Space or Enter to attempt to resume from this conditionas doing so may trigger a selection, but instead, press a key unrelated to the directtriggering of a selection, like Ctrl .In addition, when the computer is left alone, it automatically enters the standby orhibernation mode ( “Standby/Hibernation Functions”). The computerwill resume by sliding the power switch.Windows XPWhen switching to a different user with the Fast User Switching function, it may notbe possible to set the settings of the display. In this case, log on with the administra-tor authority again, not using the Fast User Switching function, and try the operationonce more.NOTEWhen an application or file that was previously displayed ap-pears on your screen,the standby or hibernation mode has been set. ( “Standby/Hibernation Func-tions”) Enter your password*1 and press Enter .( “Security Measures”)Will Start Will Not Start(Power off)If [Enter Password] is displayed,*1Supervisor Password or User Password set in the Setup Utility(not the Windows password).*2Even if no password is entered for about a minute when startingup the Setup Utility, the power will not be turned off.Three incorrect attemptsorNo password for about a minute*2The correct passwordEnter Password [ ]4Select your application.You are able to start working on your computer.
17OperationOperationShutting Down (power off your computer)Restarting your computer (without shutting down)Windows 2000Select [Restart], then select [OK].Windows XPSelect [Restart].To shut down using the keyboard,Windows 2000Press , U , and select [Shut down] with , then press Enter .Windows XPPress , U , and select [Turn Off] with , then press Enter .To quickly resume computer operation after shutting down,The standby or hibernation function is available. ( “Standby/Hiberna-tion Functions”)NOTEThis procedure is for shutting down the computer without using the standby or hibernationfunction ( “Standby/Hibernation Functions”).1Save important data and close each application.2Windows 2000Select [Start] - [Shut Down].Windows XPSelect [Start] - [Turn Off Computer].3Windows 2000Select [Shut down], then select [OK].Windows XPSelect [Turn Off].Your computer will power off automatically.CAUTIONDo not do the following during the shutdown/restart procedure.• Connecting or disconnecting the AC adaptor.• Touching the power switch or the tablet buttons.• Performing any keyboard, touch pad, touchscreen (or external mouse) opera-tions.• Closing the display.(To next page)
18OperationStarting Up/Shutting Down4Close the display.1Close the display.2Pull up on the latch A.3Position the latch B on the display side, then bring the latch A down to fix thedisplay in place.Latch A213Latch ALatch B
19OperationOperationTouch Pad (Basic Operation)Use the touch pad to move the cursor on the display and perform normal computer operations.For instructions on how to operate, “Touch Pad (Advanced)”.Handling the Touch PadIf a key combination such as Fn + F5 is used while the pad is being touched, thefunction of the key combination may not work. In addition, it is possible that control of thecursor will be lost and the cursor will not show proper movements. In such cases, thecomputer has to be restarted by using the keyboard (e.g., ).The touch pad is designed to be used with a fingertip only. Therefore, avoid the followingactions, which may cause damage to the work surface.• Placing any object on the work surface• Pressing down forcefully with sharp-pointed objects (e.g., nails) or hard objects that canleave marks (e.g., pencils and ball point pens)Try to avoid having any harmful substances such as oil, come in contact with the touch pad.The cursor may not work properly in such cases.When the touch pad becomes dirty:Wipe to remove dirt by using a dry soft cloth such as gauze or a soft cloth first applied withdetergent diluted with water and then thoroughly wrung.Do not use benzene, thinner, or rubbing alcohol. Doing so may adversely affect the surface,e.g., discoloration. In addition, do not use commercially-available household cleaners andcosmetics, as they may contain components harmful to the surface.orTwo quick taps, but onthe second tap leavingyour finger down (apply-ing pressure) and movingit on the work surface.While holding down thebutton, moving your fin-ger on the work surface.orFunction OperationMoving the CursorTapping/ClickingDouble-Tapping/Double-ClickingDraggingorMove the tip of your finger lightlyover the surface.tapping clickingdouble-tappingLeft ButtonRight ButtonWork Surfacedouble-clicking
20OperationTouchscreen (Basic Operation)Your computer is equipped with a touchscreen function allowing you to perform the same opera-tions as the touch pad or mouse by touching the surface of the display with the stylus (included).(The following explanation gives one example (for the default settings).)The operation settings can be changed. For detailed information, “Touchscreen(Advanced)”. Moving the cursor Double-clicking Clicking DraggingCursorHandling the TouchscreenUse the stylus included with the computer. Do not use an implement other than the stylus thatcomes with the computer.Do not place any object on the surface or press down forcefully with sharp-pointed objects(e.g., nails), or hard objects that can leave marks (e.g., pencils and ball point pens).Do not operate the computer when such things as dust are on the screen. Do not allow contactwith substances that could dirty the touchscreen, such as oil.When the touchscreen becomes dirty:Wipe to remove dirt by using a dry soft cloth included with the computer.Do not use benzene or thinner, or rubbing alcohol.For more information, refer to “Suggestions About Cleaning the LCD Surface” that comeswith the soft cloth.Handling the StylusClean the stylus tip and screen prior to operation. Foreign particles can scratch the screen andimpede the operation of the stylus.Use the stylus only for the computer screen. Using it for any other purpose may damage thestylus and scratch the screen.Do not use pencils, implements with sharp tips or hard objects for screen operations. Thescreen may be damaged as a result.StylusOne tapTouch and hold the object (i. e.file or icon), move the stylus onthe surface (dragging the ob-ject to the desired location),then release the stylus.Two quicktapsTo right-click:1Select on the taskbar. changes to .2Select the object you want to right-click.NOTE
21OperationOperationOperating in Tablet ModeUsage ExampleIn Tablet Mode, the computer can be operated while holding the body as shown in the figure.In addition to being used as a regular notebook computer (Laptop mode), this computer canalso be operated in Tablet mode. Simply turn the display around 180°, and close the computerwith the display facing up. In Tablet mode, the computer can be operated using the touch-screen ( page 20), the software keyboard and the tablet buttons ( “Tablet But-tons”), instead of the internal keyboard and the touch pad.Set the computer in Tablet mode using the following procedure.1Open the display so that it is perpendicular with the body of the computer.2Slide the latch C to the right, and then without releasing it, turn the display clockwise by180°.3Close the computer with the display facing up.CAUTIONDo not rotate the display more than 180°, or attempt to rotate the display counter-clockwise.21345Latch ALatch BTo return to Laptop mode:Perform the steps for changing the computer intoTablet mode, only in reverse order.1Pull up on latch A and release the latch B.2Open the display.3Slide the latch C to the right, and then withoutreleasing it, turn the display counter-clockwiseby 180°.NOTE4Pull up on the latch A.5Position the latch B on the display side, then bring the latch A down to fix the display inplace.Latch A22Latch CLatch C
22OperationYou can also start up the software keyboard using the following procedure.Windows 2000Select [Start] - [Programs] - [Panasonic] - [Software Keyboard].Windows XPSelect [Start] - [All Programs] - [Panasonic] - [Software Keyboard].When using the touchscreen function, use only the stylus included with the computer.NOTEChanging the Display SettingsTo rotate the displayPress the rotation button until the display is set at the anglethat is most comfortable for you.For detailed information, “Display Rotation”Inputting CharactersPress the input panel button .The software keyboard shown below will appear, and characters can be input with the stylus(included). For detailed information, “Software Keyboard”.To adjust the brightness of LCDPress the LCD brightness control buttons .You can set the computer so that the display automatically rotates to your preferredangle when changing from Laptop Mode to Tablet Mode or vice versa. ( “Display Rotation”)NOTE StylusTablet ButtonsLCD brightness controlInput PanelEnterRotationSecurityOperating in Tablet Mode
23OperationOperationIllustrations may be difficult to view depending on the magnification. If this is the case, we recommend that the display bemagnified.The characters in PDF files (such as the Reference Manual) may be difficult to read depending on the Acrobat Readersettings and the Windows Desktop settings. In such cases, change the Acrobat Reader settings with the following procedure.1Start up Acrobat Reader.2Select [Edit] - [Preferences] - [Accessibility], and then set [Color Scheme] to [Use colors specified in document].When the taskbar is hidden at the bottom portion of Acrobat Reader, set the maximum display window size.If a printer is connected, we recommend printing pages. The illustrations and display samples may not print with a highquality.NOTEReference ManualThe Reference Manual and the Important Tips can be accessed on your computer. When a printer is connected, these manuals canalso be printed.The Reference Manual explains functions for you to make greater use of the computer, such as how to add peripheral devices,how the Setup Utility works, and other useful information. (Refer to the cover of this manual for a list of the main contentsincluded.)Important Tips provides information on how to maximize use of the battery pack, which is necessary for computing away fromyour home or office.It also offers helpful explanations on how to use the touchscreen more effectively.Opening the Reference Manual or Important TipsReference ManualWindows 2000Select [Reference Manual] in [Start] - [Programs] - [Panasonic] - [On-Line Manuals].Windows XPSelect [Reference Manual] in [Start].Important TipsSelect on the desktop.Important Tips can also be accessed from the following menu.Windows 2000Select [Important Tips] in [Start] - [Programs] - [Panasonic] - [On-Line Manuals]Windows XPSelect [Important Tips] in [Start] - [All Programs] - [Panasonic] - [On-Line Manuals]When the Reference Manual or Important Tips is started up for the first time, the License Agreement of the Acrobat Reader may bedisplayed. If it is displayed, after reading the agreement, select [Accept] to access the Reference Manual or Important Tips.Refer to Acrobat Reader Help to use the Acrobat Reader.
24TroubleshootingList of Error CodesThe following is a list of the messages that BIOS can display. Most of them occur during POST. Some of them displayinformation about a hardware device, e.g., the amount of memory installed. Others may indicate a problem with a device,such as the way it has been configured. Following the list are explanations of the messages and remedies for reportedproblems.If your system displays any of the below error messages other that the ones marked with an asterisk (*), write down themessage and contact Panasonic Technical Support. If your system fails after you make changes in the Setup menus, reset thecomputer, enter Setup and install Setup defaults or correct the error.0200 Failure Fixed DiskFixed disk in not working or not configured properly. Check to see if fixed disk is attached properly. Run Setup.Find out if the fixed-disk type is correctly identified.0211 Keyboard errorKeyboard not working.0212 Keyboard Controller FailedKeyboard controller failed test. May require replacing keyboard controller.0213 Keyboard locked - Unlock key switchUnlock the system to proceed.0230 System RAM Failed at offset : nnnnSystem RAM failed at offset nnnn of in the 64k block at which the error was detected.0231 Shadow RAM Failed at offset : nnnnShadow RAM failed at offset nnnn of the 64k block at which the error was detected.0232 Extended RAM Failed at offset : nnnnExtended RAM Failed at address line : nnnnExtended memory not working or not configured properly at offset or address line nnnn.0250 System battery is dead - Replace and run SETUPThe CMOS clock battery indicator shows the battery is dead. Replace the battery and run Setup to reconfigure the system.*0251 System CMOS checksum bad - Default configuration usedSystem CMOS has been corrupted or modified incorrectly, perhaps by an application program that changes data stored in CMOS. TheBIOS installed Default SETUP Values. If you do not want these values, enter Setup and enter your own values. If the error persists, checkthe system battery or contact Panasonic Technical Support.0260 System timer errorThe timer test failed. Requires repair of system board.0270 Real time clock errorReal-time clock fails BIOS test. May require board repair.0271 Check date and time settingsReal-time clock is illegal. Run Setup and set the date and clock.*0280 Previous boot incomplete - Default configuration usedPrevious POST did not complete successfully. POST loads default values and offers to run Setup. If the failure was caused by incorrectvalues and they are not corrected, the next boot will likely fail. On systems with control of wait states, improper Setup settings can alsoterminate POST and cause this error on the next boot. Run Setup and verify that the wait-state configuration is correct. This error is clearedthe next time the system is booted.02D0 System cache error - Cache disabledContact your Panasonic Technical Support.Failing Bits : nnnnThe hex number nnnn is a map of the bits at the RAM address which failed the memory test. Each 1 (one) in the map indicates a failed bit.See error 230,231 or 232 for offset address of the failure in System, Extended or Shadow memory.Operating System not foundOperating system cannot be located on either drive A: or drive C:. Enter Setup and see if fixed disk and drive A: are properly identified.Press <F1> to resume, <F2> to SetupDisplayed after any recoverable error message. Press <F1> to start the boot process or <F2> to enter a Setup and change the settings. Writedown and follow the information shown on the screen.0614 Serial Port A config. error - device disabled0616 Serial Port B config. error - device disabledSerial Device I/O Address or IRQ are in conflict. Change the I/O Address or IRQ in the Setup Utility.
25TroubleshootingDealing with Problems (Summary)The power indicator or bat-tery indicator is not litThe computer does not op-erate when a USB device isconnected[Enter Password] is dis-playedPOST Startup Error(s) isdisplayedWindows startup, or an op-eration is extremely slowThe date and time are incor-rectWhen resuming from thestandby or hibernationmode, [Enter Password]does not appear even if apassword has been set in theSetup UtilityWhen “Invalid system disk.Replace the disk, and thenpress any key.” (or a simi-lar message) is displayedWhen the administratorpassword is forgottenCheck the cable connection for the AC adaptor.Check to see if a fully charged battery is properly installed.Remove the battery pack and disconnect the AC adaptor, then connect them again.The computer may not operate when certain USB devices are connected. Disconnect theUSB device, or set [Legacy USB support] to [Disable] in [Advanced] menu of the SetupUtility.Input your password. If you have forgotten it, contact Panasonic Technical Support. page 24Press F9 in the Setup Utility ( “Setup Utility”). This will restore the SetupUtility’s settings to their default values (except the password settings). Then, the SetupUtility must be run once again for you to input the appropriate operating environment set-tings. (The processing speed depends on the application software used, so this operationmay not cause the processing speed to increase.)You can set the date and time using the following menu.Windows 2000[Control Panel] - [Date/Time]Windows XP[Control Panel] - [Date, Time, Language, and Regional Options] - [Date and Time] When the computer is connected to a LAN, confirm the date and time of the server.If you continue to experience problems, the internal battery maintaining the clock mayneed to be replaced. Contact Panasonic Technical Support. When the computer is connected to a LAN, confirm the date and time of the server. This computer will not correctly recognize the date and time starting from the year 2100 A.D.Even when a password has been set in the Setup Utility, [Enter Password] does not appear whenthe computer resumes from the standby or hibernation mode. If you want to use the securityfunction when using the standby or hibernation mode, use the Windows password as follows:Windows 2000Set the password in [Control Panel] - [Users and Passwords], then add the check mark for[Prompt for password when computer goes off standby] in [Control Panel] - [Power Op-tions] - [Advanced].Windows XPSelect the account to change in [Control Panel] - [User Accounts] and set the password, thenadd the check mark for [Prompt for password when computer resumes from standby] in[Control Panel] - [Performance and Maintenance] - [Power Options] - [Advanced].This means a floppy disk that does not contain system startup information has been left inthe floppy disk drive. Remove the floppy disk, and press any key.This message may appear when certain USB devices are connected. Remove the USBdevice, or set [Legacy USB support] in [Advanced] menu of the Setup Utility to [Disable].If the message still appears even after trying the above two measures, this may be anindication that some type of hard disk failure has occurred. Contact Panasonic TechnicalSupport.Windows 2000After reinstalling, setup Windows and then set the password again.Windows XPIf you have created a password reset disk ( page 14), a message is displayed when youfail to correctly enter the password. Follow the message’s instructions and set the passwordagain by using the password reset disk.If you have not created a password reset disk, after reinstalling, setup Windows and then setthe password again.When a problem occurs, refer to this page. The “Reference Manual” also contains detailed information. If a problem appears to berelated to a software application, read the software related manual. If you still cannot troubleshoot the problem, contact PanasonicTechnical Support. Starting Up
26TroubleshootingNo display after powering onThe power has not beenturned off, but after a cer-tain period of time, there isno displayWhen the battery pack isused, the screen is darkerthan when the AC adaptoris connectedAn afterimage appears (e.g.,green, red, and blue dotsremain on the display) orthere are dots not display-ing the correct colorsThe cursor cannot be con-trolled properlyWhen there is no display to an external display,• Check your cable connection to the external display.• Confirm your display is powered on.• Check the settings for your external display.Try changing the display by pressing Fn + F3 .When displaying only through an external display, if the computer is shut down by usingthe standby or hibernation function, there may be no display on the LCD unless theexternal display is connected when operations are resumed. In this case, connect theexternal display or press Fn + F3 .Has the computer been set to the power-saving mode? To resume operation of your computer from the condition the power of the display is off(for energy conservation purposes), press any key unrelated to the direct triggering of aselection, like Ctrl .To save power, your computer may have automatically entered the standby mode (powerindicator blinks green) or hibernation mode (power indicator turns off). In such cases,slide the power switch.If you want to switch the display destination repeatedly by pressing Fn + F3 , makesure that the display destination has switched completely each time before pressing Fn + F3 again.Press Fn + F2 and adjust the brightness. Note, however, that when the brightness isincreased, the battery running time will become shorter.Brightness can be set to separate levels for when the AC adaptor is connected and when it isdisconnected.If an image is displayed for a prolonged period of time, an afterimage may appear. Thisis not a malfunction. The afterimage will disappear when a different screen is displayed.High-precision and advanced technologies are necessary in the production of color liquidcrystal displays (color LCDs). Therefore, if 0.002% or less of the picture elements eitherfail to light or remain constantly lit (that is, more than 99.998% of elements are function-ing properly), no defect is considered to exist.Restart the computer by using the keyboard (Press , U , and select [Restart] with , then press Enter ).If the computer does not respond to keyboard commands, read “Computer hangs”( page 29).Be sure to use the Display Rotation Tool to rotate the display. DisplayPress F9 in the Setup Utility ( “Setup Utility”). This will restore the SetupUtility’s settings to their default values (except the password settings).Try removing all peripheral devices.Check a disk error using the following procedure. Windows 20001Select [Local Disk(C:)] with the right button in [My Computer], and select [Proper-ties].2Select [Tools] - [Check Now].3Select [Start] after selecting required items in [Check disk options]. Windows XP1Select [Local Disk(C:)] with the right button in [Start] - [My Computer], and select[Properties].2Select [Tools] - [Check Now].3Select [Start] after selecting required items in [Check disk options].At startup, hold down F8 when the [Panasonic] screen disappears, and release yourfinger when the Windows Advanced Options Menu is displayed. Start the computer inSafe Mode, and confirm the details of the error. Starting Up (continued)When the previous item isnot the causeDealing with Problems (Summary)
27TroubleshootingThe red indicator lightsThe red indicator blinksThe orange indicator blinksThe green indicator blinksThe battery indicator blinksgreen and orange alternatelyThe battery level is very low (the charge is less than approx. 9% capacity).Connect the AC adaptor. You can use the computer when the battery indicator light is or-ange. If you do not have an AC adaptor, save your data and power off your computer. Afterreplacing the battery pack with a fully charged one, turn your computer on.Quickly save your data and power off your computer. Remove the battery pack and discon-nect the AC adaptor, then connect them again.If the problem persists, contact Panasonic Technical Support. The battery pack or recharg-ing function may be defective.Battery cannot be recharged temporarily because the internal temperature of the battery packis outside of the acceptable temperature range for recharging. Once the allowable rangerequirement is satisfied, charging begins automatically. Your computer can be used normallyin this state.In high temperature mode, the battery pack is discharging to a level of 80%* in normaltemperature mode. ( “Battery Power”)Do not remove the battery pack while the battery indicator is blinking green.*A level of 80% in normal temperature mode is displayed as [100%] in high temperature mode.Warming up the system to prevent hard disk drive malfunctions at low temperature. Leaveyour computer as is. Once the allowable temperature range requirement is satisfied, yourcomputer will start automatically. Battery IndicatorThe cursor does not move inscrolling area of the touchpadThe external display nolonger displays properlyDuring simultaneous dis-play, the screen of the exter-nal display becomes disor-deredWhen the Microsoft® IntelliMouse™ Wheel mode or the original mode is set for the touchpad, only scroll operations are possible for the right part or bottom part of the touch pad. Inthis case, cursor operations are possible by using the work surface excluding the right part orbottom part. When no mode is set, the entire surface of the touch pad can be used for cursoroperations.When an external display is used that is incompatible with the power saving modes of thecomputer, the display may not function correctly when the computer enters the power sav-ing mode. In such cases, turn off the power to the external display.Try changing the display by pressing Fn + F3 .If you continue to experience problems, try changing the display in the following menu.Windows 2000[Start] - [Settings] - [Control Panel] - [Intel(R) Extreme Graphics].Windows XP[Start] - [Control Panel] - [Other Control Panel Options] - [Intel(R) Extreme Graphics] Display (continued)Is Acrobat Reader installed?If Acrobat Reader is not installed, run [c:\util\reader\acroreader51_enu_full.exe] in [Start] -[Run] to reinstall the program. When installing the program, do not change the installationdestination folder. If the destination folder is changed, the Reference Manual cannot beopened from the [Start] menu. Reference ManualThe Reference Manual isnot displayed
28TroubleshootingDealing with Problems (Summary)The display cannot be ro-tatedThe display cannot bechanged and the operationof the touch pad and thetouchscreen do not matchthe display angleThe display is not rotatedautomatically by switchingfrom Laptop mode to Tab-let mode, or vice versaWhen the display is rotated,an application error occursin explorer.exeWhen the screensaver startswhile the display is rotated,nothing is displayed on thescreenWindows 2000The operation of the touchpad and the touchscreen donot match the display angle Display RotationRemove the checkmark from [Hide modes that this monitor cannot display]*.*Windows 2000In [Start] - [Settings] - [Control Panel] - [Display] - [Settings] - [Advanced] - [Monitor].Windows XPIn [Start] - [Control Panel] - [Appearance and Themes] - [Display] - [Settings] - [Advanced] - [Monitor].Close any applications that are currently open.Windows 2000Add the checkmark for [Enable Rotation] in [Start] - [Settings] - [Control Panel] - [Intel(R)Extreme Graphics]When some applications are running (Outlook Express etc.), the display may not bechanged and the operation of the touch pad and the touchscreen may not match the dis-play angle. Press the rotation button 1 - 3 times (until the operation of the touch padand the touchscreen matches the display angle). After exiting the application, rotate thedisplay, then start up the application again.If the problem persists, restart the computer.Confirm that the default angle of each mode is correctly set. ( “Display Rotation”)Windows XPDo not switch from Laptop mode to Tablet mode, or vice versa, while Windows is in theprocess of switching users with the Fast User Switching function.Windows 2000Select [Center] for [Picture Display] in [Start] - [Settings] - [Control Panel] - [Display] -[Background].Windows XPSelect [Center] for [Position] in [Start] - [Control Panel] - [Appearance and Themes] - [Dis-play] - [Desktop].Some screensaver types do not display anything on the screen for the first minute or so. Trychanging the screensaver type.This problem may occur if the screen settings are changed while the display is rotated. Pressthe rotation button 1 - 3 times (until the operation of the touch pad and the touchscreenmatches the display angle).Windows cannot be shutdown or restarted“This program is not re-sponding” is displayedwhen shutting down or log-ging off Shutting downIf a USB device is connected, try removing it.This message appears periodically; for example, when using a Wireless LAN. If the mes-sage appears, select [End Now]. Delete the check mark for [Show the tray icon] in thefollowing menu.Windows 2000 : [Start] - [Programs] - [Intel Network Adapters] - [Intel(R) PROSet]Windows XP : [Start] - [All Programs] - [Intel Network Adapters] - [Intel(R) PROSet]
29TroubleshootingSome applications do notwork properly When switching to a different user with the Fast User Switching function, the followingproblems may occur.•Some applications may not work properly (for example, PDF files may not be printed properly).•Key combinations with Fn may not work.• It may not be possible to set the settings of the display.• A serial mouse may not work.• Wireless LAN may not work.If any of the above occurs, log on with the administrator authority again, not using the FastUser Switching function, and try the operation once more. Fast User Switching Function Windows XPPress Ctrl + Shift + Esc to open Task Manager and close the software applicationwhich is not responding.After shutting down by sliding the power switch for more than four seconds, slide thepower switch to power on and open the application again.If the program no longer works normally, delete the program using the following procedure.Then reinstall the program.Windows 2000 : [Start] - [Settings] - [Control Panel] - [Add/Remove Programs]Windows XP : [Start] - [Control Panel] - [Add or Remove Programs] OthersComputer hangs
30TroubleshootingReinstalling SoftwareBefore ReinstallationPreparing• BACKUP DISK(s) created in advance ( page 13)• Product Recovery CD-ROM (included)• Panasonic USB floppy disk drive (optional: CF-VFDU03)• Panasonic CD drive (optional: KXL-RW10AN <PC Card-compatible> or CF-VDRRT1 <USB>)When using a PC Card-compatible CD drive other than the Panasonic KXL-RW10AN CD drive: page 31ReinstallingImportantBefore the reinstallation procedure, remove all peripherals (except for the CD and floppy disk drive).Be sure the AC adaptor is connected until the reinstallation procedure is completed.When using the Panasonic KXL-RW10AN CD drive, set the switch of the PC Card to 16-bit.NOTE1Turn off the computer.2Connect the CD drive to the computer.<Only when using the Panasonic CD drive KXL-RW10AN>Connect the floppy disk drive to the USB port of the com-puter, then set the FIRSTAID FD in the floppy disk drive.3Turn the computer on, and press F2 while [Panasonic]screen is displayed.The Setup Utility will start up.If the password has been set, enter the Supervisor Pass-word.4Write down all of the contents of the Setup Utility and thenpress F9 .At the confirmation message, select [Yes] and press Enter .<Only when using the Panasonic CD drive CF-VDRRT1>Select [Boot] menu, then select [CD Drive] and press F6until [CD Drive] is at the top of the [Boot] menu.When reinstall procedure is performed, the contents of the hard disk will be erased. Be sure to back up any critical data that ison your hard disk before running the reinstall procedure.The reinstall procedure will return the computer to its original condition.• If you have created partitions for data, the data may be erased or become corrupt as a result of the reinstall procedure.5Place the disc number one of the recovery CDs into the CDdrive.6Press F10 .At the confirmation message, select [Yes] and pressEnter .The computer will restart, and this screen should appear.7Select [1. Start restoring the operating system.].The License Agreement screen should appear.---------------------------------------------------------------------Select a number---------------------------------------------------------------------1. Start restoring the operating system.2. Erase the whole data on HDD for security.3. End---------------------------------------------------------------------If you have not created the FIRSTAID FD, you can create by using the following procedure:Windows 2000[Create Backup Disk] in [Start] - [Programs] - [Panasonic].Windows XP[Create Backup Disk] in [Start] - [All Programs] - [Panasonic].If you can not create this disk, contact Panasonic Technical Support.
31Troubleshooting8Select [1. Yes, I agree to the provisions above and wish tocontinue!].This screen should appear.Windows 2000<When using a PC Card-compatible CD drive other thanthe Panasonic KXL-RW10AN>Copy the necessary drivers, from the floppy disk includedwith your CD drive, to the FIRSTAID FD with the methodbelow. It will be necessary to edit the CONFIG.SYS fileand AUTOEXEC.BAT file on the FIRSTAID FD. Whenediting the AUTOEXEC.BAT file, some CD drives requirecard managers (card and socket service). See the manualincluded with your CD drive for further details.1Start Windows and insert the FIRSTAID FD.2Windows 2000Select [Start]-[Programs]-[Accessories]-[Notepad]-[File]-[Open], input [a:\config.sys], then select [Open].Windows XPSelect [Start]-[All Programs]-[Accessories]-[Notepad]-[File]-[Open], input [a:\config.sys], then select [Open].3Rewrite the following line and save.Delete the following four lines.;KXL-RW10AN DRIVERDEVICE=A:\TOOLS\KMASMGRA.SYSDEVICE=A:\TOOLS\KMASASPA.SYSDEVICE=A:\TOOLS\KMASCDA.SYS /D:MSCD000Add the driver of your CD drive.Device=A:\DRIVER1.SYS /D:MSCD000Rewrite this driver for the driver of yourCD drive. The driver for the PC Card willalso be necessary. Refer to the operationmanual that accompanies the CD drive.Save the file and close [Notepad].4Copy the CD driver file (i.e., the driver file rewritten instep 3 ) of the CD drive below [a:\] of the FIRSTAIDFD.5Set the floppy disk to the write-protect state.After this, follow the reinstalling procedure of <Only whenusing the Panasonic CD drive KXL-RW10AN>.( page 30)When an UPDATE FD is to be created, follow the stepsin the readme.txt on the disk. ( page 13)NOTE---------------------------------------------------------------------Select a number---------------------------------------------------------------------1. Restore Windows(R) 2000 Professional to the whole HDD.2. Make two partitions, for the operating system and data. And restoreWindows(R) 2000 Professional to the operating system partition.(All existing partitions on HDD will be lost.)3. Restore Windows(R) 2000 Professional to the first partition.4. End------------------------------------------------------------------------------------------------------------------------------------------Select a number---------------------------------------------------------------------1. Restore Windows(R) XP Professional to the whole HDD.2. Make two partitions, for the operating system and data. And restoreWindows(R) XP Professional to the operating system partition.(All existing partitions on HDD will be lost.)3. Restore Windows(R) XP Professional to the first partition.4. End---------------------------------------------------------------------Windows XP9Make a selection from the menu.When selecting [2], enter the basic partition size for theoperating system installation and press Enter .(The data partition size is the remainder after subtract-ing the basic partition size.)To select [3], the initial partition size must be 6 GB ormore of the hard disk size. Reinstallation cannot be per-formed with a small partition size.10 At the confirmation message, press Y .The operation of reinstallation for the hard disk starts au-tomatically. (The operations take about 20 minutes <PCCard-compatible> or 50 minutes <USB>.)Do not cancel the reinstall procedure before it iscompleted.When a message appears instructing you to insertthe next CD, insert the recovery CD showing thenext number in the sequence, and then select [OK].If the message “The media does not contain the cor-rect file” appears, select [OK]. A message will ap-pear instructing you to insert the next CD.Confirm that the proper recovery CD has been in-serted by opening the tray of the CD drive and thenclose the tray, then select [OK].CAUTION14 Press F9 .At the confirmation message, select [Yes] and press Enter . (The Setup Utility settings will return to theirdefault values. Even the security settings with the excep-tion of the password(s) will return to their default values.)15 Press F10 .At the confirmation message, select [Yes] and press Enter .16 Perform the setup procedure for Windows by followingthe instructions on the screen. ( page 10 - 12)17 Run the Setup Utility and change the settings where nec-essary.11 After the reinstallation procedure completes, press any key.The computer will be shut down.<Only when using the Panasonic CD drive KXL-RW10AN>Remove the FIRSTAID FD and the floppy disk drive.12 Remove the recovery CD and the CD drive.13 Turn the computer on, and press F2 while [Panasonic]screen is displayed.The Setup Utility will start up.If the password has been set, enter the Supervisor Pass-word.
32AppendixYOU MAY NOT REVERSE ASSEMBLE, REVERSE COMPILE, OR MECHANICALLY OR ELECTRONICALLY TRACETHE PROGRAMS, OR ANY COPY THEREOF, IN WHOLE OR IN PART.YOU MAY NOT USE, COPY, MODIFY, ALTER, OR TRANSFER THE PROGRAMS OR ANY COPY THEREOF, INWHOLE OR IN PART, EXCEPT AS EXPRESSLY PROVIDED IN THE LICENSE.IF YOU TRANSFER POSSESSION OF ANY COPY OF ANY PROGRAM TO ANOTHER PARTY, EXCEPT AS PERMIT-TED IN PARAGRAPH E ABOVE, YOUR LICENSE IS AUTOMATICALLY TERMINATED.This license is effective only for so long as you own or lease the Product, unless earlier terminated. You may terminatethis license at any time by destroying, at your expense, the Programs and related documentation together with allcopies thereof in any form. This license will also terminate effective immediately upon occurrence of the conditionstherefor set forth elsewhere in this Agreement, or if you fail to comply with any term or condition contained herein. Uponany such termination, you agree to destroy, at your expense, the Programs and related documentation together with allcopies thereof in any form.A. MEI hereby grants you a personal, non-transferable and non-exclusive right and license to use the Programs inaccordance with the terms and conditions stated in this Agreement. You acknowledge that you are receiving onlya LIMITED LICENSE TO USE the Programs and related documentation and that you shall obtain no title,ownership nor any other rights in or to the Programs and related documentation nor in or to the algorithms,concepts, designs and ideas represented by or incorporated in the Programs and related documentation, all ofwhich title, ownership and rights shall remain with MEI or its suppliers.B. You may use the Programs only on the single Product which was accompanied by the Programs.C. You and your employees and agents are required to protect the confidentiality of the Programs. You may notdistribute or otherwise make the Programs or related documentation available to any third party, by time-sharingor otherwise, without the prior written consent of MEI.D. You may not copy or reproduce, or permit to be copied or reproduced, the Programs or related documentationfor any purpose, except that you may make one (1) copy of the Programs for backup purposes only in support ofyour use of the Programs on the single Product which was accompanied by the Programs. You shall not modify,or attempt to modify, the Programs.E. You may transfer the Programs and license them to another party only in connection with your transfer of thesingle Product which was accompanied by the Programs to such other party. At the time of such a transfer, youmust also transfer all copies, whether in printed or machine readable form, of every Program, and the relateddocumentation, to the same party or destroy any such copies not so transferred.F. You may not remove any copyright, trademark or other notice or product identification from the Programs andyou must reproduce and include any such notice or product identification on any copy of any Program.LICENSETERMYOU ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT, UNDERSTAND IT AND AGREE TO BE BOUNDBY ITS TERMS AND CONDITIONS. YOU FURTHER AGREE THAT IT IS THE COMPLETE AND EXCLUSIVE STATE-MENT OF THE AGREEMENT BETWEEN US, WHICH SUPERSEDES ANY PROPOSAL OR PRIOR AGREEMENT,ORAL OR WRITTEN, AND ANY OTHER COMMUNICATIONS BETWEEN US, RELATING TO THE SUBJECT MAT-TER OF THIS AGREEMENT.THE SOFTWARE PROGRAM(S) ("PROGRAMS") FURNISHED WITH THIS PANASONIC® PRODUCT ("PRODUCT")ARE LICENSED ONLY TO THE END-USER ("YOU"), AND MAY BE USED BY YOU ONLY IN ACCORDANCE WITHTHE LICENSE TERMS DESCRIBED BELOW. YOUR USE OF THE PROGRAMS SHALL BE CONCLUSIVELY DEEMEDTO CONSTITUTE YOUR ACCEPTANCE OF THE TERMS OF THIS LICENSE.Matsushita Electric Industrial Co., Ltd. ("MEI") has developed or otherwise obtained the Programs and hereby licensestheir use to you. You assume sole responsibility for the selection of the Product (including the associated Programs) toachieve your intended results, and for the installation, use and results obtained therefrom.LIMITED USE LICENSE AGREEMENTAbout Intel® software productsThe enclosed software products and documentation were developed at private expense, and are provided with “RESTRICTEDRIGHTS.” Use, duplication or disclosure by the government is subject to restrictions as set forth in FAR 52.227-14 andDFARS 252.227-7013 et. seq. or its successor. The use of this product by the government constitutes acknowledgment ofIntel's proprietary rights in the product.
33AppendixAppendixA. MEI vous octroie par les présentes le droit et la licence personnels, non cessibles et non exclusifs d'utiliser lesLogiciels conformément aux termes, clauses et conditions de ce Contrat. Vous reconnaissez ne recevoir qu'undroit limité d'utiliser les Logiciels et la documentation les accompagnant et vous vous engagez à n'obtenir aucundroit de titre, propriété ni aucun autre droit vis-à-vis des Logiciels et de la documentation les accompagnant nivis-à-vis des algorithmes, concepts, dessins, configurations et idées représentés par ou incorporés dans lesLogiciels et la documentation les accompagnant, dont les titres, propriété et droits resteront tous à MEI ou àleurs propriétaires.B. Vous ne pouvez utiliser les Logiciels que sur le Produit unique qui est accompagné par les Logiciels.C. Vous et vos employés ou agents êtes requis de protéger la confidentialité des Logiciels. Vous ne pouvez nidistribuer ni mettre les Logiciels et la documentation les accompagnant à la disposition d'un tiers, par partage detemps ou de quelque autre manière que ce soit, sans l'autorisation écrite préalable de MEI.D. Vous ne pouvez ni copier ni reproduire ni permettre la copie ni la reproduction des Logiciels ni de la documen-tation les accompagnant pour quelque fin que ce soit, à l'exception d'une (1) copie des Logiciels à des fins desauvegarde uniquement pour soutenir votre utilisation des Logiciels sur le Produit unique qui est accompagnépar les Logiciels. Vous ne pouvez ni modifier ni tenter de modifier les Logiciels.E. Vous ne pouvez céder les Logiciels et en octroyer la licence à une autre partie qu'en rapport avec votre cessiondu Produit unique qui est accompagné par les Logiciels à cette autre partie. Au moment de cette cession, vousdevez céder également toutes les copies, que ce soit sous forme imprimée ou lisible par la machine, de tous lesLogiciels ainsi que de la documentation les accompagnant, à la même partie ou détruire les copies non cédées.F. Vous ne pouvez retirer aucune marque de droits d'auteur, marque ou autre ni aucune identification de produitdes Logiciels et vous devez reproduire et inclure toutes ces notices ou identifications de produit sur toutes lescopies des Logiciels.Vous ne pouvez assembler en sens inverse, compiler en sens inverse ni retracer les Logiciels ni aucune de leurscopies, de façon électronique ou mécanique, en tout ou en partie.Vous ne pouvez utiliser, copier, modifier, altérer ni céder les Logiciels ni aucune de leurs copies, en tout ou en partie,à l'exception de ce qui est expressément stipulé dans ce contrat.Si vous cédez la possession de toute copie ou de tout Logiciel à une autre partie, à l'exception de ce qui est autoriséau paragraphe E ci-dessus, votre licence est automatiquement résiliée.LicenceTermes, clauses et conditionsCette licence n'est effective que pour la durée de possession ou de crédit-bail du Produit, à moins d'une résiliationantérieure. Vous pouvez résilier cette licence à tout moment en détruisant, à vos frais, les Logiciels et la documentationles accompagnant avec toutes leurs copies, sous quelque forme que ce soit. Cette licence sera également résiliée,avec application immédiate, si les conditions de résiliation définies ailleurs dans ce contrat se sont réalisées ou si vousne respectez pas les termes, clauses et conditions qui y sont contenues. Au moment de la résiliation, vous acceptez dedétruire, à vos frais, les Logiciels et la documentation les accompagnant avec toutes leurs copies, sous quelque formeque ce soit.Vous reconnaissez avoir lu ce contrat, en avoir compris toute la substance et avoir accepté de respecter ses termes,clauses et conditions. Vous reconnaissez en outre qu'ils sont la description complète et exclusive du contrat concluentre nous, contrat qui remplace et annule toute proposition ou contrat précédent, écrit ou oral, et toute autre commu-nication entre nous, relativement à l'objet du présent contrat.Le(s) logiciel(s) (les "Logiciels") fournis avec ce produit Panasonic® (le "Produit") sont exclusivement concédés enlicence à l'utilisateur ultime ("vous"), et ils ne peuvent être utilisés que conformément aux clauses contractuelles ci-dessous. En utilisant les logiciels, vous vous engagez de manière définitive à respecter les termes, clauses et condi-tions des présentes.Matsushita Electric Industrial Co., Ltd. ("MEI") a mis au point ou obtenu les Logiciels et vous en concède l'utilisation parles présentes. Vous assumez l'entière responsabilité du choix de ce Produit (y compris des Logiciels associés) pourobtenir les résultats escomptés, ainsi que de l'installation, de l'utilisation et des résultats obtenus.Contrat de licence d'usage limité
34AppendixHard Disk Data Erase UtilityProcedure1Turn off the computer.2Connect the CD drive to the computer.<Only when using the Panasonic CD drive KXL-RW10AN>Connect the floppy disk drive to the USB port of the com-puter, then set the FIRSTAID FD in the floppy disk drive.3Turn the computer on, and press F2 while [Panasonic]screen is displayed.The Setup Utility will start up.If the password has been set, enter the Supervisor Password.4Press F9 .At the confirmation message, select [Yes] and then press Enter .<Only when using the Panasonic CD drive CF-VDRRT1>Select [Boot] menu, then select [CD Drive] and press F6 until [CD Drive] is at the top of the [Boot] menu.5Place disc number one of the recovery CDs into the CD drive.6Press F10 .At the confirmation message, select [Yes] and press Enter .The computer will restart, and this screen should appear.This computer is equipped with a utility for erasing hard disk data.When disposing of or transferring ownership of this device, erase all data on the hard disk in order to prevent the theft of hard diskdata following the steps below.The hard disk data erase utility erases data using an “overwriting” method, but there is a possibility that due to malfunctions orother operational errors, data may not be completely erased. There are also specialized devices that may be able to read datathat has been erased using this method. If you need to erase highly confidential data, we recommend that you contact acompany that specializes in this process. Matsushita Electric Industrial Co., Ltd. will bear no responsibility for losses ordamages suffered as a result of the use of this utility.NOTEBe sure the AC adaptor is connected until the procedure is completed.This utility can only be used for internal hard disk. It cannot be used to erase data from external hard disks.This utility cannot erase data from damaged disk.This utility cannot erase data for specific partitions.After executing this utility, the computer cannot be booted from the hard disk.If you have not created the FIRSTAID FD, you can create by using the following procedure:Windows 2000 : [Create Backup Disk] in [Start] - [Programs] - [Panasonic].Windows XP : [Create Backup Disk] in [Start] - [All Programs] - [Panasonic].If you can not create this disk, contact your Panasonic Technical Support.When using the Panasonic KXL-RW10AN CD drive, set the switch of the PC Card to 16-bit.PreparingProduct Recovery CD-ROMPanasonic CD drive (optional: KXL-RW10AN <PC Card-compatible> or CF-VDRRT1 <USB>)<Only when using the CD-ROM drive Panasonic KXL-RW10AN>Panasonic USB floppy disk drive (optional CF-VFDU03)FIRSTAID FD created in advance ( page 13)---------------------------------------------------------------------Select a number---------------------------------------------------------------------1. Start restoring the operating system.2. Erase the whole data on HDD for security.3. End---------------------------------------------------------------------7Select [2. Erase the whole data on HDD for security.].8At the confirmation message, press Y .9At [<<< Start menu >>>], press Enter .10 The approximate time required for erasing data will be dis-played.Press Space .11 At the confirmation message, press Enter .The operation of erasing the hard disk starts.(If necessary, the “hard disk data erase” operation can becancelled after it has begun by pressing Ctrl + C .If the operation is cancelled before being completed, a partof the data will not be erased.)12 After the operation is complete:Under normal conditions, the message [Hard disk data hasbeen deleted.] will be displayed.Press any key. The computer will be shut down.If a problem occurred during the operation, an error mes-sage will be displayed.<Only when using the Panasonic CD drive KXL-RW10AN>Remove the FIRSTAID FD and the floppy disk drive.13 Remove the recovery CD and the CD drive.
35AppendixAppendixNames and Functions of Parts( “Wireless LAN”)Wireless LAN AntennaFor information on the key com-binations available. ( “Key Combinations”)LCD ( “Hard Disk Drive”)( “Battery Power”)Keyboard( “LED Indicators”)Caps LockNumeric Key (NumLk)Scroll Lock (ScrLk)Hard disk drive statusBattery pack statusPower statusBefore using the computerfor the first time, carefullyread the [LIMITED USE LI-CENSE AGREEMENT]. Ifyou agree to the conditions,remove the seal.( “Tablet Buttons”)LCD brightness controlInput PanelEnterRotationSecurity( page 19)Touch PadStylusPower Switch( page 20)LED Indicators( page 20)Function KeysHard Disk DriveBattery PackA lithium ion battery that is recyclable powers the product you have purchased. Please call 1-800-8-BATTERY for information on how to recycle this battery.L’appareil que vous vous êtes procuré est alimenté par une batterie au lithium-ion. Pour desrenseignements sur le recyclage de la batterie, veuillez composer le 1-800-8-BATTERY.Tablet Buttons
36Appendix( “PC Cards”)PC Card Slots( “Modem”)Modem( “LAN”)LAN( “USB Devices”)USB PortsDC IN 16.0 VDC-IN JackUse this port to a serial mouse or serialcommunication devices.A cable can be connected to preventtheft of your computer. For more infor-mation, read the manual provided withthe cable.LOCK( “External Display”)Use only a monaural condenser micro-phone (miniature jack). Using an inputsource other than a monaural condensermicrophone may not allow audio to beinput or may damage the equipment.Microphone JackUse this jack to connect headphones oramplifier-equipped speakers. Audiooutput from the internal speaker is dis-abled when headphones or externalspeakers are connected.Headphone JackSecurity LockNames and Functions of PartsSerial PortExternal Display PortThe strap has been designed to carry only the weight of thecomputer. Therefore, be sure that the strap does not carry a weightthat exceeds the weight of the computer. The strap may acci-dentally come loose from the computer.Do not use a strap that is damaged or about to tear.CAUTIONThe hand strap can be attached to any two of the four corners usingscrews (A) which were used to attach the hand strap.Adjust the length of the belt so that the computer does not fall by mis-take, and firmly hold the computer when using it.(The above illustration shows the positionwhere the hand strap is attached at the factory.)The shoulder strap can be connected to thehand strap to make it longer.Hand StrapShoulder Strap
37AppendixAppendixTo adjust the volume: Fn + F5 / Fn + F6Speaker on/off : Fn + F4( “Port Replicator”)Speaker ( “RAM Module”)RAM Module SlotCAUTIONDo not allow metallic objects or magnetic media to come in close proximityto the speaker on the bottom surface of the computer.• Because the speaker contains a magnet, metal objects may become attachedto the bottom surface of the computer. This may cause the computer to beunstable, or may mark the surface of the desk on which it is sitting.• If floppy disks, magnetic memory cards, or other magnetic media approachthe speaker, there is a risk that data will be destroyed.The external antenna connector is for use asan extension in the future.CAUTIONFCC RF Exposure Warning:This transmitter must not be co-located oroperated in conjunction with any other an-tenna or transmitter.Optional Port Replicator contains TNC con-nector for external mounted antenna. Em-ployed antenna cannot exceed 7 dBi an-tenna gain and must be professionally in-stalled. Also, must maintain minimum 20cm spacing between external antenna andall person’s body during wireless mode ofoperation.Expansion Bus ConnectorExternal Antenna Connectors
38AppendixNames and Functions of PartsUsing the TetherThe tether can be attached to the bottom right or bottom left corner of the display. It preventsthe stylus (included) from falling accidentally.Attaching the Tether1234TetherCAUTIONWhen closing the display, be careful not to catch the tether between the display and mainpart of the computer. (See the figure below.)
39AppendixAppendixSpecificationsCF-18BHAZXDM/CF-18BHAZXKMIntel® Pentium M processor 900 MHz ULV1 MB256 MB (768 MB Max.)UMA (64 MB Max.)10.4 type (TFT)256/65536/16M colors (640 x 480 dots/800 x 600 dots/1024x768 dots)256/65536/16M colors (640 x 480 dots/800 x 600 dots/1024x768 dots/1280x1024dots)*240 GB*3Windows keyboard (82 keys)Touch PadTouchscreen (Anti-Reflection, Stylus (included) touch capable)Two Type I or Type II, or one Type III3.3 V: 400 mA, 5 V: 400 mA200-pin, SO-DIMM, 2.5 V, DDR-SDRAM, PC2100 CompliantDsub 9-pin MaleMiniature jack, 3.5 DIAMiniature jack, 3.5 DIA4-pin x 2, USB2.0RJ-11 Data:56 kbps (V.92 & K56flex*6) FAX:14.4 kbpsRJ 45 IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX802.11bDedicated 100-pin femaleDedicated 50 Ω coaxial connector x 2Monaural SpeakerAC ’97 2.1 Compatible, 18 bits full duplex stereoLi-ion 7.4 V, 6.6 AhWindows 2000 Approx. 4 hours - 7.5 hours*8 (Approx. 5.5 hours*9)Windows XP Approx. 4 hours - 8 hours*8 (Approx. 6 hours*9)Approx. 7 hApprox. 3.5 hCoin type lithium battery 3.0 VInput : 100 V - 240 V AC, 50 Hz / 60 Hz Output : 16.0 V DC, 2.5 AApprox. 18 W*12 / Approx. 41 W (maximum when recharging in the ON state)5 °C to 35 °C {41 °F to 95 °F}30% to 80% RH (No condensation)-20 °C to 60 °C {-4 °F to 140 °F}30% to 90% RH (No condensation)271 mm X 49 mm X 216 mm {10.7 " X 1.93 " X 8.5 "}Approx. 2.0 kg {Approx. 4.5 lb.}Model No.CPUL2 (Second) Cache MemoryMemoryVideo MemoryLCD TypeDisplayed Colors*1External DisplayHard Disk DriveKeyboardPointing DevicePC Card SlotAllowable current (total for two slots)RAM Module Slot*4Serial PortMicrophone Jack*5Interface Headphone JackUSB PortModemLANWireless LANExpansion Bus ConnectorExternal Antenna ConnectorSpeakerSoundBattery PackOperating Time*7Charging Time*7Power OnPower OffClock BatteryAC Adaptor*10Power Consumption*11EnvironmentIn use TemperatureHumidityNot in useTemperatureHumidityPhysical Dimensions*13 (W X H X D)Weight*13*1A 16M color display is achieved by using the dithering function.Windows XP : 256 color depth and the resolution of 640 x 480 are not supported.*2Maximum resolution depends on the specifications of the external display.Windows XP : 256 color depth and the resolution of 640 x 480 are not supported.*31GB = 109 bytes*4Only a RAM card designed for PC2100 can be added.*5Use only a monaural condenser microphone.*6The settings for the K56flex modem need to be changed according to the AT command.*7Varies depending on the usage conditions.*8Measured using BatteryMarkTM Version 4.0.1 (LCD brightness: Maximum - Minimum)*9Measured using MobileMarkTM 2002 (LCD brightness: 60 cd/m2)*10 <Only for North America>The AC adaptor is compatible with power sources up to 240 V AC adaptor.This computer is supplied with a 125 V AC compatible AC cord.*11 Approx. 0.7 W when the battery pack is fully charged (or not being charged) and the computer is off.Approx. 1.5 W when the Wake up from LAN function has been enabled.*12 Rated power consumption.*13 The dimensions and weight do not include the hand strap.Main Specifications
40AppendixCF-18BHAZXDMMicrosoft® Windows® 2000 Professional withService Pack3 (NTFS File System)Setup UtilityDMI ViewerAdobe® Acrobat® ReaderIntel® SpeedStep™ technology AppletIntel® PROSetWLAN Security ClientWireless LAN SwitchPanasonic Hand WritingSoftware KeyboardDisplay Rotation ToolHard Disk Data Erase Utility*SoftwareModel No.Operating SystemUtility ProgramsCF-18BHAZXKMMicrosoft® Windows® XP Professional withService Pack1 (NTFS File System)Setup UtilityDMI ViewerAdobe® Acrobat® ReaderIntel® PROSetWLAN Security ClientWireless LAN SwitchPanasonic Hand WritingSoftware KeyboardDisplay Rotation ToolHard Disk Data Erase Utility** The Product Recovery CD-ROM is required.Specifications
41AppendixAppendixLIMITED WARRANTYPANASONIC PERSONAL COMPUTER AND PERIPHERALS LIMITED WARRANTYPanasonic Computer Solutions Company (referred to as “Panasonic”) will repair this product (other than software, which is covered by a separatewarranty) with new or rebuilt parts, free of charge in the U.S.A. for three (3) years from the date of original purchase in the event of a defect in materialsor workmanship. This warranty includes the AC adaptor but excludes the batteries and all other options and accessories which are covered for aperiod of one (1) year from the date of purchase.This warranty is extended solely to the original purchaser. A purchase receipt or other proof of date of original purchase will be required beforewarranty performance is rendered.This warranty only covers failures due to defects in materials or workmanship which occur during normal use. It does not cover damage which occursin shipment or failures which are caused by products not supplied by Panasonic, or failures which result from alteration, accident, misuse, introductionof liquid or other foreign matter into the unit, abuse, neglect, installation, maladjustment of consumer controls, improper maintenance, modification orservice by anyone other than a Factory Service Center or authorized Panasonic Service Dealer, or damage that is attributable to acts of God.Limits and Exclusions:There are no other express warranties except as listed below.PANASONIC SHALL NOT BE LIABLE FOR LOSS OF DATA OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THEUSE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDINGTHE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO THE APPLICABLE WARRANTYPERIOD SET FORTH ABOVE. Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how longan implied warranty lasts, so the above limitations or exclusions may not apply to you.This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state. If a problem with your productdevelops during or after the warranty period, you may contact our representatives at 1-800-LAPTOP5. If the problem is not handled to your satisfac-tion, then write to the Consumer Affairs Division at the address indicated below.SOFTWARE LIMITED WARRANTYPanasonic Computer Solutions Company (referred to as “Panasonic”) warrants to you only that the disk(s) or other media on which the Programs arefurnished will be free from defects in materials and workmanship under normal use for a period of sixty (60) days from the date of delivery thereof toyou, as evidenced by your purchase receipt.This is the only warranty Panasonic makes to you. Panasonic does not warrant that the functions contained in the Programs will meet your require-ments or that the operation of the Programs will be uninterrupted or error free.Panasonic’s entire liability, and your exclusive remedy under this warranty shall be limited to the replacement, in the United States, of any defectivedisk or other media which is returned to Panasonic’s Authorized Service Center, together with a copy of the purchase receipt, within the aforesaidwarranty period.Anything in the foregoing to the contrary notwithstanding, Panasonic shall have no obligation for any defects in the disk(s) or other media on which thePrograms are furnished resulting from your storage thereof, or for defects that have been caused by operation of the disk(s) or other media otherwisethan on the Product or in environmental conditions other than those specified by Panasonic by alteration, accident, misuse, abuse, neglect, mishan-dling, misapplication, installation, maladjustment of consumer controls, improper maintenance, modification of damage that is attributable to acts ofGod. In addition, Panasonic shall have no obligation for any defects in the disk(s) or other media if you have modified, or attempted to modify anyProgram.DURATION OF IMPLIED WARRANTIES, IF ANY, IS LIMITED TO SIXTY (60) DAYS.PANASONIC ASSUMES NO RISK OF AND SHALL NOT IN ANY CASE BE LIABLE FOR ANY DAMAGES, INCLUDING, WITHOUT LIMITATION,ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL, OR PUNITIVE DAMAGES ARISING FROM BREACH OF WARRANTY OR CONTRACT, NEGLI-GENCE OR ANY OTHER LEGAL THEORY, INCLUDING, WITHOUT LIMITATION LOSS OF GOODWILL, PROFITS OR REVENUE, LOSS OF USEOF THE PROGRAMS OR PRODUCTS OR ANY ASSOCIATED EQUIPMENT, COST OF CAPITAL, COST OF ANY SUBSTITUTE EQUIPMENT,FACILITIES, SERVICES, DOWNTIME COSTS, OR CLAIMS OF ANY PARTY DEALING WITH YOU FOR SUCH DAMAGES.Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, sothe above limitations or exclusions may not apply to you.This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state.This Limited Warranty will be governed by the laws the State of New York, without regard to its conflict-of-laws rules.* * *To obtain service or technical assistance within the continental U.S.A. and Alaska.DIAL TOLL FREE: 1-800-LAPTOP5Correspondence requesting product information should be sent to:Panasonic Computer Solutions Company50 Meadowlands Parkway, Panazip 2F-5, Secaucus, NJ 07094For U.S.A.
42AppendixPANASONIC COMPUTER AND PERIPHERALS LIMITED WARRANTYCoverage – Panasonic Canada Inc. (“PCI”) warrants to you, the first end user customer, this computer product (excluding software media), whenpurchased from PCI or from a PCI authorized reseller, to be free from defects in materials and workmanship under normal use, subject to the termsset forth below, during the period of warranty coverage specified.Remedy – In the event of a warranty claim, contact PCI’s representatives within the applicable warranty period, identifying the nature of the defectclaimed, at 1-800-668-8386 between 9:00 A.M. and 5:00 P.M., Eastern Time Zone, Mon. – Fri. (excluding holidays) for instructions on how to obtainservice. A purchase receipt or other proof of date of original purchase is required before warranty service is performed. Defective parts covered bythis Limited Warranty will be repaired or replaced with new or comparable rebuilt parts on an exchange basis. Warranty replacement or repair issubject to the terms of this Limited Warranty for the balance of the original period of warranty coverage.No Coverage – This Limited Warranty does not cover products purchased outside Canada. Neither does it cover damage to, failure of, or defects ina product or accessory through mishandling, improper installation, abnormal use, misuse, neglect, accident, introduction of liquid or other foreignmatter into the product, alteration or servicing by anyone not authorized by PCI, or act of God.IF YOU SHIP THE PRODUCT FOR WARRANTY SERVICECarefully pack the product, preferably in the original carton. Include details of defect claimed and proof of date of original purchase. No liability isassumed for loss or damage to the product while in transit, if you chose your own transportation carrier.SOFTWARE MEDIA LIMITED WARRANTYCoverage – Panasonic Canada Inc. (“PCI”) warrants to you, the first end user customer, that the disk(s) or other media on which software program(s)is/are supplied will be free from defects in materials and workmanship under normal use in Canada for a period of sixty (60) days from date of receiptas evidenced by your purchase receipt for your Panasonic Computer product.THIS IS THE ONLY WARRANTY THAT PCI MAKES RESPECTING THE SOFTWARE MEDIA. PCI does not warrant the software. Please refer to thesoftware licensor’s written warranty (accompanying the copy of the software) for any software warranty claim.Claim Procedure – In the event of a defect in material or workmanship in the media during the sixty (60) day warranty period, and you return it,transportation costs prepaid, to Panasonic Canada Inc., Computer Products Marketing, at the above address, within the warranty period, togetherwith a copy of your purchase receipt, and an explanation of the suspected defect, PCI will replace in Canada the defective disk(s) or other media.Remedy – PCI’s entire liability, and your only remedy for any breach of this software media warranty is limited to replacement of the media only. Itdoes not cover any other damages, including, but not limited to, loss of use or profit loss, or special, indirect or consequential damages, or otherclaims, whether or not of similar character.No Coverage – This limited warranty does not apply if the disk(s) or other media has been used in other than a Panasonic product, or in environmen-tal conditions other than those specified by PCI or the manufacturer, or if subjected to misuse, neglect, mishandling, modification or attemptedmodification of the program, or if damaged by accident or act of God. PCI is not responsible for damage to or loss of any program, data or removablestorage media.GENERALNO OTHER WARRANTIES – PCI DISCLAIMS ALL OTHER WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, WITH RESPECT TO THE SOFTWARE, SOFT-WARE MEDIA, COMPUTER PRODUCT, OPTIONS AND ACCESSORIES.NO LIABILITY FOR CONSEQUENTIAL DAMAGES – IN NO EVENT SHALL PCI BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUEN-TIAL DAMAGES ARISING FROM ANY BREACH OF THE LIMITED WARRANTIES SET OUT IN THIS DOCUMENT, OR FROM THE USE OF THECOMPUTER PRODUCT, INCLUDING, WITHOUT LIMITATION, LOSS OF DATA, BUSINESS, PROFIT OR GOODWILL.IN ANY EVENT, PCI’S MAXIMUM LIABILITY FOR ANY BREACH SHALL NOT EXCEED THE AMOUNT ACTUALLY PAID BY YOU FOR THECOMPUTER PRODUCT.NO ACTION, REGARDLESS OF ITS BASIS, MAY BE BEGUN AGAINST PCI MORE THAN TWO (2) YEARS AFTER THE CAUSE OF ACTIONAROSE.Statutory Warranties – Some jurisdictions do not allow these limitations or exclusions, so they may not apply to you.Scope of CoverageWhole Product (except Batteries), AC adaptor and CD-ROM(if factory installed)Batteries, CD-ROM (unless factory installed), Port Replicator,Extra Memory Modules and all other Peripherals, Options andAccessoriesPeriod of CoverageThree (3) Years from Date of OriginalEnd User Customer PurchaseOne (1) Year from Date of Original EndUser Customer PurchaseType of Failure CoverageDefective Materials or WorkmanshipDefective Materials or WorkmanshipFor CanadaLIMITED WARRANTY
43AppendixAppendixMemo
Outline of the International ENERGY STAR® Office Equipment ProgramThe international ENERGY STAR® Office Equipment Program is an international programthat promotes energy saving through the use of computers and other office equipment.The program backs the development and dissemination of products with functions thateffectively reduce energy consumption. It is an open system in which business proprietorscan participate voluntarily. The targeted products are office equipment such as computers,displays, printers, facsimiles, and copiers. Their standards and logos are uniform amongparticipating nations.As an ENERGY STAR® Partner, Matsushita Electric Industrial Co., Ltd. hasdetermined that this product meets the ENERGY STAR® guidelines for energyefficiency.© 2003 Matsushita Electric Industrial Co., Ltd. All Rights Reserved.Printed in JapanFJ0803-0DFQX5421ZAPanasonic Computer Solutions Company50 Meadowlands Parkway, Panazip 2F-5,Secaucus, NJ 07094Panasonic Canada Inc.5770 Ambler Drive Mississauga,Ontario L4W 2T3
This manual contains supplementary instructions regarding the use of the computer. It explains the cases where the operation of thecomputer differs from that in the Operating Instructions.Your computer is equipped with Wireless LAN enabling you to communicate using radio frequencies.Supplementary Instructionsfor Wireless LAN
For U.S.A.Federal Communications Commission RadioFrequency Interference StatementNote: This equipment has been tested and found to comply with thelimits for a Class B digital device, pursuant to Part 15 of the FCCRules. These limits are designed to provide reasonable protectionagainst harmful interference in a residential installation. Thisequipment generates, uses and can radiate radio frequency energyand, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However,there is no guarantee that interference will not occur in a particularinstallation. If this equipment does cause harmful interference toradio or television reception, which can be determined by turningthe equipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit differentfrom that to which the receiver is connected.Consult the Panasonic Service Center or an experienced ra-dio/TV technician for help.WarningTo assure continued compliance, use only shielded interfacecables when connecting to a computer or peripheral. Also, anychanges or modifications not expressly approved by the partyresponsible for compliance could void the user’s authority tooperate this equipment.FCC RF Exposure Warning:• This computer is provided with PC Card slots that could beused with wireless transmitter(s), which will be specificallyrecommended, when they become available. Other third-partywireless transmitter(s) have not been RF exposure evaluatedfor use with this computer and may not comply with FCC RFexposure requirements.• This equipment complies with FCC radiation exposure limitsset forth for an uncontrolled environment.• This equipment must be installed and operated in accordancewith provided instructions and minimum 1.5 cm spacing mustbe provided between antenna and all person’s body (exclud-ing extremities of hands, wrist and feet) during wireless modesof operation.• This equipment may use multiple installed transmitters, whichmay be capable of simultaneous transmission.This device complies with Part 15 of the FCC Rules. Operationis subject to the following two conditions:(1) This device may not cause harmful interference, and(2) This device must accept any interference received, includinginterference that may cause undesired operation.Responsible Party: Matsushita Electric Corporation of AmericaOne Panasonic WaySecaucus, NJ 07094Tel No:1-800-LAPTOP-5 (1-800-527-8675)Replace the “Federal Communications Commission Radio Frequency Interference Statement” ( Operating Instructions “ReadMe First”) with the following.Information to the UserThis product and your HealthThis product, like other radio devices, emits radio frequency elec-tromagnetic energy. The level of energy emitted by this producthowever is far much less than the electromagnetic energy emittedby wireless devices like for example mobile phones.Because this product operates within the guidelines found in radiofrequency safety standards and recommendations, we believe thisproduct is safe for use by consumers. These standards and recom-mendations reflect the consensus of the scientific community andresult from deliberations of panels and committees of scientists whocontinually review and interpret the extensive research literature.In some situations or environments, the use of this product may berestricted by the proprietor of the building or responsible representa-tives of the organization. These situations may for example include:Using this product on board of airplanes, orIn any other environment where the risk of interference to otherdevices or services is perceived or identified as harmful.If you are uncertain of the policy that applies on the use of wirelessdevices in a specific organization or environment (e.g. airports),you are encouraged to ask for authorization to use this productprior to turning on the product.Regulatory InformationWe are not responsible for any radio or television interference causedby unauthorized modification of this product. The correction of in-terference caused by such unauthorized modification will be the re-sponsibility of the user. We and its authorized resellers or distribu-tors are not liable for damage or violation of government regulationsthat may arise from failing to comply with these guidelines.SpecificationsWireless LAN moduleData transfer ratesStandards supportedTransmission methodWireless channels usedRF frequency bandIEEE802.11g : 54 Mbps/48 Mbps/36 Mbps/24 Mbps/18 Mbps/12 Mbps/9 Mbps/6 Mbps(automatically switched)IEEE802.11b : 11 Mbps/5.5 Mbps/2 Mbps/1 Mbps (automatically switched)IEEE802.11g/IEEE802.11bOFDM system, DSSS systemChannels 1 to 112.412 GHz ~ 2.462 GHz
3Wireless LANIf you use a wireless LAN, you can use a network without cable connections.CAUTIONzCommunication is performed through the wireless LAN antenna. Do not block the antenna area with your hand or otherwise interfere with the passage of the radio signals.NOTEzThe communication speeds and distances differ depending on the devices that support the wireless LAN, the installation environment and other ambient conditions.zOne characteristic of radio waves is that their transmission rate tends to drop as the communication distance increases. It is recommended that the devices supporting the wireless LAN be used in close vicinity to each other.zThe rate may drop while a microwave oven is being used.Windows XPzDo not use the Fast User Switching function.Do not use wireless LAN on airplanes, in hospitals, or in other locations where wireless LAN signals may affect the operation of devices in the vicinity.zIf you intend to use the computer in the environments described above, turn the wireless LAN off using the following method:1Double-click or on the taskbar.2Select your wireless LAN adaptor and select [General].3Select [Off] for [Switch radio].4Select [OK].The icon will turn to .Precautions
4Wireless LANTo prevent theft of data or unauthorized access to the hard disk via a wireless LAN.z If you plan to use wireless LAN functions, we recommend that you do so only after making the appropriate security settings, such as for data encryption.We recommend turning the wireless LAN off when it is not used or out of range.zIf you leave the wireless LAN on, the battery's operating time is shortened.To use the wireless LAN, set the profile using the following procedure.The settings will vary for different network environments depending on the network system being used. For more details, ask your system administrator or the person in charge of the network.CAUTIONzSet profiles for each user using the following procedure.NOTEWindows XPzIf [Windows XP is currently configured to manage the Intel(R) PRO/Wireless LAN adaptor.] is displayed, select [Yes].Windows 2000zAfter setting the profile, delete the profile displayed at the time of purchase (profile name: Default).1Double-click on the taskbar.2Select your wireless LAN adapter and select [General].3Select [On] for [Switch radio].The Settings
5Wireless LAN4Select [Networks] and select [Add]. 5Enter the profile name and network name (SSID), and then make other necessary changes, then select [Next].6Make necessary changes and select [Finish].7Select [OK].NOTEzAbout WLAN Security ClientWLAN Security Client is an implementation of the client side of the IEEE 802.1X-Port Based Network Access Control protocol. • Since the WLAN Security Client has already started when is displayed on the taskbar, do not double-start it. If is not displayed, start up the WLAN Security Client in the following menu.Windows XPSelect [Start] - [All Programs] - [Intel] - [WLAN Security Client Manager].Windows 2000Select [Start] - [Programs] - [Intel] - [WLAN Security Client Manager].• For more information about how to use the WLAN Security Client, refer to [Help] in the menu bar or;Windows XPSelect [Getting Started Guide] or [User's Guide] in [Start] - [All Programs] - [Intel].Windows 2000Select [Getting Started Guide] or [User's Guide] in [Start] - [Programs] - [Intel]. Select or on the taskbar to check the communication status.For more information about how to use the Intel PROSet, refer to [Help] in the menu bar.Check the Communication Status
6Wireless LANIf the function fails to operate correctlyRead the operating instructions for the access point carefully and check the settings.The access point fails to be displayed in [Available Networks]zSelect the profile you are using, and select [Advanced] in [Networks]. [Connect to ad hoc networks only] may have been selected in [Connection preference]. In this case, select [Connect to infrastructure and ad hoc networks].zThis computer uses channels 1 through 11*1. Check the channel being used.*1 In the case of wireless communications, the frequency band being used can be divided into segments, so that different communications can be conducted on each band segment. A "Channel" refers to the individual frequency bandwidth divisions.The access point cannot be accessedzThe network key setting may not conform to the access point.Check the network key setting of the access point and, if necessary, set it again correctly.zDepending on the access point and settings, access may not be accepted unless the computer's MAC address is registered beforehand. In this case, check the computer's MAC address using the following procedure and register it according to the operating instructions of the access point.1Display [Command Prompt].Windows XPSelect [Start] - [All Programs] - [Accessories] - [Command Prompt].Windows 2000Select [Start] - [Programs] - [Accessories] - [Command Prompt].2Input [ipconfig /all], and press Enter.3Make a note of the 12-digit string of alphanumerics displayed on "Physical Address" line on Wireless LAN side. Then input [exit], and press Enter.The IP address of the access point is wrongzFollowing the operating instructions of the access point, set the IP address of the access point again correctly.

Navigation menu